In "common" man pages there is luckily no "NAME" anywhere except at
beginning of documents. If there is another "NAME", sed could
mis-select it and lead to common-cmds.h corruption. So better nail it
at beginning of line, which would reduce corruption chance.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list extra_refs contains tags and the objects referenced by them,
so that they can be handled at the end. When a tag references a
commit, that commit is added to the list using the same name.
Also, the function handle_tags_and_duplicates() relies on the order
the items were added to extra_refs, so clearly we do not want to
use a sorted list here.
Noticed by Miklos Vajna.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string of 'git request-pull' differs from he manpage
which gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally --with-tree=<tree> was designed for the sole purpose of
checking if a given pathspec makes sense as a parameter to git-commit
using it in conjunction with --error-unmatch. It had logic to avoid
showing the same entry (one came from the original index, another from the
overlayed tree) twice so that it works with -c (i.e. "show-cached"), but
otherwise it was not designed to work with the flags such as -m, -d, etc.
This teaches the same logic to cover the codepath for -m and -d.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The date/time parsing code was confused if the input time HH:MM:SS is
followed by fractional seconds. Since we do not record anything finer
grained than seconds, we could just drop fractional part, but there is a
twist.
We have taught people that not just spaces but dot can be used as word
separators when spelling things like:
$ git log --since 2.days
$ git show @{12:34:56.7.days.ago}
and we shouldn't mistake "7" in the latter example as a fraction and
discard it.
The rules are:
- valid days of month/mday are always single or double digits.
- valid years are either two or four digits
No, we don't support the year 600 _anyway_, since our encoding is based
on the UNIX epoch, and the day we worry about the year 10,000 is far
away and we can raise the limit to five digits when we get closer.
- Other numbers (eg "600 days ago") can have any number of digits, but
they cannot start with a zero. Again, the only exception is for
two-digit numbers, since that is fairly common for dates ("Dec 01" is
not unheard of)
So that means that any milli- or micro-second would be thrown out just
because the number of digits shows that it cannot be an interesting date.
A milli- or micro-second can obviously be a perfectly fine number
according to the rules above, as long as it doesn't start with a '0'. So
if we have
12:34:56.123
then that '123' gets parsed as a number, and we remember it. But because
it's bigger than 31, we'll never use it as such _unless_ there is
something after it to trigger that use.
So you can say "12:34:56.123.days.ago", and because of the "days", that
123 will actually be meaninful now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier commit 5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit 5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The period at the end of the git-check-attr summary causes there to be
two periods after the summary in the git(1) manual page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before cf818348f1),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix 'git submodule update' to avoid printing a spurious "Maybe you want
to use 'update --init'?" once for every uninitialized submodule it
encounters.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string of 'git ls-remote' is pretty terse. The manpage
however gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The target to run self test is 'make test', but there are people who try
'make check' and worse yet do not have sparse installed.
Suggest 'make test' target when they do not have 'sparse'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver has been moved from libexecdir to bindir.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Use git_pathdup instead of xstrdup(git_path(...))
git_pathdup: returns xstrdup-ed copy of the formatted path
Fix potentially dangerous use of git_path in ref.c
Add git_snpath: a .git path formatting routine with output buffer
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Conflicts:
builtin-revert.c
rerere.c
* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
git push normally updates local refs only after a successful push. If the
remote already has the updates -- pushed indirectly through another repository,
for example -- we forget to update local tracking refs.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We force writing a ref if it does not exist. Originally, we only had to look
for the ref file to check if it existed. Now we have to look for a packed ref
as well. Luckily, resolve_ref already does all the work for us.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git tag -d -l -v ..." is called, only "-l" is honored, which is
arbitrary and wrong. Also, unrecognized options are accepted in the
wrong modes, causing for example "git tag -n 100" to create a tag
named "100" while the user may have wanted to type "git tag -n100".
This patch checks that "git tag" knows in what mode it operates before
performing any operation and accepts only the related options.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even long timers seem to have missed that "format-patch -1 $commit" is a
much simpler and more obvious way to say "format-patch $commit^..$commit"
from the current documentation (and an example "format-patch -3 $commit"
to get three patches). Add an explicit instruction in a much earlier part
of the documentation to make it easier to find.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
