adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long messages like those from lockfile.c when a lock can't be
obtained truncate with only 256 bytes in the message buffer.
Bump it to 1024 to give more space for these longer cases.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a 32-bit system, the maximum possible size for an object is less than
4GB, while 64-bit systems may cope with larger objects. Due to this
limitation, variables holding object sizes are using an unsigned long
type (32 bits on 32-bit systems, or 64 bits on 64-bit systems).
When large objects are encountered, and/or people play with large delta
depth values, it is possible for the maximum allowed delta size
computation to overflow, especially on a 32-bit system. When this
occurs, surviving result bits may represent a value much smaller than
what it is supposed to be, or even zero. This prevents some objects
from being deltified although they do get deltified when a smaller depth
limit is used. Fix this by always performing a 64-bit multiplication.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code will end up calling lstat() to check whether the
file still exists; obviously this doesn't work if we're not
in the worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --pickaxe-regex is used, forward past the end of matches instead of
advancing to the byte after their start. This way matches count only
once, even if the regular expression matches their tail -- like in the
fixed-string fork of the code.
E.g.: /.*/ used to count the number of bytes instead of the number of
lines. /aa/ resulted in a count of two in "aaa" instead of one.
Also document the fact that regexec() needs a NUL-terminated string as
its second argument by adding an assert().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config file is not the only place remotes are defined, and without
consulting .git/remotes and .git/branches, you won't know if "origin" is
configured by the user. Don't give up too early and insult the user with
a wisecrack "Where do you want to fetch from today?"
The only thing the previous patch seems to want to prevent from happening
is a lazy "git fetch/push" that does not say where-from/to to produce an
error message 'origin not found', and we can do that by not letting
add_url_alias() to turn a nickname "origin" literally into a pathname
"origin" without changing the rest of the logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
bisect: fix another instance of eval'ed string
bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped
Support "\" in non-wildcard exclusion entries
Conflicts:
git-bisect.sh
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* js/maint-1.6.1-remote-remove-mirror:
builtin-remote: make rm operation safer in mirrored repository
builtin-remote: make rm() use properly named variable to hold return value
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3e0c4ff (send-email: respect in-reply-to regardless of threading,
2009-03-01) fixed the handling of the In-Reply-To header when both
--no-thread and --in-reply-to are in effect. Add a test for it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
