Similar to the previous one for send-pack, make it easier and
cleaner to add to capability advertisement.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A run of 'var ? " var" : ""' fed to a long printf string in a deeply
nested block was hard to read. Move it outside the loop and format
it into a strbuf.
As an added bonus, the trick to add "agent=<agent-name>" by using
two conditionals is replaced by a more readable version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tried to avoid sending one extra byte, NUL and nothing behind it
to signal there is no protocol capabilities being sent, on the first
command packet on the wire, but it just made the code look ugly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper function ref_update_to_be_sent() decides for each ref
if the update is to be sent based on the status previously set by
set_ref_status_for_push() and also if this is a mirrored push.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
20e8b465 (refactor ref status logic for pushing, 2010-01-08)
restructured the code to set status for each ref to be pushed, but
did not quite go far enough. We inspect the status set earlier by
set_refs_status_for_push() and then perform yet another update to
the status of a ref with an otherwise OK status to be deleted to
mark it with REF_STATUS_REJECT_NODELETE when the protocol tells us
never to delete.
Split the latter into a separate loop that comes before we enter the
per-ref loop. This way we would have one less condition to check in
the main loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a helper function to accept a line of a protocol message and
queue an update command out of the code from read_head_info().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This piece of code reads object names of shallow boundaries, not
old_sha1[], i.e. the current value the ref points at, which is to be
replaced by what is in new_sha1[].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we should have also allowed the first "shallow" to carry
the feature request trailer, but that is water under the bridge
now. This makes the next step to factor out the queuing of commands
easier to review.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "update" command in the protocol exchange consists of 40-hex old
object name, SP, 40-hex new object name, SP, and a refname, but the
first instance is further followed by a NUL with feature requests.
The command structure, which has a flex-array member that stores the
refname at the end, was allocated based on the whole length of the
update command, without excluding the trailing feature requests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make tests pass on msysgit by mostly disabling ones that are
infeasible on that platform.
* sk/mingw-tests-workaround:
t800[12]: work around MSys limitation
t9902: mingw-specific fix for gitfile link files
t4210: skip command-line encoding tests on mingw
MinGW: disable legacy encoding tests
t0110/MinGW: skip tests that pass arbitrary bytes on the command line
MinGW: Skip test redirecting to fd 4
Most of these are battle-tested in msysgit and are needed to
complete what has been merged to 'master' already.
* sk/mingw-uni-fix-more:
Win32: enable color output in Windows cmd.exe
Win32: patch Windows environment on startup
Win32: keep the environment sorted
Win32: use low-level memory allocation during initialization
Win32: reduce environment array reallocations
Win32: don't copy the environment twice when spawning child processes
Win32: factor out environment block creation
Win32: unify environment function names
Win32: unify environment case-sensitivity
Win32: fix environment memory leaks
Win32: Unicode environment (incoming)
Win32: Unicode environment (outgoing)
Revert "Windows: teach getenv to do a case-sensitive search"
tests: do not pass iso8859-1 encoded parameter
The test case "--amend option copies authorship" specifies that the
git-commit option `--amend` uses the authorship of the replaced
commit for the new commit. Add the omitted check that this property
actually holds.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t4013: test diff-tree's --stdin commit formatting
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
Once upon a time, git-log was just "rev-list | diff-tree",
and we did not bother to test it separately. These days git-log
is implemented internally, but we want to make sure that the
rev-list to diff-tree pipeline continues to function. Let's
add a basic sanity test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been illegal since cbdffe4 (check_ref_format(): tighten
refname rules, 2009-03-21), but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/alloc-commit-id-maint:
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
We generally want to avoid lookup_unknown_object, because it
results in allocating more memory for the object than may be
strictly necessary.
In this case, it is used to check whether we have an
already-parsed object before calling parse_object, to save
us from reading the object from disk. Using lookup_object
would be fine for that purpose, but we can take it a step
further. Since this code was written, parse_object already
learned the "check lookup_object" optimization, so we can
simply call parse_object directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the "index" field of struct commit is that
every allocated commit would have one. It is supposed to be
an invariant that whenever object->type is set to
OBJ_COMMIT, we have a unique index.
Commit 969eba6 (commit: push commit_index update into
alloc_commit_node, 2014-06-10) covered this case for
newly-allocated commits. However, we may also allocate an
"unknown" object via lookup_unknown_object, and only later
convert it to a commit. We must make sure that we set the
commit index when we switch the type field.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep a static counter to set the commit index on newly
allocated objects. However, since we also need to set the
index on any_objects which are converted to commits, let's
make the counter available as a public function.
While we're moving it, let's make sure the counter is
allocated as an unsigned integer to match the index field in
"struct commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call lookup_commit, lookup_tree, etc, the logic goes
something like:
1. Look for an existing object struct. If we don't have
one, allocate and return a new one.
2. Double check that any object we have is the expected
type (and complain and return NULL otherwise).
3. Convert an object with type OBJ_NONE (from a prior
call to lookup_unknown_object) to the expected type.
We can encapsulate steps 2 and 3 in a helper function which
checks whether we have the expected object type, converts
OBJ_NONE as appropriate, and returns the object.
Not only does this shorten the code, but it also provides
one central location for converting OBJ_NONE objects into
objects of other types. Future patches will use that to
enforce type-specific invariants.
Since this is a refactoring, we would want it to behave
exactly as the current code. It takes a little reasoning to
see that this is the case:
- for lookup_{commit,tree,etc} functions, we are just
pulling steps 2 and 3 into a function that does the same
thing.
- for the call in peel_object, we currently only do step 3
(but we want to consolidate it with the others, as
mentioned above). However, step 2 is a noop here, as the
surrounding conditional makes sure we have OBJ_NONE
(which we want to keep to avoid an extraneous call to
sha1_object_info).
- for the call in lookup_commit_reference_gently, we are
currently doing step 2 but not step 3. However, step 3
is a noop here. The object we got will have just come
from deref_tag, which must have figured out the type for
each object in order to know when to stop peeling.
Therefore the type will never be OBJ_NONE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only way that "obj" can be non-NULL is if it came from
one of the lookup_* functions. These functions always ensure
that the object has the expected type (and return NULL
otherwise), so there is no need for us to set the type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct object" type implements basic object
polymorphism. Individual instances are allocated as
concrete types (or as a union type that can store any
object), and a "struct object *" can be cast into its real
type after examining its "type" enum. This means it is
dangerous to have a type field that does not match the
allocation (e.g., setting the type field of a "struct blob"
to "OBJ_COMMIT" would mean that a reader might read past the
allocated memory).
In most of the current code this is not a problem; the first
thing we do after allocating an object is usually to set its
type field by passing it to create_object. However, the
virtual commits we create in merge-recursive.c do not ever
get their type set. This does not seem to have caused
problems in practice, though (presumably because we always
pass around a "struct commit" pointer and never even look at
the type).
We can fix this oversight and also make it harder for future
code to get it wrong by setting the type directly in the
object allocation functions.
This will also make it easier to fix problems with commit
index allocation, as we know that any object allocated by
alloc_commit_node will meet the invariant that an object
with an OBJ_COMMIT type field will have a unique index
number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the allocator functions for tree, blobs, etc are all
very similar, we originally used a macro to avoid repeating
ourselves. Since the prior commit, though, the heavy lifting
is done by an inline helper function. The macro does still
save us a few lines, but at some readability cost. It
obfuscates the function definitions (and makes them hard to
find via grep).
Much worse, though, is the fact that it isn't used
consistently for all allocators. Somebody coming later may
be tempted to modify DEFINE_ALLOCATOR, but they would miss
alloc_commit_node, which is treated specially.
Let's just drop the macro and write everything out
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to encapsulate the setting of the unique commit index, commit
969eba63 ("commit: push commit_index update into alloc_commit_node",
10-06-2014) introduced a (logically private) intermediary allocator
function. However, this function (alloc_raw_commit_node()) was declared
as a public function, which undermines its entire purpose.
Introduce an inline function, alloc_node(), which implements the main
logic of the allocator used by DEFINE_ALLOCATOR, and redefine the macro
in terms of the new function. In addition, use the new function in the
implementation of the alloc_commit_node() allocator, rather than the
intermediary allocator, which can now be removed.
Noticed by sparse ("symbol 'alloc_raw_commit_node' was not declared.
Should it be static?").
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --fork-point" did not filter out patch-identical
commits correctly.
* jk/rebase-am-fork-point:
rebase: omit patch-identical commits with --fork-point
rebase--am: use --cherry-pick instead of --ignore-if-in-upstream
"git replace" learned a "--graft" option to rewrite parents of a
commit.
* cc/replace-graft:
replace: add test for --graft with a mergetag
replace: check mergetags when using --graft
replace: add test for --graft with signed commit
replace: remove signature when using --graft
contrib: add convert-grafts-to-replace-refs.sh
Documentation: replace: add --graft option
replace: add test for --graft
replace: add --graft option
replace: cleanup redirection style in tests
* jk/stable-prio-queue:
t5539: update a flaky test
paint_down_to_common: use prio_queue
prio-queue: make output stable with respect to insertion
prio-queue: factor out compare and swap operations
When parsing "index" lines from a git-diff, we look for a
space followed by the mode. If we don't have a space, then
we set our pointer to the end-of-line. However, we don't
double-check that our end-of-line pointer is valid (e.g., if
we got a truncated diff input), which could lead to some
wrap-around pointer arithmetic.
In most cases this would probably get caught by our "40 <
len" check later in the function, but to be on the safe
side, let's just use strchrnul to treat end-of-string the
same as end-of-line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see the core.commentchar config option, we extract
the string with git_config_string, which does two things:
1. It complains via config_error_nonbool if there is no
string value.
2. It makes a copy of the string.
Since we immediately parse the string into its
single-character value, we only care about (1). And in fact
(2) is a detriment, as it means we leak the copy. Instead,
let's just check the pointer value ourselves, and parse
directly from the const string we already have.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function starts by creating a copy of the static buffer
returned by real_path, but forgets to free it in the error
code paths. We can solve this by jumping to the cleanup code
that is already there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A call to "dwim_ref(name, len, flags, &ref)" will allocate a
new string in "ref" to return the exact ref we found. We do
not consistently free it in all code paths, leading to small
leaks. The worst is in get_sha1_basic, which may be called
many times (e.g., by "cat-file --batch"), though it is
relatively unlikely, as it only triggers on a bogus reflog
specification.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to do this so could pass a mutable string to
enter_repo. But since 1c64b48 (enter_repo: do not modify
input, 2011-10-04), this is not necessary.
The resulting code is simpler, and it fixes a minor leak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unix-domain socket used by the sample credential cache daemon
tried to unlink an existing stale one at a wrong path, if the path
to the socket was given as an overlong path that does not fit in
sun_path member of the sockaddr_un structure.
* rs/fix-unlink-unix-socket:
unix-socket: remove stale socket before calling chdir()
Apply the "if cloning from a local disk, physically copy repository
using hardlinks, unless otherwise told not to with --no-local"
optimization when url.*.insteadOf mechanism rewrites a "git clone
$URL" that refers to a repository over the network to a clone from
a local disk.
* mb/local-clone-after-applying-insteadof:
use local cloning if insteadOf makes a local URL
Google mail has had the extension @googlemail.com for a long time
in Germany as @gmail.de was already taken by a competitor.
Nowadays the original gmail company isn't there anymore(?), hence
Googlemail also introduced @gmail.com in Germany, which I switched to.
This changed mail address of mine first appeared in 398dd4bd03
(2014-07-10, .mailmap: map different names with the same email
address together) ironically.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to http://meta.ohloh.net/2014/07/black-duck-open-hub/
the site name of ohloh changed to openhub.
Change the man page accordingly.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
