There was a discussion of problematic directory/file conflicts with
virtual merge bases on the mailing list years ago at
https://public-inbox.org/git/AANLkTimwUQafGDrjxWrfU9uY1uKoFLJhxYs=vssOPqdf@mail.gmail.com/
Part of these corresponding tests made it into this testsuite. However,
the more problematic one didn't. And there are others that showcase the
problems even more. Add a very lengthy explanation, some of it from that
email, describing the tradeoffs in picking a recursive merge-base when
you're dealing with an add/add directory/file conflict.
The solution picked years ago is relatively good, but there is the
potential to do even better, assuming we're willing to pay a certain
performance cost.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to use backslash continuation, as the "&&"
already provides continuation (and happily soaks up empty
lines between commands).
We can also expand the multi-line printf into a
here-document, which lets us use line breaks more naturally
(and avoids another continuation that required us to break
the natural indentation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When for-each-ref is used with --ignore-case, we expect
match_name_as_path() to do a case-insensitive match. But
there's an extra layer of filtering that happens before we
even get there. Since commit cfe004a5a9 (ref-filter: limit
traversal to prefix, 2017-05-22), we feed the prefix to the
ref backend so that it can optimize the ref iteration.
There's no mechanism for us to tell the backend we're matching
case-insensitively. Nor is there likely to be one anytime soon,
since the packed backend relies on binary-searching the sorted list
of refs. Let's just punt on this case. The extra filtering is an
optimization that we simply can't do. We'll still give the correct
answer via the filtering in match_name_as_path().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignore-case option was added by 3bb16a8bf2 (tag,
branch, for-each-ref: add --ignore-case for sorting and
filtering, 2016-12-04), but it was never tested. And indeed,
it does not work due to multiple bugs (which will be fixed
in subsequent patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each rename is a lego: the source side could be connected to a delete or
another rename, and the destination side could be connected to a rename or a
conflicting add. Previous tests combined these to get e.g.
rename/rename(1to2)/add/add, rename/rename(2to1)/delete/delete, and
rename/add/delete. But we can also build bigger chains of conflicts. Add a
testcase demonstrating this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If either side of a rename/rename(2to1) conflict is itself also involved
in a rename/delete conflict, then the conflict is a little more complex;
we can even have what I'd call a rename/rename(2to1)/delete/delete
conflict. (In some ways, this is similar to a rename/rename(1to2)/add/add
conflict, as added in commit 3672c97148 ("merge-recursive: Fix working
copy handling for rename/rename/add/add", 2011-08-11)). Add a testcase
for such a conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is renamed on one side of history, and the other side of history
both deletes the original file and adds a new unrelated file in the way of
the rename, then we have what I call a rename/add/delete conflict. Add a
testcase covering this scenario.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6044 has lots of tests for verifying that merge will abort as expected
when there are changes staged before the merge starts. However, it only
checked for non-zero exit code, which could mean that the merge ran to
completion with conflicts. Check that the merge was actually correctly
aborted, i.e. that .git/MERGE_HEAD is not present.
This changes one of the tests from expect_success to expect_failure.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test employs a for-loop inside a subshell and correctly aborts the
loop and fails the test overall (via "exit 1") if any iteration of the
for-loop fails. Otherwise, it exits the subshell with an explicit but
entirely unnecessary "exit 0", presumably to indicate that all
iterations of the loop succeeded. The &&-chain is broken between the
for-loop and the "exit 0". Rather than fixing the &&-chain, just drop
the pointless "exit 0".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests reference non-existent object "c" when they really mean to
be referencing "C", however, these errors went unnoticed due to a broken
&&-chain later in the tests. Fix these errors, as well as the broken
&&-chains behind which they hid.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses a subshell within a subshell but is formatted in such a
way as to suggests that the inner subshell is a sibling rather than a
child, which makes it difficult to digest the test's structure and
intent.
Worse, the inner subshell performs cleanup of actions from earlier in
the test, however, a failure between the initial actions and the cleanup
will prevent the cleanup from taking place.
Fix these problems by modernizing and simplifying the test and by using
test_when_finished() for the cleanup action.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of write_script() to abstract-away details of shell
script creation, thus allowing the reader to focus on script content.
Readability benefits, particularly in this case, since the script body
was buried in a noisy one-liner subshell responsible for emitting
boilerplate and body.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test expects "git push" to fail, thus it manually inverts that
local expected failure into a successful exit code for the test overall.
In doing so, it intentionally breaks the &&-chain. Modernize by
replacing manual exit code management with test_must_fail() and a normal
&&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test has been dysfunctional since it was added by 259f3ee296
(lib-submodule-update.sh: define tests for recursing into submodules,
2017-03-14), however, the problem went unnoticed due to a broken
&&-chain.
The test wants to verify that replacing a submodule containing a .git
directory will absorb the .git directory into the .git/modules/ of the
superproject, and then replace the working tree content appropriate to
the superproject. It is, therefore, incorrect to check if the
submodule content still exists since the submodule will have been
replaced by the content of the superproject.
Fix this by removing the submodule content check, which also happens
to be the line that broke the &&-chain.
While at it, fix broken &&-chains in a couple neighboring tests.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests intentionally break the &&-chain after using 'unset' since
they don't know if 'unset' will succeed or fail and don't want a local
'unset' failure to fail the test overall. We can do better by using
sane_unset(), which can be linked into the &&-chain as usual.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests employ a noisy subshell (with missing &&-chain) to feed
input into Git commands or files:
(echo a; echo b; echo c) | git some-command ...
Simplify by taking advantage of test_write_lines():
test_write_lines a b c | git some-command ...
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests manually coerce the exit code of invoked commands to
"success" when they don't care if the command succeeds or fails since
failure of those commands should not cause the test to fail overall.
In doing so, they intentionally break the &&-chain. Modernize by
replacing manual exit code management with test_might_fail() and a
normal &&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there's a parsing error we'll already report it via the
usual fsck report() function (or not, if the user has asked
to skip this object or warning type). The error message from
the config parser just adds confusion. Let's suppress it.
Note that we didn't test this case at all, so I've added
coverage in t7415. We may end up toning down or removing
this fsck check in the future. So take this test as checking
what happens now with a focus on stderr, and not any
ironclad guarantee that we must detect and report parse
failures in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 8 in t5407 appears to be an accidental exact duplicate of of test 5;
the testcode is identical and has identical repo state, but the test
description is different and suggests that rebase -m followed by rebase
--skip was what was actually supposed to be tested. Modify the test to
include the -m option.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to try seeing if a fetch is necessary in a submodule
during a fetch with --recurse-submodules got confused when the path
to the submodule was changed in the range of commits in the
superproject, sometimes showing "(null)". This has been corrected.
* sb/fix-fetching-moved-submodules:
t5526: test recursive submodules when fetching moved submodules
submodule: fix NULL correctness in renamed broken submodules
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
* pw/add-p-recount:
add -p: fix counting empty context lines in edited patches
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
The recent addition of "partial clone" experimental feature kicked
in when it shouldn't, namely, when there is no partial-clone filter
defined even if extensions.partialclone is set.
* jh/partial-clone:
list-objects: check if filter is NULL before using
Some flaky tests have been fixed.
* sg/gpg-tests-fix:
tests: make forging GPG signed commits and tags more robust
t7510-signed-commit: use 'test_must_fail'
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to check the behavior of fetching from a repository which
changes between rounds of negotiation (for example, when different
servers in a load-balancing agreement participate in the same stateless
RPC negotiation). This forms a baseline of comparison to the ref-in-want
functionality (which will be introduced to the client in subsequent
commits), and ensures that subsequent commits do not change existing
behavior.
As part of this effort, a mechanism to substitute strings in a single
HTTP response is added.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase.sh wrote strategy options to .git/rebase/merge/strategy_opts
in the following format:
'--ours' '--renormalize'
Note the double spaces.
git-rebase--interactive uses sequencer.c to parse that file, and
sequencer.c used split_cmdline() to get the individual strategy options.
After splitting, sequencer.c prefixed each "option" with a double dash,
so, concatenating all its options would result in:
-- --ours -- --renormalize
So, when it ended up calling try_merge_strategy(), that in turn would run
git merge-$strategy -- --ours -- --renormalize $merge_base -- $head $remote
instead of the expected/desired
git merge-$strategy --ours --renormalize $merge_base -- $head $remote
Remove the extra spaces so that when it goes through split_cmdline() we end
up with the desired command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are not passing the same args to merge strategies when we are doing an
--interactive rebase as we do with a --merge rebase. The merge strategy
should not need to be aware of which type of rebase is in effect. Add a
testcase which checks for the appropriate args.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase backends currently behave differently with empty commit messages,
largely as a side-effect of the different underlying commands on which
they are based. am-based rebases apply commits with an empty commit
message without stopping or requiring the user to specify an extra flag.
(It is interesting to note that am-based rebases are the default rebase
type, and no one has ever requested a --no-allow-empty-message flag to
change this behavior.) merge-based and interactive-based rebases (which
are ultimately based on git-commit), will currently halt on any such
commits and require the user to manually specify what to do with the
commit and continue.
One possible rationale for the difference in behavior is that the purpose
of an "am" based rebase is solely to transplant an existing history, while
an "interactive" rebase is one whose purpose is to polish a series before
making it publishable. Thus, stopping and asking for confirmation for a
possible problem is more appropriate in the latter case. However, there
are two problems with this rationale:
1) merge-based rebases are also non-interactive and there are multiple
types of rebases that use the interactive machinery but are not
explicitly interactive (e.g. when either --rebase-merges or
--keep-empty are specified without --interactive). These rebases are
also used solely to transplant an existing history, and thus also
should default to --allow-empty-message.
2) this rationale only says that the user is more accepting of stopping
in the case of an explicitly interactive rebase, not that stopping
for this particular reason actually makes sense. Exploring whether
it makes sense, requires backing up and analyzing the underlying
commands...
If git-commit did not error out on empty commits by default, accidental
creation of commits with empty messages would be a very common occurrence
(this check has caught me many times). Further, nearly all such empty
commit messages would be considered an accidental error (as evidenced by a
huge amount of documentation across version control systems and in various
blog posts explaining how important commit messages are). A simple check
for what would otherwise be a common error thus made a lot of sense, and
git-commit gained an --allow-empty-message flag for special case
overrides. This has made commits with empty messages very rare.
There are two sources for commits with empty messages for rebase (and
cherry-pick): (a) commits created in git where the user previously
specified --allow-empty-message to git-commit, and (b) commits imported
into git from other version control systems. In case (a), the user has
already explicitly specified that there is something special about this
commit that makes them not want to specify a commit message; forcing them
to re-specify with every cherry-pick or rebase seems more likely to be
infuriating than helpful. In case (b), the commit is highly unlikely to
have been authored by the person who has imported the history and is doing
the rebase or cherry-pick, and thus the user is unlikely to be the
appropriate person to write a commit message for it. Stopping and
expecting the user to modify the commit before proceeding thus seems
counter-productive.
Further, note that while empty commit messages was a common error case for
git-commit to deal with, it is a rare case for rebase (or cherry-pick).
The fact that it is rare raises the question of why it would be worth
checking and stopping on this particular condition and not others. For
example, why doesn't an interactive rebase automatically stop if the
commit message's first line is 2000 columns long, or is missing a blank
line after the first line, or has every line indented with five spaces, or
any number of other myriad problems?
Finally, note that if a user doing an interactive rebase does have the
necessary knowledge to add a message for any such commit and wants to do
so, it is rather simple for them to change the appropriate line from
'pick' to 'reword'. The fact that the subject is empty in the todo list
that the user edits should even serve as a way to notify them.
As far as I can tell, the fact that merge-based and interactive-based
rebases stop on commits with empty commit messages is solely a by-product
of having been based on git-commit. It went without notice for a long
time precisely because such cases are rare. The rareness of this
situation made it difficult to reason about, so when folks did eventually
notice this behavior, they assumed it was there for a good reason and just
added an --allow-empty-message flag. In my opinion, stopping on such
messages not desirable in any of these cases, even the (explicitly)
interactive case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a simple directory rename testcase, in conjunction with each of the
types of rebases:
git-rebase--interactive
git-rebase--am
git-rebase--merge
and also use the same testcase for
git am --3way
This demonstrates a difference in behavior between the different rebase
backends in regards to directory rename detection.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase has three different types: am, merge, and interactive, all of
which are implemented in terms of separate scripts. am builds on git-am,
merge builds on git-merge-recursive, and interactive builds on
git-cherry-pick. We make use of features in those lower-level commands in
the different rebase types, but those features don't exist in all of the
lower level commands so we have a range of incompatibilities. Previously,
we just accepted nearly any argument and silently ignored whichever ones
weren't implemented for the type of rebase specified. Change this so the
incompatibilities are documented, included in the testsuite, and tested
for at runtime with an appropriate error message shown.
Some exceptions I left out:
* --merge and --interactive are technically incompatible since they are
supposed to run different underlying scripts, but with a few small
changes, --interactive can do everything that --merge can. In fact,
I'll shortly be sending another patch to remove git-rebase--merge and
reimplement it on top of git-rebase--interactive.
* One could argue that --interactive and --quiet are incompatible since
--interactive doesn't implement a --quiet mode (perhaps since
cherry-pick itself does not implement one). However, the interactive
mode is more quiet than the other modes in general with progress
messages, so one could argue that it's already quiet.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase is split into three types: am, merge, and interactive. Various
options imply different types, and which mode we are using determine which
sub-script (git-rebase--$type) is executed to finish the work. Not all
options work with all types, so add tests for combinations where we expect
to receive an error rather than having options be silently ignored.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing commit-graph files, it can be convenient to ask for all
reachable commits (starting at the ref set) in the resulting file. This
is particularly helpful when writing to stdin is complicated, such as a
future integration with 'git gc'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.commitGraph is true, verify the contents of the commit-graph
during 'git fsck' using the 'git commit-graph verify' subcommand. Run
this check on all alternates, as well.
We use a new process for two reasons:
1. The subcommand decouples the details of loading and verifying a
commit-graph file from the other fsck details.
2. The commit-graph verification requires the commits to be loaded
in a specific order to guarantee we parse from the commit-graph
file for some objects and from the object database for others.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file ends with a SHA1 hash of the previous contents. If
a commit-graph file has errors but the checksum hash is correct, then we
know that the problem is a bug in Git and not simply file corruption
after-the-fact.
Compute the checksum right away so it is the first error that appears,
and make the message translatable since this error can be "corrected" by
a user by simply deleting the file and recomputing. The rest of the
errors are useful only to developers.
Be sure to continue checking the rest of the file data if the checksum
is wrong. This is important for our tests, as we break the checksum as
we modify bytes of the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file has an extra chunk to store the parent int-ids for
parents beyond the first parent for octopus merges. Our test repo has a
single octopus merge that we can manipulate to demonstrate the 'verify'
subcommand detects incorrect values in that chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While iterating through the commit parents, perform the generation
number calculation and compare against the value stored in the
commit-graph.
The tests demonstrate that having a different set of parents affects
the generation number calculation, and this value propagates to
descendants. Hence, we drop the single-line condition on the output.
Since Git will ship with the commit-graph feature without generation
numbers, we need to accept commit-graphs with all generation numbers
equal to zero. In this case, ignore the generation number calculation.
However, verify that we should never have a mix of zero and non-zero
generation numbers. Create a test that sets one commit to generation
zero and all following commits report a failure as they have non-zero
generation in a file that contains generation number zero.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file stores parents in a two-column portion of the
commit data chunk. If there is only one parent, then the second column
stores 0xFFFFFFFF to indicate no second parent.
The 'verify' subcommand checks the parent list for the commit loaded
from the commit-graph and the one parsed from the object database. Test
these checks for corrupt parents, too many parents, and wrong parents.
Add a boundary check to insert_parent_or_die() for when the parent
position value is out of range.
The octopus merge will be tested in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'verify' subcommand must compare the commit content parsed from the
commit-graph against the content in the object database. Use
lookup_commit() and parse_commit_in_graph_one() to parse the commits
from the graph and compare against a commit that is loaded separately
and parsed directly from the object database.
Add checks for the root tree OID.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'verify' subcommand, load commits directly from the object
database to ensure they exist. Parse by skipping the commit-graph.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the commit-graph file, the OID fanout chunk provides an index into
the OID lookup. The 'verify' subcommand should find incorrect values
in the fanout.
Similarly, the 'verify' subcommand should find out-of-order values in
the OID lookup.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file requires the following three chunks:
* OID Fanout
* OID Lookup
* Commit Data
If any of these are missing, then the 'verify' subcommand should
report a failure. This includes the chunk IDs malformed or the
chunk count is truncated.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the first of several commits that add a test to check that
'git commit-graph verify' catches corruption in the commit-graph
file. The first test checks that the command catches an error in
the file signature. This is a check that exists in the existing
commit-graph reading code.
Add a helper method 'corrupt_graph_and_verify' to the test script
t5318-commit-graph.sh. This helper corrupts the commit-graph file
at a certain location, runs 'git commit-graph verify', and reports
the output to the 'err' file. This data is filtered to remove the
lines added by 'test_must_fail' when the test is run verbosely.
Then, the output is checked to contain a specific error message.
Most messages from 'git commit-graph verify' will not be marked
for translation. There will be one exception: the message that
reports an invalid checksum will be marked for translation, as that
is the only message that is intended for a typical user.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit-graph file becomes corrupt, we need a way to verify
that its contents match the object database. In the manner of
'git fsck' we will implement a 'git commit-graph verify' subcommand
to report all issues with the file.
Add the 'verify' subcommand to the 'commit-graph' builtin and its
documentation. The subcommand is currently a no-op except for
loading the commit-graph into memory, which may trigger run-time
errors that would be caught by normal use. Add a simple test that
ensures the command returns a zero error code.
If no commit-graph file exists, this is an acceptable state. Do
not report any errors.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph tests should be checking that normal Git operations
succeed and have matching output with and without the commit-graph
feature enabled. However, the test was toggling 'core.graph' instead
of the correct 'core.commitGraph' variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commits in state:filter.map have already been processed, so don't
filter them again. This makes incremental git filter-branch much faster.
Also add tests for --state-branch option.
Signed-off-by: Michael Barabanov <michael.barabanov@gmail.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of mucking with filesystem directly, use plumbing commands
update-ref etc. to manipulate the refs in the tests.
* cc/tests-without-assuming-ref-files-backend:
t9104: kosherly remove remote refs
"git fetch --shallow-since=<cutoff>" that specifies the cut-off
point that is newer than the existing history used to end up
grabbing the entire history. Such a request now errors out.
* nd/reject-empty-shallow-request:
upload-pack: reject shallow requests that would return nothing
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
Clean up tests in t6xxx series about 'merge' command.
* en/merge-recursive-tests:
t6036: prefer test_when_finished to manual cleanup in following test
t6036, t6042: prefer test_cmp to sequences of test
t6036, t6042: prefer test_path_is_file, test_path_is_missing
t6036, t6042: use test_line_count instead of wc -l
t6036, t6042: use test_create_repo to keep tests independent
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
When an error occurs in updating the working tree of a submodule in
submodule_move_head, tell the user which submodule the error occurred in.
The call to read-tree contains a super-prefix, such that the read-tree
will correctly report any path related issues, but some error messages
do not contain a path, for example:
~/gerrit$ git checkout --recurse-submodules origin/master
~/gerrit$ fatal: failed to unpack tree object 07672f31880ba80300b38492df9d0acfcd6ee00a
Give the hint which submodule has a problem.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for deprecating "-l", let's make sure we're
using the recommended option ourselves.
This patch just mechanically converts "branch -l" to "branch
--create-reflog". Note that with the exception of the
actual "--create-reflog" test, we could actually remove "-l"
entirely from most of these callers. That's because these
days core.logallrefupdates defaults to true in a non-bare
repository.
I've left them in place, though, since they serve to
document the expectation of the test, even if they are
technically noops.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test checks that the "-l" option creates a reflog. But
in fact we'd create one even without it, since the default
in a non-bare repository is to do so. Let's unset the config
so we can be sure our "-l" option is kicking in.
Note that we can't do this with test_config, since that
would leave the variable unset after our test finishes,
confusing downstream tests (the helper is not not smart
enough to restore the previous value, and just always runs
test_unconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git-grep(1)' a new option, '--column', to show the column
number of the first match on a non-context line. This makes it possible
to teach 'contrib/git-jump/git-jump' how to seek to the first matching
position of a grep match in your editor, and allows similar additional
scripting capabilities.
For example:
$ git grep -n --column foo | head -n3
.clang-format:51:14:# myFunction(foo, bar, baz);
.clang-format:64:7:# int foo();
.clang-format:75:8:# void foo()
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an 'unpack-sideband' subcommand to the test-pkt-line helper to
enable unpacking packet line data sent multiplexed using a sideband.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users specify the commit range with 'Z..C' pattern for format-patch, all
the parents of Z (including Z) would be marked as UNINTERESTING which would
prevent revision walk in prepare_bases from getting the prerequisite commits,
thus `git format-patch --base <base_commit_sha> Z..C` won't be able to generate
the list of prerequisite patch ids. Clear UNINTERESTING flag with
clear_object_flags solves this issue.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since commit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09), when a commit marked as 'reword' in an interactive rebase
has conflicts and fails to apply, when the rebase is resumed that commit
will be squashed into its parent with its commit message taken.
The issue can be understood better by looking at commit 56dc3ab04b
("sequencer (rebase -i): implement the 'edit' command", 2017-01-02), which
introduced error_with_patch() for the edit command. For the edit command,
it needs to stop the rebase whether or not the patch applies cleanly. If
the patch does apply cleanly, then when it resumes it knows it needs to
amend all changes into the previous commit. If it does not apply cleanly,
then the changes should not be amended. Thus, it passes !res (success of
applying the 'edit' commit) to error_with_patch() for the to_amend flag.
The problematic line of code actually came from commit 04efc8b57c
("sequencer (rebase -i): implement the 'reword' command", 2017-01-02).
Note that to get to this point in the code:
* !!res (i.e. patch application failed)
* item->command < TODO_SQUASH
* item->command != TODO_EDIT
* !is_fixup(item->command) [i.e. not squash or fixup]
So that means this can only be a failed patch application that is either a
pick, revert, or reword. We only need to amend HEAD when rewording the
root commit or a commit that has been fast-forwarded, for any of the other
cases we want a new commit, so we should not set the to_amend flag.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Original-patch-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing a reworded root commit, ensure that the squash-onto commit
which is created and amended is still the root commit.
Suggested-by: Phillip Wood <phillip.wood@talktalk.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression to "rebase -i --root" introduced during this cycle has
been fixed.
* js/rebase-i-root-fix:
rebase --root: fix amending root commit messages
rebase --root: demonstrate a bug while amending root commit messages
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
Three tests in 't7406-submodule-update' contain broken &&-chains, but
since they are all in subshells, chain-lint couldn't notice them.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk ewah format tells us how big the ewah data is,
and we blindly read that much from the buffer without
considering whether the mmap'd data is long enough, which
can lead to out-of-bound reads.
Let's make sure we have data available before reading it,
both for the ewah header/footer as well as for the bit data
itself. In particular:
- keep our ptr/len pair in sync as we move through the
buffer, and check it before each read
- check the size for integer overflow (this should be
impossible on 64-bit, as the size is given as a 32-bit
count of 8-byte words, but is possible on a 32-bit
system)
- return the number of bytes read as an ssize_t instead of
an int, again to prevent integer overflow
- compute the return value using a pointer difference;
this should yield the same result as the existing code,
but makes it more obvious that we got our computations
right
The included test is far from comprehensive, as it just
picks a static point at which to truncate the generated
bitmap. But in practice this will hit in the middle of an
ewah and make sure we're at least exercising this code.
Reported-by: Luat Nguyen <root@l4w.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17). The change did not completely remove the command
due to an issue noted in the commit's log message.
So, a test was added to ensure that a command which uses the
'--set-upstream' option fails instead of silently acting as an alias
for the '--set-upstream-to' option due to option parsing features.
To avoid confusion, clarify that the option is disabled intentionally
in the corresponding test description.
The test is expected to be around as long as we intentionally fail
on seeing the '--set-upstream' option which in turn we expect to
do for a period of time after which we can be sure that existing
users of '--set-upstream' are aware that the option is no
longer supported.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests try to make sure Git behaves sensibly in a
read-only directory, by dropping 'w' permission bit before doing a
test and then restoring it after it is done. The latter is needed
for the test framework to clean after itself without leaving a
leftover directory that cannot be removed.
Ancient parts of tests however arrange the above with
chmod a-w . &&
... do the test ...
status=$?
chmod 775 .
(exit $status)
which obviously would not work if the test somehow dies before it
has the chance to do "chmod 775". Rewrite them by following a more
robust pattern recently written tests use, which is
test_when_finished "chmod 775 ." &&
chmod a-w . &&
... do the test ...
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the -L option is used to specify a line range in git log, and the end
of the range is past the end of the file, git will fail with a fatal
error. This commit prevents such behaviour - instead we perform the log
for existing lines within the specified range.
This commit also fixes a corner case where -L ,-n:file would be treated
as a log over the whole file. Now we treat this as -L 1,-n:file and
blame the first line of the file instead.
Signed-off-by: Isabella Stephens <istephens@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the -L option is used to specify a line range in git blame, and the
end of the range is past the end of the file, git will fail with a fatal
error. This commit prevents such behavior - instead we display the blame
for existing lines within the specified range. Tests are amended
accordingly.
This commit also fixes two corner cases. Blaming -L n,-(n+1) now blames
the first n lines of a file rather than from n to the end of the file.
Blaming -L ,-n will be treated as -L 1,-n and blame the first line of
the file, rather than blaming the whole file.
Signed-off-by: Isabella Stephens <istephens@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In negotiation using protocol v2, fetch-pack sometimes does not make
full use of the information obtained in the ref advertisement:
specifically, that if the server advertises a commit that the client
also has, the client never needs to inform the server that it has the
commit's parents, since it can just tell the server that it has the
advertised commit and it knows that the server can and will infer the
rest.
This is because, in do_fetch_pack_v2(), rev_list_insert_ref_oid() is
invoked before mark_complete_and_common_ref(). This means that if we
have a commit that is both our ref and their ref, it would be enqueued
by rev_list_insert_ref_oid() as SEEN, and since it is thus already SEEN,
mark_complete_and_common_ref() would not enqueue it.
If mark_complete_and_common_ref() were invoked first, as it is in
do_fetch_pack() for protocol v0, then mark_complete_and_common_ref()
would enqueue it with COMMON_REF | SEEN. The addition of COMMON_REF
ensures that its parents are not sent as "have" lines.
Change the order in do_fetch_pack_v2() to be consistent with
do_fetch_pack(), and to avoid sending unnecessary "have" lines.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodules work tree is removed, we should unset its core.worktree
setting as the worktree is no longer present. This is not just in line
with the conceptual view of submodules, but it fixes an inconvenience
for looking at submodules that are not checked out:
git clone --recurse-submodules git://github.com/git/git && cd git &&
git checkout --recurse-submodules v2.13.0
git -C .git/modules/sha1collisiondetection log
fatal: cannot chdir to '../../../sha1collisiondetection': \
No such file or directory
With this patch applied, the final call to git log works instead of dying
in its setup, as the checkout will unset the core.worktree setting such
that following log will be run in a bare repository.
This patch covers all commands that are in the unpack machinery, i.e.
checkout, read-tree, reset. A follow up patch will address
"git submodule deinit", which will also make use of the new function
submodule_unset_core_worktree(), which is why we expose it in this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The topic merged in 0c7ecb7c31 (Merge branch 'sb/submodule-move-nested',
2018-05-08) provided support for moving nested submodules.
Remove the NEEDSWORK comment and implement the nested submodules test as
the comment hinted at.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"index-pack --strict" has been taught to make sure that it runs the
final object integrity checks after making the freshly indexed
packfile available to itself.
* jk/index-pack-maint:
index-pack: correct install_packed_git() args
index-pack: handle --strict checks of non-repo packs
prepare_commit_graft: treat non-repository as a noop
Finishing touches to a topic that already is in 'maint'.
* jk/submodule-fsck-loose-fixup:
fsck: avoid looking at NULL blob->object
t7415: don't bother creating commit for symlink test
Fetch-pack --all became broken with respect to unusual tags in
5f0fc64513 (fetch-pack: eliminate spurious error messages, 2012-09-09),
and was fixed only recently in e9502c0a7f (fetch-pack: don't try to fetch
peel values with --all, 2018-06-11). However the test added in
e9502c0a7f does not explicitly cover all funky cases.
In order to be sure fetching funky tags will never break, let's
explicitly test all relevant cases with 4 tag objects pointing to 1) a
blob, 2) a tree, 3) a commit, and 4) another tag objects. The referenced
tag objects themselves are referenced from under regular refs/tags/*
namespace. Before e9502c0a7f `fetch-pack --all` was failing e.g. this way:
.../git/t/trash directory.t5500-fetch-pack/fetchall$ git ls-remote ..
44085874... HEAD
...
bc4e9e1f... refs/tags/tag-to-blob
038f48ad... refs/tags/tag-to-blob^{} # peeled
520db1f5... refs/tags/tag-to-tree
7395c100... refs/tags/tag-to-tree^{} # peeled
.../git/t/trash directory.t5500-fetch-pack/fetchall$ git fetch-pack --all ..
fatal: A git upload-pack: not our ref 038f48ad...
fatal: The remote end hung up unexpectedly
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 originally would fetch changes in one query. On large repos this
could fail because of the limits that Perforce imposes on the number of
items returned and the number of queries in the database.
To fix this, git-p4 learned to query changes in blocks of 512 changes,
However, this can be very slow - if you have a few million changes,
with each chunk taking about a second, it can be an hour or so.
Although it's possible to tune this value manually with the
"--changes-block-size" option, it's far from obvious to ordinary users
that this is what needs doing.
This change alters the block size dynamically by looking for the
specific error messages returned from the Perforce server, and reducing
the block size if the error is seen, either to the limit reported by the
server, or to half the current block size.
That means we can start out with a very large block size, and then let
it automatically drop down to a value that works without error, while
still failing correctly if some other error occurs.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when p4 fails to run, git-p4 just crashes with an obscure
error message.
For example, if the P4 ticket has expired, you get:
Error: Cannot locate perforce checkout of <path> in client view
This change checks whether git-p4 can talk to the Perforce server when
the first P4 operation is attempted, and tries to print a meaningful
error message if it fails.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Romain Merland <merlorom@yahoo.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In partial_clone_get_default_filter_spec(), the
core_partial_clone_filter_default variable may be NULL; ensure that it
is not NULL before using it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "fetch-pack --all" sees a tag-to-blob on the remote, it
tries to fetch both the tag itself ("refs/tags/foo") and the
peeled value that the remote advertises ("refs/tags/foo^{}").
Asking for the object pointed to by the latter can cause
upload-pack to complain with "not our ref", since it does
not mark the peeled objects with the OUR_REF (unless they
were at the tip of some other ref).
Arguably upload-pack _should_ be marking those peeled
objects. But it never has in the past, since clients would
generally just ask for the tag and expect to get the peeled
value along with it. And that's how "git fetch" works, as
well as older versions of "fetch-pack --all".
The problem was introduced by 5f0fc64513 (fetch-pack:
eliminate spurious error messages, 2012-09-09). Before then,
the matching logic was something like:
if (refname is ill-formed)
do nothing
else if (doing --all)
always consider it matched
else
look through list of sought refs for a match
That commit wanted to flip the order of the second two arms
of that conditional. But we ended up with:
if (refname is ill-formed)
do nothing
else
look through list of sought refs for a match
if (--all and no match so far)
always consider it matched
That means tha an ill-formed ref will trigger the --all
conditional block, even though we should just be ignoring
it. We can fix that by having a single "else" with all of
the well-formed logic, that checks the sought refs and
"--all" in the correct order.
Reported-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 159e7b080b (fsck: detect gitmodules files,
2018-05-02) taught fsck to look at the content of
.gitmodules files. If the object turns out not to be a blob
at all, we just complain and punt on checking the content.
And since this was such an obvious and trivial code path, I
didn't even bother to add a test.
Except it _does_ do one non-trivial thing, which is call the
report() function, which wants us to pass a pointer to a
"struct object". Which we don't have (we have only a "struct
object_id"). So we erroneously pass a NULL object to
report(), which gets dereferenced and causes a segfault.
It seems like we could refactor report() to just take the
object_id itself. But we pass the object pointer along to
a callback function, and indeed this ends up in
builtin/fsck.c's objreport() which does want to look at
other parts of the object (like the type).
So instead, let's just use lookup_unknown_object() to get
the real "struct object", and pass that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early versions of the fsck .gitmodules detection code
actually required a tree to be at the root of a commit for
it to be checked for .gitmodules. What we ended up with in
159e7b080b (fsck: detect gitmodules files, 2018-05-02),
though, finds a .gitmodules file in _any_ tree (see that
commit for more discussion).
As a result, there's no need to create a commit in our
tests. Let's drop it in the name of simplicity. And since
that was the only thing referencing $tree, we can pull our
tree creation out of a command substitution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands that make use of --git-completion-helper feature could
now produce a lot of --no-xxx options that a command can take. This in
many case could nearly double the amount of completable options, using
more screen estate and also harder to search for the wanted option.
This patch attempts to mitigate that by collapsing extra --no-
options, the ones that are added by --git-completion-helper and not in
original struct option arrays. The "--no-..." option will be displayed
in this case to hint about more options, e.g.
> ~/w/git $ git clone --
--bare --origin=
--branch= --progress
--checkout --quiet
--config= --recurse-submodules
--depth= --reference=
--dissociate --reference-if-able=
--filter= --separate-git-dir=
--hardlinks --shallow-exclude=
--ipv4 --shallow-since=
--ipv6 --shallow-submodules
--jobs= --shared
--local --single-branch
--mirror --tags
--no-... --template=
--no-checkout --upload-pack=
--no-hardlinks --verbose
--no-tags
and when you complete it with --no-<tab>, all negative options will be
presented:
> ~/w/git $ git clone --no-
--no-bare --no-quiet
--no-branch --no-recurse-submodules
--no-checkout --no-reference
--no-config --no-reference-if-able
--no-depth --no-separate-git-dir
--no-dissociate --no-shallow-exclude
--no-filter --no-shallow-since
--no-hardlinks --no-shallow-submodules
--no-ipv4 --no-shared
--no-ipv6 --no-single-branch
--no-jobs --no-tags
--no-local --no-template
--no-mirror --no-upload-pack
--no-origin --no-verbose
--no-progress
Corner case: to make sure that people will never accidentally complete
the fake option "--no-..." there must be one real --no- in the first
complete listing even if it's not from the original struct option.
PS. This could could be made simpler with ";&" to fall through from
"--no-*" block and share the code but ";&" is not available on bash-3
(i.e. Mac)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression introduced in 8462ff43 ("convert_to_git():
safe_crlf/checksafe becomes int conv_flags", 2018-01-13) back in Git
2.17 cycle caused autocrlf rewrites to produce a warning message
despite setting safecrlf=false.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Acked-By: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of test scripts create forged GPG signed commits or tags to
check that such forgery can't fool various git commands' signature
verification. All but one of those test scripts are prone to
occasional failures because the forgery creates a bogus GPG signature,
and git commands error out with an unexpected error message, e.g.
"Commit deadbeef does not have a GPG signature" instead of "... has a
bad GPG signature".
't5573-pull-verify-signatures.sh', 't7510-signed-commit.sh' and
't7612-merge-verify-signatures.sh' create forged signed commits like
this:
git commit -S -m "bad on side" &&
git cat-file commit side-bad >raw &&
sed -e "s/bad/forged bad/" raw >forged &&
git hash-object -w -t commit forged >forged.commit
On rare occasions the given pattern occurs not only in the commit
message but in the GPG signature as well, and after it's replaced in
the signature the resulting signature becomes invalid, GPG will report
CRC error and that it couldn't find any signature, which will then
ultimately cause the test failure.
Since in all three cases the pattern to be replaced during the forgery
is the first word of the commit message's subject line, and since the
GPG signature in the commit object is indented by a space, let's just
anchor those patterns to the beginning of the line to prevent this
issue.
The test script 't7030-verify-tag.sh' creates a forged signed tag
object in a similar way by replacing the pattern "seventh", but the
GPG signature in tag objects is not indented by a space, so the above
solution is not applicable in this case. However, in the tag object
in question the pattern "seventh" occurs not only in the tag message
but in the 'tag' header as well. To create a forged tag object it's
sufficient to replace only one of the two occurences, so modify the
sed script to limit the pattern to the 'tag' header (i.e. a line
beginning with "tag ", which, because of the space character, can
never occur in the base64-encoded GPG signature).
Note that the forgery in 't7004-tag.sh' is not affected by this issue:
while 't7004' does create a forged signed tag kind of the same way,
it replaces "signed-tag" in the tag object, which, because of the '-'
character, can never occur in the base64-encoded GPG signarute.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two tests 'detect fudged signature' and 'detect fudged signature
with NUL' in 't7510-signed-commit.sh' check that 'git verify-commit'
errors out when encountering a forged commit, but they do so by
running
! git verify-commit ...
Use 'test_must_fail' instead, because that would catch potential
unexpected errors like a segfault as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
recount_edited_hunk() introduced in commit 2b8ea7f3c7 ("add -p:
calculate offset delta for edited patches", 2018-03-05) required all
context lines to start with a space, empty lines are not counted. This
was intended to avoid any recounting problems if the user had
introduced empty lines at the end when editing the patch. However this
introduced a regression into 'git add -p' as it seems it is common for
editors to strip the trailing whitespace from empty context lines when
patches are edited thereby introducing empty lines that should be
counted. 'git apply' knows how to deal with such empty lines and POSIX
states that whether or not there is an space on an empty context line
is implementation defined [1].
Fix the regression by counting lines that consist solely of a newline
as well as lines starting with a space as context lines and add a test
to prevent future regressions.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/diff.html
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Reported-by: Oliver Joseph Ash <oliverjash@gmail.com>
Reported-by: Jeff Felchner <jfelchner1@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "checkout" documentation describes:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat
as equivalent to [...] <remote>/<branch.
This is a really useful feature. The problem is that when you add
another remote (e.g. a fork), git won't find a unique branch name
anymore, and will instead print this unhelpful message:
$ git checkout master
error: pathspec 'master' did not match any file(s) known to git
Now it will, on my git.git checkout, print:
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
Note that the "error: pathspec[...]" message is still printed. This is
because whatever else checkout may have tried earlier, its final
fallback is to try to resolve the argument as a path. E.g. in this
case:
$ ./git --exec-path=$PWD checkout master pu
error: pathspec 'master' did not match any file(s) known to git.
error: pathspec 'pu' did not match any file(s) known to git.
There we don't print the "hint:" implicitly due to earlier logic
around the DWIM fallback. That fallback is only used if it looks like
we have one argument that might be a branch.
I can't think of an intrinsic reason for why we couldn't in some
future change skip printing the "error: pathspec[...]" error. However,
to do so we'd need to pass something down to checkout_paths() to make
it suppress printing an error on its own, and for us to be confident
that we're not silencing cases where those errors are meaningful.
I don't think that's worth it since determining whether that's the
case could easily change due to future changes in the checkout logic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assert that whenever there's a DWIM checkout that the index should be
clean afterwards, in addition to the correct branch being checked-out.
The way the DWIM checkout code in checkout.[ch] works is by looping
over all remotes, and for each remote trying to find if a given
reference name only exists on that remote, or if it exists anywhere
else.
This is done by starting out with a `unique = 1` tracking variable in
a struct shared by the entire loop, which will get set to `0` if the
data reference is not unique.
Thus if we find a match we know the dst_oid member of
tracking_name_data must be correct, since it's associated with the
only reference on the only remote that could have matched our query.
But if there was ever a mismatch there for some reason we might end up
with the correct branch checked out, but at the wrong oid, which would
show whatever the difference between the two staged in the
index (checkout branch A, stage changes from the state of branch B).
So let's amend the tests (mostly added in) 399e4a1c56 ("t2024: Add
tests verifying current DWIM behavior of 'git checkout <branch>'",
2013-04-21) to always assert that "status" is clean after we run
"checkout", that's being done with "-uno" because there's going to be
some untracked files related to the test itself which we don't care
about.
In all these tests (DWIM or otherwise) we start with a clean index, so
these tests are asserting that that's still the case after the
"checkout", failed or otherwise.
Then if we ever run into this sort of regression, either in the
existing code or with a new feature, we'll know.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull -recurse-submodules --rebase", when the submodule
repository's history did not have anything common between ours and
the upstream's, failed to execute. We need to fetch from them to
continue even in such a case.
* jt/submodule-pull-recurse-rebase:
submodule: do not pass null OID to setup_revisions
As there are plans to implement other ref storage systems,
let's use a way to remove remote refs that does not depend
on refs being files.
This makes it clear to readers that this test does not
depend on which ref backend is used.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shallow clones with --shallow-since or --shalow-exclude work by
running rev-list to get all reachable commits, then draw a boundary
between reachable and unreachable and send "shallow" requests based on
that.
The code does miss one corner case: if rev-list returns nothing, we'll
have no border and we'll send no shallow requests back to the client
(i.e. no history cuts). This essentially means a full clone (or a full
branch if the client requests just one branch). One example is the
oldest commit is older than what is specified by --shallow-since.
To avoid this, if rev-list returns nothing, we abort the clone/fetch.
The user could adjust their request (e.g. --shallow-since further back
in the past) and retry.
Another possible option for this case is to fall back to a default
depth (like depth 1). But I don't like too much magic that way because
we may return something unexpected to the user. If they request
"history since 2008" and we return a single depth at 2000, that might
break stuff for them. It is better to tell them that something is
wrong and let them take the best course of action.
Note that we need to die() in get_shallow_commits_by_rev_list()
instead of just checking for empty result from its caller
deepen_by_rev_list() and handling the error there. The reason is,
empty result could be a valid case: if you have commits in year 2013
and you request --shallow-since=year.2000 then you should get a full
clone (i.e. empty result).
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v2.18.0-rc0~10^2~1 (refspec: consolidate ref-prefix generation
logic, 2018-05-16) factored out the ref-prefix generation code for
reuse, it left out the 'if (!item->exact_sha1)' test in the original
ref-prefix generation code. As a result, fetches by SHA-1 generate
ref-prefixes as though the SHA-1 being fetched were an abbreviated ref
name:
$ GIT_TRACE_PACKET=1 bin-wrappers/git -c protocol.version=2 \
fetch origin 12039e008f
[...]
packet: fetch> ref-prefix 12039e008f
packet: fetch> ref-prefix refs/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/tags/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/heads/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/remotes/12039e008f9a4e3394f3f94f8ea897785cb09448
packet: fetch> ref-prefix refs/remotes/12039e008f9a4e3394f3f94f8ea897785cb09448/HEAD
packet: fetch> 0000
If there is another ref name on the command line or the object being
fetched is already available locally, then that's mostly harmless.
But otherwise, we error out with
fatal: no matching remote head
since the server did not send any refs we are interested in. Filter
out the exact_sha1 refspecs to avoid this.
This patch adds a test to check this behavior that notices another
behavior difference between protocol v0 and v2 in the process. Add a
NEEDSWORK comment to clear it up.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a many tests assumed that newly created refs are made as
loose refs using the files backend, which have been updated to use
proper plumbing like rev-parse and update-ref, to avoid breakage
once we start using different ref backends.
* cc/tests-without-assuming-ref-files-backend:
t990X: use '.git/objects' as 'deep inside .git' path
t: make many tests depend less on the refs being files
"git rev-parse Y..." etc. misbehaved when given endpoints were
not committishes.
* en/rev-parse-invalid-range:
rev-parse: check lookup'ed commit references for NULL
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
Commit 73c3f0f704 (index-pack: check .gitmodules files with
--strict, 2018-05-04) added a call to add_packed_git(), with
the intent that the newly-indexed objects would be available
to the process when we run fsck_finish(). But that's not
what add_packed_git() does. It only allocates the struct,
and you must install_packed_git() on the result. So that
call was effectively doing nothing (except leaking a
struct).
But wait, we passed all of the tests! Does that mean we
don't need the call at all?
For normal cases, no. When we run "index-pack --stdin"
inside a repository, we write the new pack into the object
directory. If fsck_finish() needs to access one of the new
objects, then our initial lookup will fail to find it, but
we'll follow up by running reprepare_packed_git() and
looking again. That logic was meant to handle somebody else
repacking simultaneously, but it ends up working for us
here.
But there is a case that does need this, that we were not
testing. You can run "git index-pack foo.pack" on any file,
even when it is not inside the object directory. Or you may
not even be in a repository at all! This case fails without
doing the proper install_packed_git() call.
We can make this work by adding the install call.
Note that we should be prepared to handle add_packed_git()
failing. We can just silently ignore this case, though. If
fsck_finish() later needs the objects and they're not
available, it will complain itself. And if it doesn't
(because we were able to resolve the whole fsck in the first
pass), then it actually isn't an interesting error at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_commit_buffer() function consults lookup_commit_graft()
to see if we need to rewrite parents. The latter will look
at $GIT_DIR/info/grafts. If you're outside of a repository,
then this will trigger a BUG() as of b1ef400eec (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20).
It's probably uncommon to actually parse a commit outside of
a repository, but you can see it in action with:
cd /not/a/git/repo
git index-pack --strict /some/file.pack
This works fine without --strict, but the fsck checks will
try to parse any commits, triggering the BUG(). We can fix
that by teaching the graft code to behave as if there are no
grafts when we aren't in a repository.
Arguably index-pack (and fsck) are wrong to consider grafts
at all. So another solution is to disable grafts entirely
for those commands. But given that the graft feature is
deprecated anyway, it's not worth even thinking through the
ramifications that might have.
There is one other corner case I considered here. What
should:
cd /not/a/git/repo
export GIT_GRAFT_FILE=/file/with/grafts
git index-pack --strict /some/file.pack
do? We don't have a repository, but the user has pointed us
directly at a graft file, which we could respect. I believe
this case did work that way prior to b1ef400eec. However,
fixing it now would be pretty invasive. Back then we would
just call into setup_git_env() even without a repository.
But these days it actually takes a git_dir argument. So
there would be a fair bit of refactoring of the setup code
involved.
Given the obscurity of this case, plus the fact that grafts
are deprecated and probably shouldn't work under index-pack
anyway, it's not worth pursuing further. This patch at least
un-breaks the common case where you're _not_ using grafts,
but we BUG() anyway trying to even find that out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our HTTP client code used to advertise that we accept gzip encoding
from the other side; instead, just let cURL library to advertise
and negotiate the best one.
* bw/remote-curl-compressed-responses:
remote-curl: accept compressed responses with protocol v2
remote-curl: accept all encodings supported by curl
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
When a short hexadecimal string is used to name an object but there
are multiple objects that share the string as the prefix of their
names, the code lists these ambiguous candidates in a help message.
These object names are now sorted according to their types for
easier eyeballing.
* ab/get-short-oid:
get_short_oid: sort ambiguous objects by type, then SHA-1
sha1-name.c: move around the collect_ambiguous() function
git-p4: change "commitish" typo to "committish"
sha1-array.h: align function arguments
sha1-name.c: remove stray newline
Transfer protocol v2 learned to support the partial clone.
* jt/partial-clone-proto-v2:
{fetch,upload}-pack: support filter in protocol v2
upload-pack: read config when serving protocol v2
upload-pack: fix error message typo
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
Command line completion (in contrib/) learned to complete pathnames
for various commands better.
* sg/complete-paths:
t9902-completion: exercise __git_complete_index_file() directly
completion: don't return with error from __gitcomp_file_direct()
completion: fill COMPREPLY directly when completing paths
completion: improve handling quoted paths in 'git ls-files's output
completion: remove repeated dirnames with 'awk' during path completion
t9902-completion: ignore COMPREPLY element order in some tests
completion: use 'awk' to strip trailing path components
completion: let 'ls-files' and 'diff-index' filter matching paths
completion: improve handling quoted paths on the command line
completion: support completing non-ASCII pathnames
completion: simplify prefix path component handling during path completion
completion: move __git_complete_index_file() next to its helpers
t9902-completion: add tests demonstrating issues with quoted pathnames
"git update-ref A B" is supposed to ensure that ref A does not yet
exist when B is a NULL OID, but this check was not done correctly
for pseudo-refs outside refs/ hierarchy, e.g. MERGE_HEAD.
* ma/create-pseudoref-with-null-old-oid:
refs: handle zero oid for pseudorefs
t1400: add tests around adding/deleting pseudorefs
refs.c: refer to "object ID", not "sha1", in error messages
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
With merge.renames configuration set to false, the recursive merge
strategy can be told not to spend cycles trying to find renamed
paths and merge them accordingly.
* bp/merge-rename-config:
merge: pass aggressive when rename detection is turned off
merge: add merge.renames config setting
merge: update documentation for {merge,diff}.renameLimit
The implementation of "git rebase -i --root" has been updated to use
the sequencer machinery more.
* js/sequencer-and-root-commits:
rebase --rebase-merges: root commits can be cousins, too
rebase --rebase-merges: a "merge" into a new root is a fast-forward
sequencer: allow introducing new root commits
rebase -i --root: let the sequencer handle even the initial part
sequencer: learn about the special "fake root commit" handling
sequencer: extract helper to update active_cache_tree
When writing the todo script for --rebase-merges, we try to find a label
for certain commits. If the label ends up being a valid object ID, such
as when we merge a detached commit, we want to rewrite it so it is no
longer a valid object ID.
However, the code path that does this checks for its length to be
equivalent to GIT_SHA1_RAWSZ, which isn't correct, since what we are
reading is a hex object ID. Instead, check for the length being
equivalent to that of a hex object ID. Use the_hash_algo so this code
works regardless of the hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests t9902-completion.sh and t9903-bash-prompt.sh each have tests
that check what happens when we are "in the '.git' directory" and
when we are "deep inside the '.git' directory".
To test the case when we are "deep inside the '.git' directory" the
test scripts used to perform a `cd .git/refs/heads`.
As there are plans to implement other ref storage systems, let's
use '.git/objects' instead of '.git/refs/heads' as the "deep inside
the '.git' directory" path.
This makes it clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only benefit from this move (apart from cleaner code) is that
advice.amWorkDir should now show up in `git help --config`. There
should be no regression since advice config is always read by the
git_default_config().
While at there, use advise() like other code. We now get "hint: "
prefix and the output is stderr instead of stdout (which is also the
reason for the test update because stderr is checked in a following
test and the extra advice can fail it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
Most --no- options do have some use, even if rarely to negate some
option that's specified in an alias.
These options --no-ours and --no-theirs however have no clear
semantics. If I specify "--ours --no-theirs", the second will reset
writeout stage and is equivalent of "--no-ours --no-theirs" which is
not that easy to see. Drop them. You can either switch from --ours to
--theirs and back but you can never negate them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 7fb6aefd2a (Merge branch 'nd/parseopt-completion' - 2018-03-14)
is merged, the completion for negative form is left out because the
series is alread long and it could be done in a follow up series. This
is it.
--git-completion-helper now provides --no-xxx so that git-completion.bash
can drop the extra custom --no-xxx in the script. It adds a lot more
--no-xxx than what's current provided by the git-completion.bash
script. We'll trim that down later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to 'git reset -N', this option makes 'git apply' automatically
mark new files as intent-to-add so they are visible in the following
'git diff' command and could also be committed with 'git commit -a'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous attempts to fix ita-related diffs breaks this case. To make
sure that does not happen again, add a test to verify the behavior
wrt. ita entries when we diff a worktree and a tree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the implementation detail of intent-to-add entries, the current
"git diff" (i.e. no treeish or --cached argument) would show the
changes in the i-t-a file, but it does not mark the file as new, while
"diff --cached" would mark the file as new while showing its content
as empty.
$ git diff | $ diff --cached
--------------------------------|-------------------------------
diff --git a/new b/new | diff --git a/new b/new
index e69de29..5ad28e2 100644 | new file mode 100644
--- a/new | index 0000000..e69de29
+++ b/new |
@@ -0,0 +1 @@ |
+haha |
One evidence of the current output being wrong is that, the output
from "git diff" (with ita entries) cannot be applied because it
assumes empty files exist before applying.
Turning on --ita-invisible-in-index [1] [2] would fix this. The result
is "new file" line moving from "git diff --cached" to "git diff".
$ git diff | $ diff --cached
--------------------------------|-------------------------------
diff --git a/new b/new |
new file mode 100644 |
index 0000000..5ad28e2 |
--- /dev/null |
+++ b/new |
@@ -0,0 +1 @@ |
+haha |
This option is on by default in git-status [1] but we need more fixup
in rename detection code [3]. Luckily we don't need to do anything
else for the rename detection code in diff.c (wt-status.c uses a
customized one).
[1] 425a28e0a4 (diff-lib: allow ita entries treated as "not yet exist
in index" - 2016-10-24)
[2] b42b451919 (diff: add --ita-[in]visible-in-index - 2016-10-24)
[3] bc3dca07f4 (Merge branch 'nd/ita-wt-renames-in-status' - 2018-01-23)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is supposed to fix the diff of "diff-files" (not reporting
ita entries as new files) and "diff-index --cached <tree>" (showing ita
entries as present in the index with empty content) but not
"diff-index <tree>".
When --ita-invisible-in-index is set on "git diff-index <tree>",
unpack_trees() will eventually call oneway_diff() on the ita entry
with the same code flow as "diff-index --cached <tree>". We want to
ignore the ita entry for "diff-index --cached <tree>" but not
"diff-index <tree>" since the latter will examine and produce a diff
based on worktree entry's (real) content, not ita index entry's
(empty) content.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manually cleaning up from former tests in subsequent ones breaks the
ability to select which tests we want to run. Use test_when_finished to
avoid this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests used pretty strong measures to get a clean slate:
git rm -rf . &&
git clean -fdqx &&
rm -rf .git &&
git init &&
It's easier, safer (what if a previous test has a bug and accidentally
changes into a directory outside the test path?), and allows re-inspecting
test setup later if we instead just use test_create_repo to put different
tests into separate sub-repositories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git pull --recurse-submodules --rebase" is invoked when the current
branch and its corresponding remote-tracking branch have no merge base,
a "bad object" fatal error occurs. This issue was introduced with commit
a6d7eb2c7a ("pull: optionally rebase submodules (remote submodule
changes only)", 2017-06-23), which also introduced this feature.
This is because cmd_pull() in builtin/pull.c thus invokes
submodule_touches_in_range() with a null OID as the first parameter.
Ensure that this case works, and document what happens in this case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits 2122f8b963 ("rev-parse: Add support for the ^! and ^@ syntax",
2008-07-26) and 3dd4e7320d ("Teach rev-parse the ... syntax.", 2006-07-04)
taught rev-parse new syntax, and used lookup_commit_reference() as part of
their logic. Neither usage checked the returned commit to see if it was
non-NULL before using it. Check for NULL and ensure an appropriate error
is reported to the user.
Reported by Florian Weimer and Todd Zullinger.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to "unshelve" a shelved P4 commit into
a git commit.
For example:
$ git p4 unshelve 12345
The resulting commit ends up in the branch:
refs/remotes/p4/unshelved/12345
If that branch already exists, it is renamed - for example
the above branch would be saved as p4/unshelved/12345.1.
git-p4 checks that the shelved changelist is based on files
which are at the same Perforce revision as the origin branch
being used for the unshelve (HEAD by default). If they are not,
it will refuse to unshelve. This is to ensure that the unshelved
change does not contain other changes mixed-in.
The reference branch can be changed manually with the "--origin"
option.
The change adds a new Unshelve command class. This just runs the
existing P4Sync code tweaked to handle a shelved changelist.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.
This will make clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.
This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learned to pay attention to UI related diff
configuration variables such as diff.renames.
* em/status-rename-config:
wt-status: use settings from git_diff_ui_config
"git format-patch --cover --attach" created a broken MIME multipart
message for the cover letter, which has been fixed by keeping the
cover letter as plain text file.
* bc/format-patch-cover-no-attach:
format-patch: make cover letters always text/plain
A test to see if the filesystem normalizes UTF-8 filename has been
updated to check what we need to know in a more direct way, i.e. a
path created in NFC form can be accessed with NFD form (or vice
versa) to cope with APFS as well as HFS.
* tb/test-apfs-utf8-normalization:
test: correct detection of UTF8_NFD_TO_NFC for APFS
"git rebase" learned "--rebase-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i --rebase-merges: add a section to the man page
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
pull: accept --rebase=merges to recreate the branch topology
rebase --rebase-merges: avoid "empty merges"
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase --rebase-merges: add test for --keep-empty
rebase: introduce the --rebase-merges option
rebase-helper --make-script: introduce a flag to rebase merges
sequencer: fast-forward `merge` commands, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: offer helpful advice when a command was rescheduled
sequencer: refactor how original todo list lines are accessed
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work. Incidentally, this also avoids updating a file in the
working tree after a (non-trivial) merge whose result matches what
our side originally had.
* en/rename-directory-detection-reboot: (36 commits)
merge-recursive: fix check for skipability of working tree updates
merge-recursive: make "Auto-merging" comment show for other merges
merge-recursive: fix remainder of was_dirty() to use original index
merge-recursive: fix was_tracked() to quit lying with some renamed paths
t6046: testcases checking whether updates can be skipped in a merge
merge-recursive: avoid triggering add_cacheinfo error with dirty mod
merge-recursive: move more is_dirty handling to merge_content
merge-recursive: improve add_cacheinfo error handling
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
...
"git rebase -i" sometimes left intermediate "# This is a
combination of N commits" message meant for the human consumption
inside an editor in the final result in certain corner cases, which
has been fixed.
* js/rebase-i-clean-msg-after-fixup-continue:
rebase --skip: clean up commit message after a failed fixup/squash
sequencer: always commit without editing when asked for
rebase -i: Handle "combination of <n> commits" with GETTEXT_POISON
rebase -i: demonstrate bugs with fixup!/squash! commit messages
"git worktree add" learned to check out an existing branch.
* tg/worktree-add-existing-branch:
worktree: teach "add" to check out existing branches
worktree: factor out dwim_branch function
worktree: improve message when creating a new worktree
worktree: remove extra members from struct add_opts
The functionality of "$GIT_DIR/info/grafts" has been superseded by
the "refs/replace/" mechanism for some time now, but the internal
code had support for it in many places, which has been cleaned up
in order to drop support of the "grafts" mechanism.
* js/deprecate-grafts:
Remove obsolete script to convert grafts to replace refs
technical/shallow: describe why shallow cannot use replace refs
technical/shallow: stop referring to grafts
filter-branch: stop suggesting to use grafts
Deprecate support for .git/info/grafts
Add a test for `git replace --convert-graft-file`
replace: introduce --convert-graft-file
replace: prepare create_graft() for converting graft files wholesale
replace: "libify" create_graft() and callees
replace: avoid using die() to indicate a bug
commit: Let the callback of for_each_mergetag return on error
argv_array: offer to split a string by whitespace
The transport protocol v2 is getting updated further.
* bw/server-options:
fetch: send server options when using protocol v2
ls-remote: send server options when using protocol v2
serve: introduce the server-option capability
"git gc" in a large repository takes a lot of time as it considers
to repack all objects into one pack by default. The command has
been taught to pretend as if the largest existing packfile is
marked with ".keep" so that it is left untouched while objects in
other packs and loose ones are repacked.
* nd/repack-keep-pack:
pack-objects: show some progress when counting kept objects
gc --auto: exclude base pack if not enough mem to "repack -ad"
gc: handle a corner case in gc.bigPackThreshold
gc: add gc.bigPackThreshold config
gc: add --keep-largest-pack option
repack: add --keep-pack option
t7700: have closing quote of a test at the beginning of line
The code did not propagate the terminal width to subprocesses via
COLUMNS environment variable, which it now does. This caused
trouble to "git column" helper subprocess when "git tag --column=row"
tried to list the existing tags on a display with non-default width.
* nd/term-columns:
column: fix off-by-one default width
pager: set COLUMNS to term_columns()
Configure curl to accept all encodings which curl supports instead of
only accepting gzip responses.
This fixes an issue when using an installation of curl which is built
without the "zlib" feature. Since aa90b9697 (Enable info/refs gzip
decompression in HTTP client, 2012-09-19) we end up requesting "gzip"
encoding anyway despite libcurl not being able to decode it. Worse,
instead of getting a clear error message indicating so, we end up
falling back to "dumb" http, producing a confusing and difficult to
debug result.
Since curl doesn't do any checking to verify that it supports the a
requested encoding, instead set the curl option `CURLOPT_ENCODING` with
an empty string indicating that curl should send an "Accept-Encoding"
header containing only the encodings supported by curl.
Reported-by: Anton Golubev <anton.golubev@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.15:
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.14:
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
We've recently forbidden .gitmodules to be a symlink in
verify_path(). And it's an easy way to circumvent our fsck
checks for .gitmodules content. So let's complain when we
see it.
Signed-off-by: Jeff King <peff@peff.net>
Now that the internal fsck code has all of the plumbing we
need, we can start checking incoming .gitmodules files.
Naively, it seems like we would just need to add a call to
fsck_finish() after we've processed all of the objects. And
that would be enough to cover the initial test included
here. But there are two extra bits:
1. We currently don't bother calling fsck_object() at all
for blobs, since it has traditionally been a noop. We'd
actually catch these blobs in fsck_finish() at the end,
but it's more efficient to check them when we already
have the object loaded in memory.
2. The second pass done by fsck_finish() needs to access
the objects, but we're actually indexing the pack in
this process. In theory we could give the fsck code a
special callback for accessing the in-pack data, but
it's actually quite tricky:
a. We don't have an internal efficient index mapping
oids to packfile offsets. We only generate it on
the fly as part of writing out the .idx file.
b. We'd still have to reconstruct deltas, which means
we'd basically have to replicate all of the
reading logic in packfile.c.
Instead, let's avoid running fsck_finish() until after
we've written out the .idx file, and then just add it
to our internal packed_git list.
This does mean that the objects are "in the repository"
before we finish our fsck checks. But unpack-objects
already exhibits this same behavior, and it's an
acceptable tradeoff here for the same reason: the
quarantine mechanism means that pushes will be
fully protected.
In addition to a basic push test in t7415, we add a sneaky
pack that reverses the usual object order in the pack,
requiring that index-pack access the tree and blob during
the "finish" step.
This already works for unpack-objects (since it will have
written out loose objects), but we'll check it with this
sneaky pack for good measure.
Signed-off-by: Jeff King <peff@peff.net>
As with the previous commit, we must call fsck's "finish"
function in order to catch any queued objects for
.gitmodules checks.
This second pass will be able to access any incoming
objects, because we will have exploded them to loose objects
by now.
This isn't quite ideal, because it means that bad objects
may have been written to the object database (and a
subsequent operation could then reference them, even if the
other side doesn't send the objects again). However, this is
sufficient when used with receive.fsckObjects, since those
loose objects will all be placed in a temporary quarantine
area that will get wiped if we find any problems.
Signed-off-by: Jeff King <peff@peff.net>
Now that the internal fsck code is capable of checking
.gitmodules files, we just need to teach its callers to use
the "finish" function to check any queued objects.
With this, we can now catch the malicious case in t7415 with
git-fsck.
Signed-off-by: Jeff King <peff@peff.net>
* jk/submodule-name-verify-fix:
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_path: drop clever fallthrough
skip_prefix: add icase-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
path: match NTFS short names for more .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
Note that this includes two bits of evil-merge:
- there's a new call to verify_path() that doesn't actually
have a mode available. It should be OK to pass "0" here,
since we're just manipulating the untracked cache, not an
actual index entry.
- the lstat() in builtin/update-index.c:update_one() needs
to be updated to handle the fsmonitor case (without this
it still behaves correctly, but does an unnecessary
lstat).
This tests primarily for NTFS issues, but also adds one example of an
HFS+ issue.
Thanks go to Congyi Wu for coming up with the list of examples where
NTFS would possibly equate the filename with `.gitmodules`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
Now that we use generation numbers from the commit-graph, we must
ensure that all commits that exist in the commit-graph are loaded
from that file instead of from the object database. Since the
commit-graph file is only checked if core.commitGraph is true, we
must check the default config before we load any commits.
In the merge builtin, the config was checked after loading the HEAD
commit. This was due to the use of the global 'branch' when checking
merge-specific config settings.
Move the config load to be between the initialization of 'branch' and
the commit lookup.
Without this change, a fast-forward merge would hit a BUG("bad
generation skip") statement in commit.c during paint_down_to_common().
This is because the HEAD commit would be loaded with "infinite"
generation but then reached by commits with "finite" generation
numbers.
Add a test to t5318-commit-graph.sh that exercises this code path to
prevent a regression.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --dissociate option to add and update commands, both clone helper commands
that already have the --reference option --dissociate pairs with.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--progress' was introduced in 72c5f88311 (clone: pass --progress
decision to recursive submodules, 2016-09-22) to fix the progress reporting
of the clone command. Also add the progress option to the 'submodule add'
command. The update command already supports the progress flag, but it
is not documented.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test enumerates log entries and then sorts them. For SHA-1, this
produces results that happen to sort in the order specified in the test,
but for other hash algorithms they sort differently. Ensure we sort the
log entries in a hash-independent way by sorting on the ref name instead
of the object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test code so that it computes variables for blobs instead of
using hard-coded hashes. This makes t4033 and t4050 (the patience and
histogram tests) pass.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We typically indent our tests with a single tab, partially so that we
can take advantage of indented heredocs. Make this change and move the
quote marks to be in the typical position for our tests.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes values for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs and uses the
ZERO_OID variable instead of using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip out the index lines in the diff before comparing them, as these
will differ between hash algorithms. This leads to a smaller, simpler
change than editing the index line.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By providing aliases via --list-cmds=, we could simplify command
collection code in the script. We only issue one git command. Before
this patch that is "git config", after it's "git --list-cmds=". In
"git help" completion case we actually reduce one "git" process (for
getting guides) but that call was added in this series so it does not
really count.
A couple of bash functions are removed because they are not needed
anymore. __git_compute_all_commands() and $__git_all_commands stay
because they are still needed for completing pager.* config and
without "alias" group, the result is still cacheable.
There is a slight (good) change in _git_help() with this patch: before
"git help <tab>" shows external commands (as in _not_ part of git) as
well as part of $__git_all_commands. We have finer control over
command listing now and can exclude that because we can't provide a
man page for external commands anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a separate list of command classification,
which often could go out of date, let's centralize the information
back in git.
While the function in git-completion.bash implies "list porcelain
commands", that's not exactly what it does. It gets all commands (aka
--list-cmds=main,others) then exclude certain non-porcelain ones. We
could almost recreate this list two lists list-mainporcelain and
others. The non-porcelain-but-included-anyway is added by the third
category list-complete.
Note that the current completion script incorrectly classifies
filter-branch as porcelain and t9902 tests this behavior. We keep it
this way in t9902 because this test does not really care which
particular command is porcelain or plumbing, they're just names.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help command currently hard codes the list of guides and their
summary in C. Let's move this list to command-list.txt. This lets us
extract summary lines from Documentation/git*.txt. This also
potentially lets us list guides in git.txt, but I'll leave that for
now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lists all recognized commands [1] by category. The group order
follows closely git.txt.
[1] We may actually show commands that are not built (e.g. if you set
NO_PERL you don't have git-instaweb but it's still listed here). I
ignore the problem because on Linux a git package could be split
anyway. The "git-core" package may not contain git-instaweb even if
it's built because it may end up in a separate package. We can't know
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if these are hidden options, let's make them a bit more generic
since we're introducing more listing types shortly. The code is
structured to allow combining multiple listing types together because
we will soon add more types the 'builtins'.
'parseopt' remains separate because it has separate (SPC) to match
git-completion.bash needs and will not combine with others.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "config --blob" outside of a repository, then we
eventually try to resolve the blob name and hit a BUG().
Let's catch this earlier and provide a useful message.
Note that we could also catch this much lower in the stack,
in git_config_from_blob_ref(). That might cover other
callsites, too, but it's unclear whether those ones would
actually be bugs or not. So let's leave the low-level
functions to assume the caller knows what it's doing (and
BUG() if it turns out it doesn't).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests added in 2f271cd9cf (t9902-completion: add tests
demonstrating issues with quoted pathnames, 2018-05-08) and in
2ab6eab4fe (completion: improve handling quoted paths in 'git
ls-files's output, 2018-03-28) have a few shortcomings:
- All these tests use the 'test_completion' helper function, thus
they are exercising the whole completion machinery, although they
are only interested in how git-aware path completion, specifically
the __git_complete_index_file() function deals with unusual
characters in pathnames and on the command line.
- These tests can't satisfactorily test the case of pathnames
containing spaces, because 'test_completion' gets the words on the
command line as a single argument and it uses space as word
separator.
- Some of the tests are protected by different FUNNYNAMES_* prereqs
depending on whether they put backslashes and double quotes or
separator characters (FS, GS, RS, US) in pathnames, although a
filesystem not allowing one likely doesn't allow the others
either.
- One of the tests operates on paths containing '|' and '&'
characters without being protected by a FUNNYNAMES prereq, but
some filesystems (notably on Windows) don't allow these characters
in pathnames, either.
Replace these tests with basically equivalent, more focused tests that
call __git_complete_index_file() directly. Since this function only
looks at the current word to be completed, i.e. the $cur variable, we
can easily include pathnames containing spaces in the tests, so use
such pathnames instead of pathnames containing '|' and '&'. Finally,
use only a single FUNNYNAMES prereq for all kinds of special
characters.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to generate ref-prefixes, to be used for server-side
filtering of the ref-advertisement, based on the configured fetch
refspec ('remote.<name>.fetch') when no user provided refspec exists.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last two tests 'editor with a space' and 'core.editor with a
space' in 't7005-editor.sh' need the SPACES_IN_FILENAMES prereq to
ensure that they are only run on filesystems that allow, well, spaces
in filenames. However, we have been putting a space in the name of
the trash directory for just over a decade now, so we wouldn't be able
to run any of our tests on such a filesystem in the first place.
This prereq is therefore unnecessary, remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it uses variables and command substitution for
trees instead of hard-coded hashes. This also has the benefit of making
it more obvious how the test works.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests rely on creating packs with specially named objects which
are necessarily dependent on the hash used. Skip these tests if we're
not using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relies on objects with colliding short names which are
necessarily dependent on the hash used. Skip the test if we're not
using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relies on objects with colliding short names which are
necessarily dependent on the hash used. Skip the test if we're not
using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a core test that tests basic functionality, annotate the
assertions that have dependencies on SHA-1 with the appropriate
prerequisite.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a core test that tests basic functionality, annotate the
assertions that have dependencies on SHA-1 with the appropriate
prerequisite.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we have a variable, $_x40, which contains a regex that matches
a full 40-character hex constant. However, with NewHash, we'll have
object IDs that are longer than 40 characters. In such a case, $_x40
will be a confusing name. Create a $OID_REGEX variable which will
always reflect a regex matching the appropriate object ID, regardless of
the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we have a variable, $_z40, which contains the all-zero object
ID. However, with NewHash, we'll have an all-zero object ID which is
longer than 40 hex characters. In such a case, $_z40 will be a
confusing name. Create a $ZERO_OID variable which will always reflect
the all-zeros object ID, regardless of the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some basic tests in our codebase that test that we get fixed
SHA-1 values. These are valuable because they make sure that our SHA-1
implementation is free of bugs, but obviously these tests will fail with
a different hash.
There are also tests which intentionally produce objects that have
collisions when truncated to a certain length to test our handling of
these cases. These tests, too, will fail with a different hash.
Add an SHA1 prerequisite to annotate both of these types of tests and
disable them when we're using a different hash. In the future, we will
create versions of these tests which handle both SHA-1 and NewHash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do the preparatory fetch inside the test of ls-remote --symref to avoid
cluttering the test output and to be able to catch unexpected fetch
failures.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After performing a merge that has conflicts git status will, by default,
attempt to detect renames which causes many objects to be examined. In a
virtualized repo, those objects do not exist locally so the rename logic
triggers them to be fetched from the server. This results in the status call
taking hours to complete on very large repos vs seconds with this patch.
Add a new config status.renames setting to enable turning off rename
detection during status and commit. This setting will default to the value
of diff.renames.
Add a new config status.renamelimit setting to to enable bounding the time
spent finding out inexact renames during status and commit. This setting
will default to the value of diff.renamelimit.
Add --no-renames command line option to status that enables overriding the
config setting from the command line. Add --find-renames[=<n>] command line
option to status that enables detecting renames and optionally setting the
similarity index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com>
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default we want to fill the whole screen if possible, but we do not
want to use up _all_ terminal columns because the last character is
going hit the border, push the cursor over and wrap. Keep it at
default value zero, which will make print_columns() set the width at
term_columns() - 1.
This affects the test in t7004 because effective column width before
was 40 but now 39 so we need to compensate it by one or the output at
39 columns has a different layout.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation, it is possible to "specify 40 '0' or an
empty string as <oldvalue> to make sure that the ref you are creating
does not exist." But in the code for pseudorefs, we do not implement
this, as demonstrated by the failing tests added in the previous commit.
If we fail to read the old ref, we immediately die. But a failure to
read would actually be a good thing if we have been given the zero oid.
With the zero oid, allow -- and even require -- the ref-reading to fail.
This implements the "make sure that the ref ... does not exist" part of
the documentation and fixes both failing tests from the previous commit.
Since we have a `strbuf err` for collecting errors, let's use it and
signal an error to the caller instead of dying hard.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have not been able to find any tests around adding pseudorefs using
`git update-ref`. Add some as outlined in this table (original design by
Michael Haggerty; modified and extended by me):
Pre-update value | ref-update old OID | Expected result
-------------------|----------------------|----------------
missing | value | reject
missing | none given | accept
set | none given | accept
set | correct value | accept
set | wrong value | reject
missing | zero | accept *
set | zero | reject *
The tests marked with a * currently fail, despite git-update-ref(1)
claiming that it is possible to "specify 40 '0' or an empty string as
<oldvalue> to make sure that the ref you are creating does not exist."
These failing tests will be fixed in the next commit.
It is only natural to test deletion as well. Test deletion without an
old OID, with a correct one and with an incorrect one.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the output emitted when an ambiguous object is encountered so
that we show tags first, then commits, followed by trees, and finally
blobs. Within each type we show objects in hashcmp() order. Before
this change the objects were only ordered by hashcmp().
The reason for doing this is that the output looks better as a result,
e.g. the v2.17.0 tag before this change on "git show e8f2" would
display:
hint: The candidates are:
hint: e8f2093055 tree
hint: e8f21caf94 commit 2013-06-24 - bash prompt: print unique detached HEAD abbreviated object name
hint: e8f21d02f7 blob
hint: e8f21d577c blob
hint: e8f25a3a50 tree
hint: e8f26250fa commit 2017-02-03 - Merge pull request #996 from jeffhostetler/jeffhostetler/register_rename_src
hint: e8f2650052 tag v2.17.0
hint: e8f2867228 blob
hint: e8f28d537c tree
hint: e8f2a35526 blob
hint: e8f2bc0c06 commit 2015-05-10 - Documentation: note behavior for multiple remote.url entries
hint: e8f2cf6ec0 tree
Now we'll instead show:
hint: e8f2650052 tag v2.17.0
hint: e8f21caf94 commit 2013-06-24 - bash prompt: print unique detached HEAD abbreviated object name
hint: e8f26250fa commit 2017-02-03 - Merge pull request #996 from jeffhostetler/jeffhostetler/register_rename_src
hint: e8f2bc0c06 commit 2015-05-10 - Documentation: note behavior for multiple remote.url entries
hint: e8f2093055 tree
hint: e8f25a3a50 tree
hint: e8f28d537c tree
hint: e8f2cf6ec0 tree
hint: e8f21d02f7 blob
hint: e8f21d577c blob
hint: e8f2867228 blob
hint: e8f2a35526 blob
Since we show the commit data in the output that's nicely aligned once
we sort by object type. The decision to show tags before commits is
pretty arbitrary. I don't want to order by object_type since there
tags come last after blobs, which doesn't make sense if we want to
show the most important things first.
I could display them after commits, but it's much less likely that
we'll display a tag, so if there is one it makes sense to show it
prominently at the top.
A note on the implementation: Derrick rightly pointed out[1] that
we're bending over backwards here in get_short_oid() to first
de-duplicate the list, and then emit it, but could simply do it in one
step.
The reason for that is that oid_array_for_each_unique() doesn't
actually require that the array be sorted by oid_array_sort(), it just
needs to be sorted in some order that guarantees that all objects with
the same ID are adjacent to one another, which (barring a hash
collision, which'll be someone else's problem) the sort_ambiguous()
function does.
I agree that would be simpler for this code, and had forgotten why I
initially wrote it like this[2]. But on further reflection I think
it's better to do more work here just so we're not underhandedly using
the oid-array API where we lie about the list being sorted. That would
break any subsequent use of oid_array_lookup() in subtle ways.
I could get around that by hacking the API itself to support this
use-case and documenting it, which I did as a WIP patch in [3], but I
think it's too much code smell just for this one call site. It's
simpler for the API to just introduce a oid_array_for_each() function
to eagerly spew out the list without sorting or de-duplication, and
then do the de-duplication and sorting in two passes.
1. https://public-inbox.org/git/20180501130318.58251-1-dstolee@microsoft.com/
2. https://public-inbox.org/git/876047ze9v.fsf@evledraar.gmail.com/
3. https://public-inbox.org/git/874ljrzctc.fsf@evledraar.gmail.com/
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b2dc968e60 (t5516: refactor oddball tests, 2008-11-07) accidentaly
broke the &&-chain in the test 'push does not update local refs on
failure', but since it was in a subshell, chain-lint couldn't notice
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a while-at-it cleanup replacing a 'cd dir && <...> && cd ..' with a
subshell, commit 28391a80a9 (receive-pack: allow deletion of corrupt
refs, 2007-11-29) also moved the assignment of the $old_commit
variable to that subshell. This variable, however, is used outside of
that subshell as a parameter of check_push_result(), to check that a
ref still points to the commit where it is supposed to. With the
variable remaining unset outside the subshell check_push_result()
doesn't perform that check at all.
Use 'git -C <dir> cmd...', so we don't need to change directory, and
thus don't need the subshell either when setting $old_commit.
Furthermore, change check_push_result() to require at least three
parameters (the repo, the oid, and at least one ref), so it will catch
similar issues earlier should they ever arise.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two JGit tests 'we can read jgit bitmaps' and 'jgit can read our
bitmaps' in 't5310-pack-bitmaps.sh' fail when run with
GIT_TEST_SPLIT_INDEX=YesPlease. Both tests create a clone of the test
repository to check bitmap interoperability with JGit. With split
indexes enabled the index in the clone repositories contains the
'link' extension, which JGit doesn't support and, consequently, an
exception aborts it:
<...>
org.eclipse.jgit.api.errors.JGitInternalException: DIRC extension 'link' not supported by this version.
at org.eclipse.jgit.dircache.DirCache.readFrom(DirCache.java:562)
<...>
Since testing bitmaps doesn't need a worktree in the first place,
let's just create bare clones for the two JGit tests, so the cloned
won't have an index, and these two tests can be executed even with
split index enabled.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added code generation for all_cmd_desc[] which
includes almost everything we need to generate common command list.
Convert help code to use that array instead and drop common_cmds[] array.
The description of each common command group is removed from
command-list.txt. This keeps this file format simpler. common-cmds.h
will not be generated correctly after this change due to the
command-list.txt format change. But it does not matter and
common-cmds.h will be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
Each of these `struct lock_file`s is used from within a single function.
Move them into the respective functions to make the scope clearer and
drop the staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
After this commit, the remaining occurrences of "static struct
lock_file" are locks that are used from within different functions. That
is, they need to remain static. (Short of more intrusive changes like
passing around pointers to non-static locks.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Die in case writing the index fails, so that the caller can notice
(instead of, say, being impressed by how performant the writing is).
While at it, note that after opening a lock with `LOCK_DIE_ON_ERROR`, we
do not need to worry about whether we succeeded. Also, we can move the
`struct lock_file` into the function and drop the staticness. (Placing
`struct lock_file`s on the stack used to be a bad idea, because the
temp- and lockfile-machinery would keep a pointer into the struct. But
after 076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05),
we can safely have lockfiles on the stack.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was observed that the variable '$displaypath' was accessible but
undocumented. Hence, document it.
Discussed-with: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git submodule foreach --recursive' from a subdirectory of
your repository, nested submodules get a bogus value for $path:
For a submodule 'sub' that contains a nested submodule 'nested',
running 'git -C dir submodule foreach echo $path' from the root of the
superproject would report path='../nested' for the nested submodule.
The first part '../' is derived from the logic computing the relative
path from $pwd to the root of the superproject. The second part is the
submodule path inside the submodule. This value is of little use and is
hard to document.
Also, in git-submodule.txt, $path is documented to be the "name of the
submodule directory relative to the superproject", but "the
superproject" is ambiguous.
To resolve both these issues, we could:
(a) Change "the superproject" to "its immediate superproject", so
$path would be "nested" instead of "../nested".
(b) Change "the superproject" to "the superproject the original
command was run from", so $path would be "sub/nested" instead of
"../nested".
(c) Change "the superproject" to "the directory the original command
was run from", so $path would be "../sub/nested" instead of
"../nested".
The behavior for (c) was attempted to be introduced in 091a6eb0fe
(submodule: drop the top-level requirement, 2013-06-16) with the intent
for $path to be relative from $pwd to the submodule worktree, but that
did not work for nested submodules, as the intermittent submodules
were not included in the path.
If we were to fix the meaning of the $path using (a), we would break
any existing submodule user that runs foreach from non-root of the
superproject as the non-nested submodule '../sub' would change its
path to 'sub'.
If we were to fix the meaning of $path using (b), then we would break
any user that uses nested submodules (even from the root directory)
as the 'nested' would become 'sub/nested'.
If we were to fix the meaning of $path using (c), then we would break
the same users as in (b) as 'nested' would become 'sub/nested' from
the root directory of the superproject.
All groups can be found in the wild. The author has no data if one group
outweighs the other by large margin, and offending each one seems equally
bad at first. However in the authors imagination it is better to go with
(a) as running from a sub directory sounds like it is carried out by a
human rather than by some automation task. With a human on the keyboard
the feedback loop is short and the changed behavior can be adapted to
quickly unlike some automation that can break silently.
Discussed-with: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test script 't6050-replace.sh' starts off with redirecting the
whole test script's stdin from /dev/null. This redirection has been
there since the test script was introduced in a3e8267225
(replace_object: add a test case, 2009-01-23), but the commit message
doesn't explain why it was deemed necessary. AFAICT, it has never
been necessary, and t6050 runs just fine and succeeds even without it,
not only the current version but past versions as well.
Besides being unnecessary, this redirection is also harmful, as it
prevents the test helper functions 'test_pause' and 'debug' from
working properly in t6050, because we can't enter any commands to the
shell and the debugger, respectively.
So let's remove that redirection.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to control rename detection for merge via a config setting.
This setting behaves the same and defaults to the value of diff.renames but only
applies to merge.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can-working-tree-updates-be-skipped check has had a long and blemished
history. The update can be skipped iff:
a) The merge is clean
b) The merge matches what was in HEAD (content, mode, pathname)
c) The target path is usable (i.e. not involved in D/F conflict)
Traditionally, we split b into parts:
b1) The merged result matches the content and mode found in HEAD
b2) The merged target path existed in HEAD
Steps a & b1 are easy to check; we have always gotten those right. While
it is easy to overlook step c, this was fixed seven years ago with commit
4ab9a157d0 ("merge_content(): Check whether D/F conflicts are still
present", 2010-09-20). merge-recursive didn't have a readily available
way to directly check step b2, so various approximations were used:
* In commit b2c8c0a762 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-02-28), it was noted that although
the code claimed it was skipping the update, it did not actually skip
the update. The code was made to skip it, but used lstat(path, ...)
as an approximation to path-was-tracked-in-index-before-merge.
* In commit 5b448b8530 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-08-11), the problem with using
lstat was noted. It was changed to the approximation
path2 && strcmp(path, path2)
which is also wrong. !path2 || strcmp(path, path2) would have been
better, but would have fallen short with directory renames.
* In c5b761fb27 ("merge-recursive: ensure we write updates for
directory-renamed file", 2018-02-14), the problem with the previous
approximation was noted and changed to
was_tracked(path)
That looks close to what we were trying to answer, but was_tracked()
as implemented at the time should have been named is_tracked(); it
returned something different than what we were looking for.
* To make matters more complex, fixing was_tracked() isn't sufficient
because the splitting of b into b1 and b2 is wrong. Consider the
following merge with a rename/add conflict:
side A: modify foo, add unrelated bar
side B: rename foo->bar (but don't modify the mode or contents)
In this case, the three-way merge of original foo, A's foo, and B's
bar will result in a desired pathname of bar with the same
mode/contents that A had for foo. Thus, A had the right mode and
contents for the file, and it had the right pathname present (namely,
bar), but the bar that was present was unrelated to the contents, so
the working tree update was not skippable.
Fix this by introducing a new function:
was_tracked_and_matches(o, path, &mfi.oid, mfi.mode)
and use it to directly check for condition b.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add several tests checking whether updates can be skipped in a merge.
Also add several similar testcases for where updates cannot be skipped in
a merge to make sure that we skip if and only if we should.
In particular:
* Testcase 1a (particularly 1a-check-L) would have pointed out the
problem Linus has been dealing with for year with his merges[1].
* Testcase 2a (particularly 2a-check-L) would have pointed out the
problem with my directory-rename-series before it broke master[2].
* Testcases 3[ab] (particularly 3a-check-L) provide a simpler testcase
than 12b of t6043 making that one easier to understand.
* There are several complementary testcases to make sure we're not just
fixing those particular issues while regressing in the opposite
direction.
* There are also a pair of tests for the special case when a merge
results in a skippable update AND the user has dirty modifications to
the path.
[1] https://public-inbox.org/git/CA+55aFzLZ3UkG5svqZwSnhNk75=fXJRkvU1m_RHBG54NOoaZPA@mail.gmail.com/
[2] https://public-inbox.org/git/xmqqmuya43cs.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a cherry-pick or merge with a rename results in a skippable update
(due to the merged content matching what HEAD already had), but the
working directory is dirty, avoid trying to refresh the index as that
will fail.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Four closely related changes all with the purpose of fixing error handling
in this function:
- fix reported function name in add_cacheinfo error messages
- differentiate between the two error messages
- abort early when we hit the error (stop ignoring return code)
- mark a test which was hitting this error as failing until we get the
right fix
In more detail...
In commit 0424138d57 ("Fix bogus error message from merge-recursive
error path", 2007-04-01), it was noted that the name of the function which
the error message claimed it was reported from did not match the actual
function name. This was changed to something closer to the real function
name, but it still didn't match the actual function name. Fix the
reported name to match.
Second, the two errors in this function had identical messages, preventing
us from knowing which error had been triggered. Add a couple words to the
second error message to differentiate the two.
Next, make sure callers do not ignore the return code so that it will stop
processing further entries (processing further entries could result in
more output which could cause the error to scroll off the screen, or at
least be missed by the user) and make it clear the error is the cause of
the early abort. These errors should never be triggered in production; if
either one is, it represents a bug in the calling path somewhere and is
likely to have resulted in mis-merged content. The combination of
ignoring of the return code and continuing to print other standard
messages after hitting the error resulted in the following bug report from
Junio: "...the command pretends that everything went well and merged
cleanly in that path...[Behaving] in a buggy and unexplainable way is bad
enough, doing so silently is unexcusable." Fix this.
Finally, there was one test in the testsuite that did hit this error path,
but was passing anyway. This would have been easy to miss since it had a
test_must_fail and thus could have failed for the wrong reason, but in a
separate testing step I added an intentional NULL-dereference to the
codepath where these error messages are printed in order to flush out such
cases. I could modify that test to explicitly check for this error and
fail the test if it is hit, but since this test operates in a bit of a
gray area and needed other changes, I went for a different fix. The gray
area this test operates in is the following: If the merge of a certain
file results in the same version of the file that existed in HEAD, but
there are dirty modifications to the file, is that an error with a
"Refusing to overwrite existing file" expected, or a case where the merge
should succeed since we shouldn't have to touch the dirty file anyway?
Recent discussion on the list leaned towards saying it should be a
success. Therefore, change the expected behavior of this test to match.
As a side effect, this makes the failed-due-to-hitting-add_cacheinfo-error
very clear, and we can mark the test as test_expect_failure. A subsequent
commit will implement the necessary changes to get this test to pass
again.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file on one side of history was renamed, and merely modified on the
other side, then applying a directory rename to the modified side gives us
a rename/rename(1to2) conflict. We should only apply directory renames to
pairs representing either adds or renames.
Making this change means that a directory rename testcase that was
previously reported as a rename/delete conflict will now be reported as a
modify/delete conflict.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a testcase showing spurious rename/rename(1to2) conflicts occurring
due to directory rename detection.
Also add a pair of testcases dealing with moving directory hierarchies
around that were suggested by Stefan Beller as "food for thought" during
his review of an earlier patch series, but which actually uncovered a
bug. Round things out with a test that is a cross between the two
testcases that showed existing bugs in order to make sure we aren't
merely addressing problems in isolation but in general.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit hooks together all the directory rename logic by making the
necessary changes to the rename struct, it's dst_entry, and the
diff_filepair under consideration.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
file level either. If there aren't any, then get the new name from
any directory renames.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git http-fetch" (deprecated) had an optional and experimental
"feature" to fetch only commits and/or trees, which nobody used.
This has been removed.
* ma/http-walker-no-partial:
walker: drop fields of `struct walker` which are always 1
http-fetch: make `-a` standard behaviour
Error messages from "git push" can be painted for more visibility.
* js/colored-push-errors:
config: document the settings to colorize push errors/hints
push: test to verify that push errors are colored
push: colorize errors
color: introduce support for colorizing stderr
"git gc --prune=nonsense" spent long time repacking and then
silently failed when underlying "git prune --expire=nonsense"
failed to parse its command line. This has been corrected.
* jc/parseopt-expiry-errors:
parseopt: handle malformed --expire arguments more nicely
gc: do not upcase error message shown with die()
"git fast-export" had a regression in v2.15.0 era where it skipped
some merge commits in certain cases, which has been corrected.
* ma/fast-export-skip-merge-fix:
fast-export: fix regression skipping some merge-commits
What is queued here is only the obviously correct and
uncontroversial code clean-up part, which is an earlier 7 patches,
of a larger series.
The remainder that is not queued introduces a few configuration
variables to deal with e-signature backends with different
signature format.
* bt/gpg-interface:
gpg-interface: find the last gpg signature line
gpg-interface: extract gpg line matching helper
gpg-interface: fix const-correctness of "eol" pointer
gpg-interface: use size_t for signature buffer size
gpg-interface: modernize function declarations
gpg-interface: handle bool user.signingkey
t7004: fix mistaken tag name
"git ls-remote" learned an option to allow sorting its output based
on the refnames being shown.
* hn/sort-ls-remote:
ls-remote: create '--sort' option
"git config --get" learned the "--default" option, to help the
calling script. Building on top of the tb/config-type topic, the
"git config" learns "--type=color" type. Taken together, you can
do things like "git config --get foo.color --default blue" and get
the ANSI color sequence for the color given to foo.color variable,
or "blue" if the variable does not exist.
* tb/config-default:
builtin/config: introduce `color` type specifier
config.c: introduce 'git_config_color' to parse ANSI colors
builtin/config: introduce `--default`
The "git config" command uses separate options e.g. "--int",
"--bool", etc. to specify what type the caller wants the value to
be interpreted as. A new "--type=<typename>" option has been
introduced, which would make it cleaner to define new types.
* tb/config-type:
builtin/config.c: support `--type=<type>` as preferred alias for `--<type>`
builtin/config.c: treat type specifiers singularly
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
The effort to pass the repository in-core structure throughout the
API continues. This round deals with the code that implements the
refs/replace/ mechanism.
* sb/object-store-replace:
replace-object: allow lookup_replace_object to handle arbitrary repositories
replace-object: allow do_lookup_replace_object to handle arbitrary repositories
replace-object: allow prepare_replace_object to handle arbitrary repositories
refs: allow for_each_replace_ref to handle arbitrary repositories
refs: store the main ref store inside the repository struct
replace-object: add repository argument to lookup_replace_object
replace-object: add repository argument to do_lookup_replace_object
replace-object: add repository argument to prepare_replace_object
refs: add repository argument to for_each_replace_ref
refs: add repository argument to get_main_ref_store
replace-object: check_replace_refs is safe in multi repo environment
replace-object: eliminate replace objects prepared flag
object-store: move lookup_replace_object to replace-object.h
replace-object: move replace_map to object store
replace_object: use oidmap
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
"git config --unset a.b", when "a.b" is the last variable in an
otherwise empty section "a", left an empty section "a" behind, and
worse yet, a subsequent "git config a.c value" did not reuse that
empty shell and instead created a new one. These have been
(partially) corrected.
* js/empty-config-section-fix:
git_config_set: reuse empty sections
git config --unset: remove empty sections (in the common case)
git_config_set: make use of the config parser's event stream
git_config_set: do not use a state machine
config_set_store: rename some fields for consistency
config: avoid using the global variable `store`
config: introduce an optional event stream while parsing
t1300: `--unset-all` can leave an empty section behind (bug)
t1300: add a few more hairy examples of sections becoming empty
t1300: remove unreasonable expectation from TODO
t1300: avoid relying on a bug
config --replace-all: avoid extra line breaks
t1300: demonstrate that --replace-all can "invent" newlines
t1300: rename it to reflect that `repo-config` was deprecated
git_config_set: fix off-by-two
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
A build-time option has been added to allow Git to be told to refer
to its associated files relative to the main binary, in the same
way that has been possible on Windows for quite some time, for
Linux, BSDs and Darwin.
* dj/runtime-prefix:
Makefile: quote $INSTLIBDIR when passing it to sed
Makefile: remove unused @@PERLLIBDIR@@ substitution variable
mingw/msvc: use the new-style RUNTIME_PREFIX helper
exec_cmd: provide a new-style RUNTIME_PREFIX helper for Windows
exec_cmd: RUNTIME_PREFIX on some POSIX systems
Makefile: add Perl runtime prefix support
Makefile: generate Perl header from template file
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call BUG(), we signal via SIGABRT that something bad happened,
dumping cores if so configured. In some setups these coredumps are
redirected to some central place such as /proc/sys/kernel/core_pattern,
which is a good thing.
However, when we try to verify in our test suite that bugs are caught in
certain code paths, we do *not* want to clutter such a central place
with unnecessary coredumps.
So let's special-case the test helpers (which we use to verify such code
paths) so that the BUG() calls will *not* call abort() but exit with a
special-purpose exit code instead.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this developer's earlier attempt to accelerate interactive rebases by
converting large parts from Unix shell script into portable, performant
C, the --root handling was specifically excluded (to simplify the task a
little bit; it still took over a year to get that reduced set of patches
into Git proper).
This patch ties up that loose end: now only --preserve-merges uses the
slow Unix shell script implementation to perform the interactive rebase.
As the rebase--helper reports progress to stderr (unlike the scripted
interactive rebase, which reports it to stdout, of all places), we have
to adjust a couple of tests that did not expect that for `git rebase -i
--root`.
This patch fixes -- at long last! -- the really old bug reported in
6a6bc5bdc4 (add tests for rebasing root, 2013-06-06) that rebasing with
--root *always* rewrote the root commit, even if there were no changes.
The bug still persists in --preserve-merges mode, of course, but that
mode will be deprecated as soon as the new --rebase-merges mode
stabilizes, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported by Wink Saville: when rebasing with no-rebase-cousins, we
will want to refrain from rebasing all of them, even when they are
root commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user provides a todo list containing something like
reset [new root]
merge my-branch
let's do the same as if pulling into an orphan branch: simply
fast-forward.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the context of the new --rebase-merges mode, which was designed
specifically to allow for changing the existing branch topology
liberally, a user may want to extract commits into a completely fresh
branch that starts with a newly-created root commit.
This is now possible by inserting the command `reset [new root]` before
`pick`ing the commit that wants to become a root commit. Example:
reset [new root]
pick 012345 a commit that is about to become a root commit
pick 234567 this commit will have the previous one as parent
This does not conflict with other uses of the `reset` command because
`[new root]` is not (part of) a valid ref name: both the opening bracket
as well as the space are illegal in ref names.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch-pack/upload-pack protocol v2 was developed independently of
the filter parameter (used in partial fetches), thus it did not include
support for it. Add support for the filter parameter.
Like in the legacy protocol, the server advertises and supports "filter"
only if uploadpack.allowfilter is configured.
Like in the legacy protocol, the client continues with a warning if
"--filter" is specified, but the server does not advertise it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upload-pack code paths never call git_config() with
upload_pack_config() when protocol v2 is used, causing options like
uploadpack.packobjectshook to not take effect. Ensure that this function
is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bisecting a performance regression using a config file,
`./bisect_regression --config my_perf.conf` for example, the
config file can contain Codespeed configuration which would
instruct the 'aggregate.perl' script called by the 'run'
script to output results in the Codespeed format and maybe
to try to send this output to a Codespeed server.
This is unfortunate because the 'bisect_run_script' relies
on the regular output from 'aggregate.perl' to mesure
performance, so let's disable Codespeed output and sending
results to a Codespeed server.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do something like
- git add .
- git status
- git commit
- git show (or git diff HEAD)
one would expect to have analogous output from git status and git show
(or similar diff-related programs). This is generally not the case, as
git status has hard coded values for diff related options.
With this commit the hard coded settings are dropped from the status
command in favour for values provided by git_diff_ui_config.
What follows are some remarks on the concrete options which were hard
coded in git status:
diffopt.detect_rename
Since the very beginning of git status in a3e870f2e2 ("Add "commit"
helper script", 2005-05-30), git status always used rename detection,
whereas with commands like show and log one had to activate it with a
command line option. After 5404c116aa ("diff: activate diff.renames by
default", 2016-02-25) the default behaves the same by coincidence, but
changing diff.renames to other values can break the consistency between
git status and other commands again. With this commit one control the
same default behaviour with diff.renames.
diffopt.rename_limit
Similarly one has the option diff.renamelimit to adjust this limit for
all commands but git status. With this commit git status will also honor
those.
diffopt.break_opt
Unlike the other two options this cannot be configured by a
configuration option yet. This commit will also change the default
behaviour to not use break rewrites. But as rename detection is most
likely on, this is dangerous to be activated anyway as one can see
here:
https://public-inbox.org/git/xmqqegqaahnh.fsf@gitster.dls.corp.google.com/
Signed-off-by: Eckhard S. Maaß <eckhard.s.maass@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of the recent addition of support for lazy loading functions[1]
on Windows to simplify the loading of NtSetSystemInformation.
[1] db2f7c48cb (Win32: simplify loading of DLL functions, 2017-09-25)
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo in an error message.
Also, this line was introduced in 3145ea957d ("upload-pack: introduce
fetch server command", 2018-03-15), which did not contain a test for the
case which causes this error to be printed, so introduce a test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
Convert the exclude_sha1 member of struct untracked_cache_dir and rename
it to exclude_oid. Eliminate several hard-coded integral constants, and
update a function name that referred to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust struct index_state to use struct object_id instead of unsigned
char [20].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the base_sha1 member of struct split_index to use struct
object_id and rename it base_oid. Include cache.h to make the structure
visible.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On HFS (which is the default Mac filesystem prior to High Sierra),
unicode names are "decomposed" before recording.
On APFS, which appears to be the new default filesystem in Mac OS High
Sierra, filenames are recorded as specified by the user.
APFS continues to allow the user to access it via any name
that normalizes to the same thing.
This difference causes t0050-filesystem.sh to fail two tests.
Improve the test for a NFD/NFC in test-lib.sh:
Test if the same file can be reached in pre- and decomposed unicode.
Reported-By: Elijah Newren <newren@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Tested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a series of fixup/squash commands, the interactive rebase builds
up a commit message with comments. This will be presented to the user in
the editor if at least one of those commands was a `squash`.
In any case, the commit message will be cleaned up eventually, removing
all those intermediate comments, in the final step of such a
fixup/squash chain.
However, if the last fixup/squash command in such a chain fails with
merge conflicts, and if the user then decides to skip it (or resolve it
to a clean worktree and then continue the rebase), the current code
fails to clean up the commit message.
This commit fixes that behavior.
The fix is quite a bit more involved than meets the eye because it is
not only about the question whether we are `git rebase --skip`ing a
fixup or squash. It is also about removing the skipped fixup/squash's
commit message from the accumulated commit message. And it is also about
the question whether we should let the user edit the final commit
message or not ("Was there a squash in the chain *that was not
skipped*?").
For example, in this case we will want to fix the commit message, but
not open it in an editor:
pick <- succeeds
fixup <- succeeds
squash <- fails, will be skipped
This is where the newly-introduced `current-fixups` file comes in real
handy. A quick look and we can determine whether there was a non-skipped
squash. We only need to make sure to keep it up to date with respect to
skipped fixup/squash commands. As a bonus, we can even avoid committing
unnecessarily, e.g. when there was only one fixup, and it failed, and
was skipped.
To fix only the bug where the final commit message was not cleaned up
properly, but without fixing the rest, would have been more complicated
than fixing it all in one go, hence this commit lumps together more than
a single concern.
For the same reason, this commit also adds a bit more to the existing
test case for the regression we just fixed.
The diff is best viewed with --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple fixup/squash commands are processed and the last one
causes merge conflicts and is skipped, we leave the "This is a
combination of ..." comments in the commit message.
Noticed by Eric Sunshine.
This regression test also demonstrates that we rely on the localized
version of
# This is a combination of <number> commits
to contain the <number> in ASCII, which breaks under GETTEXT_POISON.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
