Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from the tests is coloured using "green is okay, yellow is
questionable, red is bad and blue is informative" scheme.
* as/test-tweaks:
tests: paint unexpectedly fixed known breakages in bold red
tests: test the test framework more thoroughly
tests: refactor mechanics of testing in a sub test-lib
tests: change info messages from yellow/brown to cyan
tests: paint skipped tests in blue
tests: paint known breakages in yellow
tests: test number comes first in 'not ok $count - $message'
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only try to get branch name in "format-patch origin" case or
similar and not "format-patch -22" where HEAD is automatically
added. Without correct branch name, branch description cannot be
added. Make sure we always get branch name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_branch_name() assumes to take refs/heads/<branch>. But we also
have symbolic refs, such as HEAD, that can point to a valid branch in
refs/heads and do not follow refs/heads/<branch> syntax. Remove the
assumption and apply normal ref resolution. After all it would be
confusing if rev machinery resolves a ref in one way and
find_branch_name() another.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the perl script "check-non-portable-shell.pl" to detect
non-portable shell syntax.
"echo -n" is an example of a shell command working on Linux, but not
on Mac OS X.
These shell commands are checked and reported as error:
- "echo -n" (printf should be used)
- "sed -i" (GNUism; use a temp file instead)
- "declare" (bashism, often used with arrays)
- "which" (unreliable exit status and output; use type instead)
- "test a == b" (bashism for "test a = b")
"make test-lint-shell-syntax" can be used to run only the check.
Helped-By: Jeff King <peff@peff.net>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line to be wrapped has a solid run of non space characters
whose length exactly is the wrap width, "git shortlog -w" failed to
add a newline after such a line.
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
After "git add -N" and then writing a tree object out of the
index, the cache-tree data structure got corrupted.
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
The --graph code fell into infinite loop when asked to do what the
code did not expect.
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
t9200 runs "cvs init" on a directory that already exists, but a
platform can configure this fail for the current user (e.g. you need
to be in the cvsadmin group on NetBSD 6.0).
* jc/test-cvs-no-init-in-existing-dir:
t9200: let "cvs init" create the test repository
t4014, t9502 and t0200 tests had various portability issues that
broke on OpenBSD.
* jc/maint-test-portability:
t4014: fix arguments to grep
t9502: do not assume GNU tar
t0200: "locale" may not exist
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()
sed -i is not portable on all systems. Use sed with different input
and output files. Utilize a tmp file whenever needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test all possible use-cases of git-status "--ignored" with the
"--untracked-files" option with values "normal" and "all":
- An untracked directory is listed as untracked if it has a mix of
untracked and ignored files in it. With -uall, ignored/untracked
files are listed as ignored/untracked.
- An untracked directory with only ignored files is listed as
ignored. With -uall, all files in the directory are listed.
- An ignored directory is listed as ignored. With -uall, all files
in the directory are listed as ignored.
- An ignored and committed directory is listed as ignored if it has
untracked files. With -uall, all untracked files in the
directory are listed as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally when we match "*X" on "abcX", we call dowild("X", "abcX"),
dowild("X", "bcX"), dowild("X", "cX") and dowild("X", "X"). Only the
last call may have a chance of matching. By skipping the text before
"X", we can eliminate the first three useless calls.
compat, '*/*/*' on linux-2.6.git file list 2000 times, before:
wildmatch 7s 985049us
fnmatch 2s 735541us or 34.26% faster
and after:
wildmatch 4s 492549us
fnmatch 0s 888263us or 19.77% slower
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally we need recursion for "*". In this case we know that it
matches everything until "/" so we can skip the recursion.
glibc, '*/*/*' on linux-2.6.git file list 2000 times
before:
wildmatch 8s 74513us
fnmatch 1s 97042us or 13.59% faster
after:
wildmatch 3s 521862us
fnmatch 3s 488616us or 99.06% slower
Same test with compat/fnmatch:
wildmatch 8s 110763us
fnmatch 2s 980845us or 36.75% faster
wildmatch 3s 522156us
fnmatch 1s 544487us or 43.85% slower
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, wildmatch() has always honoured directory boundary and there
was no way to turn it off. Make it behave more like fnmatch() by
requiring all callers that want the FNM_PATHNAME behaviour to pass
that in the equivalent flag WM_PATHNAME. Callers that do not specify
WM_PATHNAME will get wildcards like ? and * in their patterns matched
against '/', just like not passing FNM_PATHNAME to fnmatch().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"**" is adjusted to only be effective when surrounded by slashes, in
40bbee0 (wildmatch: adjust "**" behavior - 2012-10-15). Except that
the commit did it wrong:
1. when it checks for "the preceding slash unless ** is at the
beginning", it compares to wrong pointer. It should have compared
to the beginning of the pattern, not the text.
2. prev_p points to the character before "**", not the first "*". The
correct comparison must be "prev_p < pattern" or
"prev_p + 1 == pattern", not "prev_p == pattern".
3. The pattern must be surrounded by slashes unless it's at the
beginning or the end of the pattern. We do two checks: one for the
preceding slash and one the trailing slash. Both checks must be
met. The use of "||" is wrong.
This patch fixes all above.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing aliases in t/t1020-subdirectory.sh use longer names so that
they're less likely to conflict with a git-* command somewhere in the
$PATH.
I have a git-ss command in my path which prevents the 'ss' alias from
being used. This command will always fail for git.git, causing the test
to fail. Even if the command succeeded, that would be a false success
for the test since the alias wasn't actually used. A longer, more
descriptive name will make it much less likely that somebody has a
command in their $PATH which will shadow the alias created for the test.
While here, use a longer name for the 'test' alias as well since that is
also short and meaningful enough to make it not unlikely that somebody
would have a command in their $PATH which will shadow that as well.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit documented two known breakages revolving around
a case where one side flips a tree into a blob (or vice versa),
where the original code simply gets confused and feeds a mixture of
trees and blobs into either the recursive merge-tree (and recursing
into the blob will fail) or three-way merge (and merging tree contents
together with blobs will fail).
Fix it by feeding trees (and only trees) into the recursive
merge-tree machinery and blobs (and only blobs) into the three-way
content level merge machinery separately; when this happens, the
entire merge has to be marked as conflicting at the structure level.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "branch1" parameter given to resolve() to "ours", to
clarify what is going on. Also, annotate the unresolved_directory()
function with some comments to show what decisions are made in each
step, and highlight two bugs that need to be fixed.
Add two tests to t4300 to illustrate these bugs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (e.g. NetBSD 6.0) seem to configure their CVS to
allow "cvs init" in an existing directory only to members of
"cvsadmin".
Instead of preparing an empty directory and then running "cvs init"
on it, let's run "cvs init" and let it create the necessary
directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-picking into an unborn branch should work, so make it work,
with or without --ff.
Cherry-picking anything other than a commit that only adds files, will
naturally result in conflicts. Similarly, revert also works, but will
result in conflicts unless the specified revision only deletes files.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function for checking that two given parameters refer to the same
revision was defined in several places, so move the definition to
test-lib-functions.sh instead.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change color of unexpectedly fixed known breakages to bold red. An
unexpectedly passing test indicates that the test code is somehow
broken or out of sync with the code it is testing. Either way this is
an error which is potentially as bad as a failing test, and as such is
no longer portrayed as a pass in the output.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 5 new full test suite runs each with a different number of
passing/failing/broken/fixed tests, in order to ensure that the
correct exit code and output are generated in each case. As before,
these are run in a subdirectory to avoid disrupting the metrics for
the parent tests.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow us to test the test framework more thoroughly
without disrupting the top-level test metrics.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've adopted a "traffic lights" coloring scheme, yellow is
used for warning messages, so we need to re-color info messages to
something less alarmist. Blue is a universal color for informational
messages; however we are using that for skipped tests in order to
align with the color schemes of other test suites. Therefore we use
cyan which is also blue-ish, but visually distinct from blue.
This was suggested on the list a while ago and no-one raised any
objections:
http://thread.gmane.org/gmane.comp.version-control.git/205675/focus=205966
An earlier iteration of this patch used bold cyan, but the point of
this change is to make them less alarming; let's drop the boldness.
Also paint the message to report skipping the whole thing via
GIT_SKIP_TESTS mechanism in the same color as the "info" color
that is used on the final summary line for the entire script.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skipped tests indicate incomplete test coverage. Whilst this is not a
test failure or other error, it's still not a complete success.
Other testsuite related software like automake, autotest and prove
seem to use blue for skipped tests, so let's follow suit.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yellow seems a more appropriate color than bold green when
considering the universal traffic lights coloring scheme, where
green conveys the impression that everything's OK, and amber that
something's not quite right.
Likewise, change the color of the summarized total number of known
breakages from bold red to the same yellow to be less alarmist and
more consistent with the above.
An earlier version of this patch used bold yellow but because these
are all long-known failures, reminding them to developers in bold
over and over does not help encouraging them to take a look at them
very much. This iteration paints them in plain yellow instead to
make them less distracting.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to easily record a submodule.<name>.branch option in
.gitmodules when you add a new submodule. With this patch,
$ git submodule add -b <branch> <repository> [<path>]
$ git config -f .gitmodules submodule.<path>.branch <branch>
reduces to
$ git submodule add -b <branch> <repository> [<path>]
This means that future calls to
$ git submodule update --remote ...
will get updates from the same branch that you used to initialize the
submodule, which is usually what you want.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current `update` command incorporates the superproject's gitlinked
SHA-1 ($sha1) into the submodule HEAD ($subsha1). Depending on the
options you use, it may checkout $sha1, rebase the $subsha1 onto
$sha1, or merge $sha1 into $subsha1. This helps you keep up with
changes in the upstream superproject.
However, it's also useful to stay up to date with changes in the
upstream subproject. Previous workflows for incorporating such
changes include the ungainly:
$ git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
With this patch, all of the useful functionality for incorporating
superproject changes can be reused to incorporate upstream subproject
updates. When you specify --remote, the target $sha1 is replaced with
a $sha1 of the submodule's origin/master tracking branch. If you want
to merge a different tracking branch, you can configure the
`submodule.<name>.branch` option in `.gitmodules`. You can override
the `.gitmodules` configuration setting for a particular superproject
by configuring the option in that superproject's default configuration
(using the usual configuration hierarchy, e.g. `.git/config`,
`~/.gitconfig`, etc.).
Previous use of submodule.<name>.branch
=======================================
Because we're adding a new configuration option, it's a good idea to
check if anyone else is already using the option. The foreach-pull
example above was described by Ævar in
commit f030c96d86
Author: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri May 21 16:10:10 2010 +0000
git-submodule foreach: Add $toplevel variable
Gerrit uses the same interpretation for the setting, but because
Gerrit has direct access to the subproject repositories, it updates
the superproject repositories automatically when a subproject changes.
Gerrit also accepts the special value '.', which it expands into the
superproject's branch name.
Although the --remote functionality is using `submodule.<name>.branch`
slightly differently, the effect is the same. The foreach-pull
example uses the option to record the name of the local branch to
checkout before pulls. The tracking branch to be pulled is recorded
in `.git/modules/<name>/config`, which was initialized by the module
clone during `submodule add` or `submodule init`. Because the branch
name stored in `submodule.<name>.branch` was likely the same as the
branch name used during the initial `submodule add`, the same branch
will be pulled in each workflow.
Implementation details
======================
In order to ensure a current tracking branch state, `update --remote`
fetches the submodule's remote repository before calculating the
SHA-1. However, I didn't change the logic guarding the existing fetch:
if test -z "$nofetch"
then
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
There will not be a double-fetch, because the new $sha1 determined
after the `--remote` triggered fetch should always exist in the
repository. If it doesn't, it's because some racy process removed it
from the submodule's repository and we *should* be re-fetching.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper svnrdump_sim.py is used as "svnrdump" during the
execution of this test, but the arrangement was not optimal:
- it relied on symbolic links;
- unportable "export VAR=VAL" was used;
- GIT_BUILD_DIR variable was not quoted correctly;
- it assumed that the Python interpreter is in /usr/bin/ and
called "python" (i.e. not "python2.7" etc.)
Rework this by writing a small shell script that spawns the right
Python interpreter, using the right quoting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With d4a7ffa (tests: "cp -a" is a GNUism, 2012-10-08), we got rid of
most of them, but the ones in a topic that was still in flight were
missed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These "expect-failure" tests were not looking for the right string
in the patch file. For example:
grep "^ *"S. E. Cipient" <scipient@example.com>\$" patch5
was looking for "^ *S." in these three files:
"E."
"Cipient <scipient@example.com>$"
"patch5"
With some implementations of grep, the lack of file "E." was
reported as an error, leading to the failure of the test.
With other implementations of grep, the pattern "^ *S." matched what
was in patch5, without diagnosing the missing files as an error, and
made these tests unexpectedly pass.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check_snapshot function makes sure that no cruft outside the
repository hierarchy is added to the tar archive. The output from
"tar tf" on the resulting archive is inspected to see if there is
anything that does not begin with "$prefix/".
There are two issues with this implementation:
- Traditional tar implemenations that do not understand
pax_global_header will write it out as if it is a plain file at
the top-level;
- Some implementations of tar do not add trailing slash when
showing a directory entry (i.e. the output line for the entire
archive will show "$prefix", not "$prefix/").
Fix them so that what we want to validate can be tested with
traditional tar implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems without "locale" installed, t0200-gettext-basic.sh leaked
error messages when checking if some test locales are available.
Hide them, as they are not very useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests themselves are properly protected by the GPG
prerequisite, but one of the set-up steps outside the
test_expect_success block unconditionally assumed that there is a
gpghome/ directory, which is not true if GPG is not being used.
It may be a good idea to move the whole set-up steps in the test but
that is a follow-up topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -p -S<string>" now looks for the <string> after applying
the textconv filter (if defined); earlier it inspected the contents
of the blobs without filtering.
The manpage of gitattributes says: "The rules how the pattern
matches paths are the same as in .gitignore files" and the gitignore
pattern matching has a pattern ending with / for directory matching.
This rule is specifically relevant for the 'export-ignore' rule used
for git archive.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_format function did not indent its in-line test
script in an attempt to make the output of the test look
better. But it does not make a big difference to the output,
and the source looks quite ugly. Let's use our normal
indenting instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old output to say "not ok - 1 messsage" was working by accident
only because the test numbers are optional in TAP.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Intent-to-add entries used to forbid writing trees so it was not a
problem. After commit 3f6d56d (commit: ignore intent-to-add entries
instead of refusing - 2012-02-07), we can generate trees from an index
with i-t-a entries.
However, the commit forgets to invalidate all paths leading to i-t-a
entries. With fully valid cache-tree (e.g. after commit or
write-tree), diff operations may prefer cache-tree to index and not
see i-t-a entries in the index, because cache-tree does not have them.
Reported-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The failing tests make use of a POSIX character class, '[:xdigit:]'
in this case, which some versions of the fnmatch() library function
do not support. In the spirit of commit f1cf7b79 ("t3070: disable
unreliable fnmatch tests", 15-10-2012), we disable the fnmatch() half
of these tests.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for mailmap.blob is to let users of bare
repositories use the mailmap feature, as they would not have
a checkout containing the .mailmap file. We can make it even
easier for them by just looking in HEAD:.mailmap by default.
We can't know for sure that this is where they would keep a
mailmap, of course, but it is the best guess (and it matches
the non-bare behavior, which reads from HEAD:.mailmap in the
working tree). If it's missing, git will silently ignore the
setting.
We do not do the same magic in the non-bare case, because:
1. In the common case, HEAD:.mailmap will be the same as
the .mailmap in the working tree, which is a no-op.
2. In the uncommon case, the user has modified .mailmap
but not yet committed it, and would expect the working
tree version to take precedence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository cloned from somewhere else, you typically have a
symbolic ref refs/remotes/origin/HEAD pointing at the 'master'
remote-tracking ref that is next to it. When fetching into such a
repository with "git fetch --mirror" from another repository that
was similarly cloned, the implied wildcard refspec refs/*:refs/*
will end up asking to update refs/remotes/origin/HEAD with the
object at refs/remotes/origin/HEAD at the remote side, while asking
to update refs/remotes/origin/master the same way. Depending on the
order the two updates happen, the latter one would find that the
value of the ref before it is updated has changed from what the code
expects.
When the user asks to update the underlying ref via the symbolic ref
explicitly without using a wildcard refspec, e.g. "git fetch $there
refs/heads/master:refs/remotes/origin/HEAD", we should still let him
do so, but when expanding wildcard refs, it will result in a more
intuitive outcome if we simply ignore local symbolic refs.
As the purpose of the symbolic ref refs/remotes/origin/HEAD is to
follow the ref it points at (e.g. refs/remotes/origin/master), its
value would change when the underlying ref is updated.
Earlier commit da3efdb (receive-pack: detect aliased updates which
can occur with symrefs, 2010-04-19) fixed a similar issue for "git
push".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent commit [1] fixed a off-by-one wrapping error. As a
side-effect, the conditional in add_wrapped_shortlog_msg() to decide
whether to append a newline needs to be removed. The function
should always append a newline, which was the case before the
off-by-one fix, because strbuf_add_wrapped_text() never returns a
value of wraplen; when it returns wraplen, the string does not end
with a newline, so this caller needs to add one anyway.
[1] 14e1a4e1ff utf8: fix off-by-one
wrapping of text
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use TAB's for indentation, and wrap overlong lines.
Put the closing ' at the beginning of the line.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking and comparing the number of line in check.list and check.cvsCount
had been replaced by comparing both files line by line.
Rename the filenames to make clear which is expected and which is actual:
check.list -> list.expected
check.cvsCount-> list.actual
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "git ls-tree --name-only" which does not need a sed to filter out the sha
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing && at 2 places
Re-formated the sub-shell parantheses (coding style)
Added missing ] in the test_expect_success header at 2 places
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirection should not have SP before the filename
(i.e. ">out", not "> out").
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_end_tree():
- Instead of counting lines using wc in expectCount and cvsCount:
Sort and compare the files byte by byte with test_cmp,
which is more exact and easier to debug
- Chain all shell comands together using &&
check_end_full_tree()
- Instead of counting lines using wc in expectCount, cvsCount and gitCount:
Sort and compare the files byte by byte with test_cmp,
which is more exact and easier to debug
- Break the test using two conditions anded together with -a
into to call to test_cmp
- Chain all shell comands together using &&
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems sed allows the usage of e.g.
sed -i -e "s/line1/line2/" afile
to edit the file "in place".
Other systems don't allow that: one observed behaviour is that
sed -i -e "s/line1/line2/" afile
creates a backup file called afile-e, which breaks the test.
As sed -i is not part of POSIX, avoid it.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
Fix "git diff --stat" for interesting - but empty - file changes
When an object has already been exported (and thus is in the marks) it's
flagged as SHOWN, so it will not be exported again, even if in a later
time it's exported through a different ref.
We don't need the object to be exported again, but we want the ref
updated, which doesn't happen.
Since we can't know if a ref was exported or not, let's just assume that
if the commit was marked (flags & SHOWN), the user still wants the ref
updated.
IOW: If it's specified in the command line, it will get updated,
regardless of whether or not the object was marked.
So:
% git branch test master
% git fast-export $mark_flags master
% git fast-export $mark_flags test
Would export 'test' properly.
Additionally, this fixes issues with remote helpers; now they can push
refs whose objects have already been exported, and a few other issues as
well. Update the tests accordingly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They have been marked as UNINTERESTING for a reason, lets respect
that. Currently the first ref is handled properly, but not the
rest. Assuming that all the refs point at the same commit in the
following example:
% git fast-export master ^uninteresting ^foo ^bar
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
reset refs/heads/uninteresting
from :0
% git fast-export ^uninteresting ^foo ^bar master
reset refs/heads/master
from :0
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
Clearly this is wrong; the negative refs should be ignored.
After this patch:
% git fast-export ^uninteresting ^foo ^bar master
# nothing
% git fast-export master ^uninteresting ^foo ^bar
# nothing
And even more, it would only happen if the ref is pointing to exactly
the same commit, but not otherwise:
% git fast-export ^next next
reset refs/heads/next
from :0
% git fast-export ^next next^{commit}
# nothing
% git fast-export ^next next~0
# nothing
% git fast-export ^next next~1
# nothing
% git fast-export ^next next~2
# nothing
The reason this happens is that before traversing the commits,
fast-export checks if any of the refs point to the same object, and any
duplicated ref gets added to a list in order to issue 'reset' commands
after the traversing. Unfortunately, it's not even checking if the
commit is flagged as UNINTERESTING. The fix of course, is to check it.
However, in order to do it properly we need to get the UNINTERESTING
flag from the command line, not from the commit object, because
"^foo bar" will mark the commit 'bar' uninteresting if foo and bar
points at the same commit. rev_cmdline_info, which was introduced
exactly to handle this situation, contains all the information we
need for get_tags_and_duplicates(), plus the ref flag. This way the
rest of the positive refs will remain untouched; it's only the
negative ones that change in behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Enclose tests in single quotes as opposed to double quotes. This is
the prevalent style in other tests.
- Remove the unused variable $head4_full.
- Indent the expected output so that it lines up with the rest of the
test text.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "cd there and then come back", use the "cd there in a
subshell" pattern. Also fix '&&' chaining in one place.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list --max-count=1 HEAD` is a roundabout way of saying `git
rev-parse --verify HEAD`; replace a bunch of instances of the former
with the latter. Also, don't unnecessarily `cut -c1-7` the rev-parse
output when the `--short` option is available.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not allow fast-forwarding of references that point to a tag object.
Updating from a tag is potentially destructive since it would likely
leave the tag dangling. Disallowing updates to a tag also makes sense
semantically and is consistent with the behavior of lightweight tags.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites
Finishing touches to "git rm $submodule" that removes the working
tree of a submodule.
* jl/submodule-rm:
Teach rm to remove submodules when given with a trailing '/'
Clean up completion tests. Use of conslidated helper may make
instrumenting one particular test during debugging of the test
itself, but I think that issue should be addressed in some other
way (e.g. making sure individual tests in 9902 can be skipped).
* fc/completion-test-simplification:
completion: simplify __gitcomp() test helper
completion: refactor __gitcomp related tests
completion: consolidate test_completion*() tests
completion: simplify tests using test_completion_long()
completion: standardize final space marker in tests
completion: add comment for test_completion()
First the expected, then the actual, otherwise the diff would be the
opposite of what we want.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately a lot of these tests fail.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need a bare 'server' and an intermediary 'public'. The repos
can talk to each other directly; that's what we want to exercise.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was only to cover a bug that was fixed in remote-testpy not to
resurface.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only makes sense for the python remote helpers framework. The tests
don't exercise any feature of transport helper. Remove them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercising the python remote helper framework is for another tool and
another test. This is about testing the remote-helper interface.
It's way simpler, it exercises the same features of remote helpers, it's
easy to read and understand, and it doesn't depend on python.
For now let's just copy the old remote-helpers test script, although
some of those tests don't make sense. In addition, this script would be
able to test other features not currently being tested.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script is not really exercising the remote-helper functionality,
but more the python framework for remote helpers that live in
git_remote_helpers.
It's also not a good example of how to write remote-helpers, unless you
are planning to use python, and even then you might not want to use this
framework.
So let's use a more appropriate name: git-remote-testpy.
A patch that replaces git-remote-testgit with a simpler version is on
the way.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary thing Linus's patch wanted to change was to make sure
that 0-line change appears for a mode-only change. Update the
first test to chmod a file that we can see in the output (limited
by --stat-count) to demonstrate it. Also make sure to use test_chmod
and compare the index and the tree, so that we can run this test
even on a filesystem without permission bits.
Later two tests are about fixes to separate issues that were
introduced and/or uncovered by Linus's patch as a side effect, but
the issues are not related to mode-only changes. Remove chmod from
the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a ".git" entry inside a tree can cause confusing
results on checkout. At the top-level, you could not
checkout such a tree, as it would complain about overwriting
the real ".git" directory. In a subdirectory, you might
check it out, but performing operations in the subdirectory
would confusingly consider the in-tree ".git" directory as
the repository.
The regular git tools already make it hard to accidentally
add such an entry to a tree, and do not allow such entries
to enter the index at all. Teaching fsck about it provides
an additional safety check, and let's us avoid propagating
any such bogosity when transfer.fsckObjects is on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow send-email to use an implicitly-defined identity
for the sender (because there is still a confirmation step),
but we abort when we cannot generate such an identity. Let's
make sure that we test this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to try expanding malformed "$keyword$" that spans
across multiple lines.
* pw/maint-p4-rcs-expansion-newline:
git p4: RCS expansion should not span newlines
We do not currently have any explicit tests for "git var" at
all (though we do exercise it to some degree as a part of
other tests). Let's add a few basic sanity checks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A tree with meta-paths like '.' or '..' does not work well
with git; the index will refuse to load it or check it out
to the filesystem (and even if we did not have that safety,
it would look like we were overwriting an untracked
directory). For the same reason, it is difficult to create
such a tree with regular git.
Let's warn about these dubious entries during fsck, just in
case somebody has created a bogus tree (and this also lets
us prevent them from propagating when transfer.fsckObjects
is set).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/update-ref-d-through-symref:
Fix failure to delete a packed ref through a symref
t1400-update-ref: Add test verifying bug with symrefs in delete_ref()
Even though we show a separate *UNMERGED* entry in the patch and
diffstat output (or in the --raw format, for that matter) in
addition to and separately from the diff against the specified stage
(defaulting to #2) for unmerged paths, they should not be counted in
the total number of files affected---that would lead to counting the
same path twice.
The separation done by the previous step makes this fix simple and
straightforward. Among the filepairs in diff_queue, paths that
weren't modified, and the extra "unmerged" entries do not count as
total number of files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat generation logic, with --stat-count limit, is
implemented as three loops.
- The first counts the width necessary to show stats up to
specified number of entries, and notes up to how many entries in
the data we need to iterate to show the graph;
- The second iterates that many times to draw the graph, adjusts
the number of "total modified files", and counts the total
added/deleted lines for the part that was shown in the graph;
- The third iterates over the remainder and only does the part to
count "total added/deleted lines" and to adjust "total modified
files" without drawing anything.
Move the logic to count added/deleted lines and modified files from
the second loop to the third loop.
This incidentally fixes a bug. The third loop was not filtering
binary changes (counted in bytes) from the total added/deleted as it
should. The second loop implemented this correctly, so if a binary
change appeared earlier than the --stat-count cutoff, the code
counted number of added/deleted lines correctly, but if it appeared
beyond the cutoff, the number of lines would have mixed with the
byte count in the buggy third loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few problems in diff.c around --stat area, partially
caused by the recent 74faaa1 (Fix "git diff --stat" for interesting
- but empty - file changes, 2012-10-17), and largely caused by the
earlier change that introduced when --stat-count was added.
Add a few test pieces to t4049 to expose the issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we keep getting questions even when the user has properly
configured his full name and password:
Who should the emails appear to be from?
[Felipe Contreras <felipe.contreras@gmail.com>]
And once a question pops up, other questions are turned on. This is
annoying.
The reason it's safe to avoid this question is because currently the
script fails completely when the author (or committer) is not correct,
so we won't even be reaching this point in the code.
The scenarios, and the current situation:
1) No information at all, no fully qualified domain name
fatal: empty ident name (for <felipec@nysa.(none)>) not allowed
2) Only full name
fatal: unable to auto-detect email address (got 'felipec@nysa.(none)')
3) Full name + fqdm
Who should the emails appear to be from?
[Felipe Contreras <felipec@nysa.felipec.org>]
4) Full name + EMAIL
Who should the emails appear to be from?
[Felipe Contreras <felipe.contreras@gmail.com>]
5) User configured
6) GIT_COMMITTER
7) GIT_AUTHOR
All these are the same as 4)
After this patch:
1) 2) won't change: git send-email would still die
4) 5) 6) 7) will change: git send-email won't ask the user
This is good, that's what we would expect, because the identity is
explicit.
3) will change: git send-email won't ask the user
This is bad, because we will try with an address such as
'felipec@nysa.felipec.org', which is most likely not what the user
wants, but the user will get warned by default (confirm=auto), and if
not, most likely the sending won't work, which the user would readily
note and fix.
The worst possible scenario is that such mail address does work, and the
user sends an email from that address unintentionally, when in fact the
user expected to correct that address in the prompt. This is a very,
very, very unlikely scenario, with many dependencies:
1) No configured user.name/user.email
2) No specified $EMAIL
3) No configured sendemail.from
4) No specified --from argument
5) A fully qualified domain name
6) A full name in the geckos field
7) A sendmail configuration that allows sending from this domain name
8) confirm=never, or
8.1) confirm configuration not hitting, or
8.2) Getting the error, not being aware of it
9) The user expecting to correct this address in the prompt
In a more likely scenario where 7) is not the case (can't send from
nysa.felipec.org), the user will simply see the mail was not sent
properly, and fix the problem.
The much more likely scenario though, is where 5) is not the case
(nysa.(none)), and git send-email will fail right away like it does now.
So the likelihood of this affecting anybody seriously is very very slim,
and the chances of this affecting somebody slightly are still very
small. The vast majority, if not all, of git users won't be affected
negatively, and a lot will benefit from this.
Tests-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to import, and then export, using the same marks, so
that we don't push things that the other side already received.
Unfortunately, fast-export doesn't store blobs in the marks, but
fast-import does. This creates a mismatch when fast export is reusing a
mark that was previously stored by fast-import.
There is no point in one tool saving blobs, and the other not, but for
now let's just check in fast-export that the objects are indeed commits.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test passes already. Make sure p4 diagnostic errors are displayed.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages that arise during the "p4 print" phase of
generating commits were silently ignored. Catch them,
abort the fast-import, and exit.
Without this fix, the sync/clone appears to work, but files that
are inaccessible by the p4d server will still be imported to git,
although without the proper contents. Instead the errant files
will contain a p4 error message, such as "Librarian checkout
//depot/path failed".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the "p4 move" command was added in 8e9497c (git p4:
add support for 'p4 move' in P4Submit, 2012-07-12), which checks
to make sure that the client and server support the command.
But older versions of p4d may not handle the "-k" argument, and
newer p4d allow disabling "p4 move" with a configuration setting.
Check for both these cases by testing a p4 move command on bogus
filenames and looking for strings in the error messages.
Reported-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git diff --submodule=log" to set to be the default via
configuration.
* rr/submodule-diff-config:
submodule: display summary header in bold
diff: rename "set" variable
diff: introduce diff.submodule configuration variable
Documentation: move diff.wordRegex from config.txt to diff-config.txt
"update-ref -d --deref SYM" to delete a ref through a symbolic ref
that points to it did not remove it correctly.
* jh/update-ref-d-through-symref:
Fix failure to delete a packed ref through a symref
t1400-update-ref: Add test verifying bug with symrefs in delete_ref()
We failed to mention a file without any content change but whose
permission bit was modified, or (worse yet) a new file without any
content in the "git diff --stat" output.
* lt/diff-stat-show-0-lines:
Fix "git diff --stat" for interesting - but empty - file changes
Doing a "git rm submod/" on a submodule results in an error:
fatal: pathspec 'submod/' did not match any files
This is really inconvenient as e.g. using TAB completion in a shell on a
submodule automatically adds the trailing '/' when it completes the path
of the submodule directory. The user has then to remove the '/' herself to
make a "git rm" succeed. Doing a "git rm -r somedir/" is working fine, so
there is no reason why that shouldn't work for submodules too.
Teach git rm to not error out when a '/' is appended to the path of a
submodule. Achieve this by chopping off trailing slashes from the path
names given if they represent directories. Add tests to make sure that
logic only applies to directories and not to files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
The MSYS bash mangles arguments that begin with a forward slash
when they are passed to test-wildmatch. This causes tests to fail.
Avoid mangling by prepending "XXX", which is removed by
test-wildmatch before further processing.
[J6t: reworded commit message]
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
"git config --path $key" segfaulted on "[section] key" (a boolean
"true" spelled without "=", not "[section] key = true").
* cn/config-missing-path:
config: don't segfault when given --path with a missing value
Fixes fetch from servers that ask for auth only during the actual
packing phase. This is not really a recommended configuration, but it
cleans up the code at the same time.
* jk/maint-http-half-auth-fetch:
remote-curl: retry failed requests for auth even with gzip
remote-curl: hoist gzip buffer size to top of post_rpc
"git diff -G<pattern>" did not honor textconv filter when looking
for changes.
* jk/maint-diff-grep-textconv:
diff_grep: use textconv buffers for add/deleted files
Various rfc2047 quoting issues around a non-ASCII name on the From:
line in the output from format-patch have been corrected.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
A symbolic ref refs/heads/SYM was not correctly removed with "git
branch -d SYM"; the command removed the ref pointed by SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally.
* 'jc/grep-pcre-loose-ends' (early part):
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
The "say" function in the test scaffolding incorrectly allowed
"echo" to interpret "\a" as if it were a C-string asking for a BEL
output.
* jc/test-say-color-avoid-echo-escape:
test-lib: Fix say_color () not to interpret \a\b\c in the message
Once upon a time the builtin_diff function used one color, and the color
variables were called "set" and "reset". Nowadays it is a much longer
function and we use several colors (e.g., "add", "del"). Rename "set" to
"meta" to show that it is the color for showing diff meta-info (it still
does not indicate that it is a "color", but at least it matches the
scheme of the other color variables).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a diff.submodule configuration variable corresponding to the
'--submodule' command-line option of 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using print_comp as suggested by SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove lots of duplicated code; no functional changes intended.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to have two versions; if a second argument is specified, use
that, otherwise use stdin.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to duplicate that functionality.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the code uses ' Z$'. Lets use that for
test_completion_long() as well.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that it's easier to understand what it does.
Also, make sure we pass only the first argument for completion.
Shouldn't cause any functional changes because run_completion only
checks $1.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a variable without a value, such as '[section] var' and
asking git-config to treat it as a path, git_config_pathname returns
an error and doesn't modify its output parameter. show_config assumes
that the call is always successful and sets a variable to indicate
that vptr should be freed. In case of an error however, trying to do
this will cause the program to be killed, as it's pointing to memory
in the stack.
Detect the error and return immediately to avoid freeing or accessing
the uninitialed memory in the stack.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502 checks the behavior of commit when we can and cannot
determine a valid committer ident. Let's move that into
test-lib as a lazy prerequisite so other scripts can use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can set and test a prerequisite like this:
test_set_prereq FOO
test_have_prereq FOO && echo yes
You can negate the test in the shell like this:
! test_have_prereq && echo no
However, when you are using the automatic prerequisite
checking in test_expect_*, there is no opportunity to use
the shell negation. This patch introduces the syntax "!FOO"
to indicate that the test should only run if a prerequisite
is not meant.
One alternative is to set an explicit negative prerequisite,
like:
if system_has_foo; then
test_set_prereq FOO
else
test_set_prereq NO_FOO
fi
However, this doesn't work for lazy prerequisites, which
associate a single test with a single name. We could teach
the lazy prereq evaluator to set both forms, but the code
change ends up quite similar to this one (because we still
need to convert NO_FOO into FOO to find the correct lazy
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
Allows "cvsimport" to read per-author timezone from the author info
file.
* cr/cvsimport-local-zone:
cvsimport: work around perl tzset issue
git-cvsimport: allow author-specific timezones
Add "symbolic-ref -d SYM" to delete a symbolic ref SYM.
It is already possible to remove a symbolic ref with "update-ref -d
--no-deref", but it may be a good addition for completeness.
* jh/symbolic-ref-d:
git symbolic-ref --delete $symref
'git replace' parses the revision arguments when it creates replacements
(so that a sha1 can be abbreviated, e.g.) but not when deleting
replacements.
Make it parse the argument to 'replace -d' in the same way.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
The title of an RSS feed is generated from many components,
including the filename provided as a query parameter, but we
failed to quote it. Besides showing the wrong output, this
is a vector for XSS attacks.
Signed-off-by: Jeff King <peff@peff.net>
Cleans up some leftover bits from an earlier submodule change.
* ph/maint-submodule-status-fix:
submodule status: remove unused orig_* variables
t7407: Fix recursive submodule test
Cleanups to prepare for mo/cvs-server-updates.
* mo/cvs-server-cleanup:
Use character class for sed expression instead of \s
cvsserver status: provide real sticky info
cvsserver: cvs add: do not expand directory arguments
cvsserver: use whole CVS rev number in-process; don't strip "1." prefix
cvsserver: split up long lines in req_{status,diff,log}
cvsserver: clean up client request handler map comments
cvsserver: remove unused functions _headrev and gethistory
cvsserver update: comment about how we shouldn't remove a user-modified file
cvsserver: add comments about database schema/usage
cvsserver: removed unused sha1Or-k mode from kopts_from_path
cvsserver t9400: add basic 'cvs log' test
"git send-email --compose" can let the user create a non-ascii
cover letter message, but there was not a way to mark it with
appropriate content type before sending it out.
Further updates fix subject quoting.
* km/send-email-compose-encoding:
git-send-email: add rfc2047 quoting for "=?"
git-send-email: introduce quote_subject()
git-send-email: skip RFC2047 quoting for ASCII subjects
git-send-email: use compose-encoding for Subject
git-send-email: introduce compose-encoding
Fixes many rfc2047 quoting issues in the output from format-patch.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
Start laying the foundation to build the "wildmatch" after we can
agree on its desired semantics.
* nd/attr-match-optim-more:
attr: more matching optimizations from .gitignore
gitignore: make pattern parsing code a separate function
exclude: split pathname matching code into a separate function
exclude: fix a bug in prefix compare optimization
exclude: split basename matching code into a separate function
exclude: stricten a length check in EXC_FLAG_ENDSWITH case
This bug was introduced in cb585a9 (git-p4: keyword
flattening fixes, 2011-10-16). The newline character
is indeed special, and $File$ expansions should not try
to match across multiple lines.
Based-on-patch-by: Chris Goard <cgoard@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jeff King <peff@peff.net>
No reason to use the full path in case this is used externally.
Otherwise we might get errors such as:
./test-lib.sh: line 394: /home/bob/dev/git/t/test-results//home/bob/dev/git/contrib/remote-hg/test-2894.counts: No such file or directory
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Commit b81401c taught the post_rpc function to retry the
http request after prompting for credentials. However, it
did not handle two cases:
1. If we have a large request, we do not retry. That's OK,
since we would have sent a probe (with retry) already.
2. If we are gzipping the request, we do not retry. That
was considered OK, because the intended use was for
push (e.g., listing refs is OK, but actually pushing
objects is not), and we never gzip on push.
This patch teaches post_rpc to retry even a gzipped request.
This has two advantages:
1. It is possible to configure a "half-auth" state for
fetching, where the set of refs and their sha1s are
advertised, but one cannot actually fetch objects.
This is not a recommended configuration, as it leaks
some information about what is in the repository (e.g.,
an attacker can try brute-forcing possible content in
your repository and checking whether it matches your
branch sha1). However, it can be slightly more
convenient, since a no-op fetch will not require a
password at all.
2. It future-proofs us should we decide to ever gzip more
requests.
Signed-off-by: Jeff King <peff@peff.net>
A symbolic ref refs/heads/SYM was not correctly removed with
"git branch -d SYM"; the command removed the ref pointed by
SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally. The early part of this series is a fix for it;
the latter part teaches log to respect the grep.* configuration.
* jc/grep-pcre-loose-ends:
log: honor grep.* configuration
log --grep: accept --basic-regexp and --perl-regexp
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
If you remove a submodule, in order to keep the repository so that
"git checkout" to an older commit in the superproject history can
resurrect the submodule, the real repository will stay in $GIT_DIR
of the superproject. A later "git submodule add $path" to add a
different submodule at the same path will fail. Diagnose this case
a bit better, and if the user really wants to add an unrelated
submodule at the same path, give the "--name" option to give it a
place in $GIT_DIR of the superproject that does not conflict with
the original submodule.
* jl/submodule-add-by-name:
submodule add: Fail when .git/modules/<name> already exists unless forced
Teach "git submodule add" the --name option
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
'feature done' was missing, which allowed fast-import exit properly, and
transport-helper to continue checking for refs and what not when in fact
the remote-helper died.
Let's enable that, and make sure the error paths are triggered.
Now transport-helper correctly detects the errors from fast-import,
unfortunately, not from fast-export because it might finish before
detecting a SIGPIPE. This means transport-helper will quit silently and
the user will not see any errors, which is bad. Hopefully the helper
will print the error before dying anyway, so not all is lost.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A test in t7404-submodule-foreach purports to test that
the --cached flag is properly noticed by --recursive calls
to the foreach command as it descends into nested
submodules. However, the test really does not perform this
test since the change it looks for is in a top-level
submodule handled by the first invocation of the command.
To properly test for the flag being passed to recursive
invocations, the change must be buried deeper in the
hierarchy.
Move the change one level deeper so it properly verifies
the recursive machinery of the 'git submodule status'
command.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Jeff King <peff@peff.net>
This function was added in f103f95b11 in
the erroneous expectation that it would be used in the
reimplementation of longest_ancestor_length(). But it turned out to
be easier to use a function specialized for comparing path prefixes
(i.e., one that knows about slashes and root paths) than to prepare
the paths in such a way that a generic string prefix comparison
function can be used. So delete string_list_longest_prefix() and its
documentation and test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
We currently just look at raw blob data when using "-S" to
pickaxe. This is mostly historical, as pickaxe predates the
textconv feature. If the user has bothered to define a
textconv filter, it is more likely that their search string will be
on the textconv output, as that is what they will see in the
diff (and we do not even provide a mechanism for them to
search for binary needles that contain NUL characters).
This patch teaches "-S" to use textconv, just as we
already do for "-G".
Signed-off-by: Jeff King <peff@peff.net>
If you use "-G" to grep a diff, we will apply a configured
textconv filter to the data before generating the diff.
However, if the diff is an addition or deletion, we do not
bother running the diff at all, and just look for the token
in the added (or removed) content. This works because we
know that the diff must contain every line of content.
However, while we used the textconv-derived buffers in the
regular diff, we accidentally passed the original unmodified
buffers to regexec when checking the added or removed
content. This could lead to an incorrect answer.
Worse, in some cases we might have a textconv buffer but no
original buffer (e.g., if we pulled the textconv data from
cache, or if we reused a working tree file when generating
it). In that case, we could actually feed NULL to regexec
and segfault.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
t9200 defines $CVSROOT where cvs should init its repository
$CVSROOT is set to $PWD/cvsroot.
cvs init is supposed to create the repository inside $PWD/cvsroot/CVSROOT
"cvs init" (e.g. version 1.11.23) checks if the last element of the path is
"CVSROOT", and if a directory with e.g. $PWD/cvsroot/CVSROOT already exists.
For such a $CVSROOT cvs refuses to init a repository here:
"Cannot initialize repository under existing CVSROOT:
On a case insenstive file system cvsroot and CVSROOT are the same directories
and t9200 fails.
Solution: use $PWD/tmpcvsroot instead of cvsroot $PWD/cvsroot
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Sed on Mac OS X doesn't handle \s in a sed expressions so use a more
portable character set expression instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Recent nd/wildmatch series was the first to reveal this ancient bug
in the test scaffolding.
* jc/test-say-color-avoid-echo-escape:
test-lib: Fix say_color () not to interpret \a\b\c in the message
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
Teaches a new configuration variable to "git diff" Porcelain and
its friends.
* jm/diff-context-config:
t4055: avoid use of sed 'a' command
diff: diff.context configuration gives default to -U
The git-send-email always use RFC2047 subject quoting for
files with "broken" encoding - non-ASCII files without
Content-Transfer-Encoding, even for ASCII subjects. This is
harmless but unnecessarily ugly for people reading the raw
headers. This patch skips rfc2047 quoting when the subject
does not need it.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The commit "git-send-email: introduce compose-encoding" introduced
the compose-encoding option to specify the introduction email encoding
(--compose option), but the email Subject encoding was still hardcoded
to UTF-8.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
If git-config is asked for a single value, it will complain
and exit with an error if it finds multiple instances of
that value. This is unlike the usual internal config
parsing, however, which will generally overwrite previous
values, leaving only the final one. For example:
[set a multivar]
$ git config user.email one@example.com
$ git config --add user.email two@example.com
[use the internal parser to fetch it]
$ git var GIT_AUTHOR_IDENT
Your Name <two@example.com> ...
[use git-config to fetch it]
$ git config user.email
one@example.com
error: More than one value for the key user.email: two@example.com
This overwriting behavior is critical for the regular
parser, which starts with the lowest-priority file (e.g.,
/etc/gitconfig) and proceeds to the highest-priority file
($GIT_DIR/config). Overwriting yields the highest priority
value at the end.
Git-config solves this problem by implementing its own
parsing. It goes from highest to lowest priorty, but does
not proceed to the next file if it has seen a value.
So in practice, this distinction never mattered much,
because it only triggered for values in the same file. And
there was not much point in doing that; the real value is in
overwriting values from lower-priority files.
However, this changed with the implementation of config
include files. Now we might see an include overriding a
value from the parent file, which is a sensible thing to do,
but git-config will flag as a duplication.
This patch drops the duplicate detection for git-config and
switches to a pure-overwrite model (for the single case;
--get-all can still be used if callers want to do something
more fancy).
As is shown by the modifications to the test suite, this is
a user-visible change in behavior. An alternative would be
to just change the include case, but this is much cleaner
for a few reasons:
1. If you change the include case, then to what? If you
just stop parsing includes after getting a value, then
you will get a _different_ answer than the regular
config parser (you'll get the first value instead of
the last value). So you'd want to implement overwrite
semantics anyway.
2. Even though it is a change in behavior for git-config,
it is bringing us in line with what the internal
parsers already do.
3. The file-order reimplementation is the only thing
keeping us from sharing more code with the internal
config parser, which will help keep differences to a
minimum.
Going under the assumption that the primary purpose of
git-config is to behave identically to how git's internal
parsing works, this change can be seen as a bug-fix.
Signed-off-by: Jeff King <peff@peff.net>
We check that we can "--get-all" a multi-valued variable,
but we do not actually confirm that the output is sensible.
Doing so reveals that it works fine, but this will help us
ensure we do not have regressions in the next few patches,
which will touch this area.
Signed-off-by: Jeff King <peff@peff.net>
This test checks that git-config fails for an ambiguous
"get", but we check the exact same thing 3 tests beforehand.
Signed-off-by: Jeff King <peff@peff.net>
The t1300 test script is quite old, and does not use our
modern techniques or styles. This patch updates it in the
following ways:
1. Use test_cmp instead of cmp (to make failures easier to
debug).
2. Use test_cmp instead of 'test $(command) = expected'.
This makes failures much easier to debug, and also
makes sure that $(command) exits appropriately.
3. Use test_must_fail (easier to read, and checks more
rigorously for signal death).
4. Write tests with the usual style of:
test_expect_success 'test name' '
test commands &&
...
'
rather than one-liners, or using backslash-continuation.
This is purely a style fixup.
There are still a few command happening outside of
test_expect invocations, but they are all innoccuous system
commands like "cat" and "cp". In an ideal world, each test
would be self sufficient and all commands would happen
inside test_expect, but it is not immediately obvious how
the grouping should work (some of the commands impact the
subsequent tests, and some of them are setting up and
modifying state that many tests depend on). This patch just
picks the low-hanging style fruit, and we can do more fixes
on top later.
Signed-off-by: Jeff King <peff@peff.net>
Teach symbolic-ref to delete symrefs by adding the -d/--delete option to
git-symbolic-ref. Both proper and dangling symrefs are deleted by this
option, but other refs - or anything else that is not a symref - is not.
The symref deletion is performed by first verifying that we are given a
proper symref, and then invoking delete_ref() on it with the REF_NODEREF
flag.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting a ref through a symref (e.g. using 'git update-ref -d HEAD'
to delete refs/heads/master), we would remove the loose ref, but a packed
version of the same ref would remain, the end result being that instead of
deleting refs/heads/master we would appear to reset it to its state as of
the last repack.
This patch fixes the issue, by making sure we pass the correct ref name
when invoking repack_without_ref() from within delete_ref().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting a ref through a symref (e.g. using 'git update-ref -d HEAD'
to delete refs/heads/master), we currently fail to remove the packed
version of that ref. This testcase demonstrates the bug.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us some code, but it also reduces the number of
processes we start for each filtered commit. Since we can
parse both author and committer in the same sed invocation,
we save one process. And since the new interface avoids tr,
we save 4 processes.
It also avoids using "tr", which has had some odd
portability problems reported with from Solaris's xpg6
version.
We also tweak one of the tests in t7003 to double-check that
we are properly exporting the variables (because test-lib.sh
exports GIT_AUTHOR_NAME, it will be automatically exported
in subprograms. We override this to make sure that
filter-branch handles it properly itself).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch reports the abbreviated hash of the head commit of
a deleted branch to make it easier for a user to undo the
operation. For symref branches this doesn't help. Print the
symref target instead for them.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a branch is deleted, we check that it points to a valid
commit. With -d we also check that the commit is a merged; this
check is not done with -D.
The reason for that is that commits pointed to by branches should
never go missing; if they do then something broke and it's better
to stop instead of adding to the mess. And a non-merged commit
may contain changes that are worth preserving, so we require the
stronger option -D instead of -d to get rid of them.
If a branch consists of a symref, these concerns don't apply.
Deleting such a branch can't make a commit become unreferenced,
so we don't need to check if it is merged, or even if it is
actually a valid commit. Skip them in that case. This allows
us to delete dangling symref branches.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch that is to be deleted happens to be a symref to another
branch, the current code removes the targeted branch instead of the
one it was called for.
Change this surprising behaviour and delete the symref branch
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-format-patch does currently not parse user supplied extra header
values (e. g., --cc, --add-header) and just replays them. That forces
users to add them RFC 2822/2047 conform in encoded form, e.g.
--cc '=?UTF-8?q?Jan=20H=2E=20Sch=C3=B6nherr?= <...>'
which is inconvenient. We would want to update git-format-patch to
accept human-readable input
--cc 'Jan H. Schönherr <...>'
and handle the encoding, wrapping and quoting internally in the future,
similar to what is already done in git-send-email. The necessary code
should mostly exist in the code paths that handle the From: and Subject:
headers.
Whether we want to do this only for the git-format-patch options
--to and --cc (and the corresponding config options) or also for
user supplied headers via --add-header, is open for discussion.
For now, add test_expect_failure tests for To: and Cc: headers as a
reminder and fix tests that would otherwise fail should this get
implemented.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC 2047 and RFC 822, rfc2047 encoded words and and rfc822
quoted strings do not mix. Since add_rfc2047() no longer leaves RFC 822
specials behind, the quoting is also no longer necessary to create a
standard-conforming mail.
Remove the quoting, when RFC 2047 encoding takes place. This actually
requires to refactor add_rfc2047() a bit, so that the different cases
can be distinguished.
With this patch, my own name gets correctly decoded as Jan H. Schönherr
(without quotes) and not as "Jan H. Schönherr" (with quotes).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2047 requires more characters to be encoded than it is currently done.
Especially, RFC 2047 distinguishes between allowed remaining characters
in encoded words in addresses (From, To, etc.) and other headers, such
as Subject.
Make add_rfc2047() and is_rfc2047_special() location dependent and include
all non-allowed characters to hopefully be RFC 2047 conformant.
This especially fixes a problem, where RFC 822 specials (e. g. ".") were
left unencoded in addresses, which was solved with a non-standard-conforming
workaround in the past (which is going to be removed in a follow-up patch).
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encoded characters add more than one character at once to an encoded
header. Include all characters that are about to be added in the length
calculation for wrapping.
Additionally, RFC 2047 imposes a maximum line length of 76 characters
if that line contains an rfc2047 encoded word.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not wrap the second and later lines of non-rfc2047-encoded headers
substantially before the 78 character limit.
Instead of passing the remaining length of the first line as wrapping
width, use the correct maximum length and tell strbuf_add_wrapped_bytes()
how many characters of the first line are already used.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wrapping logic in strbuf_add_wrapped_text() does currently not allow
lines that entirely fill the allowed width, instead it wraps the line one
character too early.
For example, the text "This is the sixth commit." formatted via
"%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char
indent of following lines) results in four lines: " This is", " the",
" sixth", " commit." This is wrong, because " the sixth" is exactly
11 characters long, and thus allowed.
Fix this by allowing the (width+1) character of a line to be a valid
wrapping point if it is a whitespace character.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When inserting the note after the commit log message to format-patch
output, add three dashes before the note. Record the fact that we
did so in the rev_info and omit showing duplicated three dashes in
the usual codepath that is used when notes are not being shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When appending a new signature with "format-patch --signature", if
the "--notes" option is also in effect, the location of the new
signature (and if the signature should be added in the first place)
should be decided using the contents of the original commit log
message, before the message from the notes is added.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of "git diff --stat" is rather odd for files that have
zero lines of changes: it will discount them entirely unless they were
renames.
Which means that the stat output will simply not show files that only
had "other" changes: they were created or deleted, or their mode was
changed.
Now, those changes do show up in the summary, but so do renames, so
the diffstat logic is inconsistent. Why does it show renames with zero
lines changed, but not mode changes or added files with zero lines
changed?
So change the logic to not check for "is_renamed", but for
"is_interesting" instead, where "interesting" is judged to be any
action but a pure data change (because a pure data change with zero
data changed really isn't worth showing, if we ever get one in our
diffpairs).
So if you did
chmod +x Makefile
git diff --stat
before, it would show empty (" 0 files changed"), with this it shows
Makefile | 0
1 file changed, 0 insertions(+), 0 deletions(-)
which I think is a more correct diffstat (and then with "--summary" it
shows *what* the metadata change to Makefile was - this is completely
consistent with our handling of renamed files).
Side note: the old behavior was *really* odd. With no changes at all,
"git diff --stat" output was empty. With just a chmod, it said "0
files changed". No way is our legacy behavior sane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
CVS patchsets are imported with timestamps having an offset of +0000
(UTC). The cvs-authors file is already used to translate the CVS
username to full name and email in the corresponding commit. Extend
this file to support an optional timezone for calculating a user-
specific timestamp offset.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of the whole CVS revision number in-process. This will
clarify code when we start handling non-linear revision numbers later.
There is one externally visible change: conflict markers after
an update will now include the full CVS revision number,
including the "1." prefix. It used to leave off the prefix.
Other than the conflict marker, this change doesn't effect
external functionality. No new features, and the DB schema
is unchanged such that it continues to store just
the stripped rev numbers (without prefix).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cvs log' output is arguably deficient in a number of ways
(see the comment added with the test), but add a test for
the current output to detect for accidental regressions.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"foo/**/bar" matches "foo/x/bar", "foo/x/y/bar"... but not
"foo/bar". We make a special case, when foo/**/ is detected (and
"foo/" part is already matched), try matching "bar" with the rest of
the string.
"Match one or more directories" semantics can be easily achieved using
"foo/*/**/bar".
This also makes "**/foo" match "foo" in addition to "x/foo",
"x/y/foo"..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Standard wildmatch() sees consecutive asterisks as "*" that can also
match slashes. But that may be hard to explain to users as
"abc/**/def" can match "abcdef", "abcxyzdef", "abc/def", "abc/x/def",
"abc/x/y/def"...
This patch changes wildmatch so that users can do
- "**/def" -> all paths ending with file/directory 'def'
- "abc/**" - equivalent to "/abc/"
- "abc/**/def" -> "abc/x/def", "abc/x/y/def"...
- otherwise consider the pattern malformed if "**" is found
Basically the magic of "**" only remains if it's wrapped around by
slashes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests show different results on different fnmatch() versions. We
don't want to test fnmatch here. We want to make sure wildmatch
behavior matches fnmatch and that only makes sense in cases when
fnmatch() behaves consistently.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files are from rsync.git commit
f92f5b166e3019db42bc7fe1aa2f1a9178cd215d, which was the last commit
before rsync turned GPL-3. All files are imported as-is and
no-op. Adaptation is done in a separate patch.
rsync.git -> git.git
lib/wildmatch.[ch] wildmatch.[ch]
wildtest.txt t/t3070/wildtest.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.
Don't be too optimistic and let fnmatch() do the job.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running with color disabled (e.g. under prove to produce TAP
output), say_color() helper function is defined to use echo to show
the message. With a message that ends with "\c", echo is allowed to
interpret it as "Do not end the line with LF".
Use printf "%s\n" to emit the message literally.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test script uses "svn cp" to create a branch with an @-sign in
its name:
svn cp "pr ject/trunk" "pr ject/branches/not-a@{0}reflog"
That sets up for later tests that fetch the branch and check that git
svn mangles the refname appropriately.
Unfortunately, modern svn versions interpret path arguments with an
@-sign as an example of path@revision syntax (which pegs a path to a
particular revision) and truncate the path or error out with message
"svn: E205000: Syntax error parsing peg revision '{0}reflog'".
When using subversion 1.6.x, escaping the @ sign as %40 avoids trouble
(see 08fd28bb, 2010-07-08). Newer versions are stricter:
$ svn cp "$repo/pr ject/trunk" "$repo/pr ject/branches/not-a%40{reflog}"
svn: E205000: Syntax error parsing peg revision '%7B0%7Dreflog'
The recommended method for escaping a literal @ sign in a path passed
to subversion is to add an empty peg revision at the end of the path
("branches/not-a@{0}reflog@"). Do that.
Pre-1.6.12 versions of Subversion probably treat the trailing @ as
another literal @-sign (svn issue 3651). Luckily ever since
v1.8.0-rc0~155^2~7 (t9118: workaround inconsistency between SVN
versions, 2012-07-28) the test can survive that.
Tested with Debian Subversion 1.6.12dfsg-6 and 1.7.5-1 and r1395837
of Subversion trunk (1.8.x).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The introduction email (--compose option) have encoding hardcoded to
UTF-8, but invoked editor may not use UTF-8 encoding.
The encoding used by patches can be changed by the "8bit-encoding"
option, but this option does not have effect on introduction email
and equivalent for introduction email is missing.
Added compose-encoding command line option and sendemail.composeencoding
configuration option specify encoding of introduction email.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parser for "git log -F -E --grep='<ere>'"
did not flip the "fixed" bit, violating the general "last option
wins" principle among conflicting options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests just want a bit-for-bit identical copy; they do not need
even -H (there is no symbolic link involved) nor -p (there is no
funny permission or ownership issues involved).
Just use "cp -R" instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsck test assumed too much on what kind of error it will
detect. The only important thing is the inconsistency is detected
as an error.
* jc/maint-t1450-fsck-order-fix:
t1450: the order the objects are checked is undefined
"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Use svnrdump_sim.py to emulate svnrdump without an svn server.
Tests fetching, incremental fetching, fetching from file://,
and the regeneration of fast-import's marks file.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the {word,[...]} style of configuration for tags and branches,
it appears the intent is to only match whole path parts, since the words
in the {} pattern are meta-character quoted.
When the pattern word appears in the beginning or middle of the url,
it's matched completely, since the left side, pattern, and (non-empty)
right side are joined together with path separators.
However, when the pattern word appears at the end of the URL, the
right side is an empty pattern, and the resulting regex matches
more than just the specified pattern.
For example, if you specify something along the lines of
branches = branches/project/{release_1,release_2}
and your repository also contains "branches/project/release_1_2", you
will also get the release_1_2 branch. By restricting the match regex
with anchors, this is avoided.
Signed-off-by: Ammon Riley <ammon.riley@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This fixes `ambiguous redirect' error given by bash.
[ew: fix misspelled test name,
also eliminate space after ">>" to conform to guidelines]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This fixes a bug where git finds the incorrect merge parent. Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Reviewed-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Consider the case where you have trunk, branch1 of trunk, and branch2 of
branch1. trunk is merged back into branch2, and then branch2 is
reintegrated into trunk. The merge of branch2 into trunk will have
svn:mergeinfo property references to both branch1 and branch2. When
git-svn fetches the commit that merges branch2 (check_cherry_pick),
it is necessary to eliminate the merged contents of branch1 as well as
branch2, or else the merge will be incorrectly ignored as a cherry-pick.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Reviewed-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Teach the commands from the "log" family the "--grep-reflog" option
to limit output by string that appears in the reflog entry when the
"--walk-reflogs" option is in effect.
* nd/grep-reflog:
revision: make --grep search in notes too if shown
log --grep-reflog: reject the option without -g
revision: add --grep-reflog to filter commits by reflog messages
grep: prepare for new header field filter
"gc --auto" notified the user that auto-packing has triggered even
under the "--quiet" option.
* tu/gc-auto-quiet:
silence git gc --auto --quiet output
When a tag T points at an object X that is of a type that is
different from what the tag records as, fsck should report it as an
error.
However, depending on the order X and T are checked individually,
the actual error message can be different. If X is checked first,
fsck remembers X's type and then when it checks T, it notices that T
records X as a wrong type (i.e. the complaint is about a broken tag
T). If T is checked first, on the other hand, fsck remembers that we
need to verify X is of the type tag records, and when it later
checks X, it notices that X is of a wrong type (i.e. the complaint
is about a broken object X).
The important thing is that fsck notices such an error and diagnoses
the issue on object X, but the test was expecting that we happen to
check objects in the order to make us detect issues with tag T, not
with object X. Remove this unwarranted assumption.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".
* rr/maint-submodule-unknown-cmd:
submodule: if $command was not matched, don't parse other args
"git fetch" over http advertised that it supports "deflate", which
is much less common, and did not advertise more common "gzip" on its
Accept-Encoding header.
* sp/maint-http-enable-gzip:
Enable info/refs gzip decompression in HTTP client
The 'a', 'i' and 'c' commands take a literal text to be added
followed by backslash, but then in the source we cannot indent
the literal text which makes it ugly.
We need to also remember to double the backslash inside double
quotes.
Avoid these issues altogether by having an extra line in a template
file and generate test vectors by deleting the line or replacing the
line and not using the 'a' command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The actual external command to run for mergetool backend can be
specified with difftool/mergetool.$name.cmd configuration
variables, but this mechanism was ignored for the backends we
natively support.
* da/mergetool-custom:
mergetool--lib: Allow custom commands to override built-ins
Send errors from "unpack-objects" and "index-pack" back to the "git
push" over the git and smart-http protocols, just like it is done
for a push over the ssh protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
Running "git fetch" in a repository made with "git clone --single"
slurps all the branches, defeating the point of "--single".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Introduce a configuration variable diff.context that tells
Porcelain commands to use a non-default number of context
lines instead of 3 (the default). With this variable, users
do not have to keep repeating "git log -U8" from the command
line; instead, it becomes sufficient to say "git config
diff.context 8" just once.
Signed-off-by: Jeff Muizelaar <jmuizelaar@mozilla.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new submodule it can happen that .git/modules/<name> already
contains a submodule repo, e.g. when a submodule is removed from the work
tree and another submodule is added at the same path. But then the work
tree of the submodule will be populated using the existing repository and
not the one the user provided, which results in an incorrect work tree. On
the other hand the user might reactivate a submodule removed earlier, then
reusing that .git directory is the Right Thing to do.
As git can't decide what is the case, error out and tell the user she
should use either use a different name for the submodule with the "--name"
option or can reuse the .git directory for the newly added submodule by
providing the --force option (which only makes sense when the upstream
matches, so the error message lists all remotes of .git/modules/<name>).
In one test in t7406 the --force option had to be added to "git submodule
add", as that test re-adds a formerly removed submodule.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Allows users to turn off smart-http when talking to dumb-only
servers.
* jk/smart-http-switch:
remote-curl: let users turn off smart http
remote-curl: rename is_http variable
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
"git submodule add" initializes the name of a submodule to its path. This
was ok as long as the .git directory lived inside the submodule's work
tree, but since 1.7.8 it is stored in the .git/modules/<name> directory of
the superproject, making the submodule name survive the removal of the
submodule's work tree. This leads to problems when the user tries to add a
different submodule at the same path - and thus the same name - later, as
that will happily try to restore the submodule from the old repository
instead of the one the user specified and will lead to a checkout of the
wrong repository.
Add the new "--name" option to let the user provide a name for the
submodule. This enables the user to solve this conflict without having to
remove .git/modules/<name> by hand (which is no viable solution as it
makes it impossible to checkout a commit that records the old submodule
and populate it, as that will still check out the new submodule for the
same reason).
To achieve that the submodule's name is added to the parameter list of
the module_clone() helper function. This makes it possible to remove the
call of module_name() there because both callers of module_clone() already
know the name and can provide it as argument number two.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep supports only author and committer headers, which have the same
special treatment that later headers may or may not have. Check for
field type and only strip_timestamp() when the field is either author
or committer.
GREP_HEADER_FIELD_MAX is put in the grep_header_field enum to be
calculated automatically, correctly, as long as it's at the end of the
enum.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is requested, gc --auto should not display messages unless
there is an error.
Signed-off-by: Tobias Ulmer <tobiasu@tmux.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We correctly handle completion items with spaces just fine,
since we pass the lists around with newline delimiters.
However, we do not handle filenames with shell
metacharacters, as "compgen -W" performs expansion on the
list we give it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing ref or tree completion at all. Let's
give them even basic sanity checks to avoid regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The malloc checks in tests are currently disabled. Actually evaluate
the variable for turning them off and enable them if it's unset.
Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" command DWIMs the command line and assumes a
unspecified action word for 'status' action. This is a UI mistake
that leads to a confusing behaviour. A mistyped command name is
instead treated as a request for 'status' of the submodule with that
name, e.g.
$ git submodule show
error: pathspec 'show' did not match any file(s) known to git.
Did you forget to 'git add'?
Stop DWIMming an unknown or mistyped subcommand name as pathspec
given to unspelled "status" subcommand. "git submodule" without any
argument is still interpreted as "git submodule status", but its
value is questionable.
Adjust t7400 to match, and stop advertising the default subcommand
being 'status' which does not help much in practice, other than
promoting laziness and confusion.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first test t0000 in the test suite made sure we have built
Git to be tested; move the check to test-lib so that it applies to
all tests equally.
* rr/test-make-sure-we-have-git:
t/test-lib: make sure Git has already been built
Run our test scripts with MALLOC_CHECK_ and MALLOC_PERTURB_, the
built-in memory access checking facility GNU libc has.
* ep/malloc-check-perturb:
MALLOC_CHECK: various clean-ups
Add MALLOC_CHECK_ and MALLOC_PERTURB_ libc env to the test suite for detecting heap corruption
When "git am" is fed an input that has multiple "Content-type: ..."
header, it did not grok charset= attribute correctly.
* jc/maint-mailinfo-mime-attr:
mailinfo: do not concatenate charset= attribute values from mime headers
The codepath for handling "--tee" ends up relaunching the test
script under a shell, and that one has to be a Bourne. But we
incorrectly used $SHELL, which could be a non-Bourne (e.g. zsh or
csh); we have the Makefile variable $SHELL_PATH for exactly that,
so use it instead.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to override the default commands provided by the
mergetools/* scriptlets.
Users occasionally run into problems where they expect to be
able to override the built-in tool names. The documentation
does not explicitly mention that built-ins cannot be overridden,
so it's easy to assume that it should work.
Lift this restriction so that built-in tools are handled the
same way as user-configured tools. Add tests to guarantee this
behavior.
A nice benefit of this change is that it protects users from
having future versions of git trump their custom configuration
with a new built-in tool.
C.f.:
http://stackoverflow.com/questions/7435002/mergetool-from-gitconfig-being-ignoredhttp://thread.gmane.org/gmane.comp.version-control.msysgit/13188http://thread.gmane.org/gmane.comp.version-control.git/148267
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
This incidentally fixes an unrelated problem on a case insensitive
filesystem, where "git blame MAKEFILE" run in a history that has
"Makefile" but not "MAKEFILE" did not say "No such file MAKEFILE in
HEAD" but pretended as if "MAKEFILE" was a newly added file.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Usually there is no need for users to specify whether an
http remote is smart or dumb; the protocol is designed so
that a single initial request is made, and the client can
determine the server's capability from the response.
However, some misconfigured dumb-only servers may not like
the initial request by a smart client, as it contains a
query string. Until recently, commit 703e6e7 worked around
this by making a second request. However, that commit was
recently reverted due to its side effect of masking the
initial request's error code.
Since git has had that workaround for several years, we
don't know exactly how many such misconfigured servers are
out there. The reversion of 703e6e7 assumes they are rare
enough not to worry about. Still, that reversion leaves
somebody who does run into such a server with no escape
hatch at all. Let's give them an environment variable they
can tweak to perform the "dumb" request.
This is intentionally not a documented interface. It's
overly simple and is really there for debugging in case
somebody does complain about git not working with their
server. A real user-facing interface would entail a
per-remote or per-URL config variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some HTTP servers try to use gzip compression on the /info/refs
request to save transfer bandwidth. Repositories with many tags
may find the /info/refs request can be gzipped to be 50% of the
original size due to the few but often repeated bytes used (hex
SHA-1 and commonly digits in tag names).
For most HTTP requests enable "Accept-Encoding: gzip" ensuring
the /info/refs payload can use this encoding format.
Only request gzip encoding from servers. Although deflate is
supported by libcurl, most servers have standardized on gzip
encoding for compression as that is what most browsers support.
Asking for deflate increases request sizes by a few bytes, but is
unlikely to ever be used by a server.
Disable the Accept-Encoding header on probe RPCs as response bodies
are supposed to be exactly 4 bytes long, "0000". The HTTP headers
requesting and indicating compression use more space than the data
transferred in the body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Add '--conflict' option to git-p4 subcommand to specify what action
to take when conflicts are found during 'p4 submit'.
* pw/p4-submit-conflicts:
git-p4: add submit --conflict option and config varaiable
git p4: add submit --prepare-p4-only option
git p4: add submit --dry-run option
git p4: accept -v for --verbose
git p4: revert deleted files after submit cancel
git p4: rearrange submit template construction
git p4: test clean-up after failed submit, fix added files
git p4: standardize submit cancel due to unchanged template
git p4: move conflict prompt into run, add [q]uit input
git p4: remove submit failure options [a]pply and [w]rite
git p4: gracefully fail if some commits could not be applied
git p4 test: remove bash-ism of combined export/assignment
After "git cherry-pick -s" gave control back to the user asking
help to resolve conflicts, concluding "git commit" needs to be run
with "-s" if the user wants to sign it off, but the command should
be able to remember that.
* mv/cherry-pick-s:
cherry-pick: don't forget -s on failure
When tests were run without building git, they stopped with:
.: 54: Can't open /path/to/git/source/t/../GIT-BUILD-OPTIONS
Move the check that makes sure that git has already been built from
t0000 to test-lib, so that any test will do so before it runs.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the todo sheet of interactive rebase instructs to run a non-existing
command, the operation stops with the following error:
Execution failed: no-such
You can fix the problem, and then run
git rebase --continue
fatal: 'rebase' appears to be a git command, but we were not
able to execute it. Maybe git-rebase is broken?
The reason is that the shell that attempted to run the command exits with
code 127. rebase--interactive just forwards this code to the caller (the
git wrapper). But our smart run-command infrastructure detects this
special exit code and turns it into ENOENT, which in turn is interpreted
by the git wrapper as if the external command that it just executed did
not exist. This is finally translated to the misleading last two lines in
error message cited above.
Fix it by translating the error code before it is forwarded.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important in this change is to avoid affecting anything
when test-lib is used from perf-lib. It also limits the effect of
the MALLOC_CHECK only to what is run inside the actual test, and
uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability
of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Code simplification and clarification.
* mh/fetch-filter-refs:
test-string-list.c: Fix some sparse warnings
fetch-pack: eliminate spurious error messages
cmd_fetch_pack(): simplify computation of return value
fetch-pack: report missing refs even if no existing refs were received
cmd_fetch_pack(): return early if finish_connect() fails
filter_refs(): simplify logic
filter_refs(): build refs list as we go
filter_refs(): delete matched refs from sought list
fetch_pack(): update sought->nr to reflect number of unique entries
filter_refs(): do not check the same sought_pos twice
Change fetch_pack() and friends to take string_list arguments
fetch_pack(): reindent function decl and defn
Rename static function fetch_pack() to http_fetch_pack()
t5500: add tests of fetch-pack --all --depth=N $URL $REF
t5500: add tests of error output for missing refs
* mh/string-list:
api-string-list.txt: initialize the string_list the easy way
string_list: add a function string_list_longest_prefix()
string_list: add a new function, string_list_remove_duplicates()
string_list: add a new function, filter_string_list()
string_list: add two new functions for splitting strings
string_list: add function string_list_append_nodup()
"git blame MAKEFILE" run in a history that has "Makefile" but not
"MAKEFILE" should say "No such file MAKEFILE in HEAD", but got
confused on a case insensitive filesystem and failed to do so.
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"Content-type: text/plain; charset=UTF-8" header should not appear
twice in the input, but it is always better to gracefully deal with
such a case. The current code concatenates the value to the values
we have seen previously, producing nonsense such as "utf8UTF-8".
Instead of concatenating, forget the previous value and use the last
value we see.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Ada xfuncname and wordRegex patterns to the list of builtin
patterns.
Signed-off-by: Adrian Johnson <ajohnson@redneon.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows specifying what to do when a conflict
happens when applying a commit to p4, automating the
interactive prompt.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option can be used to prepare the client workspace for
submission, only. It does not invoke the final "p4 submit".
A message describes how to proceed, either submitting the
changes or reverting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option, "git p4 submit --dry-run" can be used to verify
what commits and labels would be moved into p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can decide not to continue with a submission,
by not saving the p4 submit template, then answering "no" to
the "Submit anyway?" prompt. In this case, be sure to
return the p4 client to its initial state.
Deleted files were not reverted; fix this and test all cases.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test a variety of cases where a patch failed to apply to
p4 and had to be cleaned up.
If the patch failed to apply cleanly, do not try to remove
to-be-added files, as they have not really been added yet.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When editing the submit template, if no change was made to it,
git p4 offers a prompt "Submit anyway?". Answering "no" cancels
the submit.
Previously, a "no" answer behaves like a "[s]kip" answer to the
failed-patch prompt, in that it proceeded to try to apply the
rest of the commits. Instead, put users back into the new
"[s]kip / [c]ontinue" loop so that they can decide. This makes
both cases of patch failure behave identically.
The return code of git p4 after a "no" answer is now the same
as that for a "skip" due to failed patch; update a test to
understand this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a commit to the p4 workspace fails, a prompt
asks what to do next. This belongs up in run() instead
of in applyCommit(), where run() can notice, for instance,
that the prompt is unnecessary because this is the last commit.
Offer two options about how to continue at conflict: [s]kip or
[q]uit. Having an explicit "quit" option gives git p4 a chance
to clean up, show the applied-commit summary, and do tag export.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit fails to apply cleanly to the p4 tree, an interactive
prompt asks what to do next. In all cases (skip, apply, write),
the behavior after the prompt had a few problems.
Change it so that it does not claim erroneously that all commits
were applied. Instead list the set of the patches under
consideration, and mark with an asterisk those that were
applied successfully. Like this example:
Applying 592f1f9 line5 in file1 will conflict
...
Unfortunately applying the change failed!
What do you want to do?
[s]kip this patch / [a]pply the patch forcibly and with .rej files / [w]rite the patch to a file (patch.txt) s
Skipping! Good luck with the next patches...
//depot/file1#4 - was edit, reverted
Applying b8db1c6 okay_commit_after_skip
...
Change 6 submitted.
Applied only the commits marked with '*':
592f1f9 line5 in file1 will conflict
* b8db1c6 okay_commit_after_skip
Do not try to sync and rebase unless all patches were applied.
If there was a conflict during the submit, there is sure to be one
at the rebase. Let the user to do the sync and rebase manually.
This changes how a couple tets in t9810-git-p4-rcs.sh behave:
- git p4 now does not leave files open and edited in the
client
- If a git commit contains a change to a file that was
deleted in p4, the test used to check that the sync/rebase
loop happened after the failure to apply the change. Since
now sync/rebase does not happen after failure, do not test
this. Normal rebase machinery, outside of git p4, will let
rebase --skip work.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used to have a bug that ignores "--all-match", that requires
all "--grep" to have matched, when "--author" or "--committer" was used.
Make sure the bug will not be reintroduced.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are tests for this interaction already. Restructure slightly and
avoid any claims about --all-match.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--all-match" option is about "--grep", and does not affect how
"--author" or "--committer" limitation is applied.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log --grep tests generate the expected out in different ways.
Make them all use command blocks so that subshells are avoided and the
expected output is easier to grasp visually.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -Xtheirs" did not help content-level merge of binary
files; it should just take their version. Also "*.jpg binary" in
the attributes did not imply they should use the binary ll-merge
driver.
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
Recent versions of Linux libc (later than 5.4.23) and glibc (2.x)
include a malloc() implementation which is tunable via environment
variables. When MALLOC_CHECK_ is set, a special (less efficient)
implementation is used which is designed to be tolerant against
simple errors, such as double calls of free() with the same argument,
or overruns of a single byte (off-by-one bugs). When MALLOC_CHECK_
is set to 3, a diagnostic message is printed on stderr
and the program is aborted.
Setting the MALLOC_PERTURB_ environment variable causes the malloc
functions in libc to return memory which has been wiped and clear
memory when it is returned.
Of course this does not affect calloc which always does clear the memory.
The reason for this exercise is, of course, to find code which uses
memory returned by malloc without initializing it and code which uses
code after it is freed. valgrind can do this but it's costly to run.
The MALLOC_PERTURB_ exchanges the ability to detect problems in 100%
of the cases with speed.
The byte value used to initialize values returned by malloc is the byte
value of the environment value. The value used to clear memory is the
bitwise inverse. Setting MALLOC_PERTURB_ to zero disables the feature.
This technique can find hard to detect bugs.
It is therefore suggested to always use this flag (at least temporarily)
when testing out code or a new distribution.
But the test suite can use also valgrind(memcheck) via 'make valgrind'
or 'make GIT_TEST_OPTS="--valgrind"'.
Memcheck wraps client calls to malloc(), and puts a "red zone" on
each end of each block in order to detect access overruns.
Memcheck already detects double free() (up to the limit of the buffer
which remembers pending free()). Thus memcheck subsumes all the
documented coverage of MALLOC_CHECK_.
If MALLOC_CHECK_ is set non-zero when running memcheck, then the
overruns that might be detected by MALLOC_CHECK_ would be overruns
on the wrapped blocks which include the red zones. Thus MALLOC_CHECK_
would be checking memcheck, and not the client. This is not useful,
and actually is wasteful. The only possible [documented] advantage
of using MALLOC_CHECK_ and memcheck together, would be if MALLOC_CHECK_
detected duplicate free() in more cases than memcheck because memcheck's
buffer is too small.
Therefore we don't use MALLOC_CHECK_ and valgrind(memcheck) at the
same time.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/abspath:
t0060: split absolute path test in two to exercise some of it on Windows
t0060: verify that real_path() removes extra slashes
real_path(): properly handle nonexistent top-level paths
t0060: verify that real_path() works correctly with absolute paths
real_path(): reject the empty string
t0060: verify that real_path() fails if passed the empty string
absolute_path(): reject the empty string
t0060: verify that absolute_path() fails if passed the empty string
t0060: move tests of real_path() from t0000 to here
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
* rj/tap-fix:
test-lib.sh: Suppress the "passed all ..." message if no tests run
test-lib.sh: Add check for invalid use of 'skip_all' facility
test-lib.sh: Fix some shell coding style violations
t4016-*.sh: Skip all tests rather than each test
t3902-*.sh: Skip all tests rather than each test
t3300-*.sh: Fix a TAP parse error
In case 'git cherry-pick -s <commit>' failed, the user had to use 'git
commit -s' (i.e. state the -s option again), which is easy to forget
about. Instead, write the signed-off-by line early, so plain 'git
commit' will have the same result.
Also update 'git commit -s', so that in case there is already a relevant
Signed-off-by line before the Conflicts: line, it won't add one more at
the end of the message. If there is no such line, then add it before the
the Conflicts: line.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
"git for-each-ref" did not honor multiple "--sort=<key>" arguments
correctly.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
It used to be that if "--all", "--depth", and also explicit references
were sought, then the explicit references were not handled correctly
in filter_refs() because the "--all --depth" code took precedence over
the explicit reference handling, and the explicit references were
never noted as having been found. So check for explicitly sought
references before proceeding to the "--all --depth" logic.
This fixes two test cases in t5500.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_pack() removes duplicates from the "sought" list, thereby
shrinking the list. But previously, the caller was not informed about
the shrinkage. This would cause a spurious error message to be
emitted by cmd_fetch_pack() if "git fetch-pack" is called with
duplicate refnames.
Instead, remove duplicates using string_list_remove_duplicates(),
which adjusts sought->nr to reflect the new length of the list.
The last test of t5500 inexplicably *required* "git fetch-pack" to
fail when fetching a list of references that contains duplicates;
i.e., it insisted on the buggy behavior. So change the test to expect
the correct behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some bugs in "git fetch-pack":
1. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing non-tag reference to fetch, then it falsely reports
that the reference was not found, even though it was fetched
correctly.
2. If "git fetch-pack" is called with "--all", "--depth", and an
explicit existing tag reference to fetch, then it segfaults in
filter_refs() because return_refs is used without having been
initialized.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git fetch-pack" is called with reference names that do not exist
on the remote, then it should emit an error message
error: no such remote ref refs/heads/xyzzy
This is currently broken if *only* missing references are passed to
"git fetch-pack".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that finds the longest string from a string_list that
is a prefix of a given string.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that deletes duplicate entries from a sorted
string_list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function allows entries that don't match a specified criterion to
be discarded from a string_list while preserving the order of the
remaining entries.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new functions, string_list_split() and
string_list_split_in_place(). These split a string into a string_list
on a separator character. The first makes copies of the substrings
(leaving the input string untouched) and the second splits the
original string in place, overwriting the separator characters with
NULs and referring to the original string's memory.
These functions are similar to the strbuf_split_*() functions except
that they work with the more powerful string_list interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame file" has always meant "find the origin of each line of
the file in the history leading to HEAD, oh by the way, blame the
lines that are modified locally to the working tree".
This teaches "git blame" that during a conflicted merge, some
uncommitted changes may have come from the other history that is
being merged.
The verify_working_tree_path() function introduced in the previous
patch to notice a typo in the filename (primarily on case insensitive
filesystems) has been updated to allow a filename that does not exist
in HEAD (i.e. the tip of our history) as long as it exists one of the
commits being merged, so that a "we deleted, the other side modified"
case tracks the history of the file in the history of the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git ships with a fall-back regexp implementation for platforms with
buggy regexp library; give people a tool to see if they should be
using it on their platform.
* rj/test-regex:
test-regex: Add a test to check for a bug in the regex routines
* jc/test-prereq:
t3910: use the UTF8_NFD_TO_NFC test prereq
test-lib: provide UTF8 behaviour as a prerequisite
t0050: use the SYMLINKS test prereq
t0050: use the CASE_INSENSITIVE_FS test prereq
test-lib: provide case insensitivity as a prerequisite
test: allow prerequisite to be evaluated lazily
test: rename $satisfied to $satisfied_prereq
"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
We tried to bend backwards to allow "--quiet" to be a synonym as
"-s" when given as e.g. "git show --quiet", but did not quite
succeed.
* jk/maint-quiet-is-synonym-to-s-in-log:
log: fix --quiet synonym for -s
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
"git send-email" did not unquote encoded words that appear on the
header correctly, and lost "_" from strings.
* tr/maint-send-email-2047:
send-email: improve RFC2047 quote parsing
Only the first half of the test works only on POSIX, the second half
passes on Windows as well.
A later test "real path removes other extra slashes" looks very similar,
but it does not make sense to split it in the same way: When two slashes
are prepended in front of an absolute DOS-style path on Windows, the
meaning of the path is changed (//server/share style), so that the test
cannot pass on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in "binary" attribute macro expands to "-diff -text", so
that textual diff is not produced, and the contents will not go
through any CR/LF conversion ever. During a merge, it should also
choose the "binary" low-level merge driver, but it didn't.
Make it expand to "-diff -merge -text".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to
give a quick and dirty way to come up with a random mixture of
cleanly merged parts and punted conflict resolution to take contents
from one side in conflicting parts. These options however were only
passed down to the low level merge driver for text.
Teach the built-in binary merge driver to notice them as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or
mode changes have preimage and postimage pathnames in different
places in a form that can be parsed unambiguously and did not suffer
from this problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
"git for-each-ref" did not currectly support more than one --sort
option.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
Fix "git p4" when "--use-client-spec" and "--detect-branches" are
used together (the command used to misdetect branches).
* pw/p4-use-client-spec-branch-detection:
git p4: make branch detection work with --use-client-spec
git p4: do wildcard decoding in stripRepoPath
git p4: set self.branchPrefixes in initialization
git p4 test: add broken --use-client-spec --detect-branches tests
git p4 test: move client_view() function to library
Update tests that can be broken with gettext-poison builds.
* nd/i18n-poison-test-updates:
Fix tests under GETTEXT_POISON on parseopt
Fix tests under GETTEXT_POISON on git-remote
Fix tests under GETTEXT_POISON on pack-object
Fix tests under GETTEXT_POISON on git-apply
Fix tests under GETTEXT_POISON on diffstat
Fix tests under GETTEXT_POISON on git-stash
Fix tests under GETTEXT_POISON on relative dates
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjusted for Windows by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change has two points:
1. Do not strip off a leading slash, because that erroneously turns an
absolute path into a relative path.
2. Do not remove slashes from groups of multiple slashes; instead let
chdir() handle them. It could be, for example, that it wants to
leave leading double-slashes alone.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently a bug: if passed an absolute top-level path that
doesn't exist (e.g., "/foo") it incorrectly interprets the path as a
relative path (e.g., returns "$(pwd)/foo"). So mark the test as
failing.
These tests are skipped on Windows because test-path-utils operates on
a DOS-style absolute path even if a POSIX style absolute path is
passed as argument.
Adjusted for Windows by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update --force" used to leave the working tree of the
submodule intact when there were local changes. It is more intiutive
to make "--force" a sign to run "checkout -f" to overwrite them.
* sz/submodule-force-update:
Make 'git submodule update --force' always check out submodules.
"git stash" internally used "git merge-recursive" backend, which did
not trigger "rerere" upon conflicts unlike other mergy operations.
* ph/stash-rerere:
stash: invoke rerere in case of conflict
test: git-stash conflict sets up rerere
"git cherry-pick" by default stops when it sees a commit without any
log message. The "--allow-empty-message" option can be used to
silently proceed.
* cw/cherry-pick-allow-empty-message:
cherry-pick: add --allow-empty-message option
If a test script issues a test_done without executing any tests, for
example when using the 'skip_all' facility, the output looks something
like this:
$ ./t9159-git-svn-no-parent-mergeinfo.sh
# passed all 0 test(s)
1..0 # SKIP skipping git svn tests, svn not found
$
The "passed all 0 test(s)" comment line, while correct, looks a little
strange. Add a check to suppress this message if no tests have actually
been run.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'skip_all' facility cannot be used after one or more tests
have been executed using (for example) 'test_expect_success'.
To do so results in invalid TAP output, which leads to 'prove'
complaining of "Parse errors: No plan found in TAP output".
Add a check for such invalid usage and abort the test with an
error message to alert the test author.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each test in this file is skipped if the TABS_IN_FILENAMES test
prerequisite is set. Use the 'skip_all' facility at the head of
the file to skip all of the tests instead.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each test in this file is skipped if the TABS_IN_FILENAMES test
prerequisite is set. Use the 'skip_all' facility at the head of
the file to skip all of the tests instead.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At present, running the t3300-*.sh test on cygwin looks like:
$ cd t
$ ./t3300-funny-names.sh
ok 1 - setup
# passed all 1 test(s)
1..1 # SKIP Your filesystem does not allow tabs in filenames
$
Unfortunately, this is not valid TAP output, which prove notes
as follows:
$ prove --exec sh t3300-funny-names.sh
t3300-funny-names.sh .. All 1 subtests passed
Test Summary Report
-------------------
t3300-funny-names.sh (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
Files=1, Tests=1, 2 wallclock secs ( 0.05 usr 0.00 sys + \
0.90 cusr 0.49 csys = 1.43 CPU)
Result: FAIL
$
This is due to the 'trailing_plan' having a 'skip_directive'
attached to it. This is not allowed by the TAP grammar, which
only allows a 'leading_plan' to be followed by an optional
'skip_directive'. (see perldoc TAP::Parser::Grammar).
A trailing_plan is one that appears in the TAP output after one or
more test status lines (that start 'not '? 'ok ' ...), whereas a
leading_plan must appear before all test status lines (if any).
In practice, this means that the test script cannot contain a use
of the 'skip all' facility:
skip_all='Some reason to skip *all* tests in this file'
test_done
after having already executed one or more tests with (for example)
'test_expect_success'. Unfortunately, this is exactly what this
test script is doing. The first 'setup' test is actually used to
determine if the test prerequisite is satisfied by the filesystem
(ie does it allow tabs in filenames?).
In order to fix the parse errors, place the code to determine the
test prerequisite at the top level of the script, prior to the
first test, rather than as a parameter to test_expect_success.
This allows us to correctly use 'skip_all', thus:
$ ./t3300-funny-names.sh
# passed all 0 test(s)
1..0 # SKIP Your filesystem does not allow tabs in filenames
$
$ prove --exec sh t3300-funny-names.sh
t3300-funny-names.sh .. skipped: Your filesystem does not \
allow tabs in filenames
Files=1, Tests=0, 2 wallclock secs ( 0.02 usr 0.03 sys + \
0.84 cusr 0.41 csys = 1.29 CPU)
Result: NOTESTS
$
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When giving multiple individual revisions to cherry-pick or revert, as
in 'git cherry-pick A B' or 'git revert B A', one would expect them to
be picked/reverted in the order given on the command line. They are
instead ordered by their commit timestamp -- in chronological order
for "cherry-pick" and in reverse chronological order for
"revert". This matches the order in which one would usually give them
on the command line, making this bug somewhat hard to notice. Still,
it has been reported at least once before [1].
It seems like the chronological sorting happened by accident because
the revision walker has traditionally always sorted commits in reverse
chronological order when rev_info.no_walk was enabled. In the case of
'git revert B A' where B is newer than A, this sorting is a no-op. For
'git cherry-pick A B', the sorting would reverse the arguments, but
because the sequencer also flips the rev_info.reverse flag when
picking (as opposed to reverting), the end result is a chronological
order. The rev_info.reverse flag was probably flipped so that the
revision walker emits B before C in 'git cherry-pick A..C'; that it
happened to effectively undo the unexpected sorting done when not
walking, was probably a coincidence that allowed this bug to happen at
all.
Fix the bug by telling the revision walker not to sort the commits
when not walking. The only case we want to reverse the order is now
when cherry-picking and walking revisions (rev_info.no_walk = 0).
[1] http://thread.gmane.org/gmane.comp.version-control.git/164794
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cherry-picking commits out of order (w.r.t. commit time stamp) doesn't
currently work. Add a test case to demonstrate it.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This interface is error prone, and a better one (--set-upstream-to)
exists. Add a message listing the alternatives and suggest how to fix
a --set-upstream invocation in case the user only gives one argument
which causes a local branch with the same name as a remote-tracking
one to be created. The typical case is
git branch --set-upstream origin/master
when the user meant
git branch --set-upstream master origin/master
assuming that the current branch is master. Show a message telling the
user how to undo their action and get what they wanted. For the
command above, the message would be
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
If you wanted to make 'master' track 'origin/master', do this:
git branch -d origin/master
git branch --set-upstream-to origin/master
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have ways of setting the upstream information, but if we want to
unset it, we need to resort to modifying the configuration manually.
Teach branch an --unset-upstream option that unsets this information.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the "--quiet" option was parsed by the
diff-option parser into the internal QUICK option. This had
the effect of silencing diff output from the log (which was
not intended, but happened to work and people started to
use it). But it also had other odd side effects at the diff
level (for example, it would suppress the second commit in
"git show A B").
To fix this, commit 1c40c36 converted log to parse-options
and handled the "quiet" option separately, not passing it
on to the diff code. However, it simply ignored the option,
which was a regression for people using it as a synonym for
"-s". Commit 01771a8 then fixed that by interpreting the
option to add DIFF_FORMAT_NO_OUTPUT to the list of output
formats.
However, that commit did not fix it in all cases. It sets
the flag after setup_revisions is called. Naively, this
makes sense because you would expect the setup_revisions
parser to overwrite our output format flag if "-p" or
another output format flag is seen.
However, that is not how the NO_OUTPUT flag works. We
actually store it in the bit-field as just another format.
At the end of setup_revisions, we call diff_setup_done,
which post-processes the bitfield and clears any other
formats if we have set NO_OUTPUT. By setting the flag after
setup_revisions is done, diff_setup_done does not have a
chance to make this tweak, and we end up with other format
options still set.
As a result, the flag would have no effect in "git log -p
--quiet" or "git show --quiet". Fix it by setting the
format flag before the call to setup_revisions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"grep" learned to use a non-standard pattern type by default if a
configuration variable tells it to.
* js/grep-patterntype-config:
grep: add a grep.patternType configuration setting
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
The output from "git diff -B" for a file that ends with an
incomplete line did not put "\ No newline..." on a line of its own.
* ab/diff-write-incomplete-line:
Fix '\ No newline...' annotation in rewrite diffs
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
In the next major release, we will switch "git push [$there]" that
does not say what to push from the traditional "matching" to the
updated "simple" semantics, that pushes the current branch to the
branch with the same name only when the current branch is set to
integrate with that remote branch (all other cases will error out).
* mm/push-default-switch-warning:
push: start warning upcoming default change for push.default
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit
986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites set up http access to repositories such that
fetching is anonymous and unauthenticated, but pushing is
authenticated. While there are multiple ways to do this, the
technique advertised in the git-http-backend manpage is to
block access to locations matching "/git-receive-pack$".
Let's emulate that advice in our test setup, which makes it
clear that this advice does not actually work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not currently test authentication over smart-http at
all. In theory, it should work exactly as it does for dumb
http (which we do test). It does indeed work for these
simple tests, but this patch lays the groundwork for more
complex tests in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not currently test authentication for smart-http repos
at all. Part of the infrastructure to do this is recognizing
that auth/smart is indeed a smart-http repo.
The current apache config recognizes only "^/smart/*" as
smart-http. Let's instead treat anything with /smart/ in the
URL as smart-http. This is obviously a stupid thing to do
for a real production site, but for our test suite we know
that our repositories will not have this magic string in the
name.
Note that we will route /foo/smart/bar.git directly to
git-http-backend/bar.git; in other words, everything before
the "/smart/" is irrelevant to finding the repo on disk (but
may impact apache config, for example by triggering auth
checks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test apache config points all of auth/ directly to the
on-disk repositories via an Alias directive. This works fine
because everything authenticated is currently in auth/dumb,
which is a subset. However, this would conflict with a
ScriptAlias for auth/smart (which will come in future
patches), so let's narrow the Alias.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t5550 script sets up a nice askpass helper for
simulating user input and checking what git prompted for.
Let's make it available to other http scripts by migrating
it to lib-httpd.
We can use this immediately in t5540 to make our tests more
robust (previously, we did not check at all that hitting the
password-protected repo actually involved a password).
Unfortunately, we end up failing the test because the
current code erroneously prompts twice (once for
git-remote-http, and then again when the former spawns
git-http-push).
More importantly, though, it will let us easily add
smart-http authentication tests in t5541 and t5551; we
currently do not test smart-http authentication at all.
As part of making it generic, let's always look for and
store auxiliary askpass files at the top-level trash
directory; this makes it compatible with t5540, which runs
some tests from sub-repositories. We can abstract away the
ugliness with a short helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most of our tests, we put repos to be accessed by dumb
protocols in /dumb, and repos to be accessed by smart
protocols in /smart. In our test apache setup, the whole
/auth hierarchy requires authentication. However, we don't
bother to split it by smart and dumb here because we are not
currently testing smart-http authentication at all.
That will change in future patches, so let's be explicit
that we are interested in testing dumb access here. This
also happens to match what t5540 does for the push tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for git-remote.
This issue was was introduced in v1.7.10-233-gbb16d5:
bb16d5 i18n: remote: mark strings for translation
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for pack-object.
This issue was was introduced in v1.7.10.2-556-g46140:
46140 index-pack: use streaming interface for collision test on large blobs
cf2ba pack-objects: use streaming interface for reading large loose blobs
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for git-apply.
This issue was was introduced in the following commits:
de373 i18n: apply: mark parseopt strings for translation
3638e i18n: apply: mark strings for translation
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test functions in test scripts for diffstat.
This issue was was introduced in v1.7.9-1-g7f814:
7f814 Use correct grammar in diffstat summary line
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use i18n-specific test functions in test scripts for git-stash.
This issue was was introduced in v1.7.4.1-119-g355ec:
355ec i18n: git-status basic messages
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the i18n-specific test_i18ncmp in t/t0006-date.sh for relative dates
tests. This issue was was introduced in v1.7.10-230-g7d29a:
7d29a i18n: mark relative dates for translation
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when "git apply" was written, we made sure that the user can
skip more than the default number of path components (i.e. 1) by
giving "-p<n>", but the logic for doing so was built around the
notion of "we skip N slashes and stop". This obviously does not
work well when running under -p0 where we do not want to skip any,
but still want to skip SP/HT that separates the pathnames of
preimage and postimage and want to reject absolute pathnames.
Stop using "stop_at_slash()", and instead introduce a new helper
"skip_tree_prefix()" with similar logic but works correctly even for
the -p0 case.
This is an ancient bug, but has been masked for a long time because
most of the patches are text and have other clues to tell us the
name of the preimage and the postimage.
Noticed by Colin McCabe.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.11:
Prepare for 1.7.11.6
Make the ciabot scripts completely self-configuring in the normal case.
Improved documentation for the ciabot scripts.
man: git pull -r is a short for --rebase
gitcli: describe abbreviation of long options
rev-list docs: clarify --topo-order description
Documentation/CodingGuidelines: spell out more shell guidelines
Documentation: do not mention .git/refs/* directories
tests: Introduce test_seq
Currently, it will only do a checkout if the sha1 registered in the containing
repository doesn't match the HEAD of the submodule, regardless of whether the
submodule is dirty. As discussed on the mailing list, the '--force' flag is a
strong indicator that the state of the submodule is suspect, and should be reset
to HEAD.
Signed-off-by: Stefan Zager <szager@google.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing --set-uptream option can cause confusion, as it uses the
usual branch convention of assuming a starting point of HEAD if none
is specified, causing
git branch --set-upstream origin/master
to create a new local branch 'origin/master' that tracks the current
branch. As --set-upstream already exists, we can't simply change its
behaviour. To work around this, introduce --set-upstream-to which
accepts a compulsory argument indicating what the new upstream branch
should be and one optinal argument indicating which branch to change,
defaulting to HEAD.
The new options allows us to type
git branch --set-upstream-to origin/master
to set the current branch's upstream to be origin's master.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" did not unquote encoded words that appear on the
header correctly, and lost "_" from strings.
* tr/maint-send-email-2047:
send-email: improve RFC2047 quote parsing
Teaches the test framework to probe rarely used prerequistes lazily,
and make use of it for detecting SYMLINKS, CASE_INSENSITIVE_FS and
NKD/NKC MacOS x gotcha.
* jc/test-prereq:
t3910: use the UTF8_NFD_TO_NFC test prereq
test-lib: provide UTF8 behaviour as a prerequisite
t0050: use the SYMLINKS test prereq
t0050: use the CASE_INSENSITIVE_FS test prereq
test-lib: provide case insensitivity as a prerequisite
test: allow prerequisite to be evaluated lazily
test: rename $satisfied to $satisfied_prereq
A series by Michael Schwern via Eric to update git-svn to revamp the
way URLs are internally passed around, to make it work with SVN 1.7.
* ms/git-svn-1.7:
git-svn: remove ad-hoc canonicalizations
git-svn: canonicalize newly-minted URLs
git-svn: introduce add_path_to_url function
git-svn: canonicalize earlier
git-svn: replace URL escapes with canonicalization
git-svn: attempt to mimic SVN 1.7 URL canonicalization
t9107: fix typo
t9118: workaround inconsistency between SVN versions
Git::SVN{,::Ra}: canonicalize earlier
git-svn: path canonicalization uses SVN API
Git::SVN::Utils: remove irrelevant comment
git-svn: add join_paths() to safely concatenate paths
git-svn: factor out _collapse_dotdot function
git-svn: use SVN 1.7 to canonicalize when possible
git-svn: move canonicalization to Git::SVN::Utils
use Git::SVN{,::RA}->url accessor globally
use Git::SVN->path accessor globally
Git::SVN::Ra: use accessor for URLs
Git::SVN: use accessor for URLs internally
Git::SVN: use accessors internally for path
Besides reusing the new test prerequisite, this fixes also the issue
that the current output is not TAP compliant and produces the output "no
reason given" [for skipping].
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked list describing sort options was not correctly set up in
opt_parse_sort. In the result, contrary to the documentation, only the
last of multiple --sort options to git-for-each-ref was taken into
account. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation of git-for-each-ref says that --sort=<key> option can be
used multiple times, in which case the last key becomes the primary key.
However this functionality was never checked in test suite and is
currently broken. This commit adds appropriate test in preparation for fix.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bug report in http://stackoverflow.com/questions/11893688
observes that files are mapped into the wrong locations in
git when both --use-client-spec and --branch-detection are enabled.
Fix this by changing the relative path prefix to match discovered
branches when using a client spec.
The problem was likely introduced with ecb7cf9 (git-p4: rewrite view
handling, 2012-01-02).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Tested-by: Matthew Korich <matthew@korich.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash apply" directly calls a backend merge function which does not
automatically invoke rerere. This confuses mergetool when leftover
rerere state is left behind from previous merges.
Invoke rerere explicitly when we encounter a conflict during stash
apply. This turns the test introduced by the previous commit to
succeed.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to make sure that a conflicted "stash apply" invokes
rerere to record the conflicts and resolve the the files it can
(the current code doesn't, so the test is marked as failing).
Without correct state recorded for rerere, mergetool may be
confused, causing it to think no files have conflicts even though
they do. This condition is not verified by this test since a
subsequent commit will change the behavior to enable rerere for
stash conflicts.
Also, the next test expected us to finish up with a reset, which is
impossible to do if we fail (as we must) and it's an unreasonable
expectation anyway. Begin the next test with a reset of its own
instead.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the Windows port of Git expects binary pipes, we need to make
sure the helper-end also sets up binary pipes.
Side-step CRLF-issue in test to make it pass.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various subcommands of the "git submodule" command exited with 0
status even though the path given by the user did not exist.
The reason behind that was that they all pipe the output of
module_list into the while loop which then does the action on the
paths specified by the commandline. Since the exit code of the
command on the upstream side of the pipe is ignored by the shell,
the status code of "ls-files --error-unmatch" nor "module_list" was
not propagated.
In case ls-files returns with an error code, we write a special
string that is not possible in non error situations, and no other
output, so that the downstream can detect the error and die with an
error code.
The error message that there is an unmatched pathspec comes through
stderr directly from ls-files. So the user still gets a hint whats going
on.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code will be useful in --detect-branches --use-client-spec tests.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
dcommit didn't handle errors returned by SVN and coped very
poorly with concurrent commits that appear in SVN repository
while dcommit was running. In both cases it left git repository
in inconsistent state: index (which was reset with `git reset
--mixed' after a successful commit to SVN) no longer matched the
checkouted tree, when the following commit failed or needed to be
rebased. See http://bugs.debian.org/676904 for examples.
This patch fixes the issues by:
- introducing error handler for dcommit. The handler will try
to rebase or reset working tree before returning error to the
end user. dcommit_rebase function was extracted out of cmd_dcommit
to ensure consistency between cmd_dcommit and the error handler.
- calling `git reset --mixed' only once after all patches are
successfully committed to SVN. This ensures index is not touched
for most of the time of dcommit run.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add test cases for 'git rebase --keep-empty' with and without an
"empty" commit already in upstream. The empty commit that is about to
be rebased should be kept in both cases.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack triggers 'git gc --auto' and 'git prune' is called to
remove a stale temporary object, 'git prune' prints an informational
message to stdout about the file that it will remove. Since this message
is written to stdout, it is sent back over the transport channel to the git
client which tries to interpret it as part of the pack protocol and then
promptly terminates with a complaint about a protocol error.
Introduce a test which exercises the auto-gc functionality of receive-pack
and demonstrates this breakage.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts such as "git rebase -i" cannot currently cherry-pick commits
which have an empty commit message, as git cherry-pick calls git
commit without the --allow-empty-message option.
Add an --allow-empty-message option to git cherry-pick which is passed
through to git commit, so this behaviour can be overridden.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file that ends with an incomplete line is expressed as a
complete rewrite with the -B option, git diff incorrectly
appends the incomplete line indicator "\ No newline at end of
file" after such a line, rather than writing it on a line of its
own (the output codepath for normal output without -B does not
have this problem). Add a LF after the incomplete line before
writing the "\ No newline ..." out to fix this.
Add a couple of tests to confirm that the indicator comment is
generated on its own line in both plain diff and rewrite mode.
Signed-off-by: Adam Butcher <dev.lists@jessamine.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King wrote:
The seq command is GNU-ism, and is missing at least in older BSD
releases and their derivatives, not to mention antique
commercial Unixes.
We already purged it in b3431bc (Don't use seq in tests, not
everyone has it, 2007-05-02), but a few new instances have crept
in. They went unnoticed because they are in scripts that are not
run by default.
Replace them with test_seq that is implemented with a Perl snippet
(proposed by Jeff). This is better than inlining this snippet
everywhere it's needed because it's easier to read and it's easier
to change the implementation (e.g. to C) if we ever decide to remove
Perl from the test suite.
Note that test_seq is not a complete replacement for seq(1). It
just has what we need now, in addition that it makes it possible for
us to do something like "test_seq a m" if we wanted to in the
future.
There are also many places that do `for i in 1 2 3 ...` but I'm not sure
if it's worth converting them to test_seq. That would introduce running
more processes of Perl.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the ad-hoc versions.
This is mostly to normalize the process and ensure the URLs produced
don't have double slashes or anything.
Also provides a place to fix the corner case where a file path
contains a percent sign.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Previously, our URL canonicalization didn't do much of anything.
Now it actually escapes and collapses slashes. This is mostly a cut & paste
of escape_url from git-svn.
This is closer to how SVN 1.7's canonicalization behaves. Doing it with
1.6 lets us chase down some problems caused by more effective canonicalization
without having to deal with all the other 1.7 issues on top of that.
* Remote URLs have to be canonicalized otherwise Git::SVN->find_existing_remote
will think they're different.
* The SVN remote is now written to the git config canonicalized. That
should be ok. Adjust a test to account for that.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Test to check that the migration got rid of the old style git-svn directory.
It wasn't failing, just throwing a message to STDERR.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
SVN 1.7 will truncate "not-a%40{0}" to just "not-a".
Rather than guess what SVN is going to do for each version, make the test use
the branch name that was actually created.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Otherwise you might wind up with things like...
my $path1 = undef;
my $path2 = 'foo';
my $path = $path1 . '/' . $path2;
creating '/foo'. Or this...
my $path1 = 'foo/';
my $path2 = 'bar';
my $path = $path1 . '/' . $path2;
creating 'foo//bar'.
Could have used File::Spec, but I'm shying away from it due to SVN
1.7's pickiness about paths. Felt it would be better to have our own
we can control completely.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The SVN API functions will not accept ../foo but their canonicalization
functions will not collapse it. So we'll have to do it ourselves.
_collapse_dotdot() works better than the existing regex did.
This will be used shortly when canonicalize_path() starts using the
SVN API.
[ew: commit title]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The RFC2047 unquoting, used to parse email addresses in From and Cc
headers, is broken in several ways:
* It erroneously substitutes ' ' for '_' in *the whole* header, even
outside the quoted field. [Noticed by Christoph.]
* It is too liberal in its matching, and happily matches the start
of one quoted chunk against the end of another, or even just
something that looks like such an end. [Noticed by Junio.]
* It fundamentally cannot cope with encodings that are not a
superset of ASCII, nor several (incompatible) encodings in the
same header.
This patch fixes the first two by doing a more careful decoding of
the outer quoting (e.g. "=AB" to represent an octet whose value is
0xAB). Fixing the fundamental issues is left for a future, more
intrusive, patch.
Noticed-by: Christoph Miebach <christoph.miebach@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
"git commit-tree" learned a more natural "-p <parent> <tree>" order
of arguments long time ago, but recently forgot it by mistake.
* kk/maint-commit-tree:
Revert "git-commit-tree(1): update synopsis"
commit-tree: resurrect command line parsing updates
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
"git grep" stopped spawning an external "grep" long time ago, but a
duplicated test to check internal and external "grep" was left
behind.
* rj/maint-grep-remove-redundant-test:
t7810-*.sh: Remove redundant test
Finishing touches to the new test script.
* dg/submodule-in-dismembered-working-tree:
t7409: make sure submodule is initialized and updated in more detail
The earlier test did not even make sure that the correct commit is
checked out in the submodule directory. Inspect the result in a bit
more detail.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test happened to use "rev-parse --max-count=1 HEAD" consistently
to prepare the expected output and the actual output, so the
comparison between them gave us a correct success/failure because
both output had irrelevant "--max-count=1" in it.
But that is not an excuse to keep it broken. Replace it a more
meaningful construct "rev-parse --verify HEAD".
Noticed by Daniel Graña while working on his submodule tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit bbc09c22 ("grep: rip out support for external grep",
12-01-2010), test number 60 ("grep -C1 hunk mark between files") is
essentially the same as test number 59.
Test 59 was intended to verify the behaviour of git-grep resulting
from multiple invocations of an external grep. As part of the test,
it creates and adds 1024 files to the index, which is now wasted
effort.
Remove test 59, since it is now redundant.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the final test ('flags and then non flags') fails
intermittently, depending on how much time elapsed between the
invocations of "git commit-tree" when creating the commits which
later have their commit id's compared. For example, if the commits
for childid-3 and childid-4 are created 1 or more seconds apart,
then the commits, which would otherwise be identical, will have
different commit id's.
In order to make the test reproducible, we remove the variability
by setting the author and committer times to a well defined state.
We accomplish this with a single call to 'test_tick' at the start
of the test.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short of somebody happening to beat the 1 in 2^160 odds of
actually generating content that hashes to the null sha1, we
should never see this value in a tree entry. So let's have
fsck warn if it it seen.
As in the previous commit, we test both blob and submodule
entries to future-proof the test suite against the
implementation depending on connectivity to notice the
error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should never need to write the null sha1 into an index
entry (short of the 1 in 2^160 chance that somebody actually
has content that hashes to it). If we attempt to do so, it
is much more likely that it is a bug, since we use the null
sha1 as a sentinel value to mean "not valid".
The presence of null sha1s in the index (which can come
from, among other things, "update-index --cacheinfo", or by
reading a corrupted tree) can cause problems for later
readers, because they cannot distinguish the literal null
sha1 from its use a sentinel value. For example, "git
diff-files" on such an entry would make it appear as if it
is stat-dirty, and until recently, the diff code assumed
such an entry meant that we should be diffing a working tree
file rather than a blob.
Ideally, we would stop such entries from entering even our
in-core index. However, we do sometimes legitimately add
entries with null sha1s in order to represent these sentinel
situations; simply forbidding them in add_index_entry breaks
a lot of the existing code. However, we can at least make
sure that our in-core sentinel representation never makes it
to disk.
To be thorough, we will test an attempt to add both a blob
and a submodule entry. In the former case, we might run into
problems anyway because we will be missing the blob object.
But in the latter case, we do not enforce connectivity
across gitlink entries, making this our only point of
enforcement. The current implementation does not care which
type of entry we are seeing, but testing both cases helps
future-proof the test suite in case that changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'extract-remaining' of git://git.bogomips.org/git-svn:
Extract Git::SVN::GlobSpec from git-svn.
Move Git::IndexInfo into its own file.
Load all the modules in one place and before running code.
Extract Git::SVN::Migration from git-svn.
Prepare Git::SVN::Migration for extraction from git-svn.
Extract Git::SVN::Log from git-svn.
Prepare Git::SVN::Log for extraction from git-svn.
* git://git.bogomips.org/git-svn:
Move initialization of Git::SVN variables into Git::SVN.
Extract Git::SVN from git-svn into its own .pm file.
Prepare Git::SVN for extraction into its own file.
Extract some utilities from git-svn to allow extracting Git::SVN.
perl: detect new files in MakeMaker builds
The Makefile.PL will now find .pm files itself.
Don't lose Error.pm if $@ gets clobbered.
Quiet warning if Makefile.PL is run with -w and no --localedir
Fix test breakages by a builder who does not have a valid user name
in his /etc/password entry.
* jk/autoident-test:
t7502: test early quit from commit with bad ident
t7502: handle systems where auto-identity is broken
t7502: drop confusing test_might_fail call
t7502: narrow checks for author/committer name in template
t7502: properly quote GIT_EDITOR
t7502: clean up fake_editor tests
In a superproject that has repository outside of its working tree,
"git submodule add" failed to clone a new submodule, as GIT_DIR and
GIT_WORK_TREE environment variables necessary to work in such a
superproject interfered with access to the submodule repository.
* dg/submodule-in-dismembered-working-tree:
git-submodule: work with GIT_DIR/GIT_WORK_TREE
Straight cut & paste. That's the last class.
* Make Git::SVN load it on its own, its the only thing that needs it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Put them in a new module called Git::SVN::Utils. Yeah, not terribly
original and it will be a dumping ground. But its better than having
them in the main git-svn program. At least they can be documented
and tested.
* fatal() is used by many classes.
* Change the $can_compress lexical into a function.
This should be enough to extract Git::SVN.
Signed-off-by: Michael G. Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
UTF8 behaviour of the filesystem (conversion from nfd to nfc) plays a
role in several tests and is tested in several tests. Therefore, move
the test from t0050 into the test lib and use the prerequisite in t0050.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test prerequisite mechanism is a useful way to allow some tests
in a test script to be skipped in environments that do not support
certain features (e.g. it is pointless to attempt checking how well
symbolic links are handled by Git on filesystems that do not support
them). It is OK for commonly used prerequisites to be always tested
during start-up of a test script by having a codeblock that tests a
feature and calls test_set_prereq, but for an uncommon feature,
forcing 90% of scripts to pay the same probing overhead for
prerequisite they do not care about is wasteful.
Introduce a mechanism to probe the prerequiste lazily. Changes are:
- test_lazy_prereq () function, which takes the name of the
prerequisite it probes and the script to probe for it, is
added. This only registers the name of the prerequiste that can
be lazily probed and the script to eval (without running).
- test_have_prereq() function (which is used by test_expect_success
and also can be called directly by test scripts) learns to look
at the list of prerequisites that can be lazily probed, and the
prerequisites that have already been probed that way. When asked
for a prerequiste that can be but haven't been probed, the script
registered with an earlier call to test_lazy_prereq is evaluated
and the prerequisite is set.
- test_run_lazy_prereq_() function is a helper to run the probe
script with the same kind of sandbox as regular tests, helped by
Jeff King.
Update the codeblock to probe and set SYMLINKS prerequisite using
the new mechanism as an example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other shell variables that are used to globally keep track of
states related to prerequisite have "prereq" somewhere in their
names. Be consistent and avoid potential name crashes with other
kinds of satisfaction in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings in merge-recursive for translation.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f20f387, "git commit" notices and dies much
earlier when we have a bogus commit identity. That commit
did not add a test because we cannot do so reliably (namely,
we can only trigger the behavior on a system where the
automatically generated identity is bogus). However, now
that we have a prerequisite check for this feature, we can
add a test that will at least run on systems that produce
such a bogus identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t7502.21 checks whether we write the committer name
into COMMIT_EDITMSG when it has been automatically
determined. However, not all systems can produce valid
automatic identities.
Prior to f20f387 (commit: check committer identity more
strictly), this test worked even when we did not have a
valid automatic identity, since it did not run the strict
test until after we had generated the template. That commit
tightened the check to fail early (since we would fail
later, anyway), meaning that systems without a valid GECOS
name or hostname would fail the test.
We cannot just work around this, because it depends on
configuration outside the control of the test script.
Therefore we introduce a new test_prerequisite to run this
test only on systems where automatic ident works at all.
As a result, we can drop the confusing test_must_fail bit
from the test. The intent was that by giving "git commit"
invalid input (namely, nothing to commit), that it would
stop at a predictable point, whether we had a valid identity
or not, from which we could view the contents of
COMMIT_EDITMSG. Since that assumption no longer holds, and
we can only run the test when we have a valid identity,
there is no reason not to let commit run to completion. That
lets us be more robust to other unforeseen failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7502.20, we run "git commit" and check that it warns us
that the author and committer identity are not the same
(this is always the case in the test environment, since we
set up the idents differently).
Instead of actually making a commit, we have a clean index,
so the "git commit" we run will fail. This is marked as
might_fail, which is not really correct; it will always fail
since there is nothing to commit.
However, the only reason not to do a complete commit would
be to see the intermediate state of the COMMIT_EDITMSG file
when the commit is not completed. We don't need to care
about this, though; even a complete commit will leave
COMMIT_EDITMSG for us to view. By doing a real commit and
dropping the might_fail, we are more robust against other
unforeseen failures of "git commit" that might influence our
test result.
It might seem less robust to depend on the fact that "git
commit" leaves COMMIT_EDITMSG in place after a successful
commit. However, that brings this test in line with others
parts of the script, which make the same assumption.
Furthermore, if that ever does change, the right solution is
not to prevent commit from completing, but to set EDITOR to
a script that will record the contents we see. After all,
the point of these tests is to check what the user sees in
their EDITOR, so that would be the most direct test. For
now, though, we can continue to use the "shortcut" that
COMMIT_EDITMSG is left intact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502.20 and t7502.21 check that the author and committer
name are mentioned in the commit message template under
certain circumstances. However, they end up checking a much
larger and unnecessary portion of the template. Let's narrow
their checks to the specific lines.
While we're at it, let's give these tests more descriptive
names, so their purposes are more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests tries to ensure that editor is not run due
to an early failure. However, it needs to quote the pathname
of the trash directory used in $GIT_EDITOR, since git will
pass it along to the shell. In other words, the test would
pass whether the code was correct or not, since the unquoted
editor specification would never run.
We never noticed the problem because the code is indeed
correct, so git-commit never even tried to run the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script saves us a few lines of code, and means
we consistently use $SHELL_PATH.
We can also drop the setting of the $pwd variable from
$(pwd). In the first instance, there is no reason to use it
(we can just use $(pwd) directly two lines later, since we
are interpolating the here-document). In the second
instance, it is totally pointless and probably just a
cut-and-paste from the first instance.
Finally, we can use a non-interpolating here document for
the final script, which saves some quoting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should override $HOME/.config, but we never actually tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.
However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).
Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git show"'s auto-walking behaviour was an unreliable and
unpredictable hack; it now behaves just like "git log" does when it
walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
