"git send-email --in-reply-to=<msg>" did not use the In-Reply-To:
header with the value given from the command line, and let it be
overridden by the value on In-Reply-To: header in the messages
being sent out (if exists).
* ra/send-email-in-reply-to-from-command-line-wins:
send-email: restore --in-reply-to superseding behavior
The command line completion support (in contrib/) used to be
prepared to work with "set -u" but recent changes got a bit more
sloppy. This has been corrected.
* vs/completion-with-set-u:
completion: nounset mode fixes
We don't give a "::" for the list separator, but just a single ":". This
ends up rendering literally, "--apply: Use applying strategies ...". As
a follow-on error, the list continuation, "+", also ends up rendering
literally (because we don't have a list).
This was introduced in 52eb738d6b ("rebase: add an --am option",
2020-02-15) and survived the rename in 10cdb9f38a ("rebase: rename the
two primary rebase backends", 2020-02-15).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
76ffbca71a (commit-graph: write Bloom filters to commit graph file,
2020-04-06) added two delayed progress lines to writing the Bloom
filter index and data chunk. This is wrong, because a single common
progress is used while writing all chunks, which is not updated while
writing these two new chunks, resulting in incomplete-looking "done"
lines:
Expanding reachable commits in commit graph: 888679, done.
Computing commit changed paths Bloom filters: 100% (888678/888678), done.
Writing out commit graph in 6 passes: 66% (3554712/5332068), done.
Use the common 'struct progress' instance while writing the Bloom
filter chunks as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display a progress line while iterating over all refs,
d335ce8f24 (commit-graph.c: show progress of finding reachable
commits, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around a
for_each_ref() invocation. Alas, the stop_progress() call ended up at
the wrong place, after write_commit_graph(), which does all the
commit-graph computation and writing, and has several progress lines
of its own. Consequently, that new
Collecting referenced commits: 123
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
Expanding reachable commits in commit graph: 344786, done.
Computing commit changed paths Bloom filters: 100% (344786/344786), done.
Collecting referenced commits: 154, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (data.progress)' condition
protecting the stop_progress() call, because that function is prepared
to handle a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 11179eb311 ("entry.c: check if file exists after checkout",
2017-10-05) we started checking the result of the lstat() call done
after writing a file, to avoid writing garbage to the corresponding
cache entry. However, the code skips calling lstat() if it's possible
to use fstat() when it still has the file descriptor open. And when
calling fstat() we don't do the same error checking. To fix that, let
the callers of fstat_output() know when fstat() fails. In this case,
write_entry() will try to use lstat() and properly report an error if
that fails as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git log` synopsis mentions `<revision range>`, and the description
of this option links to gitrevisions(7), but a nice explanation of
how a revision range can be constructed from individual commits,
optionnally prefixed with `^`, also exists in `rev-list-description.txt`.
Include this description in the man page for `git log`.
Add Asciidoc 'ifdef's to `rev-list-description.txt` so that either `git
rev-list` or `git log` appears in the respective man pages.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A following commit will reuse the description of the `git rev-list`
command in the `git log` manpage.
Move this description to a separate file.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak a sentence to make it a little more readable.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using '{caret}' inside double quotes and immediately following with a
single quoted word does not create the desired output: '<commit1>'
appears verbatim instead of being emphasized.
Use a litteral caret ('^') instead.
Also, remove the leading tabs in shell examples to bring them more in
line with the rest of the documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Specifying ranges" section does not mention explicitly that
several commits can be specified to form a range.
Add a mention to that effect.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add links to the documentation for `git rev-list` and `git diff`
instead of simply mentioning them, to make it easier for readers to reach
these documentation pages. Let's link to `git diff` as this is the
porcelain command, and the rest of the family (`diff-index`, `diff-tree` and
`diff-files`) are mentioned in the "Raw output format" section of the
`git diff` documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In symdiff_prepare(), we iterate over the set of parsed objects to pick
out any symmetric differences, including the left, right, and base
elements. We assign the results into pointers in a "struct symdiff", and
then complain if we didn't find a base, like so:
sym->left = rev->pending.objects[lpos].name;
sym->right = rev->pending.objects[rpos].name;
sym->base = rev->pending.objects[basepos].name;
if (basecount == 0)
die(_("%s...%s: no merge base"), sym->left, sym->right);
But the least lines are backwards. If basecount is 0, then basepos will
be -1, and we will access memory outside of the pending array. This
isn't usually that big a deal, since we don't do anything besides a
single pointer-sized read before exiting anyway, but it does violate the
C standard, and of course memory-checking tools like ASan complain.
Let's put the basecount check first. Note that we haveto split it from
the other assignments, since the die() relies on sym->left and
sym->right having been assigned (this isn't strictly necessary, but is
easier to read than dereferencing the pending array again).
Reported-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first two commits created in t6000 are done without test_tick,
meaning they use the current system clock. After that, we create one
with test_tick, which means it uses a deterministic time in the past.
The result of the "symleft flag bit is propagated down from tag" test
relies on the output order of commits from git-log, which in turn
depends on these timestamps. So this test is technically dependent on
the system clock time, though in practice it would only matter if your
system clock was set before test_tick's default time (which is in 2005).
However, let's use test_tick consistently for those early commits (and
update the expected output to match). This makes the test deterministic,
which is in turn easier to reason about and debug.
Note that there's also a fourth commit here, and it does not use
test_tick. It does have a deterministic timestamp because of the prior
use of test_tick in the script, but it will always be the same time as
the third commit. Let's use test_tick here, too, for consistency. The
matching timestamps between the third and fourth commit are not an
important part of the test.
We could also use test_commit in all of these cases, as it runs
test_tick under the hood. But it would be awkward to do so, as these
tests diverge from the usual test_commit patterns (e.g., by creating
multiple files in a single commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous commits, we removed the usage of test_must_fail() for most
commands except for a set of pre-approved commands. Since that's done,
only allow test_must_fail() to run those pre-approved commands.
Obviously, we should allow `git`.
We allow `__git*` as some completion functions return an error code that
comes from a git invocation. It's good to avoid using test_must_fail
unnecessarily but it wouldn't hurt to err on the side of caution when
we're potentially wrapping a git command (like in these cases).
We also allow `test-tool` and `test-svn-fe` because these are helper
commands that are written by us and we want to catch their failure.
Finally, we allow `test_terminal` because `test_terminal` just wraps
around git commands. Also, we cannot rewrite
`test_must_fail test_terminal` as `test_terminal test_must_fail` because
test_must_fail() is a shell function and as a result, it cannot be
invoked from the test-terminal Perl script.
We opted to explicitly list the above tools instead of using a catch-all
such as `test[-_]*` because we want to be as restrictive as possible so
that in the future, someone would not accidentally introduce an
unrelated usage of test_must_fail() on an "unapproved" command.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are using `test_must_fail cvs` to test that the cvs command fails as
expected. However, test_must_fail() is used to ensure that commands fail
in an expected way, not due to something like a segv. Since we are not
in the business of verifying the sanity of the external world, replace
`test_must_fail cvs` with `! cvs` and assume that the cvs command does
not die unexpectedly.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are running an alias to an external command, we want to wait for
that process to exit even after receiving ^C which normally kills the
git process. This is useful when the process is ignoring SIGINT (which
e.g. pagers often do), and then we don't want it to be killed.
Having an alias which invokes a pager is probably not common, but it can
be useful e.g. if you have an alias to a git command which uses a
subshell as one of the arguments (in which case you have to use an
external command, not an alias to a builtin).
This patch is similar to the previous commit, but the previous commit
fixed this only for aliases to builtins, while this commit does the same
for aliases to external commands. In addition to waiting after clean
like the previous commit, this also enables cleaning the child (that was
already enabled for aliases to builtins before the previous commit),
because wait_after_clean relies on it. Lastly, while the previous commit
fixed a regression, I don't think this has ever worked properly.
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you hit ^C all the processes in the tree receives it. When a git
command uses a pager, git ignores this and waits until the pager quits.
However, when using an alias there is an additional process in the tree
which didn't ignore the signal. That caused it to exit which in turn
caused the pager to exit. This fixes that for aliases to builtins.
This was originally fixed in 46df6906 (execv_dashed_external: wait
for child on signal death, 2017-01-06), but was broken by ee4512ed
(trace2: create new combined trace facility, 2019-02-22) and then
b9140840 (git: avoid calling aliased builtins via their dashed form,
2019-07-29).
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_must_fail() family of functions (including test_might_fail())
should only be used on git commands. Replace test_might_fail() with
a compound command wrapping the old p4 invocation that always returns 0.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had a `test_must_fail verify_expect`. However, the git command in
verify_expect() was not expected to fail; the test_cmp() was the failing
command. Be more precise about testing failure by accepting an optional
first argument of '!' which causes the result of the file comparison to
be negated.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we plan on only allowing `test_might_fail` to work on a
restricted subset of commands, including `git`. Reorder the commands so
that `run_with_limited_open_files` comes before `test_might_fail`. This
way, `test_might_fail` operates on a git command.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch, we plan on making the test_must_fail()-family of
functions accept only git commands. Even though force_color() wraps an
invocation of `env git`, test_must_fail() will not be able to figure
this out since it will assume that force_color() is just some random
function which is disallowed.
Instead of using `env` in force_color() (which does not support shell
functions), export the environment variables in a subshell. Write the
invocation as `force_color test_must_fail git ...` since shell functions
are now supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to avoid using test_must_fail on non-git command continues.
* dl/test-must-fail-fixes-5:
lib-submodule-update: pass 'test_must_fail' as an argument
lib-submodule-update: prepend "git" to $command
lib-submodule-update: consolidate --recurse-submodules
lib-submodule-update: add space after function name
"git fast-export --anonymize" learned to take customized mapping to
allow its users to tweak its output more usable for debugging.
* jk/fast-export-anonym-alt:
fast-export: use local array to store anonymized oid
fast-export: anonymize "master" refname
fast-export: allow seeding the anonymized mapping
fast-export: add a "data" callback parameter to anonymize_str()
fast-export: move global "idents" anonymize hashmap into function
fast-export: use a flex array to store anonymized entries
fast-export: stop storing lengths in anonymized hashmaps
fast-export: tighten anonymize_mem() interface to handle only strings
fast-export: store anonymized oids as hex strings
fast-export: use xmemdupz() for anonymizing oids
t9351: derive anonymized tree checks from original repo
"git difftool" has trouble dealing with paths added to the index
with the intent-to-add bit.
* js/diff-files-i-t-a-fix-for-difftool:
difftool -d: ensure that intent-to-add files are handled correctly
diff-files --raw: show correct post-image of intent-to-add files
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
The code to push changes over "dumb" HTTP had a bad interaction
with the commit reachability code due to incorrect allocation of
object flag bits, which has been corrected.
* bc/http-push-flagsfix:
http-push: ensure unforced pushes fail when data would be lost
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
Add "git prune" to the completion (in contrib/), which could be
typed by end-users from the command line.
* jl/complete-git-prune:
bash-completion: add git-prune into bash completion
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
CVS/SVN interface have been prepared for SHA-256 transition
* bc/sha-256-cvs-svn-updates:
git-cvsexportcommit: port to SHA-256
git-cvsimport: port to SHA-256
git-cvsserver: port to SHA-256
git-svn: set the OID length based on hash algorithm
perl: make SVN code hash independent
perl: make Git::IndexInfo work with SHA-256
perl: create and switch variables for hash constants
t/lib-git-svn: make hash size independent
t9101: make hash independent
t9104: make hash size independent
t9100: make test work with SHA-256
t9108: make test hash independent
t9168: make test hash independent
t9109: make test hash independent
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
"git status" learned to report the status of sparse checkout.
* en/sparse-status:
git-prompt: include sparsity state as well
git-prompt: document how in-progress operations affect the prompt
wt-status: show sparse checkout status as well
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
If one of the options --before, --min-age or --until is given,
limit_list() filters out younger commits early on. Line-log needs all
those commits to trace the movement of line ranges, though. Skip this
optimization if both are used together.
Reported-by: Мария Долгополова <dolgopolovamariia@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/git-for-windows/git/issues/2677, a `git difftool
-d` problem was reported. The underlying cause was a bug in `git
diff-files --raw` that we just fixed: it reported intent-to-add files
with the empty _tree_ as the post-image OID, when we need to show
an all-zero (or, "null") OID instead, to indicate to the caller that
they have to look at the worktree file.
The symptom of that problem shown by `git difftool` was this:
error: unable to read sha1 file of <path> (<empty-tree-OID>)
error: could not write '<filename>'
Make sure that the reported `difftool` problem stays fixed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documented behavior of `git diff-files --raw` is to display
[...] 0{40} if creation, unmerged or "look at work tree".
on the right hand (i.e. postimage) side. This happens for files that
have unstaged modifications, and for files that are unmodified but
stat-dirty.
For intent-to-add files, we used to show the empty blob's hash instead.
In c26022ea8f (diff: convert diff_addremove to struct object_id,
2017-05-30), we made that worse by inadvertently changing that to the
hash of the empty tree.
Let's make the behavior consistent with files that have unstaged
modifications (which applies to intent-to-add files, too) by showing
all-zero values also for intent-to-add files.
Accordingly, this patch adjusts the expectations set by the regression
test introduced in feea6946a5 (diff-files: treat "i-t-a" files as
"not-in-index", 2020-06-20).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email --in-reply-to= fails to override In-Reply-To email headers,
if they're present in the output of format-patch, even when explicitly
told to do so by the option --no-thread, which breaks the contract of the
command line switch option, per its man page.
"
--in-reply-to=<identifier>
Make the first mail (or all the mails with --no-thread) appear as
a reply to the given Message-Id, which avoids breaking threads to
provide a new patch series.
"
This patch fixes the aformentioned issue, by bringing --in-reply-to's old
overriding behavior back.
The test was donated by Carlo Marcelo Arenas Belón.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
