Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects. Track down all uses of expr and mangle the arguments
so that this isn't a problem.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When cloning from a remote repository that has master, main, and
origin branches _and_ with the HEAD pointing at main branch, we
did quite confused things during clone. So this cleans things
up. The behaviour is a bit different between separate remotes/
layout and the mixed branches layout.
The newer layout with $GIT_DIR/refs/remotes/$origin/, things are
simpler and more transparent:
- remote branches are copied to refs/remotes/$origin/.
- HEAD points at the branch with the same name as the remote
HEAD points at, and starts at where the remote HEAD points at.
- $GIT_DIR/remotes/$origin file is set up to fetch all remote
branches, and merge the branch HEAD pointed at at the time of
the cloning.
Everything-in-refs/heads layout was the more confused one, but
cleaned up like this:
- remote branches are copied to refs/heads, but the branch
"$origin" is not copied, instead a copy of the branch the
remote HEAD points at is created there.
- HEAD points at the branch with the same name as the remote
HEAD points at, and starts at where the remote HEAD points at.
- $GIT_DIR/remotes/$origin file is set up to fetch all remote
branches except "$origin", and merge the branch HEAD pointed
at at the time of the cloning.
With this, the remote has master, main and origin, and its HEAD
points at main, you could:
git clone $URL --origin upstream
to use refs/heads/upstream as the tracking branch for remote
"main", and your primary working branch will also be "main".
"master" and "origin" are used to track the corresponding remote
branches and with this setup they do not have any special meaning.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone without a repo isn't useful at all. print message and get
out asap.
This patch also move the variable 'local' to where other variables are
initialized.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone currently take option '-o' to specify origin. this patch
makes git-clone to take double-dashed option '--origin' and other
abbreviations in addtion to the current single-dashed option.
[jc: with minor fixups]
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The traditional one created refs/origin by mistake, not
refs/heads/origin. Also it mistakenly failed to prevent
$origin from being listed twice in remotes/origin file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This matches c51d13692d commit to
record the primary branch of the remote with a symbolic ref
remotes/$origin/HEAD. The user can later change it to point at
different branch to change the meaning of "$origin" shorthand.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This builds on top of the previous one.
* --use-separate-remote uses .git/refs/remotes/$origin/
directory to keep track of the upstream branches.
* The $origin above defaults to "origin" as usual, but the
existing "-o $origin" option can be used to override it.
I am not yet convinced if we should make "$origin" the synonym to
"refs/remotes/$origin/$name" where $name is the primary branch
name of $origin upstream, nor if so how we should decide which
upstream branch is the primary one, but that is more or less
orthogonal to what the clone does here.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does two things.
* A new flag --reference can be used to name a local repository
that is to be used as an alternate. This is in response to
an inquiry by James Cloos in the message on the list
<m3r74ykue7.fsf@lugabout.cloos.reno.nv.us>.
* A new flag --use-separate-remote stops contaminating local
branch namespace by upstream branch names. The upstream
branch heads are copied in .git/refs/remotes/ instead of
.git/refs/heads/ and .git/remotes/origin file is set up to
reflect this as well. It requires to have fetch/pull update
to understand .git/refs/remotes by Eric Wong to further
update the repository cloned this way.
For the former change, git-fetch-pack is taught a new flag --all
to fetch from all the remote heads. Nobody uses the git-clone-pack
with this change, so we could deprecate the command, but removal
of the command will be left to a separate round.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In windows you cannot remove current or opened directory,
an opened file, a running program, a loaded library, etc...
[jc: signoffs? With a minor quoting fix.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements "eye candy" similar to the pack-object/unpack-object
to entertain users while a large tree is being checked out after
a clone or a pull.
Signed-off-by: Junio C Hamano <junkio@cox.net>
To some cpio's, -a and -m options are mutually exclusive. Use only -m.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If Git is compiled with NO_CURL=YesPlease and one tries to
clone a http repository, git-clone tries to call the curl
binary. This trivial patch prints an error instead in such
situation.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If repo has the form <host>:<path> and <path> doesn't contain a slash, the
cloned repository is named "<host>:<path>", instead of "<path>" only.
Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new option --naked is to help creating a naked repository
for public consumption.
$ git clone -l -s --naked \
/pub/scm/.../torvalds/linux-2.6.git subproj-2.6.git
is equivalent to this sequence:
$ git clone -l -s -n /pub/scm/.../torvalds/linux-2.6.git temp
$ mv temp/.git subproj-2.6.git
$ rmdir temp
Signed-off-by: Junio C Hamano <junkio@cox.net>
Underlying http-fetch is supposed to be capable of handling
packed repositories just fine, so no need to special case it in
the wrapper script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, git-clone stored upstream's master in the branch named 'origin',
possibly overwriting an existing such branch.
Now you can change it by calling git-clone with '-o <other_name>'.
[jc: added ref format check, subdirectory safety, documentation
and usage string.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When clone-pack has trouble with the remote, it dies unfriendly
"EOF" error message. We cannot tell the reason why it failed
from the local end; it could be that the repository did not
exist, or configured not to serve over git-daemon, or a network
failure. At least, saying clone-pack failed makes it a bit more
meaningful.
I am not convinced yet that removing the newly created directory
is the right thing to do, so this commit leaves the new
directory behind.
Reported by Sam Ravnborg.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "--shared" option to git-clone is silently ignored if "--local" is
not specified. The manual doesn't mention such dependency. Make
"--shared" imply "--local".
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a typo: We do not want to run the directory as command,
and want to terminate if the directory exists
Additionally, update the usage message
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds -p to mkdir and an explicit check to see if the target
directory exists (since mkdir -p doesn't throw an error if it does).
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch the following commands all clone into the local directory
"repo". If repo exists, it will still barf.
git-clone git://host.xz/repo.git
git-clone /path/to/repo/.git
git-clone host.xz:repo.git
I ended up doing the same source-to-target sed'ing for all our company
projects, so it was easier to add it directly to git-clone.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone doesn't quote the full path to the destination directory,
which causes it to fail if the path contains spaces or other characters
interpreted by the shell.
[jc: obviously I was not careful enough. Pavel, thanks for catching.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, git-clone silently failed to clone a remote
repository where redirections (ie. a response with a
"Location" header line) are used.
This includes the fixes from Nick Hengeveld.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the idea Daniel Barkalow came up with, to match
the remotes/origin created by clone by default to the workflow I
use myself in my guinea pig repository, to have me eat my own
dog food.
We probably would want to use either .git/refs/local/heads/*
(idea by Linus) or .git/refs/heads/origin/* instead to reduce
the local ref namespace pollution.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we let cpio to create the leading directories implicitly,
it ends up having funny perm bits (GNU cpio 2.5 and 2.6, at least).
This leaves .git/object/?? directories readable only by the owner.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The newly cloned repository by default had .git/remotes/origin
set up to track the remote master to origin, but forgot to
create the origin branch ourselves. Also it hardcoded the
assumption that the remote HEAD points at "master", which may
not always be true.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somehow I forgot to forward port these fixes. "git clone" from a
repository prepared with the latest update-server-info would fail
without this patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Taking the make command line Peter Eriksen uses, give defaults
to SHELL_PATH, TAR, CURLDIR, NO_STRCASESTR, and INSTALL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we check the optional objects/info/alternates file at the remote
repository, we forgot to really squelch error message from rsync.
Not having that file is not a crime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For local operations and downloading and uploading via git aware protocols,
use of $GIT_OBJECT_DIRECTORY/info/alternates is recommended on the server
side for big projects that are derived from another one (like Linux kernel).
However, dumb protocols and rsync transport needs to resolve this on the
client end, which we did not bother doing until this week.
I noticed we use "rsync -z" but most of our payload is already compressed,
which was not quite right. This commit also fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
CDPATH has two problems:
* It takes scripts to unexpected places (somebody had
CDPATH=..:../..:$HOME and the "cd" in git-clone.sh:get_repo_base
took him to $HOME/.git when he said "clone foo bar" to clone a
repository in "foo" which had "foo/.git"). CDPATH mechanism does
not implicitly give "." at the beginning of CDPATH, which is
the most irritating part.
* The extra echo when it does its thing confuses scripts further.
Most of our scripts that use "cd" includes git-sh-setup so the problem
is primarily fixed there. git-clone starts without a repository, and
it needs its own fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
