Add tests rebasing a linear branch topology to linear rebase tests
added in 2aad7cace2 ("add simple tests of consistency across rebase
types", 2013-06-06).
These tests are duplicates of two surrounding tests that do the same
with tags pointing to the same objects. Right now there's no change in
behavior being introduced, but as we'll see in a subsequent change
rebase can have different behaviors when working implicitly with
remote tracking branches.
While I'm at it add a --fork-point test, strictly speaking this is
redundant to the existing '' test, as no argument to rebase implies
--fork-point. But now it's easier to grep for tests that explicitly
stress --fork-point.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we rebased with a --fork-point invocation where the
fork-point wasn't empty, we would be setting options.restrict_revision.
The fast-forward logic would automatically declare that the rebase was
not fast-forwardable if it was set. However, this was painting with a
very broad brush.
Refine the logic so that we can fast-forward in the case where the
restricted revision is equal to the merge base, since we stop rebasing
at the merge base anyway.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, can_fast_forward was written with an if-else statement. However,
in the future, we may be adding more termination cases which would lead
to deeply nested if statements.
Refactor to use a goto tower so that future cases can be easily
inserted.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more stress tests for the can_fast_forward() case in
rebase.c. These tests are getting rather verbose, but now we can see
under --ff and --no-ff whether we skip work, or whether we're forced
to run the rebase.
These tests aren't supposed to endorse the status quo, just test for
what we're currently doing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "same head" introduced in the preceding commit to check whether
the rebase.c code lands in the can_fast_forward() case in, and thus
prints out an "is up to date" and aborts early.
In some of these cases we make it past that and to "rewinding head",
then do a rebase, only to find out there's nothing to change so HEAD
stays at the same OID.
These tests presumed these two cases were the same thing. In terms of
where HEAD ends up they are, but we're not only interested in rebase
semantics, but also whether or not we're needlessly doing work when we
could avoid it entirely.
I'm adding "same" and "diff" here because I'll follow-up and add
--no-ff tests, where some of those will be "diff"-erent, so add the
"diff" code already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase is run on a branch that can be fast-forwarded, this should
automatically be done. Create test to ensure this behavior happens.
There are some cases that currently don't pass. The first case is where
a feature and master have diverged, running
"git rebase master... master" causes a full rebase to happen even though
a fast-forward should happen.
The second case is when we are doing "git rebase --fork-point" and a
fork-point commit is found. Once again, a full rebase happens even
though a fast-forward should happen.
Mark these cases as failure so we can fix it later.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test & perf scripts must use unique numeric prefix, but a pair
shared the same number, which is fixed here.
* jk/perf-no-dups:
t/perf: rename duplicate-numbered test script
Compilation fix.
* rs/nedalloc-fixlets:
nedmalloc: avoid compiler warning about unused value
nedmalloc: do assignments only after the declaration section
The first line of verbose output from each test piece now carries
the test name and number to help scanning with eyeballs.
* sg/show-failed-test-names:
tests: show the test name and number at the start of verbose output
t0000-basic: use realistic test script names in the verbose tests
The code to write commit-graph over given commit object names has
been made a bit more robust.
* sg/commit-graph-validate:
commit-graph: error out on invalid commit oids in 'write --stdin-commits'
commit-graph: turn a group of write-related macro flags into an enum
t5318-commit-graph: use 'test_expect_code'
"git checkout" and "git restore" to re-populate the index from a
tree-ish (typically HEAD) did not work correctly for a path that
was removed and then added again with the intent-to-add bit, when
the corresponding working tree file was empty. This has been
corrected.
* vn/restore-empty-ita-corner-case-fix:
restore: add test for deleted ita files
checkout.c: unstage empty deleted ita files
"git pack-refs" can lose refs that are created while running, which
is getting corrected.
* sc/pack-refs-deletion-racefix:
pack-refs: always refresh after taking the lock file
Test fix.
* sg/do-not-skip-non-httpd-tests:
t: warn against adding non-httpd-specific tests after sourcing 'lib-httpd'
t5703: run all non-httpd-specific tests before sourcing 'lib-httpd.sh'
t5510-fetch: run non-httpd-specific test before sourcing 'lib-httpd.sh'
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
"git grep --recurse-submodules" that looks at the working tree
files looked at the contents in the index in submodules, instead of
files in the working tree.
* mt/grep-submodules-working-tree:
grep: fix worktree case in submodules
To avoid data loss, 'git worktree remove' refuses to delete a worktree
if it's dirty or contains untracked files. However, the error message
only mentions that the worktree "is dirty", even if the worktree in
question is in fact clean, but contains untracked files:
$ git worktree add test-worktree
Preparing worktree (new branch 'test-worktree')
HEAD is now at aa53e60 Initial
$ >test-worktree/untracked-file
$ git worktree remove test-worktree/
fatal: 'test-worktree/' is dirty, use --force to delete it
$ git -C test-worktree/ diff
$ git -C test-worktree/ diff --cached
$ # Huh? Where are those dirty files?!
Clarify this error message to say that the worktree "contains modified
or untracked files".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grammar for commits used a '?' rather than a '*' on the `merge`
directive line, despite the fact that the code allows multiple `merge`
directives in order to support n-way merges. In fact, elsewhere in
git-fast-import.txt there is an explicit declaration that "an unlimited
number of `merge` commands per commit are permitted by fast-import".
Fix the grammar to match the intent and implementation.
Reported-by: Joachim Klein <joachim.klein@automata.tools>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two perf scripts numbered p5600, but with otherwise different
names ("clone-reference" versus "partial-clone"). We store timing
results in files named after the whole script, so internally we don't
get confused between the two. But "aggregate.perl" just prints the test
number for each result, giving multiple entries for "5600.3". It also
makes it impossible to skip one test but not the other with
GIT_SKIP_TESTS.
Let's renumber the one that appeared later (by date -- the source of the
problem is that the two were developed on independent branches). For the
non-perf test suite, our test-lint rule would have complained about this
when the two were merged, but t/perf never learned that trick.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-----BEGIN PGP SIGNATURE-----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=hE45
-----END PGP SIGNATURE-----
Merge tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git
Git 2.23-rc2
* tag 'v2.23.0-rc2' of git://git.kernel.org/pub/scm/git/git: (63 commits)
Git 2.23-rc2
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
sha1-file: release strbuf after use
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
commit-graph: release strbufs after use
l10n: reformat some localized strings for v2.23.0
merge-recursive: avoid directory rename detection in recursive case
commit-graph: fix bug around octopus merges
restore: fix typo in docs
doc: typo: s/can not/cannot/ and s/is does/does/
Git 2.23-rc1
log: really flip the --mailmap default
RelNotes/2.23.0: fix a few typos and other minor issues
RelNotes/2.21.1: typofix
log: flip the --mailmap default unconditionally
config: work around bug with includeif:onbranch and early config
A few more last-minute fixes
repack: simplify handling of auto-bitmaps and .keep files
...
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
