Improve the incremental rebuilding support of "coccicheck" by
piggy-backing on the computed dependency information of the
corresponding *.o file, rather than rebuilding all <RULE>/<FILE> pairs
if either their corresponding file changes, or if any header changes.
This in effect uses the same method that the "sparse" target was made
to use in c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23), except that the dependency on the *.o file isn't a hard
one, we check with $(wildcard) if the *.o file exists, and if so we'll
depend on it.
This means that the common case of:
make
make coccicheck
Will benefit from incremental rebuilding, now changing e.g. a header
will only re-run "spatch" on those those *.c files that make use of
it:
By depending on the *.o we piggy-back on
COMPUTE_HEADER_DEPENDENCIES. See c234e8a0ec (Makefile: make the
"sparse" target non-.PHONY, 2021-09-23) for prior art of doing that
for the *.sp files. E.g.:
make contrib/coccinelle/free.cocci.patch
make -W column.h contrib/coccinelle/free.cocci.patch
Will take around 15 seconds for the second command on my 8 core box if
I didn't run "make" beforehand to create the *.o files. But around 2
seconds if I did and we have those "*.o" files.
Notes about the approach of piggy-backing on *.o for dependencies:
* It *is* a trade-off since we'll pay the extra cost of running the C
compiler, but we're probably doing that anyway. The compiler is much
faster than "spatch", so even though we need to re-compile the *.o to
create the dependency info for the *.c for "spatch" it's
faster (especially if using "ccache").
* There *are* use-cases where some would like to have *.o files
around, but to have the "make coccicheck" ignore them. See:
https://lore.kernel.org/git/20220826104312.GJ1735@szeder.dev/
For those users a:
make
make coccicheck SPATCH_USE_O_DEPENDENCIES=
Will avoid considering the *.o files.
* If that *.o file doesn't exist we'll depend on an intermediate file
of ours which in turn depends on $(FOUND_H_SOURCES).
This covers both an initial build, or where "coccicheck" is run
without running "all" beforehand, and because we run "coccicheck"
on e.g. files in compat/* that we don't know how to build unless
the requisite flag was provided to the Makefile.
Most of the runtime of "incremental" runs is now spent on various
compat/* files, i.e. we conditionally add files to COMPAT_OBJS, and
therefore conflate whether we *can* compile an object and generate
dependency information for it with whether we'd like to link it
into our binary.
Before this change the distinction didn't matter, but now one way
to make this even faster on incremental builds would be to peel
those concerns apart so that we can see that e.g. compat/mmap.c
doesn't depend on column.h.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Optimize the very slow "coccicheck" target to take advantage of
incremental rebuilding, and fix outstanding dependency problems with
the existing rule.
The rule is now faster both on the initial run as we can make better
use of GNU make's parallelism than the old ad-hoc combination of
make's parallelism combined with $(SPATCH_BATCH_SIZE) and/or the
"--jobs" argument to "spatch(1)".
It also makes us *much* faster when incrementally building, it's now
viable to "make coccicheck" as topic branches are merged down.
The rule didn't use FORCE (or its equivalents) before, so a:
make coccicheck
make coccicheck
Would report nothing to do on the second iteration. But all of our
patch output depended on all $(COCCI_SOURCES) files, therefore e.g.:
make -W grep.c coccicheck
Would do a full re-run, i.e. a a change in a single file would force
us to do a full re-run.
The reason for this (not the initial rationale, but my analysis) is:
* Since we create a single "*.cocci.patch+" we don't know where to
pick up where we left off, or how to incrementally merge e.g. a
"grep.c" change with an existing *.cocci.patch.
* We've been carrying forward the dependency on the *.c files since
63f0a758a0 (add coccicheck make target, 2016-09-15) the rule was
initially added as a sort of poor man's dependency discovery.
As we don't include other *.c files depending on other *.c files
has always been broken, as could be trivially demonstrated
e.g. with:
make coccicheck
make -W strbuf.h coccicheck
However, depending on the corresponding *.c files has been doing
something, namely that *if* an API change modified both *.c and *.h
files we'd catch the change to the *.h we care about via the *.c
being changed.
For API changes that happened only via *.h files we'd do the wrong
thing before this change, but e.g. for function additions (not
"static inline" ones) catch the *.h change by proxy.
Now we'll instead:
* Create a <RULE>/<FILE> pair in the .build directory, E.g. for
swap.cocci and grep.c we'll create
.build/contrib/coccinelle/swap.cocci.patch/grep.c.
That file is the diff we'll apply for that <RULE>-<FILE>
combination, if there's no changes to me made (the common case)
it'll be an empty file.
* Our generated *.patch
file (e.g. contrib/coccinelle/swap.cocci.patch) is now a simple "cat
$^" of all of all of the <RULE>/<FILE> files for a given <RULE>.
In the case discussed above of "grep.c" being changed we'll do the
full "cat" every time, so they resulting *.cocci.patch will always
be correct and up-to-date, even if it's "incrementally updated".
See 1cc0425a27 (Makefile: have "make pot" not "reset --hard",
2022-05-26) for another recent rule that used that technique.
As before we'll:
* End up generating a contrib/coccinelle/swap.cocci.patch, if we
"fail" by creating a non-empty patch we'll still exit with a zero
exit code.
Arguably we should move to a more Makefile-native way of doing
this, i.e. fail early, and if we want all of the "failed" changes
we can use "make -k", but as the current
"ci/run-static-analysis.sh" expects us to behave this way let's
keep the existing behavior of exhaustively discovering all cocci
changes, and only failing if spatch itself errors out.
Further implementation details & notes:
* Before this change running "make coccicheck" would by default end
up pegging just one CPU at the very end for a while, usually as
we'd finish whichever *.cocci rule was the most expensive.
This could be mitigated by combining "make -jN" with
SPATCH_BATCH_SIZE, see 960154b9c1 (coccicheck: optionally batch
spatch invocations, 2019-05-06).
There will be cases where getting rid of "SPATCH_BATCH_SIZE" makes
things worse, but a from-scratch "make coccicheck" with the default
of SPATCH_BATCH_SIZE=1 (and tweaking it doesn't make a difference)
is faster (~3m36s v.s. ~3m56s) with this approach, as we can feed
the CPU more work in a less staggered way.
* Getting rid of "SPATCH_BATCH_SIZE" particularly helps in cases
where the default of 1 yields parallelism under "make coccicheck",
but then running e.g.:
make -W contrib/coccinelle/swap.cocci coccicheck
I.e. before that would use only one CPU core, until the user
remembered to adjust "SPATCH_BATCH_SIZE" differently than the
setting that makes sense when doing a non-incremental run of "make
coccicheck".
* Before the "make coccicheck" rule would have to clean
"contrib/coccinelle/*.cocci.patch*", since we'd create "*+" and
"*.log" files there. Now those are created in
.build/contrib/coccinelle/, which is covered by the "cocciclean" rule
already.
Outstanding issues & future work:
* We could get rid of "--all-includes" in favor of manually
specifying a list of includes to give to "spatch(1)".
As noted upthread of [1] a naïve removal of "--all-includes" will
result in broken *.cocci patches, but if we know the exhaustive
list of includes via COMPUTE_HEADER_DEPENDENCIES we don't need to
re-scan for them, we could grab the headers to include from the
.depend.d/<file>.o.d and supply them with the "--include" option to
spatch(1).q
1. https://lore.kernel.org/git/87ft18tcog.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Per the rationale in 7b63ea5750 (Makefile: remove mandatory "spatch"
arguments from SPATCH_FLAGS, 2022-07-05) we have certain flags that
are truly mandatory, such as "--sp-file" and "--patch .". The
"--all-includes" flag is also critical, but per [1] we might want to
ad-hoc tweak it occasionally for testing or one-offs.
But being unable to set e.g. SPATCH_FLAGS="--verbose-parsing" without
breaking how our "spatch" works isn't ideal, i.e. before this we'd
need to know about the default include flags, and specify:
SPATCH_FLAGS="--all-includes --verbose-parsing".
If we were then to change the default include flag (e.g. to
"--recursive-includes") in the future any such one-off commands would
need to be correspondingly updated.
Let's instead leave the SPATCH_FLAGS for the user, while creating a
new SPATCH_INCLUDE_FLAGS to allow for ad-hoc testing of the include
strategy itself.
1. https://lore.kernel.org/git/20220823095733.58685-1-szeder.dev@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Amend the "coccicheck-test" rule added in f7ff6597a7 (cocci: add a
"coccicheck-test" target and test *.cocci rules, 2022-07-05) to stop
using "--all-includes". The flags we'll need for the tests are
different than the ones we'll need for our main source code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Split off the "; setting[...]" part of the comment added in In
960154b9c1 (coccicheck: optionally batch spatch invocations,
2019-05-06), and restore what we had before that, which was a comment
indicating that variables for the "coccicheck" target were being set
here.
When 960154b9c1 amended the heading to discuss SPATCH_BATCH_SIZE it
left no natural place to add a new comment about other flags that
preceded it. As subsequent commits will add such comments we need to
split the existing comment up.
The wrapping for the "SPATCH_BATCH_SIZE" is now a bit odd, but
minimizes the diff size. As a subsequent commit will remove that
feature altogether this is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix an issue with the "coccicheck" family of rules that's been here
since 63f0a758a0 (add coccicheck make target, 2016-09-15), unlike
e.g. "make grep.o" we wouldn't re-run it when $(SPATCH) or
$(SPATCH_FLAGS) changed. To test new flags we needed to first do a
"make cocciclean".
This now uses the same (copy/pasted) pattern as other "DEFINES"
rules. As a result we'll re-run properly. This can be demonstrated
e.g. on the issue noted in [1]:
$ make contrib/coccinelle/xcalloc.cocci.patch COCCI_SOURCES=promisor-remote.c V=1
[...]
SPATCH contrib/coccinelle/xcalloc.cocci
$ make contrib/coccinelle/xcalloc.cocci.patch COCCI_SOURCES=promisor-remote.c SPATCH_FLAGS="--all-includes --recursive-includes"
* new spatch flags
SPATCH contrib/coccinelle/xcalloc.cocci
SPATCH result: contrib/coccinelle/xcalloc.cocci.patch
$
1. https://lore.kernel.org/git/20220823095602.GC1735@szeder.dev/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Declare the contrib/coccinelle/<rule>.cocci.patch rules in such a way
as to allow TAB-completion, and slightly optimize the Makefile by
cutting down on the number of $(wildcard) in favor of defining
"coccicheck" and "coccicheck-pending" in terms of the same
incrementally filtered list.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix an issue with a rule added in 9b45f49981 (object-store: prepare
has_{sha1, object}_file to handle any repo, 2018-11-13). We've been
spewing out this warning into our $@.log since that rule was added:
warning: rule starting on line 21: metavariable F not used in the - or context code
We should do a better job of scouring our coccinelle log files for
such issues, but for now let's fix this as a one-off.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In f7ff6597a7 (cocci: add a "coccicheck-test" target and test *.cocci
rules, 2022-07-05) we abbreviated "_TEST" to "_T" to have it align
with the rest of the "="'s above it.
Subsequent commits will add more QUIET_SPATCH_* variables, so let's
stop abbreviating this, and indent it in preparation for adding more
of these variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix broken "&&-" chains and failures in early iterations of a loop.
* es/fix-chained-tests:
t5329: notice a failure within a loop
t: detect and signal failure within loop
t1092: fix buggy sparse "blame" test
t2407: fix broken &&-chains in compound statement
Update the version of Ubuntu used for GitHub Actions CI from 18.04
to 22.04.
* ds/github-actions-use-newer-ubuntu:
ci: update 'static-analysis' to Ubuntu 22.04
The preload-index codepath made copies of pathspec to give to
multiple threads, which were left leaked.
* ad/preload-plug-memleak:
preload-index: fix memleak
xcalloc(), imitating calloc(), takes "number of elements of the
array", and "size of a single element", in this order. A call that
does not follow this ordering has been corrected.
* sg/xcalloc-cocci-fix:
promisor-remote: fix xcalloc() argument order
The sequencer machinery translated messages left in the reflog by
mistake, which has been corrected.
* mg/sequencer-untranslate-reflog:
sequencer: do not translate command names
sequencer: do not translate parameters to error_resolve_conflict()
sequencer: do not translate reflog messages
Code clean-up to remove unused function parameters.
* jk/unused-fixes:
xdiff: drop unused mmfile parameters from xdl_do_patience_diff()
reflog: assert PARSE_OPT_NONEG in parse-options callbacks
reftable: drop unused parameter from reader_seek_linear()
verify_one_sparse(): drop unused parameters
match_pathname(): drop unused "flags" parameter
log-tree: drop unused commit param in remerge_diff()
xdiff: drop unused mmfile parameters from xdl_do_histogram_diff()
The bash prompt (in contrib/) learned to optionally indicate when
the index is unmerged.
* jd/prompt-show-conflict:
git-prompt: show presence of unresolved conflicts at command prompt
"scalar" now enables built-in fsmonitor on enlisted repositories,
when able.
* vd/scalar-enables-fsmonitor:
scalar: update technical doc roadmap with FSMonitor support
scalar unregister: stop FSMonitor daemon
scalar: enable built-in FSMonitor on `register`
scalar: move config setting logic into its own function
scalar-delete: do not 'die()' in 'delete_enlistment()'
scalar-[un]register: clearly indicate source of error
scalar-unregister: handle error codes greater than 0
scalar: constrain enlistment search
"git rev-list --ancestry-path=C A..B" is a natural extension of
"git rev-list A..B"; instead of choosing a subset of A..B to those
that have ancestry relationship with A, it lets a subset with
ancestry relationship with C.
* en/ancestry-path-in-a-range:
revision: allow --ancestry-path to take an argument
t6019: modernize tests with helper
rev-list-options.txt: fix simple typo
Test portability improvements.
* mt/rot13-in-c:
tests: use the new C rot13-filter helper to avoid PERL prereq
t0021: implementation the rot13-filter.pl script in C
t0021: avoid grepping for a Perl-specific string at filter output
The namespaces used by "log --decorate" from "refs/" hierarchy by
default has been tightened.
* ds/decorate-filter-tweak:
fetch: use ref_namespaces during prefetch
maintenance: stop writing log.excludeDecoration
log: create log.initialDecorationSet=all
log: add --clear-decorations option
log: add default decoration filter
log-tree: use ref_namespaces instead of if/else-if
refs: use ref_namespaces for replace refs base
refs: add array of ref namespaces
t4207: test coloring of grafted decorations
t4207: modernize test
refs: allow "HEAD" as decoration filter
Documentation for "git add --renormalize" has been improved.
source: <20220810144450.470-2-philipoakley@iee.email>
* po/doc-add-renormalize:
doc add: renormalize is not idempotent for CRCRLF
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
source: <pull.1312.v3.git.1659985672.gitgitgadget@gmail.com>
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
"git fsck" reads mode from tree objects but canonicalizes the mode
before passing it to the logic to check object sanity, which has
hid broken tree objects from the checking logic. This has been
corrected, but to help exiting projects with broken tree objects
that they cannot fix retroactively, the severity of anomalies this
code detects has been demoted to "info" for now.
source: <YvQcNpizy9uOZiAz@coredump.intra.peff.net>
* jk/fsck-tree-mode-bits-fix:
fsck: downgrade tree badFilemode to "info"
fsck: actually detect bad file modes in trees
tree-walk: add a mechanism for getting non-canonicalized modes
Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
source: <pull.1286.v2.git.1659965270.gitgitgadget@gmail.com>
* js/safe-directory-plus:
mingw: handle a file owned by the Administrators group correctly
mingw: be more informative when ownership check fails on FAT32
mingw: provide details about unsafe directories' ownership
setup: prepare for more detailed "dubious ownership" messages
setup: fix some formatting
Avoid repeatedly running getconf to ask libc version in the test
suite, and instead just as it once per script.
source: <pull.1311.git.1659620305757.gitgitgadget@gmail.com>
* pw/use-glibc-tunable-for-malloc-optim:
tests: cache glibc version check
A follow-up fix to a fix for a regression in 2.36.
source: <patch-1.1-2450e3e65cf-20220805T141402Z-avarab@gmail.com>
* ab/hooks-regression-fix:
hook API: don't segfault on strbuf_addf() to NULL "out"
Plug memory leaks in the failure code path in the "merge-ort" merge
strategy backend.
source: <pull.1307.v2.git.1659114727.gitgitgadget@gmail.com>
* js/ort-clean-up-after-failed-merge:
merge-ort: do leave trace2 region even if checkout fails
merge-ort: clean up after failed merge
Older gcc with -Wall complains about the universal zero initializer
"struct s = { 0 };" idiom, which makes developers' lives
inconvenient (as -Werror is enabled by DEVELOPER=YesPlease). The
build procedure has been tweaked to help these compilers.
source: <YuQ60ZUPBHAVETD7@coredump.intra.peff.net>
* jk/struct-zero-init-with-older-gcc:
config.mak.dev: squelch -Wno-missing-braces for older gcc
Conditionally allow building Python interpreter on Windows
source: <pull.1306.v2.git.1659109272.gitgitgadget@gmail.com>
* js/mingw-with-python:
mingw: remove unneeded `NO_CURL` directive
mingw: remove unneeded `NO_GETTEXT` directive
windows: include the Python bits when building Git for Windows
Fix build procedure for Windows that uses CMake so that it can pick
up the shell interpreter from local installation location.
source: <pull.1304.git.1658912756815.gitgitgadget@gmail.com>
* ca/unignore-local-installation-on-windows:
cmake: support local installations of git
The "diagnose" feature to create a zip archive for diagnostic
material has been lifted from "scalar" and made into a feature of
"git bugreport".
* vd/scalar-generalize-diagnose:
scalar: update technical doc roadmap
scalar-diagnose: use 'git diagnose --mode=all'
builtin/bugreport.c: create '--diagnose' option
builtin/diagnose.c: add '--mode' option
builtin/diagnose.c: create 'git diagnose' builtin
diagnose.c: add option to configure archive contents
scalar-diagnose: move functionality to common location
scalar-diagnose: move 'get_disk_info()' to 'compat/'
scalar-diagnose: add directory to archiver more gently
scalar-diagnose: avoid 32-bit overflow of size_t
scalar-diagnose: use "$GIT_UNZIP" in test
Fix deadlocks between main Git process and subprocess spawned via
the pipe_command() API, that can kill "git add -p" that was
reimplemented in C recently.
* jk/pipe-command-nonblock:
pipe_command(): mark stdin descriptor as non-blocking
pipe_command(): handle ENOSPC when writing to a pipe
pipe_command(): avoid xwrite() for writing to pipe
git-compat-util: make MAX_IO_SIZE define globally available
nonblock: support Windows
compat: add function to enable nonblocking pipes
The common ancestor negotiation exchange during a "git fetch"
session now leaves trace log.
* js/fetch-negotiation-trace:
fetch-pack: add tracing for negotiation rounds
An earlier optimization discarded a tree-object buffer that is
still in use, which has been corrected.
* jk/is-promisor-object-keep-tree-in-use:
is_promisor_object(): fix use-after-free of tree buffer
Further update the help messages given while merging submodules.
* en/submodule-merge-messages-fixes:
merge-ort: provide helpful submodule update message when possible
merge-ort: avoid surprise with new sub_flag variable
merge-ort: remove translator lego in new "submodule conflict suggestion"
submodule merge: update conflict error message
We try to write "|| return 1" (or "|| exit 1" in a subshell) at the
end of a sequence of &&-chained command in a loop of our tests, so
that a failure of any step during the earlier iteration of the loop
can properly be caught.
There is one loop in this test script that is used to compute the
expected result, that will be later compared with an actual output
produced by the "test-tool pack-mtimes" command. This particular
loop, however, is placed on the upstream side of a pipe, whose
non-zero exit code does not get noticed.
Emit a line that will never be produced by the "test-tool pack-mtimes"
to cause the later comparison to fail. As we use test_cmp to compare
this "expected output" file with the "actual output", the "error
message" we are emitting into the expected output stream will stand
out and shown to the tester.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub Actions scheduled a brownout of Ubuntu 18.04, which canceled all
runs of the 'static-analysis' job in our CI runs. Update to 22.04 to
avoid this as the brownout later turns into a complete deprecation.
The use of 18.04 was set in d051ed77ee (.github/workflows/main.yml: run
static-analysis on bionic, 2021-02-08) due to the lack of Coccinelle
being available on 20.04 (which continues today).
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the number of elements first and their size second, as expected
by xcalloc().
Patch generated with:
make SPATCH_FLAGS=--recursive-includes contrib/coccinelle/xcalloc.cocci.patch
Our default SPATCH_FLAGS ('--all-includes') doesn't catch this
transformation by default, unless used in combination with a large-ish
SPATCH_BATCH_SIZE which happens to put 'promisor-remote.c' with a file
that includes 'repository.h' directly in the same batch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
