A recent "filter-branch --msg-filter" broke skipping of the commit
object header, which is fixed.
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: remove multi-line headers in msg filter
There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
On a case insensitive filesystems, setting GIT_WORK_TREE variable
using a random cases that does not agree with what the filesystem
thinks confused Git that it wasn't inside the working tree.
* js/icase-wt-detection:
setup: fix "inside work tree" detection on case-insensitive filesystems
When "git am" was rewritten as a built-in, it stopped paying
attention to user.signingkey, which was fixed.
* pt/am-builtin:
am: configure gpg at startup
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
Description of the "log.follow" configuration variable in "git log"
documentation is now also copied to "git config" documentation.
* dt/log-follow-config:
log: Update log.follow doc and add to config.txt
Allocation related functions and stdio are unsafe things to call
inside a signal handler, and indeed killing the pager can cause
glibc to deadlock waiting on allocation mutex as our signal handler
tries to free() some data structures in wait_for_pager(). Reduce
these unsafe calls.
* ti/glibc-stdio-mutex-from-signal-handler:
pager: don't use unsafe functions in signal handlers
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
Very small number of options take a parameter that is optional
(which is not a great UI element as they can only appear at the end
of the command line). Add notice to documentation of each and
every one of them.
* mm/keyid-docs:
Documentation: explain optional arguments better
Documentation/grep: fix documentation of -O
Documentation: use 'keyid' consistently, not 'key-id'
All the other placeholders are already shown that way.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df062010 (filter-branch: avoid passing commit message through sed)
introduced a regression when filtering commits with multi-line headers,
if the header contains a blank line. An example of this is a gpg-signed
commit:
$ git cat-file commit signed-commit
tree 3d4038e029712da9fc59a72afbfcc90418451630
parent 110eac945dc1713b27bdf49e74e5805db66971f0
author A U Thor <author@example.com> 1112912413 -0700
committer C O Mitter <committer@example.com> 1112912413 -0700
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYXADwACgkQE7b1Hs3eQw23CACgldB/InRyDgQwyiFyMMm3zFpj
pUsAnA+f3aMUsd9mNroloSmlOgL6jIMO
=0Hgm
-----END PGP SIGNATURE-----
Adding gpg
As a consequence, "filter-branch --msg-filter cat" (which should leave the
commit message unchanged) spills the signature (after the internal blank
line) into the original commit message.
The reason is that although the signature is indented, making the line a
whitespace only line, the "read" call is splitting the line based on
the shell's IFS, which defaults to <space><tab><newline>. The leading
space is consumed and $header_line is empty, causing the "skip header
lines" loop to exit.
The rest of the commit object is then re-used as the rewritten commit
message, causing the new message to include the signature of the
original commit.
Set IFS to an empty string for the "read" call, thus disabling the word
splitting, which causes $header_line to be set to the non-empty value ' '.
This allows the loop to fully consume the header lines before
emitting the original, intact commit message.
[jc: this is literally based on MJG's suggestion]
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: James McCoy <vega.james@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A big comment at the beginning of quote.c is really
related to sq_quote_buf(), so let's move it in front
of this function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 77d604c (Enhanced sq_quote(), 10 Oct 2005), the
comment at the beginning of quote.c is broken.
Let's fix it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linked checkouts are known under the name worktree, now. Rename the test
accordingly.
Specifically, this avoids the confusion that t2026 is actually not about
pruning in or with linked checkouts aka worktress but about pruning
worktrees, i.e. about "git worktree prune" rather than "git prune".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/config.txt does not include the documentation for
log.follow that is in Documentation/git-log.txt. This commit adds the
log.follow documentation to config.txt and also updates the wording to
be consistent with the format that is followed by other boolean
configuration variables.
Signed-off-by: Eric N. Vander Weele <ericvw@gmail.com>
Acked-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rebase-todo is parsed several times with different parsers. In
principle, the user input is normalized by transform_todo_ids and
further parsing can be stricter.
In case the user wrote
pick deadbeef<TAB>commit message
the parser of transform_todo_ids was considering the sha1 to be
"deadbeef<TAB>commit", and was leaving the tab in the transformed sheet.
In practice, this went unnoticed since the actual command interpretation
was done later in do_next which did accept the tab as a separator.
Make it explicit in the code of transform_todo_ids that tabs are
accepted. This way, code that mimicks it will also accept tabs as
separator.
A similar construct appears in skip_unnecessary_picks, but this one
comes after transform_todo_ids, hence reads the normalized format, so it
needs not be changed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This currently fails: the output is 'HEAD detached at HEAD'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new builtin am ignores the user.signingkey variable: gpg is being
called with the committer details as the key ID, which may not be
correct. git_gpg_config is responsible for handling that variable and is
expected to be called on initialization by any modules that use gpg.
Signed-off-by: Renee Margaret McConahy <nepella@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit enforces MAX_XDIFF_SIZE at the
interfaces to xdiff: xdi_diff (which calls xdl_diff) and
ll_xdl_merge (which calls xdl_merge).
But we have another direct call to xdl_merge in
merge-file.c. If it were written today, this probably would
just use the ll_merge machinery. But it predates that code,
and uses slightly different options to xdl_merge (e.g.,
ZEALOUS_ALNUM).
We could try to abstract out an xdi_merge to match the
existing xdi_diff, but even that is difficult. Rather than
simply report error, we try to treat large files as binary,
and that distinction would happen outside of xdi_merge.
The simplest fix is to just replicate the MAX_XDIFF_SIZE
check in merge-file.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xdiff code is not prepared to handle extremely large
files. It uses "int" in many places, which can overflow if
we have a very large number of lines or even bytes in our
input files. This can cause us to produce incorrect diffs,
with no indication that the output is wrong. Or worse, we
may even underallocate a buffer whose size is the result of
an overflowing addition.
We're much better off to tell the user that we cannot diff
or merge such a large file. This patch covers both cases,
but in slightly different ways:
1. For merging, we notice the large file and cleanly fall
back to a binary merge (which is effectively "we cannot
merge this").
2. For diffing, we make the binary/text distinction much
earlier, and in many different places. For this case,
we'll use the xdi_diff as our choke point, and reject
any diff there before it hits the xdiff code.
This means in most cases we'll die() immediately after.
That's not ideal, but in practice we shouldn't
generally hit this code path unless the user is trying
to do something tricky. We already consider files
larger than core.bigfilethreshold to be binary, so this
code would only kick in when that is circumvented
(either by bumping that value, or by using a
.gitattribute to mark a file as diffable).
In other words, we can avoid being "nice" here, because
there is already nice code that tries to do the right
thing. We are adding the suspenders to the nice code's
belt, so notice when it has been worked around (both to
protect the user from malicious inputs, and because it
is better to die() than generate bogus output).
The maximum size was chosen after experimenting with feeding
large files to the xdiff code. It's just under a gigabyte,
which leaves room for two obvious cases:
- a diff3 merge conflict result on files of maximum size X
could be 3*X plus the size of the markers, which would
still be only about 3G, which fits in a 32-bit int.
- some of the diff code allocates arrays of one int per
record. Even if each file consists only of blank lines,
then a file smaller than 1G will have fewer than 1G
records, and therefore the int array will fit in 4G.
Since the limit is arbitrary anyway, I chose to go under a
gigabyte, to leave a safety margin (e.g., we would not want
to overflow by allocating "(records + 1) * sizeof(int)" or
similar.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call into xdiff to perform a diff, we generally lose
the return code completely. Typically by ignoring the return
of our xdi_diff wrapper, but sometimes we even propagate
that return value up and then ignore it later. This can
lead to us silently producing incorrect diffs (e.g., "git
log" might produce no output at all, not even a diff header,
for a content-level diff).
In practice this does not happen very often, because the
typical reason for xdiff to report failure is that it
malloc() failed (it uses straight malloc, and not our
xmalloc wrapper). But it could also happen when xdiff
triggers one our callbacks, which returns an error (e.g.,
outf() in builtin/rerere.c tries to report a write failure
in this way). And the next patch also plans to add more
failure modes.
Let's notice an error return from xdiff and react
appropriately. In most of the diff.c code, we can simply
die(), which matches the surrounding code (e.g., that is
what we do if we fail to load a file for diffing in the
first place). This is not that elegant, but we are probably
better off dying to let the user know there was a problem,
rather than simply generating bogus output.
We could also just die() directly in xdi_diff, but the
callers typically have a bit more context, and can provide a
better message (and if we do later decide to pass errors up,
we're one step closer to doing so).
There is one interesting case, which is in diff_grep(). Here
if we cannot generate the diff, there is nothing to match,
and we silently return "no hits". This is actually what the
existing code does already, but we make it a little more
explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
