The line was too long already, and will be longer still when a later
change adds another argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assert that whenever there's a DWIM checkout that the index should be
clean afterwards, in addition to the correct branch being checked-out.
The way the DWIM checkout code in checkout.[ch] works is by looping
over all remotes, and for each remote trying to find if a given
reference name only exists on that remote, or if it exists anywhere
else.
This is done by starting out with a `unique = 1` tracking variable in
a struct shared by the entire loop, which will get set to `0` if the
data reference is not unique.
Thus if we find a match we know the dst_oid member of
tracking_name_data must be correct, since it's associated with the
only reference on the only remote that could have matched our query.
But if there was ever a mismatch there for some reason we might end up
with the correct branch checked out, but at the wrong oid, which would
show whatever the difference between the two staged in the
index (checkout branch A, stage changes from the state of branch B).
So let's amend the tests (mostly added in) 399e4a1c56 ("t2024: Add
tests verifying current DWIM behavior of 'git checkout <branch>'",
2013-04-21) to always assert that "status" is clean after we run
"checkout", that's being done with "-uno" because there's going to be
some untracked files related to the test itself which we don't care
about.
In all these tests (DWIM or otherwise) we start with a clean index, so
these tests are asserting that that's still the case after the
"checkout", failed or otherwise.
Then if we ever run into this sort of regression, either in the
existing code or with a new feature, we'll know.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v2.18.0-rc0~10^2~1 (refspec: consolidate ref-prefix generation
logic, 2018-05-16) factored out the ref-prefix generation code for
reuse, it left out the 'if (!item->exact_sha1)' test in the original
ref-prefix generation code. As a result, fetches by SHA-1 generate
ref-prefixes as though the SHA-1 being fetched were an abbreviated ref
name:
$ GIT_TRACE_PACKET=1 bin-wrappers/git -c protocol.version=2 \
fetch origin 12039e008f
[...]
packet: fetch> ref-prefix 12039e008f
packet: fetch> ref-prefix refs/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/tags/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/heads/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/remotes/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/remotes/12039e008f9a4e3394f3f94f8ea897785cb09448/HEAD
packet: fetch> 0000
If there is another ref name on the command line or the object being
fetched is already available locally, then that's mostly harmless.
But otherwise, we error out with
fatal: no matching remote head
since the server did not send any refs we are interested in. Filter
out the exact_sha1 refspecs to avoid this.
This patch adds a test to check this behavior that notices another
behavior difference between protocol v0 and v2 in the process. Add a
NEEDSWORK comment to clear it up.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a many tests assumed that newly created refs are made as
loose refs using the files backend, which have been updated to use
proper plumbing like rev-parse and update-ref, to avoid breakage
once we start using different ref backends.
* cc/tests-without-assuming-ref-files-backend:
t990X: use '.git/objects' as 'deep inside .git' path
t: make many tests depend less on the refs being files
"git rev-parse Y..." etc. misbehaved when given endpoints were
not committishes.
* en/rev-parse-invalid-range:
rev-parse: check lookup'ed commit references for NULL
The import-tars script (in contrib/) has been taught to handle
tarballs with overly long paths that use PAX extended headers.
* pa/import-tars-long-names:
import-tars: read overlong names from pax extended header
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
In the 2.18 cycle, directory rename detection was merged, then reverted,
then reworked in such a way to fix another prominent bug in addition to
the original problem causing it to be reverted. When the reworked series
was merged, we ended up with two nearly duplicate release notes. Remove
the second copy, but preserve the information about the extra bug fix.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our HTTP client code used to advertise that we accept gzip encoding
from the other side; instead, just let cURL library to advertise
and negotiate the best one.
* bw/remote-curl-compressed-responses:
remote-curl: accept compressed responses with protocol v2
remote-curl: accept all encodings supported by curl
Leak plugging.
* ma/unpack-trees-free-msgs:
unpack_trees_options: free messages when done
argv-array: return the pushed string from argv_push*()
merge-recursive: provide pair of `unpack_trees_{start,finish}()`
merge: setup `opts` later in `checkout_fast_forward()`
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
We used to call regfree() after regcomp() failed in some codepaths,
which have been corrected.
* ma/regex-no-regfree-after-comp-fail:
regex: do not call `regfree()` if compilation fails
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
By code restructuring of submodule merge in merge-recursive,
informational messages from the codepath are now given using the
same mechanism as other output, and honor the merge.verbosity
configuration. The code also learned to give a few new messages
when a submodule three-way merge resolves cleanly when one side
records a descendant of the commit chosen by the other side.
* sb/submodule-merge-in-merge-recursive:
merge-recursive: give notice when submodule commit gets fast-forwarded
merge-recursive: i18n submodule merge output and respect verbosity
submodule.c: move submodule merging to merge-recursive.c
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Error behaviour of "git grep" when it cannot read the index was
inconsistent with other commands that uses the index, which has
been corrected to error out early.
* sb/grep-die-on-unreadable-index:
grep: handle corrupt index files early
"git submodule update" attempts two different kinds of "git fetch"
against the upstream repository to grab a commit bound at the
submodule's path, but it incorrectly gave up if the first kind
(i.e. a normal fetch) failed, making the second "last resort" one
(i.e. fetching an exact commit object by object name) ineffective.
This has been corrected.
* sb/submodule-update-try-harder:
git-submodule.sh: try harder to fetch a submodule
Update credential-netrc helper (in contrib/) to allow customizing
the GPG used to decrypt the encrypted .netrc file.
* lm/credential-netrc:
git-credential-netrc: accept gpg option
git-credential-netrc: adapt to test framework for git
When a short hexadecimal string is used to name an object but there
are multiple objects that share the string as the prefix of their
names, the code lists these ambiguous candidates in a help message.
These object names are now sorted according to their types for
easier eyeballing.
* ab/get-short-oid:
get_short_oid: sort ambiguous objects by type, then SHA-1
sha1-name.c: move around the collect_ambiguous() function
git-p4: change "commitish" typo to "committish"
sha1-array.h: align function arguments
sha1-name.c: remove stray newline
Transfer protocol v2 learned to support the partial clone.
* jt/partial-clone-proto-v2:
{fetch,upload}-pack: support filter in protocol v2
upload-pack: read config when serving protocol v2
upload-pack: fix error message typo
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
Command line completion (in contrib/) learned to complete pathnames
for various commands better.
* sg/complete-paths:
t9902-completion: exercise __git_complete_index_file() directly
completion: don't return with error from __gitcomp_file_direct()
completion: fill COMPREPLY directly when completing paths
completion: improve handling quoted paths in 'git ls-files's output
completion: remove repeated dirnames with 'awk' during path completion
t9902-completion: ignore COMPREPLY element order in some tests
completion: use 'awk' to strip trailing path components
completion: let 'ls-files' and 'diff-index' filter matching paths
completion: improve handling quoted paths on the command line
completion: support completing non-ASCII pathnames
completion: simplify prefix path component handling during path completion
completion: move __git_complete_index_file() next to its helpers
t9902-completion: add tests demonstrating issues with quoted pathnames
Developer support. Use newer GCC on one of the builds done at
TravisCI.org to get more warnings and errors diagnosed.
* nd/travis-gcc-8:
travis-ci: run gcc-8 on linux-gcc jobs
"git update-ref A B" is supposed to ensure that ref A does not yet
exist when B is a NULL OID, but this check was not done correctly
for pseudo-refs outside refs/ hierarchy, e.g. MERGE_HEAD.
* ma/create-pseudoref-with-null-old-oid:
refs: handle zero oid for pseudorefs
t1400: add tests around adding/deleting pseudorefs
refs.c: refer to "object ID", not "sha1", in error messages
Code clean-up to turn history traversal more robust in a
semi-corrupt repository.
* jk/unavailable-can-be-missing:
mark_parents_uninteresting(): avoid most allocation
mark_parents_uninteresting(): replace list with stack
mark_parents_uninteresting(): drop missing object check
mark_tree_contents_uninteresting(): drop missing object check
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
the_repository->index is not a allocated piece of memory but
repo_clear() indiscriminately attempted to free(3) it, which has
been corrected.
* nd/repo-clear-keep-the-index:
repository: fix free problem with repo_clear(the_repository)
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
With merge.renames configuration set to false, the recursive merge
strategy can be told not to spend cycles trying to find renamed
paths and merge them accordingly.
* bp/merge-rename-config:
merge: pass aggressive when rename detection is turned off
merge: add merge.renames config setting
merge: update documentation for {merge,diff}.renameLimit
The implementation of "git rebase -i --root" has been updated to use
the sequencer machinery more.
* js/sequencer-and-root-commits:
rebase --rebase-merges: root commits can be cousins, too
rebase --rebase-merges: a "merge" into a new root is a fast-forward
sequencer: allow introducing new root commits
rebase -i --root: let the sequencer handle even the initial part
sequencer: learn about the special "fake root commit" handling
sequencer: extract helper to update active_cache_tree
"git send-email" can sometimes offer confirmation dialog "Send this
email?" with choices 'Yes', 'No', 'Quit', and 'All'. A new action
'Edit' has been added to this dialog's choice.
* dd/send-email-reedit:
git-send-email: allow re-editing of message
