Some build machines started consistently failing to fetch updated
source using "repo sync", with error
error: The last gc run reported the following. Please correct the root cause
and remove /build/.repo/projects/tools/git.git/gc.log.
Automatic cleanup will not be performed until the file is removed.
warning: There are too many unreachable loose objects; run 'git prune' to remove them.
The cause takes some time to describe.
In v2.0.0-rc0~145^2 (gc: config option for running --auto in
background, 2014-02-08), "git gc --auto" learned to run in the
background instead of blocking the invoking command. In this mode, it
closed stderr to avoid interleaving output with any subsequent
commands, causing warnings like the above to be swallowed; v2.6.3~24^2
(gc: save log from daemonized gc --auto and print it next time,
2015-09-19) addressed that by storing any diagnostic output in
.git/gc.log and allowing the next "git gc --auto" run to print it.
To avoid wasteful repeated fruitless gcs, when gc.log is present, the
subsequent "gc --auto" would die after printing its contents. Most
git commands, such as "git fetch", ignore the exit status from "git gc
--auto" so all is well at this point: the user gets to see the error
message, and the fetch succeeds, without a wasteful additional attempt
at an automatic gc.
External tools like repo[1], though, do care about the exit status
from "git gc --auto". In non-daemonized mode, the exit status is
straightforward: if there is an error, it is nonzero, but after a
warning like the above, the status is zero. The daemonized mode, as a
side effect of the other properties provided, offers a very strange
exit code convention:
- if no housekeeping was required, the exit status is 0
- the first real run, after forking into the background, returns exit
status 0 unconditionally. The parent process has no way to know
whether gc will succeed.
- if there is any diagnostic output in gc.log, subsequent runs return
a nonzero exit status to indicate that gc was not triggered.
There's nothing for the calling program to act on on the basis of that
error. Use status 0 consistently instead, to indicate that we decided
not to run a gc (just like if no housekeeping was required). This
way, repo and similar tools can get the benefit of the same behavior
as tools like "git fetch" that ignore the exit status from gc --auto.
Once the period of time described by gc.pruneExpire elapses, the
unreachable loose objects will be removed by "git gc --auto"
automatically.
[1] https://gerrit-review.googlesource.com/c/git-repo/+/10598/
Reported-by: Andrii Dehtiarov <adehtiarov@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new negotiation algorithm used during fetch that skips
commits in an effort to find common ancestors faster. The skips grow
similarly to the Fibonacci sequence as the commit walk proceeds further
away from the tips. The skips may cause unnecessary commits to be
included in the packfile, but the negotiation step typically ends more
quickly.
Usage of this algorithm is guarded behind the configuration flag
fetch.negotiationAlgorithm.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current description of "core.ignoreCase" reads like an option which
is intended to be changed by the user while it's actually expected to
be set by Git on initialization only. Subsequently, Git relies on the
proper configuration of this variable, as noted by Bryan Turner [1]:
Git on a case-insensitive filesystem (APFS, HFS+, FAT32, exFAT,
vFAT, NTFS, etc.) is not designed to be run with anything other
than core.ignoreCase=true.
[1] https://marc.info/?l=git&m=152998665813997&w=2
mid:CAGyf7-GeE8jRGPkME9rHKPtHEQ6P1+ebpMMWAtMh01uO3bfy8w@mail.gmail.com
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support git-grep(1)'s new option, '--column', document and teach
grep.c how to interpret relevant configuration options, similar to those
associated with '--line-number'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a link to gitsubmodules(7) under the `submodule.active` entry in
git-config(1).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lineNumber has casing that is inconsistent with surrounding options,
like color.grep.matchContext, and color.grep.matchSelected. Re-case this
documentation in order to be consistent with the text around it, and to
ensure that new entries are consistent, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "checkout" documentation describes:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat
as equivalent to [...] <remote>/<branch.
This is a really useful feature. The problem is that when you add
another remote (e.g. a fork), git won't find a unique branch name
anymore, and will instead print this unhelpful message:
$ git checkout master
error: pathspec 'master' did not match any file(s) known to git
Now it will, on my git.git checkout, print:
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
Note that the "error: pathspec[...]" message is still printed. This is
because whatever else checkout may have tried earlier, its final
fallback is to try to resolve the argument as a path. E.g. in this
case:
$ ./git --exec-path=$PWD checkout master pu
error: pathspec 'master' did not match any file(s) known to git.
error: pathspec 'pu' did not match any file(s) known to git.
There we don't print the "hint:" implicitly due to earlier logic
around the DWIM fallback. That fallback is only used if it looks like
we have one argument that might be a branch.
I can't think of an intrinsic reason for why we couldn't in some
future change skip printing the "error: pathspec[...]" error. However,
to do so we'd need to pass something down to checkout_paths() to make
it suppress printing an error on its own, and for us to be confident
that we're not silencing cases where those errors are meaningful.
I don't think that's worth it since determining whether that's the
case could easily change due to future changes in the checkout logic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
Commit 76f5df305b (log: decorate grafted commits with "grafted" -
2011-08-18) lets us decorate grafted commits but I forgot about the
color.decorate.* config.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
"git rebase" learned "--rebase-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i --rebase-merges: add a section to the man page
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
pull: accept --rebase=merges to recreate the branch topology
rebase --rebase-merges: avoid "empty merges"
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase --rebase-merges: add test for --keep-empty
rebase: introduce the --rebase-merges option
rebase-helper --make-script: introduce a flag to rebase merges
sequencer: fast-forward `merge` commands, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: offer helpful advice when a command was rescheduled
sequencer: refactor how original todo list lines are accessed
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
"git gc" in a large repository takes a lot of time as it considers
to repack all objects into one pack by default. The command has
been taught to pretend as if the largest existing packfile is
marked with ".keep" so that it is left untouched while objects in
other packs and loose ones are repacked.
* nd/repack-keep-pack:
pack-objects: show some progress when counting kept objects
gc --auto: exclude base pack if not enough mem to "repack -ad"
gc: handle a corner case in gc.bigPackThreshold
gc: add gc.bigPackThreshold config
gc: add --keep-largest-pack option
repack: add --keep-pack option
t7700: have closing quote of a test at the beginning of line
By default we show porcelain, external commands and a couple others
that are also popular. If you are not happy with this list, you can
now customize it a new config variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After performing a merge that has conflicts git status will, by default,
attempt to detect renames which causes many objects to be examined. In a
virtualized repo, those objects do not exist locally so the rename logic
triggers them to be fetched from the server. This results in the status call
taking hours to complete on very large repos vs seconds with this patch.
Add a new config status.renames setting to enable turning off rename
detection during status and commit. This setting will default to the value
of diff.renames.
Add a new config status.renamelimit setting to to enable bounding the time
spent finding out inexact renames during status and commit. This setting
will default to the value of diff.renamelimit.
Add --no-renames command line option to status that enables overriding the
config setting from the command line. Add --find-renames[=<n>] command line
option to status that enables detecting renames and optionally setting the
similarity index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com>
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages from "git push" can be painted for more visibility.
* js/colored-push-errors:
config: document the settings to colorize push errors/hints
push: test to verify that push errors are colored
push: colorize errors
color: introduce support for colorizing stderr
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
Similar to the `preserve` mode simply passing the `--preserve-merges`
option to the `rebase` command, the `merges` mode simply passes the
`--rebase-merges` option.
This will allow users to conveniently rebase non-trivial commit
topologies when pulling new commits, without flattening them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a config option that allows selecting the default color scheme for
blame. The command line still takes precedence over the configuration.
It is to be seen, how color.ui will integrate with blame coloring.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Choose a different color for dates and imitate a 'temperature cool down'
depending upon age.
Originally I had planned to have the temperature cool down dependent on
the age of the project or file for example, as that might scale better,
but that can be added on top of this commit, e.g. instead of giving a
date, you could imagine giving a percentage that would be the linearly
interpolated between now and the beginning of the file.
Similarly to the previous patch, this offers the command line option
'--color-by-age' to enable this mode and the config option
'color.blame.highlightrecent' to select colors. A later patch will offer
a config option to select the default mode.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-blame lots of lines contain redundant information, for
example in hunks that consist of multiple lines, the metadata (commit
name, author, date) are repeated. A reader may not be interested in those,
so offer an option to color the information that is repeated from the
previous line differently. Traditionally, we use CYAN for lines that
are less interesting than others (e.g. hunk header), so go with that.
The command line option '--color-lines' will trigger the coloring of
repeated lines, and the config option 'color.blame.colorLines' is
provided to select the color. Setting the config option doesn't imply
that repeated lines are colored. A later patch will introduce a config
to enable this mode by default.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's make it easier for users to find out how to customize these colors.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This config allows us to keep <N> packs back if their size is larger
than a limit. But if this N >= gc.autoPackLimit, we may have a
problem. We are supposed to reduce the number of packs after a
threshold because it affects performance.
We could tell the user that they have incompatible gc.bigPackThreshold
and gc.autoPackLimit, but it's kinda hard when 'git gc --auto' runs in
background. Instead let's fall back to the next best stategy: try to
reduce the number of packs anyway, but keep the base pack out. This
reduces the number of packs to two and hopefully won't take up too
much resources to repack (the assumption still is the base pack takes
most resources to handle).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --keep-largest-pack option is not very convenient to use because
you need to tell gc to do this explicitly (and probably on just a few
large repos).
Add a config key that enables this mode when packs larger than a limit
are found. Note that there's a slight behavior difference compared to
--keep-largest-pack: all packs larger than the threshold are kept, not
just the largest one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only cache deltas when it's smaller than a certain limit. This limit
defaults to 1000 but save its compressed length in a 64-bit field.
Shrink that field down to 20 bits, so you can only cache 1MB deltas.
Larger deltas must be recomputed at when the pack is written down.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of struct packing from now on we can only handle max depth
4095 (or even lower when new booleans are added in this struct). This
should be ok since long delta chain will cause significant slow down
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
UTF supports lossless conversion round tripping and conversions between
UTF and other encodings are mostly round trip safe as Unicode aims to be
a superset of all other character encodings. However, certain encodings
(e.g. SHIFT-JIS) are known to have round trip issues [1].
Add 'core.checkRoundtripEncoding', which contains a comma separated
list of encodings, to define for what encodings Git should check the
conversion round trip if they are used in the 'working-tree-encoding'
attribute.
Set SHIFT-JIS as default value for 'core.checkRoundtripEncoding'.
[1] https://support.microsoft.com/en-us/help/170559/prb-conversion-problem-between-shift-jis-and-unicode
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit graph feature is controlled by the new core.commitGraph config
setting. This defaults to 0, so the feature is opt-in.
The intention of core.commitGraph is that a user can always stop checking
for or parsing commit graph files if core.commitGraph=0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack gained partial clone support (v2.17.0-rc0~132^2~12,
2017-12-08), it was guarded by the uploadpack.allowFilter config item
to allow server operators to control when they start supporting it.
That config item didn't go far enough, though: it controls whether the
'filter' capability is advertised, but if a (custom) client ignores
the capability advertisement and passes a filter specification anyway,
the server would handle that despite allowFilter being false.
This is particularly significant if a security bug is discovered in
this new experimental partial clone code. Installations without
uploadpack.allowFilter ought not to be affected since they don't
intend to support partial clone, but they would be swept up into being
vulnerable.
Simplify and limit the attack surface by making uploadpack.allowFilter
disable the feature, not just the advertisement of it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a tlsv1.3 option to http.sslVersion in addition to the existing
tlsv1.[012] options. libcurl has supported this since 7.52.0.
This requires OpenSSL 1.1.1 with TLS 1.3 enabled or curl built with
recent versions of NSS or BoringSSL as the TLS backend.
Signed-off-by: Loganaden Velvindron <logan@hackers.mu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify how configured fetch refspecs interact with the "--prune"
option of "git fetch", and also add a handy short-hand for getting
rid of stale tags that are locally held.
* ab/fetch-prune:
fetch: make the --prune-tags work with <url>
fetch: add a --prune-tags option and fetch.pruneTags config
fetch tests: add scaffolding for the new fetch.pruneTags
git-fetch & config doc: link to the new PRUNING section
git remote doc: correct dangerous lies about what prune does
git fetch doc: add a new section to explain the ins & outs of pruning
fetch tests: fetch <url> <spec> as well as fetch [<remote>]
fetch tests: expand case/esac for later change
fetch tests: double quote a variable for interpolation
fetch tests: test --prune and refspec interaction
fetch tests: add a tag to be deleted to the pruning tests
fetch tests: re-arrange arguments for future readability
fetch tests: refactor in preparation for testing tag pruning
remote: add a macro for "refs/tags/*:refs/tags/*"
fetch: stop accessing "remote" variable indirectly
fetch: trivially refactor assignment to ref_nr
fetch: don't redundantly NULL something calloc() gave us
Update the documentation for the 'submodule.recurse' config to identify
that the clone command does not respect it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the documentation for fetch.prune, fetch.<name>.prune and
--prune to link to the recently added PRUNING section.
I'd have liked to link directly to it with "<<PRUNING>>" from
fetch-options.txt, since it's included in git-fetch.txt (git-pull.txt
also includes it, but doesn't include that option). However making a
reference across files yields this error:
[...]/Documentation/git-fetch.xml:226: element xref: validity
error : IDREF attribute linkend references an unknown ID "PRUNING"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a configuration variable rebase.abbreviateCommands set,
"git rebase -i" produces the todo list with a single-letter
command names.
* lb/rebase-i-short-command-names:
sequencer.c: drop 'const' from function return type
t3404: add test case for abbreviated commands
rebase -i: learn to abbreviate command names
rebase -i -x: add exec commands via the rebase--helper
rebase -i: update functions to use a flags parameter
rebase -i: replace reference to sha1 with oid
rebase -i: refactor transform_todo_ids
rebase -i: set commit to null in exec commands
Documentation: use preferred name for the 'todo list' script
Documentation: move rebase.* configs to new file
Unrecognized escape sequences are invalid in values:
$ git config -f - --list <<EOF
[foo]
bar = "\t\\\y\"\u"
EOF
fatal: bad config line 2 in standard input
But in subsection names, the backslash is simply dropped if the
following character does not produce a recognized escape sequence:
$ git config -f - --list <<EOF
[foo "\t\\\y\"\u"]
bar = baz
EOF
foo.t\y"u.bar=baz
Although it would be nice for subsection names and values to have
consistent behavior, changing the behavior for subsection names is a
nonstarter since it would cause existing, valid config files to
suddenly be interpreted differently.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git shows a message to tell the user that it is waiting for the
user to finish editing when spawning an editor, in case the editor
opens to a hidden window or somewhere obscure and the user gets
lost.
* ls/editor-waiting-message:
launch_editor(): indicate that Git waits for user input
refactor "dumb" terminal determination
The way "git worktree add" determines what branch to create from
where and checkout in the new worktree has been updated a bit.
* tg/worktree-create-tracking:
add worktree.guessRemote config option
worktree: add --guess-remote flag to add subcommand
worktree: make add <path> <branch> dwim
worktree: add --[no-]track option to the add subcommand
worktree: add can be created from any commit-ish
checkout: factor out functions to new lib file
Remove any doubt that certificates might not be verified by
default.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach upload-pack to negotiate object filtering over the protocol and
to send filter parameters to pack-objects. This is intended for partial
clone and fetch.
The idea to make upload-pack configurable using uploadpack.allowFilter
comes from Jonathan Tan's work in [1].
[1] https://public-inbox.org/git/f211093280b422c32cc1b7034130072f35c5ed51.1506714999.git.jonathantanmy@google.com/
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a graphical GIT_EDITOR is spawned by a Git command that opens
and waits for user input (e.g. "git rebase -i"), then the editor window
might be obscured by other windows. The user might be left staring at
the original Git terminal window without even realizing that s/he needs
to interact with another window before Git can proceed. To this user Git
appears hanging.
Print a message that Git is waiting for editor input in the original
terminal and get rid of it when the editor returns, if the terminal
supports erasing the last line. Also, make sure that our message is
terminated with a whitespace so that any message the editor may show
upon starting up will be kept separate from our message.
Power users might not want to see this message or their editor might
already print such a message (e.g. emacsclient). Allow these users to
suppress the message by disabling the "advice.waitingForEditor" config.
The standard advise() function is not used here as it would always add
a newline which would make deleting the message harder.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh-variant 'simple' introduced earlier broke existing
installations by not passing --port/-4/-6 and not diagnosing an
attempt to pass these as an error. Instead, default to
automatically detect how compatible the GIT_SSH/GIT_SSH_COMMAND is
to OpenSSH convention and then error out an invocation to make it
easier to diagnose connection errors.
* jn/ssh-wrappers:
connect: correct style of C-style comment
ssh: 'simple' variant does not support --port
ssh: 'simple' variant does not support -4/-6
ssh: 'auto' variant to select between 'ssh' and 'simple'
connect: split ssh option computation to its own function
connect: split ssh command line options into separate function
connect: split git:// setup into a separate function
connect: move no_fork fallback to git_tcp_connect
ssh test: make copy_ssh_wrapper_as clean up after itself
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
Move all rebase.* configuration variables to a separate file in order to
remove duplicates, and include it in config.txt and git-rebase.txt. The
new descriptions are mostly taken from config.txt as they are more
verbose.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Android's "repo" tool is a tool for managing a large codebase
consisting of multiple smaller repositories, similar to Git's
submodule feature. Starting with Git 94b8ae5a (ssh: introduce a
'simple' ssh variant, 2017-10-16), users noticed that it stopped
handling the port in ssh:// URLs.
The cause: when it encounters ssh:// URLs, repo pre-connects to the
server and sets GIT_SSH to a helper ".repo/repo/git_ssh" that reuses
that connection. Before 94b8ae5a, the helper was assumed to support
OpenSSH options for lack of a better guess and got passed a -p option
to set the port. After that patch, it uses the new default of a
simple helper that does not accept an option to set the port.
The next release of "repo" will set GIT_SSH_VARIANT to "ssh" to avoid
that. But users of old versions and of other similar GIT_SSH
implementations would not get the benefit of that fix.
So update the default to use OpenSSH options again, with a twist. As
observed in 94b8ae5a, we cannot assume that $GIT_SSH always handles
OpenSSH options: common helpers such as travis-ci's dpl[*] are
configured using GIT_SSH and do not accept OpenSSH options. So make
the default a new variant "auto", with the following behavior:
1. First, check for a recognized basename, like today.
2. If the basename is not recognized, check whether $GIT_SSH supports
OpenSSH options by running
$GIT_SSH -G <options> <host>
This returns status 0 and prints configuration in OpenSSH if it
recognizes all <options> and returns status 255 if it encounters
an unrecognized option. A wrapper script like
exec ssh -- "$@"
would fail with
ssh: Could not resolve hostname -g: Name or service not known
, correctly reflecting that it does not support OpenSSH options.
The command is run with stdin, stdout, and stderr redirected to
/dev/null so even a command that expects a terminal would exit
immediately.
3. Based on the result from step (2), behave like "ssh" (if it
succeeded) or "simple" (if it failed).
This way, the default ssh variant for unrecognized commands can handle
both the repo and dpl cases as intended.
This autodetection has been running on Google workstations since
2017-10-23 with no reported negative effects.
[*] 6c3fddfda1/lib/dpl/provider.rb (L215)
Reported-by: William Yan <wyan@google.com>
Improved-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Description of blame.{showroot,blankboundary,showemail,date}
configuration variables have been added to "git config --help".
* sb/blame-config-doc:
config: document blame configuration
Description of blame.{showroot,blankboundary,showemail,date}
configuration variables have been added to "git config --help".
* sb/blame-config-doc:
config: document blame configuration
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
The options are currently only referenced by the git-blame man page,
also explain them in git-config, which is the canonical page to
contain all config options.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push options need to be given explicitly, via the command line as "git
push --push-option <option>". Add the config option push.pushOption,
which is a multi-valued option, containing push options that are sent
by default.
When push options are set in the lower-priority configulation file
(e.g. /etc/gitconfig, or $HOME/.gitconfig), they can be unset later in
the more specific repository config by the empty string.
Add tests and update documentation as well.
Signed-off-by: Marius Paliga <marius.paliga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
This reverts commit 6be4595edb.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
When using the 'ssh' transport, the '-o' option is used to specify an
environment variable which should be set on the remote end. This allows
git to send additional information when contacting the server,
requesting the use of a different protocol version via the
'GIT_PROTOCOL' environment variable like so: "-o SendEnv=GIT_PROTOCOL".
Unfortunately not all ssh variants support the sending of environment
variables to the remote end. To account for this, only use the '-o'
option for ssh variants which are OpenSSH compliant. This is done by
checking that the basename of the ssh command is 'ssh' or the ssh
variant is overridden to be 'ssh' (via the ssh.variant config).
Other options like '-p' and '-P', which are used to specify a specific
port to use, or '-4' and '-6', which are used to indicate that IPV4 or
IPV6 addresses should be used, may also not be supported by all ssh
variants.
Currently if an ssh command's basename wasn't 'plink' or
'tortoiseplink' git assumes that the command is an OpenSSH variant.
Since user configured ssh commands may not be OpenSSH compliant, tighten
this constraint and assume a variant of 'simple' if the basename of the
command doesn't match the variants known to git. The new ssh variant
'simple' will only have the host and command to execute ([username@]host
command) passed as parameters to the ssh command.
Update the Documentation to better reflect the command-line options sent
to ssh commands based on their variant.
Reported-by: Jeffrey Yasskin <jyasskin@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create protocol.{c,h} and provide functions which future servers and
clients can use to determine which protocol to use or is being used.
Also introduce the 'GIT_PROTOCOL' environment variable which will be
used to communicate a colon separated list of keys with optional values
to a server. Unknown keys and values must be tolerated. This mechanism
is used to communicate which version of the wire protocol a client would
like to use with a server.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes the core.fsmonitor setting, the fsmonitor integration hook,
and the fsmonitor index extension.
Also add documentation for the new fsmonitor options to ls-files and
update-index.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With more commands (that potentially change a submodule) paying attention
to submodules as well as the recent discussion[1] on
submodule.<name>.update, let's spell out that submodule.<name>.update
is strictly to be used for configuring the "submodule update" command
and not to be obeyed by other commands.
These other commands usually have a strict meaning of what they should
do (i.e. checkout, reset, rebase, merge) as well as have their name
overlapping with the modes possible for submodule.<name>.update.
[1] https://public-inbox.org/git/4283F0B0-BC1C-4ED1-8126-7E512D84484B@gmail.com/
submodule.<name>.update was set to "none", triggering unexpected
behavior as the submodule was thought to never be touched.
However a newer version of Git taught 'git pull --rebase' to also
populate and rebase submodules if they were active.
The newer options such as submodule.active and command specific
flags would not have triggered unexpected behavior.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to acquire a lock on a reference (e.g. while accepting a
push from a client) used to immediately fail when the reference is
already locked---now it waits for a very short while and retries,
which can make it succeed if the lock holder was holding it during
a read-only operation.
* mh/ref-lock-entry:
refs: retry acquiring reference locks for 100ms
"[gc] rerereResolved = 5.days" used to be invalid, as the variable
is defined to take an integer counting the number of days. It now
is allowed.
* jc/cutoff-config:
rerere: allow approxidate in gc.rerereResolved/gc.rerereUnresolved
rerere: represent time duration in timestamp_t internally
t4200: parameterize "rerere gc" custom expiry test
t4200: gather "rerere gc" together
t4200: make "rerere gc" test more robust
t4200: give us a clean slate after "rerere gc" tests
"git diff" has been taught to optionally paint new lines that are
the same as deleted lines elsewhere differently from genuinely new
lines.
* sb/diff-color-move: (25 commits)
diff: document the new --color-moved setting
diff.c: add dimming to moved line detection
diff.c: color moved lines differently, plain mode
diff.c: color moved lines differently
diff.c: buffer all output if asked to
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_STAT_SEP
diff.c: convert word diffing to use emit_diff_symbol
diff.c: convert show_stats to use emit_diff_symbol
diff.c: convert emit_binary_diff_body to use emit_diff_symbol
submodule.c: migrate diff output to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_REWRITE_DIFF
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_BINARY_FILES
diff.c: emit_diff_symbol learns DIFF_SYMBOL_HEADER
diff.c: emit_diff_symbol learns DIFF_SYMBOL_FILEPAIR_{PLUS, MINUS}
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_INCOMPLETE
diff.c: emit_diff_symbol learns DIFF_SYMBOL_WORDS[_PORCELAIN]
diff.c: migrate emit_line_checked to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_NO_LF_EOF
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_FRAGINFO
...
The philosophy of reference locking has been, "if another process is
changing a reference, then whatever I'm trying to do to it will
probably fail anyway because my old-SHA-1 value is probably no longer
current". But this argument falls down if the other process has locked
the reference to do something that doesn't actually change the value
of the reference, such as `pack-refs` or `reflog expire`. There
actually *is* a decent chance that a planned reference update will
still be able to go through after the other process has released the
lock.
So when trying to lock an individual reference (e.g., when creating
"refs/heads/master.lock"), if it is already locked, then retry the
lock acquisition for approximately 100 ms before giving up. This
should eliminate some unnecessary lock conflicts without wasting a lot
of time.
Add a configuration setting, `core.filesRefLockTimeout`, to allow this
setting to be tweaked.
Note: the function `get_files_ref_lock_timeout_ms()` cannot be private
to the files backend because it is also used by `write_pseudoref()`
and `delete_pseudoref()`, which are defined in `refs.c` so that they
can be used by other reference backends.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two configuration variables are described in the documentation
to take an expiry period expressed in the number of days:
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days.
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days.
There is no strong reason not to allow a more general "approxidate"
expiry specification, e.g. "5.days.ago", or "never".
Rename the config_get_expiry() helper introduced in the previous
step to git_config_get_expiry_in_days() and move it to a more
generic place, config.c, and use date.c::parse_expiry_date() to do
so. Give it an ability to allow the caller to tell among three
cases (i.e. there is no "gc.rerereResolved" config, there is and it
is correctly parsed into the *expiry variable, and there was an
error in parsing the given value). The current caller can work
correctly without using the return value, though.
In the future, we may find other variables that only allow an
integer that specifies "this many days" or other unit of time, and
when it happens we may need to drop "_days" suffix from the name of
the function and instead pass the "scale" value as another parameter.
But this will do for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying "the this" is an obvious typo. But while we're here,
let's polish the English on the second half of the sentence,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git config --bool xxx.yyy` returns `true` for `[xxx]yyy` but
`false` for `[xxx]yyy=` or `[xxx]yyy=""`. This is tested in
t1300-repo-config.sh since 09bc098c2.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learned to optionally give how many stash entries the
user has in its output.
* lb/status-stash-count:
glossary: define 'stash entry'
status: add optional stash count information
stash: update documentation to use 'stash entry'
Using "git add d/i/r" when d/i/r is the top of the working tree of
a separate repository would create a gitlink in the index, which
would appear as a not-quite-initialized submodule to others. We
learned to give warnings when this happens.
* jk/warn-add-gitlink:
t: move "git add submodule" into test blocks
add: warn when adding an embedded repository
We bumped the default in be4ca2905 (Increase
core.packedGitLimit, 2017-04-20) but never adjusted the
documentation to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce '--show-stash' and its configuration option 'status.showStash'
to allow git-status to show information about currently stashed entries.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time, a 'stash entry' is called a 'stash'. Lets try to make
this more consistent and use 'stash entry' instead.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an easy mistake to add a repository inside another
repository, like:
git clone $url
git add .
The resulting entry is a gitlink, but there's no matching
.gitmodules entry. Trying to use "submodule init" (or clone
with --recursive) doesn't do anything useful. Prior to
v2.13, such an entry caused git-submodule to barf entirely.
In v2.13, the entry is considered "inactive" and quietly
ignored. Either way, no clone of your repository can do
anything useful with the gitlink without the user manually
adding the submodule config.
In most cases, the user probably meant to either add a real
submodule, or they forgot to put the embedded repository in
their .gitignore file.
Let's issue a warning when we see this case. There are a few
things to note:
- the warning will go in the git-add porcelain; anybody
wanting to do low-level manipulation of the index is
welcome to create whatever funny states they want.
- we detect the case by looking for a newly added gitlink;
updates via "git add submodule" are perfectly reasonable,
and this avoids us having to investigate .gitmodules
entirely
- there's a command-line option to suppress the warning.
This is needed for git-submodule itself (which adds the
entry before adding any submodule config), but also
provides a mechanism for other scripts doing
submodule-like things.
We could make this a hard error instead of a warning.
However, we do add lots of sub-repos in our test suite. It's
not _wrong_ to do so. It just creates a state where users
may be surprised. Pointing them in the right direction with
a gentle hint is probably the best option.
There is a config knob that can disable the (long) hint. But
I intentionally omitted a config knob to disable the warning
entirely. Whether the warning is sensible or not is
generally about context, not about the user's preferences.
If there's a tool or workflow that adds gitlinks without
matching .gitmodules, it should probably be taught about the
new command-line option, rather than blanket-disabling the
warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands learned to pay attention to submodule.recurse
configuration.
* sb/submodule-blanket-recursive:
builtin/fetch.c: respect 'submodule.recurse' option
builtin/push.c: respect 'submodule.recurse' option
builtin/grep.c: respect 'submodule.recurse' option
Introduce 'submodule.recurse' option for worktree manipulators
submodule loading: separate code path for .gitmodules and config overlay
reset/checkout/read-tree: unify config callback for submodule recursion
submodule test invocation: only pass additional arguments
submodule recursing: do not write a config variable twice
The interaction of "url.*.insteadOf" and custom URL scheme's
whitelisting is now documented better.
* jk/url-insteadof-config:
docs/config: mention protocol implications of url.insteadOf
`git rev-parse --short` is not a generic modifier but just a variant
of `--verify` and considers the given length only as a suggestion to
ensure uniqueness.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any command that understands '--recurse-submodules' can have its
default changed to true, by setting the new 'submodule.recurse'
option.
This patch includes read-tree/checkout/reset for working tree
manipulating commands. Later patches will cover other commands.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a URL rewrite switches the protocol to something
nonstandard (like "persistent-https" for "https"), the user
may be bitten by the fact that the default protocol
restrictions are different between the two. Let's drop a
note in insteadOf that points the user in the right
direction.
It would be nice if we could make this work out of the box,
but we can't without knowing the security implications of
the user's rewrite. Only the documentation for a particular
remote helper can advise one way or the other. Since we do
include the persistent-https helper in contrib/ (and since
it was the helper in the real-world case that inspired that
patch), let's also drop a note there.
Suggested-by: Elliott Cable <me@ell.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced "[includeIf "gitdir:$dir"] path=..."
mechansim has further been taught to take symlinks into account.
The directory "$dir" specified in "gitdir:$dir" may be a symlink to
a real location, not something that $(getcwd) may return. In such
a case, a realpath of "$dir" is compared with the real path of the
current repository to determine if the contents from the named path
should be included.
* ab/conditional-config-with-symlinks:
config: match both symlink & realpath versions in IncludeIf.gitdir:*
Clarify documentation for include.path and includeIf.<condition>.path
configuration variables.
* jk/doc-config-include:
docs/config: consistify include.path examples
docs/config: avoid the term "expand" for includes
docs/config: give a relative includeIf example
docs/config: clarify include/includeIf relationship
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
The configuration variable log.showSignature is mentioned in git-log's
manpage. Document it in git-config's manpage as well.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the conditional inclusion mechanism to support
e.g. gitdir:~/git_tree/repo where ~/git_tree is a symlink to
/mnt/stuff/repo.
This worked in the initial version of this facility[1], but regressed
later in the series while solving a related bug[2].
Now gitdir: will match against the symlinked
path (e.g. gitdir:~/git_tree/repo) in addition to the current
/mnt/stuff/repo path.
Since this is already in a release version note in the documentation
that this behavior changed, so users who expect their configuration to
work on both v2.13.0 and some future version of git with this fix
aren't utterly confused.
1. commit 3efd0bedc6 ("config: add conditional include", 2017-03-01)
2. commit 86f9515708 ("config: resolve symlinks in conditional
include's patterns", 2017-04-05)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the include examples use "foo.inc", but some use
"foo". Since the string of examples are meant to show
variations and how they differ, it's a good idea to change
only one thing at a time. The filename differences are not
relevant to what we're trying to show.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the word "expand" to refer to including the contents
of another config file isn't really accurate, since it's a
verbatim insertion. And it can cause confusion with the
expanding of the path itself via things like "~".
Let's clarify when we are referring to the contents versus
the filename, and use appropriate verbs in each case.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes in the previous commit hopefully clarify that
the evaluation of an include "path" variable is the same no
matter if it's in a conditional section or not. But since
this question came up on the list, let's add an example that
makes it obvious.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "includeIf" directives behave exactly like include ones,
except they only kick in when the conditional is true. That
was mentioned in the "conditional" section, but let's make
it more clear for the whole "includes" section, since people
don't necessarily read the documentation top to bottom.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit c714e45 ("receive-pack: implement advertising and receiving
push options", 2016-07-14), receive-pack was taught to (among other
things) advertise that it understood push options, depending on
configuration. It was documented that it advertised such ability by
default; however, it actually does not. (In that commit, notice that
advertise_push_options defaults to 0, unlike advertise_atomic_push which
defaults to 1.)
Update the documentation to state that it does not advertise the ability
by default.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
Change the documentation for push.tracking=* to re-include a mention
of what "tracking" does.
The "tracking" option was renamed to "upstream" back in
53c4031 ("push.default: Rename 'tracking' to 'upstream'", 2011-02-16),
this section was then subsequently rewritten in 87a70e4 ("config doc:
rewrite push.default section", 2013-06-19) to remove any mention of
"tracking".
Maybe we should just warn or die nowadays if this option is in the
config, but I had some old config of mine use this option, I'd
forgotten that it was a synonym, and nothing in git's documentation
mentioned that.
That's bad, either we shouldn't support it at all, or we should
document what it does. This patch does the latter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the submodule.<name>.url config option is used to determine if
a given submodule is of interest to the user. This ends up being
cumbersome in a world where we want to have different submodules checked
out in different worktrees or a more generalized mechanism to select
which submodules are of interest.
In a future with worktree support for submodules, there will be multiple
working trees, each of which may only need a subset of the submodules
checked out. The URL (which is where the submodule repository can be
obtained) should not differ between different working trees.
It may also be convenient for users to more easily specify groups of
submodules they are interested in as opposed to running "git submodule
init <path>" on each submodule they want checked out in their working
tree.
To this end two config options are introduced, submodule.active and
submodule.<name>.active. The submodule.active config holds a pathspec
that specifies which submodules should exist in the working tree. The
submodule.<name>.active config is a boolean flag used to indicate if
that particular submodule should exist in the working tree.
Its important to note that submodule.active functions differently than
the other configuration options since it takes a pathspec. This allows
users to adopt at least two new workflows:
1. Submodules can be grouped with a leading directory, such that a
pathspec e.g. 'lib/' would cover all library-ish modules to allow
those who are interested in library-ish modules to set
"submodule.active = lib/" just once to say any and all modules in
'lib/' are interesting.
2. Once the pathspec-attribute feature is invented, users can label
submodules with attributes to group them, so that a broad pathspec
with attribute requirements, e.g. ':(attr:lib)', can be used to say
any and all modules with the 'lib' attribute are interesting.
Since the .gitattributes file, just like the .gitmodules file, is
tracked by the superproject, when a submodule moves in the
superproject tree, the project can adjust which path gets the
attribute in .gitattributes, just like it can adjust which path has
the submodule in .gitmodules.
Neither of these two additional configuration options solve the problem
of wanting different submodules checked out in different worktrees
because multiple worktrees share .git/config. Only once per-worktree
configurations become a reality can this be solved, but this is a
necessary preparatory step for that future.
Given these multiple ways to check if a submodule is of interest, the
more fine-grained submodule.<name>.active option has the highest order
of precedence followed by the pathspec check against submodule.active.
To ensure backwards compatibility, if neither of these options are set,
git falls back to checking the submodule.<name>.url option to determine
if a submodule is interesting.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrasing in this paragraph may give an impression that you can only
use it once. Rephrase it a bit.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linking the description for pathname quoting to the configuration
variable "core.quotePath" removes inconstistent and incomplete
sections while also giving two hints how to deal with it: Either with
"-c core.quotePath=false" or with "-z".
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* ps/urlmatch-wildcard:
urlmatch: allow globbing for the URL host part
urlmatch: include host in urlmatch ranking
urlmatch: split host and port fields in `struct url_info`
urlmatch: enable normalization of URLs with globs
mailmap: add Patrick Steinhardt's work address
Add missing `::` after the title.
Signed-off-by: David Pursehouse <dpursehouse@collab.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Commit 55cccf4bb (color_parse_mem: allow empty color spec,
2017-02-01) clearly defined the behavior of an empty color
config variable. Let's document that, and give a hint about
why it might be useful.
It's important not to say that it makes the item uncolored,
because it doesn't. It just sets no attributes, which means
that any previous attributes continue to take effect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prereleaseSuffix feature of version comparison that is used in
"git tag -l" did not correctly when two or more prereleases for the
same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2
are there and the code needs to compare 2.0-beta1 and 2.0-beta2).
* sg/fix-versioncmp-with-common-suffix:
versioncmp: generalize version sort suffix reordering
versioncmp: factor out helper for suffix matching
versioncmp: use earliest-longest contained suffix to determine sorting order
versioncmp: cope with common part overlapping with prerelease suffix
versioncmp: pass full tagnames to swap_prereleases()
t7004-tag: add version sort tests to show prerelease reordering issues
t7004-tag: use test_config helper
t7004-tag: delete unnecessary tags with test_when_finished
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
Update the error messages from the dumb-http client when it fails
to obtain loose objects; we used to give sensible error message
only upon 404 but we now forbid unexpected redirects that needs to
be reported with something sensible.
* jk/http-walker-limit-redirect:
http-walker: complain about non-404 loose object errors
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
The 'versionsort.prereleaseSuffix' configuration variable, as its name
suggests, is supposed to only deal with tagnames with prerelease
suffixes, and allows sorting those prerelease tags in a user-defined
order before the suffixless main release tag, instead of sorting them
simply lexicographically.
However, the previous changes in this series resulted in an
interesting and useful property of version sort:
- The empty string as a configured suffix matches all tagnames,
including tagnames without any suffix, but
- tagnames containing a "real" configured suffix are still ordered
according to that real suffix, because any longer suffix takes
precedence over the empty string.
Exploiting this property we can easily generalize suffix reordering
and specify the order of tags with given suffixes not only before but
even after a main release tag by using the empty suffix to denote the
position of the main release tag, without any algorithm changes:
$ git -c versionsort.prereleaseSuffix=-alpha \
-c versionsort.prereleaseSuffix=-beta \
-c versionsort.prereleaseSuffix="" \
-c versionsort.prereleaseSuffix=-gamma \
-c versionsort.prereleaseSuffix=-delta \
tag -l --sort=version:refname 'v3.0*'
v3.0-alpha1
v3.0-beta1
v3.0
v3.0-gamma1
v3.0-delta1
Since 'versionsort.prereleaseSuffix' is not a fitting name for a
configuration variable to control this more general suffix reordering,
introduce the new variable 'versionsort.suffix'. Still keep the old
configuration variable name as a deprecated alias, though, to avoid
suddenly breaking setups already using it. Ignore the old variable if
both old and new configuration variables are set, but emit a warning
so users will be aware of it and can fix their configuration. Extend
the documentation to describe and add a test to check this more
general behavior.
Note: since the empty suffix matches all tagnames, tagnames with
suffixes not included in the configuration are listed together with
the suffixless main release tag, ordered lexicographically right after
that, i.e. before tags with suffixes listed in the configuration
following the empty suffix.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
Finer-grained control of what protocols are allowed for transports
during clone/fetch/push have been enabled via a new configuration
mechanism.
* bw/transport-protocol-policy:
http: respect protocol.*.allow=user for http-alternates
transport: add from_user parameter to is_transport_allowed
http: create function to get curl allowed protocols
transport: add protocol policy config option
http: always warn if libcurl version is too old
lib-proto-disable: variable name fix
We somehow forgot to update the "default is 7" in the
documentation. Also give a way to explicitly ask the auto-scaling
by setting config.abbrev to "auto".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transport with dumb http can be fooled into following foreign URLs
that the end user does not intend to, especially with the server
side redirects and http-alternates mechanism, which can lead to
security issues. Tighten the redirection and make it more obvious
to the end user when it happens.
* jk/http-walker-limit-redirect-2.9:
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
Previously the `GIT_ALLOW_PROTOCOL` environment variable was used to
specify a whitelist of protocols to be used in clone/fetch/push
commands. This patch introduces new configuration options for more
fine-grained control for allowing/disallowing protocols. This also has
the added benefit of allowing easier construction of a protocol
whitelist on systems where setting an environment variable is
non-trivial.
Now users can specify a policy to be used for each type of protocol via
the 'protocol.<name>.allow' config option. A default policy for all
unconfigured protocols can be set with the 'protocol.allow' config
option. If no user configured default is made git will allow known-safe
protocols (http, https, git, ssh, file), disallow known-dangerous
protocols (ext), and have a default policy of `user` for all other
protocols.
The supported policies are `always`, `never`, and `user`. The `user`
policy can be used to configure a protocol to be usable when explicitly
used by a user, while disallowing it for commands which run
clone/fetch/push commands without direct user intervention (e.g.
recursive initialization of submodules). Commands which can potentially
clone/fetch/push from untrusted repositories without user intervention
can export `GIT_PROTOCOL_FROM_USER` with a value of '0' to prevent
protocols configured to the `user` policy from being used.
Fix remote-ext tests to use the new config to allow the ext
protocol to be tested.
Based on a patch by Jeff King <peff@peff.net>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing tagnames, it is possible that a tagname contains more
than one of the configured prerelease suffixes around the first
different character. After fixing a bug in the previous commit such a
tagname is sorted according to the contained suffix which comes first
in the configuration. This is, however, not quite the right thing to
do in the following corner cases:
1. $ git -c versionsort.suffix=-bar
-c versionsort.suffix=-foo-baz
-c versionsort.suffix=-foo-bar
tag -l --sort=version:refname 'v1*'
v1.0-foo-bar
v1.0-foo-baz
The suffix of the tagname 'v1.0-foo-bar' is clearly '-foo-bar',
so it should be listed last. However, as it also contains '-bar'
around the first different character, it is listed first instead,
because that '-bar' suffix comes first the configuration.
2. One of the configured suffixes starts with the other:
$ git -c versionsort.prereleasesuffix=-pre \
-c versionsort.prereleasesuffix=-prerelease \
tag -l --sort=version:refname 'v2*'
v2.0-prerelease1
v2.0-pre1
v2.0-pre2
Here the tagname 'v2.0-prerelease1' should be the last. When
comparing 'v2.0-pre1' and 'v2.0-prerelease1' the first different
characters are '1' and 'r', respectively. Since this first
different character must be part of the configured suffix, the
'-pre' suffix is not recognized in the first tagname. OTOH, the
'-prerelease' suffix is properly recognized in
'v2.0-prerelease1', thus it is listed first.
Improve version sort in these corner cases, and
- look for a configured prerelease suffix containing the first
different character or ending right before it, so the '-pre'
suffixes are recognized in case (2). This also means that
when comparing tagnames 'v2.0-pre1' and 'v2.0-pre2',
swap_prereleases() would find the '-pre' suffix in both, but then
it will return "undecided" and the caller will do the right thing
by sorting based in '1' and '2'.
- If the tagname contains more than one suffix, then give precedence
to the contained suffix that starts at the earliest offset in the
tagname to address (1).
- If there are more than one suffixes starting at that earliest
position, then give precedence to the longest of those suffixes,
thus ensuring that in (2) the tagname 'v2.0-prerelease1' won't be
sorted based on the '-pre' suffix.
Add tests for these corner cases and adjust the documentation
accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Version sort with prerelease reordering sometimes puts tagnames in the
wrong order, when the common part of two compared tagnames overlaps
with the leading character(s) of one or more configured prerelease
suffixes. Note the position of "v2.1.0-beta-1":
$ git -c versionsort.prereleaseSuffix=-beta \
tag -l --sort=version:refname v2.1.*
v2.1.0-beta-2
v2.1.0-beta-3
v2.1.0
v2.1.0-RC1
v2.1.0-RC2
v2.1.0-beta-1
v2.1.1
v2.1.2
The reason is that when comparing a pair of tagnames, first
versioncmp() looks for the first different character in a pair of
tagnames, and then the swap_prereleases() helper function looks for a
configured prerelease suffix _starting at_ that character. Thus, when
in the above example the sorting algorithm happens to compare the
tagnames "v2.1.0-beta-1" and "v2.1.0-RC2", swap_prereleases() tries to
match the suffix "-beta" against "beta-1" to no avail, and the two
tagnames erroneously end up being ordered lexicographically.
To fix this issue change swap_prereleases() to look for configured
prerelease suffixes _containing_ the position of that first different
character.
Care must be taken, when a configured suffix is longer than the
tagnames' common part up to the first different character, to avoid
reading memory before the beginning of the tagnames. Add a test that
uses an exceptionally long prerelease suffix to check for this, in the
hope that in case of a regression the illegal memory access causes a
segfault in 'git tag' on one of the commonly used platforms (the test
happens to pass successfully on my Linux system with the safety check
removed), or at least makes valgrind complain.
Under some circumstances it's possible that more than one prerelease
suffixes can be found in the same tagname around that first different
character. With this simple bugfix patch such a tagname is sorted
according to the contained suffix that comes first in the
configuration for now. This is less than ideal in some cases, and the
following patch will take care of those.
Reported-by: Leho Kraav <leho@conversionready.com>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We instruct curl to always follow HTTP redirects. This is
convenient, but it creates opportunities for malicious
servers to create confusing situations. For instance,
imagine Alice is a git user with access to a private
repository on Bob's server. Mallory runs her own server and
wants to access objects from Bob's repository.
Mallory may try a few tricks that involve asking Alice to
clone from her, build on top, and then push the result:
1. Mallory may simply redirect all fetch requests to Bob's
server. Git will transparently follow those redirects
and fetch Bob's history, which Alice may believe she
got from Mallory. The subsequent push seems like it is
just feeding Mallory back her own objects, but is
actually leaking Bob's objects. There is nothing in
git's output to indicate that Bob's repository was
involved at all.
The downside (for Mallory) of this attack is that Alice
will have received Bob's entire repository, and is
likely to notice that when building on top of it.
2. If Mallory happens to know the sha1 of some object X in
Bob's repository, she can instead build her own history
that references that object. She then runs a dumb http
server, and Alice's client will fetch each object
individually. When it asks for X, Mallory redirects her
to Bob's server. The end result is that Alice obtains
objects from Bob, but they may be buried deep in
history. Alice is less likely to notice.
Both of these attacks are fairly hard to pull off. There's a
social component in getting Mallory to convince Alice to
work with her. Alice may be prompted for credentials in
accessing Bob's repository (but not always, if she is using
a credential helper that caches). Attack (1) requires a
certain amount of obliviousness on Alice's part while making
a new commit. Attack (2) requires that Mallory knows a sha1
in Bob's repository, that Bob's server supports dumb http,
and that the object in question is loose on Bob's server.
But we can probably make things a bit more obvious without
any loss of functionality. This patch does two things to
that end.
First, when we encounter a whole-repo redirect during the
initial ref discovery, we now inform the user on stderr,
making attack (1) much more obvious.
Second, the decision to follow redirects is now
configurable. The truly paranoid can set the new
http.followRedirects to false to avoid any redirection
entirely. But for a more practical default, we will disallow
redirects only after the initial ref discovery. This is
enough to thwart attacks similar to (2), while still
allowing the common use of redirects at the repository
level. Since c93c92f30 (http: update base URLs when we see
redirects, 2013-09-28) we re-root all further requests from
the redirect destination, which should generally mean that
no further redirection is necessary.
As an escape hatch, in case there really is a server that
needs to redirect individual requests, the user can set
http.followRedirects to "true" (and this can be done on a
per-server basis via http.*.followRedirects config).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a little silly to do a reachabilty check in the case where we
trust the user to access absolutely everything in the repository.
Also, it's racy in a distributed system -- perhaps one server
advertises a ref, but another has since had a force-push to that ref,
and perhaps the two HTTP requests end up directed to these different
servers.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, "git gc" may delete objects that another concurrent process
is using but hasn't created a reference to. Git has some mitigations,
but they fall short of a complete solution. Document this in the
git-gc(1) man page and add a reference from the documentation of the
gc.pruneExpire config variable.
Based on a write-up by Jeff King:
http://marc.info/?l=git&m=147922960131779&w=2
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "SECURITY" section of the gitnamespaces(7) man page described two
ways for a client to steal data from a server that wasn't intended to be
shared. Similar attacks can be performed by a server on a client, so
adapt the section to cover both directions and add it to the
git-fetch(1), git-pull(1), and git-push(1) man pages. Also add
references to this section from the documentation of server
configuration options that attempt to control data leakage but may not
be fully effective.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase.instructionFormat option is missing its "::" to
tell AsciiDoc that it's a list entry. As a result, the
option name gets lumped into the description in one big
paragraph.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "submodule.<name>.path" stored in .gitmodules is never copied
to .git/config and such a key in .git/config has no meaning, but
the documentation described it and submodule.<name>.url next to
each other as if both belong to .git/config. This has been fixed.
* sb/submodule-config-doc-drop-path:
documentation: improve submodule.<name>.{url, path} description
The "submodule.<name>.path" stored in .gitmodules is never copied
to .git/config and such a key in .git/config has no meaning, but
the documentation described it and submodule.<name>.url next to
each other as if both belong to .git/config. This has been fixed.
* sb/submodule-config-doc-drop-path:
documentation: improve submodule.<name>.{url, path} description
Unlike the url variable a user cannot override the the path variable,
as it is part of the content together with the gitlink at the given
path. To avoid confusion do not mention the .path variable in the config
section and rely on the documentation provided in gitmodules[5].
Enhance the description of submodule.<name>.url and mention its two use
cases separately.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In recent versions of cURL, GSSAPI credential delegation is
disabled by default due to CVE-2011-2192; introduce a configuration
to selectively allow enabling this.
* ps/http-gssapi-cred-delegation:
http: control GSSAPI credential delegation
Delegation of credentials is disabled by default in libcurl since
version 7.21.7 due to security vulnerability CVE-2011-2192. Which
makes troubles with GSS/kerberos authentication when delegation
of credentials is required. This can be changed with option
CURLOPT_GSSAPI_DELEGATION in libcurl with set expected parameter
since libcurl version 7.22.0.
This patch provides new configuration variable http.delegation
which corresponds to curl parameter "--delegation" (see man 1 curl).
The following values are supported:
* none (default).
* policy
* always
Signed-off-by: Petr Stodulka <pstodulk@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
Since 4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--recursive` and `--reference` is given, it is reasonable to
expect that the submodules are created with references to the submodules
of the given alternate for the superproject.
An initial attempt to do this was presented to the mailing list, which
used flags that are passed around ("--super-reference") that instructed
the submodule clone to look for a reference in the submodules of the
referenced superproject. This is not well thought out, as any further
`submodule update` should also respect the initial setup.
When a new submodule is added to the superproject and the alternate
of the superproject does not know about that submodule yet, we rather
error out informing the user instead of being unclear if we did or did
not use a submodules alternate.
To solve this problem introduce new options that store the configuration
for what the user wanted originally.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit message is long and has lots of background and
numbers. The summary is: the current default of 250 doesn't
save much space, and costs CPU. It's not a good tradeoff.
Read on for details.
The "--aggressive" flag to git-gc does three things:
1. use "-f" to throw out existing deltas and recompute from
scratch
2. use "--window=250" to look harder for deltas
3. use "--depth=250" to make longer delta chains
Items (1) and (2) are good matches for an "aggressive"
repack. They ask the repack to do more computation work in
the hopes of getting a better pack. You pay the costs during
the repack, and other operations see only the benefit.
Item (3) is not so clear. Allowing longer chains means fewer
restrictions on the deltas, which means potentially finding
better ones and saving some space. But it also means that
operations which access the deltas have to follow longer
chains, which affects their performance. So it's a tradeoff,
and it's not clear that the tradeoff is even a good one.
The existing "250" numbers for "--aggressive" come
originally from this thread:
http://public-inbox.org/git/alpine.LFD.0.9999.0712060803430.13796@woody.linux-foundation.org/
where Linus says:
So when I said "--depth=250 --window=250", I chose those
numbers more as an example of extremely aggressive
packing, and I'm not at all sure that the end result is
necessarily wonderfully usable. It's going to save disk
space (and network bandwidth - the delta's will be re-used
for the network protocol too!), but there are definitely
downsides too, and using long delta chains may
simply not be worth it in practice.
There are some numbers in that thread, but they're mostly
focused on the improved window size, and measure the
improvement from --depth=250 and --window=250 together.
E.g.:
http://public-inbox.org/git/9e4733910712062006l651571f3w7f76ce64c6650dff@mail.gmail.com/
talks about the improved run-time of "git-blame", which
comes from the reduced pack size. But most of that reduction
is coming from --window=250, whereas most of the extra costs
come from --depth=250. There's a link in that thread showing
that increasing the depth beyond 50 doesn't seem to help
much with the size:
https://vcscompare.blogspot.com/2008/06/git-repack-parameters.html
but again, no discussion of the timing impact.
In an earlier thread from Ted Ts'o which discussed setting
the non-aggressive default (from 10 to 50):
http://public-inbox.org/git/20070509134958.GA21489%40thunk.org/
we have more numbers, with the conclusion that going past 50
does not help size much, and hurts the speed of normal
operations.
So from that, we might guess that 50 is actually a sweet
spot, even for aggressive, if we interpret aggressive to
"spend time now to make a better pack". It is not clear that
"--depth=250" is actually a better pack. It may be slightly
_smaller_, but it carries a run-time penalty.
Here are some more recent timings I did to verify that. They
show three things:
- the size of the resulting pack (so disk saved to store,
bandwidth saved on clones/fetches)
- the cost of "rev-list --objects --all", which shows the
effect of the delta chains on trees (commits typically
don't delta, and the command doesn't touch the blobs at
all)
- the cost of "log -Sfoo", which will additionally access
each blob
All cases were repacked with "git repack -adf --depth=$d
--window=250" (so basically, what would happen if we tweaked
the "gc --aggressive" default depth).
The timings are all wall-clock best-of-3. The machine itself
has plenty of RAM compared to the repositories (which is
probably typical of most workstations these days), so we're
really measuring CPU usage, as the whole thing will be in
disk cache after the first run.
The core.deltaBaseCacheLimit is at its default of 96MiB.
It's possible that tweaking it would have some impact on the
tests, as some of them (especially "log -S" on a large repo)
are likely to overflow that. But bumping that carries a
run-time memory cost, so for these tests, I focused on what
we could do just with the on-disk pack tradeoffs.
Each test is done for four depths: 250 (the current value),
50 (the current default that tested well previously), 100
(to show something on the larger side, which previous tests
showed was not a good tradeoff), and 10 (the very old
default, which previous tests showed was worse than 50).
Here are the numbers for linux.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 967MB | n/a | 48.159s | n/a | 378.088 | n/a
100 | 971MB | +0.4% | 41.471s | -13.9% | 342.060 | -9.5%
50 | 979MB | +1.2% | 37.778s | -21.6% | 311.040s | -17.7%
10 | 1.1GB | +6.6% | 32.518s | -32.5% | 279.890s | -25.9%
and for git.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 48MB | n/a | 2.215s | n/a | 20.922s | n/a
100 | 49MB | +0.5% | 2.140s | -3.4% | 17.736s | -15.2%
50 | 49MB | +1.7% | 2.099s | -5.2% | 15.418s | -26.3%
10 | 53MB | +9.3% | 2.001s | -9.7% | 12.677s | -39.4%
You can see that that the CPU savings for regular operations improves as we
decrease the depth. The savings are less for "rev-list" on a smaller repository
than they are for blob-accessing operations, or even rev-list on a larger
repository. This may mean that a larger delta cache would help (though setting
core.deltaBaseCacheLimit by itself doesn't).
But we can also see that the space savings are not that great as the depth goes
higher. Saving 5-10% between 10 and 50 is probably worth the CPU tradeoff.
Saving 1% to go from 50 to 100, or another 0.5% to go from 100 to 250 is
probably not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
After a client has sent us the complete pack, we may spend
some time processing the data and running hooks. If the
client asked us to be quiet, receive-pack won't send any
progress data during the index-pack or connectivity-check
steps. And hooks may or may not produce their own progress
output. In these cases, the network connection is totally
silent from both ends.
Git itself doesn't care about this (it will wait forever),
but other parts of the system (e.g., firewalls,
load-balancers, etc) might hang up the connection. So we'd
like to send some sort of keepalive to let the network and
the client side know that we're still alive and processing.
We can use the same trick we did in 05e9515 (upload-pack:
send keepalive packets during pack computation, 2013-09-08).
Namely, we will send an empty sideband data packet every `N`
seconds that we do not relay any stderr data over the
sideband channel. As with 05e9515, this means that we won't
bother sending keepalives when there's actual progress data,
but will kick in when it has been disabled (or if there is a
lull in the progress data).
The concept is simple, but the details are subtle enough
that they need discussing here.
Before the client sends us the pack, we don't want to do any
keepalives. We'll have sent our ref advertisement, and we're
waiting for them to send us the pack (and tell us that they
support sidebands at all).
While we're receiving the pack from the client (or waiting
for it to start), there's no need for keepalives; it's up to
them to keep the connection active by sending data.
Moreover, it would be wrong for us to do so. When we are the
server in the smart-http protocol, we must treat our
connection as half-duplex. So any keepalives we send while
receiving the pack would potentially be buffered by the
webserver. Not only does this make them useless (since they
would not be delivered in a timely manner), but it could
actually cause a deadlock if we fill up the buffer with
keepalives. (It wouldn't be wrong to send keepalives in this
phase for a full-duplex connection like ssh; it's simply
pointless, as it is the client's responsibility to speak).
As soon as we've gotten all of the pack data, then the
client is waiting for us to speak, and we should start
keepalives immediately. From here until the end of the
connection, we send one any time we are not otherwise
sending data.
But there's a catch. Receive-pack doesn't know the moment
we've gotten all the data. It passes the descriptor to
index-pack, who reads all of the data, and then starts
resolving the deltas. We have to communicate that back.
To make this work, we instruct the sideband muxer to enable
keepalives in three phases:
1. In the beginning, not at all.
2. While reading from index-pack, wait for a signal
indicating end-of-input, and then start them.
3. Afterwards, always.
The signal from index-pack in phase 2 has to come over the
stderr channel which the muxer is reading. We can't use an
extra pipe because the portable run-command interface only
gives us stderr and stdout.
Stdout is already used to pass the .keep filename back to
receive-pack. We could also send a signal there, but then we
would find out about it in the main thread. And the
keepalive needs to be done by the async muxer thread (since
it's the one writing sideband data back to the client). And
we can't reliably signal the async thread from the main
thread, because the async code sometimes uses threads and
sometimes uses forked processes.
Therefore the signal must come over the stderr channel,
where it may be interspersed with other random
human-readable messages from index-pack. This patch makes
the signal a single NUL byte. This is easy to parse, should
not appear in any normal stderr output, and we don't have to
worry about any timing issues (like seeing half the signal
bytes in one read(), and half in a subsequent one).
This is a bit ugly, but it's simple to code and should work
reliably.
Another option would be to stop using an async thread for
muxing entirely, and just poll() both stderr and stdout of
index-pack from the main thread. This would work for
index-pack (because we aren't doing anything useful in the
main thread while it runs anyway). But it would make the
connectivity check and the hook muxers much more
complicated, as they need to simultaneously feed the
sub-programs while reading their stderr.
The index-pack phase is the only one that needs this
signaling, so it could simply behave differently than the
other two. That would mean having two separate
implementations of copy_to_sideband (and the keepalive
code), though. And it still doesn't get rid of the
signaling; it just means we can write a nicer message like
"END_OF_INPUT" or something on stdout, since we don't have
to worry about separating it from the stderr cruft.
One final note: this signaling trick is only done with
index-pack, not with unpack-objects. There's no point in
doing it for the latter, because by definition it only kicks
in for a small number of objects, where keepalives are not
as useful (and this conveniently lets us avoid duplicating
the implementation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
A new configuration variable core.sshCommand has been added to
specify what value for GIT_SSH_COMMAND to use per repository.
* nd/connect-ssh-command-config:
connect: read $GIT_SSH_COMMAND from config file
The pre/post receive hook may be interested in more information from the
user. This information can be transmitted when both client and server
support the "push-options" capability, which when used is a phase directly
after update commands ended by a flush pkt.
Similar to the atomic option, the server capability can be disabled via
the `receive.advertisePushOptions` config variable. While documenting
this, fix a nit in the `receive.advertiseAtomic` wording.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
The output coloring scheme learned two new attributes, italic and
strike, in addition to existing bold, reverse, etc.
* jk/ansi-color:
color: support strike-through attribute
color: support "italic" attribute
color: allow "no-" for negating attributes
color: refactor parse_attr
add skip_prefix_mem helper
doc: refactor description of color format
color: fix max-size comment
Similar to $GIT_ASKPASS or $GIT_PROXY_COMMAND, we also read from
config file first then fall back to $GIT_SSH_COMMAND.
This is useful for selecting different private keys targetting the
same host (e.g. github)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"upload-pack" allows a custom "git pack-objects" replacement when
responding to "fetch/clone" via the uploadpack.packObjectsHook.
* jk/upload-pack-hook:
upload-pack: provide a hook for running pack-objects
t1308: do not get fooled by symbolic links to the source tree
config: add a notion of "scope"
config: return configset value for current_config_ functions
config: set up config_source for command-line config
git_config_parse_parameter: refactor cleanup code
git_config_with_options: drop "found" counting
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
Before this change,
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
would have the same effect as
$ echo "* text" >.gitattributes
$ git config core.eol crlf
Since the 'eol' attribute had higher priority than 'text=auto', this may
corrupt binary files and is not what most users expect to happen.
Make the 'eol' attribute to obey 'text=auto' and now
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
behaves the same as
$ echo "* text=auto" >.gitattributes
$ git config core.eol crlf
In other words,
$ echo "* text=auto eol=crlf" >.gitattributes
has the same effect as
$ git config core.autocrlf true
and
$ echo "* text=auto eol=lf" >.gitattributes
has the same effect as
$ git config core.autocrlf input
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "remote -> local" line, if either ref is a substring of the
other, the common part in the other string is replaced with "*". For
example
abc -> origin/abc
refs/pull/123/head -> pull/123
become
abc -> origin/*
refs/*/head -> pull/123
Activated with fetch.output=compact.
For the record, this output is not perfect. A single giant ref can
push all refs very far to the right and likely be wrapped around. We
may have a few options:
- exclude these long lines smarter
- break the line after "->", exclude it from column width calculation
- implement a new format, { -> origin/}foo, which makes the problem
go away at the cost of a bit harder to read
- reverse all the arrows so we have "* <- looong-ref", again still
hard to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
This is the only remaining attribute that is commonly
supported (at least by xterm) that we don't support. Let's
add it for completeness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support bold, underline, and similar attributes.
Let's add italic to the mix. According to the Wikipedia
page on ANSI colors, this attribute is "not widely
supported", but it does seem to work on my xterm.
We don't have to bump the maximum color size because we were
already over-allocating it (but we do adjust the comment
appropriately).
Requested-by: Simon Courtois <scourtois@cubyx.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "no-bold" rather than "nobold" is easier to read and
more natural to type (to me, anyway, even though I was the
person who introduced "nobold" in the first place). It's
easy to allow both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a general cleanup of the description of colors in
git-config, mostly to address inaccuracies and confusion
that had grown over time:
- you can have many attributes, not just one
- the discussion flip-flopped between colors and
attributes; now we discuss everything about colors, then
everything about attributes
- many concepts were lumped into the first paragraph,
making it hard to read, and especially to find the
actual lists of colors and attributes. I stopped short
of breaking those out into their own lists, as it seemed
like an excessive use of vertical screen real estate.
- we introduced negated attributes, but then the next
paragraph basically explains how each item starts off
with no attributes. So why would one need negated
attributes? We now explain.
- minor typo, language, and typography fixes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
When upload-pack serves a client request, it turns to
pack-objects to do the heavy lifting of creating a
packfile. There's no easy way to intercept the call to
pack-objects, but there are a few good reasons to want to do
so:
1. If you're debugging a client or server issue with
fetching, you may want to store a copy of the generated
packfile.
2. If you're gathering data from real-world fetches for
performance analysis or debugging, storing a copy of
the arguments and stdin lets you replay the pack
generation at your leisure.
3. You may want to insert a caching layer around
pack-objects; it is the most CPU- and memory-intensive
part of serving a fetch, and its output is a pure
function[1] of its input, making it an ideal place to
consolidate identical requests.
This patch adds a simple "hook" interface to intercept calls
to pack-objects. The new test demonstrates how it can be
used for debugging (using it for caching is a
straightforward extension; the tricky part is writing the
actual caching layer).
This hook is unlike the normal hook scripts found in the
"hooks/" directory of a repository. Because we promise that
upload-pack is safe to run in an untrusted repository, we
cannot execute arbitrary code or commands found in the
repository (neither in hooks/, nor in the config). So
instead, this hook is triggered from a config variable that
is explicitly ignored in the per-repo config.
The config variable holds the actual shell command to run as
the hook. Another approach would be to simply treat it as a
boolean: "should I respect the upload-pack hooks in this
repo?", and then run the script from "hooks/" as we usually
do. However, that isn't as flexible; there's no way to run a
hook approved by the site administrator (e.g., in
"/etc/gitconfig") on a repository whose contents are not
trusted. The approach taken by this patch is more
fine-grained, if a little less conventional for git hooks
(it does behave similar to other configured commands like
diff.external, etc).
[1] Pack-objects isn't _actually_ a pure function. Its
output depends on the exact packing of the object
database, and if multi-threading is used for delta
compression, can even differ racily. But for the
purposes of caching, that's OK; of the many possible
outputs for a given input, it is sufficient only that we
output one of them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
We forgot to add "git log --decorate=auto" to documentation when we
added the feature back in v2.1.0 timeframe.
* rj/log-decorate-auto:
log: document the --decorate=auto option
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
"git commit" learned to pay attention to "commit.verbose"
configuration variable and act as if "--verbose" option was
given from the command line.
* pb/commit-verbose-config:
commit: add a commit.verbose config variable
t7507-commit-verbose: improve test coverage by testing number of diffs
parse-options.c: make OPTION_COUNTUP respect "unspecified" values
t/t7507: improve test coverage
t0040-parse-options: improve test coverage
test-parse-options: print quiet as integer
t0040-test-parse-options.sh: fix style issues
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Consolidate description of tilde-expansion that is done to
configuration variables that take pathname to a single place.
* jc/config-pathname-type:
config: describe 'pathname' value type
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit.verbose configuration variable as a convenience for those
who always prefer --verbose.
Add tests to check the behavior introduced by this commit and also to
verify that behavior of status doesn't break because of this commit.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a handful of incorrect "linkgit:<page>[<section>]"
instances in our documentation set.
* Some have an extra colon after "linkgit:"; fix them by removing
the extra colon;
* Some refer to a page outside the Git suite, namely curl(1); fix
them by using the `curl(1)` that already appears on the same page
for the same purpose of referring the readers to its manual page.
* Some spell the name of the page incorrectly, e.g. "rev-list" when
they mean "git-rev-list"; fix them.
* Some list the manual section incorrectly; fix them to make sure
they match what is at the top of the target of the link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP transport clients learned to throw extra HTTP headers at the
server, specified via http.extraHeader configuration variable.
* js/http-custom-headers:
http: support sending custom HTTP headers
We don't consistently use `backticks` for formatting shell variables.
This patch improves the consistency on shell variables (and a few nearby
mentions of "gpg" commands), though it still doesn't straighten out the
use of "quotes."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should handle .gitconfig files that specify things like:
[http]
cookieFile = "~/.gitcookies"
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a dedicated section for various value-types used in the
configuration variables already, because we needed to describe how
booleans and scaled integers can be spelled, and the pathname type
would fit there.
Adjust the description of `include.path`, `core.excludesFile` and
`commit.template` variables slightly to clarify that these variables
are of this type.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
