In this function, we free the pointer we get from locate_in_PATH and
then check whether it's NULL. However, this is undefined behavior if
the pointer is non-NULL, since the C standard no longer permits us to
use a valid pointer after freeing it.
The only case in which the C standard would permit this to be defined
behavior is if r were NULL, since it states that in such a case "no
action occurs" as a result of calling free.
It's easy to suggest that this is not likely to be a problem, but we
know that GCC does aggressively exploit the fact that undefined
behavior can never occur to optimize and rewrite code, even when that's
contrary to the expectations of the programmer. It is, in fact, very
common for it to omit NULL pointer checks, just as we have here.
Since it's easy to fix, let's do so, and avoid a potential headache in
the future.
Noticed-by: Miriam R. <mirucam@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update accidentally squelched an error message when the
run_command API failed to run a missing command, which has been
corrected.
* jc/run-command-report-exec-failure-fix:
run-command: report exec failure
In 321fd823 ("run-command: mark path lookup errors with ENOENT",
2018-10-24), we rewrote the logic to execute a command by looking
in the directories on $PATH; as a side effect, a request to run a
command that is not found on $PATH is noticed even before a child
process is forked to execute it.
We however stopped to report an exec failure in such a case by
mistake. Add a logic to report the error unless silent-exec-failure
is requested, to match the original code.
Reported-by: John Passaro <john.a.passaro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codebase has been cleaned up to reduce "#ifndef NO_PTHREADS".
* nd/pthreads:
Clean up pthread_create() error handling
read-cache.c: initialize copy_len to shut up gcc 8
read-cache.c: reduce branching based on HAVE_THREADS
read-cache.c: remove #ifdef NO_PTHREADS
pack-objects: remove #ifdef NO_PTHREADS
preload-index.c: remove #ifdef NO_PTHREADS
grep: clean up num_threads handling
grep: remove #ifdef NO_PTHREADS
attr.c: remove #ifdef NO_PTHREADS
name-hash.c: remove #ifdef NO_PTHREADS
index-pack: remove #ifdef NO_PTHREADS
send-pack.c: move async's #ifdef NO_PTHREADS back to run-command.c
run-command.h: include thread-utils.h instead of pthread.h
thread-utils: macros to unconditionally compile pthreads API
Normally pthread_create() rarely fails. But with new pthreads wrapper,
pthread_create() will return ENOSYS on a system without thread support.
Threaded code _is_ protected by HAVE_THREADS and pthread_create()
should never run in the first place. But the situation could change in
the future and bugs may sneak in. Make sure that all pthread_create()
reports the error cause.
While at there, mark these strings for translation if they aren't.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems that do not support multithread, start_async() is
implemented with fork(). This implementation details unfortunately
leak out at least in send-pack.c [1].
To keep the code base clean of NO_PTHREADS, move the this #ifdef back
to run-command.c. The new wrapper function async_with_fork() at least
helps suggest that this special "close()" is related to async in fork
mode.
[1] 09c9957cf7 (send-pack: avoid deadlock when pack-object dies early
- 2011-04-25)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit e3a434468f (run-command: use the
async-signal-safe execv instead of execvp, 2017-04-19),
prepare_cmd() does its own PATH lookup for any commands we
run (on non-Windows platforms).
However, its logic does not match the old execvp call when
we fail to find a matching entry in the PATH. Instead of
feeding the name directly to execv, execvp would consider
that an ENOENT error. By continuing and passing the name
directly to execv, we effectively behave as if "." was
included at the end of the PATH. This can have confusing and
even dangerous results.
The fix itself is pretty straight-forward. There's a new
test in t0061 to cover this explicitly, and I've also added
a duplicate of the ENOENT test to ensure that we return the
correct errno for this case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The slightly misleading name die_bug() of the function intended to
report a bug is actually called always, and only reports a bug if the
passed-in parameter `err` is non-zero.
It uses die_errno() to report the bug, to helpfully include the error
message corresponding to `err`.
However, as these messages indicate bugs, we really should use BUG().
And as BUG() is a macro to be able to report the exact file and line
number, we need to convert die_bug() to a macro instead of only
replacing the die_errno() by a call to BUG().
While at it, use a name more indicative of the purpose: CHECK_BUG().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
Patch generated with Coccinelle and contrib/coccinelle/strbuf.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a command sets a new env variable GIT_DIR=.git, we need more context
to know where that '.git' is related to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally submodule code could execute new commands with GIT_DIR set
to some submodule. GIT_TRACE prints just the command line which makes it
hard to tell that it's not really executed on this repository.
Print the env delta (compared to parent environment) in this case.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We normally print full command line, including the program and its
argument. When git_cmd is set, we have a special code path to run the
right "git" program and child_process.argv[0] will not contain the
program name anymore. As a result, we print just the command
arguments.
I thought it was a regression when the code was refactored and git_cmd
added, but apparently it's not. git_cmd mode was introduced before
tracing was added in 8852f5d704 (run_command(): respect GIT_TRACE -
2008-07-07) so it's more like an oversight in 8852f5d704.
Fix it, print the program name "git" in git_cmd mode. It's nice to have
now. But it will be more important later when we start to print env
variables too, in shell syntax. The lack of a program name would look
confusing then.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the same as the old code that uses trace_argv_printf() in
run-command.c. This function will be improved in later patches to
print more information from struct child_process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro ALLOC_ARRAY to allocate an array. This is shorter and
easier, as it automatically infers the size of elements.
Patch generated with Coccinelle and contrib/coccinelle/array.cocci.
Signeg-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations run-command will incorrectly try (and fail) to
execute a directory instead of an executable file. This was observed by
having a directory called "ssh" in $PATH before the real ssh and trying
to use ssh protoccol, reslting in the following:
$ git ls-remote ssh://url
fatal: cannot exec 'ssh': Permission denied
It ends up being worse and run-command will even try to execute a
non-executable file if it preceeds the executable version of a file on
the PATH. For example, if PATH=~/bin1:~/bin2:~/bin3 and there exists a
directory 'git-hello' in 'bin1', a non-executable file 'git-hello' in
bin2 and an executable file 'git-hello' (which prints "Hello World!") in
bin3 the following will occur:
$ git hello
fatal: cannot exec 'git-hello': Permission denied
This is due to only checking 'access()' when locating an executable in
PATH, which doesn't distinguish between files and directories. Instead
use 'is_executable()' which check that the path is to a regular,
executable file. Now run-command won't try to execute the directory or
non-executable file 'git-hello':
$ git hello
Hello World!
which matches what execvp(3) would have done when asked to execute
git-hello with such a $PATH.
Reported-by: Brian Hatfield <bhatfield@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic for 'is_executable()' from help.c to run_command.c and
expose it so that callers from outside help.c can access the function.
This is to enable run-command to be able to query if a file is
executable in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers of the parent firing in the forked child may
have unintended side effects. Rather than auditing every signal
handler we have and will ever have, block signals while forking
and restore default signal handlers in the child before execve.
Restoring default signal handlers is required because
execve does not unblock signals, it only restores default
signal handlers. So we must restore them with sigprocmask
before execve, leaving a window when signal handlers
we control can fire in the child. Continue ignoring
ignored signals, but reset the rest to defaults.
Similarly, disable pthread cancellation to future-proof our code
in case we start using cancellation; as cancellation is
implemented with signals in glibc.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All non-Async-Signal-Safe functions (e.g. malloc and die) were removed
between 'fork' and 'exec' in start_command in order to avoid potential
deadlocking when forking while multiple threads are running. This
deadlocking is possible when a thread (other than the one forking) has
acquired a lock and didn't get around to releasing it before the fork.
This leaves the lock in a locked state in the resulting process with no
hope of it ever being released.
Add a note describing this potential pitfall before the call to 'fork()'
so people working in this section of the code know to only use
Async-Signal-Safe functions in the child process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our standard error handling paths have the potential to
call malloc or take stdio locks; so we must avoid them inside
the forked child.
Instead, the child only writes an 8 byte struct atomically to
the parent through the notification pipe to propagate an error.
All user-visible error reporting happens from the parent;
even avoiding functions like atexit(3) and exit(3).
Helped-by: Eric Wong <e@80x24.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to avoid allocation between 'fork()' and 'exec()' prepare the
environment to be used in the child process prior to forking.
Switch to using 'execve()' so that the construct child environment can
used in the exec'd process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the function used to exec from 'execvp()' to 'execv()' as the (p)
variant of exec isn't async-signal-safe and has the potential to call malloc
during the path resolution it performs. Instead we simply do the path
resolution ourselves during the preparation stage prior to forking. There also
don't exist any portable (p) variants which also take in an environment to use
in the exec'd process. This allows easy migration to using 'execve()' in a
future patch.
Also, as noted in [1], in the event of an ENOEXEC the (p) variants of
exec will attempt to execute the command by interpreting it with the
'sh' utility. To maintain this functionality, if 'execv()' fails with
ENOEXEC, start_command will atempt to execute the command by
interpreting it with 'sh'.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/exec.html
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to [1] we need to only call async-signal-safe operations between fork
and exec. Using malloc to build the argv array isn't async-signal-safe.
In order to avoid allocation between 'fork()' and 'exec()' prepare the
argv array used in the exec call prior to forking the process.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/fork.html
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of the run-command API may mark a child as
"clean_on_exit"; it gets added to a list and killed when the
main process dies. Since commit 46df6906f
(execv_dashed_external: wait for child on signal death,
2017-01-06), we respect an extra "wait_after_clean" flag,
which we expect to find in the child_process struct.
When Git is built with NO_PTHREADS, we start "struct
async" processes by forking rather than spawning a thread.
The resulting processes get added to the cleanup list but
they don't have a child_process struct, and the cleanup
function ends up dereferencing NULL.
We should notice this case and assume that the processes do
not need to be waited for (i.e., the same behavior they had
before 46df6906f).
Reported-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Names of the various hook scripts must be spelled exactly, but on
Windows, an .exe binary must be named with .exe suffix; notice
$GIT_DIR/hooks/<hookname>.exe as a valid <hookname> hook.
* js/mingw-hooks-with-exe-suffix:
mingw: allow hooks to be .exe files
Executable files in Windows need to have the extension '.exe', otherwise
they do not work. Extend the hooks to not just look at the hard coded
names, but also at the names extended by the custom STRIP_EXTENSION,
which is defined as '.exe' in Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you hit ^C to interrupt a git command going to a pager,
this usually leaves the pager running. But when a dashed
external is in use, the pager ends up in a funny state and
quits (but only after eating one more character from the
terminal!). This fixes it.
Explaining the reason will require a little background.
When git runs a pager, it's important for the git process to
hang around and wait for the pager to finish, even though it
has no more data to feed it. This is because git spawns the
pager as a child, and thus the git process is the session
leader on the terminal. After it dies, the pager will finish
its current read from the terminal (eating the one
character), and then get EIO trying to read again.
When you hit ^C, that sends SIGINT to git and to the pager,
and it's a similar situation. The pager ignores it, but the
git process needs to hang around until the pager is done. We
addressed that long ago in a3da882120 (pager: do
wait_for_pager on signal death, 2009-01-22).
But when you have a dashed external (or an alias pointing to
a builtin, which will re-exec git for the builtin), there's
an extra process in the mix. For instance, running:
$ git -c alias.l=log l
will end up with a process tree like:
git (parent)
\
git-log (child)
\
less (pager)
If you hit ^C, SIGINT goes to all of them. The pager ignores
it, and the child git process will end up in wait_for_pager().
But the parent git process will die, and the usual EIO
trouble happens.
So we really want the parent git process to wait_for_pager(),
but of course it doesn't know anything about the pager at
all, since it was started by the child. However, we can
have it wait on the git-log child, which in turn is waiting
on the pager. And that's what this patch does.
There are a few design decisions here worth explaining:
1. The new feature is attached to run-command's
clean_on_exit feature. Partly this is convenience,
since that feature already has a signal handler that
deals with child cleanup.
But it's also a meaningful connection. The main reason
that dashed externals use clean_on_exit is to bind the
two processes together. If somebody kills the parent
with a signal, we propagate that to the child (in this
instance with SIGINT, we do propagate but it doesn't
matter because the original signal went to the whole
process group). Likewise, we do not want the parent
to go away until the child has done so.
In a traditional Unix world, we'd probably accomplish
this binding by just having the parent execve() the
child directly. But since that doesn't work on Windows,
everything goes through run_command's more spawn-like
interface.
2. We do _not_ automatically waitpid() on any
clean_on_exit children. For dashed externals this makes
sense; we know that the parent is doing nothing but
waiting for the child to exit anyway. But with other
children, it's possible that the child, after getting
the signal, could be waiting on the parent to do
something (like closing a descriptor). If we were to
wait on such a child, we'd end up in a deadlock. So
this errs on the side of caution, and lets callers
enable the feature explicitly.
3. When we send children the cleanup signal, we send all
the signals first, before waiting on any children. This
is to avoid the case where one child might be waiting
on another one to exit, causing a deadlock. We inform
all of them that it's time to die before reaping any.
In practice, there is only ever one dashed external run
from a given process, so this doesn't matter much now.
But it future-proofs us if other callers start using
the wait_after_clean mechanism.
There's no automated test here, because it would end up racy
and unportable. But it's easy to reproduce the situation by
running the log command given above and hitting ^C.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some processes might want to perform cleanup tasks before Git kills them
due to the 'clean_on_exit' flag. Let's give them an interface for doing
this. The feature is used in a subsequent patch.
Please note, that the cleanup callback is not executed if Git dies of a
signal. The reason is that only "async-signal-safe" functions would be
allowed to be call in that case. Since we cannot control what functions
the callback will use, we will not support the case. See 507d7804 for
more details.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move check_pipe() to run_command and make it public. This is necessary
to call the function from pkt-line in a subsequent patch.
While at it, make async_exit() static to run_command.c as it is no
longer used from outside.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse --git-path hooks/<hook>" learned to take
core.hooksPath configuration variable (introduced during 2.9 cycle)
into account.
* ab/hooks:
rev-parse: respect core.hooksPath in --git-path
The idea of the --git-path option is not only to avoid having to
prefix paths with the output of --git-dir all the time, but also to
respect overrides for specific common paths inside the .git directory
(e.g. `git rev-parse --git-path objects` will report the value of the
environment variable GIT_OBJECT_DIRECTORY, if set).
When introducing the core.hooksPath setting, we forgot to adjust
git_path() accordingly. This patch fixes that.
While at it, revert the special-casing of core.hooksPath in
run-command.c, as it is now no longer needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have capture_command(), which captures the stdout
of a command in a way that avoids deadlocks. But sometimes
we need to do more I/O, like capturing stderr as well, or
sending data to stdin. It's easy to write code that
deadlocks racily in these situations depending on how fast
the command reads its input, or in which order it writes its
output.
Let's give callers an easy interface for doing this the
right way, similar to what capture_command() did for the
simple case.
The whole thing is backed by a generic poll() loop that can
feed an arbitrary number of buffers to descriptors, and fill
an arbitrary number of strbufs from other descriptors. This
seems like overkill, but the resulting code is actually a
bit cleaner than just handling the three descriptors
(because the output code for stdout/stderr is effectively
duplicated, so being able to loop is a benefit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" from a corrupt repository that attempts to push a large
number of refs deadlocked; the thread to relay rejection notices
for these ref updates blocked on writing them to the main thread,
after the main thread at the receiving end notices that the push
failed and decides not to read these notices and return a failure.
* jk/push-client-deadlock-fix:
t5504: drop sigpipe=ok from push tests
fetch-pack: isolate sigpipe in demuxer thread
send-pack: isolate sigpipe in demuxer thread
run-command: teach async threads to ignore SIGPIPE
send-pack: close demux pipe before finishing async process
Async processes can be implemented as separate forked
processes, or as threads (depending on the NO_PTHREADS
setting). In the latter case, if an async thread gets
SIGPIPE, it takes down the whole process. This is obviously
bad if the main process was not otherwise going to die, but
even if we were going to die, it means the main process does
not have a chance to report a useful error message.
There's also the small matter that forked async processes
will not take the main process down on a signal, meaning git
will behave differently depending on the NO_PTHREADS
setting.
This patch fixes it by adding a new flag to "struct async"
to block SIGPIPE just in the async thread. In theory, this
should always be on (which makes async threads behave more
like async processes), but we would first want to make sure
that each async process we spawn is careful about checking
return codes from write() and would not spew endlessly into
a dead pipe. So let's start with it as optional, and we can
enable it for specific sites in future patches.
The natural name for this option would be "ignore_sigpipe",
since that's what it does for the threaded case. But since
that name might imply that we are ignoring it in all cases
(including the separate-process one), let's call it
"isolate_sigpipe". What we are really asking for is
isolation. I.e., not to have our main process taken down by
signals spawned by the async process. How that is
implemented is up to the run-command code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
