* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
A command exiting with the expected status is not particularly
notable.
While the indication of progress might be useful when tracking down
where in a test a failure has happened, the same applies to most other
test helpers, which are quiet about success, so this single helper's
output stands out in an unpleasant way. An alternative method for
showing progress information might to invent a --progress option that
runs tests with "set -x", or until that is available, to run tests
using commands like
prove -v -j2 --shuffle --exec='sh -x' t2202-add-addremove.sh
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
This modest patch adds simple tests for git grep -P/--perl-regexp and
its interoperation with -i and -w.
Tests are only enabled when prerequisite LIBPCRE is defined (it's
automatically set based on USE_LIBPCRE in test-lib.sh).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of skipping the whole test, introduce test_i18ngrep wrapper that
pretends a successful result under GETTEXT_POISON build.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is too coarse-grained way that led to artificial splitting of a
logically single test case into "do" and "check only without poison".
As the majority of check is done by comparing expected and actual output
stored in a file with test_cmp anyway, just introduce test_i18ncmp that
pretends the actual output matched the expected one when gettext-poison
is in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 95a1d12e9b ("tests: scrub environment of GIT_* variables") all
environment variables starting with "GIT_" were unset for the tests using
a perl script rather than unsetting them one by one. Only three exceptions
were made to make them work as before: "GIT_TRACE*", "GIT_DEBUG*" and
"GIT_USE_LOOKUP".
Unfortunately some environment variables used by the test framework itself
were not added to the exceptions and thus stopped working when given
before the make command instead of after it. Those are:
- GIT_NOTES_TIMING_TESTS
- GIT_PATCHID_TIMING_TESTS
- GIT_PROVE_OPTS
- GIT_REMOTE_SVN_TEST_BIG_FILES
- GIT_SKIP_TESTS
- GIT_TEST*
- GIT_VALGRIND_OPTIONS
I noticed that when skipping a test the way I was used to suddenly failed:
GIT_SKIP_TESTS='t1234' GIT_TEST_OPTS='--root=/dev/shm' make -j10 test
This should work according to t/README, but didn't anymore, so let's fix
that by adding them to the exception list. And to avoid having a long
regexp put the exceptions in a separate variable using nicer formatting.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
Variables from the inherited environment that are meaningful to git
can break tests in undesirable ways. For example,
GIT_PAGER=more sh t5400-send-pack.sh -v -i
hangs. So unset all environment variables in the GIT_ namespace in
test-lib, with a few exceptions:
- GIT_TRACE* are useful for tracking down bugs exhibited by a failing
test;
- GIT_DEBUG* are GIT_TRACE variables by another name, practically
speaking. They should probably be tweaked to follow the
GIT_TRACE_foo scheme and use trace_printf machinery some time.
- GIT_USE_LOOKUP from v1.5.6-rc0~134^2~1 (sha1-lookup: more memory
efficient search in sorted list of SHA-1, 2007-12-29) is about
trying an alternate implementation strategy rather than changing
semantics and it can be useful to compare performance with and
without it set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set GIT_ATTR_NOSYSTEM in test-lib to make tests more reliable in two
ways:
- an invalid GIT_ATTR_NOSYSTEM setting should not cause tests to fail
with "fatal: bad config value for 'GIT_ATTR_NOSYSTEM'".
- /etc/gitattributes should not change the outcome of tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After v0.99.7~99 (Retire support for old environment variables,
2005-09-09), there is no more need to unset a stray AUTHOR_NAME
variable that might have entered the test environment.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:
pick abcd1234 foo
exec make test
will cause false negatives in the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/test-fixes:
t4135-*.sh: Skip the "backslash" tests on cygwin
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
Conflicts:
t/t3032-merge-recursive-options.sh
The BSLASHPSPEC tests (11-13) fail on cygwin, since you can't
create files containing an backslash character in the name.
In order to skip these tests, we simply stop (incorrectly)
asserting the BSLASHPSPEC prerequisite in test-lib.sh.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests using the fuzz_conflict helper function (tests 5-6)
fail on cygwin in the same way they used to on MinGW, prior
to commit ca02ad3. The solution is also the same; passing the
-b (--binary) option to sed, using the SED_OPTIONS variable.
We introduce a new prerequisite SED_STRIPS_CR to use in the
conditional initialisation of SED_OPTIONS, rather than MINGW.
The new prerequisite is set in test-lib.sh for both MinGW and
Cygwin.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX awk seems to explicitly not support hexadecimal escape sequences.
From http://pubs.opengroup.org/onlinepubs/009695399/:
Regular expressions in awk have been extended somewhat...
One sequence that is not supported is hexadecimal value escapes
beginning with '\x'.
This affects the awk on IRIX 6.5, and causes t4015.56 to fail.
Use octal instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is plumbing to prepare helpers like test_terminal to notice buggy
test scripts that do not declare all of the necessary prerequisites.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, MSYS grep reads in text-mode and converts CRLF into LF line
endings. For testing HTTP use binary mode (-U) as checking is done for
CR in HTTP headers
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_create_repo code added in v1.2.2~6 to use a subshell
instead of keeping track of the old working directory and cd-ing back
when it's done.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test has no prerequisites satisfied (the usual case), instead
of "missing THING of THING", just say "missing THING". This does not
affect the output when a test is skipped due to a missing
prerequisites if another prerequisite is satisfied.
For example: instead of
ok 8 # skip notes work (missing EXPENSIVE of EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
write
ok 8 # skip notes work (missing EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that test the test-lib.sh itself need to be executed in the
dynamically created trash directory, so we can't assume
$TEST_DIRECTORY is ../ for those.
As a side benefit this change also makes it easy for us to move the
t/*.sh tests into subdirectories if we ever want to do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code that used $TEST_DIRECTORY/.. to use $GIT_BUILD_DIR
instead, the two are equivalent, but the latter is easier to read.
This required moving the assignment od GIT_BUILD_DIR to earlier in the
test-lib.sh file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the redundant calls to $(pwd) to use $TEST_DIRECTORY
instead. None of these were being executed after we cd'd somewhere
else so they weren't actually needed.
This also makes it easier to add support for overriding the test
library location and run tests in a different directory than t/.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new variable $GIT_BUILD_DIR which can be used to locate
data that resides under the build directory, and use that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect and report hard-to-notice spelling mistakes like
test_might_fail "git config --unset whatever"
(the extra quotes prevent the shell from running git as intended;
instead, the shell looks for a "git config --unset whatever" file).
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let test_might_fail say something about its failures for consistency
with test_must_fail.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of it is to run a command that produces failure. A
missing command is more likely an error in the test script
(e.g., using 'test_must_fail "command with arguments"', or
relying on a missing command).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because test_must_fail fails when a command succeeds, the
command frequently does not produce any output (since, after
all, it thought it was succeeding). So let's have
test_must_fail itself report that a problem occurred.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
The support for multiple test prerequisites added by me in "test-lib:
Add support for multiple test prerequisites" was broken.
The for iterated over each prerequisite and returned true/false within
a case statement, but since it missed a return statement only the last
prerequisite in the list of prerequisites was ever considered, the
rest were ignored.
Fix that by changing the test_have_prereq code to something less
clever that keeps a count of the total prereqs and the ones we have
and compares the count at the end.
This comes with the added advantage that it's easy to list the missing
prerequisites in the test output, implement that while I'm at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test output to print needed prerequisites as part of the
TAP. This makes it easy to see at a glance why a test was
skipped. Before:
ok 7 # skip <message>
ok 9 # skip <message>
After:
ok 7 # skip <message> (prereqs: DONTHAVEIT)
ok 9 # skip <message> (prereqs: HAVEIT,DONTHAVEIT)
This'll also be useful for smoke testing output, where the developer
reading the output may not be familiar with the system where tests are
being skipped.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP harnesses don't need to read test-results/*, since they keep track
of the number of passing/failing tests internally. Skip the generation
of these files when HARNESS_ACTIVE is set.
It's now possible to run the Git test suite without writing anything
to the t/ directory at all if you use a TAP harness and the --root
switch:
cd t
sudo mount -t tmpfs none /tmp/memory -o size=300m
prove -j9 ./t[0-9]*.sh :: --root=/tmp/memory
The I/O that the ~500 test-results/* files contributed was very
minimal, but I thought this was worth mentioning.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Otherwise running individual tests from t/ directory may lack the definition
of $DIFF, $GIT_TEST_CMP and friends.
Noticed and initial patch provided by Thomas Rast, alternative solution
suggested by Brandon Casey, which this patch implements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
In 3bf7886 (test-lib: Let tests specify commands to be run at end of
test, 2010-05-02), the git test harness learned to run cleanup
commands unconditionally at the end of a test. During each test,
the intended cleanup actions are collected in the test_cleanup variable
and evaluated. That variable looks something like this:
eval_ret=$?; clean_something && (exit "$eval_ret")
eval_ret=$?; clean_something_else && (exit "$eval_ret")
eval_ret=$?; final_cleanup && (exit "$eval_ret")
eval_ret=$?
All cleanup actions are run unconditionally but if one of them fails
it is properly reported through $eval_ret.
On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’
to 0 instead of the exit status of the previous command. This results
in tests using test_expect_code appearing to fail and all others
appearing to pass, unless their cleanup fails. Avoid the problem by
setting eval_ret before the ‘eval’ begins.
Thanks to Jeff King for the explanation.
Cc: Jeff King <peff@peff.net>
Cc: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain actions can imply that if the test fails early, recovery from
within other tests is too much to expect:
- creating unwritable directories, like the EACCESS test in t0001-init
- setting unusual configuration, like user.signingkey in t7004-tag
- crashing and leaving the index lock held, like t3600-rm once did
Some test scripts work around this by running cleanup actions outside
the supervision of the test harness, with the unfortunate consequence
that those commands are not appropriately echoed and their output not
suppressed. Others explicitly save exit status, clean up, and then
reset the exit status within the tests, which has excellent behavior
but makes the tests hard to read. Still others ignore the problem.
Allow tests a fourth option: by calling this function, tests can
stack up commands they would like to be run to clean up.
Commands passed to test_when_finished during a test are
unconditionally run in the test environment immediately before the
test is completed, in last-in-first-out order. If some cleanup
command fails, then the other cleanup commands are still run before
the failure is reported and the test script allowed to continue.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dear Junio,
this is a resend of relicensing patch for test suite library, which
was initially sent by Carl Worth. Since the time you sent me acks for
this patch collected by you, I collected 8 additional acks as is
documented at
https://git.wiki.kernel.org/index.php/Test-lib_reclicensing. There are
still three contributors missing: Bert Wesarg, Stephan Beyer and Bryan
Donlan. The contributions of first two are clearly not copyrightable.
I'm not sure about the copyrightability of Bryan Donlan's
contributions (git log -p --author='Bryan Donlan' t/test-lib.sh).
Carl told me that in your ack collection process you missed only three
acks. So I wonder whether you already did some analysis of which
contributions are copyrightable. If so, are the missing acks in the
list bellow?
Thanks
Michal
8<--------8<--------8<--------
This file has had no explicit license information noted in it, but
has clearly been created and modified according to the terms of GPLv2
as with the rest of the git code base.
The purpose of relicensing is to allow other GPLv3+ projects (in
particular, the notmuch project: http://notmuchmail.org) to use this
same test-suite structure and to contribute changes back as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: David Reiss <dreiss@facebook.com>
Acked-by: Emil Sit <sit@emilsit.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Gerrit Pape <pape@smarden.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Lea Wiemann <lewiemann@gmail.com>
Acked-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Martin Waitz <tali@admingilde.org>
Acked-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Acked-by: Matthias Lederhofer <matled@gmx.net>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exporting TEST_DIRECTORY and TRASH_DIRECTORY to test_external, for
external tests to be able to find test script (and git sources), and
to find trash directory (usually with test repository in it).
Add also exporting GIT_TEST_LONG, so that external test can skip
time-intensive tests unless test is invoked with `--long' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these tests are removing files, environment variables, and
configuration that might interfere outside the test. Putting these
clean-up commands in the test (in the same spirit as v1.7.1-rc0~59,
2010-03-20) means that errors during setup will be caught quickly and
non-error text will be suppressed without -v.
While at it, apply some other minor fixes:
- do not rely on the shell to export variables defined with the same
command as a function call
- avoid whitespace immediately after the > redirection operator, for
consistency with the style of other tests
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
* mo/bin-wrappers:
INSTALL: document a simpler way to run uninstalled builds
run test suite without dashed git-commands in PATH
build dashless "bin-wrappers" directory similar to installed bindir
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Move a useful script function to decode colored output to
text form from t4034 and use it in this test as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, test-lib checks that the git_remote_helpers
directory has been built. However, if we are building
without python, we will not have done anything at all in
that directory, and test-lib's sanity check will fail.
We bump the inclusion of GIT-BUILD-OPTIONS further up in
test-lib; it contains configuration, and as such should be
read before we do any checks (and in this particular case,
we need its value to do our check properly).
Signed-off-by: Jeff King <peff@peff.net>
Looks-fine-to-me-by: Brandon Casey <brandon.casey.ctr@nrlssc.navy.mil>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only put bin-wrappers in the PATH (not GIT_EXEC_PATH), to emulate the
default installed user environment, and ensure all the programs run
correctly in such an environment. This is now the default, although
it can be overridden with a --with-dashes test option when running
tests.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces parts of a Python package called
"git_remote_helpers" containing the building blocks for
remote helpers written in Python.
No actual remote helpers are part of this patch, this patch only
includes the common basics needed to start writing such helpers.
The patch includes the necessary Makefile additions to build and
install the git_remote_helpers Python package along with the rest of
Git.
This patch is based on Johan Herland's git_remote_cvs patch and
has been improved by the following contributions:
- David Aguilar: Lots of Python coding style fixes
- David Aguilar: DESTDIR support in Makefile
Cc: David Aguilar <davvid@gmail.com>
Cc: Johan Herland <johan@herland.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds basic boilerplate support (based on corresponding Perl
sections) for enabling the building and installation Python scripts.
There are currently no Python scripts being built, and when Python
scripts are added in future patches, their building and installation
can be disabled by defining NO_PYTHON.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to use $VISUAL and fall back to $EDITOR if TERM is unset
or set to "dumb". Traditionally, VISUAL is set to a screen
editor and EDITOR to a line-based editor, which should be more
useful in that situation.
vim, for example, is happy to assume a terminal supports ANSI
sequences even if TERM is dumb (e.g., when running from a text
editor like Acme). git already refuses to fall back to vi on a
dumb terminal if GIT_EDITOR, core.editor, VISUAL, and EDITOR are
unset, but without this patch, that check is suppressed by
VISUAL=vi.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
