Rename detection logic used to match two empty files as renames during
merge-recursive, leading unnatural mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
An age-old corner case bug in combine diff (only triggered with -U0
and the hunk at the beginning of the file needs to be shown) has been
fixed.
By René Scharfe
* rs/combine-diff-zero-context-at-the-beginning:
combine-diff: fix loop index underflow
When "git commit --template F" errors out because the user did not
touch the message, it claimed that it aborts due to "empty message",
which was utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
"git add -p" is not designed to deal with unmerged paths but did
not exclude them and tried to apply funny patches only to fail.
By Jeff King
* jk/add-p-skip-conflicts:
add--interactive: ignore unmerged entries in patch mode
"git commit --author=$name" did not tell the name that was being
recorded in the resulting commit to hooks, even though it does do so
when the end user overrode the authorship via the "GIT_AUTHOR_NAME"
environment variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
The regexp configured with diff.wordregex was incorrectly reused
across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
After running rev-list --boundary to retrieve the list of boundary
commits, "git bundle create" runs its own revision walk. If in this
stage git encounters an unfamiliar option, it writes a message with an
unbalanced quotation mark:
error: unrecognized argument: --foo'
Drop the stray quote to match the "unrecognized argument: %s" message
used elsewhere and save translators some work.
This is mostly a futureproofing measure: for now, the "rev-list
--boundary" command catches most strange arguments on its own and the
above message is not seen unless you try something esoteric like "git
bundle create test.bundle --header HEAD".
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if we even have a parameter before checking its value. Running
this command without any arguments may not make a lot of sense, but
reacting with a segmentation fault is unduly harsh.
While we're at it, avoid casting argv by declaring it const right away.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add void to make it match its definition in submodule.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
remote-curl: Fix push status report when all branches fail
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
Otherwise:
/usr/bin/perl Makefile.PL PREFIX='/opt/git' INSTALL_BASE=''
Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: ...) at Makefile.PL line 1.
BEGIN failed--compilation aborted at Makefile.PL line 1.
make[1]: *** [perl.mak] Error 2
make: *** [perl/perl.mak] Error 2
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add -p" sees an unmerged entry, it shows the combined
diff and then immediately skips the hunk. This can be
confusing in a variety of ways, depending on whether there
are other changes to stage (in which case you get the
superfluous combined diff output in between other hunks) or
not (in which case you get the combined diff and the program
exits immediately, rather than seeing "No changes").
The current behavior was not planned, and is just what the
implementation happens to do. Instead, let's explicitly
remove unmerged entries from our list of modified files, and
print a warning that we are ignoring them.
We can cheaply find which entries are unmerged by adding
"--raw" output to the "diff-files --numstat" we already run.
There is one non-obvious thing we must change when parsing
this combined output. Before this patch, when we saw a
numstat line for a file that did not have index changes, we
would create a new record with 'unchanged' in the 'INDEX'
field. Because "--raw" comes before "--numstat", we must
move this special-case down to the raw-line case (and it is
sufficient to move it rather than handle it in both places,
since any file which has a --numstat will also have a --raw
entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "commit -t <file>" said the file is used "as the
initial version" of the commit message, but in the context of an SCM,
"version" is a loaded word that can needlesslyl confuse readers.
Explain the purpose of the mechanism without using "version".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes to the dialog window tree broke the preview of the selected
font on the button. This corrects that issue.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8.5 the incr command creates the target variable if it does not exist
but in 8.4 using incr on a non-existing variable raises an error. Ensure
we have created our counter variable when creating the tabbed dialog for
non-themed preferences.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portuguese Portuguese translations from Marco Sousa via Jiang Xin
* 'master' of git://github.com/git-l10n/git-po:
l10n: Add the Dutch translation team and initialize nl.po
l10n: Inital Portuguese Portugal language (pt_PT)
l10n: Improve zh_CN translation for Git 1.7.10-rc3
Make it clear that, when using commit --template, the message *must* be
changed or the commit will be aborted.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ivan Heffner <iheffner@gmail.com>
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user exited editor without editing the commit log template given
by "git commit -t <template>", the commit was aborted (correct) with an
error message that said "due to empty commit message" (incorrect).
This was because the original template support was done by piggybacking on
the check to detect an empty log message. Split the codepaths into two
independent checks to clarify the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-t template" and "-F msg" options are both given (or worse yet,
there is "commit.template" configuration but a message is given in some
other way), the documentation says that template is ignored. However,
the "has the user edited the message?" check still used the contents of
the template file as the basis of the emptyness check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests try to run "git commit" with various "forbidden" combinations
of options and expect the command to fail, but they do so without having
any change added to the index. We wouldn't be able to catch breakages
that would allow these combinations by mistake with them because the
command will fail with "nothing to commit" anyway.
Make sure we have something added to the index before running the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improvements of zh_CN translations:
- Update translation for msg "Changes not staged for commit:".
- Remove unnecessary leading spaces for some messages.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
v1.7.9-8-g270a344 (config: stop using config_exclusive_filename) replaced
config_exclusive_filename with given_config_file. In one case this
resulted in a self-assignment, which is reported by clang as a warning.
Remove the useless code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by running this command:
$ git ls-files -z|xargs -0 perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e ' {' \
-e ' $n = ($` =~ tr/\n/\n/ + 1);' \
-e ' ($v = $&) =~ s/\n/\\n/g;' \
-e ' print "$ARGV:$n:$v\n";' \
-e ' }'
Why not just git grep -E ...?
That wouldn't work then the doubled words are separated by a newline.
This is derived from a Makefile syntax-check rule in gnulib's maint.mk:
http://git.sv.gnu.org/cgit/gnulib.git/tree/top/maint.mk
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
