The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
There are some situations in which we want to store an object ID into
struct object_id without the_hash_algo necessarily being set correctly.
One such case is when cloning a repository, where we must read refs from
the remote side without having a repository from which to read the
preferred algorithm.
In this cases, we may have the_hash_algo set to SHA-1, which is the
default, but read refs into struct object_id that are SHA-256. When
copying these values, we will want to copy them completely, not just the
first 20 bytes. Consequently, make sure that oidcpy copies the maximum
number of bytes at all times, regardless of the setting of
the_hash_algo.
Since oidcpy and hashcpy are no longer functionally identical, remove
the Cocinelle object_id transformations that convert from one into the
other.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes are described in CHANGES.
Contributions-by: Matthieu Moy <git@matthieu-moy.fr>
Contributions-by: William Stewart <william.stewart@booking.com>
Contributions-by: Ville Skyttä <ville.skytta@iki.fi>
Contributions-by: Dirk Olmes <dirk.olmes@codedo.de>
Contributions-by: Björn Kautler <Bjoern@Kautler.net>
Contributions-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Contributions-by: Gareth Pye <garethp@gpsatsys.com.au>
Contributions-by: David Lazar <lazard@csail.mit.edu>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:
git show HEAD:fo<Tab>
git show HEAD:ab<Tab>
The completion results in bash/zsh:
git show HEAD:foo bar.txt
git show HEAD:abc def/
Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().
Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:
git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>
should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:
git show HEAD:abc\ def/<Tab>
should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.
__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:
abc def/Z
foo bar.txt Z
where Z is the mark of the EOL.
- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:
git show HEAD:foo\ bar.txt\ <CURSOR>
So git will try to find a file named 'foo bar.txt ' instead.
- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:
git show HEAD:abc\ def/ <CURSOR>
So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.
Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following is the description of -Q flag of zsh compadd [1]:
This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the command
line.
Let's say there is a file named 'foo bar.txt' in repository, but it's
not yet added to the repository. Then the following command triggers a
completion:
git add fo<Tab>
git add 'fo<Tab>
git add "fo<Tab>
The completion results in bash:
git add foo\ bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"
While them in zsh:
git add foo bar.txt
git add 'foo bar.txt'
git add "foo bar.txt"
The first one, where the pathname is not enclosed in quotes, should
escape the space with a backslash, just like bash completion does.
Otherwise, this leads git to think there are two files; foo, and
bar.txt.
The main cause of this behavior is __gitcomp_file_direct(). The both
implementions of bash and zsh are called with an argument 'foo bar.txt',
but only bash adds a backslash before a space on command line.
[1]: http://zsh.sourceforge.net/Doc/Release/Completion-Widgets.html
Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A coding convention around the Coccinelle semantic patches to have
two classes to ease code migration process has been proposed and
its support has been added to the Makefile.
* sb/cocci-pending:
coccicheck: introduce 'pending' semantic patches
Teach `make coccicheck` to avoid patches named "*.pending.cocci" and
handle them separately in a new `make coccicheck-pending` instead.
This means that we can separate "critical" patches from "FYI" patches.
The former target can continue causing Travis to fail its static
analysis job, while the latter can let us keep an eye on ongoing
(pending) transitions without them causing too much fallout.
Document the intended use-cases around these two targets.
As the process around the pending patches is not yet fully explored,
leave that out.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Based-on-work-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The support for format-patch (and send-email) by the command-line
completion script (in contrib/) has been simplified a bit.
* nd/complete-format-patch:
completion: use __gitcomp_builtin for format-patch
The command line completion machinery (in contrib/) has been
updated to allow the completion script to tweak the list of options
that are reported by the parse-options machinery correctly.
* nd/completion-negation:
completion: fix __gitcomp_builtin no longer consider extra options
This helps format-patch gain completion for a couple new options,
notably --range-diff.
Since send-email completion relies on $__git_format_patch_options
which is now reduced, we need to do something not to regress
send-email completion.
The workaround here is implement --git-completion-helper in
send-email.perl just as a bridge to "format-patch --git-completion-helper".
This is enough to use __gitcomp_builtin on send-email (to take
advantage of caching).
In the end, send-email.perl can probably reuse the same info it passes
to GetOptions() to generate full --git-completion-helper output so
that we don't need to keep track of its options in git-completion.bash
anymore. But that's something for another boring day.
Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" learned to take the "--[no-]gui" option, just like
"git difftool" does.
* dl/mergetool-gui-option:
doc: document diff/merge.guitool config keys
completion: support `git mergetool --[no-]gui`
mergetool: accept -g/--[no-]gui as arguments
More codepaths are moving away from hardcoded hash sizes.
* bc/hash-transition-part-15:
rerere: convert to use the_hash_algo
submodule: make zero-oid comparison hash function agnostic
apply: rename new_sha1_prefix and old_sha1_prefix
apply: replace hard-coded constants
tag: express constant in terms of the_hash_algo
transport: use parse_oid_hex instead of a constant
upload-pack: express constants in terms of the_hash_algo
refs/packed-backend: express constants using the_hash_algo
packfile: express constants in terms of the_hash_algo
pack-revindex: express constants in terms of the_hash_algo
builtin/fetch-pack: remove constants with parse_oid_hex
builtin/mktree: remove hard-coded constant
builtin/repack: replace hard-coded constants
pack-bitmap-write: use GIT_MAX_RAWSZ for allocation
object_id.cocci: match only expressions of type 'struct object_id'
Build update for "git subtree" (in contrib/) documentation pages.
* ch/subtree-build:
Revert "subtree: make install targets depend on build targets"
subtree: make install targets depend on build targets
subtree: add build targets 'man' and 'html'
The result of coverage test can be combined with "git blame" to
check the test coverage of code introduced recently with a new
'coverage-diff' tool (in contrib/).
* ds/coverage-diff:
contrib: add coverage-diff script
Various subtree fixes.
* rs/subtree-fixes:
subtree: performance improvement for finding unexpected parent commits
subtree: improve decision on merges kept in split
subtree: use commits before rejoins for splits
subtree: make --ignore-joins pay attention to adds
subtree: refactor split of a commit into standalone method
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Anmol Mago <anmolmago@gmail.com>
Signed-off-by: Brian Ho <briankyho@gmail.com>
Signed-off-by: David Lu <david.lu97@outlook.com>
Signed-off-by: Ryan Wang <shirui.wang@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is more common to use post-increment than pre-increment when the
side effect is the primary thing we want in our code and in C in
general (unlike C++).
Initializing a variable to 0, incrementing it every time we do
something, and checking if we have already done that thing to guard
the code to do that thing, is easier to understand when written
if (u++)
; /* we've done that! */
else
do_it(); /* just once. */
but if you try to use pre-increment, you end up with a less natural
looking
if (++u > 1)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_builtin() has the main completion list provided by
git xxx --git-completion-helper
but the caller can also add extra options that is not provided by
--git-completion-helper. The only call site that does this is "git
difftool" completion.
This support is broken by b221b5ab9b (completion: collapse extra
--no-.. options - 2018-06-06), which adds a special value "--" to mark
that the rest of the options can be hidden by default. The commit
forgets the fact that extra options are appended after
"$(git xxx --git-completion-helper)", i.e. after this "--", and will
be incorrectly hidden as well.
Prepend the extra options before "$(git xxx --git-completion-helper)"
to avoid this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach bash completion that "git fetch --multiple" only takes remote
names as arguments and no refspecs.
* nd/complete-fetch-multiple-args:
completion: support "git fetch --multiple"
This reverts commit 744f7c4c31.
These targets do depend on the fact that each prereq is explicitly
listed via their use of $^, which I failed to notice, and broke the
build.
Now that we have build targets let the install targets depend on them.
Also make the targets phony.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of our semantic patches in 'contrib/coccinelle/object_id.cocci'
turn calls of SHA1-specific functions into calls of their
corresponding object_id counterparts, e.g. sha1_to_hex() to
oid_to_hex(). These semantic patches look something like this:
@@
expression E1;
@@
- sha1_to_hex(E1.hash)
+ oid_to_hex(&E1)
and match the access to the 'hash' field in any data type, not only in
'struct object_id', and, consquently, can produce wrong
transformations.
Case in point is the recent hash function transition patch "rerere:
convert to use the_hash_algo" [1], which, among other things, renamed
'struct rerere_dir's 'sha1' field to 'hash', and then 'make
coccicheck' started to suggest the following wrong transformations for
'rerere.c' [2]:
- return sha1_to_hex(id->collection->hash);
+ return oid_to_hex(id->collection);
and
- DIR *dir = opendir(git_path("rr-cache/%s", sha1_to_hex(rr_dir->hash)));
+ DIR *dir = opendir(git_path("rr-cache/%s", oid_to_hex(rr_dir)));
Avoid such wrong transformations by tightening semantic patches in
'object_id.cocci' to match only type of or pointers to 'struct
object_id'.
[1] https://public-inbox.org/git/20181008215701.779099-15-sandals@crustytoothpaste.net/
[2] https://travis-ci.org/git/git/jobs/440463476#L580
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After testing a previous patch at larger scale, a performance issue was
detected when using git show to locate parent revisions, with a single
run of the git show command taking 2 seconds or longer in a complex repo.
When the command is required tens or hundreds of times in a run of the
script, the additional wait time is unaccepatable. Replacing the command
with git rev-parse resulted in significantly increased performance, with
the command in question returning instantly.
Signed-off-by: Roger Strain <rstrain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove git-cherry from Bash completion because plumbing
commands do not belong there.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have targets 'install-man' and 'install-html', let's add build
targets as well.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have coverage targets in our Makefile for using gcov to display line
coverage based on our test suite. The way I like to do it is to run:
make coverage-test
make coverage-report
This leaves the repo in a state where every X.c file that was covered has
an X.c.gcov file containing the coverage counts for every line, and "#####"
at every uncovered line.
There have been a few bugs in recent patches what would have been caught
if the test suite covered those blocks (including a few of mine). I want
to work towards a "sensible" amount of coverage on new topics. In my opinion,
this means that any logic should be covered, but the 'die()' blocks covering
very unlikely (or near-impossible) situations may not warrant coverage.
It is important to not measure the coverage of the codebase by what old code
is not covered. To help, I created the 'contrib/coverage-diff.sh' script.
After creating the coverage statistics at a version (say, 'topic') you can
then run
contrib/coverage-diff.sh base topic
to see the lines added between 'base' and 'topic' that are not covered by the
test suite. The output uses 'git blame -s' format so you can find the commits
responsible and view the line numbers for quick access to the context, but
trims leading tabs in the file contents to reduce output width.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since stash list accepts git-log options, add the following useful
options that make sense in the context of the `git stash list` command:
--name-status --oneline --patch-with-stat
Signed-off-by: Steven Fernandez <steve@lonetwin.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple identical parents are detected for a commit being considered
for copying, explicitly check whether one is the common merge base between
the commits. If so, the other commit can be used as the identical parent;
if not, a merge must be performed to maintain history.
In some situations two parents of a merge commit may appear to both have
identical subtree content with each other and the current commit. However,
those parents can potentially come from different commit graphs.
Previous behavior would simply select one of the identical parents to
serve as the replacement for this commit, based on the order in which they
were processed.
New behavior compares the merge base between the commits to determine if
a new merge commit is necessary to maintain history despite the identical
content.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds recursive evaluation of parent commits which were not part of the
initial commit list when performing a split.
Split expects all relevant commits to be reachable from the target commit
but not reachable from any previous rejoins. However, a branch could be
based on a commit prior to a rejoin, then later merged back into the
current code. In this case, a parent to the commit will not be present in
the initial list of commits, trigging an "incorrect order" warning.
Previous behavior was to consider that commit to have no parent, creating
an original commit containing all subtree content. This commit is not
present in an existing subtree commit graph, changing commit hashes and
making pushing to a subtree repo impossible.
New behavior will recursively check these unexpected parent commits to
track them back to either an earlier rejoin, or a true original commit.
The generated synthetic commits will properly match previously-generated
commits, allowing successful pushing to a prior subtree repo.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes the behavior of --ignore-joins to always consider a subtree add
commit, and ignore only splits and squashes.
The --ignore-joins option is documented to ignore prior --rejoin commits.
However, it additionally ignored subtree add commits generated when a
subtree was initially added to a repo.
Due to the logic which determines whether a commit is a mainline commit
or a subtree commit (namely, the presence or absence of content in the
subtree prefix) this causes commits before the initial add to appear to
be part of the subtree. An --ignore-joins split would therefore consider
those commits part of the subtree history and include them at the
beginning of the synthetic history, causing the resulting hashes to be
incorrect for all later commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a particularly complex repo, subtree split was not creating
compatible splits for pushing back to a separate repo. Addressing
one of the issues requires recursive handling of parent commits
that were not initially considered by the algorithm. This commit
makes no functional changes, but relocates the code to be called
recursively into a new method to simply comparisons of later
commits.
Signed-off-by: Strain, Roger L <roger.strain@swri.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --multiple is given, the remaining arguments are remote names,
not one remote followed by zero or more refspec. Detect this case,
disable refspec completion, and pretend no remote is seen in order to
complete multiple of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the partner patch to the previous one, but covering
the "hash" variants instead of "oid". Note that our
coccinelle rule is slightly more complex to avoid triggering
the call in hasheq().
I didn't bother to add a new rule to convert:
- hasheq(E1->hash, E2->hash)
+ oideq(E1, E2)
Since these are new functions, there won't be any such
existing callers. And since most of the code is already
using oideq, we're not likely to introduce new ones.
We might still see "!hashcmp(E1->hash, E2->hash)" from topics
in flight. But because our new rule comes after the existing
ones, that should first get converted to "!oidcmp(E1, E2)"
and then to "oideq(E1, E2)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we want to suppress a coccinelle transformation
inside a particular function. For example, in finding
conversions of hashcmp() to oidcmp(), we should not convert
the call in oidcmp() itself, since that would cause infinite
recursion. We write that like this:
@@
identifier f != oidcmp;
expression E1, E2;
@@
f(...) {...
- hashcmp(E1->hash, E2->hash)
+ oidcmp(E1, E2)
...}
to match the interior of any function _except_ oidcmp().
Unfortunately, this doesn't catch all cases (e.g., the one
in sequencer.c that this patch fixes). The problem, as
explained by one of the Coccinelle developers in [1], is:
For transformation, A ... B requires that B occur on every
execution path starting with A, unless that execution path
ends up in error handling code. (eg, if (...) { ...
return; }). Here your A is the start of the function. So
you need a call to hashcmp on every path through the
function, which fails when you add ifs.
[...]
Another issue with A ... B is that by default A and B
should not appear in the matched region. So your original
rule matches only the case where every execution path
contains exactly one call to hashcmp, not more than one.
One way to solve this is to put the pattern inside an
angle-bracket pattern like "<... P ...>", which allows zero
or more matches of P. That works (and is what this patch
does), but it has one drawback: it matches more than we care
about, and Coccinelle uses extra CPU. Here are timings for
"make coccicheck" before and after this patch:
[before]
real 1m27.122s
user 7m34.451s
sys 0m37.330s
[after]
real 2m18.040s
user 10m58.310s
sys 0m41.549s
That's not ideal, but it's more important for this to be
correct than to be fast. And coccicheck is already fairly
slow (and people don't run it for every single patch). So
it's an acceptable tradeoff.
There _is_ a better way to do it, which is to record the
position at which we find hashcmp(), and then check it
against the forbidden function list. Like:
@@
position p : script:python() { p[0].current_element != "oidcmp" };
expression E1,E2;
@@
- hashcmp@p(E1->hash, E2->hash)
+ oidcmp(E1, E2)
This is only a little slower than the current code, and does
the right thing in all cases. Unfortunately, not all builds
of Coccinelle include python support (including the ones in
Debian). Requiring it may mean that fewer people can easily
run the tool, which is worse than it simply being a little
slower.
We may want to revisit this decision in the future if:
- builds with python become more common
- we find more uses for python support that tip the
cost-benefit analysis
But for now this patch sticks with the angle-bracket
solution, and converts all existing cocci patches. This
fixes only one missed case in the current code, though it
makes a much better difference for some new rules I'm adding
(converting "!hashcmp()" to "hasheq()" misses over half the
possible conversions using the old form).
[1] https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/
Helped-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
Add a script (in contrib/) to help users of VSCode work better with
our codebase.
* js/vscode:
vscode: let cSpell work on commit messages, too
vscode: add a dictionary for cSpell
vscode: use 8-space tabs, no trailing ws, etc for Git's source code
vscode: wrap commit messages at column 72 by default
vscode: only overwrite C/C++ settings
mingw: define WIN32 explicitly
cache.h: extract enum declaration from inside a struct declaration
vscode: hard-code a couple defines
contrib: add a script to initialize VS Code configuration
After using this command extensively for the last two months, this
developer came to the conclusion that even if the dual color mode still
leaves a lot of room for confusion about what was actually changed, the
non-dual color mode is substantially worse in that regard.
Therefore, we really want to make the dual color mode the default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion of `git range-diff` is very convenient, especially
given that the revision arguments to specify the commit ranges to
compare are typically more complex than, say, what is normally passed
to `git log`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
