In git-format-patch.txt, we were missing some key user information.
First of all, document the special value of `--base=auto`.
Next, while we're at it, surround option arguments with <> and change
existing names such as "Message-Id" to "message id", which conforms with
how existing documentation is written.
Finally, document the `format.outputDirectory` config and change
`format.coverletter` to use camel case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are two ways where the return codes of Git commands are
lost. The first way is when a command is in the upstream of a pipe. In a
pipe, only the return code of the last command is used. Thus, all other
commands will have their return codes masked. Rewrite pipes so that
there are no Git commands upstream.
The other way is when a command is in a non-assignment subshell. The
return code will be lost in favour of the surrounding command's. Rewrite
instances of this such that Git commands output to a file and
surrounding commands only call subshells with non-Git commands.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In check_threading(), there was a Git command in the upstream of a pipe.
In order to not lose its status code, it was saved into a file. However,
this may be confusing so rewrite to redirect IO to file. This allows us
to directly use the conventional &&-chain.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of `cnt=$(... | wc -l) && test $cnt = N` into uses
of `test_line_count()`.
While we're at it, convert one instance of a Git command upstream of a
pipe into two commands. This prevents a failure of a Git command from
being masked since only the return code of the last member of the pipe
is shown.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we were using a redirection operator to feed input into
sed. However, since sed is capable of opening its own files, make sed
open its own files instead of redirecting input into it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since output is silenced when running without `-v` and debugging output
is useful with `-v`, remove redirections to /dev/null as it is not
useful.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention is to use indentable here-docs within test cases so that
the here-docs line up with the rest of the code within the test case.
Change here-docs from `<<\EOF` to `<<-\EOF` so that they can be indented
along with the rest of the test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove these
spaces wherever they appear.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention is for test case names to be written between
single-quotes. Change all double-quoted test case names to single-quotes
except for one test case name that uses a sq for a contraction.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention for test cases is for the closing sq to be on its
own line. Move the sq onto its own line for cases that do not conform to
this style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For test cases, the usual convention is to name expected output files
"expect", not "expected". Replace all instances of "expected" with
"expect", except for one case where the "expected" is used as the name
of a test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few test scripts assign a single LF to $LF, but that is already
given by test-lib.sh to everybody.
Remove the unnecessary reassignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 554544276a (*.[ch]: remove extern from function declarations using
spatch, 2019-04-29), we removed externs from function declarations using
spatch but we intentionally excluded files under compat/ since some are
directly copied from an upstream and we should avoid churning them so
that manually merging future updates will be simpler.
In the last commit, we determined the files which taken from an upstream
so we can exclude them and run spatch on the remainder.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files compat/\*\*.{c,h} |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
$ git checkout -- \
compat/regex/ \
compat/inet_ntop.c \
compat/inet_pton.c \
compat/nedmalloc/ \
compat/obstack.{c,h} \
compat/poll/
Coccinelle has some trouble dealing with `__attribute__` and varargs so
we ran the following to ensure that no remaining changes were left
behind:
$ git ls-files compat/\*\*.{c,h} |
xargs sed -i'' -e 's/^\(\s*\)extern \([^(]*([^*]\)/\1\2/'
$ git checkout -- \
compat/regex/ \
compat/inet_ntop.c \
compat/inet_pton.c \
compat/nedmalloc/ \
compat/obstack.{c,h} \
compat/poll/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running Coccinelle on all sources inside compat/ that were created
by us[1], it was found that compat/mingw.c violated an array.cocci rule
in two places and, thus, a patch was generated. Apply this patch so that
all compat/ sources created by us follows all cocci rules.
[1]: Do not run Coccinelle on files that are taken from some upstream
because in case we need to pull updates from them, we would like to have
diverged as little as possible in order to make merging updates simpler.
The following sources were determined to have been taken from some
upstream:
* compat/regex/
* compat/inet_ntop.c
* compat/inet_pton.c
* compat/nedmalloc/
* compat/obstack.{c,h}
* compat/poll/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export and fast-import can easily handle the simple rewrite that
was being done by filter-branch, and should be faster on systems with a
slow fork. Measuring the overall time taken for all of t3427 (not just
the difference between filter-branch and fast-export/fast-import) shows
a speedup of about 5% on Linux and 11% on Mac.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, it is possible to embed additional metadata into an
executable by linking in a "manifest", i.e. an XML document that
describes capabilities and requirements (such as minimum or maximum
Windows version). These XML documents are expected to be stored in
`.manifest` files.
At least _some_ Visual Studio versions auto-generate `.manifest` files
when none is specified explicitly, therefore we used to ask Git to
ignore them.
However, we do have a beautiful `.manifest` file now:
`compat/win32/git.manifest`, so neither does Visual Studio auto-generate
a manifest for us, nor do we want Git to ignore the `.manifest` files
anymore.
Further reading on auto-generated `.manifest` files:
https://docs.microsoft.com/en-us/cpp/build/manifest-generation-in-visual-studio
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying multiple patches with git am, or when rebasing using the
am backend, it's possible that one of our patches has updated a
gitattributes file. Currently, we cache this information, so if a
file in a subsequent patch has attributes applied, the file will be
written out with the attributes in place as of the time we started the
rebase or am operation, not with the attributes applied by the previous
patch. This problem does not occur when using the -m or -i flags to
rebase.
To ensure we write the correct data into the working tree, expire the
cache after each patch that touches a path ending in ".gitattributes".
Since we load these attributes in multiple separate files, we must
expire them accordingly.
Verify that both the am and rebase code paths work correctly, including
the conflict marker size with am -3.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce code duplication by turning parse_tree_indirect() into a wrapper
of repo_peel_to_type(). This avoids a segfault when handling a broken
tag where ->tagged is NULL. The new version also checks the return
value of parse_object() that was ignored by the old one.
Initial-patch-by: Stefan Sperling <stsp@stsp.name>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushes with --all, or refspecs are disallowed when --mirror is given
to 'git push', or when 'remote.<name>.mirror' is set in the config of
the repository, because they can have surprising
effects. 800a4ab399 ("push: check for errors earlier", 2018-05-16)
refactored this code to do that check earlier, so we can explicitly
check for the presence of flags, instead of their sideeffects.
However when 'remote.<name>.mirror' is set in the config, the
TRANSPORT_PUSH_MIRROR flag would only be set after we calling
'do_push()', so the checks would miss it entirely.
This leads to surprises for users [*1*].
Fix this by making sure we set the flag (if appropriate) before
checking for compatibility of the various options.
*1*: https://twitter.com/FiloSottile/status/1163918701462249472
Reported-by: Filippo Valsorda <filippo@ml.filippo.io>
Helped-by: Saleem Rashid
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discovered on the mailing list, some of the descriptions of the
ff-related options were unclear. Try to be more precise with what these
options do.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Announce that calling help_unknown_ref() exits the program.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git switch' command was created to separate half of the
behavior of 'git checkout'. It specifically has the mode to
do nothing with the index and working directory if the user
only specifies to create a new branch and change HEAD to that
branch. This is also the behavior most users expect from
'git checkout -b', but for historical reasons it also performs
an index update by scanning the working directory. This can be
slow for even moderately-sized repos.
A performance fix for 'git checkout -b' was introduced by
fa655d8411 (checkout: optimize "git checkout -b <new_branch>"
2018-08-16). That change includes details about the config
setting checkout.optimizeNewBranch when the sparse-checkout
feature is required. The way this change detected if this
behavior change is safe was through the skip_merge_working_tree()
method. This method was complex and needed to be updated
as new options were introduced.
This behavior was essentially reverted by 65f099b ("switch:
no worktree status unless real branch switch happens"
2019-03-29). Instead, two members of the checkout_opts struct
were used to distinguish between 'git checkout' and 'git switch':
* switch_branch_doing_nothing_is_ok
* only_merge_on_switching_branches
These settings have opposite values depending on if we start
in cmd_checkout or cmd_switch.
The message for 64f099b includes "Users of big repos are
encouraged to move to switch." Making this change while
'git switch' is still experimental is too aggressive.
Create a happy medium between these two options by making
'git checkout -b <branch>' behave just like 'git switch',
but only if we read exactly those arguments. This must
be done in cmd_checkout to avoid the arguments being
consumed by the option parsing logic.
This differs from the previous change by fa644d8 in that
the config option checkout.optimizeNewBranch remains
deleted. This means that 'git checkout -b' will ignore
the index merge even if we have a sparse-checkout file.
While this is a behavior change for 'git checkout -b',
it matches the behavior of 'git switch -c'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes gitk look for http or https URLs in the commit description
and make the URLs clickable. Clicking on them will invoke an external
web browser with the URL.
The web browser command is by default "xdg-open" on Linux, "open" on
MacOS, and "cmd /c start" on Windows. The command can be changed in
the preferences window, and it can include parameters as well as the
command name. If it is set to the empty string then URLs will no
longer be made clickable.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Accidental clicks on the revert hunk/lines buttons can cause loss of
work, and can be frustrating. So, allow undoing the last revert.
Right now, a stack or deque are not being used for the sake of
simplicity, so only one undo is possible. Any reverts before the
previous one are lost.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests rebasing a linear branch topology to linear rebase tests
added in 2aad7cace2 ("add simple tests of consistency across rebase
types", 2013-06-06).
These tests are duplicates of two surrounding tests that do the same
with tags pointing to the same objects. Right now there's no change in
behavior being introduced, but as we'll see in a subsequent change
rebase can have different behaviors when working implicitly with
remote tracking branches.
While I'm at it add a --fork-point test, strictly speaking this is
redundant to the existing '' test, as no argument to rebase implies
--fork-point. But now it's easier to grep for tests that explicitly
stress --fork-point.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we rebased with a --fork-point invocation where the
fork-point wasn't empty, we would be setting options.restrict_revision.
The fast-forward logic would automatically declare that the rebase was
not fast-forwardable if it was set. However, this was painting with a
very broad brush.
Refine the logic so that we can fast-forward in the case where the
restricted revision is equal to the merge base, since we stop rebasing
at the merge base anyway.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, can_fast_forward was written with an if-else statement. However,
in the future, we may be adding more termination cases which would lead
to deeply nested if statements.
Refactor to use a goto tower so that future cases can be easily
inserted.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more stress tests for the can_fast_forward() case in
rebase.c. These tests are getting rather verbose, but now we can see
under --ff and --no-ff whether we skip work, or whether we're forced
to run the rebase.
These tests aren't supposed to endorse the status quo, just test for
what we're currently doing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import's read_next_command() has somewhat odd memory ownership
semantics for the command_buf strbuf. After reading a command, we copy
the strbuf's pointer (without duplicating the string) into our cmd_hist
array of recent commands. And then when we're about to read a new
command, we clear the strbuf by calling strbuf_detach(), dropping
ownership from the strbuf (leaving the cmd_hist reference as the
remaining owner).
This has a few surprising implications:
- if the strbuf hasn't been copied into cmd_hist (e.g., because we
haven't ready any commands yet), then the strbuf_detach() will leak
the resulting string
- any modification to command_buf risks invalidating the pointer held
by cmd_hist. There doesn't seem to be any way to trigger this
currently (since we tend to modify it only by detaching and reading
in a new value), but it's subtly dangerous.
- any pointers into an input string will remain valid as long as
cmd_hist points to them. So in general, you can point into
command_buf.buf and call read_next_command() up to 100 times before
your string is cycled out and freed, leaving you with a dangling
pointer. This makes it easy to miss bugs during testing, as they
might trigger only for a sufficiently large commit (e.g., the bug
fixed in the previous commit).
Instead, let's make a new string to copy the command into the history
array, rather than having dual ownership with the old. Then we can drop
the strbuf_detach() calls entirely, and just reuse the same buffer
within command_buf over and over. We'd normally have to strbuf_reset()
it before using it again, but in both cases here we're using
strbuf_getline(), which does it automatically for us.
This fixes the leak, and it means that even a single call to
read_next_command() will invalidate any held pointers, making it easier
to find bugs. In fact, we can drop the extra input lines added to the
test case by the previous commit, as the unfixed bug would now trigger
just from reading the commit message, even without any modified files in
the commit.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read each line of the fast-import stream into the command_buf strbuf.
When reading a commit, we parse a line like "encoding foo" by storing a
pointer to "foo", but not making a copy. We may then read an unbounded
number of other lines (e.g., one for each modified file in the commit),
each of which writes into command_buf.
This works out in practice for small cases, because we hand off
ownership of the heap buffer from command_buf to the cmd_hist array, and
read new commands into a fresh heap buffer. And thus the pointer to
"foo" remains valid as long as there aren't so many intermediate lines
that we end up dropping the original "encoding" line from the history.
But as the test modification shows, if we go over our default of 100
lines, we end up with our encoding string pointing into freed heap
memory. This seems to fail reliably by writing garbage into the output,
but running under ASan definitely detects this as a use-after-free.
We can fix it by duplicating the encoding value, just as we do for other
parsed lines (e.g., an author line ends up in parse_ident, which copies
it to a new string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reverting or cherry-picking, one of the options we can pass the
sequencer is `--skip`. However, unlike rebasing, `--skip` is not
mentioned as a possible option in the status message. Mention it so that
users are more aware of their options.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though `--skip` is a valid command-line option for cherry-pick and
revert while they are in progress, it is not completed. Add this missing
option to the completion script.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since revert and cherry-pick share the same sequencer code, they should
both accept the same command-line options. Derive the
`__git_cherry_pick_inprogress_options` and
`__git_revert_inprogress_options` variables from
`__git_sequencer_inprogress_options` so that the options aren't
unnecessarily duplicated twice.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "same head" introduced in the preceding commit to check whether
the rebase.c code lands in the can_fast_forward() case in, and thus
prints out an "is up to date" and aborts early.
In some of these cases we make it past that and to "rewinding head",
then do a rebase, only to find out there's nothing to change so HEAD
stays at the same OID.
These tests presumed these two cases were the same thing. In terms of
where HEAD ends up they are, but we're not only interested in rebase
semantics, but also whether or not we're needlessly doing work when we
could avoid it entirely.
I'm adding "same" and "diff" here because I'll follow-up and add
--no-ff tests, where some of those will be "diff"-erent, so add the
"diff" code already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase is run on a branch that can be fast-forwarded, this should
automatically be done. Create test to ensure this behavior happens.
There are some cases that currently don't pass. The first case is where
a feature and master have diverged, running
"git rebase master... master" causes a full rebase to happen even though
a fast-forward should happen.
The second case is when we are doing "git rebase --fork-point" and a
fork-point commit is found. Once again, a full rebase happens even
though a fast-forward should happen.
Mark these cases as failure so we can fix it later.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clean -fd' must not delete an untracked directory if it belongs
to a different Git repository or worktree. Unfortunately, if a
'.gitignore' rule in the outer repository happens to match a file in a
nested repository or worktree, then something goes awry and 'git clean
-fd' does delete the content of the nested repository's worktree
except that ignored file, potentially leading to data loss.
Add a test to 't7300-clean.sh' to demonstrate this breakage.
This issue is a regression introduced in 6b1db43109 (clean: teach
clean -d to preserve ignored paths, 2017-05-23).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let warning() format the message instead of using an intermediate strbuf
for that. This is shorter, easier to read and avoids an allocation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Append the strbuf buffer only after detaching it. There is no practical
difference here, as the strbuf is not empty and no strbuf_ function is
called between storing the pointer to the still attached buffer and
calling strbuf_detach(), so that pointer is valid, but make sure to
follow the standard sequence anyway for consistency.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_detach() has been returning a pointer to a buffer even for empty
strbufs since 08ad56f3f0 ("strbuf: always return a non-NULL value from
strbuf_detach", 2012-10-18). Use that feature in show_log() instead of
having it handle empty strbufs specially.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index field in the commit object is used to find the buffer
corresponding to that commit in the buffer_slab. Resetting it first
means free_commit_buffer is not going to free the right buffer.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function to strip the path suffix from a commit, but we don't
have one to check for a path suffix. For a plain filename, we can use
basename, but that requires an allocation, since POSIX allows it to
modify its argument. Refactor strip_path_suffix into a helper function
and a new function, ends_with_path_components, to meet this need.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cc8fdaee1e (banned.h: mark sprintf() as banned, 2018-07-24), both
'sprintf()' and 'vsprintf()' were marked as banned functions. The
non-variadic macro to ban 'vsprintf' has a typo which says that
'sprintf', not 'vsprintf' is banned. The variadic version does not have
the same typo.
Fix this by updating the explicit form of 'vsprintf' as the banned
version of itself, not 'sprintf'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
