If GIT_ASKPASS is not set and SSH_ASKPASS set, GIT_ASKPASS will
use SSH_ASKPASS.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds in the gitweb/README file a description of how to use gitweb
with several project roots using apache virtualhost rewrite rules.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the merge level, favor, and style flags into the xmparam_t struct.
This removes the bit twiddling with these three values into the one flags
parameter.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current union merge driver is implemented as an post process. But the
xdl_merge code is quite capable to produce the result by itself. Therefore
move it there.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoke get_http_walker() only when fetching with the dumb protocol.
Additionally, add an invocation to walker_free() after we're done using
the walker.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-walker implementation of walker->fetch_ref() doesn't do
anything special compared to http_fetch_ref() anyway.
Remove init_walker() invocation before fetching the ref, since we aren't
using the walker wrapper and don't need a walker instance anymore.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, all our http operations were done with http-walker. With the
new remote-curl helper, we find ourselves using http methods outside of
http-walker - for example, fetching info/refs.
Accomodate this by separating http_init() and http_cleanup() invocations
from http-walker.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no longer support for external grep, as per bbc09c2 (grep: rip
out support for external grep, 2010-01-12), so remove the reference to it
from the documentation.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for git-am using files with DOS line endings for various
combinations of `--keep-cr`, `--no-keep-cr` and `am.keepcr`.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the configuration `am.keepcr` for git-am. It also adds
`--no-keep-cr` parameter for git-am to give the possibility to
override configuration from command line.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c2ca1d7 (Allow mailsplit (and hence git-am) to handle mails with CRLF
line-endings, 2009-08-04) fixed "git mailsplit" to help people with
MUA whose output from save-as command uses CRLF as line terminators by
stripping CR at the end of lines.
However, when you know you are feeding output from "git format-patch"
directly to "git am", and especially when your contents have CR at the
end of line, such stripping is undesirable. To help such a use case,
teach --keep-cr option to "git am" and pass that to "git mailinfo".
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far this was an internal mechanism for rebase, but we will be exposing
it to the end users.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of TEST_OBJS in commit daa99a91 (Makefile: make sure
test helpers are rebuilt when headers change, 2010-01-26) moved a use
of $X to before the platform-specific section where it gets defined.
There are at least two ways to fix that:
- Change the definition of TEST_OBJS to use the = delayed
evaluation operator. This way, one need not worry about $(X)
needing to be defined before TEST_OBJS is set.
- Move the definition of TEST_OBJS to below the definition of $X.
Carry out the second. The later site of definition makes the code more
readable, since now a reader only has to look down one line to see what
TEST_OBJS is meant to be used for.
Oddly enough, with or without this change the behavior of the Makefile
is the same. Since TEST_PROGRAMS is defined with delayed evaluation,
the value of
TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
is independent of the value of $X when it is evaluated: the $X in the
pattern and the $X in $(TEST_PROGRAMS) will simply always cancel out.
Make sure $X has the expected expansion anyway to make the code and
the reader’s sanity more robust in the face of future changes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that the output format is correct for successful, rejected, and
flagrantly erroneous pushes.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script calling git push --porcelain --dry-run can see clearly from the
output if an update was rejected. However, it will probably need to distinguish
this condition from the push failing for other reasons, such as the remote not
being reachable.
This patch modifies git push --porcelain to print "Done" after the rest of its
output unless any errors have occurred. For the purpose of the "Done" line,
knowing a ref will be rejected in a --dry-run does not count as an error.
Actual rejections in non --dry-run pushes do count as errors.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-push prints the line "To <remoteurl>" before above each of the ref status
lines. In --porcelain mode, these "To <remoteurl>" lines go to the standard
error, but the ref status lines go to the standard output. This makes it
difficult for the process reading standard output to know which ref status lines
correspond to which remote. This patch sends the "To <remoteurl>" lines to the
the standard output instead.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These sort of messages typically go to the standard error.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to see if user input "git show :path" makes sense tried to access
the index without properly checking the array bound.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if gc.reflogexpire or gc.reflogexpire were set to "never"
or "false", the builtin default values were used instead.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, prune treated an expiration time of 0 to mean that no
expire argument was supplied, and everything should be pruned. As a
result, "prune --expire=never" would prune all unreachable objects,
regardless of their timestamp.
prune can be called with --expire=never automatically by gc, when the
gc.pruneExpire configuration is set to "never".
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing functions from a .dll into Git for Windows' perl is pretty slow,
so let's avoid importing if it is not necessary.
This seems particularly slow in virtualized enviroments. Before this
change (on my machine):
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 2m56.750s
user 0m3.129s
sys 2m39.232s
Afterwards:
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 0m33.407s
user 0m1.409s
sys 0m23.054s
git svn rebase -n goes from 3m7.046s to 0m10.312s.
Signed-off-by: Josh Robb <josh_robb@fastmail.fm>
Acked-by: Eric Wong <normalperson@yhbt.net>
If parent J is an ancestor of parent I, then parent J should be
discarded, not I.
Note that J is an ancestor of I if and only if rev-list I..J is emtpy,
which is what we are testing here.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When svn:mergeinfo contains two new parents in a specific order and
one is ancestor of the other, it is possible that git-svn discards the
wrong one. The first test case ("commit made to merged branch is
reachable from the merge") proves this.
The second test case ("merging two branches in one commit is detected
correctly") is just for completeness, since there was no test for
merging two (feature) branches to trunk in one commit.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
A few "svn cp" commands and commit commands were executed in incorrect
order. Therefore some of the desired commits were missing and some
were committed with wrong revision number in the commit message. This
made it hard to compare the produced git repository with the SVN
repository.
The dump file is updated too, but only the relevant parts and with
hand-edited timestamps to make history linear.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Requires a small change to wrap-for-bin.sh in order to work.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may later add a new configuration variable in "init" section that takes
a boolean value. Erroring out at the beginning of the config parser makes
life harder for later enhancement.
The existing configuration variable is parsed by git_config_pathname()
that checks and rejects init.templatedir that is unset without this extra
check. Remove it.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the synopsis for git-grep(1), show that --cached and <tree>... cannot
be used together.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for this particular page is to use AsciiDoc literal
strings only for options (`-x` or `--long`), but not for definition list
terms and not for <meta-vars>.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the equivalent of "/dev/null" is "nul". This implements
compatibility wrappers around fopen() and freopen() that check for this
particular file name.
The new tests exercise code paths where this is relevant.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is required on Windows because git-notes is now a built-in
rather than a shell script.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In gitmkdtemp, the return value of mktemp is not tested correctly.
mktemp() always returns its 'template' argument, even upon failure.
An error is signalled by making the template an empty string.
Signed-off-by: Filippo Negroni <fnegroni@flexerasoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mode bits for entries in a tree object should be an octal number
with minimum number of digits. Do not pad it with 0 to the left.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use PARSE_OPT_NONEG to disallow --no-<option> for message, file,
reedit-message and reuse-message. for which --no-<option> does not make
sense. This also simplifies the code in the option-handling callbacks.
Also, use strbuf_addch(... '\n') instead of strbuf_addstr(... "\n") in
couple of places.
Finally, improve the short-help by dividing the options into two
OPT_GROUPs.
Suggested-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than only clearing GIT_INDEX_FILE, take the list of environment
variables to clear from local_repo_env, appending the settings for
GIT_DIR and GIT_WORK_TREE.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>