A fair number of tests need to check that the filesystem supports file
names including "funny" characters, like newline, tab, and double-quote.
Jonathan Nieder suggested that this be extracted into a lazy prereq in
the top-level `test-lib.sh`. This patch effects that change.
The FUNNYNAMES prereq now uniformly requires support for newlines, tabs,
and double-quotes in filenames. This very slightly decreases the power
of some tests, which might have run previously on a system that supports
(e.g.) newlines and tabs but not double-quotes, but now will not. This
seems to me like an acceptable tradeoff for consistency.
One test (`t/t9902-completion.sh`) defined FUNNYNAMES to further require
the separators \034 through \037, the test for which was implemented
using the Bash-specific $'\034' syntax. I've elected to leave this one
as is, renaming it to FUNNIERNAMES.
After this patch, `git grep 'test_\(set\|lazy\)_prereq.*FUNNYNAMES'` has
only one result.
Signed-off-by: William Chargin <wchargin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some error messages did not quote filenames shown in it, which have
been fixed.
* sr/wrapper-quote-filenames:
wrapper.c: consistently quote filenames in error messages
The final step to make an empty string as a pathspec element
illegal. We started this by first deprecating and warning a
pathspec that has such an element in 2.11 (Nov 2016).
Hopefully we can merge this down to the 'master' by the end of the
year? A deprecation warning period that is about 1 year does not
sound too bad.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: die on empty strings as pathspec
t0027: do not use an empty string as a pathspec element
All other error messages in the file use quotes around the file name.
This change removes two translations as "could not write to '%s'" and
"could not close '%s'" are already translated and these two are the only
occurrences without quotes.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
[jc: adjusted tests I noticed were broken by the change]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as a pathspec element matches all paths. A buggy
script, however, could accidentally assign an empty string to a
variable that then gets passed to a Git command invocation, e.g.:
path=... compute a path to be removed in $path ...
git rm -r "$path"
which would unintentionally remove all paths in the current
directory.
The fix for this issue comprises of two steps. Step 1, which warns
that empty strings as pathspecs will become invalid, has already
been implemented in commit d426430 ("pathspec: warn on empty strings
as pathspec", 2016-06-22).
This patch is step 2. It removes the warning and throws an error
instead.
Signed-off-by: Emily Xie <emilyxxie@gmail.com>
Reported-by: David Turner <novalis@novalis.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test of failing `git rm -f` removes the write permissions on the
test directory, but fails to restore them if the test fails. This
means that the test temporary directory cannot be cleaned up, which
means that subsequent attempts to run the test fail mysteriously.
Instead, do the cleanup in a `test_when_finished` block so that it
can't be skipped.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
Suppose I have a superproject 'super', with two submodules 'super/sub'
and 'super/sub1'. 'super/sub' itself contains a submodule
'super/sub/subsub'. Now suppose I run, from within 'super':
echo hi >sub/subsub/stray-file
echo hi >sub1/stray-file
Currently we get would see the following output in git-status:
git status --short
m sub
? sub1
With this patch applied, the untracked file in the nested submodule is
displayed as an untracked file on the 'super' level as well.
git status --short
? sub
? sub1
This doesn't change the output of 'git status --porcelain=1' for nested
submodules, because its output is always ' M' for either untracked files
or local modifications no matter the nesting level of the submodule.
'git status --porcelain=2' is affected by this change in a nested
submodule, though. Without this patch it would report the direct submodule
as modified and having no untracked files. With this patch it would report
untracked files. Chalk this up as a bug fix.
This bug fix also affects the default output (non-short, non-porcelain)
of git-status, which is not tested here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I add an untracked file to a submodule or modify a tracked file,
currently "git status --short" treats the change in the same way as
changes to the current HEAD of the submodule:
$ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit
$ echo hello >gerrit/plugins/replication/stray-file
$ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap
$ git -C gerrit status --short
M plugins/replication
This is by analogy with ordinary files, where "M" represents a change
that has not been added yet to the index. But this change cannot be
added to the index without entering the submodule, "git add"-ing it,
and running "git commit", so the analogy is counterproductive.
Introduce new status letters " ?" and " m" for this. These are similar
to the existing "??" and " M" but mean that the submodule (not the
parent project) has new untracked files and modified files, respectively.
The user can use "git add" and "git commit" from within the submodule to
add them.
Changes to the submodule's HEAD commit can be recorded in the index with
a plain "git add -u" and are shown with " M", like today.
To avoid excessive clutter, show at most one of " ?", " m", and " M" for
the submodule. They represent increasing levels of change --- the last
one that applies is shown (e.g., " m" if there are both modified files
and untracked files in the submodule, or " M" if the submodule's HEAD
has been modified and it has untracked files).
While making these changes, we need to make sure to not break porcelain
level 1, which shares code with "status --short". We only change
"git status --short".
Non-short "git status" and "git status --porcelain=2" already handle
these cases by showing more detail:
$ git -C gerrit status --porcelain=2
1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication
$ git -C gerrit status
[...]
modified: plugins/replication (modified content, untracked content)
Scripts caring about these distinctions should use --porcelain=2.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight in 55856a35b2 (rm: absorb a submodules git dir
before deletion, 2016-12-27), as the body of the test changed without
adapting the test subject.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rm" used to refuse to remove a submodule when it has its own
git repository embedded in its working tree. It learned to move
the repository away to $GIT_DIR/modules/ of the superproject
instead, and allow the submodule to be deleted (as long as there
will be no loss of local modifications, that is).
* sb/submodule-rm-absorb:
rm: absorb a submodules git dir before deletion
submodule: rename and add flags to ok_to_remove_submodule
submodule: modernize ok_to_remove_submodule to use argv_array
submodule.h: add extern keyword to functions
When deleting a submodule, we need to keep the actual git directory around,
such that we do not lose local changes in there and at a later checkout
of the submodule we don't need to clone it again.
Now that the functionality is available to absorb the git directory of a
submodule, rewrite the checking in git-rm to not complain, but rather
relocate the git directories inside the superproject.
An alternative solution was discussed to have a function
`depopulate_submodule`. That would couple the check for its git directory
and possible relocation before the the removal, such that it is less
likely to miss the check in the future. But the indirection with such
a function added seemed also complex. The reason for that was that this
possible move of the git directory was also implemented in
`ok_to_remove_submodule`, such that this function could truthfully
answer whether it is ok to remove the submodule.
The solution proposed here defers all these checks to the caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the space between redirection and file name.
Also remove unnecessary invocations of subshells, such as
(cd submod &&
echo X >untracked
) &&
as there is no point of having the shell for functional purposes.
In case of a single Git command use the `-C` option to let Git cd into
the directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next line the `actual` is overwritten again, so no need to redirect
the output of checkout into that file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as a pathspec element matches all paths. A buggy
script, however, could accidentally assign an empty string to a
variable that then gets passed to a Git command invocation, e.g.:
path=... compute a path to be removed in $path ...
git rm -r "$paht"
which would unintentionally remove all paths in the current
directory.
The fix for this issue requires a two-step approach. As there may be
existing scripts that knowingly use empty strings in this manner,
the first step simply gives a warning that (1) tells that an empty
string will become an invalid pathspec element and (2) asks the user
to use "." if they mean to match all.
For step two, a follow-up patch several release cycles later will
remove the warning and throw an error instead.
This patch is the first step.
Signed-off-by: Emily Xie <emilyxxie@gmail.com>
Reported-by: David Turner <novalis@novalis.org>
Mentored-by: Michail Denchev <mdenchev@gmail.com>
Thanks-to: Sarah Sharp <sarah@thesharps.us> and James Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
MSYS2 actually allows to create files or directories whose names contain
tabs, newlines or colors, even if plain Win32 API cannot access them.
As we are using an MSYS2 bash to run the tests, such files or
directories are created successfully, but Git itself has no chance to
work with them because it is a regular Windows program, hence limited by
the Win32 API.
With this change, on Windows otherwise failing tests in
t3300-funny-names.sh, t3600-rm.sh, t3703-add-magic-pathspec.sh,
t3902-quoted.sh, t4016-diff-quote.sh, t4135-apply-weird-filenames.sh,
t9200-git-cvsexportcommit.sh, and t9903-bash-prompt.sh are skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the earlier patch to fix "trivial" &&-chain
breakage, these missing "&&" operators are not a serious
problem (e.g., we do not expect "echo" to fail).
Ironically, however, inserting them shows that some of the
commands _do_ fail. Specifically, some of the tests start by
making sure we are at a commit with the string "content" in
the file "foo". However, running "git commit" may fail
because the previous test left us in that state already, and
there is nothing to commit.
We could remove these commands entirely, but they serve to
document the test's assumptions, as well as make it robust
when an earlier test has failed. We could use test_might_fail
to handle all cases, but that would miss an unrelated
failure to make the commit. Instead, we can just pass the
--allow-empty flag to git-commit, which means that it will
not complain if our setup is a noop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AIX doesn't make a distiction between EEXIST and ENOTEMPTY; relying
on the strerror string for the rmdir failure is fragile. Just test
that the start of the string matches the Git controlled "failed to
rmdir..." error. The exact text of the OS generated error string
isn't important to the test.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Submodules" section of the "git rm" documentation mentions what will
happen when a submodule with a gitfile gets removed with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the removal, which does not remove the submodule from the
work tree like using the rm command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'choking "git rm" should not let it die with cruft' is
supposed to check 'git rm's behavior when interrupted by provoking a
SIGPIPE while 'git rm' is busily deleting files from a specially
crafted index.
This test is silently broken for the following reasons:
- The test crafts a special index by feeding a large number of index
entries with null shas to 'git update-index --index-info'. It was
OK back then when this test was introduced in commit 0693f9ddad
(Make sure lockfiles are unlocked when dying on SIGPIPE,
2008-12-18), but since commit 4337b5856f (do not write null sha1s to
on-disk index, 2012-07-28) null shas are not allowed in the on-disk
index causing 'git update-index' to error out.
- The barfing 'git update-index --index-info' should fail the test,
but it remains unnoticed because of the severely broken && chain:
the test's result depends solely on whether there is a stale lock
file left behind, but after 'git update-index' errors out 'git rm'
won't be executed at all.
To fix this test feed only non-null shas to 'git update-index' and
restore the && chain (partly by adding a missing && and by using the
test_when_finished helper instead of manual cleanup).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule removes the submodule's work tree
from that of the superproject and the gitlink from the index. But the
submodule's section in .gitmodules is left untouched, which is a leftover
of the now removed submodule and might irritate users (as opposed to the
setting in .git/config, this must stay as a reminder that the user showed
interest in this submodule so it will be repopulated later when an older
commit is checked out).
Let "git rm" help the user by not only removing the submodule from the
work tree but by also removing the "submodule.<submodule name>" section
from the .gitmodules file and stage both. This doesn't happen when the
"--cached" option is used, as it would modify the work tree. This also
silently does nothing when no .gitmodules file is found and only issues a
warning when it doesn't have a section for this submodule. This is because
the user might just use plain gitlinks without the .gitmodules file or has
already removed the section by hand before issuing the "git rm" command
(in which case the warning reminds him that rm would have done that for
him). Only when .gitmodules is found and contains merge conflicts the rm
command will fail and tell the user to resolve the conflict before trying
again.
Also extend the man page to inform the user about this new feature. While
at it promote the submodule sub-section to a chapter as it made not much
sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM".
In t7610 three uses of "git rm submod" had to be replaced with "git rm
--cached submod" because that test expects .gitmodules and the work tree
to stay untouched. Also in t7400 the tests for the remaining settings in
the .gitmodules file had to be changed to assert that these settings are
missing.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.rmHints to choose whether to display advice or not
when git rm fails. Defaults to true, in order to preserve current behavior.
As an example, the message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would look like, with advice.rmHints=false:
error: 'foo.txt' has changes staged in the index
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git rm' fails, it now displays a single message
with the list of files involved, instead of displaying
a list of messages with one file each.
As an example, the old message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
error: 'bar.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would now be displayed as:
error: the following files have changes staged in the index:
foo.txt
bar.txt
(use --cached to keep the file, or -f to force removal)
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have a symlink "d" that points to a directory, we
should not be able to remove "d/f". In the normal case,
where "d/f" does not exist in the index, we already disallow
this, as we only remove things that git knows about in the
index. So for something like:
ln -s /outside/repo foo
git add foo
git rm foo/bar
we will properly produce an error (as there is no index
entry for foo/bar). However, if there is an index entry for
the path (e.g., because the movement is due to working tree
changes that have not yet been reflected in the index), we
will happily delete it, even though the path we delete from the
filesystem is not the same as the path in the index.
This patch documents that failure with a test.
While this is a bug, it should not be possible to cause
serious data loss with it. For any path that does not have
an index entry, we will complain and bail. For a path which
does have an index entry, we will do the usual up-to-date
content check. So even if the deleted path in the filesystem
is not the same as the one we are removing from the index,
we do know that they at least have the same content, and
that the content is included in HEAD.
That means the worst case is not the accidental loss of
content, but rather confusion by the user when a copy of a
file another part of the tree is removed. Which makes this
bug a minor and hard-to-trigger annoyance rather than a
data-loss bug (and hence the fix can be saved for a rainy
day when somebody feels like working on it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught "rm" that it is safe to consider
"d/f" removed when "d" has become a non-directory. This
patch adds a test for the opposite: a file "d" that becomes
a directory.
In this case, "git rm" does need to complain, because we
should not be removing arbitrary content under "d". Git
already behaves correctly, but let's make sure that remains
the case by protecting the behavior with a test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we used to have an index entry "d/f", but "d" has been
replaced by a non-directory entry, the user may still want
to run "git rm" to delete the stale index entry. They could
use "git rm --cached" to just touch the index, but "git rm"
should also work: we explicitly try to handle the case that
the file has already been removed from the working tree.
However, because unlinking "d/f" in this case will not yield
ENOENT, but rather ENOTDIR, we do not notice that the file
is already gone. Instead, we report it as an error.
The simple solution is to treat ENOTDIR in this case exactly
like ENOENT; all we want to know is whether the file is
already gone, and if a leading path is no longer a
directory, then by definition the sub-path is gone.
Reported-by: jpinheiro <7jpinheiro@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With d4a7ffa (tests: "cp -a" is a GNUism, 2012-10-08), we got rid of
most of them, but the ones in a topic that was still in flight were
missed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doing a "git rm submod/" on a submodule results in an error:
fatal: pathspec 'submod/' did not match any files
This is really inconvenient as e.g. using TAB completion in a shell on a
submodule automatically adds the trailing '/' when it completes the path
of the submodule directory. The user has then to remove the '/' herself to
make a "git rm" succeed. Doing a "git rm -r somedir/" is working fine, so
there is no reason why that shouldn't work for submodules too.
Teach git rm to not error out when a '/' is appended to the path of a
submodule. Achieve this by chopping off trailing slashes from the path
names given if they represent directories. Add tests to make sure that
logic only applies to directories and not to files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c91cfd19 (tests: A SANITY test prereq for testing if we're
root, 2010-08-06) introduced a SANITY prerequisite which had very
similar semantics to RO_DIR. That commit removed the code to set
RO_DIR, but forgot to replace RO_DIR with SANITY in test #15.
In order not to skip test 15 unnecessarily, since RO_DIR will never
be set, we pass the SANITY prerequisite instead.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two prerequisites:
- The filesystem supports names with tabs or new-lines.
- Files cannot be removed if their containing directory is read-only.
Previously, whether these preconditions are satisified was tested inside
test_expect_success. We move these tests outside because, strictly
speaking, they are not part of the tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
There were some uses of 'say' inside test_expect_success. But if the tests
were not run in verbose mode, this message went to /dev/null. Pull them out
of test_expect_success.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Some tests report that some tests will be skipped. They used
'test_expect_success' with a trivially successful test. Nowadays we have
the helper function 'say' for this purpose.
In on case, 'say_color skip' is replaced by 'say' because the former is
not intended as a public API.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
We cleaned up lockfiles upon receiving the usual suspects HUP, TERM, QUIT
but a wicked user could kill us of asphyxiation by piping our output to a
pipe that does not read. Protect ourselves by catching SIGPIPE and clean
up the lockfiles as well in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the extended index flag mechanism introduced earlier to mark
the entries added to the index via "git add -N" with CE_INTENT_TO_ADD.
The logic to detect an "intent to add" entry for the purpose of allowing
"git rm --cached $path" is tightened to check not just for a staged empty
blob, but with the CE_INTENT_TO_ADD bit. This protects an empty blob that
was explicitly added and then modified in the work tree from being dropped
with this sequence:
$ >empty
$ git add empty
$ echo "non empty" >empty
$ git rm --cached empty
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is different between the working tree copy, the index, and the
HEAD, then we do not allow it to be deleted without --force.
However, this is overly tight in the face of "git add --intent-to-add":
$ git add --intent-to-add file
$ : oops, I don't actually want to stage that yet
$ git rm --cached file
error: 'empty' has staged content different from both the
file and the HEAD (use -f to force removal)
$ git rm -f --cached file
Unfortunately, there is currently no way to distinguish between an empty
file that has been added and an "intent to add" file. The ideal behavior
would be to disallow the former while allowing the latter.
This patch loosens the safety valve to allow the deletion only if we are
deleting the cached entry and the cached content is empty. This covers
the intent-to-add situation, and assumes there is little harm in not
protecting users who have legitimately added an empty file. In many
cases, the file will still be empty, in which case the safety valve does
not trigger anyway (since the content remains untouched in the working
tree). Otherwise, we do remove the fact that no content was staged, but
given that the content is by definition empty, it is not terribly
difficult for a user to recreate it.
However, we still document the desired behavior in the form of two
tests. One checks the correct removal of an intent-to-add file. The other
checks that we still disallow removal of empty files, but is marked as
expect_failure to indicate this compromise. If the intent-to-add feature
is ever extended to differentiate between normal empty files and
intent-to-add files, then the safety valve can be re-tightened.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since "git rm" is supposed to be porcelain, we should convince it to
be user friendly by refreshing the index itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
