The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes nongit commands like RCS 'merge'. This patch only
italicizes names of commands if they had no formatting before.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To tell command names from options in a glance.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "diff outputs" sounds awkward to my ear (I think
"output" is meant to be used as a substantive noun.)
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent is to make git-commit(1) feel more like a manual page. The
change also makes the page four words shorter.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In listing blocks (set off by rows of dashes), the usual
formatting characters of asciidoc are instead rendered verbatim.
When the escaped double-hyphen of olden days is moved into such a
block along with other formatting improvements, it becomes
backslash-dash-dash.
So we remove the backslash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash save' saves local modifications to a new stash, and runs 'git
reset --hard' to revert them to a clean index and work tree. When the
'--keep-index' option is specified, after that 'git reset --hard' the
previous contents of the index is restored and the work tree is updated
to match the index. This option is useful if the user wants to commit
only parts of his local modifications, but wants to test those parts
before committing.
Also add support for the completion of the new option, and add an
example use case to the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restores the stashed state on a new branch rooted at the commit on which
the stash was originally created, so that conflicts caused by subsequent
changes on the original branch can be dealt with.
(Thanks to Junio for this nice idea.)
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
Adds a new option 'e' to the 'add -p' command loop that lets you edit
the current hunk in your favourite editor.
If the resulting patch applies cleanly, the edited hunk will
immediately be marked for staging. If it does not apply cleanly, you
will be given an opportunity to edit again. If all lines of the hunk
are removed, then the edit is aborted and the hunk is left unchanged.
Applying the changed hunk(s) relies on Johannes Schindelin's new
--recount option for git-apply.
Note that the "real patch" test intentionally uses
(echo e; echo n; echo d) | git add -p
even though the 'n' and 'd' are superfluous at first sight. They
serve to get out of the interaction loop if git add -p wrongly
concludes the patch does not apply.
Many thanks to Jeff King <peff@peff.net> for lots of help and
suggestions.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git apply --root=<root>", all file names in the patch are prepended
with <root>. If a "-p" value was given, the paths are stripped _before_
prepending <root>.
Wished for by HPA.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We saw this explanation repeated on the mailing list a few times. Even
though the description of individual options to particular commands are
explained in their manual pages, the reason behind choosing which is which
has not been clearly explained in any of the documentation.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the dashed forms of git commands not in $(bindir), we have
to change many instances of "git-command" to "git command". Also,
for consistency it is at times appropriate to make the opposite
change. In some cases, the change is not so simple as changing one
character.
This patch gets rid of some of those cases by rewrapping lines.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example inetd.conf lines in git-daemon(1), it was
assumed that `git-daemon` resides in the user's /usr/bin.
With this patch, we only assume `git` is in /usr/bin.
The stronger assumption fails in the default installation
nowadays.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual page for the command invoked as "git clone" is named
git-clone(1), and similarly for the rest of the git commands.
Make sure our first example of this in tutorials makes it clear
that it is the first two words of a command line that make up the
command's name (that is: for example, the effect of "git svn
dcommit" is described in git-svn(1)).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change leading spaces to tabs to match the rest of the file.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/send-email-ssl:
git-send-email: prevent undefined variable warnings if no encryption is set
git-send-email: add support for TLS via Net::SMTP::SSL
For everything other than using "git config" to read or write a
git-style config file that isn't the current repo's config file,
GIT_CONFIG was actively detrimental. Rather than argue over which
programs are important enough to have work anyway, just fix all of
them at the root.
Also removes GIT_LOCAL_CONFIG, which would only be useful for programs
that do want to use global git-specific config, but not the repo's own
git-specific config, and want to use some other, presumably
git-specific config. Despite being documented, I can't find any sign that
it was ever used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-parse manpage introduces the branch@{date} syntax,
and mentions the reflog specifically. However, new users may
not be familiar with the distinction between the reflog and
the commit date, so let's help them out with a "you may be
interested in --until" pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-parse-remote and git-sh-setup are not installed in
$(bindir) anymore, the shell script library won't be found on
user's $PATH in general.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: don't sanitize remote names in config
git-svn: avoid filling up the disk with temp files.
git cat-file: Fix memory leak in batch mode
fix git config example syntax
avoid off-by-one error in run_upload_archive
This removes, from the documentation and the bash completion script, the
two config options that were introduced by the git-whatchanged.sh script
and lost in the C rewrite. Today, we can use aliases as an alternative.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-config expects a space, not '=' between option and value.
Also, quote the value since it contains globs, which some shells will not
pass through unchanged, or will abort if the glob doesn't expand.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes, the easiest way to fix up a patch is to edit it directly, even
adding or deleting lines. Now, many people are not as divine as certain
benevolent dictators as to update the hunk headers correctly at the first
try.
So teach the tool to do it for us.
[jc: with tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a very well established command line convention that old residents
of the git mailing list knew by heart and nobody even thought about
documenting it explicitly, which was not very nice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is desirable to have non-fast-forward branches in a
shared repository. A typical example of that is the 'pu' branch.
This patch extends the format of allowed-users and allow-groups
files by using the '+' sign at the beginning as the mark that
non-fast-forward pushes are permitted to the branch.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Git older than version 1.5.2 (or any other git version with this option
set to 1) may revert to version 1 of the pack index by manually deleting
all .idx files and recreating them using 'git index-pack'. Communication
over the git native protocol is unaffected since the pack index is never
transferred.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.1
fix update-hook-example to work with packed tag references
clone: create intermediate directories of destination repo
for-each-ref: implement missing tag values
git-rebase.sh: Add check if rebase is in progress
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
The update-hook-example used 'test -f' to check the tag present, which
does not work if the checked reference is packed. This check has been
changed to use 'git rev-parse $tag' instead.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Access over the native protocol by old git versions is unaffected as
this capability is negociated by the protocol. Otherwise setting this
config option to "false" and doing a 'git repack -a -d' is enough to
remain compatible with ancient git versions (older than 1.4.4).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to mark hooks we ship as samples by making them unexecutable, but
some filesystems cannot tell what is executable and what is not.
This makes it much more explicit. The hooks are suffixed with .sample
(but now are made executable), so enabling it is still one step operation
(instead of "chmod +x $hook", you would do "mv $hook.sample $hook") but
now they won't get accidentally enabled on systems without executable bit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Extend parse-options test suite
api-parse-options.txt: Introduce documentation for parse options API
parse-options.c: fix documentation syntax of optional arguments
api-builtin.txt: update and fix typo
Add some documentation of basics, macros and callback
implementation of the parse-options API.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention NEED_WORK_TREE flag and command-list.txt.
Fix "bulit-in" typo and AsciiDoc-formatting of a paragraph.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option behaves more like:
git push $url +refs/*:refs/*
than it does like:
git push $url +refs/heads/*:refs/heads/* +refs/tags/*:refs/tags/*
so we should document it to be more clear about that.
Suggested-by: Marek Zawirski <marek.zawirski@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script appp.sh can be used with the External Editor extension for
Mozilla Thunderbird in order to be able to send inline patches in an
easy way.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a misplaced list block separator, general hints about the config
file options got indented at the same level as the description of the last
option, making it easy to miss them.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the --import-marks and --export-marks to fast-export. These import
and export the marks used to for all revisions exported in a similar fashion
to what fast-import does. The format is the same as fast-import, so you can
create a bidirectional importer / exporter by using the same marks file on
both sides.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in the documentation[*] this is totally useless on
filesystems that do ordered/journalled data writes, but it can be a
useful safety feature on filesystems like HFS+ that only journal the
metadata, not the actual file contents.
It defaults to off, although we could presumably in theory some day
auto-enable it on a per-filesystem basis.
[*] Yes, I updated the docs for the thing. Hell really _has_ frozen
over, and the four horsemen are probably just beyond the horizon.
EVERYBODY PANIC!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When initializing the struct async and struct child_process structures,
the documentation suggested "clearing" the structure with '0' instead of
'\0'. It is enough to use integer zero here.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because we are now bisecting using a detached HEAD.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* om/remote-fix:
"remote prune": be quiet when there is nothing to prune
remote show: list tracked remote branches with -n
remote prune: print the list of pruned branches
builtin-remote: split show_or_prune() in two separate functions
remote show: fix the -n option
Higher stages store the blobs involved from their side verbatim. Removal
of uninteresting hunks are done by "diff --cc" upon demand and not stored
in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already had a hack to exclude @pxref{[URLS]} from the texi stream that
refers to nonexistent anchor.
This allows "make info" to produce gitman.info again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other manual pages (e.g. git-blame.txt), this used *NOTE:*
to show a side note headed with boldface string "NOTE". Use a paragraph
headed by [NOTE] like others instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without [verse], the line break between the two synopsis lines does
not make it into the man page.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also split the "-c or -C <commit>" item into two separate items.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes the SYNOPSIS in git-commit.txt:
* --amend could be used in conjunction with -c/-C/-F/-m;
it is not mutually exclusive with them.
* -m and -F are not alternative options to -c/-C;
you can reuse authorship from a commit (-c/-C)
but change the message (-m/-F).
Furthermore, for long-option consistency --author <author>
is changed to --author=<author>.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrapped synopsis and removed wrong asterisk behind --count option;
clarified --sort=<key> description for multiple keys; documented that
for-each-ref supports not only glob patterns but also prefixes like
"refs/heads" as patterns, and that multiple patterns can be given.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All functions in strbuf.h are documented, except launch_editor().
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log family and git-rev-list share the same set of options that come
from revision walking machinery, but they both have options unique to
them. Notably, --header, --timestamp, --stdin and --quiet apply only to
rev-list. Exclude them from the git-log documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving the old sha1 is already optional when changing a ref, and it's
quite handy when running update-ref manually. So make it optional for
deleting a ref too.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old description was misleading and logically impossible. It claimed that
the ancestors of the original commit would be re-written to have the multiple
emitted ids as parents. Not only would this modify existing objects, but it
would create a cycle. What this actually does is pass the multiple emitted ids
to the newly-created children to use as parents.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They now point to more specific/appropriate targets.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
core-tutorial.txt -> gitcore-tutorial.txt
glossary.txt -> gitglossary.txt
But as the glossary is included in the user manual and as the new
gitglossary man page cannot be included as a whole in the user manual,
the actual glossary content is now in its own "glossary-content.txt"
new file. And this file is included by both the user manual and the
gitglossary man page.
Other documents that reference the above ones are changed accordingly
and sometimes improved a little too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with multiple branches in an svn repository, it can be
useful to verify the svn repository and local tracking branch that will
be used for the rebase operation.
Signed-off-by: Seth Falcon <seth@userprimary.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alter the description of <repository> in OPTIONS section to
explicitly state that a 'remote name' is accepted.
Rewrite REMOTES section to more directly identify the
different kinds of remote-name permitted.
Signed-off-by: John J. Franey <jjfraney@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately the list is not complete, but includes the essential ones.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous documentation didn't make it clear that the
"assume unchanged" was on per file basis, and not a global
flag.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).
This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.
[jc: rewrote the log message and added test]
Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Geoffrey Irving noticed that git-cherry talks about comparing commits without
hinting how they are compared.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <git-rev-list args> are mandatory to git bundle create, not
optional. The usage output of git bundle is already right on this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
Preformatted html and man pages show a mangled graph, caused by a
backslash.
Commit f1ec6b22a8 fixed this same issue,
but it seems that new versions of the Asciidoc toolchain changed their
behaviour.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* as/graph:
get_revision(): honor the topo_order flag for boundary commits
Fix output of "git log --graph --boundary"
log --graph --left-right: show left/right information in place of '*'
graph API: don't print branch lines for uninteresting merge parents
graph API: fix graph mis-alignment after uninteresting commits
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
* js/cvsexportcommit:
cvsexportcommit: introduce -W for shared working trees (between Git and CVS)
cvsexportcommit: chomp only removes trailing whitespace
Conflicts:
git-cvsexportcommit.perl
* js/ignore-submodule:
Ignore dirty submodule states during rebase and stash
Teach update-index about --ignore-submodules
diff options: Introduce --ignore-submodules
* mo/cvsserver:
Documentation: Fix skipped section level
git-cvsserver: add ability to guess -kb from contents
implement gitcvs.usecrlfattr
git-cvsserver: add mechanism for managing working tree and current directory
With the --graph option, the graph already outputs 'o' instead of '*'
for boundary commits. Make it emit '<' or '>' when --left-right is
specified.
(This change also disables the '^' prefix for UNINTERESTING commits.
The graph code currently doesn't print anything special for these
commits, since it assumes no UNINTERESTING, non-BOUNDARY commits are
displayed. This is potentially a bug if UNINTERESTING non-BOUNDARY
commits can actually be displayed via some code path.)
[jc: squashed the left-right change from Dscho and Adam's fixup into one]
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man page format:
cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt -> gittutorial.txt
tutorial-2.txt -> gittutorial-2.txt
These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.
[jc: with help from Nanako to clean things up]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being able to say "git diff A B" outside a git repository and getting a
colourful version of "diff -u A B" may be nice, but such a cute hack
should not give bogus results to scripts that want to give two paths,
either or both of which happen to have been removed from the work tree,
to "git diff-files".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/repack:
Documentation/git-repack.txt: document new -A behaviour
let pack-objects do the writing of unreachable objects as loose objects
add a force_object_loose() function
builtin-gc.c: deprecate --prune, it now really has no effect
git-gc: always use -A when manually repacking
repack: modify behavior of -A option to leave unreferenced objects unpacked
Conflicts:
builtin-pack-objects.c
* maint:
rev-parse --symbolic-full-name: don't print '^' if SHA1 is not a ref
Add missing "short" alternative to --date in rev-list-options.txt
git-show.txt: Not very stubby these days.
Clarify repack -n documentation
log.date config variable sets the default date-time mode for the log
command. Setting log.date value is similar to using git log's --date
option.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides additional warning to users when attempting to
commit to a detached HEAD. It is configurable in color.status.nobranch.
Signed-off-by: Chris Parsons <chris@edendevelopment.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While repacking a local repository a coworker thought the -n option
was necessary to git-repack to keep it from updating some unknown
file on the central server we all share. Explaining further what
the option is (not) doing helps to make it clear the option does
not impact any remote repositories the user may have configured.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With xmlto 0.0.18 it seems to demand that no section levels are
skipped. The commit 'implement gitcvs.usecrlfattr' (8a06a63297)
one such skip, which here is removed by increasing the level of the
offender.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
For a given project the directory used with the -w option is almost always
the same each time. Let it be specified with 'cvsexportcommit.cvsdir' so
it's not necessary to manually add it with -w each time.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-daemon upload-archive feature has always used the
config directive 'daemon.uploadarch'; the documentation
which came later seems to have just mistakenly used the
wrong name.
Noticed by lionel@over-blog.com.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add paragraph for the -A option, and describe the new behaviour
that makes unreachable objects loose.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "brower.konqueror.path" to "browser.konqueror.path" in
documentation.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult
the "crlf" for each file to determine if it should mark the file
as binary (-kb).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a CVS checkout, it is easy to import the CVS history by
calling "git cvsimport". However, interacting with the CVS repository
using "git cvsexportcommit" was cumbersome, since that script assumes
separate working directories for Git and CVS.
Now, you can call cvsexportcommit with the -W option. This will
automatically discover the GIT_DIR, and it will check out the parent
commit before exporting the commit.
The intended workflow is this:
$ CVSROOT=$URL cvs co module
$ cd module
$ git cvsimport
hack, hack, hack, making two commits, cleaning them up using rebase -i.
$ git cvsexportcommit -W -c -p -u HEAD^
$ git cvsexportcommit -W -c -p -u HEAD
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like with the diff machinery, update-index should sometimes just
ignore submodules (e.g. to determine a clean state before a rebase).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option --ignore-submodules can now be used to ignore changes in
submodules.
Why? Sometimes it is not interesting when a submodule changed.
For example, when reordering some commits in the superproject, a dirty
submodule is usually totally uninteresting. So we will use this option
in git-rebase to test for a dirty working tree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarifies the git-prune man page, documenting that it only
prunes unpacked objects.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/format-cc:
Add tests for sendemail.cc configuration variable
git-send-email: add a new sendemail.cc configuration variable
git-format-patch: add a new format.cc configuration variable
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option --no-binary to git-format-patch so that no binary
changes are included in the generated patches, only notices that those
files changed. This generate patches that cannot be applied, but still
is useful for generating mails for code review purposes.
See also: commit e47f306d4b, where --binary
option was turned on by default.
Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/help:
documentation: web--browse: add a note about konqueror
documentation: help: add info about "man.<tool>.cmd" config var
help: use "man.<tool>.cmd" as custom man viewer command
documentation: help: add "man.<tool>.path" config variable
help: use man viewer path from "man.<tool>.path" config var
The "-u" option is described only in terms of "updating"
files, which in turn is described only as "similar to what
git commit -a does". Let's be a little more specific about
what updating entails.
Suggested by Geoffrey Irving.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, there were no "git bisect run" example.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git gui' has a number of options that can be specified using the
options dialog. Sometimes it is convenient to be able to specify these
from the command line, therefor document these options.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Shawn O. Pearce <speace@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch in "git-add.txt" and "git-format-patch.txt", the
commands used in the examples were "git-CMD" instead of "git CMD".
This patch fixes that.
In "git-pull.txt" only the last example had the code sample in an
asciidoc "Listing Block", and in the other two files, none.
This patch fixes that by putting all code samples in listing
blocks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--batch is similar to --batch-check, except that the contents of each object is
also printed. The output's form is:
<sha1> SP <type> SP <size> LF
<contents> LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows multiple objects to be specified on stdin. For each
object specified, a line of the following form is printed:
<sha1> SP <type> SP <size> LF
If the object does not exist in the repository, a line of the following form is
printed:
<object> SP missing LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
* lh/branch-merged:
Add tests for `branch --[no-]merged`
git-branch.txt: compare --contains, --merged and --no-merged
git-branch: add support for --merged and --no-merged
This new option causes a text-based representation of the history to be
printed to the left of the normal output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new API allows the commit history to be displayed as a text-based
graphical representation.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of rename limiting is to bound the amount of time
we spend figuring out inexact renames. Currently we use a
single value, diff.renamelimit, for all situations. However,
it is probably the case that a user is willing to spend more
time finding renames during a merge than they are while
looking at git-log.
This patch provides a way of setting those values separately
(though for backwards compatibility, merge still falls back
on the diff renamelimit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most users should be using git-gc instead of directly
calling prune. For those who really do want more information
on pruning, let's point them at git-fsck, which goes into
slightly more detail on reachability.
And since we're pointing users there, let's make sure
reflogs are mentioned in git-fsck(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to always CC patches to a given mailing list. In
these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "git rev-parse --verify <something>" is often used with
its error output redirected to /dev/null. This patch makes it
easier to do that.
The -q|--quiet option is designed to work the same way as it does
for "git symbolic-ref".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This note explains how to work around the fact that we try to use
kfmclient to launch konqueror.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also describes the current behavior for "konqueror" and
how to modify it using "man.<tool>.cmd" if needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch documents the "man.<tool>.path" configuration
variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I often find myself pulling patches off of other peoples trees using
cherry-pick, and following it with an immediate 'git commit --amend -s'
command. Eliminate the need for a double commit by allowing signoff on a
cherry-pick or revert.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote: create fetch config lines with '+'
push: allow unqualified dest refspecs to DWIM
doc/git-gc: add a note about what is collected
t5516: remove ambiguity test (1)
Linked glossary from cvs-migration page
write-tree: properly detect failure to write tree objects
It seems to be a FAQ that people try running git-gc, and
then get puzzled about why the size of their .git directory
didn't change. This note mentions the reasons why things
might unexpectedly get kept.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coming from CVS, I found the git glossary vital to learning git and learning
how terms in git correlate to the cvs terminology with which I am familiar.
This patch links the glossary from the cvs-migration page so cvs users will
be able to fine the glossary as soon as they start looking at git documents.
Signed-off-by: Matt Graham <mdg149@gmail.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Amend git-push refspec documentation
git-gc --prune is deprecated
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
Don't force imap.host to be set when imap.tunnel is set
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
These paragraphs are a little confusing. Also, make it clearer when
you have to specify the full name for <dst>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
25ee9731c1 made the '--prune' option
deprecated and removed its description from the git-gc man page. This
patch removes all references to this option from the rest of the Git
documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff --name-status outputs letters, but the meaning of those letters
is documented elsewhere. Add a note to make the manpage more intuitive.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-gc now always calls prune, even with --auto, unreferenced objects
may be removed by more operations than just git-gc. This is important for
clones created using --shared or --reference.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: fix accidental removal of a trailing space in signature line
Escape project names before creating pathinfo URLs
Escape project name in regexp
bash: Add completion for git diff --base --ours --theirs
diff-options.txt: document the new "--dirstat" option
This commit adds the documentation for the new option added by 7df7c01
(Add "--dirstat" for some directory statistics, 2008-02-12).
Noticed by Clint Adams, reported through
http://bugs.debian.org/476437
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options filter the output from git branch to only include branches
whose tip is either merged or not merged into HEAD.
The use-case for these options is when working with integration of branches
from many remotes: `git branch --no-merged -a` will show a nice list of merge
candidates while `git branch --merged -a` will show the progress of your
integration work.
Also, a plain `git branch --merged` is a quick way to find local branches
which you might want to delete.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Fix 'history' view for deleted files with history
Document that WebDAV doesn't need git on the server, and works over SSL
git-remote: reject adding remotes with invalid names
am: POSIX portability fix
I managed to set up a Git repository on a preconfigured WebDAV server,
and using HTTPS, without installing Git on it or changing the server
configuration. This works through a proxy too. This patch reflects
this (it previously stated that Git was _necessary_ on the server,
which isn't true). Also give a few hints to troubleshoting.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do some verb-noun agreement changes.
Clarify some file globbing cases.
Fixed a wrong statement in an example.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
For SSH clients restricted to git-shell, CVS_SERVER does not have to be
specified, because git-shell understands the default value of 'cvs' to
mean git-cvsserver'. This makes it totally transparent to CVS users, but
the instruction to set up CVS access for people with real shell access
does not apply.
Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was
unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc.
Note that the .ssh/environment file is a good place to set these, and that
the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d
(setting CVSROOT) from cvs co -d (setting the name of the newly checked
out directory). Removed an extra 'Example:' string.
Signed-off-by: Scott Collins <scc@ScottCollins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches 'git commit/status' show a new 'Modified submodules'
section, which is an output from:
git submodule summary --cached --for-status --summary-limit <limit>
just before the 'Untracked files' section.
The <limit> is given by the config variable status.submodulesummary
to limit the submodule summary size. status.submodulesummary is a
bool/int variable with value:
- false or 0 by default to disable the summary, or
- positive number to limit the summary size, or
- true or negative number to unlimit the summary size.
Also mention status.submodulesummary in the documentation.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the command line option equivalents of the 'merge.log' config
variable.
The patch also updates documentation and bash completion accordingly, and
adds a test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are new synonyms to the '--(no-)summary' option and the
'merge.summary' config variable, but are consistent with the soon to be
added 'merge --(no-)log' options. The 'merge.summary' config variable and
'--(no-)summary' options are still accepted, but are advertised to be
removed in the future.
'merge.log' takes precedence over 'merge.summary' if they are both set
inconsistently.
Update documentation and tests accordingly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable has the same effect, as 'merge.diffstat'.
Also mention it in the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option has the same effect as '--(no-)summary' (i.e. whether to
show a diffsat at the end of the merge or not), and it is consistent
with the '--stat' option of other git commands.
Documentation, tests, and bash completion are updaed accordingly, and the
old --summary option is marked as being deprected.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the new file from config.txt and git-merge.txt.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
git-submodule: Avoid 'fatal: cannot describe' message
Force the medium pretty format on calls to git log
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Users are not often aware of the fact that "git bisect -h" can give
them a long usage description, as "git bisect" seems to accept only
dashless subcommands like "start", "good", ...
That's why this patch adds a "git bisect help" subcommand that just
calls "git bisect -h". This new subcommand is also fully documented
in the short usage string (that "git bisect" gives), in the long
usage string and in the man page (that "git help bisect" gives).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tagger is equal to the committer, not the author, so
GIT_COMMITTER_DATE is the right environment variable to use, not
GIT_AUTHOR_DATE.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-fetch: fix status output when not storing tracking ref
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
* maint-1.5.4:
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
The --root option from "git diff-tree" won't do nothing
when is given to commands like git-whatchanged or git-log,
because those always print the initial commit by default.
This fixes the tutorial explaining the function of the
log.showroot configuration variable.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an argument for an option is optional, like in -n from git-tag,
puting a space between the option and the argument is interpreted
as a missing argument for the option plus an isolated argument.
Documentation now reflects the need to write the parameter following
the option -n, as in "git tag -nARG", for instance.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/unpack-careful:
t5300: add test for "index-pack --strict"
receive-pack: allow using --strict mode for unpacking objects
unpack-objects: fix --strict handling
t5300: add test for "unpack-objects --strict"
unpack-objects: prevent writing of inconsistent objects
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a bit confusing on first read, that
"The packed archive format (.pack) is designed
to be unpackable..."
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rate of fixes that trickle in has slowed and we are definitely
getting there. Hopefully one final round and we will have the final
1.5.5 soon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode does not work with files whose names contain
characters that need C-quoting. `core.quotepath` configuration can be
used to work this limitation around to some degree, but backslash,
double-quote and control characters will still have problems.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for creating a new tag object and retaining the tag message,
author, and date when rewriting tags. The gpg signature, if one exists,
will be stripped.
This adds nearly proper tag name filtering to filter-branch. Proper tag
name filtering would include the ability to change the tagger, tag date,
tag message, and _not_ strip a gpg signature if the tag did not change.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a gitcvs.dbtablenameprefix config variable, the contents of which
are prepended to any database tables names used by git-cvsserver. The
same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and
any non-alphabetic characters are replaced with underscores.
A typo found in contrib/completion/git-completion.bash is also fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Conflicts:
t/t3800-mktag.sh
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(cherry picked from commit 0c829391cf)
For a while now, git-checkout has been more powerful than the man-page
summary would suggest (the main text does describe the new features),
so update the summary to hopefully better reflect the current
functionality. Also update the glossary description of the word checkout.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout and branch recently learnt to track local branches when
branch.autosetupmerge = always, but they _also_ learnt to do that when
asked explicitely with the option "--track".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a %xXX format which inserts two hexdigits after %x as a byte
value in the resulting string. This can be used to add a NUL byte or any
other byte that can make machine parsing easier. It is also necessary to
use fwrite to print out the data since printf will terminate if you feed
it a NUL.
Signed-off-by: Govind Salinas <blix@sophiasuchtig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent discussion on the list, with the improvement f7c22cc (always start
looking up objects in the last used pack first, 2007-05-30) brought in,
reached the concensus that the current default 20 is too low.
Reference: http://thread.gmane.org/gmane.comp.version-control.git/77586
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import documentation currently does not document the behaviour
of "merge" when there is no "from" in a commit. This patch adds a
description of what happens: the commit is created with a parent, but
no files. This behaviour is equivalent to "from" followed by
"filedeleteall".
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add sendemail.smtpserverport to the Configuration section
of the git-send-email manpage. It should probably be
referenced in the --smtp-server-port option as well.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a direct hint to those who feel highly annoyed by the auto gc
behavior.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was already some documentation about subtree under
Documentation/howto but it was missing from git-merge manpage.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
Tell xmlto to repress printing of the lines:
Note: meta date : No date. Using generated date git-xyx
Note: Writing git-xyz.1
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
merge-file: handle empty files gracefully
merge-recursive: handle file mode changes
Minor wording changes in the keyboard descriptions in git-add --interactive.
git fetch: Take '-n' to mean '--no-tags'
quiltimport: fix misquoting of parsed -p<num> parameter
git-quiltimport: better parser to grok "enhanced" series files.
The wording of the interactive help text from git-add--interactive.perl is
clearer. Just duplicate that text here.
Signed-off-by: Vineet Kumar <vineet@doorstop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only reason we did not call "prune" in git-gc was that it is an
inherently dangerous operation: if there is a commit going on, you will
prune loose objects that were just created, and are, in fact, needed by the
commit object just about to be created.
Since it is dangerous, we told users so. That led to many users not even
daring to run it when it was actually safe. Besides, they are users, and
should not have to remember such details as when to call git-gc with
--prune, or to call git-prune directly.
Of course, the consequence was that "git gc --auto" gets triggered much
more often than we would like, since unreferenced loose objects (such as
left-overs from a rebase or a reset --hard) were never pruned.
Alas, git-prune recently learnt the option --expire <minimum-age>, which
makes it a much safer operation. This allows us to call prune from git-gc,
with a grace period of 2 weeks for the unreferenced loose objects (this
value was determined in a discussion on the git list as a safe one).
If you want to override this grace period, just set the config variable
gc.pruneExpire to a different value; an example would be
[gc]
pruneExpire = 6.months.ago
or even "never", if you feel really paranoid.
Note that this new behaviour makes "--prune" be a no-op.
While adding a test to t5304-prune.sh (since it really tests the implicit
call to "prune"), also the original test for "prune --expire" was moved
there from t1410-reflog.sh, where it did not belong.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Also add titles to paragraphs under "CONFIGURATION VARIABLES".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being in the project's top directory when starting or continuing a rebase
is not necessary since 533b703 (Allow whole-tree operations to be started
from a subdirectory, 2007-01-12).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might eventually be loosening this rule, but there is a longstanding
restriction that the users currently need to be aware of.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt:
parse-options: new option type to treat an option-like parameter as an argument.
parse-opt: bring PARSE_OPT_HIDDEN and NONEG to git-rev-parse --parseopt
* sp/fetch-optim:
Teach git-fetch to exploit server side automatic tag following
Teach fetch-pack/upload-pack about --include-tag
git-pack-objects: Automatically pack annotated tags if object was packed
Teach git-fetch to grab a tag at the same time as a commit
Make git-fetch follow tags we already have objects for sooner
Teach upload-pack to log the received need lines to an fd
Free the path_lists used to find non-local tags in git-fetch
Allow builtin-fetch's find_non_local_tags to append onto a list
Ensure tail pointer gets setup correctly when we fetch HEAD only
Remove unnecessary delaying of free_refs(ref_map) in builtin-fetch
Remove unused variable in builtin-fetch find_non_local_tags
* maint:
GIT 1.5.4.4
ident.c: reword error message when the user name cannot be determined
Fix dcommit, rebase when rewriteRoot is in use
Really make the LF after reset in fast-import optional
The configuration variables for custom merge tools were documented
only in config.txt but there was no reference to the functionality in
git-mergetool.txt.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
unquote_c_style: fix off-by-one.
test-lib: fix TERM to dumb for test repeatability
config.txt: refer to --upload-pack and --receive-pack instead of --exec
git-gui: Gracefully fall back to po2msg.sh if msgfmt --tcl fails
* js/reflog-delete:
t3903-stash.sh: Add tests for new stash commands drop and pop
git-reflog.txt: Document new commands --updateref and --rewrite
t3903-stash.sh: Add missing '&&' to body of testcase
git-stash: add new 'pop' subcommand
git-stash: add new 'drop' subcommand
git-reflog: add option --updateref to write the last reflog sha1 into the ref
refs.c: make close_ref() and commit_ref() non-static
git-reflog: add option --rewrite to update reflog entries while expiring
reflog-delete: parse standard reflog options
builtin-reflog.c: fix typo that accesses an unset variable
Teach "git reflog" a subcommand to delete single entries
* cb/mergetool:
Add a very basic test script for git mergetool
Teach git mergetool to use custom commands defined at config time
Changed an internal variable of mergetool to support custom commands
Tidy up git mergetool's backup file behaviour
The options --upload-pack (of git-fetch-pack) and --receive-pack (of
git-push) do the same as --exec (for both commands). But the former options
have the more descriptive name.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in the top-level project, it is useful to create a new
submodule as a git repo in a subdirectory, then add that submodule to
the top-level in place.
This patch allows "git submodule add <intended url> subdir" to add the
existing subdir to the current project. The presumption is the user will
later push / clone the subdir to the <intended url> so that future
submodule init / updates will work.
Absent this patch, "git submodule add" insists upon cloning the subdir
from a repository at the given url, which is fine for adding an existing
project in, but less useful when adding a new submodule from scratch to an
existing project. The former functionality remains, and the clone is
attempted if the subdir does not already exist as a valid git repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, in the 'start_command' function after forking
we now take care of stderr in the child process before stdout.
This way if 'start_command' is called with a 'child_process'
argument like this:
.err = -1;
.stdout_to_stderr = 1;
then stderr will be redirected to a pipe before stdout is
redirected to stderr. So we can now get the process' stdout
from the pipe (as well as its stderr).
Earlier such a call would have redirected stdout to stderr
before stderr was itself redirected, and therefore stdout
would not have followed stderr, which would not have been
very useful anyway.
Update documentation in 'api-run-command.txt' accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git mergetool is restricted to a set of commands defined
in the script. You can subvert the mergetool.<tool>.path to force
git mergetool to use a different command, but if you have a command
whose invocation syntax does not match one of the current tools then
you would have to write a wrapper script for it.
This patch adds two git config variable patterns which allow a more
flexible choice of merge tool.
If you run git mergetool with -t/--tool or the merge.tool config
variable set to an unrecognized tool then git mergetool will query the
mergetool.<tool>.cmd config variable. If this variable exists, then git
mergetool will treat the specified tool as a custom command and will use
a shell eval to run the command with the documented shell variables set.
mergetool.<tool>.trustExitCode can be used to indicate that the exit
code of the custom command can be used to determine the success of the
merge.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently a backup pre-merge file with conflict markers is sometimes
kept with a .orig extenstion and sometimes removed depending on the
particular merge tool used.
This patch makes the handling consistent across all merge tools and
configurable via a new mergetool.keepBackup config variable
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running log/show/whatchanged from the command line, the user may
want to use a preferred format without having to pass --pretty=<fmt>
option every time from the command line. This teaches these three
commands to honor a new configuration variable, format.pretty.
The --pretty option given from the command line will override the
configured format.
The earlier patch fixed the in-tree callers that run these commands
for purposes other than showing the output directly to the end user
(the only other in-tree caller is "git bisect visualize", whose output
directly goes to the end user and should be affected by this patch).
Similar fixes will be needed for end-user scripts that parse the
output from these commands and expect them to be in the default pretty
format.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation had its own description for --pretty and did not
include pretty-options/formats as documentation for other commands in
the "log" family did.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a configuration variable receive.fsckobjects is set,
receive-pack runs unpack-objects with --strict mode to check all
received objects.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a strict mode, which ensures that:
- no malformed object will be written
- no object with broken links will be written
The patch ensures this by delaying the write of all non blob object.
These object are written, after all objects they link to are written.
An error can only result in unreferenced objects.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been supported for a long time, but I do not think this feature has
been in use in the real world at all. We would eventually move this out
of the toplevel of the work tree and to somewhere under $GIT_DIR, so let's
remove the command line option to specify the location now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new protocol extension "include-tag" allows the client side
of the connection (fetch-pack) to request that the server side of the
native git protocol (upload-pack / pack-objects) use --include-tag
as it prepares the packfile, thus ensuring that an annotated tag object
will be included in the resulting packfile if the object it refers to
was also included into the packfile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option "--include-tag" allows the caller to request that
any annotated tag be included into the packfile if the object the tag
references was also included as part of the packfile.
This option can be useful on the server side of a native git transport,
where the server knows what commits it is including into a packfile to
update the client. If new annotated tags have been introduced then we
can also include them in the packfile, saving the client from needing
to request them through a second connection.
This change only introduces the backend option and provides a test.
Protocol extensions to make this useful in fetch-pack/upload-pack
are still necessary to activate the logic during transport.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix 'git remote show' regression on empty repository in 1.5.4
Fix incorrect wording in git-merge.txt.
git-merge.sh: better handling of combined --squash,--no-ff,--no-commit options
Fix random crashes in http_cleanup()
A merge is not necessarily with a remote branch, it can be with any
commit.
Thanks to Paolo Ciarrocchi for pointing out the problem, and to
Nicolas Pitre for pointing out the fact that a merge is not
necessarily with a branch head.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit '74359821': (128 commits)
tests: introduce test_must_fail
Fix builtin checkout crashing when given an invalid path
templates/Makefile: don't depend on local umask setting
Correct name of diff_flush() in API documentation
Start preparing for 1.5.4.4
format-patch: remove a leftover debugging message
completion: support format-patch's --cover-letter option
Eliminate confusing "won't bisect on seeked tree" failure
builtin-reflog.c: don't install new reflog on write failure
send-email: fix In-Reply-To regression
git-svn: Don't prompt for client cert password everytime.
git.el: Do not display empty directories.
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
Add testcase for 'git cvsexportcommit -w $cvsdir ...' with relative $GIT_DIR
Prompt to continue when editing during rebase --interactive
Documentation/git svn log: add a note about timezones.
git-p4: Support usage of perforce client spec
git-p4: git-p4 submit cleanups.
git-p4: Removed git-p4 submit --direct.
git-p4: Clean up git-p4 submit's log message handling.
...
* maint:
Update draft release notes for 1.5.4.4
revert: actually check for a dirty index
tests: introduce test_must_fail
git-submodule: Fix typo 'url' which should be '$url'
receive-pack: Initialize PATH to include exec-dir.
Conflicts:
builtin-revert.c
* np/verify-pack:
add storage size output to 'git verify-pack -v'
fix unimplemented packed_object_info_detail() features
make verify_one_pack() a bit less wrong wrt packed_git structure
factorize revindex code out of builtin-pack-objects.c
Conflicts:
Makefile
* pb/cvsimport:
cvsimport: document that -M can be used multiple times
cvsimport: allow for multiple -M options
cvsimport: have default merge regex allow for dashes in the branch name
* mk/maint-parse-careful:
receive-pack: use strict mode for unpacking objects
index-pack: introduce checking mode
unpack-objects: prevent writing of inconsistent objects
unpack-object: cache for non written objects
add common fsck error printing function
builtin-fsck: move common object checking code to fsck.c
builtin-fsck: reports missing parent commits
Remove unused object-ref code
builtin-fsck: move away from object-refs to fsck_walk
add generic, type aware object chain walker
Conflicts:
Makefile
builtin-fsck.c
The --max-age=<timestamp> and --min-age=<timestamp> are now shown only
in the git-rev-list manpage (plumbing).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our scripts try to stick to fairly limited subset of POSIX BRE for
portability. It is unclear from manual page from GNU grep which is GNU
extension and which is portable, so let's spell it out to help new people
to keep their contributions from hurting porters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can possibly break external scripts that depend on the previous
output, but those script can't possibly be critical to Git usage, and
fixing them should be trivial.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also document the capture behaviour (source branch name in $1)
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation cherry-pick: Fix cut-and-paste error
git.el: find the git-status buffer whatever its name is
git-gui: Paper bag fix info dialog when no files are staged at commit
These flags are already known to rev-parse and have the same meaning.
This patch allows to run gitk as follows:
gitk --branches --not --remotes
to show only your local work.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
templates/Makefile: don't depend on local umask setting
Correct name of diff_flush() in API documentation
Start preparing for 1.5.4.4
Conflicts:
RelNotes
Adds strict option, which bails out if the pack would
introduces broken object or links in the repository.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a strict mode, which ensures that:
- no malformed object will be written
- no object with broken links will be written
The patch ensures this by delaying the write of all non blob object.
These object are written, after all objects they link to are written.
An error can only result in unreferenced objects.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Eliminate confusing "won't bisect on seeked tree" failure
builtin-reflog.c: don't install new reflog on write failure
send-email: fix In-Reply-To regression
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
Add testcase for 'git cvsexportcommit -w $cvsdir ...' with relative $GIT_DIR
Prompt to continue when editing during rebase --interactive
Documentation/git svn log: add a note about timezones.
Don't use GIT_CONFIG in t5505-remote
Conflicts:
t/t9001-send-email.sh
t/t9200-git-cvsexportcommit.sh
* db/cover-letter:
Improve collection of information for format-patch --cover-letter
Add API access to shortlog
t4014: Replace sed's non-standard 'Q' by standard 'q'
Support a --cc=<email> option in format-patch
Combine To: and Cc: headers
Fix format.headers not ending with a newline
Add tests for extra headers in format-patch
Add a --cover-letter option to format-patch
Export some email and pretty-printing functions
Improve message-id generation flow control for format-patch
Add more tests for format-patch
Conflicts:
builtin-log.c
builtin-shortlog.c
pretty.c
* ae/pack-autothread:
Revert "pack-objects: Print a message describing the number of threads for packing"
pack-objects: Print a message describing the number of threads for packing
pack-objects: Add runtime detection of online CPU's
* sp/describe:
Use git-describe --exact-match in bash prompt on detached HEAD
Teach git-describe --exact-match to avoid expensive tag searches
Avoid accessing non-tag refs in git-describe unless --all is requested
Teach git-describe to use peeled ref information when scanning tags
Optimize peel_ref for the current ref of a for_each_ref callback
git svn log mimics the timezone converting behaviour of svn log, but
this was undocumented.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for -F | --fixed-strings option to "git log --grep"
and friends: "git log --author", "git log --committer=<pattern>".
Code is based on implementation of this option in "git grep".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest
timezone_names[]: fixed the tz offset for New Zealand.
filter-branch documentation: non-zero exit status in command abort the filter
rev-parse: fix potential bus error with --parseopt option spec handling
Use a single implementation and API for copy_file()
Documentation/git-filter-branch: add a new msg-filter example
Correct fast-export file mode strings to match fast-import standard
Since commit 8c1ce0f46b filter-branch fails
when a <command> has a non-zero exit status. This commit makes it clear
in the documentation and also fixes the parent-filter example, that was
incorrectly returning non-zero when the commit being tested wasn't the
one to be rewritten.
Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful when you want to see parts of the commit object name
in "describe" output, even when the commit in question happens to be
a tagged version. Instead of just emitting the tag name, it will
describe such a commit as v1.2-0-deadbeef (0th commit since tag v1.2
that points at object deadbeef....).
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were no example on how to edit commit messages, so add an msg-filter
example.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we had a cop-out in the documentation to make the
behaviour "undefined" if configuration had more than one
insteadOf that would match the target URL, like this:
[url "git://git.or.cz/"]
insteadOf = "git.or.cz:" ; (1)
insteadOf = "repo.or.cz:" ; (2)
[url "/local/mirror/"]
insteadOf = "git.or.cz:myrepo" ; (3)
insteadOf = "repo.or.cz:" ; (4)
It would be most natural to take the longest and first match, i.e.
- rewrite "git.or.cz:frotz" to "git://git.or.cz/frotz" by using
(1),
- rewrite "git.or.cz:myrepo/xyzzy" to "/local/mirror/xyzzy" by favoring
(3) over (1), and
- rewrite "repo.or.cz:frotz" to "git://git.or.cz/frotz" by
favoring (2) over (4).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users with different preferences for access methods to the
same remote repositories to rewrite each other's URLs by pattern
matching across a large set of similiarly set up repositories to each
get the desired access.
For example, if you don't have a kernel.org account, you might want
settings like:
[url "git://git.kernel.org/pub/"]
insteadOf = master.kernel.org:/pub
Then, if you give git a URL like:
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
it will act like you gave it:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
and you can cut-and-paste pull requests in email without fixing them
by hand, for example.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/apply-whitespace:
ws_fix_copy(): move the whitespace fixing function to ws.c
apply: do not barf on patch with too large an offset
core.whitespace: cr-at-eol
git-apply --whitespace=fix: fix whitespace fuzz introduced by previous run
builtin-apply.c: pass ws_rule down to match_fragment()
builtin-apply.c: move copy_wsfix() function a bit higher.
builtin-apply.c: do not feed copy_wsfix() leading '+'
builtin-apply.c: simplify calling site to apply_line()
builtin-apply.c: clean-up apply_one_fragment()
builtin-apply.c: mark common context lines in lineinfo structure.
builtin-apply.c: optimize match_beginning/end processing a bit.
builtin-apply.c: make it more line oriented
builtin-apply.c: push match-beginning/end logic down
builtin-apply.c: restructure "offset" matching
builtin-apply.c: refactor small part that matches context
Sometimes scripts want (or need) the annotated tag name that exactly
matches a specific commit, or no tag at all. In such cases it can be
difficult to determine if the output of `git describe $commit` is a
real tag name or a tag+abbreviated commit. A common idiom is to run
git-describe twice:
if test $(git describe $commit) = $(git describe --abbrev=0 $commit)
...
but this is a huge waste of time if the caller is just going to pick a
different method to describe $commit or abort because it is not exactly
an annotated tag.
Setting the maximum number of candidates to 0 allows the caller to ask
for only a tag that directly points at the supplied commit, or to have
git-describe abort if no such item exists.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Packing objects can be done in parallell nowadays, but it's
only done if the config option pack.threads is set to a value
above 1. Because of that, the code-path used is often not the
most optimal one.
This patch adds a routine to detect the number of online CPU's
at runtime (online_cpus()). When pack.threads (or --threads=) is
given a value of 0, the number of threads is set to the number of
online CPU's. This feature is also documented.
As per Nicolas Pitre's recommendations, the default is still to
run pack-objects single-threaded unless explicitly activated,
either by configuration or by command line parameter.
The routine online_cpus() is a rework of "numcpus.c", written by
one Philip Willoughby <pgw99@doc.ic.ac.uk>. numcpus.c is in the
public domain and can presently be downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This combines the existing stash subcommands 'apply' and 'drop' to
allow a single stash entry to be applied and then dropped, in other
words 'popped', from the stash list.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a single stash entry to be deleted. It takes an
optional argument which is a stash reflog entry. If no
arguments are supplied, it drops the most recent stash entry.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/reflog-fix: (1490 commits)
builtin-reflog.c: don't install new reflog on write failure
hash: fix lookup_hash semantics
gitweb: Better chopping in commit search results
builtin-tag.c: remove cruft
git-merge-index documentation: clarify synopsis
send-email: fix In-Reply-To regression
git-reset --hard and git-read-tree --reset: fix read_cache_unmerged()
Teach git-grep --name-only as synonym for -l
diff: fix java funcname pattern for solaris
t3404: use configured shell instead of /bin/sh
git_config_*: don't assume we are parsing a config file
prefix_path: use is_absolute_path() instead of *orig == '/'
git-clean: handle errors if removing files fails
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
git.el: Set process-environment instead of invoking env
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
cvsexportcommit: be graceful when "cvs status" reorders the arguments
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
...
Conflicts:
Documentation/git-reflog.txt
t/t1410-reflog.sh
The options following <merge-program> are not -a, --, or <file>...,
but either -a, or -- <file>..., while -- is optional.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I expected git grep --name-only to give me only the file names,
much as git diff --name-only only generates filenames. Alas the
option is -l, which matches common external greps but doesn't match
other parts of the git UI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
The git-add documentation did not state clearly that the -u switch
updates only the tracked files that are in the current directory and
its subdirectories.
Signed-off-by: Pekka Kaitaniemi <kaitanie@cc.helsinki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
push: document the status output
Documentation/push: clarify matching refspec behavior
push: indicate partialness of error message
When you have particular reviewers you want to sent particular series
to, it's nice to be able to generate the whole series with them as
additional recipients, without configuring them into your general
headers or adding them by hand afterwards.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --rebase option was documented in the wrong place (under MERGE
STRATEGIES instead of OPTIONS). Noted the branch.<name>.rebase
option.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documents the branch.autosetupmerge=always setting and usage of --track
when branching from a local branch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output was meant to be a balance of self-explanatory and
terse. In case we have erred too far on the terse side, it
doesn't hurt to explain in more detail what each line means.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous text was correct, but it was easy to miss the
fact that we are talking about "matching" refs. That is, the
text can be parsed as "we push the union of the sets
of remote and local heads" and not "we push the intersection
of the sets of remote and local heads". (The former actually
doesn't make sense if you think about it, since we don't
even _have_ some of those heads). A careful reading would
reveal the correct meaning, but it makes sense to be as
explicit as possible in documentation.
We also explicitly use and introduce the term "matching";
this is a term discussed on the list, and it seems useful
to for users to be able to refer to this behavior by name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/browser:
Documentation: add 'git-web--browse.txt' and simplify other docs.
git-web--browse: fix misplaced quote in init_browser_path()
web--browse: Add a few quotes in 'init_browser_path'.
Documentation: instaweb: add 'git-web--browse' information.
Adjust .gitignore for 5884f1(Rename 'git-help--browse.sh'...)
git-web--browse: do not start the browser with nohup
instaweb: use 'git-web--browse' to launch browser.
Rename 'git-help--browse.sh' to 'git-web--browse.sh'.
help--browse: add '--config' option to check a config option for a browser.
help: make 'git-help--browse' usable outside 'git-help'.
Conflicts:
git-web--browse.sh
* pb/prepare-commit-msg:
git-commit: add a prepare-commit-msg hook
git-commit: Refactor creation of log message.
git-commit: set GIT_EDITOR=: if editor will not be launched
git-commit: support variable number of hook arguments
* jc/submittingpatches:
Documentation/SubmittingPatches - a suggested patch flow
Documentation/SubmittingPatches: What's Acked-by and Tested-by?
Documentation/SubmittingPatches: discuss first then submit
Documentation/SubmittingPatches: Instruct how to use [PATCH] Subject header
* maint:
Documentation/git-reset: Add an example of resetting selected paths
Documentation/git-reset: don't mention --mixed for selected-paths reset
Documentation/git-reset:
The option is accepted, but that is the only form selected-paths
variant of the reset command takes, so there is no point mentioning it.
And while we're at it, use the dashless git call.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3368d11 (Remove unnecessary git-rm --cached reference from
status output), the status output marks the "Added but not yet
committed" section as "Changes to be committed".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of fast-import will now dump information out upon
crashing, making it possible for the frontend developer to review
some state information and possibly restart the import from the
point where it crashed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-help.txt' and 'git-instaweb.txt' contained duplicated
information about 'git-web--browse'.
This patch puts this information where it belongs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the --relative option to say which subdirectory to
pretend to be in, so that in a bare repository, you can say:
$ git log --relative=drivers/ v2.6.20..v2.6.22 -- drivers/scsi/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --relative option to the diff family. When you start
from a subdirectory:
$ git diff --relative
shows only the diff that is inside your current subdirectory,
and without $prefix part. People who usually live in
subdirectories may like it.
There are a few things I should also mention about the change:
- This works not just with diff but also works with the log
family of commands, but the history pruning is not affected.
In other words, if you go to a subdirectory, you can say:
$ git log --relative -p
but it will show the log message even for commits that do not
touch the current directory. You can limit it by giving
pathspec yourself:
$ git log --relative -p .
This originally was not a conscious design choice, but we
have a way to affect diff pathspec and pruning pathspec
independently. IOW "git log --full-diff -p ." tells it to
prune history to commits that affect the current subdirectory
but show the changes with full context. I think it makes
more sense to leave pruning independent from --relative than
the obvious alternative of always pruning with the current
subdirectory, which would break the symmetry.
- Because this works also with the log family, you could
format-patch a single change, limiting the effect to your
subdirectory, like so:
$ cd gitk-git
$ git format-patch -1 --relative 911f1eb
But because that is a special purpose usage, this option will
never become the default, with or without repository or user
preference configuration. The risk of producing a partial
patch and sending it out by mistake is too great if we did
so.
- This is inherently incompatible with --no-index, which is a
bolted-on hack that does not have much to do with git
itself. I didn't bother checking and erroring out on the
combined use of the options, but probably I should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
Fix '-M' description. Old one reads as if the user can somehow "see"
the default regex when using -M along with -m.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This establishes what the "bad" whitespaces are for this
project.
The rules are:
- Unless otherwise specified, indent with SP that could be
replaced with HT are not "bad". But SP before HT in the
indent is "bad", and trailing whitespaces are "bad".
- For C source files, initial indent by SP that can be replaced
with HT is also "bad".
- Test scripts in t/ and test vectors in its subdirectories can
contain anything, so we make it unrestricted for now.
Anything "bad" will be shown in WHITESPACE error indicator in
diff output, and "apply --whitespace=warn" will warn about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is identical to `git blame', but it shows SVN revision
numbers instead of git commit hashes.
[ew: support "^initial commit" and minor formatting fixes]
Signed-off-by: Tim Stoakes <tim@stoakes.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 34a3e69 (git-branch: default to --track) the default was changed to
true, to help new git users. But yours truly forgot to update the
documentation. This fixes it.
Noticed by Kalle Olavi Niemitalo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'git-instaweb' uses 'git-web--browse', update the
documentation accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has the option --max-pack-size to limit the file
size of the packs to a certain amount of bytes. On platforms where
the pack file size is limited by filesystem constraints, it is easy
to forget this option, and this option does not exist for "git gc"
to begin with.
So introduce a config variable to set the default maximum, but make
this overrideable by the command line.
Suggested by Tor Arvid Lund.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
The prepare-commit-msg hook is run whenever a "fresh" commit message
is prepared, just before it is shown in the editor (if it is).
Its purpose is to modify the commit message in-place.
It takes one to three parameters. The first is the name of the file that
the commit log message. The second is the source of the commit message,
and can be: "message" (if a -m or -F option was given); "template" (if a
-t option was given or the configuration option commit.template is set);
"merge" (if the commit is a merge or a .git/MERGE_MSG file exists);
"squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by
a commit SHA1 as the third parameter (if a -c, -C or --amend option
was given).
If its exit status is non-zero, git-commit will abort. The hook is
not suppressed by the --no-verify option, so it should not be used
as a replacement for the pre-commit hook.
The sample prepare-commit-msg comments out the `Conflicts:` part of
a merge's commit message; other examples are commented out, including
adding a Signed-off-by line at the bottom of the commit messsage,
that the user can then edit or discard altogether.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparatory patch that provides a simple way for the future
prepare-commit-msg hook to discover if the editor will be launched.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did. This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo". In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.
A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it. This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to talk about "internal company procedures", but this
document is about submitting patches to the git mailing list.
More useful information is when to say Acked-by: and Tested-by:.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is something I've had in mind for some time. I get enough
e-mails as-is, and I suspect the workflow to get list members
involved would work better if we get the discussion concluded on
the list first before patches hit my tree (even 'next').
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new error mode allows a line to have a carriage return at the
end of the line when checking and fixing trailing whitespace errors.
Some people like to keep CRLF line ending recorded in the repository,
and still want to take advantage of the automated trailing whitespace
stripping. We still show ^M in the diff output piped to "less" to
remind them that they do have the CR at the end, but these carriage
return characters at the end are no longer flagged as errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the text, the argument of -m is <master> which should be used in the
command synopsis, too.
Signed-off-by: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the command syntax to better reflect the call parameters:
[save] [message...] => [save [<message>]].
Signed-off-by: Jari Aalto <jari.aalto AT cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the upstream branch is tracked, we can detect if that branch
was rebased since it was last fetched. Teach git to use that
information to rebase from the old remote head onto the new remote head.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While there is information about this in the configuration section, it was
missing in the options section.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -n option stands for --no-summary in git pull
[jes: reworded the description to avoid mentioning 'git-fetch';
also exclude '-n' conditional on git-pull -- ugly because of
the missing "else" statement in asciidoc]
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn expects its references under refs/remotes/*; but these will
not be copied or set by "git clone"; put in this man page the manual
fiddling that is required with current git-svn to get this to work.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a scenario when using git clone -s and git gc --prune togother is
dangerous. Document this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only "status" accepts "--cached" and the preferred way of
passing sub-command specific options is after the sub-command.
The documentation is adapted to reflect this.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the "This manual page describes only the most frequently used options."
text with the list of rev-list options in git-log manpage. (The git-diff-tree
options are already included.)
Move these options to a separate file and include it from both
git-rev-list.txt and git-log.txt.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lockfile API is a handy way to obtain a file that is cleaned
up if you die(). But sometimes you would need this sequence to
work:
1. hold_lock_file_for_update() to get a file descriptor for
writing;
2. write the contents out, without being able to decide if the
results should be committed or rolled back;
3. do something else that makes the decision --- and this
"something else" needs the lockfile not to have an open file
descriptor for writing (e.g. Windows do not want a open file
to be renamed);
4. call commit_lock_file() or rollback_lock_file() as
appropriately.
This adds close_lock_file() you can call between step 2 and 3 in
the above sequence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have nice set of placeholders, but nobody stepped in to fill
the gap in the API documentation, so I am doing it myself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere.enabled is _not_ on by default. The command is enabled if rr-cache
exists even when rerere.enabled is missing, and enabled or disabled by
explicitly setting the rerere.enabled variable.
This documents the default values of gc.auto, gc.autopacklimit
fetch.unpacklimit, receive.unpacklimit and transfer.unpacklimit.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
56752391a8 (Make "git gc" pack all
refs by default) changed the default of gc.packrefs to true, to
pack all refs by default in any repository. IOW, the users need
to disable it explicitly if they want to by setting the config
variable, since 1.5.3.
However, we forgot to update the documentation. This fixes it.
Signed-off-by: Florian La Roche <laroche@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two possible confusions with the color.interactive
description:
1. the short name "interactive" implies that it covers all
interactive commands; let's explicitly make it so, even
though there are no other interactive commands which
currently use it
2. Not all parts of "git add --interactive" are controlled
by color.interactive (specifically, the diffs require
tweaking color.diff). So let's clarify that it applies
only to displays and prompts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing level can understand that the user meant
"refs/heads/master" when the user says "master" or
"heads/master", but there is no easy way for the scripts to
figure it out without duplicating the dwim_ref() logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These 2 functions were missing from the manpage.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although everybody was quiet during the Christmas holiday, it's been
a week since -rc1, so here is -rc2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/commit-cleanup:
Allow selection of different cleanup modes for commit messages
builtin-commit: avoid double-negation in the code.
builtin-commit: fix amending of the initial commit
t7005: do not exit inside test.
We wanted to have a list in which one (and the sole, as it happen to
be) item in it is ".mailmap", but do not seem to be able to convince
AsciiDoc to format it correctly for manpages. Reformat it into a
paragraph that describes the said file to work around the issue.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
In everyday tasks, "repack -a -d -f" won't be used, so there
is not much point mentioning "repack". By showing the --prune
option to "gc", we can do without mentioning "git prune", too.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly typo and small grammatical fixes with one or two rewordings for
clarity. But note the important fix for status.relativepaths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git shell became much more powerful for existing CVS setups.
We should not hide from those people who only read release
notes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new options "--src-prefix=<prefix>", "--dst-prefix=<prefix>"
and "--no-prefix", you can now control the path prefixes of the diff
machinery. These used to by hardwired to "a/" for the source prefix
and "b/" for the destination prefix.
Initial patch by Pascal Obry. Sane option names suggested by Linus.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the config variables diff.external
and mergetool.<tool>.path.
Noticed by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'git peek-remote' is deprecated and only an alias for
'git ls-remote', it should not be referenced from other manual pages.
This also removes the description of the --exec option, which is no
longer present.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention for helper scripts has been
git-$TOOL--$HELPER. Since this is a "browse" helper for the
"help" tool, git-help--browse is a more sensible name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command was removed from the builtin command list and there was no
way to invoke it, but the code was still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This config variable makes it possible to choose the default format
used to display help. This format will be used only if no option
like -a|--all|-i|--info|-m|--man|-w|--web is passed to "git-help".
The following values are possible for this variable:
- "man" --> "man" program is used
- "info" --> "info" program is used
- "web" --> "git-browse-help" is used
By default we still show help using "man".
This patch also adds -m|--man command line option to use "man"
to allow overriding the "help.format" configuration variable.
Note that this patch also revert some recent changes in
"git-browse-help" because they prevented to look for config
variables in the global configuration file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wc/diff:
Test interaction between diff --check and --exit-code
Use shorter error messages for whitespace problems
Add tests for "git diff --check" with core.whitespace options
Make "diff --check" output match "git apply"
Unify whitespace checking
diff --check: minor fixups
"diff --check" should affect exit status
Lifted from the log message of c553ca25bd
(pack-objects: learn about pack index version 2).
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" has a --check option that can be used to check for whitespace
problems but it only reported by printing warnings to the
console.
Now when the --check option is used we give a non-zero exit status,
making "git diff --check" nicer to use in scripts and hooks.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/help:
RPM spec: Adjust htmldir
git-help -w: do not require to be in git repository
git.spec.in: remove python_path
Documentation: rename git.texi to user-manual.texi
Add git-browse-help to .gitignore
git-help -i: show info documentation from matching version of git
git-help -i: invoke info with document and node name
Documentation: add gitman.info target
Documentation: describe -w/--web option to "git-help".
Use {web,instaweb,help}.browser config options.
git-help: add -w|--web option to display html man page in a browser.
Documentation: describe -i/--info option to "git-help"
git-help: add -i|--info option to display info page.
* jc/shortlog-e:
shortlog: default to HEAD when the standard input is a tty
Invert numbers and names in the git-shortlog summary mode.
shortlog: document -e option
git-shortlog -e: show e-mail address as well
The "-z" format is all about machine parsability, but showing renamed
paths as "common/{a => b}/suffix" makes it impossible. The scripts would
never have successfully parsed "--numstat -z -M" in the old format.
This fixes the output format in a (hopefully minimally) backward
incompatible way.
* The output without -z is not changed. This has given a good way for
humans to view added and deleted lines separately, and showing the
path in combined, shorter way would preserve readability.
* The output with -z is unchanged for paths that do not involve renames.
Existing scripts that do not pass -M/-C are not affected at all.
* The output with -z for a renamed path is shown in a format that can
easily be distinguished from an unrenamed path.
This is based on Jakub Narebski's patch. Bugs and documentation typos
are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency, change "white space" and "whitespaces" to
"whitespace", fixing a couple of adjacent grammar problems in the
docs.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An item in a bulletted list in AsciiDoc is followed with two colons,
not just one.
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tip about speeding up subsequent operations is now
obsolete; since aecbf914, git-diff now squelches empty diffs
and performs an automatic refresh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
Also explain that "git instaweb" may use "web.browser" config
variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now when using "git help -w cmd", we will try to show the HTML man
page "git-cmd.html" in your prefered web browser.
To do that "help.c" code will call a new shell script
"git-browse-help".
This currently works only if the HTML versions of the man page
have been installed in $(htmldir) (typically "/usr/share/doc/git-doc"),
so new target to do that is added to "Documentation/Makefile".
The browser to use can be configured using the "web.browser"
config variable.
We try to open a new tab in an existing web browser, if possible.
The code in "git-browse-help" is heavily stolen from "git-mergetool"
by Theodore Y. Ts'o. Thanks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the --no-verify switch should mention the
commit-msg hook, not just the pre-commit hook.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is the result of reading over git-status with an
editorial eye:
- fix a few typo/grammatical errors
- mention untracked output
- present output types in the order they appear from the
command
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git-status was recently changed to output relative
paths. Setting this variable to false restores the old behavior for
any old-timers that prefer it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git bisect visualize" to be more useful in non-windowed
environments.
(1) When no option is given, and $DISPLAY is set, it continues to
spawn gitk as before;
(2) When no option is given, and $DISPLAY is unset, "git log" is run
to show the range of commits between the bad one and the good ones;
(3) If only "-flag" options are given, "git log <options>" is run.
E.g. "git bisect visualize --stat"
(4) Otherwise, all of the given options are taken as the initial part
of the command line and the commit range expression is given to
that command. E.g. "git bisect visualize tig" will run "tig"
history viewer to show between the bad one and the good ones.
As "visualize" is a bit too long to type, we also give it a shorter
synonym "view".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently with all other diff oriented commands, we have given paths
relative to the work tree root in git-status output for a long time.
This documents the recent behaviour change, as people's eyes (and worse
yet, scripts, although scripts should not parse "git status" output) may
depend on the old behaviour.
In the longer run, giving a --full-name option to git-diff Porcelain
similar to what ls-files has, and change the default for git-diff
Porcelain to show relative paths may be a good thing to do, in order to
hide the oddballness of this git-status behaviour, but that would have a
rather large impact to established expectation by existing users.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is mostly lifted from earlier series by Dan Zwell, but updated to
use "git config --get-color" and "git config --get-colorbool" to make it
simpler and more consistent with commands written in C.
A new configuration color.interactive variable is like color.diff and
color.status, and controls if "git-add -i" uses color.
A set of configuration variables, color.interactive.<slot>, are used to
define what color is used for the prompt, header, and help text.
For perl scripts, Git.pm provides $repo->get_color() method, which takes
the slot name and the default color, and returns the terminal escape
sequence to color the output text. $repo->get_colorbool() method can be
used to check if color is set to be used for a given operation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to help scripts find out color settings from
the configuration file.
git config --get-colorbool color.diff
inspects color.diff variable, and exits with status 0 (i.e. success) if
color is to be used. It exits with status 1 otherwise.
If a script wants "true"/"false" answer to the standard output of the
command, it can pass an additional boolean parameter to its command
line, telling if its standard output is a terminal, like this:
git config --get-colorbool color.diff true
When called like this, the command outputs "true" to its standard output
if color is to be used (i.e. "color.diff" says "always", "auto", or
"true"), and "false" otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wc/add-i:
git-add -i: add help text for list-and-choose UI
add -i: allow prefix highlighting for "Add untracked" as well.
Highlight keyboard shortcuts in git-add--interactive
Document all help keys in "git add -i" patch mode.
Add "--patch" option to git-add--interactive
add -i: Fix running from a subdirectory
builtin-add: fix command line building to call interactive
git-add -i: allow multiple selection in patch subcommand
Add path-limiting to git-add--interactive
Teach builtin-add to pass multiple paths to git-add--interactive
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
Makefile uses $(PERL_PATH) but Documentation/Makefile uses "perl"; that
means the two Makefiles can use two different Perl installations.
Teach Documentation/Makefile to use PERL_PATH that is exported from the
toplevel Makefile, and give a sane fallback for people who run "make"
from Documentation directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name 'verbatim' describes much better what this mode does with
signed tags. While at it, fix the documentation what it actually
does.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As well as allowing a default http.proxy option, allow it to be set
per-remote.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option -i|--info for "git-help" is documented only in the new
"git-help.txt" man page, but this new man page is referenced
from the "--help" option documentation in the "git.txt" man page.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http_proxy / HTTPS_PROXY variables used by curl to control
proxying may not be suitable for git. Allow the user to override them
in the configuration file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install-sh script as shipped with automake requires a space between
the -m switch and its argument. Since this is also the regular way of
doing it with other install implementations this change inserts the
missing space in all makefiles.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not usually make sense to record a commit that has the exact
same tree as its sole parent commit and that is why git-commit prevents
you from making such a mistake, but when data from foreign scm is
involved, it is a different story. We are equipped to represent such an
(perhaps insane, perhaps by mistake, or perhaps done on purpose) empty
change, and it is better to represent it bypassing the safety valve for
native use.
This is primarily for use by foreign scm interface scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The categorized list of commands in git(7) and the list of common
commands in "git help" output were maintained separately, which was
insane. This consolidates them to a single command-list.txt file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag-options:
git-tag: test that -s implies an annotated tag
"git-tag -s" should create a signed annotated tag
builtin-tag: accept and process multiple -m just like git-commit
Make builtin-tag.c use parse_options.
* maint:
Replace the word 'update-cache' by 'update-index' everywhere
cvsimport: fix usage of cvsimport.module
t7003-filter-branch: Fix test of a failing --msg-filter.
cvsimport: miscellaneous packed-ref fixes
cvsimport: use rev-parse to support packed refs
Add basic cvsimport tests
Earlier, 'git prune' would prune all loose unreachable objects.
This could be quite dangerous, as the objects could be used in
an ongoing operation.
This patch adds a mode to expire only loose, unreachable objects
which are older than a certain time. For example, by
git prune --expire 14.days
you can prune only those objects which are loose, unreachable
and older than 14 days (and thus probably outdated).
The implementation uses st.st_mtime rather than st.st_ctime,
because it can be tested better, using 'touch -d <time>' (and
omitting the test when the platform does not support that
command line switch).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows scripts to grab color setting from the user
configuration, translated to ANSI color escape sequence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling 'git pull' with the '--rebase' option, it performs a
fetch + rebase instead of a fetch + merge.
This behavior is more desirable than fetch + pull when a topic branch
is ready to be submitted and needs to be update.
fetch + rebase might also be considered a better workflow with shared
repositories in any case, or for contributors to a centrally managed
repository, such as WINE's.
As a convenience, you can set the default behavior for a branch by
defining the config variable branch.<name>.rebase, which is
interpreted as a bool. This setting can be overridden on the command
line by --rebase and --no-rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users expect that deleting a remote-tracking branch would prevent
fetch from creating it again, so be explcit about that it's not the case.
Also be a little more explicit about what fully merged means.
Signed-off-by: Jan Hudec <bulb@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: recovering from corruption
user-manual: clarify language about "modifying" old commits
user-manual: failed push to public repository
user-manual: define "branch" and "working tree" at start
git-checkout: describe detached head correctly
Some instructions on dealing with corruption of the object database.
Most of this text is from an example by Linus, identified by Nicolas
Pitre <nico@cam.org> with a little further editing by me.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
It's important to remember that git doesn't really allowing "editing" or
"modifying" commits, only replacing them by new commits. Redo some of
the language to make this clearer.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When the "--patch" option is supplied, the patch_update_cmd() function is
called bypassing the main_loop() and exits.
Seeing as builtin-add is the only caller of git-add--interactive we can
impose a strict requirement on the format of the arguments to avoid
possible ambiguity: an "--" argument must be used whenever any pathspecs
are passed, both with the "--patch" option and without it.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
This adds description of core.whitespace to the manual page of git-config,
and updates the stale description of whitespace handling in the manual
page of git-apply.
Also demote "strip" to a synonym status for "fix" as the value of --whitespace
option given to git-apply.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
Return the svn URL for the given path, or return the svn
repository URL if no path is given.
Added 18 tests to t/t9119-git-svn-info.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Implement "git-svn info" for files and directories based on the
"svn info" command. Note that the -r/--revision argument is not
supported yet.
Added 18 tests in t/t9119-git-svn-info.sh.
[ew: small fix to work without arguments on all working directories]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The HEAD@{...} syntax was documented in git-rev-parse manpage, which
is hard to find by someone looking for the documentation of porcelain.
git-reflog is probably the place where one expects to find this.
While I'm there, "git revlog show whatever" was also undocumented.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Clarify that core.compression provides a system-wide default to
other compression parameters.
* Explain that the default for pack.compression, -1, is "a default
compromise between speed and compression (currently equivalent
to level 6)" according to zlib.h.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* core.loosecompression stated that the default was "0 (best speed)",
when in fact 0 is "no compression", and the default is Z_BEST_SPEED,
which is 1.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: Fix references to deprecated commands
user-manual: mention "..." in "Generating diffs", etc.
user-manual: Add section "Why bisecting merge commits can be harder ..."
git-remote.txt: fix example url
Mention the -f switch in the release notes for clean.requireForce to avoid
possible misunderstandings.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'maint' of git://linux-nfs.org/~bfields/git:
Documentation: Fix references to deprecated commands
user-manual: mention "..." in "Generating diffs", etc.
user-manual: Add section "Why bisecting merge commits can be harder ..."
git-remote.txt: fix example url
This commit changes the rules for resolving refspecs to match the
rules for resolving refs in rev-parse. git-rev-parse uses clear rules
to resolve a short ref to its full name, which are well documented.
The rules for resolving refspecs documented in git-send-pack were
less strict and harder to understand. This commit replaces them by
the rules of git-rev-parse.
The unified rules are easier to understand and better resolve ambiguous
cases. You can now push from a repository containing several branches
ending on the same short name.
Note, this may break existing setups. For example, "master" will no longer
resolve to "origin/master" even when there is no other "master" elsewhere.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... by changing git-tar-tree reference to git-archive and removing
seemingly unrelevant footnote about git-ssh-{fetch,upload}.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We should mention the use of the "..." syntax for git-diff here. The
note about the difference between diff and the combined output of
git-format-patch then no longer fits so well, so remove it. Add a
reference to the git-format-patch[1] manpage.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This commit adds a discussion of the challenge of bisecting
merge commits to the user manual. The original author is
Junio C Hamano <gitster@pobox.com>, who posted the text to
the mailing list <http://marc.info/?l=git&m=119403257315527&w=2>.
His email was adapted for the manual.
The discussion is added to "Rewriting history and maintainig
patch series". The text added requires good understanding of
merging and rebasing. Therefore it should not be placed too
early in the manual. Right after the section on "Problems with
rewriting history", the discussion of bisect gives another reason
for linearizing as much of the history as possible.
The text includes suggestions and fixes by
Ralf Wildenhues <Ralf.Wildenhues@gmx.de> and
Benoit Sigoure <tsuna@lrde.epita.fr>.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
Customize diff-options depending on particular command as follows,
mostly to make git-diff and git-format-patch manuals less confusing:
* git-format-patch:
- Mark --patch-with-stat as being the default.
- Change -p description so that it matches what it actually does and
so that it doesn't refer to absent "section on generating
patches".
* git-diff: mark -p as being the default.
* git-diff-index/git-diff-files/git-diff-tree: mark --raw as being
the default.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a way for scripts to get at the new standard exclude
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
* bg/format-patch-N:
Rearrange git-format-patch synopsis to improve clarity.
format-patch: Test --[no-]numbered and format.numbered
format-patch: Add configuration and off switch for --numbered
Junio screwed up when applying the previous round of the patch;
rewording from "previous" to "old" does make the description
clearer.
Also revert the rewording from head to branch. The description
is talking about the branch's tip commit and using the word head
is clearer.
Based on input from Sergei and Bruce.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of examples has wrong output given the arguments provided.
Fix arguments to match the output.
Fix a minor syntax mistake in another place.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message in git-commit suggesting to use 'git rm --cached'
to unstage is just plain wrong. It really should mention 'git reset'.
Suggested by Jan Hudec.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the "filter" section of the gitattributes documentation to add
some
missing articles and improve some word choices without changing the
semantics of the section.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some basic documentation on the --mirror mode for git-push.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... by changing git-tar-tree reference to git-archive and removing
seemingly unrelevant footnote about git-ssh-{fetch,upload}.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
This looks like a cut and paste error from the git-checkout
explanation of --no-track.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some uses of git-rev-list are to run it with --objects to see if
a range of objects between two or more commits is fully connected
or not. In such a case the caller doesn't care about the actual
object names or hash hints so formatting this data only for it to
be dumped to /dev/null by a redirect is a waste of CPU time. If
all the caller needs is the exit status then --quiet can be used
to bypass the commit and object formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Old commit walkers other than http/curl transport have been removed
for some time now. Remove their documents.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to mark commands that are deprecated in the
command list of the primary manual page git(7), and uses it to
mark "git lost-found" and "git tar-tree" as deprecated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were 2 items "send patch to..." but having different set of
addresses to send patch to. Merge them together and move the resulting
item to the end of checklist.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" learnt the option "--lost-found" in v1.5.3-rc0~5, to make
"git lost-found" obsolete. It is time to deprecate "git lost-found".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if our code is quite a good documentation for our coding style,
some people seem to prefer a document describing it.
The part about the shell scripts is clearly just copied from one of
Junio's helpful mails, and some parts were added from comments by
Junio, Andreas Ericsson and Robin Rosenberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many git commands have a -q option to suppress output to stdout, let's
have it for git-reset too.
This was asked for by Joey Hess through
http://bugs.debian.org/444933
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format.numbered is a tri-state variable. Boolean values enable or
disable numbering by default and "auto" enables number when outputting
more than one patch.
--no-numbered (short: -N) will disable numbering.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixing path quoting in git-rebase
Remove unecessary hard-coding of EDITOR=':' VISUAL=':' in some test suites.
Documentation: quote commit messages consistently.
Remove escaping of '|' in manpage option sections
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
Documentation quotes commit messages 14 times with double-quotes, and 7
times with single-quotes. The patch turns everything to double-quotes.
A nice side effect is that documentation becomes more Windoze-friendly
as AFAIK single quotes won't work there.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The escaped were ending up verbatim in the generated documentation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to use pack index version 2 all the time since it has
proper protection against propagation of certain pack corruptions when
repacking which is not possible with index version 1, as demonstrated
in test t5302.
Hence this config option.
The default is still pack index version 1.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-format-patch.txt: fix explanation of an example.
git-filter-branch.txt: fix a typo.
git-clone.txt: Improve --depth description.
gitweb: Update config file example for snapshot feature in gitweb/INSTALL
git-diff.txt includes diff-options.txt which for the -p option refers
to a section "generating patches.." which is missing from the git-diff
documentation. This patch adapts diff-format.txt to additionally
mention the git-diff program, and includes diff-format.txt into
git-diff.txt.
Tino Keitel noticed this problem.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/mergetool:
mergetool: avoid misleading message "Resetting to default..."
mergetool: add support for ECMerge
mergetool: use path to mergetool in config var mergetool.<tool>.path
* maint:
Update GIT 1.5.3.5 Release Notes
git-rebase--interactive.sh: Make 3-way merge strategies work for -p.
git-rebase--interactive.sh: Don't pass a strategy to git-cherry-pick.
Fix --strategy parsing in git-rebase--interactive.sh
Make merge-recursive honor diff.renamelimit
cherry-pick/revert: more compact user direction message
core-tutorial: Use new syntax for git-merge.
git-merge: document but discourage the historical syntax
Prevent send-pack from segfaulting (backport from 'master')
Documentation/git-cvsexportcommit.txt: s/mgs/msg/ in example
Conflicts:
git-rebase--interactive.sh
* cc/skip:
Bisect: add "skip" to the short usage string.
Bisect run: "skip" current commit if script exit code is 125.
Bisect: add a "bisect replay" test case.
Bisect: add "bisect skip" to the documentation.
Bisect: refactor "bisect_{bad,good,skip}" into "bisect_state".
Bisect: refactor some logging into "bisect_write".
Bisect: refactor "bisect_write_*" functions.
Bisect: implement "bisect skip" to mark untestable revisions.
Bisect: fix some white spaces and empty lines breakages.
rev-list documentation: add "--bisect-all".
rev-list: implement --bisect-all
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically "git merge" took its command line arguments in a
rather strange order. Document the historical syntax, and also
document clearly that it is not encouraged in new scripts.
There is no reason to deprecate the historical syntax, as the
current code can sanely tell which syntax the caller is using,
and existing scripts by people do use the historical syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
No longer talk about Cogito since it's deprecated. Some scripts (such as
git-reset or git-branch) have undergone builtinification so adjust the text
to reflect this.
Fix a typo in the description of git-show-branch (merges are indicated by a
`-', not by a `.').
git-pull/git-push do not seem to use the dumb git-ssh-fetch/git-ssh-upload
(the text was probably missing a word).
Adjust a link that wasn't rendered properly because it was wrapped.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually you cannot revert a merge because you do not know which
side of the merge should be considered the mainline (iow, what
change to reverse).
With this patch, cherry-pick and revert learn -m (--mainline)
option that lets you specify the parent number (starting from 1)
of the mainline, so that you can:
git revert -m 1 $merge
to reverse the changes introduced by the $merge commit relative
to its first parent, and:
git cherry-pick -m 2 $merge
to replay the changes introduced by the $merge commit relative
to its second parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix "bisect bad" and "bisect good" short usage description.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the first sentence of the description of -x, in order to
make it easier to read and understand.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
For the manpage, avoid generating an em dash in code.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
This patch tries to make the description of --auto a little
more clear for new users, especially those referred by the
"git-gc --auto" notification message.
It also cleans up some grammatical errors and typos in the
original description, as well as rewording for clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-gc --auto tells the user to look at the man
page, it makes sense to mention the auto behavior near the
top (since this is likely to be most users' first exposure
to git-gc).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This commit adds a mechanism to provide absolute paths to the
external programs called by 'git mergetool'. A path can be
specified in the configuation variable mergetool.<tool>.path.
The configuration variable is similar to how we name branches
and remotes. It is extensible if we need to specify more details
about a tool.
The mechanism is especially useful on Windows, where external
programs are unlikely to be in PATH.
[sp: Fixed a few minor issues prior to applying]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
This commit implements the "delete" subcommand:
git reflog delete master@{2}
will delete the second reflog entry of the "master" branch.
With this, it should be easy to implement "git stash pop" everybody
seems to want these days.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
The man page for filter-branch still talked about writing the result
to the branch "newbranch". This is hopefully the last place where the
old behaviour was described.
Noticed by Bill Lear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-rebase uses format-patch's --ignore-if-in-upstream
option, but we never document the user-visible behavior. The
example is placed near the top of the example list rather
than at the bottom because it is:
a. a simple example
b. a reasonably common scenario for many projects (mail
some patches which get accepted upstream, then rebase)
[sp: Corrected direction of 'HEAD..<upstream>' set comparsion]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added a new section beneath "On Automatic following" called "On
Backdating Tags". This includes an explanation of when to use this
method, a brief explanation of the kind of date that can be used in
GIT_AUTHOR_DATE, and an example invocation of git-tag using a custom
setting of GIT_AUTHOR_DATE.
[sp: Corrected s/you/your/, noticed by Jeff King]
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the end-user requested a dry-run push we need to pass that flag
over to http-push and additionally make sure it does not actually
upload any changes to the remote server.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Just for consistency, use the spelling URL everywhere.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If I'm handed a file, then it typically lives outside the
working directory. git-log only operates on in-tree files,
so the first 'filename' should be an in-tree one, or it should
look at all files. This patch does the latter, so it would
also find renamed files. However, it is also slower.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make the definition of push in the glossary readable.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
em dashes were used inconsistently in the manual.
This changes them to the way they are used in US English.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
running the webrick server with git requires Ruby and Ruby's YAML and
Webrick libraries (both of which come standard with Ruby). nice for
single-user standalone invocations.
the --httpd=webrick option generates a ruby script on the fly to read
httpd.conf options and invoke the web server via library call. this
script is placed in the .git/gitweb directory. it also generates a
shell script in a feeble attempt to invoke ruby in a portable manner,
which assumes that 'ruby' is in the user's $PATH.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* lh/merge:
git-merge: add --ff and --no-ff options
git-merge: add support for --commit and --no-squash
git-merge: add support for branch.<name>.mergeoptions
git-merge: refactor option parsing
git-merge: fix faulty SQUASH_MSG
Add test-script for git-merge porcelain
* jc/autogc:
git-gc --auto: run "repack -A -d -l" as necessary.
git-gc --auto: restructure the way "repack" command line is built.
git-gc --auto: protect ourselves from accumulated cruft
git-gc --auto: add documentation.
git-gc --auto: move threshold check to need_to_gc() function.
repack -A -d: use --keep-unreachable when repacking
pack-objects --keep-unreachable
Export matches_pack_name() and fix its return value
Invoke "git gc --auto" from commit, merge, am and rebase.
Implement git gc --auto
* ap/dateformat:
Add a test script for for-each-ref, including test of date formatting
dateformat: parse %(xxdate) %(yydate:format) correctly
Make for-each-ref's grab_date() support per-atom formatting
Make for-each-ref allow atom names like "<name>:<something>"
parse_date_format(): convert a format name to an enum date_mode
The documentation used to say what the option does, but it
didn't mention a use case.
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was an 'l' (ell) instead of a '1' (one) in one of the gitlinks.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Whip post 1.5.3.3 maintenance series into shape.
git stash: document apply's --index switch
post-receive-hook: Remove the From field from the generated email header so that the pusher's name is used
* maint:
git-remote: exit with non-zero status after detecting errors.
rebase -i: squash should retain the authorship of the _first_ commit
git-add--interactive: Improve behavior on bogus input
git-add--interactive: Allow Ctrl-D to exit
It was determined on the mailing list, that it makes more sense for a
"squash" to keep the author of the first commit as the author for the
result of the squash.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated post-checkout hook to take a flag specifying whether the checkout is
a branch checkout or a file checkout (from the index).
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
