- Make citool return nonzero exit code if it did not commit.
- Add a mode where it does not actually commit and simply
exits with zero code. Commit message is either disabled,
or simply dumped to GITGUI_EDITMSG before exiting.
- Add an option to immediately start it in amend mode.
Rationale:
1) Use 'git citool --nocommit' instead of mergetool in scripts.
2) Use 'git citool --amend' to edit commits while rebasing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
apply_stash() and show_stash() each call rev-parse with
'--default refs/stash' as an argument. This option causes rev-parse to
operate on refs/stash if it is not able to successfully operate on any
element of the command line. This includes failure to supply a "valid"
revision. This has the effect of causing 'stash apply' and 'stash show'
to operate as if stash@{0} had been supplied when an invalid revision is
supplied.
e.g. 'git stash apply stash@{1}' would fall back to
'git stash apply stash@{0}'
This patch modifies these two functions so that they avoid using the
--default option of rev-parse.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Generally, the dependent clause "for example" is suffixed with a comma.
Used present tense where appropriate to be consistent with the other
paragraphs.
Rewrote the paragraph in the second hunk to be more clear.
Signed-off-by: Garry Dolley <gdolley@ucla.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As the testcase demonstrates, it's possible for split_cmdline to return -1 and
deallocate any memory it's allocated, if the config string is missing an end
quote. In both the cases below, which are the only calling sites, the return
isn't checked, and using the pointer causes a pretty immediate segfault.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
[jc: fixes bibtex pattern breakage exposed by this test]
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A comment on top of create_tmpfile() describes caveats ('can have
problems on various systems (FAT, NFS, Coda)') that should apply
in this situation as well. This in the end did not end up solving
any of my personal problems, but it might be a useful cleanup patch
nevertheless.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote show' substituted the remote name into a string that was later
used as a printf format string. If a remote name contains a printf format
specifier like this:
$ git remote add foo%sbar .
then the command
$ git remote show foo%sbar
would print garbage (if you are lucky) or crash. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes "git remote -v" and "git remote show" report multiple URLs
rather than warn about them. Multiple URLs are OK for pushing into
multiple repos simultaneously. Without "-v" each repo is shown once only.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose you're using git-svn to work with a certain SVN repository.
Since you don't like 'git-svn fetch' to take forever, and you don't want
to accidentally interrupt it and end up corrupting your repository, you
set up a remote Git repository to mirror the SVN repository, which does
its own 'git-svn fetch' on a cronjob; now you can 'git-fetch' from the
Git mirror into your local repository, and still dcommit to SVN when you
have changes to push.
After you do this, though, git-svn will get very confused if you ever
try to do 'git-svn fetch' in your local repository again, since its
rev_map will differ from the branch's head, and it will be unable to
fetch new commits from SVN because of the metadata conflict. But all
the necessary metadata are there in the Git commit message; git-svn
already knows how to rebuild rev_map files that get blown away, by
using the metadata.
This patch teaches git-svn do a partial rebuild of the rev_map to
match the true state of the branch, if it ever is used to fetch again.
This will only work for projects not using either noMetadata or
useSvmProps configuration options; if you are using these options,
git-svn will fall back to the previous behaviour.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: use expect_failure to mark the test to expose existing breakage]
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch" auto-follows tags, it should not download excess ones.
This new test makes sure that condition.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you fail to update refs to change branches in checkout, your index
and working tree are left already updated. We don't have an easy way
to undo this, but at least we can check things that would make the
creation of a new branch fail. These checks were in the shell version,
and were lost in the C conversion.
The messages are from the shell version, and should probably be made nicer.
[jc: added test to t7201]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple regular expressions are concatenated with "\n", they were
traditionally AND'ed together, and only a line that matches _all_ of them
is taken as a match. This however is unwieldy when multiple regexp
feature is used to specify alternatives.
This fixes the semantics to take the first match. A nagative pattern, if
matches, makes the line to fail as before. A match with a positive
pattern will be the final match, and what it captures in $1 is used as the
hunk header comment.
We could write alternatives using "|" in ERE, but the machinery can only
use captured $1 as the hunk header comment (or $0 if there is no match in
$1), so you cannot write:
"junk ( A | B ) | garbage ( C | D )"
and expect both "junk" and "garbage" to get stripped with the existing
code. With this fix, you can write it as:
"junk ( A | B ) \n garbage ( C | D )"
and the way capture works would match the user expectation more
naturally.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using ERE elements such as "|" (alternation) by backquoting in BRE
is a GNU extension and should not be done in portable programs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using ERE elements such as "|" (alternation) by backquoting in BRE
is a GNU extension and should not be done in portable programs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This concept was retired by 77882f6 (Retire diffcore-pathspec.,
2006-04-10), more than 2 years ago.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using this format simplifies the code for completing refs and (in some
cases) improves performance significantly.
For repositories like the current git.git (with more than 200 refs)
there is no real performance difference, but for a repository with 2000
refs the total time needed to complete the refs is reduced by ~25% (from
around 400ms to around 305ms).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-diff-hunk-header-fix:
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Cosmetical command name fix
Start conforming code to "git subcmd" style part 3
t9700/test.pl: remove File::Temp requirement
t9700/test.pl: avoid bareword 'STDERR' in 3-argument open()
GIT 1.6.0.2
Fix some manual typos.
Use compatibility regex library also on FreeBSD
Use compatibility regex library also on AIX
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
Start conforming code to "git subcmd" style part 2
diff: Help "less" hide ^M from the output
checkout: do not check out unmerged higher stages randomly
Conflicts:
Documentation/git.txt
Documentation/gitattributes.txt
Makefile
diff.c
t/t7201-co.sh
* maint:
sha1_file: link() returns -1 on failure, not errno
Make git archive respect core.autocrlf when creating zip format archives
Add new test to demonstrate git archive core.autocrlf inconsistency
gitweb: avoid warnings for commits without body
Clarified gitattributes documentation regarding custom hunk header.
git-svn: fix handling of even funkier branch names
git-svn: Always create a new RA when calling do_switch for svn://
git-svn: factor out svnserve test code for later use
diff/diff-files: do not use --cc too aggressively
* rs/decorate:
add '%d' pretty format specifier to show decoration
move load_ref_decorations() to log-tree.c and export it
log: add load_ref_decorations()
* cc/bisect:
bisect: remove "checkout_done" variable used when checking merge bases
bisect: only check merge bases when needed
bisect: test merge base if good rev is not an ancestor of bad rev
Currently, the hunk headers produced by 'diff -p' are customizable by
setting the diff.*.funcname option in the config file. The 'funcname' option
takes a basic regular expression. This functionality was designed using the
GNU regex library which, by default, allows using backslashed versions of
some extended regular expression operators, even in Basic Regular Expression
mode. For example, the following characters, when backslashed, are
interpreted according to the extended regular expression rules: ?, +, and |.
As such, the builtin funcname patterns were created using some extended
regular expression operators.
Other platforms which adhere more strictly to the POSIX spec do not
interpret the backslashed extended RE operators in Basic Regular Expression
mode. This causes the pattern matching for the builtin funcname patterns to
fail on those platforms.
Introduce a new option 'xfuncname' which uses extended regular expressions,
and advertise it _instead_ of funcname. Since most users are on GNU
platforms, the majority of funcname patterns are created and tested there.
Advertising only xfuncname should help to avoid the creation of non-portable
patterns which work with GNU regex but not elsewhere.
Additionally, the extended regular expressions may be less ugly and
complicated compared to the basic RE since many common special operators do
not need to be backslashed.
For example, the GNU Basic RE:
^[ ]*\\(\\(public\\|static\\).*\\)$
becomes the following Extended RE:
^[ ]*((public|static).*)$
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for allowing extended regular expression patterns.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for associating a flag with each pattern which will
control how the pattern is interpreted. For example, as a basic or extended
regular expression.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
