In dcb500dc16 (cherry-pick/revert: advise using --skip, 2019-07-02),
`git commit` learned to suggest to run `git cherry-pick --skip` when
trying to cherry-pick an empty patch.
However, it was overlooked that there are more conditions than just a
`git cherry-pick` when this advice is printed (which originally
suggested the neutral `git reset`): the same can happen during a rebase.
Let's suggest the correct command, even during a rebase.
While at it, we adjust more places in `builtin/commit.c` that
incorrectly assumed that the presence of a `CHERRY_PICK_HEAD` meant that
surely this must be a `cherry-pick` in progress.
Note: we take pains to handle the situation when a user runs a `git
cherry-pick` _during_ a rebase. This is quite valid (e.g. in an `exec`
line in an interactive rebase). On the other hand, it is not possible to
run a rebase during a cherry-pick, meaning: if both `rebase-merge/` and
`sequencer/` exist or CHERRY_PICK_HEAD and REBASE_HEAD point to the same
commit , we still want to advise to use `git cherry-pick --skip`.
Original-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Working out which command wants to create a commit requires detailed
knowledge of the sequencer internals and that knowledge is going to
increase in subsequent commits. With that in mind lets encapsulate that
knowledge in sequencer.c rather than spreading it into builtin/commit.c.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add FROM_CHERRY_PICK_MULTI for a sequence of cherry-picks rather than
using a separate variable.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git commit` relies on the presence of CHERRY_PICK_HEAD to show the
correct error message in the case of an empty pick. This fixes a
regression introduced by the conversion from shell to C. In the shell
version everything was a cherry-pick as far as the sequencer code was
concerned so it always wrote CHERRY_PICK_HEAD. The conversion to C
forgot to update the code that creates CHERRY_PICK_HEAD. We do not want
to create CHERRY_PICK_HEAD for fixup and squash commands as that would
prevent `git commit --amend` from running.
Note that the error message shown by `git commit` for an empty pick
during a rebase is currently wrong as it talks about running `git
cherry-pick --skip` rather than `git rebase --skip`. This will be fixed
in a future commit which is why the tests are in t3403-rebase-skip.sh.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We disallow partial commits and amending when CHERRY_PICK_HEAD
exists. Add a couple of tests to check the error message printed in each
case before we refactor the code responsible for this.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dcb500dc16 (cherry-pick/revert: advise using --skip, 2019-07-02),
`git commit` learned to suggest to run `git cherry-pick --skip` when
trying to cherry-pick an empty patch, but that was never tested for.
Here is a test that verifies that a message is given to the user that
contains the correct invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of places where we compare two revisions with
test $(git rev-parse rev1) = $(git rev-parse rev2)
when these fail there's no indication what has gone wrong and you need
to be running with `-x` to see where the test has failed. Lets use
test_cmp_rev instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users of oneway_merge() (like "reset --hard") learned to take
advantage of fsmonitor to avoid unnecessary lstat(2) calls.
* us/unpack-trees-fsmonitor:
unpack-trees: skip stat on fsmonitor-valid files
Recently we have declared that GIT_TEST_* variables take the
usual boolean values (it used to be that some used "non-empty
means true" and taking GIT_TEST_VAR=YesPlease as true); make
sure we notice and fail when non-bool strings are given to
these variables.
* sg/test-bool-env:
t5608-clone-2gb.sh: turn GIT_TEST_CLONE_2GB into a bool
tests: add 'test_bool_env' to catch non-bool GIT_TEST_* values
The revision walking machinery uses resources like per-object flag
bits that need to be reset before a new iteration of walking
begins, but the resources related to topological walk were not
cleared correctly, which has been corrected.
* mh/clear-topo-walk-upon-reset:
revision: free topo_walk_info before creating a new one in init_topo_walk
revision: clear the topo-walk flags in reset_revision_walk
We have had compatibility fallback macro definitions for "PRIuMAX",
"PRIu32", etc. but did not for "PRIdMAX", while the code used the
last one apparently without any hiccup reported recently. The
fallback macro definitions for these <inttypes.h> macros that must
appear in C99 systems have been removed.
* hv/assume-priumax-is-available-anywhere:
git-compat-util.h: drop the `PRIuMAX` and other fallback definitions
"git submodule status" that is run from a subdirectory of the
superproject did not work well, which has been corrected.
* mg/submodule-status-from-a-subdirectory:
submodule: fix 'submodule status' when called from a subdirectory
Test cleanup.
* dl/t5520-cleanup:
t5520: replace `! git` with `test_must_fail git`
t5520: remove redundant lines in test cases
t5520: replace $(cat ...) comparison with test_cmp
t5520: don't put git in upstream of pipe
t5520: test single-line files by git with test_cmp
t5520: use test_cmp_rev where possible
t5520: replace test -{n,z} with test-lib functions
t5520: use test_line_count where possible
t5520: remove spaces after redirect operator
t5520: replace test -f with test-lib functions
t5520: let sed open its own input
t5520: use sq for test case names
t5520: improve test style
t: teach test_cmp_rev to accept ! for not-equals
t0000: test multiple local assignment
"git reset --patch $object" without any pathspec should allow a
tree object to be given, but incorrectly required a committish,
which has been corrected.
* nl/reset-patch-takes-a-tree:
reset: parse rev as tree-ish in patch mode
"git submodule status" and "git submodule status --cached" show
different things, but the documentation did not cover them
correctly, which has been corrected.
* mg/doc-submodule-status-cached:
doc: document 'git submodule status --cached'
The code to parse GPG output used to assume incorrectly that the
finterprint for the primary key would always be present for a valid
signature, which has been corrected.
* hi/gpg-optional-pkfp-fix:
gpg-interface: limit search for primary key fingerprint
gpg-interface: refactor the free-and-xmemdupz pattern
The sequencer machinery compared the HEAD and the state it is
attempting to commit to decide if the result would be a no-op
commit, even when amending a commit, which was incorrect, and
has been corrected.
* pw/sequencer-compare-with-right-parent-to-check-empty-commits:
sequencer: fix empty commit check when amending
"git rev-parse --show-toplevel" run outside of any working tree did
not error out, which has been corrected.
* jk/fail-show-toplevel-outside-working-tree:
rev-parse: make --show-toplevel without a worktree an error
"git unpack-objects" used to show progress based only on the number
of received and unpacked objects, which stalled when it has to
handle an unusually large object. It now shows the throughput as
well.
* sg/unpack-progress-throughput:
builtin/unpack-objects.c: show throughput progress
CI jobs for macOS has been made less chatty when updating perforce
package used during testing.
* jc/azure-ci-osx-fix-fix:
ci(osx): update homebrew-cask repository with less noise
"git range-diff" learned to take the "--notes=<ref>" and the
"--no-notes" options to control the commit notes included in the
log message that gets compared.
* dl/range-diff-with-notes:
format-patch: pass notes configuration to range-diff
range-diff: pass through --notes to `git log`
range-diff: output `## Notes ##` header
t3206: range-diff compares logs with commit notes
t3206: s/expected/expect/
t3206: disable parameter substitution in heredoc
t3206: remove spaces after redirect operators
pretty-options.txt: --notes accepts a ref instead of treeish
rev-list-options.txt: remove reference to --show-notes
argv-array: add space after `while`
The userdiff machinery has been taught that "async def" is another
way to begin a "function" in Python.
* jh/userdiff-python-async:
userdiff: support Python async functions
The logic to avoid duplicate label names generated by "git rebase
--rebase-merges" forgot that the machinery itself uses "onto" as a
label name, which must be avoided by auto-generated labels, which
has been corrected.
* dd/rebase-merge-reserves-onto-label:
sequencer: handle rebase-merges for "onto" message
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
A label used in the todo list that are generated by "git rebase
--rebase-merges" is used as a part of a refname; the logic to come
up with the label has been tightened to avoid names that cannot be
used as such.
* js/rebase-r-safer-label:
rebase -r: let `label` generate safer labels
rebase-merges: move labels' whitespace mangling into `label_oid()`
This typo was introduced in 2153d478b7 (pkt-line: introduce
packet_read_with_status, 2018-03-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "gitweb" that forgot to escape URLs generated
based on end-user input have been corrected.
* jk/gitweb-anti-xss:
gitweb: escape URLs generated by href()
t/gitweb-lib.sh: set $REQUEST_URI
t/gitweb-lib.sh: drop confusing quotes
t9502: pass along all arguments in xss helper
The completion script (in contrib/) has been taught that "git svn"
supports the "--recursive" option.
* js/complete-svn-recursive:
completion: tab-complete "git svn --recursive"
Error handling after "git push" finishes sending the packdata and
waits for the response to the remote side has been improved.
* jk/send-pack-remote-failure:
send-pack: check remote ref status on pack-objects failure
"git fetch" codepath had a big "do not lazily fetch missing objects
when I ask if something exists" switch. This has been corrected by
marking the "does this thing exist?" calls with "if not please do not
lazily fetch it" flag.
* jt/fetch-remove-lazy-fetch-plugging:
promisor-remote: remove fetch_if_missing=0
clone: remove fetch_if_missing=0
fetch: remove fetch_if_missing=0
The completion script (in contrib/) learned that the "--onto"
option of "git rebase" can take its argument as the value of the
option.
* dl/complete-rebase-onto:
completion: learn to complete `git rebase --onto=`
Recent update to "git stash pop" made the command empty the index
when run with the "--quiet" option, which has been corrected.
* tg/stash-refresh-index:
stash: make sure we have a valid index before writing it
Handling of commit objects that use non UTF-8 encoding during
"rebase -i" has been improved.
* dd/sequencer-utf8:
sequencer: reencode commit message for am/rebase --show-current-patch
sequencer: reencode old merge-commit message
sequencer: reencode squashing commit's message
sequencer: reencode revert/cherry-pick's todo list
sequencer: reencode to utf-8 before arrange rebase's todo list
t3900: demonstrate git-rebase problem with multi encoding
configure.ac: define ICONV_OMITS_BOM if necessary
t0028: eliminate non-standard usage of printf
