"git send-email --transfer-encoding=..." in recent versions of Git
sometimes produced an empty "Content-Transfer-Encoding:" header,
which has been corrected.
* al/send-email-auto-cte-fixup:
send-email: avoid empty transfer encoding header
The history traversal used to implement the tag-following has been
optimized by introducing a new helper.
* ds/add-missing-tags:
remote: make add_missing_tags() linear
test-reach: test get_reachable_subset
commit-reach: implement get_reachable_subset
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
Unify code to read the author-script used in "git am" and the
commands that use the sequencer machinery, e.g. "git rebase -i".
* pw/am-rebase-read-author-script:
sequencer: use read_author_script()
add read_author_script() to libgit
am: rename read_author_script()
am: improve author-script error reporting
am: don't die in read_author_script()
Replace three string-list instances used as look-up tables in "git
fetch" with hashmaps.
* jc/war-on-string-list:
fetch: replace string-list used as a look-up table with a hashmap
"git rev-parse --exclude=* --branches --branches" (i.e. first
saying "add only things that do not match '*' out of all branches"
and then adding all branches, without any exclusion this time")
worked as expected, but "--exclude=* --all --all" did not work the
same way, which has been fixed.
* ag/rev-parse-all-exclude-fix:
rev-parse: clear --exclude list after 'git rev-parse --all'
"git fetch" was a bit loose in parsing resposes from the other side
when talking over the protocol v2.
* jt/tighten-fetch-proto-v2-response:
fetch-pack: be more precise in parsing v2 response
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
A couple of tests used to leave the repository in a state that is
deliberately corrupt, which have been corrected.
* ab/pack-tests-cleanup:
index-pack tests: don't leave test repo dirty at end
pack-objects tests: don't leave test .git corrupt at end
pack-objects test: modernize style
Tests for the recently introduced multi-pack index machinery.
* ds/test-multi-pack-index:
packfile: close multi-pack-index in close_all_packs
multi-pack-index: define GIT_TEST_MULTI_PACK_INDEX
midx: close multi-pack-index on repack
midx: fix broken free() in close_midx()
A pattern with '**' that does not have a slash on either side used
to be an invalid one, but the code now treats such double-asterisks
the same way as two normal asterisks that happen to be adjacent to
each other.
* nd/wildmatch-double-asterisk:
wildmatch: change behavior of "foo**bar" in WM_PATHNAME mode
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
Additional comment on a tricky piece of code to help developers.
* jk/stream-pack-non-delta-clarification:
read_istream_pack_non_delta(): document input handling
"git ls-remote $there foo" was broken by recent update for the
protocol v2 and stopped showing refs that match 'foo' that are not
refs/{heads,tags}/foo, which has been fixed.
* jk/proto-v2-ref-prefix-fix:
ls-remote: pass heads/tags prefixes to transport
ls-remote: do not send ref prefixes for patterns
A regression in Git 2.12 era made "git fsck" fall into an infinite
loop while processing truncated loose objects.
* jk/detect-truncated-zlib-input:
cat-file: handle streaming failures consistently
check_stream_sha1(): handle input underflow
t1450: check large blob in trailing-garbage test
Split the overly large Documentation/config.txt file into million
little pieces. This potentially allows each individual piece
included into the manual page of the command it affects more easily.
* nd/config-split: (81 commits)
config.txt: remove config/dummy.txt
config.txt: move worktree.* to a separate file
config.txt: move web.* to a separate file
config.txt: move versionsort.* to a separate file
config.txt: move user.* to a separate file
config.txt: move url.* to a separate file
config.txt: move uploadpack.* to a separate file
config.txt: move uploadarchive.* to a separate file
config.txt: move transfer.* to a separate file
config.txt: move tag.* to a separate file
config.txt: move submodule.* to a separate file
config.txt: move stash.* to a separate file
config.txt: move status.* to a separate file
config.txt: move splitIndex.* to a separate file
config.txt: move showBranch.* to a separate file
config.txt: move sequencer.* to a separate file
config.txt: move sendemail-config.txt to config/
config.txt: move reset.* to a separate file
config.txt: move rerere.* to a separate file
config.txt: move repack.* to a separate file
...
Our test scripts can now take the '-V' option as a synonym for the
'--verbose-log' option.
* sg/test-verbose-log:
test-lib: introduce the '-V' short option for '--verbose-log'
The "container" mode of TravisCI is going away. Our .travis.yml
file is getting prepared for the transition.
* ss/travis-ci-force-vm-mode:
travis-ci: no longer use containers
Windows port learned to use nano-second resolution file timestamps.
* js/mingw-ns-filetime:
mingw: implement nanosecond-precision file times
mingw: replace MSVCRT's fstat() with a Win32-based implementation
mingw: factor out code to set stat() data
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
"git send-email" learned to disable SMTP authentication via the
"--smtp-auth=none" option, even when the smtp username is given
(which turns the authentication on by default).
* jw/send-email-no-auth:
send-email: explicitly disable authentication
The command line completion machinery (in contrib/) has been
updated to allow the completion script to tweak the list of options
that are reported by the parse-options machinery correctly.
* nd/completion-negation:
completion: fix __gitcomp_builtin no longer consider extra options
"git fetch" over protocol v2 into a shallow repository failed to
fetch full history behind a new tip of history that was diverged
before the cut-off point of the history that was previously fetched
shallowly.
* jt/upload-pack-v2-fix-shallow:
upload-pack: clear flags before each v2 request
upload-pack: make want_obj not global
upload-pack: make have_obj not global
Some codepaths failed to form a proper URL when .gitmodules record
the URL to a submodule repository as relative to the repository of
superproject, which has been corrected.
* sb/submodule-url-to-absolute:
submodule helper: convert relative URL to absolute URL if needed
"git repack" in a shallow clone did not correctly update the
shallow points in the repository, leading to a repository that
does not pass fsck.
* js/shallow-and-fetch-prune:
repack -ad: prune the list of shallow commits
shallow: offer to prune only non-existing entries
repack: point out a bug handling stale shallow info
The logic to determine the archive type "git archive" uses did not
correctly kick in for "git archive --remote", which has been
corrected.
* js/remote-archive-dwimfix:
archive: initialize archivers earlier
The value of timeout starts as an int value, and for this reason it
cannot overflow unsigned long long aka ULONGLONG. The unsigned version
of this initial value is available in orig_timeout. The difference
(orig_timeout - elapsed) cannot wrap around because it is protected by
a conditional (as can be seen in the patch text). Hence, the ULONGLONG
difference can only have values that are smaller than the initial
timeout value and truncation to int cannot overflow.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
[j6t: improved both implementation and log message]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with recent cURL library, http.sslBackend configuration
variable can be used to choose a different SSL backend at runtime.
The Windows port uses this mechanism to switch between OpenSSL and
Secure Channel while talking over the HTTPS protocol.
* js/mingw-http-ssl:
http: when using Secure Channel, ignore sslCAInfo by default
http: add support for disabling SSL revocation checks in cURL
http: add support for selecting SSL backends at runtime
New "--pretty=format:" placeholders %GF and %GP that show the GPG
key fingerprints have been invented.
* mg/gpg-fingerprint:
gpg-interface.c: obtain primary key fingerprint as well
gpg-interface.c: support getting key fingerprint via %GF format
gpg-interface.c: use flags to determine key/signer info presence
Detect and reject a signature block that has more than one GPG
signature.
* mg/gpg-parse-tighten:
gpg-interface.c: detect and reject multiple signatures on commits
Further clean-up of merge-recursive machinery.
* en/merge-cleanup-more:
merge-recursive: avoid showing conflicts with merge branch before HEAD
merge-recursive: improve auto-merging messages with path collisions
The add_missing_tags() method currently has quadratic behavior.
This is due to a linear number (based on number of tags T) of
calls to in_merge_bases_many, which has linear performance (based
on number of commits C in the repository).
Replace this O(T * C) algorithm with an O(T + C) algorithm by
using get_reachable_subset(). We ignore the return list and focus
instead on the reachable_flag assigned to the commits we care
about, because we need to interact with the tag ref and not just
the commit object.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_reachable_subset() method returns the list of commits in
the 'to' array that are reachable from at least one commit in the
'from' array. Add tests that check this method works in a few
cases:
1. All commits in the 'to' list are reachable. This exercises the
early-termination condition.
2. Some commits in the 'to' list are reachable. This exercises the
loop-termination condition.
3. No commits in the 'to' list are reachable. This exercises the
NULL return condition.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing reachability algorithms in commit-reach.c focus on
finding merge-bases or determining if all commits in a set X can
reach at least one commit in a set Y. However, for two commits sets
X and Y, we may also care about which commits in Y are reachable
from at least one commit in X.
Implement get_reachable_subset() which answers this question. Given
two arrays of commits, 'from' and 'to', return a commit_list with
every commit from the 'to' array that is reachable from at least
one commit in the 'from' array.
The algorithm is a simple walk starting at the 'from' commits, using
the PARENT2 flag to indicate "this commit has already been added to
the walk queue". By marking the 'to' commits with the PARENT1 flag,
we can determine when we see a commit from the 'to' array. We remove
the PARENT1 flag as we add that commit to the result list to avoid
duplicates.
The order of the resulting list is a reverse of the order that the
commits are discovered in the walk.
There are a couple shortcuts to avoid walking more than we need:
1. We determine the minimum generation number of commits in the
'to' array. We do not walk commits with generation number
below this minimum.
2. We count how many distinct commits are in the 'to' array, and
decrement this count when we discover a 'to' commit during the
walk. If this number reaches zero, then we can terminate the
walk.
Tests will be added using the 'test-tool reach' helper in a
subsequent commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a small bug introduced by "7a36987ff (send-email: add an auto option
for transfer encoding, 2018-07-14)".
I saw the following message when setting --transfer-encoding for a file
with the same encoding:
$ git send-email --transfer-encoding=8bit example.patch
Use of uninitialized value $xfer_encoding in concatenation (.) or string
at /usr/lib/git-core/git-send-email line 1744.
The new tests are by brian m. carlson.
Signed-off-by: Aaron Lindsay <aaron@aclindsay.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is in general a good idea for regression test cases to be as
independent of each other as possible (with the one exception of an
initial `setup` test case, which is only a test case in Git's test suite
because it does not have a notion of a fixture or setup).
This patch addresses one particular instance of this principle being
violated: a few test cases in t3418-rebase-continue.sh depend on a side
effect of a test case that verifies a specific `rebase -p` behavior. The
later test cases should, however, still succeed even if the `rebase -p`
test case is skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
