Because large merges on slow systems can take up to a minute to
execute we should try to keep the user entertained with a progress
meter to let them know how far we have progressed through the
current merge.
The progress meter considers each entry in the in-memory index to
be a unit, which means a single recursive merge will double the
number of units in the progress meter. Files which are unmerged
after the 3-way tree merge are also considered a unit within the
progress meter.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Buffering all message output until a merge invocation is complete is
necessary to prevent intereferring with a progress meter that would
indicate the number of files completely merged, and how many remain.
This change does not introduce a progress meter, but merely lays
the groundwork to buffer the output.
To aid debugging output buffering is only enabled if verbosity
is lower than 5. When using verbosity levels above 5 the user is
probably debugging the merge program itself and does not want to
see the output delayed, especially if they are stepping through
portions of the code in a debugger.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano <junkio@cox.net> writes:
>
> I think the output from merge-recursive can be categorized into 5
> verbosity levels:
>
> 1. "CONFLICT", "Rename", "Adding here instead due to D/F conflict"
> (outermost)
>
> 2. "Auto-merged successfully" (outermost)
>
> 3. The first "Merging X with Y".
>
> 4. outermost "Merging:\ntitle1\ntitle2".
>
> 5. outermost "found N common ancestors\nancestor1\nancestor2\n..."
> and anything from inner merge.
>
> I would prefer the default verbosity level to be 2 (that is, show
> both 1 and 2).
and this change makes it so. I think level 3 is probably pointless
as its only one line of output above level 2, but I can see how some
users may want to view it but not view the slightly more verbose
output of level 4.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because the output_indent always matches the call_depth value
there is no reason to pass around the call_depth to the merge
function during each recursive invocation.
This is a simple refactoring that will make the code easier to
follow later on as I start to add output verbosity controls.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/int:
More tests in t3901.
Consistent message encoding while reusing log from an existing commit.
t3901: test "format-patch | am" pipe with i18n
Use log output encoding in --pretty=email headers.
* jc/subdir:
Allow whole-tree operations to be started from a subdirectory
Use cd_to_toplevel in scripts that implement it by hand.
Define cd_to_toplevel shell function in git-sh-setup
Originally I introduced read_or_die for the purpose of reading
the pack header and trailer, and I was too lazy to print proper
error messages.
Linus Torvalds <torvalds@osdl.org>:
> For a read error, at the very least you have to say WHICH FILE
> couldn't be read, because it's usually a matter of some file just
> being too short, not some system-wide problem.
and of course Linus is right. Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user doesn't have SVN::Core installed or working then the
SVN tests properly turn themselves off. But the user doesn't need
to know that SVN::Core isn't loadable as a Perl module. Unless of
course they are trying to debug the test, so lets relegate the Perl
failures to --verbose only.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Suggesting the use of [-a|-i|-o] with git-commit is unnecessarily
complex and confusing. In this context -o is totally useless and -i
requires extra arguments which are not mentioned. The only sensible
hint (besides reading the man page but let's not go there) is
"commit -a".
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds tests for "cherry-pick" and "rebase --merge" (and
indirectly "commit -C" since it is used in the latter) to make
sure they create a new commit with correct encoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The following commands can reuse log message from an existing
commit while creating a new commit:
git-cherry-pick
git-rebase (both with and without --merge)
git-commit (-c and -C)
When the original commit was made in a different encoding from
the current i18n.commitencoding, "cat-file commit" would give a
string that is inconsistent with what the resulting commit will
claim to be in. Replace them with "git show -s --encoding".
"git-rebase" without --merge is "git format-patch" piped to "git
am" in essence, and has been taken care of before this commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This checks combinations of i18n.commitencoding (declares what
encoding you are feeding commit-tree to make commits) and
i18n.logoutputencoding (instructs what encoding to emit the
commit message out to log output, including e-mail format) to
make sure the "format-patch | am" pipe used in git-rebase works
correctly.
I suspect "git cherry-pick" and "git rebase --merge" may fail
similar tests. We'll see.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the recent changes and shortcuts to the tests broke
things for people using older versions of svn:
t9104-git-svn-follow-parent.sh:
v1.2.3 (from SuSE 10.0 as reported by riddochc on #git
(thanks!)) required an extra 'svn up'. I was also able to
reproduce this with v1.1.4 (Debian Sarge).
lib-git-svn.sh:
SVN::Repos bindings in versions up to and including 1.1.4
(Sarge again) do not pass fs-config options to the underlying
library. BerkeleyDB repositories also seem completely broken
on all my Sarge machines; so not using FSFS does not seem to
be an option for most people.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates five commands (merge, pull, rebase, revert and cherry-pick)
so that they can be started from a subdirectory.
This may not actually be what we want to do. These commands are
inherently whole-tree operations, and an inexperienced user may
mistakenly expect a "git pull" from a subdirectory would merge
only the subdirectory the command started from.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This converts scripts that do "cd $(rev-parse --show-cdup)" by
hand to use cd_to_toplevel.
I think git-fetch does not have to go to the toplevel, but that
should be dealt with in a separate patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Steven Grimm noticed that git-repack's verbosity is inconsistent
because pack-objects is chatty and prune-packed is not. This
makes the latter a bit more chatty and gives -q option to
squelch it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins noticed that the error message some "whole tree"
oriented commands emit is stated misleadingly when they refused
to run from a subdirectory.
We could probably allow some of them to work from a subdirectory
but that is a semantic change that could have unintended side
effects, so let's start at first by rewording the error message
to be easier to read without doing anything else to be safe.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is not available in the outermost merge, and it is only
useful for debugging merge-recursive in the inner merges.
Sergey Vlasov noticed that the old code accesses an
uninitialized location.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code previously checked it's own name and called 'die' upon
an error. However 'die' was not yet defined because git-sh-setup
had not been sourced yet. Instead simply write the error message
to stderr and exit with an error as was originally desired.
Signed-off-by: Bob Proulx <bob@proulx.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Despite what the documentation claims, git-commit does not check commit
for suspicious lines: all hooks are disabled by default,
and the pre-comit hook could be changed to do something else.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "read_or_die()" function would silently NOT die for a partial read,
and since it was of type "void" it obviously couldn't even return the
partial number of bytes read.
IOW, it was totally broken. This hopefully fixes it up.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new-and-improved write_in_full() semantics, where a partial write
simply always returns a real error (and always sets 'errno' when that
happens, including for the disk full case), a lot of the callers of
write_in_full() were just unnecessarily complex.
In particular, there's no reason to ever check for a zero length or
return: if the length was zero, we'll return zero, otherwise, if a disk
full resulted in the actual write() system call returning zero the
write_in_full() logic would have correctly turned that into a negative
return value, with 'errno' set to ENOSPC.
I really wish every "write_in_full()" user would just check against "<0"
now, but this fixes the nasty and stupid ones.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recently git.git itself encountered a situation on its master and
next branches where git-describe stopped reporting 'v1.5.0-rc0-gN'
and instead started reporting 'v1.4.4.4-gN'. This appeared to be
a backward jump in version numbering.
maint o-------------------4
\ \
master o-o-o-o-o-o-o-5-o-C-o-W
The issue is that commit C in the diagram claims it is version
1.5.0, as the tag v1.5.0 is placed on commit 5. Yet commit W
claims it is version 1.4.4.4 as the tag v1.5.0 has an older tag
date than the v1.4.4.4 tag.
As it turns out this situation is very common. A bug fix applied
to maint and later merged into master occurs frequently enough that
it should Just Work Right(tm).
Rather than taking the first tag that gets found git-describe will
now generate a list of all possible tags and select the one which
has the most number of commits in common with HEAD (or whatever
revision the user requested the description of).
This rule is based on the principle shown in the diagram above.
There are a large number of commits on the primary development branch
'master' which do not appear in the 'maint' branch, and many of
these are already tagged as part of v1.5.0-rc0. Additionally these
commits are not in v1.4.4.4, as they are part of the v1.5.0 release
still being developed. The v1.5.0-rc0 tag is more descriptive of
W than v1.4.4.4 is, and therefore should be used.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
* jc/detached-head:
git-checkout: handle local changes sanely when detaching HEAD
git-checkout: safety check for detached HEAD checks existing refs
git-checkout: fix branch name output from the command
git-checkout: safety when coming back from the detached HEAD state.
git-checkout: rewording comments regarding detached HEAD.
git-checkout: do not warn detaching HEAD when it is already detached.
Detached HEAD (experimental)
git-branch: show detached HEAD
git-status: show detached HEAD
If you do:
$ /bin/rm foo
$ git status
we used to say "git add ... to add content to commit". But
suggsting "git add" to record the deletion of a file is simply
insane.
So this rewords various things:
- The section header is the old "Changed but not updated",
instead of "Changed but not added";
- Suggestion is "git add ... to update what will be committed",
instead of "... to add content to commit";
- If there are removed paths, the above suggestion becomes "git
add/rm ... to update what will be committed";
- For untracked files, the suggestion is "git add ... to
include in what will be committed".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Often the user would do "/bin/rm foo" before telling git, but
then want to tell git about it. "git rm foo" however would fail
because it cannot unlink(2) foo.
Treat ENOENT error return from unlink(2) as if a successful
removal happened.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unfortunately, while {read,write}_in_full do take into account
zero-sized reads/writes; their die and whine variants do not.
I have a repository where there are zero-sized files in
the history that was triggering these things.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes another problem that Andy's case showed: git-fsck-objects
reports nonsensical results for corrupt objects.
There were actually two independent and confusing problems:
- when we had a zero-sized file and used map_sha1_file, mmap() would
return EINVAL, and git-fsck-objects would report that as an insane and
confusing error. I don't know when this was introduced, it might have
been there forever.
- when "parse_object()" returned NULL, fsck would say "object not found",
which can be very confusing, since obviously the object might "exist",
it's just unparseable because it's totally corrupt.
So this just makes "xmmap()" return NULL for a zero-sized object (which is
a valid thing pointer, exactly the same way "malloc()" can return NULL for
a zero-sized allocation). That fixes the first problem (but we could have
fixed it in the caller too - I don't personally much care whichever way it
goes, but maybe somebody should check that the NO_MMAP case does
something sane in this case too?).
And the second problem is solved by just making the error message slightly
clearer - the failure to parse an object may be because it's missing or
corrupt, not necessarily because it's not "found".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These days, the command does a lot more than just initialise the
object database (such as setting default config-variables,
installing template hooks...), and "git init" is actually a more
sensible name nowadays.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the early days of Git we performed a 3-way read-tree based merge
before attempting any specific merge strategy, as our core merge
strategies of merge-one-file and merge-recursive were slower script
based programs which took far longer to execute. This was a good
performance optimization in the past, as most merges were able to
be handled strictly by `read-tree -m -u`.
However now that merge-recursive is a C based program which performs
a full 3-way read-tree before it starts running we need to pay the
cost of the 3-way read-tree twice if we have to do any sort of file
level merging. This slows down some classes of simple merges which
`read-tree -m -u` could not handle but which merge-recursive does
automatically.
For a really trivial merge which can be handled entirely by
`read-tree -m -u`, skipping the read-tree and just going directly
into merge-recursive saves on average 50 ms on my PowerPC G4 system.
May sound odd, but it does appear to be true.
In a really simple merge which needs to use merge-recursive to handle
a file that was modified on both branches, skipping the read-tree
in git-merge saves on average almost 100 ms (on the same PowerPC G4)
as we avoid doing some work twice.
We only avoid `read-tree -m -u` if the only strategy to use is
merge-recursive, as not all merge strategies perform as well as
merge-recursive does.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revamps the merge-recursive implementation following the
outline in:
Message-ID: <7v8xgileza.fsf@assigned-by-dhcp.cox.net>
There is no need to write out the index until the very end just
once from merge-recursive. Also there is no need to write out
the resulting tree object for the simple case of merging with a
single merge base.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge-recursive implementation in C inherited the invariant
that the on-file index file is written out and later read back
after any index operations and writing trees from the original
Python implementation. But it was only because the original
implementation worked at the scripting level.
There is no need to write out the index file after handling
every path.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since 98bf8a47c2 status would claim that
git-commit could be useful even if there are no changes except untracked files.
Since wt-status is already computing all the information needed go the whole
way and actually track the (non-)emptiness of all three sections separately,
unify the code, and provide useful messages for each individual case.
Thanks to Junio and Michael Loeffler for suggestions.
Signed-off-by: Jürgen Rühle <j-r@online.de>
