Now that we're working with multiple hash algorithms in the same repo,
it's best if we label each object ID with its algorithm so we can
determine how to format a given object ID. Add a member called algo to
struct object_id.
Performance testing on object ID-heavy workloads doesn't reveal a clear
change in performance. Out of performance tests t0001 and t1450, there
are slight variations in performance both up and down, but all
measurements are within the margin of error.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the placeholders %ah and %ch to format author date and committer
date, like --date=human does, which provides more humanity date output.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the description for the --date/format equivalency tests added
in 466fb6742d (pretty: provide a strict ISO 8601 date format,
2014-08-29) and 0df621172d (pretty: provide short date format,
2019-11-19) to be more meaningful.
This allows us to reword the comment added in the former commit to
refer to both tests, and any other future test, such as the in-flight
--date=human format being proposed in [1].
1. http://lore.kernel.org/git/pull.939.v2.git.1619275340051.gitgitgadget@gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a needlessly complex test for the %aI/%cI date
formats (iso-strict) added in 466fb6742d (pretty: provide a strict
ISO 8601 date format, 2014-08-29) to instead use the same pattern used
to test %as/%cs since 0df621172d (pretty: provide short date format,
2019-11-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $subcommand case statement in _git_stash() is quite repetitive.
Consolidate the cases together into one catch-all case to reduce the
repetition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), the $__git_subcommand_idx variable was
introduced. Naming it after the index of the subcommand is needlessly
confusing as, when this variable is used, it is in the completion
functions for commands (e.g. _git_remote()) where for `git remote add`,
the `remote` is referred to as the command and `add` is referred to as
the subcommand.
Rename this variable so that it's obvious it's about git commands. While
we're at it, shorten up its name so that it's still readable without
being a handful to type.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to test whether the new GIT_CONFIG_SYSTEM environment variable
behaves as expected, we unset GIT_CONFIG_NOSYSTEM in one of our tests in
t1300. But because tests are not executed in a subshell, this unset
leaks into all subsequent tests and may thus cause them to fail in some
environments. These failures are easily reproducable with `make
prefix=/root test`.
Fix the issue by not using `sane_unset GIT_CONFIG_NOSYSTEM`, but instead
just manually add it to the environment of the two command invocations
which need it.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dependencies for config-list.h and command-list.h were broken
when the former was split out of the latter, which has been
corrected.
* sg/bugreport-fixes:
Makefile: add missing dependencies of 'config-list.h'
Documentation updates, with unrelated comment updates, too.
* ab/usage-error-docs:
api docs: document that BUG() emits a trace2 error event
api docs: document BUG() in api-error-handling.txt
usage.c: don't copy/paste the same comment three times
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
A bit of code clean-up and a lot of test clean-up around userdiff
area.
* ab/userdiff-tests:
blame tests: simplify userdiff driver test
blame tests: don't rely on t/t4018/ directory
userdiff: remove support for "broken" tests
userdiff tests: list builtin drivers via test-tool
userdiff tests: explicitly test "default" pattern
userdiff: add and use for_each_userdiff_driver()
userdiff style: normalize pascal regex declaration
userdiff style: declare patterns with consistent style
userdiff style: re-order drivers in alphabetical order
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AFAICT parsing the output of `git diff --name-only master...feature`
is the intended way of programmatically getting the list of files
modified
by a feature branch. It is impossible to parse text unless you know what
encoding it is in. The output encoding of diff --name-only and
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use `git for-each-ref`, every ref will allocate
its own output strbuf and error strbuf. But we can reuse
the final strbuf for each step ref's output. The error
buffer will also be reused, despite the fact that the git
will exit when `format_ref_array_item()` return a non-zero
value and output the contents of the error buffer.
The performance for `git for-each-ref` on the Git repository
itself with performance testing tool `hyperfine` changes from
23.7 ms ± 0.9 ms to 22.2 ms ± 1.0 ms. Optimization is relatively
minor.
At the same time, we apply this optimization to `git tag -l`
and `git branch -l`.
This approach is similar to the one used by 79ed0a5
(cat-file: use a single strbuf for all output, 2018-08-14)
to speed up the cat-file builtin.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inlining the exported function `show_ref_array_item()`,
which is not providing the right level of abstraction,
simplifies the API and can unlock improvements at the
former call sites.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to have git run in a fully controlled environment without any
misconfiguration, it may be desirable for users or scripts to override
global- and system-level configuration files. We already have a way of
doing this, which is to unset both HOME and XDG_CONFIG_HOME environment
variables and to set `GIT_CONFIG_NOGLOBAL=true`. This is quite kludgy,
and unsetting the first two variables likely has an impact on other
executables spawned by such a script.
The obvious way to fix this would be to introduce `GIT_CONFIG_NOGLOBAL`
as an equivalent to `GIT_CONFIG_NOSYSTEM`. But in the past, it has
turned out that this design is inflexible: we cannot test system-level
parsing of the git configuration in our test harness because there is no
way to change its location, so all tests run with `GIT_CONFIG_NOSYSTEM`
set.
Instead of doing the same mistake with `GIT_CONFIG_NOGLOBAL`, introduce
two new variables `GIT_CONFIG_GLOBAL` and `GIT_CONFIG_SYSTEM`:
- If unset, git continues to use the usual locations.
- If set to a specific path, we skip reading the normal
configuration files and instead take the path. By setting the path
to `/dev/null`, no configuration will be loaded for the respective
level.
This implements the usecase where we want to execute code in a sanitized
environment without any potential misconfigurations via `/dev/null`, but
is more flexible and allows for more usecases than simply adding
`GIT_CONFIG_NOGLOBAL`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's two callsites which assemble global config paths, once in the
config loading code and once in the git-config(1) builtin. We're about
to implement a way to override global config paths via an environment
variable which would require us to adjust both sites.
Unify both code paths into a single `git_global_config()` function which
returns both paths for `~/.gitconfig` and the XDG config file. This will
make the subsequent patch which introduces the new envvar easier to
implement.
No functional changes are expected from this patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git_etc_gitconfig()` function retrieves the system-level path of
the configuration file. We're about to introduce a way to override it
via an environment variable, at which point the name of this function
would start to become misleading.
Rename the function to `git_system_config()` as a preparatory step.
While at it, the function is also refactored to pass memory ownership to
the caller. This is done to better match semantics of
`git_global_config()`, which is going to be introduced in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has multiple objects filters specified, then this is
internally represented by having a "combined" filter. These combined
filters aren't yet supported by bitmap indices and can thus not be
accelerated.
Fix this by implementing support for these combined filters. The
implementation is quite trivial: when there's a combined filter, we
simply recurse into `filter_bitmap()` for all of the sub-filters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preceding commit has added a new object filter for git-rev-list(1)
which allows to filter objects by type. Implement the equivalent filter
for packfile bitmaps so that we can answer these queries fast.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it already is possible to filter objects by some criteria in
git-rev-list(1), it is not yet possible to filter out only a specific
type of objects. This makes some filters less useful. The `blob:limit`
filter for example filters blobs such that only those which are smaller
than the given limit are returned. But it is unfit to ask only for these
smallish blobs, given that git-rev-list(1) will continue to print tags,
commits and trees.
Now that we have the infrastructure in place to also filter tags and
commits, we can improve this situation by implementing a new filter
which selects objects based on their type. Above query can thus
trivially be implemented with the following command:
$ git rev-list --objects --filter=object:type=blob \
--filter=blob:limit=200
Furthermore, this filter allows to optimize for certain other cases: if
for example only tags or commits have been selected, there is no need to
walk down trees.
The new filter is not yet supported in bitmaps. This is going to be
implemented in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make parallel checkout configurable by introducing two new settings:
checkout.workers and checkout.thresholdForParallelism. The first defines
the number of workers (where one means sequential checkout), and the
second defines the minimum number of entries to attempt parallel
checkout.
To decide the default value for checkout.workers, the parallel version
was benchmarked during three operations in the linux repo, with cold
cache: cloning v5.8, checking out v5.8 from v2.6.15 (checkout I) and
checking out v5.8 from v5.7 (checkout II). The four tables below show
the mean run times and standard deviations for 5 runs in: a local file
system on SSD, a local file system on HDD, a Linux NFS server, and
Amazon EFS (all on Linux). Each parallel checkout test was executed with
the number of workers that brings the best overall results in that
environment.
Local SSD:
Sequential 10 workers Speedup
Clone 8.805 s ± 0.043 s 3.564 s ± 0.041 s 2.47 ± 0.03
Checkout I 9.678 s ± 0.057 s 4.486 s ± 0.050 s 2.16 ± 0.03
Checkout II 5.034 s ± 0.072 s 3.021 s ± 0.038 s 1.67 ± 0.03
Local HDD:
Sequential 10 workers Speedup
Clone 32.288 s ± 0.580 s 30.724 s ± 0.522 s 1.05 ± 0.03
Checkout I 54.172 s ± 7.119 s 54.429 s ± 6.738 s 1.00 ± 0.18
Checkout II 40.465 s ± 2.402 s 38.682 s ± 1.365 s 1.05 ± 0.07
Linux NFS server (v4.1, on EBS, single availability zone):
Sequential 32 workers Speedup
Clone 240.368 s ± 6.347 s 57.349 s ± 0.870 s 4.19 ± 0.13
Checkout I 242.862 s ± 2.215 s 58.700 s ± 0.904 s 4.14 ± 0.07
Checkout II 65.751 s ± 1.577 s 23.820 s ± 0.407 s 2.76 ± 0.08
EFS (v4.1, replicated over multiple availability zones):
Sequential 32 workers Speedup
Clone 922.321 s ± 2.274 s 210.453 s ± 3.412 s 4.38 ± 0.07
Checkout I 1011.300 s ± 7.346 s 297.828 s ± 0.964 s 3.40 ± 0.03
Checkout II 294.104 s ± 1.836 s 126.017 s ± 1.190 s 2.33 ± 0.03
The above benchmarks show that parallel checkout is most effective on
repositories located on an SSD or over a distributed file system. For
local file systems on spinning disks, and/or older machines, the
parallelism does not always bring a good performance. For this reason,
the default value for checkout.workers is one, a.k.a. sequential
checkout.
To decide the default value for checkout.thresholdForParallelism,
another benchmark was executed in the "Local SSD" setup, where parallel
checkout showed to be beneficial. This time, we compared the runtime of
a `git checkout -f`, with and without parallelism, after randomly
removing an increasing number of files from the Linux working tree. The
"sequential fallback" column below corresponds to the executions where
checkout.workers was 10 but checkout.thresholdForParallelism was equal
to the number of to-be-updated files plus one (so that we end up writing
sequentially). Each test case was sampled 15 times, and each sample had
a randomly different set of files removed. Here are the results:
sequential fallback 10 workers speedup
10 files 772.3 ms ± 12.6 ms 769.0 ms ± 13.6 ms 1.00 ± 0.02
20 files 780.5 ms ± 15.8 ms 775.2 ms ± 9.2 ms 1.01 ± 0.02
50 files 806.2 ms ± 13.8 ms 767.4 ms ± 8.5 ms 1.05 ± 0.02
100 files 833.7 ms ± 21.4 ms 750.5 ms ± 16.8 ms 1.11 ± 0.04
200 files 897.6 ms ± 30.9 ms 730.5 ms ± 14.7 ms 1.23 ± 0.05
500 files 1035.4 ms ± 48.0 ms 677.1 ms ± 22.3 ms 1.53 ± 0.09
1000 files 1244.6 ms ± 35.6 ms 654.0 ms ± 38.3 ms 1.90 ± 0.12
2000 files 1488.8 ms ± 53.4 ms 658.8 ms ± 23.8 ms 2.26 ± 0.12
From the above numbers, 100 files seems to be a reasonable default value
for the threshold setting.
Note: Up to 1000 files, we observe a drop in the execution time of the
parallel code with an increase in the number of files. This is a rather
odd behavior, but it was observed in multiple repetitions. Above 1000
files, the execution time increases according to the number of files, as
one would expect.
About the test environments: Local SSD tests were executed on an
i7-7700HQ (4 cores with hyper-threading) running Manjaro Linux. Local
HDD tests were executed on an Intel(R) Xeon(R) E3-1230 (also 4 cores
with hyper-threading), HDD Seagate Barracuda 7200.14 SATA 3.1, running
Debian. NFS and EFS tests were executed on an Amazon EC2 c5n.xlarge
instance, with 4 vCPUs. The Linux NFS server was running on a m6g.large
instance with 2 vCPUSs and a 1 TB EBS GP2 volume. Before each timing,
the linux repository was removed (or checked out back to its previous
state), and `sync && sysctl vm.drop_caches=3` was executed.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new interface allows us to enqueue some of the entries being
checked out to later uncompress them, apply in-process filters, and
write out the files in parallel. For now, the parallel checkout
machinery is enabled by default and there is no user configuration, but
run_parallel_checkout() just writes the queued entries in sequence
(without spawning additional workers). The next patch will actually
implement the parallelism and, later, we will make it configurable.
Note that, to avoid potential data races, not all entries are eligible
for parallel checkout. Also, paths that collide on disk (e.g.
case-sensitive paths in case-insensitive file systems), are detected by
the parallel checkout code and skipped, so that they can be safely
sequentially handled later. The collision detection works like the
following:
- If the collision was at basename (e.g. 'a/b' and 'a/B'), the framework
detects it by looking for EEXIST and EISDIR errors after an
open(O_CREAT | O_EXCL) failure.
- If the collision was at dirname (e.g. 'a/b' and 'A'), it is detected
at the has_dirs_only_path() check, which is done for the leading path
of each item in the parallel checkout queue.
Both verifications rely on the fact that, before enqueueing an entry for
parallel checkout, checkout_entry() makes sure that there is no file at
the entry's path and that its leading components are all real
directories. So, any later change in these conditions indicates that
there was a collision (either between two parallel-eligible entries or
between an eligible and an ineligible one).
After all parallel-eligible entries have been processed, the collided
(and thus, skipped) entries are sequentially fed to checkout_entry()
again. This is similar to the way the current code deals with
collisions, overwriting the previously checked out entries with the
subsequent ones. The only difference is that, since we no longer create
the files in the same order that they appear on index, we are not able
to determine which of the colliding entries will survive on disk (for
the classic code, it is always the last entry).
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document changes in -m and --diff-merges=m semantics, as well as new
--diff-merges=on option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let -m option (and --diff-merges=m) enable the default format instead
of "separate", to be able to tune it with log.diffMerges option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split set_diff_merges() into separate parsing and execution functions,
the former to be reused for parsing of configuration values later in
the patch series.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the notion of default diff format for merges, and the option
"on" to select it. The default format is "separate" and can't yet
be changed, so effectively "on" is just a synonym for "separate"
for now. Add corresponding test to t4013.
This is in preparation for introducing log.diffMerges configuration
option that will let --diff-merges=on to be configured to any
supported format.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
Various rename detection optimization to help "ort" merge strategy
backend.
* en/ort-perf-batch-10:
diffcore-rename: determine which relevant_sources are no longer relevant
merge-ort: record the reason that we want a rename for a file
diffcore-rename: add computation of number of unknown renames
diffcore-rename: check if we have enough renames for directories early on
diffcore-rename: only compute dir_rename_count for relevant directories
merge-ort: record the reason that we want a rename for a directory
merge-ort, diffcore-rename: tweak dirs_removed and relevant_source type
diffcore-rename: take advantage of "majority rules" to skip more renames
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote has the skipFetchAll setting enabled, then that remote is
not intended for frequent fetching. It makes sense to not fetch that
data during the 'prefetch' maintenance task. Skip that remote in the
iteration without error. The skip_default_update member is initialized
in remote.c:handle_config() as part of initializing the 'struct remote'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --prefetch option will be used by the 'prefetch' maintenance task
instead of sending refspecs explicitly across the command-line. The
intention is to modify the refspec to place all results in
refs/prefetch/ instead of anywhere else.
Create helper method filter_prefetch_refspec() to modify a given refspec
to fit the rules expected of the prefetch task:
* Negative refspecs are preserved.
* Refspecs without a destination are removed.
* Refspecs whose source starts with "refs/tags/" are removed.
* Other refspecs are placed within "refs/prefetch/".
Finally, we add the 'force' option to ensure that prefetch refs are
replaced as necessary.
There are some interesting cases that are worth testing.
An earlier version of this change dropped the "i--" from the loop that
deletes a refspec item and shifts the remaining entries down. This
allowed some refspecs to not be modified. The subtle part about the
first --prefetch test is that the "refs/tags/*" refspec appears directly
before the "refs/heads/bogus/*" refspec. Without that "i--", this
ordering would remove the "refs/tags/*" refspec and leave the last one
unmodified, placing the result in "refs/heads/*".
It is possible to have an empty refspec. This is typically the case for
remotes other than the origin, where users want to fetch a specific tag
or branch. To correctly test this case, we need to further remove the
upstream remote for the local branch. Thus, we are testing a refspec
that will be deleted, leaving nothing to fetch.
Helped-by: Tom Saeger <tom.saeger@oracle.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently this is not supported with Microsoft's Universal C Runtime.
So let's not actually do that.
Instead, just return success because we _know_ that we expect the `NUL`
device to be present.
Side note: it is possible to turn off the "Null device driver" and
thereby disable `NUL`. Too many things are broken if this driver is
disabled, therefore it is not worth bothering to try to detect its
presence when `access()` is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
