No files use the variant of block-title with verse-block, but
such a case would have generated broken docbook XML (<simpara> is
not allowed inside <para>). This fixes the potential deviation from
valid docbook XML.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the docbook-xsl-no-raw-roff variant match the
no-docbook-xsl-no-raw-roff variant in terms of which XML tag is
used to wrap listing block text (delimited with lines of dashes).
e920b56 (Tweak asciidoc output to work with broken docbook-xsl,
2006-03-05) says docbook-xsl 1.68 needs <literallayout>. This
<screen> usages was in the old, 1.72-only section. But since it
is now the "roff-less" section, it probably makes sense to make it
symmetric with the "roff-ful" section.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "spurious .sp" code should be independent of docbook-xsl
versions.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a couple of XSL parameters that act to silence
informational/warning messages generated when running xmlto from
manpage-1.72.xsl to manpage-base.xsl.
Since unused parameters are silently ignored, there is no problem
if some version of docbook-xsl does not know about these
parameters. The only problem might be if a version of docbook-xsl
uses the parameters for alternate functionality. Since both
parameters have fairly specific names such a situation is
unlikely.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parametrize the backslash and dot characters that are used to
generate roff control sequences in manpage-base.xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The described issues are compiled from the tests by Michael Haggerty and me.
Because it is not apparent that these can be fixed anytime soon at least warn
unwary users not to rely on the inbuilt cvsimport to much.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command may not be the best place to add this new feature, but
$ git check-ref-format --branch "@{-1}"
allows Porcelains to figure out what branch you were on before the last
branch switching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This specifier represents the sanitized and filename friendly subject
line of a commit. No checks are made against the length of the string,
so users may need to trim the result to the desired length if using as a
filename. This is commonly used by format-patch to massage commit
subjects into filenames and output patches to files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of the post-checkout hook just talks
about git-checkout. But recently git-clone was changed to
call it too, unless the -no-checkout (-n) option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options --committer-date-is-author-date and --ignore-date
to git-rebase. They were introduced in commit a79ec62d0 for git-am.
These options imply --force-rebase.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/color-grep:
grep: prefer builtin over external one when coloring results
grep: cast printf %.*s "precision" argument explicitly to int
grep: add support for coloring with external greps
grep: color patterns in output
grep: add pmatch and eflags arguments to match_one_pattern()
grep: remove grep_opt argument from match_expr_eval()
grep: micro-optimize hit collection for AND nodes
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
'git branch -f a b' resets a to b when a exists, rather then deleting a.
Say so in the documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git push without any refspecs is attempted, display a warning.
The current default behavior is to push all matching refspecs, which
may come as a surprise to new users, so the warning shows how
push.default can be configured and what the possible values are.
Traditionalists who wish to keep the current behaviour are also told
how to configure this once and never see the warning again.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option --replace-all only allows at least two arguments, so
documentation was needing to be updated accordingly. A test showing
that the command fails with only one parameter is also provided.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange the example usage of
git filter-branch --index-filter 'git rm --cached ...'
so that --ignore-unmatch is in the main example block. People keep
stumbling over the (lack of this) option to the point where it is a
FAQ, so we would want to expose the most common usage where it stands
out.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a
value of an unknown option could be mistakenly classified as a
non-option, stopping the parser early. E.g.:
git cmd --known --unknown value arg0 arg1
The parser should have stopped at "arg0", but it already stops at
"value".
This patch makes parse_options() die if the two flags are used in
combination.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
Add the config variable color.grep.external, which can be used to
switch on coloring of external greps. To enable auto coloring with
GNU grep, one needs to set color.grep.external to --color=always to
defeat the pager started by git grep. The value of the config
variable will be passed to the external grep only if it would
colorize internal grep's output, so automatic terminal detected
works. The default is to not pass any option, because the external
grep command could be a program without color support.
Also set the environment variables GREP_COLOR and GREP_COLORS to
pass the configured color for matches to the external grep. This
works with GNU grep; other variables could be added as needed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring matches makes them easier to spot in the output.
Add two options and two parameters: color.grep (to turn coloring on
or off), color.grep.match (to set the color of matches), --color
and --no-color (to turn coloring on or off, respectively).
The output of external greps is not changed.
This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and
Thiago Alves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following:
- git config value blame.date that expects one of the git log date
formats (e.g. relative,local,default,iso,...);
- git blame command line option --date expects one of the git
log date formats;
- documentation in blame-options.txt;
- git blame uses the appropriate date.c functions and enums to
make sense of the date format and provide appropriate data;
git blame continues to line up the output columns by padding the date
column up to the max width of the chosen date format.
The date format for git blame without both blame.date and --date continues
to be ISO for backwards compatibility.
git annotate ignores the date format specifiers and continues to uses the
ISO format, as before.
Signed-off-by: Eugene Letuchy <eugene@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a comment that the web interface wraps the lines
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are often used together but are too long to type.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --pretty="%h %s" (and --format="%h %s") as shorthand for an often
used option --pretty=tformat:"%h %s".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people prefer to call the pretty-print styles "format", and get
annoyed to see "git log --format=short" fail. Introduce it as a synonym
to --pretty so that both can be used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit url for dcommit is determined in the following order:
commandline option --commit-url
svn.commiturl
svn-remote.<name>.commiturl
svn-remote.<name>.url
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
For deep threading mode, i.e., the mode that gives a thread structured
like
+ [PATCH 0/n] Cover letter
`-+ [PATCH 1/n] First patch
`-+ [PATCH 2/n] Second patch
`-+ ...
we currently have to use 'git send-email --thread' (the default). On
the other hand, format-patch also has a --thread option which gives
shallow mode, i.e.,
+ [PATCH 0/n] Cover letter
|-+ [PATCH 1/n] First patch
|-+ [PATCH 2/n] Second patch
...
To reduce the confusion resulting from having two indentically named
features in different tools giving different results, let format-patch
take an optional argument '--thread=deep' that gives the same output
as 'send-mail --thread'. With no argument, or 'shallow', behave as
before. Also add a configuration variable format.thread with the same
semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about --date, one thing I wanted for the 1234567890 date was to
get things in the raw format. Sure, you get them with --pretty=raw, but it
felt a bit sad that you couldn't just ask for the date in raw format.
So here's a throw-away patch (meaning: I won't be re-sending it, because I
really don't think it's a big deal) to add "--date=raw". It just prints
out the internal raw git format - seconds since epoch plus timezone (put
another way: 'date +"%s %z"' format)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was introduced in 85af7929ee but
not documented outside the commit message.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While b259f09 made git-push output a better error message for 'git-push
--all --tags', this commit fixes the synopsis in the documentation.
Inconsistency spotted and fix suggested by Jari Aalto through
http://bugs.debian.org/502567
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
Many e-mail based development communities require non-flowed text to carry
patches to prevent whitespaces from getting mangled, but there is no easy
way to tell Thunderbird MUA not to use format=flowed, unless you configure
it to do so unconditionally for all outgoing mails.
A workaround for users who use git-imap-send is to wrap the patch in "pre"
element in the draft folder as an HTML message, and tell Thunderbird to
send "text only". Thunderbird turns such a message into a non-flowed
plain text when sending it out, which is what we want for patch e-mails.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a section about how to shrink a repository's size after running
git-filter-branch to remove large blobs from history.
This comes up every week or so on IRC, and the commands required to
handle every case are not very newbie-friendly, so hopefully writing
them down somewhere leads to fewer questions.
It may seem contradictory to document fallbacks for older Gits in
newer docs, but we want to point people at this as a FAQ answer, and
they will frequently not have the newest version installed.
Thanks to Björn Steinbrink and Junio C Hamano for comments and
corrections.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
Since dbc6c74d08, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea was originated by discussion about usability of manually
editing the config file in 'special needs' systems such as Windows. Now
the user can forget a bit about where the config files actually are.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
map_user() allows to lookup and replace both email and
name of a user, based on a new style mailmap file.
The possible mailmap definitions are now:
proper_name <commit_email> # Old style
<proper_email> <commit_email> # New style
proper_name <proper_email> <commit_email> # New style
proper_name <proper_email> commit_name <commit_email> # New style
map_email() operates the same as before, with the
exception that it also will to try to match on a name
passed in through the name return buffer.
clear_mailmap() is needed to now clear the more complex
mailmap structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule update --no-fetch makes it possible to use git submodule
update in complete offline mode by not fetching new revisions.
This does make sense in the following setup:
* There is an unstable and a stable branch in the super/master repository.
* The submodules might be at different revisions in the branches.
* You are at some place without internet connection ;)
With this patch it is now possible to change branches and update
the submodules to be at the recorded revision without online access.
Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update.
Signed-off-by: Fabian Franz <git@fabian-franz.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
Print interaction error messages in color.interactive.error, which
defaults to the value of color.interactive.help.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Term::ReadKey, if available and enabled with interactive.singlekey,
to let the user answer add -p's prompts by pressing a single key. We're
not doing the same in the main 'add -i' interface because file selection
etc. may expect several characters.
Two commands take an argument: 'g' can easily cope since it'll just
offer a choice of chunks. '/' now (unconditionally, even without
readkey) offers a chance to enter a regex if none was given.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the example part of the bundle doucmentation to follow
the suggestion made by Junio during a recent discussion (gmane 108030).
Instead of just showing different ways to create and use bundles in a
disconnected fashion, the rewritten example first shows the simplest
"full cycle" of sneakernet workflow, and then introduces various
variations.
The words are mostly taken from Junio's outline. I only reformatted
them and proofread to make sure the end result flows naturally.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
urls.txt: document optional port specification in git URLS
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
These days you must explicitly say "git stash save <comment>".
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example, Joe Developer has <joe@example.com> as his email,
but in the .mailmap is <joe@random.com>. Use example.com instead.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This functions similarly to "git branch --contains"; it will show all
tags that contain the specified commit, by sharing the same logic.
The patch also adds documentation and tests for the new option.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document suggests to imitate the existing code, but didn't
say which existing code it should imitate. This clarifies.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tries to make the description of ref matching in git push easier
to read. Beauty is in the eye of the beholder, though.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include examples of using HEAD. The order of examples
introduces new concepts one by one. This pushes the
example of deleting a ref to the end of the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec format description was a mix of regexp and BNF, making it
very difficult to read. The format was also wrong: it did not show
that each part of a refspec is optional in different situations.
Rather than having a confusing grammar, just present the format in
informal prose.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the tutorial Alice initializes the repository, and Bob clones it. So
Bob can just do a 'git pull', but Alice will need 'git pull <url>
<branch>'.
The note suggested that the branch parameter is not necessary, which is
no longer true these days.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to ignore the date header field
recorded in the format-patch output. The commits will have the
timestamp when they are created instead.
You can work a lot in one day to accumulate many changes, but
apply and push to the public repository only some of them at
the end of the first day. Then next day you can spend all your
working hours reading comics or chatting with your coworkers,
and apply your remaining patches from the previous day using
this option to pretend that you have been working at the end
of the day.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
Documented --ignore-paths option of git-svn to inform users about
the feature and provide some examples.
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: trailing whitespace removed]
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-describe says the default abbreviation is 8
hexadecimal digits while cache.c clearly shows DEFAULT_ABBREV set to 7.
This patch corrects the documentation.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
* sb/hook-cleanup:
run_hook(): allow more than 9 hook arguments
run_hook(): check the executability of the hook before filling argv
api-run-command.txt: talk about run_hook()
Move run_hook() from builtin-commit.c into run-command.c (libgit)
checkout: don't crash on file checkout before running post-checkout hook
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other config variables use CamelCase. This config variable should
not be an exception.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit c5ee71f (commit: more compact summary and without extra
quotes, 2009-01-19) changed the "git commit" output when creating a
commit. This patch updates the example session in the tutorial to match
the new output.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The <ref> parameter has not been introduced, so rewrite to
avoid it.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "matching refs" semantics works only on matching branches these days.
Instead of using "heads" which traditionally has been used more or less
interchangeably with "refs", say "branch" explicitly here.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment in parentheses is wrong, as one has to leave out both the
colon and <dst>. This situation is covered by the section a few lines
down:
A parameter <ref> without a colon pushes the <ref> from the source
repository to the destination repository under the same name.
So, just remove the parentheses.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from pull-fetch-param.txt and helps the reader
to not get stuck in the URL section.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
Have '-' mean the same as '@{-1}', i.e., the last branch we were on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the description of the -t option in git-mergetool, which
failed to hint that it takes an argument.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path format was inconsistent with the one used in git-notes.sh: it
supposedly split the sha1 in the same 2/38 format that .git/objects
uses, but the code uses the full sha1 without a path separator.
While at it, also fix a grammatical error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well,
2008-12-04) and commits around it, "git am" is equipped to correctly
propagate the command line flags such as -C/-p/-whitespace across a patch
failure and restart.
It is trivial to support --directory option now, resurrecting previous
attempts by Kevin and Simon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the new option depends on --onto and omission of <upstream>, use
a separate invocation style, and omit most options to save space.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_commit_non_empty_tree is added to the functions that can be run from
commit filters. Its effect is to commit only commits actually touching the
tree and that are not merge points either.
The option --prune-empty is added. It defaults the commit-filter to
'git_commit_non_empty_tree "$@"', and can be used with any other
combination of filters, except --commit-hook that must used
'git_commit_non_empty_tree "$@"' where one puts 'git commit-tree "$@"'
usually to achieve the same result.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches Git to produce diff output using the patience diff
algorithm with the diff option '--patience'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make all strbuf functions that can fail free() their memory on error if
they have allocated it. They don't shrink buffers that have been grown,
though.
This allows for easier error handling, as callers only need to call
strbuf_release() if A) the command succeeded or B) if they would have had
to do so anyway because they added something to the strbuf themselves.
Bonus hunk: document strbuf_readlink.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tar handles switches with and witout preceding '-', but the
documentation should be consistent nonetheless.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux kernel and Emacs are both spelled capitalized
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsserver annotates each commit message by "via git-CVS emulator". This is
made configurable via gitcvs.commitmsgannotation.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/mergetool:
mergetool: Don't keep temporary merge files unless told to
mergetool: Add prompt to continue after failing to merge a file
Add -y/--no-prompt option to mergetool
Fix some tab/space inconsistencies in git-mergetool.sh
When there is no grace period before pruning unreferenced objects, it is
pointless to push those objects in their loose form just to delete them
right away.
Also be more explicit about the possibility of using "now" in the
gc.pruneexpire config variable (needed for the above behavior to
happen).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upstream branch <upstream> now defaults to the first tracked
remote branch, which is set by the configuration variables
branch.<name>.remote and branch.<name>.merge of the current branch.
Without such a remote branch, the command "git cherry [-v]" fails with
usage output as before and an additional message.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only incompatible change is that the user how have to use '--'
before a patch file if it is named "--build-fake-ancestor=something".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of listing short option (e.g. "-U<n>") as a shorthand for its
longer counterpart (e.g. "--unified=<n>"), list the synonyms together. It
saves one indirection to find what the reader wants.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable was added in 5f8b9fc (git-send-email: add a new
sendemail.cc configuration variable, 2008-04-27), but is not yet refered
to by the documentation.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"makeinfo" failed to generate gitman.info from gitman.texi input file
because the combined manual page file contains several nodes with the
same name (DESCRIPTION, OPTIONS, SEE ALSO etc.). An Info document should
contain unique node names.
This patch creates a simple (read: ugly) work-around by suppressing the
validation of the final Info file. Jumping to nodes in the Info document
still works but they are not very useful. Common man-page headings like
DESCRIPTION and OPTIONS appear in the Info node list and they point to
the man page where they appear first (that is git-add currently).
Also, this patch adds directory-entry information for Info document to
make the document appear in the top-level Info directory.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously "docbook2x-texi" failed to generate user-manual.texi and
gitman.texi files from .xml input files because "iconv" stopped at
"illegal input sequence" error. This was due to some UTF-8 octets in the
input .xml files. This patch adds option --encoding=UTF-8 for
"docbook2x-texi" to allow the building of .texi files complete.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-send-email.txt: move --format-patch paragraph to a proper location
git-shortlog.txt: improve documentation about .mailmap files
pretty: support multiline subjects with format:
pretty: factor out format_subject()
pretty: factor out skip_empty_lines()
merge-file: handle freopen() failure
daemon: cleanup: factor out xstrdup_tolower()
daemon: cleanup: replace loop with if
daemon: handle freopen() failure
describe: Avoid unnecessary warning when using --all
When introducing --format-patch, its documentation was accidentally inserted
in the middle of documentation for --validate.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description on .mailmap made it seem like they are only useful for
commits with a wrong address for an author, but they are about fixing the
real name. Explain this better in the text, and replace the existing
example with a new one that hopefully makes things clearer.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The straightforward way with using 'cat .git/refs/heads/*' doesn't work
with packed refs as well as branches of the form topic/topic1. So let's
use git-for-each-ref for getting the heads' SHA1s in this example.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The displayed example is typeset with acute accents around the string that
should be surrounded by a pair of single quotes in manpage. Replace them
with double quotes (the semantics of the example does not change).
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and Junio explained issues that are involved in reverting a merge
and how to continue working with a branch that was updated since such a
revert on the mailing list. This is to help new people who did not see
these messages.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: the original patch was against master but 99% of it
applied to maint; this commit splits out the part that
applies only to master.]
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no tagger was found (old Git produced tags like this),
no "tagger" line is printed (but this is incompatible with the current
git fast-import).
Alternatively, you can pass the option --fake-missing-tagger, forcing
fast-export to fake a tagger
Unspecified Tagger <no-tagger>
with a tag date of the beginning of (Unix) time in the case of a missing
tagger, so that fast-import is still able to import the result.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially with something that is supposed to hopefully have some legal
value down the line if somebody starts making noises, it really would be
nice to have a real person to associate things with. Suggest this in the
SubmittingPatches document.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't confuse the user with old git messages.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of the manual writes:
git checkout [options] [<tree-ish>] [--] <paths>...
but the DESCRIPTION says that this form checks the paths out "from the
index, or from a named commit." A later sentence refers to the same
argument as "<tree-ish> argument", but it is not clear that these two
sentences are talking about the same command line argument for first-time
readers.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a freshly initialized repo it is only necessary to rename the .sample
hooks, but when using older repos (initialized with older git init)
enabled the +x mode is still necessary - docuement this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Interrupted workflow" situation is a good example for using
git-stash.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since f98f8cb (Ship sample hooks with .sample suffix, 2008-06-24) hooks
are not enabled by making them executable anymore, but by removing the
'.sample' suffix from the filename.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use '{tilde}' instead of '~', becase the later does not appear in the
manpage version, just in the HTML one.
Noticed by gonzzor on IRC.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now git gui has a customizable Tools menu, so this adds
information about variables that are used to configure it.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes git mergetool to remove the temporary files used to invoke
the merge tool even if it returns non-zero.
This also adds a configuration option (mergetool.keepTemporaries) to
retain the previous behaviour if desired.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit log message for the feature made it sound as if this is a saner
version of --mixed, but the use case presented makes it clear that it is a
better variant of --hard when your changes and somebody else's changes are
mixed together.
Perhaps we would want to rewrite the example that shows the use of --hard
not to talk about recovering from a failed merge?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve some minor language and format issues like hyphenation,
phrases, spacing, word order, comma, attributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears that a reference to an anchor defined as [[anchor-name]] from
another place using <<anchor-name>> syntax, when the anchor name contains
a string "-with-" in its name, triggers these warnings from Python
interpreter.
asciidoc -b docbook -d book user-manual.txt
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
There currently is no reference to "Finding comments with given content",
but for consistency and for futureproofing, the anchor is also updated as
the other ones that are actually used and trigger these warnings.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with asciidoc 8.3.0 linkgit macro is no longer recognized by
asciidoc and user guide suggests
(http://www.methods.co.nz/asciidoc/userguide.html#_macro_definitions)
that macros are supposed to be defined in [macros] section. I'm not
sure whether undefined linkgit macro was working by pure chance or it
is a regression in asciidoc 8.3.0, but this patch adds proper
definition for the linkgit macro, allowing it to work on 8.3.0.
Signed-off-by: Alexey Borzenkov <snaury@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of fixes have been backmerged to 'maint' and are now contained
in 1.6.0.X series as the result, so drop them from this document.
Also contains typofix and duplicate removal pointed out by
Bjørn Lindeijer and Jakub Narebski.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.6.0.5
"git diff <tree>{3,}": do not reverse order of arguments
tag: delete TAG_EDITMSG only on successful tag
gitweb: Make project specific override for 'grep' feature work
http.c: use 'git_config_string' to get 'curl_http_proxy'
fetch-pack: Avoid memcpy() with src==dst
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
This comes from conversation at the GitTogether where we thought it would
be helpful to be able to teach people to 'stage' files because it tends
to cause confusion when told that they have to keep 'add'ing them.
This continues the movement to start referring to the index as a
staging area (eg: the --staged alias to 'git diff'). Also adds a
doc file for 'git stage' that basically points to the docs for
'git add'.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/strbuf-expand:
remove the unused files interpolate.c and interpolate.h
daemon: deglobalize variable 'directory'
daemon: inline fill_in_extra_table_entries()
daemon: use strbuf_expand() instead of interpolate()
merge-recursive: use strbuf_expand() instead of interpolate()
add strbuf_expand_dict_cb(), a helper for simple cases
* ph/send-email:
git send-email: ask less questions when --compose is used.
git send-email: add --annotate option
git send-email: interpret unknown files as revision lists
git send-email: make the message file name more specific.
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new callback function strbuf_expand_dict_cb() can be used together
with strbuf_expand() if there is only a small number of placeholders
for static replacement texts. It expects its dictionary as an array of
placeholder+value pairs as context parameter, terminated by an entry
with the placeholder member set to NULL.
The new helper is intended to aid converting the remaining calls of
interpolate(). strbuf_expand() is smaller, more flexible and can be
used to go faster than interpolate(), so it should replace the latter.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added simple descriptions of these options (based on description of --all).
Signed-off-by: Mark Burton <markb@ordern.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Also add a few links to git-help(1) in "See also" sections.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: git-svn: fix example for centralized SVN clone
Documentation: fix links to "everyday.html"
revision.c: use proper data type in call to sizeof() within xrealloc
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -A option calls pack-objects with the --unpack-unreachable option so
that the unreachable objects in local packs are left in the local object
store loose. But if the -d option to repack was _not_ used, then these
unpacked loose objects are redundant and unnecessary.
Update tests in t7701.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add information on new git-gui and gitk command-line options,
configuration variables, and the encoding attribute.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option lets git mergetool invoke the conflict resolution program
without waiting for a user prompt each time.
Also added a mergetool.prompt (default true) configuration variable
controlling the same behaviour
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can do the lstat() storm in parallel, giving potentially much
improved performance for cold-cache cases or things like NFS that have
weak metadata caching.
Just use "read_cache_preload()" instead of "read_cache()" to force an
optimistic preload of the index stat data. The function takes a
pathspec as its argument, allowing us to preload only the relevant
portion of the index.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement git-pull --quiet and git-pull --verbose by
adding the options to git-pull and fixing verbosity
handling in git-fetch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-keep-pack:
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
* mv/remote-rename:
git-remote: document the migration feature of the rename subcommand
git-remote rename: migrate from remotes/ and branches/
remote: add a new 'origin' variable to the struct
Implement git remote rename
* lt/decorate:
rev-list documentation: clarify the two parts of history simplification
Document "git log --simplify-by-decoration"
Document "git log --source"
revision traversal: '--simplify-by-decoration'
Make '--decorate' set an explicit 'show_decorations' flag
revision: make tree comparison functions take commits rather than trees
Add a 'source' decorator for commits
Conflicts:
Documentation/rev-list-options.txt
