"GIT_EDITOR=: git branch --edit-description" resulted in failure,
which has been corrected.
* jc/branch-description-unset:
branch: do not fail a no-op --edit-desc
Code clean-up.
* jk/cleanup-callback-parameters:
attr: drop DEBUG_ATTR code
commit: avoid writing to global in option callback
multi-pack-index: avoid writing to global in option callback
test-submodule: inline resolve_relative_url() function
By default, use of fsmonitor on a repository on networked
filesystem is disabled. Add knobs to make it workable on macOS.
* ed/fsmonitor-on-networked-macos:
fsmonitor: fix leak of warning message
fsmonitor: add documentation for allowRemote and socketDir options
fsmonitor: check for compatability before communicating with fsmonitor
fsmonitor: deal with synthetic firmlinks on macOS
fsmonitor: avoid socket location check if using hook
fsmonitor: relocate socket file if .git directory is remote
fsmonitor: refactor filesystem checks to common interface
The codepath to sign learned to report errors when it fails to read
from "ssh-keygen".
* pw/ssh-sign-report-errors:
ssh signing: return an error when signature cannot be read
Fix a logic in "mailinfo -b" that miscomputed the length of a
substring, which lead to an out-of-bounds access.
* pw/mailinfo-b-fix:
mailinfo -b: fix an out of bounds access
Force C locale while running tests around httpd to make sure we can
find expected error messages in the log.
* rs/test-httpd-in-C-locale:
t/lib-httpd: pass LANG and LC_ALL to Apache
The fsm_settings__get_incompatible_msg() function returns an allocated
string. So we can't pass its result directly to warning(); we must hold
on to the pointer and free it to avoid a leak.
The leak here is small and fixed size, but Coverity complained, and
presumably SANITIZE=leaks would eventually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In read-only repositories, "git merge-tree" tried to come up with a
merge result tree object, which it failed (which is not wrong) and
led to a segfault (which is bad), which has been corrected.
* js/merge-ort-in-read-only-repo:
merge-ort: return early when failing to write a blob
merge-ort: fix segmentation fault in read-only repositories
"git multi-pack-index repack/expire" used to repack unreachable
cruft into a new pack, which have been corrected.
* tb/midx-repack-ignore-cruft-packs:
midx.c: avoid cruft packs with non-zero `repack --batch-size`
midx.c: remove unnecessary loop condition
midx.c: replace `xcalloc()` with `CALLOC_ARRAY()`
midx.c: avoid cruft packs with `repack --batch-size=0`
midx.c: prevent `expire` from removing the cruft pack
Documentation/git-multi-pack-index.txt: clarify expire behavior
Documentation/git-multi-pack-index.txt: fix typo
"git rebase -i" can mistakenly attempt to apply a fixup to a commit
itself, which has been corrected.
* ja/rebase-i-avoid-amending-self:
sequencer: avoid dropping fixup commit that targets self via commit-ish
Documentation on various Boolean GIT_* environment variables have
been clarified.
* jc/environ-docs:
environ: GIT_INDEX_VERSION affects not just a new repository
environ: simplify description of GIT_INDEX_FILE
environ: GIT_FLUSH should be made a usual Boolean
environ: explain Boolean environment variables
environ: document GIT_SSL_NO_VERIFY
"git grep" learned to expand the sparse-index more lazily and on
demand in a sparse checkout.
* sy/sparse-grep:
builtin/grep.c: integrate with sparse index
"scalar unregister" in a repository that is already been
unregistered reported an error.
* ds/scalar-unregister-idempotent:
string-list: document iterator behavior on NULL input
gc: replace config subprocesses with API calls
scalar: make 'unregister' idempotent
maintenance: add 'unregister --force'
Most credential helpers ignored unknown entries in a credential
description, but a few died upon seeing them. The latter were
taught to ignore them, too
* mc/cred-helper-ignore-unknown:
osxkeychain: clarify that we ignore unknown lines
netrc: ignore unknown lines (do not die)
wincred: ignore unknown lines (do not die)
"git remote rename" failed to rename a remote without fetch
refspec, which has been corrected.
* jk/remote-rename-without-fetch-refspec:
remote: handle rename of remote without fetch refspec
"git clone" did not like to see the "--bare" and the "--origin"
options used together without a good reason.
* jk/clone-allow-bare-and-o-together:
clone: allow "--bare" with "-o"
"git fsck" failed to release contents of tree objects already used
from the memory, which has been fixed.
* jk/fsck-on-diet:
parse_object_buffer(): respect save_commit_buffer
fsck: turn off save_commit_buffer
fsck: free tree buffers after walking unreachable objects
The version numbers do not mean much, but we may want to call the
first one in 2023 version 3.1 or something, but let's just increment
the second digit from the previous one for this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath that reads from the index v4 had unaligned memory
accesses, which has been corrected.
* vd/fix-unaligned-read-index-v4:
read-cache: avoid misaligned reads in index v4
Prepare for GNU [ef]grep that throw warning of their uses.
* dd/retire-efgrep:
t: convert fgrep usage to "grep -F"
t: convert egrep usage to "grep -E"
t: remove \{m,n\} from BRE grep usage
CodingGuidelines: allow grep -E
With a bit of header twiddling, use the native regexp library on
macOS instead of the compat/ one.
* ds/use-platform-regex-on-macos:
grep: fix multibyte regex handling under macOS
Two documentation issues exist in the technical docs for the bundle URI
feature.
First, there is an extraneous "the" across a linebreak, making the
nonsensical phrase "the bundle the list" which should just be "the
bundle list".
Secondly, the asciidoc update treats the string "`have`s" as starting a
"<code>" block, but the second tick is interpreted as an apostrophe
instead of a closing "</code>" tag. This causes entire sentences to be
formatted as code until the next one comes along. Simply adding a space
here does not work properly as the rendered HTML keeps that space.
Instead, restructure the sentence slightly to avoid using a plural,
allowing the HTML to render correctly.
Reported-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strvec "argv" is used to build a command for run_command_v_opt(),
but never freed. Use a constant string array instead, which doesn't
require any cleanup.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since its inception in d0bfd026a8 (Add basic infrastructure to assign
attributes to paths, 2007-04-12), the attribute code carries a little
bit of debug code that is conditionally compiled only when DEBUG_ATTR is
set. But since you have to know about it and make a special build of Git
to use it, it's not clear that it's helping anyone (and there are very
few mentions of it on the list over the years).
Meanwhile, it causes slight headaches. Since it's not built as part of a
regular compile, it's subject to bitrot. E.g., this was dealt with in
712efb1a42 (attr: make it build with DEBUG_ATTR again, 2013-01-15), and
it currently fails to build with DEVELOPER=1 since e810e06357 (attr:
tighten const correctness with git_attr and match_attr, 2017-01-27).
And it causes confusion with -Wunused-parameter; the "what" parameter of
fill_one() is unused in a normal build, but needed in a debug build.
Let's just get rid of this code (and the now-useless parameter).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback function for --trailer writes directly to the global
trailer_args and ignores opt->value completely. This is OK, since that's
where we expect to find the value. But it does mean the option
declaration isn't as clear. E.g., we have:
OPT_BOOL(0, "reset-author", &renew_authorship, ...),
OPT_CALLBACK_F(0, "trailer", NULL, ..., opt_pass_trailer)
In the first one we can see where the result will be stored, but in the
second, we get only NULL, and you have to go read the callback.
Let's pass &trailer_args, and use it in the callback. As a bonus, this
silences a -Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We declare the --object-dir option like:
OPT_CALLBACK(0, "object-dir", &opts.object_dir, ...);
but the pointer to opts.object_dir is completely unused. Instead, the
callback writes directly to a global. Which fortunately happens to be
opts.object_dir. So everything works as expected, but it's unnecessarily
confusing.
Instead, let's have the callback write to the option value pointer that
has been passed in. This also quiets a -Wunused-parameter warning (since
we don't otherwise look at "opt").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve_relative_url() function takes argc and argv parameters; it
then reads up to 3 elements of argv without looking at argc at all. At
first glance, this seems like a bug. But it has only one caller,
cmd__submodule_resolve_relative_url(), which does confirm that argc is
3.
The main reason this is a separate function is that it was moved from
library code in 96a28a9bc6 (submodule--helper: move
"resolve-relative-url-test" to a test-tool, 2022-09-01).
We can make this code simpler and more obviously safe by just inlining
the function in its caller. As a bonus, this silences a
-Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5411 starts a web server with no explicit language setting, so it uses
the system default. Ten of its tests expect it to return error messages
containing the prefix "fatal: ", emitted by die(). This prefix can be
localized since a1fd2cf8cd (i18n: mark message helpers prefix for
translation, 2022-06-21), however. As a result these ten tests break
for me on a system with LANG="de_DE.UTF-8" because the web server sends
localized messages with "Schwerwiegend: " instead of "fatal: ".
Fix these tests by passing LANG and LC_ALL to the web server, which are
set to "C" by t/test-lib.sh, to get untranslated messages on both sides.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass a constant string array directly to run_command_v_opt() instead of
copying it into a strvec first. This shortens the code and avoids heap
allocations.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation for 'fsmonitor.allowRemote' and 'fsmonitor.socketDir'.
Call-out experimental nature of 'fsmonitor.allowRemote' and limited
filesystem support for 'fsmonitor.socketDir'.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fsmonitor is not in a compatible state, warn with an appropriate message.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with macOS 10.15 (Catalina), Apple introduced a new feature
called 'firmlinks' in order to separate the boot volume into two
volumes, one read-only and one writable but still present them to the
user as a single volume. Along with this change, Apple removed the
ability to create symlinks in the root directory and replaced them with
'synthetic firmlinks'. See 'man synthetic.conf'
When FSEevents reports the path of changed files, if the path involves
a synthetic firmlink, the path is reported from the point of the
synthetic firmlink and not the real path. For example:
Real path:
/System/Volumes/Data/network/working/directory/foo.txt
Synthetic firmlink:
/network -> /System/Volumes/Data/network
FSEvents path:
/network/working/directory/foo.txt
This causes the FSEvents path to not match against the worktree
directory.
There are several ways in which synthetic firmlinks can be created:
they can be defined in /etc/synthetic.conf, the automounter can create
them, and there may be other means. Simply reading /etc/synthetic.conf
is insufficient. No matter what process creates synthetic firmlinks,
they all get created in the root directory.
Therefore, in order to deal with synthetic firmlinks, the root directory
is scanned and the first possible synthetic firmink that, when resolved,
is a prefix of the worktree is used to map FSEvents paths to worktree
paths.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If monitoring is done via fsmonitor hook rather than IPC there is no
need to check if the location of the Unix Domain socket (UDS) file is
on a remote filesystem.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the .git directory is on a remote filesystem, create the socket
file in 'fsmonitor.socketDir' if it is defined, else create it in $HOME.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
