If receive a request like:
git-upload-pack /foo.git\0host=localhost
we mark the offset of the NUL byte as "len", and then log
the bytes after the NUL with a "%.*s" placeholder, using
"pktlen - len" as the length, and "line + len + 1" as the
start of the string.
This is off-by-one, since the start of the string skips past
the separating NUL byte, but the adjusted length includes
it. Fortunately this doesn't actually read past the end of
the buffer, since "%.*s" will stop when it hits a NUL. And
regardless of what is in the buffer, packet_read() will
always add an extra NUL terminator for safety.
As an aside, the git.git client sends an extra NUL after a
"host" field, too, so we'd generally hit that one first, not
the one added by packet_read(). You can see this in the test
output which reports 15 bytes, even though the string has
only 14 bytes of visible data. But the point is that even a
client sending unusual data could not get us to read past
the end of the buffer, so this is purely a cosmetic fix.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start git-daemon for our tests, we send its stderr
log stream to a named pipe. We synchronously read the first
line to make sure that the daemon started, and then dump the
rest to descriptor 4. This is handy for debugging test
output with "--verbose", but the tests themselves can't
access the log data.
Let's dump the log into a file, as well, so that future
tests can check the log. There are a few subtleties worth
calling out here:
- we'll continue to send output to descriptor 4 for
viewing/debugging, which would imply swapping out "cat"
for "tee". But we want to ensure that there's no
buffering, and "tee" doesn't have a standard way to
ask for that. So we'll use a shell loop around "read"
and "printf" instead. That ensures that after a request
has been served, the matching log entries will have made
it to the file.
- the existing first-line shell loop used read/echo. We'll
switch to consistently using "read -r" and "printf" to
relay data as faithfully as possible.
- we open the logfile for append, rather than just output.
That makes it OK for tests to truncate the logfile
without restarting the daemon (the OS will atomically
seek to the end of the file when outputting each line).
That allows tests to look at the log without worrying
about pollution from earlier tests.
Helped-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually care about the clone operation here; we
just want to know if we were able to actually contact the
remote repository. Using ls-remote does that more
efficiently, and without us having to worry about managing
the tmp.git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently introduced regression caused a segfault at clone time on
case-insensitive filesystems when filenames differing only in case are
present. This bug has already been fixed (repository: pre-initialize
hash algo pointer, 2018-01-18), but it's not the first time similar
problems have arisen. Therefore, introduce a test to catch this case and
protect against future regressions.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are various git subcommands (among them, clone) which don't set up
the repository (that is, they lack RUN_SETUP or RUN_SETUP_GENTLY) but
end up needing to have information about the hash algorithm in use.
Because the hash algorithm is part of struct repository and it's only
initialized in repository setup, we can end up dereferencing a NULL
pointer in some cases if we call one of these subcommands and look up
the empty blob or empty tree values.
A "git clone" of a project that has two paths that differ only in
case suffers from this if it is run on a case insensitive platform.
When the command attempts to check out one of these two paths after
checking out the other one, the checkout codepath needs to see if
the version that is already on the filesystem (which should not
happen if the FS were case sensitive) is dirty, and it needs to
exercise the hashing code at that point.
In the future, we can add a command line option for this or read it
from the configuration, but until we're ready to expose that
functionality to the user, simply initialize the repository
structure to use the current hash algorithm, SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 89a70b80 ("t0302 & t3900: add forgotten quotes", 2018-01-03), quotes
were added to protect against spaces in $HOME. In the test_when_finished
command, two files are deleted which must be quoted individually.
[jc: with \$HOME in the test_when_finished command quoted, as
pointed out by j6t].
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: do not look at the index during recursive merge
"git rebase -p -X<option>" did not propagate the option properly
down to underlying merge strategy backend.
* js/fix-merge-arg-quoting-in-rebase-p:
rebase -p: fix quoting when calling `git merge`
Git's assumption that all path lists are colon-separated is not only
wrong on Windows, it is not even an assumption that is compatible with
POSIX.
In the interest of time, let's not try to fix this properly but simply
work around the obvious breakage on Windows, where the MSYS2 Bash used
by Git for Windows to interpret the Git's Unix shell scripts will
automagically convert path lists in the environment to
semicolon-separated lists of Windows paths (with drive letter and the
corresponding colon and all that jazz).
In other words, we simply look whether there is a semicolon in
GITPERLLIB and split by semicolons if found instead of colons. This is
not fool-proof, of course, as the path list could consist of a single
path. But that is not the case in Git for Windows' test suite, there are
always two paths in GITPERLLIB.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid repeatedly testing the same tree in TravisCI that have been
tested successfully already.
* sg/travis-skip-identical-test:
travis-ci: record and skip successfully built trees
travis-ci: create the cache directory early in the build process
travis-ci: print the "tip of branch is exactly at tag" message in color
Tying loose ends for the recent integration work of
collision-detecting SHA-1 implementation.
* ab/dc-sha1-loose-ends:
Makefile: NO_OPENSSL=1 should no longer imply BLK_SHA1=1
Assorted updates for TravisCI integration.
* sg/travis-fixes:
travis-ci: only print test failures if there are test results available
travis-ci: save prove state for the 32 bit Linux build
travis-ci: don't install default addon packages for the 32 bit Linux build
travis-ci: fine tune the use of 'set -x' in 'ci/*' scripts
* 'js/misc-git-gui-stuff' of ../git-gui:
git-gui: allow Ctrl+T to toggle multiple paths
git-gui: fix exception when trying to stage with empty file list
git-gui: avoid exception upon Ctrl+T in an empty list
git gui: fix staging a second line to a 1-line file
It is possible to select multiple files in the "Unstaged Changes" and
the "Staged Changes" lists. But when hitting Ctrl+T, surprisingly only
one entry is handled, not all selected ones.
Let's just use the same code path as for the "Stage To Commit" and the
"Unstage From Commit" menu items.
This fixes https://github.com/git-for-windows/git/issues/1012
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is nothing to stage, there is nothing to stage. Let's not try
to, even if the file list contains nothing at all.
This fixes https://github.com/git-for-windows/git/issues/1075
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously unstaged files can be staged by clicking on them and then
pressing Ctrl+T. Conveniently, the next unstaged file is selected
automatically so that the unstaged files can be staged by repeatedly
pressing Ctrl+T.
When a user hits Ctrl+T one time too many, though, Git GUI used to throw
this exception:
expected number but got ""
expected number but got ""
while executing
"expr {int([lindex [$w tag ranges in_diff] 0])}"
(procedure "toggle_or_diff" line 13)
invoked from within
"toggle_or_diff toggle .vpane.files.workdir.list "
(command bound to event)
Let's just avoid that by skipping the operation when there are no more
files to stage.
This fixes https://github.com/git-for-windows/git/issues/1060
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a 1-line file is augmented by a second line, and the user tries to
stage that single line via the "Stage Line" context menu item, we do not
want to see "apply: corrupt patch at line 5".
The reason for this error was that the hunk header looks like this:
@@ -1 +1,2 @@
but the existing code expects the original range always to contain a
comma. This problem is easily fixed by cutting the string "1 +1,2"
(that Git GUI formerly mistook for the starting line) at the space.
This fixes https://github.com/git-for-windows/git/issues/515
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging another branch into ours, if their tree is the same as
the common ancestor's, we can declare that our tree represents the
result of three-way merge. In such a case, the recursive merge
backend incorrectly used to create a commit out of our index, even
when the index has changes.
A recent fix attempted to prevent this by adding a comparison
between "our" tree and the index, but forgot that this check must be
restricted only to the outermost merge. Inner merges performed by
the recursive backend across merge bases are by definition made from
scratch without having any local changes added to the index. The
call to index_has_changes() during an inner merge is working on the
index that has no relation to the merge being performed, preventing
legitimate merges from getting carried out.
Fix it by limiting the check to the outermost merge.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c3a9ad3117 ("oidset: add iterator methods to oidset", 2017-11-21)
introduced a 'oidset_init()' function in oidset.h, which has void as
return type, but returns an expression.
This makes the solaris compiler fail with:
"oidset.h", line 30: void function cannot return value
As the return type is void, and even the return type of the expression
we're trying to return (oidmap_init) is void just remove the return
statement to fix the compiler error.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
