Add missing colon to ensure correct rendering of definition list
item. Without the proper number of colons, it renders as just another
top-level paragraph rather than a list item.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comand uses a single instance of rev_info on stack, makes a
single revision traversal and exit. Mark the resources held by the
rev_info structure with UNLEAK().
We do not do this at lower level in revision.c or cmd_log_walk(), as
a new caller of the revision traversal API can make unbounded number
of rev_info during a single run, and UNLEAK() would not a be
suitable mechanism to deal with such a caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we marked that this patch-id test is leak-sanitizer clean,
but if we read the test script carefully, it is merely because we
have too many invocations of commands in the "git log" family on the
upstream side of the pipe, hiding breakages from them.
Split the pipeline so that breakages from these commands can be
caught (not limited to aborts due to leak-sanitizer) and unmark
the script as not passing the test with leak-sanitizer in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RCS keywords are strings that are replaced with information from
Perforce. Examples include $Date$, $Author$, $File$, $Change$ etc.
Perforce resolves these by expanding them with their expanded values
when files are synced, but Git's data model requires these expanded
values to be converted back into their unexpanded form.
Previously, git-p4.py would implement this behaviour through the use of
regular expressions. However, the regular expression substitution was
applied using decoded strings i.e. the content of incoming commit diffs
was first decoded from bytes into UTF-8, processed with regular
expressions, then converted back to bytes.
Not only is this behaviour inefficient, but it is also a cause of a
common issue caused by text files containing invalid UTF-8 data. For
files created in Windows, CP1252 Smart Quote Characters (0x93 and 0x94)
are seen fairly frequently. These codes are invalid in UTF-8, so if the
script encountered any file containing them, on Python 2 the symbols
will be corrupted, and on Python 3 the script will fail with an
exception.
This patch replaces this decoding/encoding with bytes object regular
expressions, so that the substitution is performed directly upon the
source data with no conversions.
A test for smart quote handling has been added to the
t9810-git-p4-rcs.sh test suite.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patchRCSKeywords method creates a temporary file in which to store
the patched output data. Previously this file was opened in "w+" mode
(write and read), but the code never reads the contents of the file
while open, so it only needs to be opened in "w" mode (write-only).
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the read_lines function always decoded the result lines. In
order to improve support for non-decoded binary processing of data in
git-p4.py, this patch adds a raw option to the function that allows
decoding to be disabled.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously git-p4.py would compile one of two regular expressions for
ever RCS keyword-enabled file. This patch improves simplifies the code
by pre-compiling the two regular expressions when the script first
loads.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python with statements are used to wrap the execution of a block of code
so that an object can be safely released when execution leaves the
scope.
They are desirable for improving code tidyness, and to ensure that
objects are properly destroyed even when exceptions are thrown.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage message emitted by "git stash --invalid-option" to
emit usage information for "git stash" in general, and not just for
the "push" command. I.e. before:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--] [<pathspec>...]]
[...]
After:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
or: git stash drop [-q|--quiet] [<stash>]
or: git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: git stash branch <branchname> [<stash>]
or: git stash clear
or: git stash [push [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]]
or: git stash save [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
[...]
That we emitted the usage for just "push" in the case of the
subcommand not being explicitly specified was an unintentional
side-effect of how it was implemented. When it was converted to C in
d553f538b8 (stash: convert push to builtin, 2019-02-25) the pattern
of having per-subcommand usage information was rightly continued. The
"git-stash.sh" shellscript did not have that, and always printed the
equivalent of "git_stash_usage".
But in doing so the case of push being implicit and explicit was
conflated. A variable was added to track this in 8c3713cede (stash:
eliminate crude option parsing, 2020-02-17), but it did not update the
usage output accordingly.
This still leaves e.g. "git stash push -h" emitting the
"git_stash_usage" output, instead of "git_stash_push_usage". That
should be fixed, but is a much deeper misbehavior in parse_options()
not being aware of subcommands at all. I.e. in how
PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_NO_INTERNAL_HELP combine in
commands such as "git stash".
Perhaps PARSE_OPT_KEEP_UNKNOWN should imply
PARSE_OPT_NO_INTERNAL_HELP, or better yet parse_options() should be
extended to fully handle these subcommand cases that we handle
manually in "git stash", "git commit-graph", "git multi-pack-index"
etc. All of those musings would be a much bigger change than this
isolated fix though, so let's leave that for some other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three callsites of git_prompt() helper function that ask a
"yes/no" question to the end user, but one of them in help.c that
asks if the suggested auto-correction is OK, which is given when the
user makes a possible typo in a Git subcommand name, is formatted
differently from the others.
Update the format string to make the prompt string look more
consistent.
Signed-off-by: Kashav Madan <kshvmdn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option helps to record specific empty patches in the middle
of an am session, which does create empty commits only when:
1. the index has not changed
2. lacking a branch
When the index has changed, "--allow-empty" will create a non-empty
commit like passing "--continue" or "--resolved".
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since that the command 'git-format-patch' can include patches of
commits that emit no changes, the 'git-am' command should also
support an option, named as '--empty', to specify how to handle
those empty patches. In this commit, we have implemented three
valid options ('stop', 'drop' and 'keep').
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit has described how to use '--always' option in the command
'git-format-patch' to include patches for commits that emit no changes.
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion for gpg.ssh.allowedSignersFile shows an example string
that contains "user1@example.com,user2@example.com". Asciidoc thinks
these are real email addresses and generates "mailto" footnotes for
them. This makes the rendered content more confusing, as it has extra
"[1]" markers:
The file consists of one or more lines of principals followed by an
ssh public key. e.g.: user1@example.com[1],user2@example.com[2]
ssh-rsa AAAAX1... See ssh-keygen(1) "ALLOWED SIGNERS" for details.
and also generates pointless notes at the end of the page:
NOTES
1. user1@example.com
mailto:user1@example.com
2. user2@example.com
mailto:user2@example.com
We can fix this by putting the example into a backtick literal block.
That inhibits the mailto generation, and as a bonus typesets the example
text in a way that sets it off from the regular prose (a tt font for
html, or bold in the roff manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serving a fetch, git upload-pack copies data from a git
pack-objects stdout pipe to its stdout. This commit increases the size
of the buffer used for that copying from 8192 to 65515, the maximum
sideband-64k packet size.
Previously, this buffer was allocated on the stack. Because the new
buffer size is nearly 64KB, we switch this to a heap allocation.
On GitLab.com we use GitLab's pack-objects cache which does writes of
65515 bytes. Because of the default 8KB buffer size, propagating these
cache writes requires 8 pipe reads and 8 pipe writes from
git-upload-pack, and 8 pipe reads from Gitaly (our Git RPC service).
If we increase the size of the buffer to the maximum Git packet size,
we need only 1 pipe read and 1 pipe write in git-upload-pack, and 1
pipe read in Gitaly to transfer the same amount of data. In benchmarks
with a pure fetch and 100% cache hit rate workload we are seeing CPU
utilization reductions of over 30%.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commits marked `sparse-checkout init` as deprecated; we
can just use `set` instead here and pass it no paths.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, using separate `init` and `set` steps
with sparse-checkout result in a number of issues. The previous commits
made `set` able to handle the work of both commands, and enabled reapply
to tweak the {cone,sparse-index} settings. Update the documentation to
reflect this, and mark `init` as deprecated.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to switch to or from cone mode, or to or from a
sparse-index without changing their sparsity paths. Allow them to do so
using the reapply command.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previously suggested workflow:
git sparse-checkout init ...
git sparse-checkout set ...
Suffered from three problems:
1) It would delete nearly all files in the first step, then
restore them in the second. That was poor performance and
forced unnecessary rebuilds.
2) The two-step process resulted in two progress bars, which
was suboptimal from a UI point of view for wrappers that
invoked both of these commands but only exposed a single
command to their end users.
3) With cone mode, the first step would delete nearly all
ignored files everywhere, because everything was considered
to be outside of the specified sparsity paths. (The user was
not allowed to specify any sparsity paths in the `init` step.)
Avoid these problems by teaching `set` to understand the extra
parameters that `init` takes and performing any necessary initialization
if not already in a sparse checkout.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`init` has some code for handling updates to either cone mode or
the sparse-index setting. We would like to be able to reuse this
elsewhere, namely in `set` and `reapply`. Split this function out,
and make it slightly more general so it can handle being called from
the new callers.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We intentionally added --stdin as an option to `sparse-checkout set`,
but didn't intend for --no-stdin to be permitted as well.
Reported-by: Victoria Dye <vdye@github.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sparse_checkout_set() was reused by sparse_checkout_add() with the only
difference being a single parameter being passed to that function.
However, we would like sparse_checkout_set() to do the same work that
sparse_checkout_init() does if sparse checkouts are not already enabled.
To facilitate this transition, give each mode their own copy of the
function. This does not introduce any behavioral changes; that will
come in a subsequent patch.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_patterns_from_input() has relied on a global variable,
set_opts.use_stdin, which has been used by both the `set` and `add`
subcommands of sparse-checkout. Once we introduce an
add_opts.use_stdin, the hardcoding of set_opts.use_stdin will be
incorrect. Pass the value as function parameter instead to allow us to
make subsequent changes.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/die-with-bug:
object.c: use BUG(...) no die("BUG: ...") in lookup_object_by_type()
pathspec: use BUG(...) not die("BUG:%s:%d....", <file>, <line>)
strbuf.h: use BUG(...) not die("BUG: ...")
pack-objects: use BUG(...) not die("BUG: ...")
The test helper for refs subsystem learned to write bogus and/or
nonexistent object name to refs to simulate error situations we
want to test Git in.
* hn/allow-bogus-oid-in-ref-tests:
t1430: create valid symrefs using test-helper
t1430: remove refs using test-tool
refs: introduce REF_SKIP_REFNAME_VERIFICATION flag
refs: introduce REF_SKIP_OID_VERIFICATION flag
refs: update comment.
test-ref-store: plug memory leak in cmd_delete_refs
test-ref-store: parse symbolic flag constants
test-ref-store: remove force-create argument for create-reflog
Change the type of an internal function to return an enum (instead
of int) and replace -2 that was used to signal an error with -1.
* ab/parse-options-cleanup:
parse-options.c: use "enum parse_opt_result" for parse_nodash_opt()
"default" and "reset" colors have been added to our palette.
* re/color-default-reset:
color: allow colors to be prefixed with "reset"
color: support "default" to restore fg/bg color
color: add missing GIT_COLOR_* white/black constants
Document the parameters given to the reflog entry iterator callback
functions.
* jc/reflog-iterator-callback-doc:
refs: document callback for reflog-ent iterators
The sparse-index/sparse-checkout feature had a bug in its use of
the matching code to determine which path is in or outside the
sparse checkout patterns.
* ds/sparse-deep-pattern-checkout-fix:
unpack-trees: use traverse_path instead of name
t1092: add deeper changes during a checkout
Coding guideline document has been updated to clarify what goes to
standard error in our system.
* es/doc-stdout-vs-stderr:
CodingGuidelines: document which output goes to stdout vs. stderr
Many tests that used to need GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
mechanism to force "git" to use 'master' as the default name for
the initial branch no longer need it; the use of the mechanism from
them have been removed.
* js/test-initial-branch-override-cleanup:
tests: set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME only when needed
"git worktree add" showed "Preparing worktree" message to the
standard output stream, but when it failed, the message from die()
went to the standard error stream. Depending on the order the
stdio streams are flushed at the program end, this resulted in
confusing output. It has been corrected by sending all the chatty
messages to the standard error stream.
* es/worktree-chatty-to-stderr:
git-worktree.txt: add missing `-v` to synopsis for `worktree list`
worktree: send "chatty" messages to stderr
Drop support for TravisCI and update test workflows at GitHub.
* ab/ci-updates:
CI: don't run "make test" twice in one job
CI: use "$runs_on_pool", not "$jobname" to select packages & config
CI: rename the "Linux32" job to lower-case "linux32"
CI: use shorter names that fit in UX tooltips
CI: remove Travis CI support
Prepare tests on ref API to help testing reftable backends.
* hn/reflog-tests:
refs/debug: trim trailing LF from reflog message
test-ref-store: tweaks to for-each-reflog-ent format
t1405: check for_each_reflog_ent_reverse() more thoroughly
test-ref-store: don't add newline to reflog message
show-branch: show reflog message
When the "git push" command is killed while the receiving end is
trying to report what happened to the ref update proposals, the
latter used to die, due to SIGPIPE. The code now ignores SIGPIPE
to increase our chances to run the post-receive hook after it
happens.
* rj/receive-pack-avoid-sigpipe-during-status-reporting:
receive-pack: ignore SIGPIPE while reporting status to client
API clean-up.
* ab/run-command:
run-command API: remove "env" member, always use "env_array"
difftool: use "env_array" to simplify memory management
run-command API: remove "argv" member, always use "args"
run-command API users: use strvec_push(), not argv construction
run-command API users: use strvec_pushl(), not argv construction
run-command tests: use strvec_pushv(), not argv assignment
run-command API users: use strvec_pushv(), not argv assignment
upload-archive: use regular "struct child_process" pattern
worktree: stop being overly intimate with run_command() internals
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
The default setting for trace2 event nesting was too low to cause
test failures, which is worked around by bumping it up in the test
framework.
* ds/trace2-regions-in-tests:
t/t*: remove custom GIT_TRACE2_EVENT_NESTING
test-lib.sh: set GIT_TRACE2_EVENT_NESTING
The test framework learns to list unsatisfied test prerequisites,
and optionally error out when prerequisites that are expected to be
satisfied are not.
* fs/test-prereq:
test-lib: make BAIL_OUT() work in tests and prereq
test-lib: introduce required prereq for test runs
test-lib: show missing prereq summary
More tests are marked as leak-free.
* ab/mark-leak-free-tests-even-more:
leak tests: mark some fast-import tests as passing with SANITIZE=leak
leak tests: mark some config tests as passing with SANITIZE=leak
leak tests: mark some status tests as passing with SANITIZE=leak
leak tests: mark some clone tests as passing with SANITIZE=leak
leak tests: mark some add tests as passing with SANITIZE=leak
leak tests: mark some diff tests as passing with SANITIZE=leak
leak tests: mark some apply tests as passing with SANITIZE=leak
leak tests: mark some notes tests as passing with SANITIZE=leak
leak tests: mark some update-index tests as passing with SANITIZE=leak
leak tests: mark some rev-parse tests as passing with SANITIZE=leak
leak tests: mark some rev-list tests as passing with SANITIZE=leak
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark most gettext tests as passing with SANITIZE=leak
leak tests: mark "sort" test as passing SANITIZE=leak
leak tests: mark a read-tree test as passing SANITIZE=leak
The "reftable" backend for the refs API, without integrating into
the refs subsystem, has been added.
* hn/reftable:
Add "test-tool dump-reftable" command.
reftable: add dump utility
reftable: implement stack, a mutable database of reftable files.
reftable: implement refname validation
reftable: add merged table view
reftable: add a heap-based priority queue for reftable records
reftable: reftable file level tests
reftable: read reftable files
reftable: generic interface to tables
reftable: write reftable files
reftable: a generic binary tree implementation
reftable: reading/writing blocks
Provide zlib's uncompress2 from compat/zlib-compat.c
reftable: (de)serialization for the polymorphic record type.
reftable: add blocksource, an abstraction for random access reads
reftable: utility functions
reftable: add error related functionality
reftable: add LICENSE
hash.h: provide constants for the hash IDs
