Amazingly, timegm(gmtime(0)) is only 0 before 2020 because perl's
timegm deviates from GNU timegm(3) in how it handles years.
man Time::Local says
Whenever possible, use an absolute four digit year instead.
with a detailed explanation about ambiguity of 2-digit years above that.
Even though this ambiguity is error-prone with >50% of users getting it
wrong, it has been like this for 20+ years, so we just use 4-digit years
everywhere to be on the safe side.
We add some extra logic to cvsimport because it allows 2-digit year
input and interpreting an 18 as 1918 can be avoided easily and safely.
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
We used to have two versions of the email parsing code. Our
parse_mailboxes (in Git.pm), and Mail::Address which we used if
installed. Unfortunately, both versions have different sets of bugs, and
changing the behavior of git depending on whether Mail::Address is
installed was a bad idea.
A first attempt to solve this was cc90750 (send-email: don't use
Mail::Address, even if available, 2017-08-23), but it turns out our
parse_mailboxes is too buggy for some uses. For example the lack of
nested comments support breaks get_maintainer.pl in the Linux kernel
tree:
https://public-inbox.org/git/20171116154814.23785-1-alex.bennee@linaro.org/
This patch goes the other way: use Mail::Address anyway, but have a
local copy from CPAN as a fallback, when the system one is not
available.
The duplicated script is small (276 lines of code) and stable in time.
Maintaining the local copy should not be an issue, and will certainly be
less burden than maintaining our own parse_mailboxes.
Another option would be to consider Mail::Address as a hard dependency,
but it's easy enough to save the trouble of extra-dependency to the end
user or packager.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous round tried to use *.pmc files but it confused RPM
dependency analysis on some distros. Install them as plain
vanilla *.pm files instead.
Also "local @_" construct did not properly work when goto &sub
is used until recent versions of Perl. Avoid it (and we do not
need to localize it here anyway).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code is more understandable with 'if' instead of 'unless'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function calls itself "required", but it does not die when it
sees an unexpected EOF.
Let's rename it to "packet_key_val_read()".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And while at it let's simplify t0021/rot13-filter.pl by
using Git/Packet.pm.
This will make it possible to reuse packet related
functions in other test scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
In parse_svn_date() prepend the correct UTC offset to the timestamp
returned. This is the offset in effect at the commit time instead of
the offset in effect at calling time.
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Reviewed-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Porcelain scripts written in Perl are getting internationalized.
* va/i18n-perl-scripts:
i18n: difftool: mark warnings for translation
i18n: send-email: mark composing message for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark strings for translation
i18n: add--interactive: mark status words for translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark edit_hunk_manually message for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: mark plural strings
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark strings with interpolation for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings for translation
Git.pm: add subroutines for commenting lines
This brings git-svn refname escaping up-to-date with
commit a4c2e69936
("Disallow '\' in ref names") from May 2009.
Reported-by: Michael Fladischer <michael@fladi.at>
Message-ID: <cb8cd9b1-9882-64d2-435d-40d0b2b82d59@fladi.at>
Signed-off-by: Eric Wong <e@80x24.org>
Mark prompt message assembled in place for translation, unfolding each
use case for each entry in the %patch_modes hash table.
Previously, this script relied on whether $patch_mode was set to run the
command patch_update_cmd() or show status and loop the main loop. Now,
it uses $cmd to indicate we must run patch_update_cmd() and $patch_mode
is used to tell which flavor of the %patch_modes are we on. This is
introduced in order to be able to mark and unfold the message prompt
knowing in which context we are.
The tracking of context was done previously by point %patch_mode_flavour
hash table to the correct entry of %patch_modes, focusing only on value
of %patch_modes. Now, we are also interested in the key ('staged',
'stash', 'checkout_head', ...).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark plural strings for translation. Unfold each action case in one
entire sentence.
Pass new keyword for xgettext to extract.
Update test to include new subroutine __n() for plural strings handling.
Update documentation to include a description of the new __n()
subroutine.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blindly checking a path component for falsiness is unwise, as
"0" is false to Perl, but a valid pathname component for SVN
(or any filesystem).
Found via random code reading.
Signed-off-by: Eric Wong <e@80x24.org>
Reusing cached data speeds up git-svn by quite a fair bit. However, if
the YAML module is unavailable, the caches are written to disk in an
architecture-dependent manner. That leads to problems when upgrading,
say, from 32-bit to 64-bit Git for Windows.
Let's just try to read those caches back if we detect the absence of the
YAML module and the presence of the file, and delete the file if it
could not be read back correctly.
Note that the only way to catch the error when the memoized cache could
not be read back is to put the call inside an `eval { ... }` block
because it would die otherwise; the `eval` block should also return `1`
in case of success explicitly since the function reading back the cached
data does not return an appropriate value to test for success.
This fixes https://github.com/git-for-windows/git/issues/233.
[ew: import "retrieve" explictly, check unlink result]
Signed-off-by: Gavin Lambert <github@mirality.co.nz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Eric Wong <e@80x24.org>
git-svn internals were previously not aware of repository
layout differences for users of the "git worktree" command.
Introduce this awareness by using "git rev-parse --git-path"
instead of relying on outdated uses of GIT_DIR and friends.
Thanks-to: Duy Nguyen <pclouds@gmail.com>
Reported-by: Mathieu Arnold <mat@freebsd.org>
Signed-off-by: Eric Wong <e@80x24.org>
Reducing the scope of where we change the record separator ($/)
avoids bugs in calls which rely on the input record separator
further down, such as the 'chomp' usage in command_oneline.
This is necessary for a future change to git-svn, but exists in
Git.pm since it seems useful for gitweb and our other Perl
scripts, too.
Signed-off-by: Eric Wong <e@80x24.org>
It is possible to have refs globbed by git-svn which stores data
purely in git; gently skip those instead of dying and assuming
user error.
ref: http://mid.gmane.org/CALi1mtdtNF_GtzyPTbfb7N51wwxsFY7zm8hsgwxr3tHcZZboyg@mail.gmail.com
Suggested-by: Jacob Godserv <jacobgodserv@gmail.com>
Cc: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For repositories without parent following enabled, finding
git parents through svn:mergeinfo or svk::parents can be
expensive and pointless.
Reported-by: Александр Овчинников <proff@proff.email>
http://mid.gmane.org/4094761466408188@web24o.yandex.ru
Signed-off-by: Eric Wong <e@80x24.org>
Error messages should attempt to fit within the confines of
an 80-column terminal to avoid compatibility and accessibility
problems. Furthermore the word "directories" can be misleading
when used in the context of git refnames.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Expand the area of globs applicability for branches and tags
in git-svn. It is now possible to use globs like 'a*e', or 'release_*'.
This allows users to avoid long lines in config like:
branches = branches/{release_20,release_21,release_22,...}
In favor of:
branches = branches/release_*
[ew: amended commit message, minor formatting and style fixes]
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The conversion from "svn.pathnameencoding" to UTF-8 should be applied
first, and then URL encoding should be applied on the resulting UTF-8
path. The reversed order of these transforms (used before this fix)
makes non-UTF-8 URL which causes error from Subversion such as
"Filesystem has no item: '...' path not found" when sending a rename (or
a copy) from non-ASCII path.
[ew: t9115 test case added (requires SVN_HTTPD_PORT set to test),
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Without the initialization of $self->{pathnameencoding}, conversion in
repo_path() is always skipped as $self->{pathnameencoding} is undefined
even if "svn.pathnameencoding" is configured.
The lack of conversion results in mysterious failure of dcommit (e.g.
"Malformed XML") which happen only when a commit involves a change on
non-ASCII path.
[ew: add test case to t9115,
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For users with "store-passwords = no" set in the "[auth]" section of
their ~/.subversion/config, SVN 1.9.0+ would fail with the
following message when attempting to call svn_auth_set_parameter:
Value is not a string (or undef) at Git/SVN/Ra.pm
Ironically, this breakage was caused by r1553823 in subversion:
"Make svn_auth_set_parameter() usable from Perl bindings."
Since 2007 (602015e0e6), git-svn has used a workaround to make
svn_auth_set_parameter usable internally. However this workaround
breaks under SVN 1.9+, which deals properly with the type mapping
and fails to recognize our workaround.
For pre-1.9.0 SVN, we continue to use the existing workaround for
the lack of proper type mapping in the bindings.
Tested under subversion 1.6.17 and 1.9.3.
I've also verified r1553823 was not backported to SVN 1.8.x:
BRANCH=http://svn.apache.org/repos/asf/subversion/branches/1.8.x
svn log -v $BRANCH/subversion/bindings/swig/core.i
ref: https://bugs.debian.org/797705
Cc: 797705@bugs.debian.org
Reported-by: Thierry Vignaud <thierry.vignaud@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested-by: Thierry Vignaud <thierry.vignaud@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Processing empty_dir directives becomes extremely slow for svn
repositories with a large enough history.
This is due to using a single hash to store the list of empty
directories, with the expensive step being purging items from
that hash using grep+delete.
Storing directories in a hash of hashes improves the performance
of this purge step and removes a potentially lengthy delay after
every rebase/mkdirs command.
The svn repository with this behaviour has 110K commits with
unhandled.log containing 170K empty_dir directives.
This takes 10 minutes to process when using a single hash, vs
3 seconds with a hash of hashes.
Signed-off-by: Dair Grant <dair@feralinteractive.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since b19138b (git-svn: Make it incrementally faster by minimizing temp
files, v1.6.0), git-svn has been using the Git.pm temp_acquire and
temp_release mechanism to avoid unnecessary temp file churn and provide
a speed boost.
However, that change introduced a call to temp_acquire inside the
Git::SVN::Fetcher::close_file function for an 'svn_hash' temp file.
Because an SVN::Pool is active at the time this function is called, if
the Git::temp_acquire function ends up actually creating a new
FileHandle for the temp file (which it will the first time it's called
with the name 'svn_hash') that FileHandle will end up in the SVN::Pool
and should that pool have SVN::Pool::clear called on it that FileHandle
will be closed out from under Git::temp_acquire.
Since the only call site to Git::temp_acquire with the name 'svn_hash'
is inside the close_file function, if an 'svn_hash' temp file is ever
created its FileHandle is guaranteed to be created in the active
SVN::Pool.
This has not been a problem in the past because the SVN::Pool was not
being cleared. However, since dfa72fdb (git-svn: reload RA every
log-window-size, v2.2.0) the pool has been getting cleared periodically
at which point the FileHandle for the 'svn_hash' temp file gets closed.
Any subsequent calls to Git::temp_acquire for 'svn_hash', however,
succeed without creating/opening a new temporary file since it still has
the now invalid FileHandle in its cache. Callers that then attempt to
use that FileHandle fail with an error.
We avoid this problem by making sure the 'svn_hash' temp file is created
in the same place the 'svn_delta_...' and 'git_blob_...' temp files are
(and then temp_release'd) so that it can be safely used inside the
close_file function without having its FileHandle end up in an SVN::Pool
that gets cleared.
Additionally the Git.pm cat_blob function creates a bidirectional pipe
FileHandle using the IPC::Open2::open2 function. If that handle is
created too late, it also gets caught up in the SVN::Pool and incorrectly
closed by the SVN::Pool::clear call. But this only seems to happen with
more recent versions of Perl and svn.
To avoid this problem we add an explicit call to _open_cat_blob_if_needed
before the first call to SVN::Pool->new_default to make sure the open2
handle does not end up in the SVN::Pool.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn uses POSIX::strftime('%s', $sec, $min, ...) to make unix epoch time.
But lowercase %s formatting character is a GNU extention. This causes problem
in git svn fetch --localtime on non-glibc systems, such as msys or cygwin.
Using Time::Local::timelocal($sec, $min, ...) fixes it.
Signed-off-by: Ryuichi Kokubo <ryu1kkb@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Notes:
lowercase %s format character in strftime is a GNU extension and not widely supported.
POSIX::strftime affected by underlying crt's strftime because POSIX::strftime just calls crt's one.
Time::Local is good function to replace POSIX::strftime because it's a perl core module function.
Document about Time::Local.
http://perldoc.perl.org/Time/Local.html
These are specifications of strftime.
The GNU C Library Reference Manual.
http://www.gnu.org/software/libc/manual/html_node/Formatting-Calendar-Time.html
perl POSIX module's strftime document. It does not have '%s'.
http://perldoc.perl.org/POSIX.html
strftime document of Microsort Windows C Run-Time library.
https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx
The Open Group's old specification does not have '%s' too.
http://pubs.opengroup.org/onlinepubs/007908799/xsh/strftime.html
On my environment, following problems happened.
- msys : git svn fetch does not progress at all with perl.exe consuming CPU.
- cygwin : git svn fetch progresses but time stamp information is dropped.
Every commits have unix epoch timestamp.
I would like to thank git developer and contibutors.
git helps me so much everyday.
Thank you.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can delay loading some modules until we need them for uncommon
code paths. For example, persistent memoization is not often
needed, so we can avoid loading the modules for it until we
encounter svn::mergeinfo during fetch.
This gives a tiny reduction in syscalls (from 15641 to 15305) when
running "git svn info" and counting via "strace -fc". Further,
more invasive work will be needed to noticeably improve performance.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
ref_id should not match "refs/remotes/".
[ew: dropped initial hunk for GIT_SVN_ID at Ramkumar's request]
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This change allows git-svn to support setting subversion properties.
It is useful for manually setting properties when committing to a
subversion repo that *requires* properties to be set without requiring
moving your changeset to separate subversion checkout in order to
set props.
This change is initially from David Fraser, appearing at:
http://mid.gmane.org/1927112650.1281253084529659.JavaMail.root@klofta.sjsoft.com>
They are now forward-ported to most recent git along with fixes to
deal with files in subdirectories.
Style and functional changes from Eric Wong have been taken
in their entirety from:
http://mid.gmane.org/20141201094911.GA13931@dcvr.yhbt.net
There is a nit to point out: the code does not support
adding props unless there are also content changes to the files as
well. This is demonstrated in the testcase.
[ew - simplify Git.pm usage for check-attr
- improve shell portability for tests
- minor phrasing changes in commit message]
Signed-off-by: David Fraser <davidf@sjsoft.com>
Signed-off-by: Alfred Perlstein <alfred@freebsd.org>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This avoids the following failure with normal "get_dir" on newer
versions of SVN (tested with SVN 1.8.8-1ubuntu3.1):
Incorrect parameters given: Could not convert '%ld' into a number
get_dir2 also has the potential to be more efficient by requesting
less data.
ref: <1414636504.45506.YahooMailBasic@web172304.mail.ir2.yahoo.com>
ref: <1414722617.89476.YahooMailBasic@web172305.mail.ir2.yahoo.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Memoizing these initialization functions saves some memory for
long fetches which require scanning many unwanted revisions
before any wanted revisions happen.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This memoization appears unneeded as the check_cherry_pick2 cache is
in front of it does enough.
With this change applied, importing from local svn+ssh and http copies
of the R repo[1] takes only 2:00 (2 hours) on my system and the git-svn
process never uses more than 60MB RSS on my x86-64 GNU/Linux system[2].
This 60M measurement is only for the git-svn Perl process itself and
does not include memory used by git subprocesses accessing large packs
(subprocess memory usage _is_ measured by my time(1) tool).
Before this change, an import took longer (2:20) on svn+ssh:// but
git-svn used around 240MB during the imports. Worse yet, git-svn
ballooned to over 400M when writing out the cache to the filesystem.
I also tried removing memoization for `has_no_changes', too, but a
local copy of the R repository(*) was not close to finishing within
10 hours on my system.
[1] http://svn.r-project.org/R
[2] file:// repos causes libsvn to use more memory internally
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
There is no reason to keep entries in the %revs hash after we're
done processing a revision, so allow entries become freed as
processing continues.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This override was probably never necessary, but most likely a no-op
as it does not appear to do anything in SVN::Ra itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Despite attempting to use local memory pools everywhere we can,
(including our call to SVN::Ra::do_update and all subsequent reporter
calls), there does not appear to be a way to force the Git::SVN::Fetcher
callbacks to use a pool other than the per-SVN::Ra pool.
Git::SVN::Fetcher ends up using the main RA pool which grows
monotonically in size for the lifetime of the RA object.
Thus the only way to free that memory appears to be to destroy and
recreate the RA connection for at every --log-window-size interval.
This reduces memory usage over the course of fetching 10K revisions
using a test repository created with the script at the end of this
commit message.
As reported by time(1) on my x86-64 system:
before: 54024k
after: 28680k
Unfortunately, there remains some yet-to-be-tracked-down slow memory
growth which would be evident as the `nr' parameter increases in
the repository generation script:
-----------------------------8<------------------------------
set -e
tmp=$(mktemp -d svntestrepo-XXXXXXXX)
svnadmin create "$tmp"
repo=file://"$(cd $tmp && pwd)"
svn co "$repo" "$tmp/wd"
cd "$tmp/wd"
if ! test -f a
then
> a
svn add a
svn commit -m 'A'
fi
nr=10000
while test $nr -gt 0
do
echo $nr > a
svn commit -q -m A
nr=$((nr - 1))
done
echo "repository created in $repo"
-----------------------------8<------------------------------
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should further reduce memory usage from the new mergeinfo
speedups without hurting performance too much, assuming
reasonable latency to the SVN server.
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should reduce excessive memory usage from the new mergeinfo
caches without hurting performance too much, assuming reasonable
latency to the SVN server.
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We do not need to store entire lists of commits, only the
number of incomplete and the first commit for reference.
This reduces the amount of data we need to store in memory
and on disk stores.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Subversion can put mergeinfo on any sub-directory to track cherry-picks.
Since cherry-picks are not represented explicitly in git, git-svn should
just ignore it.
Signed-off-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
