Update tests around the use of hook scripts.
* ab/hook-tests-updates:
http tests: use "test_hook" for "smart" and "dumb" http tests
proc-receive hook tests: use "test_hook" instead of "write_script"
tests: extend "test_hook" for "rm" and "chmod -x", convert "$HOOK"
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases
tests: change "mkdir -p && write_script" to use "test_hook"
tests: change "cat && chmod +x" to use "test_hook"
gc + p4 tests: use "test_hook", remove sub-shells
fetch+push tests: use "test_hook" and "test_when_finished" pattern
bugreport tests: tighten up "git bugreport -s hooks" test
tests: assume the hooks are disabled by default
http tests: don't rely on "hook/post-update.sample"
hook tests: turn exit code assertions into a loop
test-lib-functions: add and use a "test_hook" wrapper
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
Finishing touches to C rewrite of "git add -i" in single-key
interactive mode.
* pw/add-p-single-key:
terminal: restore settings on SIGTSTP
terminal: work around macos poll() bug
terminal: don't assume stdin is /dev/tty
terminal: use flags for save_term()
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
"git rebase $base $non_branch_commit", when $base is an ancestor or
the $non_branch_commit, modified the current branch, which has been
corrected.
* jc/rebase-detach-fix:
rebase: set REF_HEAD_DETACH in checkout_up_to_date()
rebase: use test_commit helper in setup
When "shallow" information is updated, we forgot to update the
in-core equivalent, which has been corrected.
* jt/reset-grafts-when-resetting-shallow:
shallow: reset commit grafts when shallow is reset
Correct a bug in unpack-trees introduced earlier.
* vd/cache-bottom-fix:
Revert "unpack-trees: improve performance of next_cache_entry"
unpack-trees: increment cache_bottom for sparse directories
t1092: add sparse directory before cone in test repo
Code clean-up.
* ab/refs-various-fixes:
refs debug: add a wrapper for "read_symbolic_ref"
packed-backend: remove stub BUG(...) functions
misc *.c: use designated initializers for struct assignments
refs: use designated initializers for "struct ref_iterator_vtable"
refs: use designated initializers for "struct ref_storage_be"
When "git fetch --recurse-submodules" grabbed submodule commits
that would be needed to recursively check out newly fetched commits
in the superproject, it only paid attention to submodules that are
in the current checkout of the superproject. We now do so for all
submodules that have been run "git submodule init" on.
* gc/recursive-fetch-with-unused-submodules:
submodule: fix latent check_has_commit() bug
fetch: fetch unpopulated, changed submodules
submodule: move logic into fetch_task_create()
submodule: extract get_fetch_task()
submodule: store new submodule commits oid_array in a struct
submodule: inline submodule_commits() into caller
submodule: make static functions read submodules from commits
t5526: create superproject commits with test helper
t5526: stop asserting on stderr literally
t5526: introduce test helper to assert on fetches
Updates to refs traditionally weren't fsync'ed, but we can
configure using core.fsync variable to do so.
* ps/fsync-refs:
core.fsync: new option to harden references
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.19 cusr 0.05 csys = 0.26 CPU)
Result: FAIL
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the short help output from "git reset -h", the recently added
"--[no-]refresh" option is shown like so:
--refresh skip refreshing the index after reset
which explains what happens when the option is given in the negative
form, i.e. "--no-refresh". We could rephrase the explanation to
read "refresh the index after reset (default)" to hint that the user
can say "--no-refresh" to override the default, but listing the
"--no-refresh" form in the list of options would be more helpful.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
[1] https://lore.kernel.org/git/xmqqy2179o3c.fsf@gitster.g/
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion support (in contrib/) learns to give
modified paths to the "git restore" command.
* dc/complete-restore:
completion: tab completion of filenames for 'git restore'
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
"git repack" learned a new configuration to disable triggering of
age-old "update-server-info" command, which is rarely useful these
days.
* ps/repack-with-server-info:
repack: add config to skip updating server info
repack: refactor to avoid double-negation of update-server-info
"git name-rev" learned to use the generation numbers when setting
the lower bound of searching commits used to explain the revision,
when available, instead of committer time.
* jk/name-rev-w-genno:
name-rev: use generation numbers if available
Get rid of one use of __asm__() GCC extension that does not help us
much these days, which has an added advantage of not having to
worry about -pedantic complaining.
* bc/block-sha1-without-gcc-asm-extension:
block-sha1: remove use of obsolete x86 assembly
Rewrite of "git submodule update" in C (early part).
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Before/after examples with long upstream state indicator:
| Before | After |
| ------------------------------- | ------------------------------- |
| (main u=) | (main|u=) |
| (main u= origin/main) | (main|u= origin/main) |
| (main u+1) | (main|u+1) |
| (main u+1 origin/main) | (main|u+1 origin/main) |
| (main % u=) | (main %|u=) |
| (main % u= origin/main) | (main %|u= origin/main) |
| (main % u+1) | (main %|u+1) |
| (main % u+1 origin/main) | (main %|u+1 origin/main) |
| (main|SPARSE u=) | (main|SPARSE|u=) |
| (main|SPARSE u= origin/main) | (main|SPARSE|u= origin/main) |
| (main|SPARSE u+1) | (main|SPARSE|u+1) |
| (main|SPARSE u+1 origin/main) | (main|SPARSE|u+1 origin/main) |
| (main %|SPARSE u=) | (main %|SPARSE|u=) |
| (main %|SPARSE u= origin/main) | (main %|SPARSE|u= origin/main) |
| (main %|SPARSE u+1) | (main %|SPARSE|u+1) |
| (main %|SPARSE u+1 origin/main) | (main %|SPARSE|u+1 origin/main) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in a8cc594333 (hooks: fix an obscure TOCTOU "did we
just run a hook?" race, 2022-03-07): The "invoked_hook" variable
passed to run_commit_hook() wasn't passed forward to run_hooks_opt(),
as push_to_checkout() in that commit correctly did.
Whether we ran the code contingent on having run the hook or not was
thus undefined, but in practice on most (all?) modern platforms we'd
have run it (almost?) all the time, since stack variables will get
initialized to some random value, which most of the time isn't "0".
This bug was revealed by running e.g. "t5537-fetch-shallow.sh" with
the --valgrind option. Unfortunately running the whole test suite with
--valgrind is really slow, so we didn't have a CI job that spotted
this. The --valgrind output was:
==31275== Conditional jump or move depends on uninitialised value(s)
==31275== at 0x43C63F: prepare_to_commit (commit.c:1058)
==31275== by 0x4396A5: cmd_commit (commit.c:1722)
==31275== by 0x407C8A: run_builtin (git.c:465)
==31275== by 0x406741: handle_builtin (git.c:718)
==31275== by 0x407665: run_argv (git.c:785)
==31275== by 0x406500: cmd_main (git.c:916)
==31275== by 0x510839: main (common-main.c:56)
==31275== Uninitialised value was created by a stack allocation
==31275== at 0x43B344: prepare_to_commit (commit.c:719)
Reported-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The single-key interactive operation used by "git add -p" has been
made more robust.
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
Test fixes.
* sm/no-git-in-upstream-of-pipe-in-tests:
t0030-t0050: avoid pipes with Git on LHS
t0001-t0028: avoid pipes with Git on LHS
t0003: avoid pipes with Git on LHS
Change the use of a non-existing variable added in my
0b6d0bc924 (Makefiles: add and use wildcard "mkdir -p" template,
2022-03-03) to use the hardcoded whitespace padding for "QUIET" rules
instead. The wspfx_SQ was left from an earlier (rebased out) commit
preceding 0b6d0bc9246[1].
1. https://lore.kernel.org/git/patch-v4-8.9-3733b0c8df1-20220302T124320Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase A B" where B is not a commit should behave as if the
HEAD got detached at B and then the detached HEAD got rebased on top
of A. A bug however overwrites the current branch to point at B,
when B is a descendant of A (i.e. the rebase ends up being a
fast-forward). See [1] for the original bug report.
The callstack from checkout_up_to_date() is the following:
cmd_rebase()
-> checkout_up_to_date()
-> reset_head()
-> update_refs()
-> update_ref()
When B is not a valid branch but an oid, rebase sets the head_name
of rebase_options to NULL. This value gets passed down this call
chain through the branch member of reset_head_opts also getting set
to NULL all the way to update_refs().
Then update_refs() checks ropts.branch to decide whether or not to switch
branches. If ropts.branch is NULL, it calls update_ref() to update HEAD.
At this point however, from rebase's point of view, we want a detached
HEAD. But, since checkout_up_to_date() does not set the RESET_HEAD_DETACH
flag, the update_ref() call will deference HEAD and update the branch its
pointing to. We want the HEAD detached at B instead.
Fix this bug by adding the RESET_HEAD_DETACH flag in
checkout_up_to_date if B is not a valid branch, so that once
reset_head() calls update_refs(), it calls update_ref() with
REF_NO_DEREF which updates HEAD directly intead of deferencing it
and updating the branch that HEAD points to.
Also add a test to ensure the correct behavior.
[1] https://lore.kernel.org/git/YiokTm3GxIZQQUow@newk/
Reported-by: Michael McClimon <michael@mcclimon.org>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the next commit that will test rebase with oids instead
of branch names, update the rebase setup test to add a couple of tags we
can use. This uses the test_commit helper so we can replace some lines
that add a commit manually.
Setting logAllRefUpdates is not necessary because it's on by default for
repositories with a working tree.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
