* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* ne/pack-local-doc:
pack-objects documentation: Fix --honor-pack-keep as well.
pack-objects documentation: reword "objects that appear in the standard input"
Documentation: pack-objects: Clarify --local's semantics.
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
* gb/maint-submodule-env:
is_submodule_modified(): clear environment properly
submodules: ensure clean environment when operating in a submodule
shell setup: clear_local_git_env() function
rev-parse: --local-env-vars option
Refactor list of of repo-local env vars
* ne/pack-local-doc:
pack-objects documentation: Fix --honor-pack-keep as well.
pack-objects documentation: reword "objects that appear in the standard input"
Documentation: pack-objects: Clarify --local's semantics.
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git rebase --whitespace=fix HEAD~<N>" is supposed to
only clean up trailing whitespace, and the expectation is that it
cannot fail.
Unfortunately, if one commit adds a blank line at the end of a file
and a subsequent commit adds more non-blank lines after the blank
line, "git apply" (used indirectly by "git rebase") will fail to apply
the patch of the second commit.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" will not always succeed when used
on a series of patches in the following circumstances:
* One patch adds a blank line at the end of a file. (Since
--whitespace=fix is used, the blank line will *not* be added.)
* The next patch adds non-blank lines after the blank line
introduced in the first patch. That patch will not apply
because the blank line that is expected to be found at end
of the file is no longer there.
A patch series that starts by deleting lines at the end
will fail in a similar way.
Fix this problem by allowing a blank context line at the beginning
of a hunk to match if parts of it falls beyond end of the file.
We still require that at least one non-blank context line match
before the end of the file.
If the --ignore-space-change option is given (as well as the
--whitespace=fix option), blank context lines falling beyond the end
of the file will be copied unchanged to the target file (i.e. they
will have the same line terminators and extra spaces will not be
removed).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit, we will make it possible for blank context
lines to match beyond the end of the file. That means that a hunk
with a preimage that has more lines than present in the file may
be possible to successfully apply. Therefore, we must remove
the quick rejection test in find_pos().
find_pos() will already work correctly without the quick
rejection test, but that might not be obvious. Therefore,
comment the test for handling out-of-range line numbers in
find_pos() and cast the "line" variable to the same (unsigned)
type as img->nr.
What are performance implications of removing the quick
rejection test?
It can only help "git apply" to reject a patch faster. For example,
if I have a file with one million lines and a patch that removes
slightly more than 50 percent of the lines and try to apply that
patch twice, the second attempt will fail slightly faster
with the test than without (based on actual measurements).
However, there is the pathological case of a patch with many
more context lines than the default three, and applying that patch
using "git apply -C1". Without the rejection test, the running
time will be roughly proportional to the number of context lines
times the size of the file. That could be handled by writing
a more complicated rejection test (it would have to count the
number of blanks at the end of the preimage), but I don't find
that worth doing until there is a real-world use case that
would benfit from it.
It would be possible to keep the quick rejection test if
--whitespace=fix is not given, but I don't like that from
a testing point of view.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In match_fragment(), the line lengths in the preimage are updated
just before calling update_pre_post_images(). That is not
necessary, since update_pre_post_images() itself will
update the line lengths based on the buffer passed to it.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests have been broken since they were introduced in commits
ca2cedb (git-submodule: add support for --rebase., 2009-04-24) and
42b4917 (git-submodule: add support for --merge., 2009-06-03).
'git submodule init' expects the submodules to exist in the index.
In this case, the submodules don't exist and therefore looking for
the submodules will always fail. To make matters worse, git submodule
fails visibly to the user by saying:
error: pathspec 'rebasing' did not match any file(s) known to git.
Did you forget to 'git add'?
but doesn't return an error code. This allows the test to fail silently.
Fix it by adding the submodules first.
Cc: Johan Herland <johan@herland.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Has the same functionality as the '--cc' option and 'format.cc'
configuration variable but for the "To:" email header. Half of the code to
support this was already there.
With email the To: header usually more important than the Cc: header.
[jc: tests are by Stephen Boyd]
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
by requesting SVN::Core which is needed for the svn version.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn rebase used to have issues with CRLF conversion. Since these issues
have been fixed, we can safely revert the work-around that disables CRLF
conversion.
This reverts commit d3c9634eac.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Before commit d3c9634e, performing a "git svn rebase" that fetched a
change containing CRLFs corrupted the git-svn meta-data. This was
worked around in d3c9634e by setting core.autocrlf to "false" in the
per-repo config when initing the clone. However, if the config
variable was later changed, the corruption would still occur.
This patch tries to fix it while allowing core.autocrlf to be
enabled, by disabling filters when when hashing.
git-svn is currently the only call-site for hash_and_insert_object
(apart from the test-suite), so changing it should be safe.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>