Currently we only bother highlighting single-line hunks. The
rationale was that the purpose of highlighting is to point
out small changes between two similar lines that are
otherwise hard to see. However, that meant we missed similar
cases where two lines were changed together, like:
-foo(buf);
-bar(buf);
+foo(obj->buf);
+bar(obj->buf);
Each of those changes is simple, and would benefit from
highlighting (the "obj->" parts in this case).
This patch considers whole hunks at a time. For now, we
consider only the case where the hunk has the same number of
removed and added lines, and assume that the lines from each
segment correspond one-to-one. While this is just a
heuristic, in practice it seems to generate sensible
results (especially because we now omit highlighting on
completely-changed lines, so when our heuristic is wrong, we
tend to avoid highlighting at all).
Based on an original idea and implementation by Michał
Kiedrowicz.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code structure assumes that we will only look at
a pair of lines at any given time, and that the end result
should always be to output that pair. However, we want to
eventually handle multi-line hunks, which will involve
collating pairs of removed/added lines. Let's refactor the
code to return highlighted pairs instead of printing them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a change like:
-foo
+bar
we end up highlighting the entirety of both lines (since the
whole thing is changed). But the point of diff highlighting
is to pinpoint the specific change in a pair of lines that
are mostly identical. In this case, the highlighting is just
noise, since there is nothing to pinpoint, and we are better
off doing nothing.
The implementation looks for "interesting" pairs by checking
to see whether they actually have a matching prefix or
suffix that does not simply consist of colorization and
whitespace. However, the implementation makes it easy to
plug in other heuristics, too, like:
1. Depending on the source material, the set of "boring"
characters could be tweaked to include language-specific
stuff (like braces or semicolons for C).
2. Instead of saying "an interesting line has at least one
character of prefix or suffix", we could require that
less than N percent of the line be highlighted.
The simple "ignore whitespace, and highlight if there are
any matched characters" implemented by this patch seems to
give good results on git.git. I'll leave experimentation
with other heuristics to somebody who has a dataset that
does not look good with the current code.
Based on an original idea and implementation by Michał
Kiedrowicz.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These perl features can catch bugs, and we shouldn't be
violating any of the strict rules or creating any warnings,
so let's turn them on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several tests to use the sane_unset function introduced in
v1.7.3.1-35-g00648ba instead of the built-in unset function.
This fixes a failure I was having on t9130-git-svn-authors-file.sh on
Solaris, and prevents several other issues from occurring.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the very first commit to git.git we've been setting CC to
"gcc". Presumably this is behavior that Linus copied from the Linux
Makefile.
However unlike Linux Git is written in ANSI C and supports a multitude
of compilers, including Clang, Sun Studio, xlc etc. On my Linux box
"cc" is a symlink to clang, and on a Solaris box I have access to "cc"
is Sun Studio's CC.
Both of these are perfectly capable of compiling Git, and it's
annoying to have to specify CC=cc on the command-line when compiling
Git when that's the default behavior of most other portable programs.
So change the default to "cc". Users who want to compile with GCC can
still add "CC=gcc" to the make(1) command-line, but those users who
don't have GCC as their "cc" will see expected behavior, and as a
bonus we'll be more likely to smoke out new compilation warnings from
our distributors since they'll me using a more varied set of compilers
by default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Again this round mostly consists of fixes for 1.7.9 in preparation for
merging these topics down to maint for 1.7.9.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/find-pack-entry-recent-cache-invalidation:
find_pack_entry(): do not keep packed_git pointer locally
sha1_file.c: move the core logic of find_pack_entry() into fill_pack_entry()
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
Document bunch of bugfix topics to be merged down to 'maint' soonish
for 1.7.9.1 maintenance release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"perf" uses a the forked copy of this file, and wants to use these two
macros.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of sane ctype macros only depends on symbols in
git-compat-util.h not cache.h
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$X is appended to binary names for Windows builds (ie. git.exe).
Pollution from the environment can inadvertently trigger this behaviour,
resulting in 'git' turning into 'gitwhatever' without warning.
Signed-off-by: Michael Palimaka <kensington@astralcloak.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is necessary to write the else branch as a nested conditional. Also,
write the conditions with parentheses because we use them throughout the
Makefile.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag -n" did not check the type of the object it is reading the top n
lines from. At least, avoid showing the beginning of trees and blobs when
dealing with lightweight tags that point at them.
As the payload of a tag and a commit look similar in that they both start
with a header block, which is skipped for the purpose of "-n" output,
followed by human readable text, allow the message of commit objects to be
shown just like the contents of tag objects. This avoids regression for
people who have been using "tag -n" to show the log messages of commits
that are pointed at by lightweight tags.
Test script is from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
