The value of this new command line option will be used as a key to
check the configuration for an help browser.
This should remove the last bit in 'git-help--browse' that was
specific to 'git-help', so that other git command can use
'git-help--browse'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-help--browse" helper is to launch a browser of the user's choice
to view the HTML version of git documentation for a given command. It
used to take the name of a command, convert it to the path of the
documentation by prefixing the directory name and appending the
".html" suffix, and start the browser on the path.
This updates the division of labor between the caller in help.c and
git-help--browser helper. The helper is now responsible for launching
a browser of the user's choice on given URLs, and it is the caller's
responsibility to tell it the paths to documentation files.
This is in preparation to reuse the logic to choose user's preferred
browser in instaweb.
The helper had a provision for running it without any command name, in
which case it showed the toplevel "git(7)" documentation, but the
caller in help.c never makes such a call. The helper now exits with a
usage message when no path is given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we process "foo/" entries in gitignore files on a system
that does not have d_type member in "struct dirent", the earlier
implementation ran lstat(2) separately when matching with
entries that came from the command line, in-tree .gitignore
files, and $GIT_DIR/info/excludes file.
This optimizes it by delaying the lstat(2) call until it becomes
absolutely necessary.
The initial idea for this change was by Jeff King, but I
optimized it further to pass pointers to around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did. This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo". In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.
A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it. This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An incorrect command "git mv subdir /outer/space" threw the
subdirectory to outside of the repository and then noticed that
/outer/space/subdir/ would be outside of the repository. The
error checking is backwards.
This fixes the issue by being careful about use of the return
value of get_pathspec(). Since the implementation already has
handcrafted loop to munge each path on the command line, we use
prefix_path() instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would need to notice and fail if command line had a nonsense pathspec.
Earlier get_pathspec() returned all the inputs including bad ones, but
the new one issues warnings and removes offending ones from its return
value, so the callers need to be adjusted to notice it.
Additional test scripts were initially from Robin Rosenberg, further fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_path() function called from get_pathspec() is
responsible for translating list of user-supplied pathspecs to
list of pathspecs that is relative to the root of the work
tree. When working inside a subdirectory, the user-supplied
pathspecs are taken to be relative to the current subdirectory.
Among special path components in pathspecs, we used to accept
and interpret only "." ("the directory", meaning a no-op) and
".." ("up one level") at the beginning. Everything else was
passed through as-is.
For example, if you are in Documentation/ directory of the
project, you can name Documentation/howto/maintain-git.txt as:
howto/maintain-git.txt
../Documentation/howto/maitain-git.txt
../././Documentation/howto/maitain-git.txt
but not as:
howto/./maintain-git.txt
$(pwd)/howto/maintain-git.txt
This patch updates prefix_path() in several ways:
- If the pathspec is not absolute, prefix (i.e. the current
subdirectory relative to the root of the work tree, with
terminating slash, if not empty) and the pathspec is
concatenated first and used in the next step. Otherwise,
that absolute pathspec is used in the next step.
- Then special path components "." (no-op) and ".." (up one
level) are interpreted to simplify the path. It is an error
to have too many ".." to cause the intermediate result to
step outside of the input to this step.
- If the original pathspec was not absolute, the result from
the previous step is the resulting "sanitized" pathspec.
Otherwise, the result from the previous step is still
absolute, and it is an error if it does not begin with the
directory that corresponds to the root of the work tree. The
directory is stripped away from the result and is returned.
- In any case, the resulting pathspec in the array
get_pathspec() returns omit the ones that caused errors.
With this patch, the last two examples also behave as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shares the connection between getting the remote ref list and
getting objects in the first batch. (A second connection is still used
to follow tags).
When we do not fetch objects (i.e. either ls-remote disconnects after
getting list of refs, or we decide we are already up-to-date), we
clean up the connection properly; otherwise the connection is left
open in need of cleaning up to avoid getting an error message from
the remote end when ssh is used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original "rewrite in C" did somewhat a sloppy job while
stealing code from git-write-tree.
The caller pretends as if the write_tree() function would return
an error code and being able to issue a sensible error message
itself, but write_tree() function just calls die() and never
returns an error. Worse yet, the function claims that it was
running git-write-tree (which is no longer true after
cherry-pick stole it).
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to talk about "internal company procedures", but this
document is about submitting patches to the git mailing list.
More useful information is when to say Acked-by: and Tested-by:.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is something I've had in mind for some time. I get enough
e-mails as-is, and I suspect the workflow to get list members
involved would work better if we get the discussion concluded on
the list first before patches hit my tree (even 'next').
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new error mode allows a line to have a carriage return at the
end of the line when checking and fixing trailing whitespace errors.
Some people like to keep CRLF line ending recorded in the repository,
and still want to take advantage of the automated trailing whitespace
stripping. We still show ^M in the diff output piped to "less" to
remind them that they do have the CR at the end, but these carriage
return characters at the end are no longer flagged as errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have more than one patch series, an earlier one of which
tries to introduce whitespace breakages and a later one of which
has such a new line in its context, "git-apply --whitespace=fix"
will apply and fix the whitespace breakages in the earlier one,
making the resulting file not to match the context of the later
patch.
A short demonstration is in the new test, t4125.
For example, suppose the first patch is:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -20,3 +20,3 @@
Hello world.$
-How Are you$
-Today?$
+How are you $
+today? $
to fix broken case in the string, but it introduces unwanted
trailing whitespaces to the result (pretend you are looking at
"cat -e" output of the patch --- '$' signs are not in the patch
but are shown to make the EOL stand out). And the second patch
is to change the wording of the greeting further:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -18,5 +18,5 @@
Greetings $
-Hello world.$
+Hello, everybody. $
How are you $
-today? $
+these days? $
If you apply the first one with --whitespace=fix, you will get
this as the result:
Hello world.$
How are you$
today?$
and this does not match the preimage of the second patch, which
demands extra whitespace after "How are you" and "today?".
This series is about teaching "git apply --whitespace=fix" to
cope with this situation better. If the patch does not apply,
it rewrites the second patch like this and retries:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -18,5 +18,5 @@
Greetings$
-Hello world.$
+Hello, everybody.$
How are you$
-today?$
+these days?$
This is done by rewriting the preimage lines in the hunk
(i.e. the lines that begin with ' ' or '-'), using the same
whitespace fixing rules as it is using to apply the patches, so
that it can notice what it did to the previous ones in the
series.
A careful reader may notice that the first patch in the example
did not touch the "Greetings" line, so the trailing whitespace
that is in the original preimage of the second patch is not from
the series. Is rewriting this context line a problem?
If you think about it, you will realize that the reason for the
difference is because the submitter's tree was based on an
earlier version of the file that had whitespaces wrong on that
"Greetings" line, and the change that introduced the "Greetings"
line was added independently of this two-patch series to our
tree already with an earlier "git apply --whitespace=fix".
So it may appear this logic is rewriting too much, it is not
so. It is just rewriting what we would have rewritten in the
past.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary to allow match_fragment() to attempt a match
with a preimage that is based on a version before whitespace
errors were fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "patch" parameter used to include leading '+' of an added
line in the patch, and the array was treated as 1-based. Make
it accept the contents of the line alone and simplify the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function apply_line() changed its behaviour depending on the
ws_error_action, whitespace_error and if the input was a context.
Make its caller responsible for such checking so that we can convert
the function to copy the contents of line while fixing whitespace
breakage more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had two pointer variables pointing to the same buffer and an
integer variable used to index into its tail part that was
active (old, oldlines and oldsize for the preimage, and their
'new' counterparts for the postimage).
To help readability, use 'oldlines' as the allocated pointer,
and use 'old' as the pointer to the tail that advances while the
code builds up the contents in the buffer. The size 'oldsize'
can be computed as (old-oldines).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates the way preimage and postimage in a patch hunk is
parsed and prepared for applying. By looking at image->line[n].flag,
the code can tell if it is a common context line that is the
same between the preimage and the postimage.
This matters when we actually start applying a patch with
contexts that have whitespace breakages that have already been
fixed in the target file.
Wnen the caller knows the hunk needs to match at the beginning
or at the end, there is no point starting from the line number
that is found in the patch and trying match with increasing
offset. The logic to find matching lines was made more line
oriented with the previous patch and this optimization is now
trivial.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the way git-apply internally works to be more line
oriented. The logic to find where the patch applies with offset
used to count line numbers by always counting LF from the
beginning of the buffer, but it is simplified because we count
the line length of the target file and the preimage snippet
upfront now.
The ultimate motivation is to allow applying patches
whose preimage context has whitespace corruption that has
already been corrected in the local copy. For that purpose, we
introduce a table of line-hash that allows us to match lines
that differ only in whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the logic to force match at the beginning and/or at
the end of the buffer to the actual function that finds the
match from its caller. This is a necessary preparation for the
next step to allow matching disregarding certain differences,
such as whitespace changes.
We probably could optimize this even more by taking advantage of
the fact that match_beginning and match_end forces the match to
be at an exact location (anchored at the beginning and/or the
end), but that's for another commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This restructures code to find matching location with offset
in find_offset() function, so that there is need for only one
call site of match_fragment() function. There still isn't a
change in the logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves three "if" conditions out of line from find_offset()
function, which is responsible for finding the matching place in
the preimage to apply the patch. There is no change in the
logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when the user sent the EOF control character, the
prompts would be repeated on the same line as the previous
prompt.
Now, repeat prompts display on separate lines.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single signal handler is used for both SIGTERM and
SIGINT in order to clean up after an uncouth termination
of git-send-email.
In particular, the handler resets the text color (this cleanup
was already present), turns on tty echoing (in case termination
occurrs during a masked Password prompt), and informs the user
of of any temporary files created by --compose.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path.
A convenience function prefix_filename() can concatenate two paths
to form a path that points at somewhere outside the work tree.
Use it in these codepaths instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of an malformed object, the object specific parsing functions
would return an error, which is currently ignored. The object can be partial
initialized in this case.
This patch make parse_object_buffer propagate such errors.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A zero commit date could be caused by:
* a missing author line
* a missing commiter line
* a malformed email address in the commiter line
* a malformed commit date
Simply reporting it as zero commit date is missleading.
Additionally, it upgrades the message to an error (instead of an printf).
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the text, the argument of -m is <master> which should be used in the
command synopsis, too.
Signed-off-by: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The regexp "$," can't match anything. Clearly not intended.
This was introduced in ce6f33c8 which is quite a while ago.
Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let "git svn" run "git gc --auto" every 1000 imported commits to
reduce the number of loose objects.
To handle the common use case of frequent imports, where each
invocation typically fetches much less than 1000 commits, also run gc
unconditionally at the end of the import.
"1000" is the same number that was used by default when we called
git-repack. It isn't necessarily still the best choice.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a moment, we'll start calling git-gc --auto instead, since it is a
better fit to what we're trying to accomplish.
The command line options are still accepted, but don't have any
effect, and we warn the user about that.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the '$Keyword: ...$' '...' data, so that files
don't have spurious megre conflicts between branches.
Handles both +ko and +k styles, and leaves the '$Foo$' in
the original file.
Signed-off-by: Simon Hausmann <simon@lst.de>
