Finally.
The separate-remote layout is so much more organized than
traditional and easier to work with especially when you need to
deal with remote repositories with multiple branches and/or you
need to deal with more than one remote repositories, and using
traditional layout for new repositories simply does not make
much sense.
Internally we still have code for 1:1 mappings to create a bare
clone; that is a good thing and will not go away.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we lost the "first refspec is the one that is merged by default"
rule, there is no reason for clone to list the remote primary branch
in the config file explicitly anymore.
We still need it for the traditional layout for other reasons,
though.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Everybody hated the pull behaviour of merging the first branch
listed on remotes/* file (or remote.*.fetch config) into the
current branch. This finally corrects that UI wart by
forbidding "git pull" without an explicit branch name on the
command line or branch.$current.merge for the current branch.
The matching change to git-clone was made to prepare the default
branch.*.merge entry for the primary branch some time ago.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This stops enumerating the set of branches found on the remote
side when a clone was made in the configuration file. Instead,
a single entry that maps each remote branch to the local
tracking branch for the remote under the same name is created.
Doing it this way not only shortens the configuration file, but
automatically adjusts to a new branch added on the remote side
after the clone is made.
Unfortunately this cannot be done for the traditional layout,
where we always need to special case the 'master' to 'origin'
mapping within the local branch namespace. But that is Ok; it
will be going away before v1.5.0.
We could also lose the "primary branch" mapping at the
beginning, but that has to wait until we implement the "forbid
'git pull' when we do not have branch.$current.merge for the
current branch" policy we earlier discussed. That should also
be in v1.5.0
Signed-off-by: Junio C Hamano <junkio@cox.net>
This hacks the input to fmt-merge-msg to make the message for
merging early part of a branch a little easier to read.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of this is derived from the documentation of RCS merge.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When --use-separate-remote is used on git-clone, the remote
heads are saved under $GIT_DIR/refs/remotes/origin/, not
"$GIT_DIR/remotes/origin/"
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the current branch was "master" then git-status wouldn't say
# On branch XXXX
In its output. This patch makes it so that this message is always
output; regardless of branch name.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that 'git add' is considered a first-class UI for 'update-index'
and that the 'git add' documentation states "Even modified files
must be added to the set of changes about to be committed" we should
make the output of 'git status' align with that documentation and
common usage.
So now we see a status output such as:
# Added but not yet committed:
# (will commit)
#
# new file: x
#
# Changed but not added:
# (use "git add file1 file2" to include for commit)
#
# modified: x
#
# Untracked files:
# (use "git add" on files to include for commit)
#
# y
which just reads better in the context of using 'git add' to
manipulate a commit (and not a checkin, whatever the heck that is).
We also now support 'color.status.added' as an alias for the existing
'color.status.updated', as this alias more closely aligns with the
current output and documentation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a user modifies files and runs 'git commit' (without the very
useful -a option) and they have not yet updated the index they
are probably coming from another SCM-like tool which would perform
the same as 'git commit -a' in this case. Showing the user their
current status and a final line of "nothing to commit" is not very
reassuring, as the user might believe that Git did not recognize
their files were modified.
Instead we can suggest as part of the 'nothing to commit' message
that the user invoke 'git add' to add files to their next commit.
Suggested by Andy Parkins' Git 'niggles' list
(<200612132237.10051.andyparkins@gmail.com>).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Two of the cases has "[--] [<path>...]" and two had "-- [<path>...]".
Not terribly consistent and potentially confusing. Also add "[--]" to
the synopsis so that it's obvious you can use it from the very
beginning.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For multivars, the "git-repo-config name value ^$" is useful but
nonintuitive and troublesome to do repeatedly (since the value is not
at the end of the command line). This commit simply adds an --add
option that adds a new value to a multivar. Particularly useful for
tracking a new branch on a remote:
git-repo-config --add remote.origin.fetch +next:origin/next
Includes documentation and test.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that 'git show' accepts ref:path as an argument to specify a
tree or blob we should use the same completion logic as we support
for cat-file's object identifier.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
New and experienced Git users alike are finding out too late that
they forgot to enable reflogs in the current repository, and cannot
use the information stored within it to recover from an incorrectly
entered command such as `git reset --hard HEAD^^^` when they really
meant HEAD^^ (aka HEAD~2).
So enable reflogs by default in all future versions of Git, unless
the user specifically disables it with:
[core]
logAllRefUpdates = false
in their .git/config or ~/.gitconfig.
We only enable reflogs in repositories that have a working directory
associated with them, as shared/bare repositories do not have
an easy means to prune away old log entries, or may fail logging
entirely if the user's gecos information is not valid during a push.
This heuristic was suggested on the mailing list by Junio.
Documentation was also updated to indicate the new default behavior.
We probably should start to teach usuing the reflog to recover
from mistakes in some of the tutorial material, as new users are
likely to make a few along the way and will feel better knowing
they can recover from them quickly and easily, without fsck-objects'
lost+found features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Back in the old days of Git when people messed around with their
GIT_DIR environment variable more often it was nice to know whether
or not git-init-db created a .git directory or used GIT_DIR.
As most users at that time were rather technical UNIXy folk the
message "defaulting to local storage area" made sense to some and
seemed reasonable.
But it doesn't really convey any meaning to the new Git user,
as they don't know what a 'local storage area is' nor do they
know enough about Git to care. It also really doesn't tell the
experienced Git user a whole lot about the command they just ran,
especially if they might be reinitializing an existing repository
(e.g. to update hooks).
So now we print out what we did ("Initialized empty" or
"Reinitialized existing"), what type of repository ("" or "shared"),
and what location the repository will be in ("$GIT_DIR").
Suggested in part by Andy Parkins in his Git 'niggles' list
(<200612132237.10051.andyparkins@gmail.com>).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Cygwin folks have done a fine job at creating a POSIX layer
on Windows That Just Works(tm). However it comes with a penalty;
accessing files in the working tree by way of stat/open/mmap can
be slower for diffcore than inflating the data from a blob which
is stored in a packfile.
This performance problem is especially an issue in merge-recursive
when dealing with nearly 7000 added files, as we are loading
each file's content from the working directory to perform rename
detection. I have literally seen (and sadly watched) paint dry in
less time than it takes for merge-recursive to finish such a merge.
On the other hand this very same merge runs very fast on Solaris.
If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will
avoid looking at the working directory when the blob in question
is available within a packfile and the caller doesn't need the data
unpacked into a temporary file.
We don't use loose objects as they have the same open/mmap/close
costs as the working directory file access, but have the additional
CPU overhead of needing to inflate the content before use. So it
is still faster to use the working tree file over the loose object.
If the caller needs the file data unpacked into a temporary file
its likely because they are going to call an external diff program,
passing the file as a parameter. In this case reusing the working
tree file will be faster as we don't need to inflate the data and
write it out to a temporary file.
The NO_FAST_WORKING_DIRECTORY feature is enabled by default on
Cygwin, as that is the platform which currently appears to benefit
the most from this option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-show is pure Porcelain, it is the ideal candidate to
pretty print other things than commits, too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is asked on the list how to revert selected path in
the index from a tree, most often HEAD, without affecting the
files in the working tree. A similar operation that also
affects the working tree files has been available in the form of
"git checkout <tree> -- <paths>...".
By definition --soft would never affect either the index nor the
working tree files, and --hard is the way to make the working
tree files as close to pristine, so this new option is available
only for the default --mixed case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you typically sit in, say "src/", it's annoying to have to
change directory to do a reset.
This may need to be reworked when we add "git reset -- paths..."
to encapsulate the "ls-tree $tree | update-index --index-info"
pattern.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since a long time, we have inbuilt diff generation.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When comparing file contents during the second loop through a rename
detection attempt we can skip the expensive byte-by-byte comparsion
if both source and destination files have valid SHA1 values. This
improves performance by avoiding either an expensive open/mmap to
read the working tree copy, or an expensive inflate of a blob object.
Unfortunately we still have to at least initialize the sizes of the
source and destination files even if the SHA1 values don't match.
Failing to initialize the sizes causes a number of test cases to fail
and start reporting different copy/rename behavior than was expected.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Porcelain documentation should talk in terms of end-user workflow, not
in terms of implementation details. Do not suggest update-index, but
git-add instead. Explain differences among 0-, 1- and 2-tree cases
not as differences of number of trees given to the command, but say
why user would want to give these number of trees to the command in
what situation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The list concensus is to group color related configuration under
"color.*" so let's be consistent.
Inspired by Andy Parkins's patch to do the same for diff/log
family. With fixes from Eric Wong.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The low-level parts of the SVN library return NULL/undef for
author-less revisions, whereas "(no author)" is a (svn) client
convention.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/read-tree-ignore:
read-tree: document --exclude-per-directory
Loosen "working file will be lost" check in Porcelain-ish
read-tree: further loosen "working file will be lost" check.
* np/addcommit:
git-commit: allow --only to lose what was staged earlier.
Documentation/git-commit: rewrite to make it more end-user friendly.
make 'git add' a first class user friendly interface to the index
* lh/branch-rename:
git-branch: let caller specify logmsg
rename_ref: use lstat(2) when testing for symlink
git-branch: add options and tests for branch renaming
Conflicts:
builtin-branch.c
Showing local and remote branches in green and red was simply
overkill, as all we wanted was to make it easy to tell them
apart (local ones can be built on top by committing, but the
remote tracking ones can't).
Use plain coloring for local branches and paint remotes in red.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/merge:
merge-recursive: add/add really is modify/modify with an empty base
Get rid of the dependency on RCS' merge program
merge-file: support -p and -q; fix compile warnings
Add builtin merge-file, a minimal replacement for RCS merge
xdl_merge(): fix and simplify conflict handling
xdl_merge(): fix thinko
xdl_merge(): fix an off-by-one bug
merge-recursive: use xdl_merge().
xmerge: make return value from xdl_merge() more usable.
xdiff: add xdl_merge()
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation talked about "git push $URL tag <tag>" as a short-hand
for refs/tags/<tag>:refs/tags/<tag> for a long time but that was never
the case (the short-hand was for "git fetch"). Instead of fixing the
documentation, just add a bit of code to match it since it is easy to do
and would make it more consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just a random hack to work around problems people seem
to be seeing in manpage backend of xmlto (it appears we are
getting ".sp" at the end of line without line break).
Could people test this out?
Signed-off-by: Junio C Hamano <junkio@cox.net>
99.9999% of the time, the command is used with a single
strategy; after a merge failure, saying "No strategy handled the
merge" is technically correct, but there is no point stressing
we tried and failed all the possibilities the user has given.
Just say that it failed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Prior to 65ac6e9c3f we deleted a file
from the working directory during a merge if the file existed before
the merge started but was renamed by the branch being merged in.
This broke in 65ac6e as git-merge-recursive did not actually update
the working directory on an uncontested rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 4c81c213a4.
Although --cached and --index are confusing wording, the use of
word --cached for git-diff is consistent with git-apply. It means
"work with index without looking at the working tree".
We should probably come up with better wording for --cached, if
somebody wants to deprecate it. But making --index and --cached
synonyms for diff while leaving them mean different things for
apply is no good.
