Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
Introduce a helper to simplify code to parse a common pattern that
expects either "--key" or "--key=<something>".
* cc/skip-to-optional-val:
t4045: reindent to make helpers readable
diff: add tests for --relative without optional prefix value
diff: use skip_to_optional_arg_default() in parsing --relative
diff: use skip_to_optional_arg_default()
diff: use skip_to_optional_arg()
index-pack: use skip_to_optional_arg()
git-compat-util: introduce skip_to_optional_arg()
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We only use it for remembering the
commits whose marks we have to clear after checking if the old HEAD is
detached. This is easy, though: We need to do that for the old commit,
the new one -- and for all refs.
Don't bother tracking exactly which commits need their flags cleared,
just nuke all we have in-core. This change is safe because refs can
point at anything, so other program parts can't depend on any kept flags
anyway. And since all refs are loaded we have to basically deal with
all commits anyway, so performance should not be negatively impacted.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field can have two values (2 for copy). Use this name instead for
clarity. Many places have already used this constant.
Note, the detect_rename assignments in merge-recursive.c remain
unchanged because it's actually a boolean there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* bw/submodule-sans-cache-compat:
submodule: convert get_next_submodule to not rely on the_index
submodule: used correct index in is_staging_gitmodules_ok
submodule: convert stage_updated_gitmodules to take a struct index_state
"git clone --shared" to borrow from a (secondary) worktree did not
work, even though "git clone --local" did. Both are now accepted.
* es/clone-shared-worktree:
clone: support 'clone --shared' from a worktree
A few structures and variables that are implementation details of
the decorate API have been renamed and then the API got documented
better.
* jt/decorate-api:
decorate: clean up and document API
Code clean-up.
* ks/branch-cleanup:
builtin/branch: strip refs/heads/ using skip_prefix
branch: update warning message shown when copying a misnamed branch
branch: group related arguments of create_branch()
branch: improve documentation and naming of create_branch() parameters
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
With a configuration variable rebase.abbreviateCommands set,
"git rebase -i" produces the todo list with a single-letter
command names.
* lb/rebase-i-short-command-names:
sequencer.c: drop 'const' from function return type
t3404: add test case for abbreviated commands
rebase -i: learn to abbreviate command names
rebase -i -x: add exec commands via the rebase--helper
rebase -i: update functions to use a flags parameter
rebase -i: replace reference to sha1 with oid
rebase -i: refactor transform_todo_ids
rebase -i: set commit to null in exec commands
Documentation: use preferred name for the 'todo list' script
Documentation: move rebase.* configs to new file
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
The man page of the "git describe" command explains the expected
output when using the --all option, i.e. the full reference path is
shown, including heads/ or tags/ prefix.
When 212945d4a8 ("Teach git-describe
to verify annotated tag names before output") made Git favor the
embedded name of annotated tags, it accidentally changed the output
format when the --all flag is given, only printing the tag's name
without the prefix.
Check if --all was specified and re-add the "tags/" prefix for this
special case to fix the regresssion.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for supplying the -m option with --fixup. Doing so has
errored out ever since --fixup was introduced. Before this, the only
way to amend the fixup message while committing was to use --edit and
amend it in the editor.
The use-case for this feature is one of:
* Leaving a quick note to self when creating a --fixup commit when
it's not self-evident why the commit should be squashed without a
note into another one.
* (Ab)using the --fixup feature to "fix up" commits that have already
been pushed to a branch that doesn't allow non-fast-forwards,
i.e. just noting "this should have been part of that other commit",
and if the history ever got rewritten in the future the two should
be combined.
In such a case you might want to leave a small message,
e.g. "forgot this part, which broke XYZ".
With this, --fixup <commit> -m"More" -m"Details" will result in a
commit message like:
!fixup <subject of <commit>>
More
Details
The reason the test being added here seems to squash "More" at the end
of the subject line of the commit being fixed up is because the test
code is using "%s%b" so the body immediately follows the subject, it's
not a bug in this code, and other tests t7500-commit.sh do the same
thing.
When the --fixup option was initially added the "Option -m cannot be
combined" error was expanded from -c, -C and -F to also include
--fixup[1]
Those options could also support combining with -m, but given what
they do I can't think of a good use-case for doing that, so I have not
made the more invasive change of splitting up the logic in commit.c to
first act on those, and then on -m options.
1. d71b8ba7c9 ("commit: --fixup option for use with rebase
--autosquash", 2010-11-02)
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ew/empty-merge-with-dirty-index-maint:
merge-recursive: avoid incorporating uncommitted changes in a merge
move index_has_changes() from builtin/am.c to merge.c for reuse
t6044: recursive can silently incorporate dirty changes in a merge
index_has_changes() is a function we want to reuse outside of just am,
making it also available for merge-recursive and merge-ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ancient part of codebase still shows dots after an abbreviated
object name just to show that it is not a full object name, but
these ellipses are confusing to people who newly discovered Git
who are used to seeing abbreviated object names and find them
confusing with the range syntax.
* ar/unconfuse-three-dots:
t2020: test variations that matter
t4013: test new output from diff --abbrev --raw
diff: diff_aligned_abbrev: remove ellipsis after abbreviated SHA-1 value
t4013: prepare for upcoming "diff --raw --abbrev" output format change
checkout: describe_detached_head: remove ellipsis after committish
print_sha1_ellipsis: introduce helper
Documentation: user-manual: limit usage of ellipsis
Documentation: revisions: fix typo: "three dot" ---> "three-dot" (in line with "two-dot").
The way "git worktree add" determines what branch to create from
where and checkout in the new worktree has been updated a bit.
* tg/worktree-create-tracking:
add worktree.guessRemote config option
worktree: add --guess-remote flag to add subcommand
worktree: make add <path> <branch> dwim
worktree: add --[no-]track option to the add subcommand
worktree: add can be created from any commit-ish
checkout: factor out functions to new lib file
Recent update to the submodule configuration code broke "diff-tree"
by accidentally stopping to read from the index upfront.
* bw/submodule-config-cleanup:
diff-tree: read the index so attribute checks work in bare repositories
An v2.12-era regression in pathspec match logic, which made it look
into submodule tree even when it is not desired, has been fixed.
* bw/pathspec-match-submodule-boundary:
pathspec: only match across submodule boundaries when requested
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
git describe --tags v0.99:Makefile
conversion-901-g7672db20c2:Makefile
tells us the Makefile as it was in v0.99 was introduced in commit 7672db20.
The walking is performed in reverse order to show the introduction of a
blob rather than its last occurrence.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit a2d725b7bd ("Use an external program to implement
fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the
get_refs_list and fetch methods in struct transport might not be
populated, hence the checks in clone and fetch. After that commit, all
transports populate get_refs_list and fetch, making the checks in clone
and fetch redundant. Remove those checks.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tagnames "git log --decorate" uses to annotate the commits can
now be limited to subset of available refs with the two additional
options, --decorate-refs[-exclude]=<pattern>.
* ra/decorate-limit-refs:
log: add option to choose which refs to decorate
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
The previous config handling relied on global variables, called
git_default_config() even when the key had already been handled by
git_sequencer_config() and did not initialize the diff configuration
variables. Improve this by: i) loading the default values for message
cleanup and gpg signing of commits into struct replay_opts;
ii) restructuring the code to return immediately once a key is
handled; and iii) calling git_diff_basic_config(). Note that
unfortunately it is not possible to return early if the key is handled
by git_gpg_config() as it does not indicate to the caller if the key
has been handled or not.
The sequencer should probably have been calling
git_diff_basic_config() before as it creates a patch when there are
conflicts. The shell version uses 'diff-tree' to create the patch so
calling git_diff_basic_config() should match that. Although 'git
commit' calls git_diff_ui_config() I don't think the output of
print_commit_summary() is affected by anything that is loaded by that
as print_commit_summary() always turns on rename detection so would
ignore the value in the user's configuration anyway. The other values
loaded by git_diff_ui_config() are about the formatting of patches so
are not relevant to print_commit_summary().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of implicitly relying on the global 'the_index', convert
'get_next_submodule()' to use the index of the repository stored in the
callback data 'struct submodule_parallel_fetch'.
Since this removes the last user of the index compatibility macros,
define 'NO_THE_INDEX_COMPATIBILITY_MACROS' to prevent future users of
these macros in submodule.c.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge --verify-signatures can be used to verify that the tip commit
of the branch being merged in is properly signed, but it's cumbersome to
have to specify that every time.
Add a configuration option that enables this behaviour by default, which
can be overridden by --no-verify-signatures.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify index-pack option parsing using
skip_to_optional_arg().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by
744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by
744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach (partial) fetch to inherit the filter-spec used by
the partial clone. Extend --no-filter to override this
inheritance.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to support filters. This is only allowed for the remote
configured in extensions.partialcloneremote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate out the calculation of remotes to be fetched from and the
actual fetching. This will allow us to include an additional step before
the actual fetching in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixup fetch-pack to accept --no-filter to be consistent with
rev-list and pack-objects.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support termination of an object traversal at any
object from a promisor remote (whether one that the local repo also has,
or one that the local repo knows about because it has another promisor
object that references it).
This will be used subsequently in gc and in the connectivity check used
by fetch.
For efficiency, if an object is referenced by a promisor object, and is
in the local repo only as a non-promisor object, object traversal will
not stop there. This is to avoid building the list of promisor object
references.
(In list-objects.c, the case where obj is NULL in process_blob() and
process_tree() do not need to be changed because those happen only when
there is a conflict between the expected type and the existing object.
If the object doesn't exist, an object will be synthesized, which is
fine.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach sha1_file to fetch objects from the remote configured in
extensions.partialclone whenever an object is requested but missing.
The fetching of objects can be suppressed through a global variable.
This is used by fsck and index-pack.
However, by default, such fetching is not suppressed. This is meant as a
temporary measure to ensure that all Git commands work in such a
situation. Future patches will update some commands to either tolerate
missing objects (without fetching them) or be more efficient in fetching
them.
In order to determine the code changes in sha1_file.c necessary, I
investigated the following:
(1) functions in sha1_file.c that take in a hash, without the user
regarding how the object is stored (loose or packed)
(2) functions in packfile.c (because I need to check callers that know
about the loose/packed distinction and operate on both differently,
and ensure that they can handle the concept of objects that are
neither loose nor packed)
(1) is handled by the modification to sha1_object_info_extended().
For (2), I looked at for_each_packed_object and others. For
for_each_packed_object, the callers either already work or are fixed in
this patch:
- reachable - only to find recent objects
- builtin/fsck - already knows about missing objects
- builtin/cat-file - warning message added in this commit
Callers of the other functions do not need to be changed:
- parse_pack_index
- http - indirectly from http_get_info_packs
- find_pack_entry_one
- this searches a single pack that is provided as an argument; the
caller already knows (through other means) that the sought object
is in a specific pack
- find_sha1_pack
- fast-import - appears to be an optimization to not store a file if
it is already in a pack
- http-walker - to search through a struct alt_base
- http-push - to search through remote packs
- has_sha1_pack
- builtin/fsck - already knows about promisor objects
- builtin/count-objects - informational purposes only (check if loose
object is also packed)
- builtin/prune-packed - check if object to be pruned is packed (if
not, don't prune it)
- revision - used to exclude packed objects if requested by user
- diff - just for optimization
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the names of the identifiers in decorate.h, document them, and
add an example of how to use these functions.
The example is compiled and run as part of the test suite.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the offset strlen("refs/heads/") to skip
the prefix "refs/heads/" use the skip_prefix() function which
is more communicative and verifies that the string actually
starts with that prefix.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user tries to rename a branch that has a "bad name" (e.g.,
starts with a '-') then we warn them that the misnamed branch has
been renamed "away". A similar message is shown when trying to create
a copy of a misnamed branch even though it doesn't remove the misnamed
branch. This is not correct and may confuse the user.
So, update the warning message shown to be more precise that only a copy
of the misnamed branch has been created. It's better to show the warning
message than not showing it at all as it makes the user aware of the
presence of a misnamed branch.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
39bd6f726 (Allow checkout -B <current-branch> to update the current
branch, 2011-11-26) added 'clobber_head' (now, 'clobber_head_ok')
"before" 'track' as 'track' was closely related 'clobber_head' for
the purpose the commit wanted to achieve. Looking from the perspective
of how the arguments are used it turns out that 'clobber_head' is
more related to 'force' than it is to 'track'.
So, re-order the arguments to keep the related arguments close
to each other.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use string_list_append_nodup() instead of string_list_append() to hand
over ownership of a detached strbuf and thus avoid leaking its memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression was introduced in 557a5998d (submodule: remove
gitmodules_config, 2017-08-03) to how attribute processing was handled
in bare repositories when running the diff-tree command.
By default the attribute system will first try to read ".gitattribute"
files from the working tree and then falls back to reading them from the
index if there isn't a copy checked out in the worktree. Prior to
557a5998d the index was read as a side effect of the call to
'gitmodules_config()' which ensured that the index was already populated
before entering the attribute subsystem.
Since the call to 'gitmodules_config()' was removed the index is no
longer being read so when the attribute system tries to read from the
in-memory index it doesn't find any ".gitattribute" entries effectively
ignoring any configured attributes.
Fix this by explicitly reading the index during the setup of diff-tree.
Reported-by: Ben Boeckel <ben.boeckel@kitware.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
"git config --expiry-date gc.reflogexpire" can read "2.weeks" from
the configuration and report it as a timestamp, just like "--int"
would read "1k" and report 1024, to help consumption by scripts.
* hm/config-parse-expiry-date:
config: add --expiry-date
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
We do not want an ellipsis displayed following an (abbreviated) SHA-1
value.
The days when this was necessary to indicate the truncation to
lower-level Git commands and/or the user are bygone.
However, to ease the transition, the ellipsis will still be printed if
the user sets the environment variable GIT_PRINT_SHA1_ELLIPSIS to "yes".
Correct documentation with respect to what describe_detached_head prints
when GIT_PRINT_SHA1_ELLIPSIS is not set as indicated above.
Add tests for the old and new behaviour.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rebase -i` already know how to interpret single-letter command
names. Teach it to generate the todo list with these same abbreviated
names.
Based-on-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent work on `git-rebase--interactive` aims to convert shell code to
C. Even if this is most likely not a big performance enhancement, let's
convert it too since a coming change to abbreviate command names
requires it to be updated.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update functions used in the rebase--helper so that they take a generic
'flags' parameter instead of a growing list of options.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are trying to abstract the hash function name elsewhere in the
code base, lets use OID instead of SHA-1 in the rebase--helper too.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transform_todo_ids function is a little hard to read. Lets try
to make it easier by using more of the strbuf API. Also, since we'll
soon be adding command abbreviations, let's rename the function so
it's name reflects that change.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, index-pack will be taught to write ".promisor"
files which are similar to the ".keep" files it knows how to write.
Refactor the writing of ".keep" files, so that the implementation of
writing ".promisor" files becomes easier.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat missing promisor objects provided on the CLI as
an error when extensions.partialclone is set.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat missing promisor objects indirectly pointed to
by refs as an error when extensions.partialclone is set.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsck to not treat refs referring to missing promisor objects as an
error when extensions.partialclone is set.
For the purposes of warning about no default refs, such refs are still
treated as legitimate refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git does not support repos with very large numbers of objects
or repos that wish to minimize manipulation of certain blobs (for
example, because they are very large) very well, even if the user
operates mostly on part of the repo, because Git is designed on the
assumption that every referenced object is available somewhere in the
repo storage. In such an arrangement, the full set of objects is usually
available in remote storage, ready to be lazily downloaded.
Teach fsck about the new state of affairs. In this commit, teach fsck
that missing promisor objects referenced from the reflog are not an
error case; in future commits, fsck will be taught about other cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support --no-filter to override a
previous --filter=<filter_spec> argument. This is
to be consistent with commands that use OPT_PARSE
macros.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 74ed43711f (grep: enable recurse-submodules to work on <tree>
objects, 2016-12-16) taught 'tree_entry_interesting()' to be able to
match across submodule boundaries in the presence of wildcards. This is
done by performing literal matching up to the first wildcard and then
punting to the submodule itself to perform more accurate pattern
matching. Instead of introducing a new flag to request this behavior,
commit 74ed43711f overloaded the already existing 'recursive' flag in
'struct pathspec' to request this behavior.
This leads to a bug where whenever any other caller has the 'recursive'
flag set as well as a pathspec with wildcards that all submodules will
be indicated as matches. One simple example of this is:
git init repo
cd repo
git init submodule
git -C submodule commit -m initial --allow-empty
touch "[bracket]"
git add "[bracket]"
git commit -m bracket
git add submodule
git commit -m submodule
git rev-list HEAD -- "[bracket]"
Fix this by introducing the new flag 'recurse_submodules' in 'struct
pathspec' and using this flag to determine if matches should be allowed
to cross submodule boundaries.
This fixes https://github.com/git-for-windows/git/issues/1371.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
"git branch" and "git checkout -b" are now forbidden from creating
a branch whose name is "HEAD".
* jc/branch-name-sanity:
builtin/branch: remove redundant check for HEAD
branch: correctly reject refs/heads/{-dash,HEAD}
branch: split validate_new_branchname() into two
branch: streamline "attr_only" handling in validate_new_branchname()
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
"git add --renormalize ." is a new and safer way to record the fact
that you are correcting the end-of-line convention and other
"convert_to_git()" glitches in the in-repository data.
* tb/add-renormalize:
add: introduce "--renormalize"
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor the functions out, so they can be re-used from other places. In
particular these functions will be re-used in builtin/worktree.c to make
git worktree add dwim more.
While there add some docs to the function.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message spans over 2 lines but the C concatenation does not add
the needed space between the two lines.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load default values for message cleanup and gpg signing of commits in
preparation for committing without forking 'git commit'. Note that we
interpret commit.cleanup=scissors to mean COMMIT_MSG_CLEANUP_SPACE to
be consistent with 'git commit'
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move print_commit_summary() from builtin/commit.c to sequencer.c so it
can be shared with other commands. The function is modified by
changing the last argument to a flag so callers can specify whether
they want to show the author date in addition to specifying if this is
an initial commit.
If the sequencer dies in print_commit_summary() (which can only happen
when cherry-picking or reverting) then neither the todo list nor the
abort safety file are updated to reflect the commit that was just
made. print_commit_summary() can die if:
- The commit that was just created cannot be found or parsed.
- HEAD cannot be resolved either because some other process is
updating it (which is bad news in the middle of a cherry-pick) or
because it is corrupt.
- log_tree_commit() cannot read some objects.
In all those cases dying will leave the sequencer in a sane state for
aborting; 'git cherry-pick --abort' will rewind HEAD to the last
successful commit before there was a problem with HEAD or the object
database. If the user somehow fixes the problem and runs 'git
cherry-pick --continue' then the sequencer will try and pick the same
commit again which may or may not be what the user wants depending on
what caused print_commit_summary() to die. If print_commit_summary()
returned an error instead then update_abort_safety_file() would try to
resolve HEAD which may or may not be successful. If it is successful
then running 'git rebase --abort' would not rewind HEAD to the last
successful commit which is not what we want.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pack-objects to use the filtering provided by the
traverse_commit_list_filtered() interface to omit unwanted
objects from the resulting packfile.
Filtering requires the use of the "--stdout" option.
Add t5317 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Add t6112 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git notes prune' in man page and usage message
incorrectly lists options as '[-n | -v]', rather than '[-n] [-v]'.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mention of git prune's "--progress" option to the SYNOPSIS and
DESCRIPTION sections of the man page, and to the usage message of "git
prune" itself.
While we're here, move the explanation of "--" toward the end of the
DESCRIPTION section, where it belongs.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move run_rewrite_hook() from bulitin/commit.c to sequencer.c so it can
be shared with other commands and add a new function
commit_post_rewrite() based on the code in builtin/commit.c that
encapsulates rewriting notes and running the post-rewrite hook. Once
the sequencer learns how to create commits without forking 'git
commit' these functions will be used when squashing commits.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add update_head_with_reflog() based on the code that updates HEAD
after committing in builtin/commit.c that can be called by 'git
commit' and other commands.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --expiry-date as a data-type for config files when
'git config --get' is used. This will return any relative
or fixed dates from config files as timestamps.
This is useful for scripts (e.g. gc.reflogexpire) that work
with timestamps so that '2.weeks' can be converted to a format
acceptable by those scripts/functions.
Following the convention of git_config_pathname(), move
the helper function required for this feature from
builtin/reflog.c to builtin/config.c where other similar
functions exist (e.g. for --bool or --path), and match
the order of parameters with other functions (i.e. output
pointer as first parameter).
Signed-off-by: Haaris Mehmood <hsed@unimetic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out describing commits into its own function `describe_commit`,
which will put any output to stdout into a strbuf, to be printed
afterwards.
As the next patch will teach Git to describe blobs using a commit and path,
this refactor will make it easy to reuse the code describing commits.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When debugging, print the received argument at the start of the
function instead of in the middle. This ensures that the received
argument is printed in all code paths, and also allows a subsequent
refactoring to not need to move the "arg" parameter.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `describe` has already a variable named `oid` declared at
the beginning of the function for an object id. Do not shadow that
variable with a pointer to an object id.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop (perhaps overly cautious) sanity check before using the index
read from the filesystem at runtime.
* bp/read-index-from-skip-verification:
read_index_from(): speed index loading by skipping verification of the entry order
Doc and message updates to teach users "bisect view" is a synonym
for "bisect visualize".
* rd/bisect-view-is-visualize:
bisect: mention "view" as an alternative to "visualize"
Code clean-up in refs API implementation.
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
"git commit", after making a commit, did not check for errors when
asking on what branch it made the commit, which has been correted.
* ao/check-resolve-ref-unsafe-result:
commit: check result of resolve_ref_unsafe
The lower level code has been made to handle this case for the
sake of consistency. This has made this check redundant.
So, remove the redundant check.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other error messages from notes use stderr. Do the same when
alerting users of an unresolved notes merge.
Fix the output redirection in t3310 and t3320 as well. Previously, the
tests directed output to a file, but stderr was either not captured or
not sent to the file due to the order of the redirection operators.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
Switch the uses of empty_tree_oid and empty_blob_oid to use the
current_hash abstraction that represents the current hash algorithm in
use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak a small number of files to mention "view" as an alternative to
"visualize".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the functions that check for empty messages from bulitin/commit.c
to sequencer.c so they can be shared with other commands. The
functions are refactored to take an explicit cleanup mode and template
filename passed by the caller.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
We currently have seven callers of `reduce_heads(foo)`. Six of them do
not use the original list `foo` again, and actually, all six of those
end up leaking it.
Introduce and use `reduce_heads_replace(&foo)` as a leak-free version of
`foo = reduce_heads(foo)` to fix several of these. Fix the remaining
leaks using `free_commit_list()`.
While we're here, document `reduce_heads()` and mark it as `extern`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several functions, we iterate through a commit list by assigning
`result = result->next`. As a consequence, we lose the original pointer
and eventually leak the list.
Rewrite the loops so that we keep the original pointers, then call
`free_commit_list()`. Various alternatives were considered:
1) Use `UNLEAK(result)` before the loop. Simple change, but not very
pretty. These would definitely be new lows among our usages of UNLEAK.
2) Use `pop_commit()` when looping. Slightly less simple change, but it
feels slightly preferable to first display the list, then free it.
3) As in this patch, but with `UNLEAK()` instead of freeing. We'd still
go through all the trouble of refactoring the loop, and because it's not
super-obvious that we're about to exit, let's just free the lists -- it
probably doesn't affect the runtime much.
In `handle_independent()` we can drop `result` while we're here and
reuse the `revs`-variable instead. That matches several other users of
`reduce_heads()`. The memory-leak that this hides will be addressed in
the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code in post_read_index_from() to catch out of order
entries when reading an index file. This order verification is ~13%
of the cost of every call to read_index_from().
Update check_ce_order() so that it skips this verification unless
the "verify_ce_order" global variable is set.
Teach fsck to force this verification.
The effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD HEAD~1
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.41(0.04+0.04) 0.50(0.00+0.10) +22.0%
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
"git pull" has been taught to accept "--[no-]signoff" option and
pass it down to "git merge".
* wk/pull-signoff:
pull: pass --signoff/--no-signoff to "git merge"
GSoC.
* pc/submodule-helper:
submodule: port submodule subcommand 'status' from shell to C
submodule--helper: introduce for_each_listed_submodule()
submodule--helper: introduce get_submodule_displaypath()
An early part of piece-by-piece rewrite of "git bisect".
* pb/bisect-helper:
bisect--helper: `is_expected_rev` & `check_expected_revs` shell function in C
t6030: explicitly test for bisection cleanup
bisect--helper: `bisect_clean_state` shell function in C
bisect--helper: `write_terms` shell function in C
bisect--helper: rewrite `check_term_format` shell function in C
bisect--helper: use OPT_CMDMODE instead of OPT_BOOL
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
"git commit", after making a commit, did not check for errors when
asking on what branch it made the commit, which has been correted.
* ao/check-resolve-ref-unsafe-result:
commit: check result of resolve_ref_unsafe
Some codepaths did not check for errors when asking what branch the
HEAD points at, which have been fixed.
* jk/misc-resolve-ref-unsafe-fixes:
worktree: handle broken symrefs in find_shared_symref()
log: handle broken HEAD in decoration check
remote: handle broken symrefs
test-ref-store: avoid passing NULL to printf
Calling cmd_foo() as if it is a general purpose helper function is
a no-no. Correct two instances of such to set an example.
* jc/no-cmd-as-subroutine:
merge-ours: do not use cmd_*() as a subroutine
describe: do not use cmd_*() as a subroutine
An earlier update made it possible to use an on-stack in-core
lockfile structure (as opposed to having to deliberately leak an
on-heap one). Many codepaths have been updated to take advantage
of this new facility.
* ma/lockfile-fixes:
read_cache: roll back lock in `update_index_if_able()`
read-cache: leave lock in right state in `write_locked_index()`
read-cache: drop explicit `CLOSE_LOCK`-flag
cache.h: document `write_locked_index()`
apply: remove `newfd` from `struct apply_state`
apply: move lockfile into `apply_state`
cache-tree: simplify locking logic
checkout-index: simplify locking logic
tempfile: fix documentation on `delete_tempfile()`
lockfile: fix documentation on `close_lock_file_gently()`
treewide: prefer lockfiles on the stack
sha1_file: do not leak `lock_file`
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a commit list and returns a commit list. The
returned list is built by modifying the original list. Thus the caller
should not use the original list again (and after the next commit fixes
a memory leak, it must not).
Change the function signature so that it takes a **list and has void
return type. That should make it harder to misuse this function.
While we're here, document this function.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --recurse-submodules, we add each submodule that we encounter to
the list of alternate object databases. With threading, our changes to
the list are not protected against races. Indeed, ThreadSanitizer
reports a race when we call `add_to_alternates_memory()` around the same
time that another thread is reading in the list through
`read_sha1_file()`.
Take the grep read-lock while adding the submodule. The lock is used to
serialize uses of non-thread-safe parts of Git's API, including
`read_sha1_file()`.
Helped-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_CLR` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_CLR(&E, fld)
+ E.flags.fld = 0
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_CLR(ptr, fld)
+ ptr->flags.fld = 0
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the set of parallel touched flags are no longer being used,
remove them.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-show is unique in that it wants to use textconv by default except
for when it is showing blobs. When asked to show a blob, show doesn't
want to use textconv unless the user explicitly requested that it be
used by providing the command line flag '--textconv'.
Currently this is done by using a parallel set of 'touched' flags which
get set every time a particular flag is set or cleared. In a future
patch we want to eliminate this parallel set of flags so instead of
relying on if the textconv flag has been touched, add a new flag
'TEXTCONV_SET_VIA_CMDLINE' which is only set if textconv is set to true
via the command line.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot add many more flags to the diff machinery due to the
limitations of the number of flags that can be stored in a single
unsigned int. In order to allow for more flags to be added to the diff
machinery in the future this patch converts the flags to be stored in
bitfields in 'struct diff_flags'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of explicitly setting the 'DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG'
flag, use the 'DIFF_OPT_SET' macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the status command more flexibility in how ignored files are
reported. Currently, the reporting of ignored files and untracked
files are linked. You cannot control how ignored files are reported
independently of how untracked files are reported (i.e. `all` vs
`normal`). This makes it impossible to show untracked files with the
`all` option, but show ignored files with the `normal` option.
This work 1) adds the ability to control the reporting of ignored
files independently of untracked files and 2) introduces the concept
of status reporting ignored paths that explicitly match an ignored
pattern. There are 2 benefits to these changes: 1) if a consumer needs
all untracked files but not all ignored files, there is a performance
benefit to not scanning all contents of an ignored directory and 2)
returning ignored files that explicitly match a path allow a consumer
to make more informed decisions about when a status result might be
stale.
This commit implements --ignored=matching with --untracked-files=all.
The following commit will implement --ignored=matching with
--untracked=files=normal.
As an example of where this flexibility could be useful is that our
application (Visual Studio) runs the status command and presents the
output. It shows all untracked files individually (e.g. using the
'--untracked-files==all' option), and would like to know about which
paths are ignored. It uses information about ignored paths to make
decisions about when the status result might have changed.
Additionally, many projects place build output into directories inside
a repository's working directory (e.g. in "bin/" and "obj/"
directories). Normal usage is to explicitly ignore these 2 directory
names in the .gitignore file (rather than or in addition to the *.obj
pattern).If an application could know that these directories are
explicitly ignored, it could infer that all contents are ignored as
well and make better informed decisions about files in these
directories. It could infer that any changes under these paths would
not affect the output of status. Additionally, there can be a
significant performance benefit by avoiding scanning through ignored
directories.
When status is set to report matching ignored files, it has the
following behavior. Ignored files and directories that explicitly
match an exclude pattern are reported. If an ignored directory matches
an exclude pattern, then the path of the directory is returned. If a
directory does not match an exclude pattern, but all of its contents
are ignored, then the contained files are reported instead of the
directory.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push options need to be given explicitly, via the command line as "git
push --push-option <option>". Add the config option push.pushOption,
which is a multi-valued option, containing push options that are sent
by default.
When push options are set in the lower-priority configulation file
(e.g. /etc/gitconfig, or $HOME/.gitconfig), they can be unset later in
the more specific repository config by the empty string.
Add tests and update documentation as well.
Signed-off-by: Marius Paliga <marius.paliga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
It's possible for resolve_ref_unsafe() to return NULL with a
REF_ISSYMREF flag if a symref points to a broken ref. In
this case, the read_remote_branches() function will segfault
passing the name to xstrdup().
This is hard to trigger in practice, since this function is
used as a callback to for_each_ref(), which will skip broken
refs in the first place (so it would have to be broken
racily, or for us to see a transient filesystem error).
If we see such a racy broken outcome let's treat it as "not
a symref". This is exactly the same thing that would happen
in the non-racy case (our function would not be called at
all, as for_each_ref would skip the broken symref).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add check of the resolved HEAD reference while printing of a commit summary.
resolve_ref_unsafe() may return NULL pointer if underlying calls of lstat() or
open() fail in files_read_raw_ref().
Such situation can be caused by race: file becomes inaccessible to this moment.
Signed-off-by: Andrey Okoshkin <a.okoshkin@samsung.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
The expansion returned from strbuf_check_branch_ref always starts with
"refs/heads/" by construction, but there is nothing about its name or
advertised API making that obvious. This command is used to process
human-supplied input from the command line and is usually not the
inner loop, so we can spare some cycles to be more defensive. Instead
of hard-coding the offset strlen("refs/heads/") to skip, verify that
the expansion actually starts with refs/heads/.
[jn: split out from a larger patch, added explanation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 136c8c8b8f.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Teach upload-pack and receive-pack to understand and respond using
protocol version 1, if requested.
Protocol version 1 is simply the original and current protocol (what I'm
calling version 0) with the addition of a single packet line, which
precedes the ref advertisement, indicating the protocol version being
spoken.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the head_sha1 member to be head_oid instead. This is required
to convert resolve_ref_unsafe.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reflog_expire already used struct object_id internally, but it did not
take it as a parameter. Adjust the parameter (and the callers) to pass
a pointer to struct object_id instead of a pointer to unsigned char.
Remove the temporary inserted earlier as it is no longer required.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers and internals, including struct read_ref_at_cb, of
read_ref_at to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert peel_ref (and its corresponding backend) to struct object_id.
This transformation was done with an update to the declaration,
definition, comments, and test helper and the following semantic patch:
@@
expression E1, E2;
@@
- peel_ref(E1, E2.hash)
+ peel_ref(E1, &E2)
@@
expression E1, E2;
@@
- peel_ref(E1, E2->hash)
+ peel_ref(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the last unconverted callers to peel_ref. While we're
fixing that, convert the rest of the file, since it will need to be
converted at some point anyway.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert traverse_bitmap_commit_list and the callbacks it takes to use a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining uses of unsigned char [20] to struct object_id.
This conversion is needed for dwim_log.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert check_connected and the callbacks it takes to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking if a proposed name is appropriate for a branch is strictly
a subset of checking if we want to allow creating or updating a
branch with such a name. The mysterious sounding 'attr_only'
parameter to validate_new_branchname() is used to switch the
function between these two roles.
Instead, split the function into two, and adjust the callers. A new
helper validate_branchname() only checks the name and reports if the
branch already exists.
This loses one NEEDSWORK from the branch API.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge can take --signoff, but without pull passing --signoff down, it
is inconvenient to use; allow 'pull' to take the option and pass it
through.
The order of options in merge-options.txt is mostly alphabetical by
long option since 7c85d274 (Documentation/merge-options.txt: order
options in alphabetical groups, 2009-10-22). The long-option bit
didn't make it into the commit message, but it's under the fold in
[1]. I've put --signoff between --log and --stat to preserve the
alphabetical order.
[1]: https://public-inbox.org/git/87iqe7zspn.fsf@jondo.cante.net/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The call to cmd_diff_index() "git merge-ours" makes has been working
by accident that the function did not call exit(3), and the caller
exited almost immediately after making a call, but it sets a bad
precedent for people to cut and paste.
For finding out if the index exactly matches the HEAD (or a given
tree-ish), there is index_differs_from() which is exactly written
for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cmd_foo() function is a moral equivalent of 'main' for a Git
subcommand 'git foo', and as such, it is allowed to do many things
that make it unsuitable to be called as a subroutine, including
- call exit(3) to terminate the process;
- allocate resource held and used throughout its lifetime, without
releasing it upon return/exit;
- rely on global variables being initialized at program startup,
and update them as needed, making another clean invocation of the
function impossible.
The call to cmd_diff_index() "git describe" makes has been working
by accident that the function did not call exit(3); it sets a bad
precedent for people to cut and paste.
We could invoke it via the run_command() interface, but the diff
family of commands have helper functions in diff-lib.c that are
meant to be usable as subroutines, and using the latter does not
make the resulting code all that longer. Use it.
Note that there is also an invocation of cmd_name_rev() at the end;
"git describe --contains" massages its command line arguments to be
suitable for "git name-rev" invocation and jumps to it, never to
regain control. This call is left as-is as an exception to the
rule. When we start to allow calling name-rev repeatedly as a
helper function, we would be able to remove this call as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This aims to make git-submodule 'status' a built-in. Hence, the function
cmd_status() is ported from shell to C. This is done by introducing
four functions: module_status(), submodule_status_cb(),
submodule_status() and print_status().
The function module_status() acts as the front-end of the subcommand.
It parses subcommand's options and then calls the function
module_list_compute() for computing the list of submodules. Then
this functions calls for_each_listed_submodule() looping through the
list obtained.
Then for_each_listed_submodule() calls submodule_status_cb() for each of
the submodule in its list. The function submodule_status_cb() calls
submodule_status() after passing appropriate arguments to the funciton.
Function submodule_status() is responsible for generating the status
each submodule it is called for, and then calls print_status().
Finally, the function print_status() handles the printing of submodule's
status.
Function set_name_rev() is also ported from git-submodule to the
submodule--helper builtin function compute_rev_name(), which now
generates the value of the revision name as required.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce function for_each_listed_submodule() and replace a loop
in module_init() with a call to it.
The new function will also be used in other parts of the
system in later patches.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix regression of "git add -p" for users with "color.ui = always"
in their configuration, by merging the topic below and adjusting it
for the 'master' front.
* jk/ui-color-always-to-auto:
t7301: use test_terminal to check color
t4015: use --color with --color-moved
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Many variables that points at a region of memory that will live
throughout the life of the program have been marked with UNLEAK
marker to help the leak checkers concentrate on real leaks..
* ma/builtin-unleak:
builtin/: add UNLEAKs
If the original version of `write_locked_index()` returned with an
error, it didn't roll back the lockfile unless the error occured at the
very end, during closing/committing. See commit 03b866477 (read-cache:
new API write_locked_index instead of write_index/write_cache,
2014-06-13).
In commit 9f41c7a6b (read-cache: close index.lock in do_write_index,
2017-04-26), we learned to close the lock slightly earlier in the
callstack. That was mostly a side-effect of lockfiles being implemented
using temporary files, but didn't cause any real harm.
Recently, commit 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05) introduced a subtle bug. If the temporary file is deleted
(i.e., the lockfile is rolled back), the tempfile-pointer in the `struct
lock_file` will be left dangling. Thus, an attempt to reuse the
lockfile, or even just to roll it back, will induce undefined behavior
-- most likely a crash.
Besides not crashing, we clearly want to make things consistent. The
guarantees which the lockfile-machinery itself provides is A) if we ask
to commit and it fails, roll back, and B) if we ask to close and it
fails, do _not_ roll back. Let's do the same for consistency.
Do not delete the temporary file in `do_write_index()`. One of its
callers, `write_locked_index()` will thereby avoid rolling back the
lock. The other caller, `write_shared_index()`, will delete its
temporary file anyway. Both of these callers will avoid undefined
behavior (crashing).
Teach `write_locked_index(..., COMMIT_LOCK)` to roll back the lock
before returning. If we have already succeeded and committed, it will be
a noop. Simplify the existing callers where we now have a superfluous
call to `rollback_lockfile()`. That should keep future readers from
wondering why the callers are inconsistent.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`write_locked_index()` takes two flags: `COMMIT_LOCK` and `CLOSE_LOCK`.
At most one is allowed. But it is also possible to use no flag, i.e.,
`0`. But when `write_locked_index()` calls `do_write_index()`, the
temporary file, a.k.a. the lockfile, will be closed. So passing `0` is
effectively the same as `CLOSE_LOCK`, which seems like a bug.
We might feel tempted to restructure the code in order to close the file
later, or conditionally. It also feels a bit unfortunate that we simply
"happen" to close the lock by way of an implementation detail of
lockfiles. But note that we need to close the temporary file before
`stat`-ing it, at least on Windows. See 9f41c7a6b (read-cache: close
index.lock in do_write_index, 2017-04-26).
Drop `CLOSE_LOCK` and make it explicit that `write_locked_index()`
always closes the lock. Whether it is also committed is governed by the
remaining flag, `COMMIT_LOCK`.
This means we neither have nor suggest that we have a mode to write the
index and leave the file open. Whatever extra contents we might
eventually want to write, we should probably write it from within
`write_locked_index()` itself anyway.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `is_expected_rev` & `check_expected_revs` shell function in
C and add a `--check-expected-revs` subcommand to `git bisect--helper` to
call it from git-bisect.sh .
Using `--check-expected-revs` subcommand is a temporary measure to port
shell functions to C so as to use the existing test suite. As more
functions are ported, this subcommand would be retired but its
implementation will be called by some other method.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `bisect_clean_state` shell function in C and add a
`bisect-clean-state` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-clean-state` subcommand is a measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by bisect_reset() and bisect_start().
Also introduce a function `mark_for_removal` to store the refs which
need to be removed while iterating through the refs.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `write_terms` shell function in C and add a `write-terms`
subcommand to `git bisect--helper` to call it from git-bisect.sh . Also
remove the subcommand `--check-term-format` as it can now be called from
inside the function write_terms() C implementation.
Also `|| exit` is added when calling write-terms subcommand from
git-bisect.sh so as to exit whenever there is an error.
Using `--write-terms` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and its implementation will
be called by some other method.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `check_term_format` shell function in C and add
a `--check-term-format` subcommand to `git bisect--helper` to call it
from git-bisect.sh
Using `--check-term-format` subcommand is a temporary measure to port
shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and its
implementation will be called by some other method/subcommand. For
eg. In conversion of write_terms() of git-bisect.sh, the subcommand will
be removed and instead check_term_format() will be called in its C
implementation while a new subcommand will be introduced for write_terms().
Helped-by: Johannes Schindelein <Johannes.Schindelein@gmx.de>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`--next-all` is meant to be used as a subcommand to support multiple
"operation mode" though the current implementation does not contain any
other subcommand along side with `--next-all` but further commits will
include some more subcommands.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two users of `struct apply_state` and the related functionality
in apply.c. Each user sets up its `apply_state` by handing over a
pointer to its static `lock_file`. (Before 076aa2cbd (tempfile:
auto-allocate tempfiles on heap, 2017-09-05), we could never free
lockfiles, so making them static was a reasonable approach.)
Other than that, they never directly access their `lock_file`s, which
are instead handled by the functionality in apply.c.
To make life easier for the caller and to make it less tempting for a
future caller to mess with the lock, make apply.c fully responsible for
setting up the `lock_file`. As mentioned above, it is now safe to free a
`lock_file`, so we can make the `struct apply_state` contain an actual
`struct lock_file` instead of a pointer to one.
The user in builtin/apply.c is rather simple. For builtin/am.c, we might
worry that the lock state is actually meant to be inherited across
calls. But the lock is only taken as `apply_all_patches()` executes, and
code inspection shows that it will always be released.
Alternatively, we can observe that the lock itself is never queried
directly. When we decide whether we should lock, we check a related
variable `newfd`. That variable is not inherited, so from the point of
view of apply.c, the state machine really is reset with each call to
`init_apply_state()`. (It would be a bug if `newfd` and the lock status
were not in sync. The duplication of information in `newfd` and the lock
will be addressed in the next patch.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`newfd` starts out negative. If we then take the lock, `newfd` will
become non-negative. We later check for exactly that property before
calling `write_locked_index()`. That is, we are simply using `newfd` as
a boolean to keep track of whether we took the lock or not. (We always
use `newfd` and `lock_file` together, so they really are mirroring each
other.)
Drop `newfd` and check with `is_lock_file_locked()` instead. While at
it, move the `static struct lock_file` into `cmd_checkout_index()` and
make it non-static. It is only used in this function, and after
076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05), we
can have lockfiles on the stack.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no longer any need to allocate and leak a `struct lock_file`.
The previous patch addressed an instance where we needed a minor tweak
alongside the trivial changes.
Deal with the remaining instances where we allocate and leak a struct
within a single function. Change them to have the `struct lock_file` on
the stack instead.
These instances were identified by running `git grep "^\s*struct
lock_file\s*\*"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/cleanup-strbuf-users:
graph: use strbuf_addchars() to add spaces
use strbuf_addstr() for adding strings to strbufs
path: use strbuf_add_real_path()
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_refdup() if hash is not needed
refs: pass NULL to refs_resolve_refdup() if hash is not needed
Our documentation advises to not re-use a strbuf, after strbuf_release
has been called on it. Use the proper reset instead.
Currently 'strbuf_release' releases and re-initializes the strbuf, so it
is safe, but slow. 'strbuf_reset' only resets the internal length variable,
such that this could also be accounted for as a micro-optimization.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error messages shown when the branch command is misused
by supplying it wrong number of parameters wasn't meaningful.
That's because it used the the phrase "too many branches"
assuming all parameters to be "valid" branch names. It's not
always the case as exemplified below,
$ git branch
foo
* master
$ git branch -m foo foo old
fatal: too many branches for a rename operation
Change the messages to be more general thus making no assumptions
about the "parameters".
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to prevent future mistakes by copying and pasting
code that checks the result of read_in_full() function.
* jk/read-in-full:
worktree: check the result of read_in_full()
worktree: use xsize_t to access file size
distinguish error versus short read from read_in_full()
avoid looking at errno for short read_in_full() returns
prefer "!=" when checking read_in_full() result
notes-merge: drop dead zero-write code
files-backend: prefer "0" for write_in_full() error check
Some commands (most notably "git status") makes an opportunistic
update when performing a read-only operation to help optimize later
operations in the same repository. The new "--no-optional-locks"
option can be passed to Git to disable them.
* jk/no-optional-locks:
git: add --no-optional-locks option
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
Recent versions of "git rev-parse --parseopt" did not parse the
option specification that does not have the optional flags (*=?!)
correctly, which has been corrected.
* bc/rev-parse-parseopt-fix:
parse-options: only insert newline in help text if needed
parse-options: write blank line to correct output stream
t0040,t1502: Demonstrate parse_options bugs
git-rebase: don't ignore unexpected command line arguments
rev-parse parseopt: interpret any whitespace as start of help text
rev-parse parseopt: do not search help text for flag chars
t1502: demonstrate rev-parse --parseopt option mis-parsing
The final batch to "git rebase -i" updates to move more code from
the shell script to C.
* js/rebase-i-final:
rebase -i: rearrange fixup/squash lines using the rebase--helper
t3415: test fixup with wrapped oneline
rebase -i: skip unnecessary picks using the rebase--helper
rebase -i: check for missing commits in the rebase--helper
t3404: relax rebase.missingCommitsCheck tests
rebase -i: also expand/collapse the SHA-1s via the rebase--helper
rebase -i: do not invent onelines when expanding/collapsing SHA-1s
rebase -i: remove useless indentation
rebase -i: generate the script via rebase--helper
t3415: verify that an empty instructionFormat is handled as before
Use strbuf_addstr() instead of strbuf_addf() for adding strings. That's
simpler and makes the intent clearer.
Patch generated by Coccinelle and contrib/coccinelle/strbuf.cocci;
adjusted indentation in refs/packed-backend.c manually.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some UNLEAKs where we are about to return from `cmd_*`. UNLEAK the
variables in the same order as we've declared them. While addressing
`msg` in builtin/tag.c, convert the existing `strbuf_release()` calls as
well.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce function get_submodule_displaypath() to replace the code
occurring in submodule_init() for generating displaypath of the
submodule with a call to it.
This new function will also be used in other parts of the system
in later patches.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify mru.[ch] and related code by reusing the double-linked list
implementation from list.h instead of a custom one.
This commit is an intermediate step. Our final goal is to get rid of
mru.[ch] at all and inline all logic.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of several write-only variables.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support in update-index to manually add/remove the fsmonitor
extension via --[no-]fsmonitor flags.
Add support in update-index to manually set/clear the fsmonitor
valid bit via --[no-]fsmonitor-valid flags.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command line option (-f) to ls-files to have it use lowercase
letters for 'fsmonitor valid' files
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
"git describe --match <pattern>" has been taught to play well with
the "--all" option.
* mk/describe-match-with-all:
describe: teach --match to handle branches and remotes
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_ref_unsafe() if hash is not needed
refs: pass NULL to refs_resolve_ref_unsafe() if hash is not needed
refs: make sha1 output parameter of refs_resolve_ref_unsafe() optional
Many codepaths have been updated to squelch -Wimplicit-fallthrough
warnings from Gcc 7 (which is a good code hygiene).
* jk/fallthrough:
consistently use "fallthrough" comments in switches
curl_trace(): eliminate switch fallthrough
test-line-buffer: simplify command parsing
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
Some tools like IDEs or fancy editors may periodically run
commands like "git status" in the background to keep track
of the state of the repository. Some of these commands may
refresh the index and write out the result in an
opportunistic way: if they can get the index lock, then they
update the on-disk index with any updates they find. And if
not, then their in-core refresh is lost and just has to be
recomputed by the next caller.
But taking the index lock may conflict with other operations
in the repository. Especially ones that the user is doing
themselves, which _aren't_ opportunistic. In other words,
"git status" knows how to back off when somebody else is
holding the lock, but other commands don't know that status
would be happy to drop the lock if somebody else wanted it.
There are a couple possible solutions:
1. Have some kind of "pseudo-lock" that allows other
commands to tell status that they want the lock.
This is likely to be complicated and error-prone to
implement (and maybe even impossible with just
dotlocks to work from, as it requires some
inter-process communication).
2. Avoid background runs of commands like "git status"
that want to do opportunistic updates, preferring
instead plumbing like diff-files, etc.
This is awkward for a couple of reasons. One is that
"status --porcelain" reports a lot more about the
repository state than is available from individual
plumbing commands. And two is that we actually _do_
want to see the refreshed index. We just don't want to
take a lock or write out the result. Whereas commands
like diff-files expect us to refresh the index
separately and write it to disk so that they can depend
on the result. But that write is exactly what we're
trying to avoid.
3. Ask "status" not to lock or write the index.
This is easy to implement. The big downside is that any
work done in refreshing the index for such a call is
lost when the process exits. So a background process
may end up re-hashing a changed file multiple times
until the user runs a command that does an index
refresh themselves.
This patch implements the option 3. The idea (and the test)
is largely stolen from a Git for Windows patch by Johannes
Schindelin, 67e5ce7f63 (status: offer *not* to lock the
index and update it, 2016-08-12). The twist here is that
instead of making this an option to "git status", it becomes
a "git" option and matching environment variable.
The reason there is two-fold:
1. An environment variable is carried through to
sub-processes. And whether an invocation is a
background process or not should apply to the whole
process tree. So you could do "git --no-optional-locks
foo", and if "foo" is a script or alias that calls
"status", you'll still get the effect.
2. There may be other programs that want the same
treatment.
I've punted here on finding more callers to convert,
since "status" is the obvious one to call as a repeated
background job. But "git diff"'s opportunistic refresh
of the index may be a good candidate.
The test is taken from 67e5ce7f63, and it's worth repeating
Johannes's explanation:
Note that the regression test added in this commit does
not *really* verify that no index.lock file was written;
that test is not possible in a portable way. Instead, we
verify that .git/index is rewritten *only* when `git
status` is run without `--no-optional-locks`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to read "len" bytes into a buffer and just assume
that it happened correctly. In practice this should usually
be the case, since we just stat'd the file to get the
length. But we could be fooled by transient errors or by
other processes racily truncating the file.
Let's be more careful. There's a slim chance this could
catch a real error, but it also prevents people and tools
from getting worried while reading the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To read the "gitdir" file into memory, we stat the file and
allocate a buffer. But we store the size in an "int", which
may be truncated. We should use a size_t and xsize_t(),
which will detect truncation.
An overflow is unlikely for a "gitdir" file, but it's a good
practice to model.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers of read_in_full() expect to see the exact
number of bytes requested, but their error handling lumps
together true read errors and short reads due to unexpected
EOF.
We can give more specific error messages by separating these
cases (showing errno when appropriate, and otherwise
describing the short read).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comparing the result of read_in_full() using less-than is
potentially dangerous, as a negative return value may be
converted to an unsigned type and be considered a success.
This is discussed further in 561598cfcf (read_pack_header:
handle signed/unsigned comparison in read result,
2017-09-13).
Each of these instances is actually fine in practice:
- in get-tar-commit-id, the HEADERSIZE macro expands to a
signed integer. If it were switched to an unsigned type
(e.g., a size_t), then it would be a bug.
- the other two callers check for a short read only after
handling a negative return separately. This is a fine
practice, but we'd prefer to model "!=" as a general
rule.
So all of these cases can be considered cleanups and not
actual bugfixes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse" learned "--is-shallow-repository", that is to be
used in a way similar to existing "--is-bare-repository" and
friends.
* ow/rev-parse-is-shallow-repo:
rev-parse: rev-parse: add --is-shallow-repository
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Step #0 of a planned & larger series to make the in-core object
store per in-core repository object.
* jn/per-repo-object-store-fixes:
replace-objects: evaluate replacement refs without using the object store
push, fetch: error out for submodule entries not pointing to commits
pack: make packed_git_mru global a value instead of a pointer
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
At times, it makes sense to avoid the cost of writing out the index
when the only changes can easily be recomputed on demand. This causes
problems when trying to write test cases to verify that state as they
can't guarantee the state has been persisted to disk.
Add a new option (--force-write-index) to update-index that will
ensure the index is written out even if the cache_changed flag is not
set.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a couple of places, we pop objects off an object array `foo` by
decreasing `foo.nr`. We access `foo.nr` in many places, but most if not
all other times we do so read-only, e.g., as we iterate over the array.
But when we change `foo.nr` behind the array's back, it feels a bit
nasty and looks like it might leak memory.
Leaks happen if the popped element has an allocated `name` or `path`.
At the moment, that is not the case. Still, 1) the object array might
gain more fields that want to be freed, 2) a code path where we pop
might start using names or paths, 3) one of these code paths might be
copied to somewhere where we do, and 4) using a dedicated function for
popping is conceptually cleaner.
Introduce and use `object_array_pop()` instead. Release memory in the
new function. Document that popping an object leaves the associated
elements in limbo.
The converted places were identified by grepping for "\.nr\>" and
looking for "--".
Make the new function return NULL on an empty array. This is consistent
with `pop_commit()` and allows the following:
while ((o = object_array_pop(&foo)) != NULL) {
// do something
}
But as noted above, we don't need to go out of our way to avoid reading
`foo.nr`. This is probably more readable:
while (foo.nr) {
... o = object_array_pop(&foo);
// do something
}
The name of `object_array_pop()` does not quite align with
`add_object_array()`. That is unfortunate. On the other hand, it matches
`object_array_clear()`. Arguably it's `add_...` that is the odd one out,
since it reads like it's used to "add" an "object array". For that
reason, side with `object_array_clear()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of freeing `foo.objects` for an object array `foo` (sometimes
conditionally), call `object_array_clear(&foo)`. This means we don't
poke as much into the implementation, which is already a good thing, but
also that we release the individual entries as well, thereby fixing at
least one memory-leak (in diff-lib.c).
If someone is holding on to a pointer to an element's `name` or `path`,
that is now a dangling pointer, i.e., we'd be turning an unpleasant
situation into an outright bug. To the best of my understanding no such
long-term pointers are being taken.
The way we handle `study` in builting/reflog.c still looks like it might
leak. That will be addressed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting `leak_pending = 1` tells `prepare_revision_walk()` not to
release the `pending` array, and makes that the caller's responsibility.
See 4a43d374f (revision: add leak_pending flag, 2011-10-01) and
353f5657a (bisect: use leak_pending flag, 2011-10-01).
Commit 1da1e07c8 (clean up name allocation in prepare_revision_walk,
2014-10-15) fixed a memory leak in `prepare_revision_walk()` by
switching from `free()` to `object_array_clear()`. However, where we use
the `leak_pending`-mechanism, we're still only calling `free()`.
Use `object_array_clear()` instead. Copy some helpful comments from
353f5657a to the other callers that we update to clarify the memory
responsibilities, and to highlight that the commits are not affected
when we clear the array -- it is indeed correct to both tidy up the
commit flags and clear the object array.
Document `leak_pending` in revision.h to help future users get this
right.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Release `pathspec` and the string list `partial`.
When we clear the string list, make sure we do not free the `util`
pointers. That would result in double-freeing, since we set them up as
`item->util = item` in `list_paths()`.
Initialize the string list early, so that we can always release it. That
introduces some unnecessary overhead in various code paths, but means
there is one and only one way out of the function. If we ever accumulate
more things we need to free, it should be straightforward to do so.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new branch B by copying the branch A that happens to
be the current branch, it also updates HEAD to point at the new
branch. It probably was made this way because "git branch -c A B"
piggybacked its implementation on "git branch -m A B",
This does not match the usual expectation. If I were sitting on a
blue chair, and somebody comes and repaints it to red, I would
accept ending up sitting on a chair that is now red (I am also OK to
stand, instead, as there no longer is my favourite blue chair). But
if somebody creates a new red chair, modelling it after the blue
chair I am sitting on, I do not expect to be booted off of the blue
chair and ending up on sitting on the new red one.
Let's fix this before it hits 'next'. Those who want to create a
new branch and switch to it can do "git checkout B" after doing a
"git branch -c B", and if that operation is so useful and deserves a
short-hand way to do so, perhaps extend "git checkout -b B" to copy
configurations while creating the new branch B.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dc944b65f1 (get_sha1_with_context: dynamically
allocate oc->path, 2017-05-19) changed the rules that
callers must follow for seeing if we parsed a path in the
object name. The rules switched from "check if the oc.path
buffer is empty" to "check if the oc.path pointer is NULL".
But that commit forgot to update some sites in
cat_one_file(), meaning we might dereference a NULL pointer.
You can see this by making a path-aware request like
--textconv without specifying --path, and giving an object
name that doesn't have a path in it. Like:
git cat-file --textconv HEAD
which will reliably segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run with the "-C" option, fast-export writes 'C' commands in its
output whenever the internal diff mechanism detects a file copy,
indicating that fast-import should copy the given existing file to the
given new filename. However, the diff mechanism works against the
prior version of the file, whereas fast-import uses whatever is current.
This causes issues when a commit both modifies a file and uses it as the
source for a copy.
Therefore, teach fast-export to refrain from writing 'C' when it has
already written a modification command for a file.
An existing test in t9350-fast-export is also fixed in this patch. The
existing line "C file6 file7" copies the wrong version of file6, but it
has coincidentally worked because file7 was subsequently overridden.
Reported-by: Juraj Oršulić <juraj.orsulic@fer.hr>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git describe` uses `--match`, it matches only tags, basically
ignoring the `--all` argument even when it is specified.
Fix it by also matching branch name and $remote_name/$remote_branch_name,
for remote-tracking references, with the specified patterns. Update
documentation accordingly and add tests.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `git fetch --unshallow` on a repo that is not in fact shallow
produces a fatal error message. Add a helper to rev-parse that scripters
can use to determine whether a repo is shallow or not.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, rev-parse only interprets a space ' ' character as the
delimiter between the option spec and the help text. So if a tab
character is placed between the option spec and the help text, it will
be interpreted as part of the long option name or as part of the arg
hint. If it is interpreted as part of the long option name, then
rev-parse will produce what will be interpreted as multiple arguments
on the command line.
For example, the following option spec (note: there is a <tab> between
"frotz" and "enable"):
frotz enable frotzing
will produce the following set expression when --frotz is used:
set -- --frotz --
instead of this:
set -- --frotz enable --
Mark t1502.2 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When searching for flag characters in the option spec, we should ensure
the search stays within the bounds of the option spec and does not enter
the help text portion of the spec. So when we find the boundary white
space marking the start of the help text, let's mark it with a nul
character. Then when we search for flag characters starting from the
beginning of the string we'll stop at the nul and won't enter the help
text.
Now, the following option spec:
exclame this does something!
will produce this 'set' expression when --exclame is specified:
set -- --exclame --
instead of this one:
set -- --exclame this does something --
Mark t1502.4 and t1502.5 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
Many leaks of strbuf have been fixed.
* rs/strbuf-leakfix: (34 commits)
wt-status: release strbuf after use in wt_longstatus_print_tracking()
wt-status: release strbuf after use in read_rebase_todolist()
vcs-svn: release strbuf after use in end_revision()
utf8: release strbuf on error return in strbuf_utf8_replace()
userdiff: release strbuf after use in userdiff_get_textconv()
transport-helper: release strbuf after use in process_connect_service()
sequencer: release strbuf after use in save_head()
shortlog: release strbuf after use in insert_one_record()
sha1_file: release strbuf on error return in index_path()
send-pack: release strbuf on error return in send_pack()
remote: release strbuf after use in set_url()
remote: release strbuf after use in migrate_file()
remote: release strbuf after use in read_remote_branches()
refs: release strbuf on error return in write_pseudoref()
notes: release strbuf after use in notes_copy_from_stdin()
merge: release strbuf after use in write_merge_heads()
merge: release strbuf after use in save_state()
mailinfo: release strbuf on error return in handle_boundary()
mailinfo: release strbuf after use in handle_from()
help: release strbuf on error return in exec_woman_emacs()
...
As "git commit" to conclude a conflicted "git merge" honors the
commit-msg hook, "git merge" that recoreds a merge commit that
cleanly auto-merges should, but it didn't.
* sb/merge-commit-msg-hook:
builtin/merge: honor commit-msg hook for merges
Many of our programs consider that it is OK to release dynamic
storage that is used throughout the life of the program by simply
exiting, but this makes it harder to leak detection tools to avoid
reporting false positives. Plug many existing leaks and introduce
a mechanism for developers to mark that the region of memory
pointed by a pointer is not lost/leaking to help these tools.
* jk/leak-checkers:
add UNLEAK annotation for reducing leak false positives
set_git_dir: handle feeding gitdir to itself
repository: free fields before overwriting them
reset: free allocated tree buffers
reset: make tree counting less confusing
config: plug user_config leak
update-index: fix cache entry leak in add_one_file()
add: free leaked pathspec after add_files_to_cache()
test-lib: set LSAN_OPTIONS to abort by default
test-lib: --valgrind should not override --verbose-log
"git -c submodule.recurse=yes pull" did not work as if the
"--recurse-submodules" option was given from the command line.
This has been corrected.
* nm/pull-submodule-recurse-config:
pull: honor submodule.recurse config option
pull: fix cli and config option parsing order
Our hashmap implementation in hashmap.[ch] is not thread-safe when
adding a new item needs to expand the hashtable by rehashing; add
an API to disable the automatic rehashing to work it around.
* jh/hashmap-disable-counting:
hashmap: add API to disable item counting when threaded
The long-standing rule that an in-core lockfile instance, once it
is used, must not be freed, has been lifted and the lockfile and
tempfile APIs have been updated to reduce the chance of programming
errors.
* jk/incore-lockfile-removal:
stop leaking lock structs in some simple cases
ref_lock: stop leaking lock_files
lockfile: update lifetime requirements in documentation
tempfile: auto-allocate tempfiles on heap
tempfile: remove deactivated list entries
tempfile: use list.h for linked list
tempfile: release deactivated strbufs instead of resetting
tempfile: robustify cleanup handler
tempfile: factor out deactivation
tempfile: factor out activation
tempfile: replace die("BUG") with BUG()
tempfile: handle NULL tempfile pointers gracefully
tempfile: prefer is_tempfile_active to bare access
lockfile: do not rollback lock on failed close
tempfile: do not delete tempfile on failed close
always check return value of close_tempfile
verify_signed_buffer: prefer close_tempfile() to close()
setup_temporary_shallow: move tempfile struct into function
setup_temporary_shallow: avoid using inactive tempfile
write_index_as_tree: cleanup tempfile on error
Earlier in this codepath, we (ab)used "%<len>c" to read the hostname
recorded in the lockfile into locking_host[HOST_NAME_MAX + 1] while
substituting <len> with the actual value of HOST_NAME_MAX.
This turns out to be incorrect, as it is an instruction to read
exactly the specified number of bytes. Because we are trying to
read at most that many bytes, we should be using "%<len>s" instead.
Helped-by: A. Wilcox <awilfox@adelielinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git describe --match` with multiple patterns matches only first pattern.
If it fails, next patterns are not tried.
Fix it, add test cases and update existing test which has wrong
expectation.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ask to write 41 bytes and make sure that the return value
is at least 41. This is the same "dangerous" pattern that
was fixed in the prior commit (wherein a negative return
value is promoted to unsigned), though it is not dangerous
here because our "41" is a constant, not an unsigned
variable.
But we should convert it anyway to avoid modeling a
dangerous construct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The MRU cache that keeps track of recently used packs is represented
using two global variables:
struct mru packed_git_mru_storage;
struct mru *packed_git_mru = &packed_git_mru_storage;
Callers never assign to the packed_git_mru pointer, though, so we can
simplify by eliminating it and using &packed_git_mru_storage (renamed
to &packed_git_mru) directly. This variable is only used by the
packfile subsystem, making this a relatively uninvasive change (and
any new unadapted callers would trigger a compile error).
Noticed while moving these globals to the object_store struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user tries to use '--help' option on an aliased command
information about the alias is printed as sshown below,
$ git co --help
`git co' is aliased to `checkout'
This doesn't seem correct as the user has aliased only 'co' and not
'git co'. This might even be incorrect in cases in which the user has
used an alias like 'tgit'.
$ tgit co --help
`git co' is aliased to `checkout'
So, make the message more precise.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
If this works out OK, I think there are low-hanging fruits in
other commands like "git branch" that outputs long list in one mode
while taking input in another.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
"git commit-tree -F <file>", unlike "cat <file> | git
commit-tree" (i.e. feeding the same contents from the standard
input), added a missing final newline when the input ended in an
incomplete line.
Correct this inconsistency by leaving the incomplete line as-is,
as erring on the side of not touching the input is preferrable
and expected for a plumbing command like "commit-tree".
Signed-off-by: Ross Kabus <rkabus@aerotech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog command parsed the output of
git-log, and the logic went something like this:
1. Read stdin looking for "author" lines.
2. Parse the identity into its name/email bits.
3. Apply mailmap to the name/email.
4. Reformat the identity into a single buffer that is our
"key" for grouping entries (either a name by default,
or "name <email>" if --email was given).
The first part happens in read_from_stdin(), and the other
three steps are part of insert_one_record().
When we do an internal traversal, we just swap out the stdin
read in step 1 for reading the commit objects ourselves.
Prior to 2db6b83d18 (shortlog: replace hand-parsing of
author with pretty-printer, 2016-01-18), that made sense; we
still had to parse the ident in the commit message.
But after that commit, we use pretty.c's "%an <%ae>" to get
the author ident (for simplicity). Which means that the
pretty printer is doing a parse/format under the hood, and
then we parse the result, apply the mailmap, and format the
result again.
Instead, we can just ask pretty.c to do all of those steps
for us (including the mailmap via "%aN <%aE>", and not
formatting the address when --email is missing).
And then we can push steps 2-4 into read_from_stdin(). This
speeds up "git shortlog -ns" on linux.git by about 3%, and
eliminates a leak in insert_one_record() of the namemailbuf
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common pattern in git commands to allocate some
memory that should last for the lifetime of the program and
then not bother to free it, relying on the OS to throw it
away.
This keeps the code simple, and it's fast (we don't waste
time traversing structures or calling free at the end of the
program). But it also triggers warnings from memory-leak
checkers like valgrind or LSAN. They know that the memory
was still allocated at program exit, but they don't know
_when_ the leaked memory stopped being useful. If it was
early in the program, then it's probably a real and
important leak. But if it was used right up until program
exit, it's not an interesting leak and we'd like to suppress
it so that we can see the real leaks.
This patch introduces an UNLEAK() macro that lets us do so.
To understand its design, let's first look at some of the
alternatives.
Unfortunately the suppression systems offered by
leak-checking tools don't quite do what we want. A
leak-checker basically knows two things:
1. Which blocks were allocated via malloc, and the
callstack during the allocation.
2. Which blocks were left un-freed at the end of the
program (and which are unreachable, but more on that
later).
Their suppressions work by mentioning the function or
callstack of a particular allocation, and marking it as OK
to leak. So imagine you have code like this:
int cmd_foo(...)
{
/* this allocates some memory */
char *p = some_function();
printf("%s", p);
return 0;
}
You can say "ignore allocations from some_function(),
they're not leaks". But that's not right. That function may
be called elsewhere, too, and we would potentially want to
know about those leaks.
So you can say "ignore the callstack when main calls
some_function". That works, but your annotations are
brittle. In this case it's only two functions, but you can
imagine that the actual allocation is much deeper. If any of
the intermediate code changes, you have to update the
suppression.
What we _really_ want to say is that "the value assigned to
p at the end of the function is not a real leak". But
leak-checkers can't understand that; they don't know about
"p" in the first place.
However, we can do something a little bit tricky if we make
some assumptions about how leak-checkers work. They
generally don't just report all un-freed blocks. That would
report even globals which are still accessible when the
leak-check is run. Instead they take some set of memory
(like BSS) as a root and mark it as "reachable". Then they
scan the reachable blocks for anything that looks like a
pointer to a malloc'd block, and consider that block
reachable. And then they scan those blocks, and so on,
transitively marking anything reachable from a global as
"not leaked" (or at least leaked in a different category).
So we can mark the value of "p" as reachable by putting it
into a variable with program lifetime. One way to do that is
to just mark "p" as static. But that actually affects the
run-time behavior if the function is called twice (you
aren't likely to call main() twice, but some of our cmd_*()
functions are called from other commands).
Instead, we can trick the leak-checker by putting the value
into _any_ reachable bytes. This patch keeps a global
linked-list of bytes copied from "unleaked" variables. That
list is reachable even at program exit, which confers
recursive reachability on whatever values we unleak.
In other words, you can do:
int cmd_foo(...)
{
char *p = some_function();
printf("%s", p);
UNLEAK(p);
return 0;
}
to annotate "p" and suppress the leak report.
But wait, couldn't we just say "free(p)"? In this toy
example, yes. But UNLEAK()'s byte-copying strategy has
several advantages over actually freeing the memory:
1. It's recursive across structures. In many cases our "p"
is not just a pointer, but a complex struct whose
fields may have been allocated by a sub-function. And
in some cases (e.g., dir_struct) we don't even have a
function which knows how to free all of the struct
members.
By marking the struct itself as reachable, that confers
reachability on any pointers it contains (including those
found in embedded structs, or reachable by walking
heap blocks recursively.
2. It works on cases where we're not sure if the value is
allocated or not. For example:
char *p = argc > 1 ? argv[1] : some_function();
It's safe to use UNLEAK(p) here, because it's not
freeing any memory. In the case that we're pointing to
argv here, the reachability checker will just ignore
our bytes.
3. Likewise, it works even if the variable has _already_
been freed. We're just copying the pointer bytes. If
the block has been freed, the leak-checker will skip
over those bytes as uninteresting.
4. Because it's not actually freeing memory, you can
UNLEAK() before we are finished accessing the variable.
This is helpful in cases like this:
char *p = some_function();
return another_function(p);
Writing this with free() requires:
int ret;
char *p = some_function();
ret = another_function(p);
free(p);
return ret;
But with unleak we can just write:
char *p = some_function();
UNLEAK(p);
return another_function(p);
This patch adds the UNLEAK() macro and enables it
automatically when Git is compiled with SANITIZE=leak. In
normal builds it's a noop, so we pay no runtime cost.
It also adds some UNLEAK() annotations to show off how the
feature works. On top of other recent leak fixes, these are
enough to get t0000 and t0001 to pass when compiled with
LSAN.
Note the case in commit.c which actually converts a
strbuf_release() into an UNLEAK. This code was already
non-leaky, but the free didn't do anything useful, since
we're exiting. Converting it to an annotation means that
non-leak-checking builds pay no runtime cost. The cost is
minimal enough that it's probably not worth going on a
crusade to convert these kinds of frees to UNLEAKS. I did it
here for consistency with the "sb" leak (though it would
have been equally correct to go the other way, and turn them
both into strbuf_release() calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to 65969d43d1 (merge: honor prepare-commit-msg hook, 2011-02-14)
merge should also honor the commit-msg hook: When a merge is stopped due
to conflicts or --no-commit, the subsequent commit calls the commit-msg
hook. However, it is not called after a clean merge. Fix this
inconsistency by invoking the hook after clean merges as well.
This change is motivated by Gerrit's commit-msg hook to install a ChangeId
trailer into the commit message. Without such a ChangeId, Gerrit refuses
to accept any commit by default, such that the inconsistency of (not)
running the commit-msg hook between commit and merge leads to confusion
and might block people from getting their work done.
As the githooks man page is very vocal about the possibility of skipping
the commit-msg hook via the --no-verify option, implement the option
in merge, too.
'git merge --continue' is currently implemented as calling cmd_commit
with no further arguments. This works for most other merge related options,
such as demonstrated via the --allow-unrelated-histories flag in the
test. The --no-verify option however is not remembered across invocations
of git-merge. Originally the author assumed an alternative in which the
'git merge --continue' command accepts the --no-verify flag, but that
opens up the discussion which flags are allows to the continued merge
command and which must be given in the first invocation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" supports a --recurse-submodules option but does not parse the
submodule.recurse configuration item to set the default for that option.
Meanwhile "git fetch" does support submodule.recurse, producing
confusing behavior: when submodule.recurse is enabled, "git pull"
recursively fetches submodules but does not update them after fetch.
Handle submodule.recurse in "git pull" to fix this.
Reported-by: Magnus Homann <magnus@homann.se>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull parses first the cli options and then the config option.
The expected behavior is the other way around, so that config
options can not override the cli ones.
This patch changes the parsing order so config options are
parsed first.
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to address concerns raised by ThreadSanitizer on the mailing list
about threaded unprotected R/W access to map.size with my previous "disallow
rehash" change (0607e10009).
See:
https://public-inbox.org/git/adb37b70139fd1e2bac18bfd22c8b96683ae18eb.1502780344.git.martin.agren@gmail.com/
Add API to hashmap to disable item counting and thus automatic rehashing.
Also include API to later re-enable them.
When item counting is disabled, the map.size field is invalid. So to
prevent accidents, the field has been renamed and an accessor function
hashmap_get_size() has been added. All direct references to this
field have been been updated. And the name of the field changed
to map.private_size to communicate this.
Here is the relevant output from ThreadSanitizer showing the problem:
WARNING: ThreadSanitizer: data race (pid=10554)
Read of size 4 at 0x00000082d488 by thread T2 (mutexes: write M16):
#0 hashmap_add hashmap.c:209
#1 hash_dir_entry_with_parent_and_prefix name-hash.c:302
#2 handle_range_dir name-hash.c:347
#3 handle_range_1 name-hash.c:415
#4 lazy_dir_thread_proc name-hash.c:471
#5 <null> <null>
Previous write of size 4 at 0x00000082d488 by thread T1 (mutexes: write M31):
#0 hashmap_add hashmap.c:209
#1 hash_dir_entry_with_parent_and_prefix name-hash.c:302
#2 handle_range_dir name-hash.c:347
#3 handle_range_1 name-hash.c:415
#4 handle_range_dir name-hash.c:380
#5 handle_range_1 name-hash.c:415
#6 lazy_dir_thread_proc name-hash.c:471
#7 <null> <null>
Martin gives instructions for running TSan on test t3008 in this post:
https://public-inbox.org/git/CAN0heSoJDL9pWELD6ciLTmWf-a=oyxe4EXXOmCKvsG5MSuzxsA@mail.gmail.com/
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't reset the strbufs l2 and l3 before use as if they were static, but
release them at the end instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using for_each_ref_in() with a full refname has always been
a questionable practice, but it became an error with
b9c8e7f2fb (prefix_ref_iterator: don't trim too much,
2017-05-22), making "git rev-parse --bisect" pretty reliably
show a BUG.
Commit 03df567fbf (for_each_bisect_ref(): don't trim
refnames, 2017-06-18) fixed this case for revision.c, but
rev-parse handles this option on its own. We can use the
same solution here (and piggy-back on its test).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read the tree objects with fill_tree_descriptor(), but
never actually free the resulting buffers, causing a memory
leak. This isn't a huge deal because we call this code at
most twice per program invocation. But it does potentially
double our heap usage if you have large root trees. Let's
free the trees before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on whether we're in --keep mode, git-reset may
feed one or two trees to unpack_trees(). We start a counter
at "1" and then increment it to "2" only for the two-tree
case. But that means we must always subtract one to find the
correct array slot to fill with each descriptor.
Instead, let's start at "0" and just increment our counter
after adding each tree. This skips the extra subtraction,
and will make things much easier when we start to actually
free our tree buffers.
While we're at it, let's make the first allocation use the
slot at "desc + nr", too, even though we know "nr" is 0 at
that point. It makes the two fill_tree_descriptor() calls
consistent (always "desc + nr", followed by always
incrementing "nr").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generate filenames for the user_config ("~/.gitconfig")
and the xdg config ("$XDG_CONFIG_HOME/git/config") and then
decide which to use by looking at the filesystem. But after
selecting one, the unused string is just leaked.
This is a tiny leak, but it creates noise in leak-checker
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to add the cache entry to the index, we end up
just leaking the struct. We should follow the pattern of the
early-return above and free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After run_diff_files, we throw away the rev_info struct,
including the pathspec that we copied into it, leaking the
memory. this is probably not a big deal in practice. We
usually only run this once per process, and the leak is
proportional to the pathspec list we're already holding in
memory.
But it's still a leak, and it pollutes leak-checker output,
making it harder to find important leaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that it's safe to declare a "struct lock_file" on the
stack, we can do so (and avoid an intentional leak). These
leaks were found by running t0000 and t0001 under valgrind
(though certainly other similar leaks exist and just don't
happen to be exercised by those tests).
Initializing the lock_file's inner tempfile with NULL is not
strictly necessary in these cases, but it's a good practice
to model. It means that if we were to call a function like
rollback_lock_file() on a lock that was never taken in the
first place, it becomes a quiet noop (rather than undefined
behavior).
Likewise, it's always safe to rollback_lock_file() on a file
that has already been committed or deleted, since that
operation is a noop on an inactive lockfile (and that's why
the case in config.c can drop the "if (lock)" check as we
move away from using a pointer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the tempfile code to give up
ownership over tempfiles that have been renamed or deleted.
That makes it possible to use a stack variable like this:
struct tempfile t;
create_tempfile(&t, ...);
...
if (!err)
rename_tempfile(&t, ...);
else
delete_tempfile(&t);
But doing it this way has a high potential for creating
memory errors. The tempfile we pass to create_tempfile()
ends up on a global linked list, and it's not safe for it to
go out of scope until we've called one of those two
deactivation functions.
Imagine that we add an early return from the function that
forgets to call delete_tempfile(). With a static or heap
tempfile variable, the worst case is that the tempfile hangs
around until the program exits (and some functions like
setup_shallow_temporary rely on this intentionally, creating
a tempfile and then leaving it for later cleanup).
But with a stack variable as above, this is a serious memory
error: the variable goes out of scope and may be filled with
garbage by the time the tempfile code looks at it. Let's
see if we can make it harder to get this wrong.
Since many callers need to allocate arbitrary numbers of
tempfiles, we can't rely on static storage as a general
solution. So we need to turn to the heap. We could just ask
all callers to pass us a heap variable, but that puts the
burden on them to call free() at the right time.
Instead, let's have the tempfile code handle the heap
allocation _and_ the deallocation (when the tempfile is
deactivated and removed from the list).
This changes the return value of all of the creation
functions. For the cleanup functions (delete and rename),
we'll add one extra bit of safety: instead of taking a
tempfile pointer, we'll take a pointer-to-pointer and set it
to NULL after freeing the object. This makes it safe to
double-call functions like delete_tempfile(), as the second
call treats the NULL input as a noop. Several callsites
follow this pattern.
The resulting patch does have a fair bit of noise, as each
caller needs to be converted to handle:
1. Storing a pointer instead of the struct itself.
2. Passing the pointer instead of taking the struct
address.
3. Handling a "struct tempfile *" return instead of a file
descriptor.
We could play games to make this less noisy. For example, by
defining the tempfile like this:
struct tempfile {
struct heap_allocated_part_of_tempfile {
int fd;
...etc
} *actual_data;
}
Callers would continue to have a "struct tempfile", and it
would be "active" only when the inner pointer was non-NULL.
But that just makes things more awkward in the long run.
There aren't that many callers, so we can simply bite
the bullet and adjust all of them. And the compiler makes it
easy for us to find them all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues; this is to
ensure that we do not assume sizeof(struct object_id) is the same
as the length of SHA-1 hash (or length of longest hash we support).
* po/read-graft-line:
commit: rewrite read_graft_line
commit: allocate array using object_id size
commit: replace the raw buffer with strbuf in read_graft_line
sha1_file: fix definition of null_sha1
"branch --set-upstream" that has been deprecated in Git 1.8 has
finally been retired.
* ks/branch-set-upstream:
branch: quote branch/ref names to improve readability
builtin/branch: stop supporting the "--set-upstream" option
t3200: cleanup cruft of a test
Earlier, dddbad728c ("timestamp_t: a new data type for timestamps",
2017-04-26) changed several types to timestamp_t.
5589e87fd8 ("name-rev: change a "long" variable to timestamp_t",
2017-05-20) cleaned up a missed variable, but both missed a _MAX
constant.
Change the remaining constant to the one appropriate for the current
type
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
"git interpret-trailers" learned to take the trailer specifications
from the command line that overrides the configured values.
* pb/trailers-from-command-line:
interpret-trailers: fix documentation typo
interpret-trailers: add options for actions
trailers: introduce struct new_trailer_item
trailers: export action enums and corresponding lookup functions
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_packed_git() in packfile.c is duplicated from sha1_file.c. In a
subsequent commit, alloc_packed_git() will be removed from sha1_file.c.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, sha1_file.c and cache.h contain many functions, both related
to and unrelated to packfiles. This makes both files very large and
causes an unclear separation of concerns.
Create a new file, packfile.c, to hold all packfile-related functions
currently in sha1_file.c. It has a corresponding header packfile.h.
In this commit, the pack name-related functions are moved. Subsequent
commits will move the other functions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
"git commit" used to discard the index and re-read from the filesystem
just in case the pre-commit hook has updated it in the middle; this
has been optimized out when we know we do not run the pre-commit hook.
* kw/commit-keep-index-when-pre-commit-is-not-run:
commit: skip discarding the index if there is no pre-commit hook
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking the conditional of "while (me->remaining)", we did not
hold the lock. Calling find_deltas would still be safe, since it checks
"remaining" (after taking the lock) and is able to handle all values. In
fact, this could (currently) not trigger any bug: a bug could happen if
`remaining` transitioning from zero to non-zero races with the evaluation
of the while-condition, but these are always separated by the
data_ready-mechanism.
Make sure we have the lock when we read `remaining`. This does mean we
release it just so that find_deltas can take it immediately again. We
could tweak the contract so that the lock should be taken before calling
find_deltas, but let's defer that until someone can actually show that
"unlock+lock" has a measurable negative impact.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Code clean-up.
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies function declaration and allows for use of strbuf_rtrim
instead of modifying buffer directly.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--set-upstream' option of branch was deprecated in b347d06b
("branch: deprecate --set-upstream and show help if we detect
possible mistaken use", 2012-08-30) and has been planned for removal
ever since.
In order to prevent "--set-upstream" on a command line from being taken as
an abbreviated form of "--set-upstream-to", explicitly catch "--set-upstream"
option and die, instead of just removing it from the list of options.
Before this change, an attempt to use "--set-upstream" resulted in:
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
With this change, the behaviour becomes like this:
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is not a pre-commit hook, there is no reason to discard
the index and reread it.
This change checks to presence of a pre-commit hook and then only
discards the index if there was one.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last few commits have added command line options that
can turn interpret-trailers into a parsing tool. Since
they'd most often be used together, let's provide a
convenient single option for callers to invoke this mode.
This is implemented as a callback rather than a boolean so
that its effect is applied immediately, as if those options
had been specified. Later options can then override them.
E.g.:
git interpret-trailers --parse --no-unfold
would work.
Let's also update the documentation to make clear that this
parsing mode behaves quite differently than the normal
"add trailers to the input" mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of "--only-trailers" is to give a caller an output
that's easy for them to parse. Getting rid of the
non-trailer material helps, but we still may see more
complicated syntax like whitespace continuation. Let's add
an option to unfold any continuation, giving the output as a
single "key: value" line per trailer.
As a bonus, this could be used even without --only-trailers
to clean up unusual formatting in the incoming data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to invoke interpret-trailers for the
primary purpose of parsing existing trailers. But in that
case, we don't want to apply existing ifMissing or ifExists
rules from the config. Let's add a special mode where we
avoid applying those rules. Coupled with --only-trailers,
this gives us a reasonable parsing tool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it's easy for any reader who wants to parse
trailers to do so. But there are a lot of subtle corner
cases around what counts as a trailer, when the trailer
block begins and ends, etc. Since interpret-trailers already
has our parsing logic, let's let callers ask it to just
output the trailers.
They still have to parse the "key: value" lines, but at
least they can ignore all of the other corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating patches for the rebase command, if the user does
not realize the branch they are rebasing onto is thousands of
commits different, there is no progress indication after initial
rewinding message.
The progress meter as presented in this patch assumes the thousands of
patches to have a fine granularity as well as assuming to require all
the same amount of work/time for each, such that a steady progress bar
is achieved.
We do not want to estimate the time for each patch based e.g.
on their size or number of touched files (or parents) as that is too
expensive for just a progress meter.
This patch allows a progress option to be passed to format-patch
so that the user can be informed the progress of generating the
patch. This option is then used by the rebase command when
calling format-patch.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow using non-default values for trailers without having to set
them up in .gitconfig first. For example, if you have the following
configuration
trailer.signed-off-by.where = end
you may use "--where before" when a patch author forgets his
Signed-off-by and provides it in a separate email. Likewise for
--if-exists and --if-missing
Reverting to the behavior specified by .gitconfig is done with
--no-where, --no-if-exists and --no-if-missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will provide a place to store the current state of the
--where, --if-exists and --if-missing options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Many uses of comparision callback function the hashmap API uses
cast the callback function type when registering it to
hashmap_init(), which defeats the compile time type checking when
the callback interface changes (e.g. gaining more parameters).
The callback implementations have been updated to take "void *"
pointers and cast them to the type they expect instead.
* sb/hashmap-cleanup:
t/helper/test-hashmap: use custom data instead of duplicate cmp functions
name-hash.c: drop hashmap_cmp_fn cast
submodule-config.c: drop hashmap_cmp_fn cast
remote.c: drop hashmap_cmp_fn cast
patch-ids.c: drop hashmap_cmp_fn cast
convert/sub-process: drop cast to hashmap_cmp_fn
config.c: drop hashmap_cmp_fn cast
builtin/describe: drop hashmap_cmp_fn cast
builtin/difftool.c: drop hashmap_cmp_fn cast
attr.c: drop hashmap_cmp_fn cast
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
The filter-process interface learned to allow a process with long
latency give a "delayed" response.
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Start using selected c99 constructs in small, stable and
essentialpart of the system to catch people who care about
older compilers that do not grok them.
* jk/c99:
clean.c: use designated initializer
strbuf: use designated initializers in STRBUF_INIT
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
Conversion from uchar[20] to struct object_id continues.
* sb/object-id:
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
Move the code for releasing tree buffers and commit buffers in
fsck_obj() to the end of the function and make sure it's executed no
matter of an error is encountered or not.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of a magic string length constant by using skip_prefix() instead
of starts_with().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have two options and are about to add a few more.
To avoid having a huge number of boolean arguments, let's
convert to an options struct which can be passed in.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to adding the missing newline, add the x-ecutable bit
'mode change' character to the error message. This message now has
the same form as similar messages output by 'update-index'.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only difference between these is that the former takes an argument
`name` which it ignores completely. Still, the callers are quite careful
to provide reasonable values for it.
Once in-flight topics have landed, we should be able to remove
git_config_maybe_bool. In the meantime, document it as deprecated in the
technical documentation. While at it, document git_parse_maybe_bool.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to use the submodule-config subsystem, callers first need to
initialize it by calling 'repo_read_gitmodules()' or
'gitmodules_config()' (which just redirects to
'repo_read_gitmodules()'). There are a couple of callers who need to
load an explicit revision of the repository's .gitmodules file (grep) or
need to modify the .gitmodules file so they would need to load it before
modify the file (checkout), but the majority of callers are simply
reading the .gitmodules file present in the working tree. For the
common case it would be nice to avoid the boilerplate of initializing
the submodule-config system before using it, so instead let's perform
lazy-loading of the submodule-config system.
Remove the calls to reading the gitmodules file from ls-files to show
that lazy-loading the .gitmodules file works.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the functions used to initialize the submodule-config to
submodule-config.c so that the callback routine used in the
initialization process can be static and prevent it from being used
outside of initializing the submodule-config through the main API.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last remaining caller of 'submodule_config()' as well as the
function itself.
With 'submodule_config()' being removed the submodule-config API can be
a little simpler as callers don't need to worry about whether or not
they need to overlay the repository's config on top of the
submodule-config. This also makes it more difficult to accidentally
add non-submodule specific configuration to the .gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'submodule.update' config was historically used and respected by the
'submodule update' command because update handled a variety of different
ways it updated a submodule. As we begin teaching other commands about
submodules it makes more sense for the different settings of
'submodule.update' to be handled by the individual commands themselves
(checkout, rebase, merge, etc) so it shouldn't be respected by the
native checkout command.
Also remove the overlaying of the repository's config (via using
'submodule_config()') from the commands which use the unpack-trees
logic (checkout, read-tree, reset).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
fetch_recurse field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
url and the update strategy configuration.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
branch field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save the rerere-autoupdate setting so that it is remembered after
stopping for the user to resolve conflicts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit aee9c7d65 (Submodules: Add the new "ignore" config option for
diff and status) introduced the ignore configuration option for
submodules so that configured submodules could be omitted from the
status and diff commands. Because this flag is respected in the diff
machinery it has the unintended consequence of potentially prohibiting
users from adding or resetting a submodule, even when a path to the
submodule is explicitly given.
Ensure that submodules can be added or set, even if they are configured
to be ignored, by setting the `DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG` diff
flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'is_staging_gitmodules_ok()' to be able to determine in the
'.gitmodules' file has unstaged changes based on the passed in index
instead of relying on a global variable which is set during the
submodule-config parsing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'fetch.recursesubmodules' configuration option from the
general submodule-config parsing and instead rely on using
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '.gitmodules' file should only contain information pertinent to
configuring individual submodules (name to path mapping, URL where to
obtain the submodule, etc.) while other configuration like the number of
jobs to use when fetching submodules should be a part of the
repository's config.
Remove the 'submodule.fetchjobs' configuration option from the general
submodule-config parsing and instead rely on using the
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Note: The original code did not try to skip unnecessary picks of root
commits but punts instead (probably --root was not considered common
enough of a use case to bother optimizing). We do the same, for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is crucial to improve performance on Windows, as the speed is now
mostly dominated by the SHA-1 transformation (because it spawns a new
rev-parse process for *every* line, and spawning processes is pretty
slow from Git for Windows' MSYS2 Bash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first step of an interactive rebase is to generate the so-called "todo
script", to be stored in the state directory as "git-rebase-todo" and to
be edited by the user.
Originally, we adjusted the output of `git log <options>` using a simple
sed script. Over the course of the years, the code became more
complicated. We now use shell scripting to edit the output of `git log`
conditionally, depending whether to keep "empty" commits (i.e. commits
that do not change any files).
On platforms where shell scripting is not native, this can be a serious
drag. And it opens the door for incompatibilities between platforms when
it comes to shell scripting or to Unix-y commands.
Let's just re-implement the todo script generation in plain C, using the
revision machinery directly.
This is substantially faster, improving the speed relative to the
shell script version of the interactive rebase from 2x to 3x on Windows.
Note that the rearrange_squash() function in git-rebase--interactive
relied on the fact that we set the "format" variable to the config setting
rebase.instructionFormat. Relying on a side effect like this is no good,
hence we explicitly perform that assignment (possibly again) in
rearrange_squash().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Remove the unused variable "heads" from cmd_fsck().
This variable was made unused in commit c3271a0 ("fsck: do not fallback
"git fsck <bogus>" to "git fsck"", 2017-01-17).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects require every commit, even merges, to be signed off
[*1*]. Because "git merge" does not have a "--signoff" option like
"git commit" does, the user needs to add one manually when the
command presents an editor to describe the merge, or later use "git
commit --amend --signoff".
Help developers of these projects by teaching "--signoff" option to
"git merge".
*1* https://public-inbox.org/git/CAHv71zK5SqbwrBFX=a8-DY9H3KT4FEyMgv__p2gZzNr0WUAPUw@mail.gmail.com/T/#u
Requested-by: Dan Kohn <dan@linuxfoundation.org>
Signed-off-by: Łukasz Gryglicki <lukaszgryglicki@o2.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Align argument list and place opening brace on its own line.
Signed-off-by: Dimitrios Christidis <dimitrios@christidis.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "used" field in struct object is only used by builtin/fsck. Remove
that field and modify builtin/fsck to use a flag instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If obj->type == OBJ_TREE, an invocation of fsck_walk() will invoke
parse_tree() and return quickly if that returns nonzero, so it is of no
use for traverse_one_object() to invoke parse_tree() in this situation
before invoking fsck_walk(). Remove that code.
The behavior of traverse_one_object() is changed slightly in that it now
returns -1 instead of 1 in the case that parse_tree() fails, but this is
not an issue because its only caller (traverse_reachable) does not care
about the value as long as it is nonzero.
This code was introduced in commit 271b8d2 ("builtin-fsck: move away
from object-refs to fsck_walk", 2008-02-25). The same issue existed in
that commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If done_pbase_paths is NULL then done_pbase_paths_num must be zero and
done_pbase_path_pos() returns -1 without accessing the array, so the
check is not necessary.
If the invariant was violated then the check would make sure we keep
on going and allocate the necessary amount of memory in the next
ALLOC_GROW call. That sounds nice, but all array entries except for
one would contain garbage data.
If the invariant was violated without the check we'd get a segfault in
done_pbase_path_pos(), i.e. an observable crash, alerting us of the
presence of a bug.
Currently there is no such bug: Only the functions check_pbase_path()
and cleanup_preferred_base() change pointer and counter, and both make
sure to keep them in sync. Get rid of the check anyway to allow us to
see if later changes introduce such a defect, and to simplify the code.
Detected by Coverity Scan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
This is another test balloon to see if we get complaints from people
whose compilers do not support designated initializer for arrays.
The use of the feature is not all that interesting for cases like
the one this patch touches, where the initialized elements of the
array is dense, but it would be nice if we can use the feature to
initialize an array that has elements initialized to interesting
values only sparsely.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check for whether the template given to 'git commit' is untouched
is done before the empty message check. This results in a wrong error
message being displayed in the following case. When the user removes
everything in template completely to abort the commit he is shown the
"template untouched" error which is wrong. He should be shown the
"empty message" error.
Do the empty message check before checking for an untouched template
thus fixing this issue.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit early when asked to prune an index that contains no entries to
begin with. This avoids pointer arithmetic on istate->cache, which is
possibly NULL in that case.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the code for moving members inside of an array and make it more
robust by using the helper macro MOVE_ARRAY. It calculates the size
based on the specified number of elements for us and supports NULL
pointers when that number is zero. Raw memmove(3) calls with NULL can
cause the compiler to (over-eagerly) optimize out later NULL checks.
This patch was generated with contrib/coccinelle/array.cocci and spatch
(Coccinelle).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set old_oid to NULL if we found out that it's a corrupt reference.
In that case don't try to access the hash member and pass NULL to
ref_transaction_delete() instead.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if note is NULL, as we already do for different purposes a few
lines above, and pass a NULL pointer to prepare_note_data() in that
case instead of trying to access the hash member.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the uses of unsigned char * to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase --recurse-submodules" learns to rebase the
branch in the submodules to an updated base.
* sb/pull-rebase-submodule:
builtin/fetch cleanup: always set default value for submodule recursing
pull: optionally rebase submodules (remote submodule changes only)
builtin/fetch: parse recurse-submodules-default at default options parsing
builtin/fetch: factor submodule recurse parsing out to submodule config
Update the hashmap API so that data to customize the behaviour of
the comparison function can be specified at the time a hashmap is
initialized.
* sb/hashmap-customize-comparison:
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
Code cleanup.
* ab/grep-lose-opt-regflags:
grep: remove redundant REG_NEWLINE when compiling fixed regex
grep: remove regflags from the public grep_opt API
grep: remove redundant and verbose re-assignments to 0
grep: remove redundant "fixed" field re-assignment to 0
grep: adjust a redundant grep pattern type assignment
grep: remove redundant double assignment to 0
When color placeholders like %(color:red) are used in a
ref-filter format, we unconditionally output the colors,
even if the user has asked us for no colors. This usually
isn't a problem when the user is constructing a --format on
the command line, but it means we may do the wrong thing
when the format is fed from a script or alias. For example:
$ git config alias.b 'branch --format=%(color:green)%(refname)'
$ git b --no-color
should probably omit the green color. Likewise, running:
$ git b >branches
should probably also omit the color, just as we would for
all baked-in coloring (and as we recently started to do for
user-specified colors in --pretty formats).
This commit makes both of those cases work by teaching
the ref-filter code to consult want_color() before
outputting any color. The color flag in ref_format defaults
to "-1", which means we'll consult color.ui, which in turn
defaults to the usual isatty() check on stdout. However,
callers like git-branch which support their own color config
(and command-line options) can override that.
The new tests independently cover all three of the callers
of ref-filter (for-each-ref, tag, and branch). Even though
these seem redundant, it confirms that we've correctly
plumbed through all of the necessary config to make colors
work by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-list pretty-prints a commit, it creates a new
pretty_print_context and copies items from the rev_info
struct. We don't currently copy the "use_color" field,
though. Nobody seems to have noticed because the only part
of pretty.c that cares is the %C(auto,...) placeholder, and
presumably not many people use that with the rev-list
plumbing (as opposed to with git-log).
It will become more noticeable in a future patch, though,
when we start treating all user-format colors as auto-colors
(in which case it would become impossible to format colors
with rev-list, even with --color=always).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most commands we load config before parsing command line
options, since it lets the latter override the former with a
simple variable assignment. In the case of for-each-ref,
though, we do it in the reverse order. This is OK with
the current code, since there's no interaction between the
config and command-line options.
However, as the ref-filter code starts to care about config
during verify_ref_format(), we'll want to make sure the
config is loaded. Let's bump the config to the usual spot
near the top of the function.
We can drop the comment there; it's impossible to keep a
"why we load the config" comment like this up to date with
every config option we might be interested in. And indeed,
it's already stale; we'd care about core.abbrev, for
instance, when %(objectname:short) is used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in prehistoric times, our decision on whether or not to
show color by default relied on using a config callback that
either did or didn't load color config like color.diff.
When we introduced color.ui, we put it in the same boat:
commands had to manually respect it by using git_color_config()
or its git_color_default_config() convenience wrapper.
But in 4c7f1819b (make color.ui default to 'auto',
2013-06-10), that changed. Since then, we default color.ui
to auto in all programs, meaning that even plumbing commands
like "git diff-tree --pretty" might colorize the output.
Nobody seems to have complained in the intervening years,
presumably because the "is stdout a tty" check does a good
job of catching the right cases.
But that leaves an interesting curiosity: color.ui defaults
to auto even in plumbing, but you can't actually _disable_
the color via config. So if you really hate color and set
"color.ui" to false, diff-tree will still show color (but
porcelain like git-diff won't). Nobody noticed that either,
probably because very few people disable color.
One could argue that the plumbing should _always_ disable
color unless an explicit --color option is given on the
command line. But in practice, this creates a lot of
complications for scripts which do want plumbing to show
user-visible output. They can't just pass "--color" blindly;
they need to check the user's config and decide what to
send.
Given that nobody has complained about the current behavior,
let's assume it's a good path, and follow it to its
conclusion: supporting color.ui everywhere.
Note that you can create havoc by setting color.ui=always in
your config, but that's more or less already the case. We
could disallow it entirely, but it is handy for one-offs
like:
git -c color.ui=always foo >not-a-tty
when "foo" does not take a --color option itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-filter module currently provides a callback suitable
for parsing command-line --sort options. But since git-tag
also supports the tag.sort config option, it needs a
function whose implementation is quite similar, but with a
slightly different interface. The end result is that
builtin/tag.c has a copy-paste of parse_opt_ref_sorting().
Instead, let's provide a function to parse an arbitrary
sort string, which we can then trivially wrap to make the
parse_opt variant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-filter module provides routines for formatting a ref
for output. The fundamental interface for the format is a
"const char *" containing the format, and any additional
options need to be passed to each invocation of
show_ref_array_item.
Instead, let's make a ref_format struct that holds the
format, along with any associated format options. That will
make some enhancements easier in the future:
1. new formatting options can be added without disrupting
existing callers
2. some state can be carried in the struct rather than as
global variables
For now this just has the text format itself along with the
quote_style option, but we'll add more fields in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users of the ref-filter code must call verify_ref_format()
before formatting any refs, but most ignore its return
value. This means we may print an error on a syntactically
bogus pattern, but keep going anyway.
In most cases this results in a fatal error when we actually
try to format a ref. But if you have no refs to show at all,
then the behavior is confusing: git prints the error from
verify_ref_format(), then exits with code 0 without showing
any output. Let's instead abort immediately if we know we
have a bogus format.
We'll output the usage information if we have it handy (just
like the existing call in cmd_for_each_ref() does), and
otherwise just die().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of "git branch --list" using for-each-ref's internals
that happened in v2.13 regressed its handling of color.branch.local;
this has been fixed.
* kn/ref-filter-branch-list:
ref-filter.c: drop return from void function
branch: set remote color in ref-filter branch immediately
branch: use BRANCH_COLOR_LOCAL in ref-filter format
branch: only perform HEAD check for local branches
The rewrite of "git branch --list" using for-each-ref's internals
that happened in v2.13 regressed its handling of color.branch.local;
this has been fixed.
* kn/ref-filter-branch-list:
ref-filter.c: drop return from void function
branch: set remote color in ref-filter branch immediately
branch: use BRANCH_COLOR_LOCAL in ref-filter format
branch: only perform HEAD check for local branches
We normally try to avoid having two auto-gc operations run
at the same time, because it wastes resources. This was done
long ago in 64a99eb47 (gc: reject if another gc is running,
unless --force is given, 2013-08-08).
When we do a detached auto-gc, we run the ref-related
commands _before_ detaching, to avoid confusing lock
contention. This was done by 62aad1849 (gc --auto: do not
lock refs in the background, 2014-05-25).
These two features do not interact well. The pre-detach
operations are run before we check the gc.pid lock, meaning
that on a busy repository we may run many of them
concurrently. Ideally we'd take the lock before spawning any
operations, and hold it for the duration of the program.
This is tricky, though, with the way the pid-file interacts
with the daemonize() process. Other processes will check
that the pid recorded in the pid-file still exists. But
detaching causes us to fork and continue running under a
new pid. So if we take the lock before detaching, the
pid-file will have a bogus pid in it. We'd have to go back
and update it with the new pid after detaching. We'd also
have to play some tricks with the tempfile subsystem to
tweak the "owner" field, so that the parent process does not
clean it up on exit, but the child process does.
Instead, we can do something a bit simpler: take the lock
only for the duration of the pre-detach work, then detach,
then take it again for the post-detach work. Technically,
this means that the post-detach lock could lose to another
process doing pre-detach work. But in the long run this
works out.
That second process would then follow-up by doing
post-detach work. Unless it was in turn blocked by a third
process doing pre-detach work, and so on. This could in
theory go on indefinitely, as the pre-detach work does not
repack, and so need_to_gc() will continue to trigger. But
in each round we are racing between the pre- and post-detach
locks. Eventually, one of the post-detach locks will win the
race and complete the full gc. So in the worst case, we may
racily repeat the pre-detach work, but we would never do so
simultaneously (it would happen via a sequence of serialized
race-wins).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert code that divides and rounds up to use DIV_ROUND_UP to make the
intent clearer and reduce the number of magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An old message shown in the commit log template was removed, as it
has outlived its usefulness.
* ks/commit-assuming-only-warning-removal:
commit-template: distinguish status information unconditionally
commit-template: remove outdated notice about explicit paths
When git-rev-list sees no pending commits, it shows a usage
message. This works even when reflog-walking is requested,
because the reflog-walk code currently puts the reflog tips
into the pending queue.
In preparation for refactoring the reflog-walk code, let's
explicitly check whether we have any reflogs to walk. For
now this is a noop, but the existing reflog tests will make
sure that it kicks in after the refactoring. Likewise, we'll
add a test that "rev-list -g" without specifying any reflogs
continues to fail (so that we know our check does not kick
in too aggressively).
Note that the implementation needs to go into its own
sub-function, as the walk code does not expose its innards
outside of reflog-walk.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're doing a reflog walk (instead of walking the
actual parent pointers), we may see commits multiple times.
For this reason, we hold on to the commit buffer for each
commit rather than freeing it after we've showed the commit.
We should do the same for the parent list. Right now this is
just a minor optimization. But once we refactor how reflog
walks are performed, keeping the parents will avoid
confusing us the second time we see the commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're walking reflogs, we leave the commit buffer and
parents in place. A comment explains that this is due to
"cycles". But the interesting thing is the unsaid
implication: that the cycles (plus our clearing of the SEEN
flag) will cause us to show commits multiple times. Let's
spell it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set the current and local branch colors at the top of the
build_format() function. Let's do the same for the remote
color. This saves a little bit of repetition, but more
importantly it puts all of the color-setting in the same
place. That makes it easier to see that we are coloring all
possibilities.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 949af0684 (branch: use ref-filter printing APIs,
2017-01-10), git-branch's output is generated by passing a
custom format to the ref-filter code. This format forgot to
pass BRANCH_COLOR_LOCAL, meaning that local branches
(besides the current one) were never colored at all.
We can add it in the %(if) block where we decide whether the
branch is "current" or merely "local". Note that this means
the current/local coloring is either/or. You can't set:
[color "branch"]
local = blue
current = bold
and expect the current branch to be "bold blue". This
matches the pre-949af0684 behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When assembling the ref-filter format to show "git branch"
output, we put the "%(if)%(HEAD)" conditional at the start
of the overall format. But there's no point in checking
whether a remote branch matches HEAD, as it never will.
The check should go inside the local conditional; we
assemble that format inside the "local" strbuf.
By itself, this is just a minor optimization. But in a
future patch, we'll need this refactoring to fix
local-branch coloring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
Introduce a "repository" object to eventually make it easier to
work in multiple repositories (the primary focus is to work with
the superproject and its submodules) in a single process.
* bw/repo-object:
ls-files: use repository object
repository: enable initialization of submodules
submodule: convert is_submodule_initialized to work on a repository
submodule: add repo_read_gitmodules
submodule-config: store the_submodule_cache in the_repository
repository: add index_state to struct repo
config: read config from a repository object
path: add repo_worktree_path and strbuf_repo_worktree_path
path: add repo_git_path and strbuf_repo_git_path
path: worktree_git_path() should not use file relocation
path: convert do_git_path to take a 'struct repository'
path: convert strbuf_git_common_path to take a 'struct repository'
path: always pass in commondir to update_common_dir
path: create path.h
environment: store worktree in the_repository
environment: place key repository state in the_repository
repository: introduce the repository object
environment: remove namespace_len variable
setup: add comment indicating a hack
setup: don't perform lazy initialization of repository state
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor calls to the grep machinery to always pass opt.ignore_case &
opt.extended_regexp_option instead of setting the equivalent regflags
bits.
The bug fixed when making -i work with -P in commit 9e3cbc59d5 ("log:
make --regexp-ignore-case work with --perl-regexp", 2017-05-20) was
really just plastering over the code smell which this change fixes.
The reason for adding the extensive commentary here is that I
discovered some subtle complexity in implementing this that really
should be called out explicitly to future readers.
Before this change we'd rely on the difference between
`extended_regexp_option` and `regflags` to serve as a membrane between
our preliminary parsing of grep.extendedRegexp and grep.patternType,
and what we decided to do internally.
Now that those two are the same thing, it's necessary to unset
`extended_regexp_option` just before we commit in cases where both of
those config variables are set. See 84befcd0a4 ("grep: add a
grep.patternType configuration setting", 2012-08-03) for the code and
documentation related to that.
The explanation of why the if/else branches in
grep_commit_pattern_type() are ordered the way they are exists in that
commit message, but I think it's worth calling this subtlety out
explicitly with a comment for future readers.
Even though grep_commit_pattern_type() is the only caller of
grep_set_pattern_type_option() it's simpler to reset the
extended_regexp_option flag in the latter, since 2/3 branches in the
former would otherwise need to reset it, this way we can do it in one
place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit template adds the status information without
adding a new line to distinguish them in the absence
of optional parts. This results in difficulty in interpreting
it's content, specifically for inexperienced users.
Unconditionally, add new lines to separate the status message
from the other parts of the commit-template to make it more
readable.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notice that "git commit <paths>" default to "git commit
--only <paths>" was there since 756e3ee0 ("Merge branch
'jc/commit'", 2006-02-14). Back then, existing users of Git
expected the command doing "git commit --include <paths>", and
after the behaviour of the command was changed to align with
other people's "$scm commit <paths>", the text was added to help
them transition their expectations.
Remove the message that now has outlived its usefulness.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check for the default was introduced with 88a21979c5 (fetch/pull:
recurse into submodules when necessary, 2011-03-06), which replaced an
older construct (builtin/fetchs own implementation of the super-prefix)
introduced in be254a0ea9 (Add the 'fetch.recurseSubmodules' config setting,
2010-11-11) which made sense at the time as there was no default fetch
option for submodules at the time.
Set builtin/fetch.c#recurse_submodules_default to the same value as
submodule.c#config_fetch_recurse_submodules which is set via
set_config_fetch_recurse_submodules, such that the condition for checking
whether we have to set the default value becomes unnecessary.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learned to optionally give how many stash entries the
user has in its output.
* lb/status-stash-count:
glossary: define 'stash entry'
status: add optional stash count information
stash: update documentation to use 'stash entry'
has_sha1_file_with_flags() implements many mechanisms in common with
sha1_object_info_extended(). Make has_sha1_file_with_flags() a
convenience function for sha1_object_info_extended() instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
