Previously, the code would always set up the excludes, and then manually
pick through the pathspec we were given, assuming that non-added but
existing paths were just ignored. This was mostly correct, but would
erroneously mark a totally empty directory as 'ignored'.
Instead, we now use the collect_ignored option of dir_struct, which
unambiguously tells us whether a path was ignored. This simplifies the
code, and means empty directories are now just not mentioned at all.
Furthermore, we now conditionally ask dir_struct to respect excludes,
depending on whether the '-f' flag has been set. This means we don't have
to pick through the result, checking for an 'ignored' flag; ignored entries
were either added or not in the first place.
We can safely get rid of the special 'ignored' flags to dir_entry, which
were not used anywhere else.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When set, this option will cause read_directory to keep
track of which entries were ignored. While this shouldn't
effect functionality in most cases, it can make warning
messages to the user much more useful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
so that an ugly commit message like this can be
handled sanely.
Currently, --pretty=oneline and --pretty=email (hence
format-patch) take and use only the first line of the commit log
message. This changes them to:
- Take the first paragraph, where the definition of the first
paragraph is "skip all blank lines from the beginning, and
then grab everything up to the next empty line".
- Replace all line breaks with a whitespace.
This change would not affect a well-behaved commit message that
adheres to the convention of "single line summary, a blank line,
and then body of message", as its first paragraph always
consists of a single line. Commit messages from different
culture, such as the ones imported from CVS/SVN, can however get
chomped with the existing behaviour at the first linebreak in
the middle of sentence right now, which would become much easier
to see with this change.
The Subject: and --pretty=oneline output would become very long
and unsightly for non-conforming commits, but their messages are
already ugly anyway, and thischange at least avoids the loss of
information.
The Subject: line from a multi-line paragraph is folded using
RFC2822 line folding rules at the places where line breaks were
in the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we had 16kB limit when formatting log messages for
output, because it was easier to arrange for the caller to have
a reasonably big buffer and pass it down without ever worrying
about reallocating.
This changes the calling convention of pretty_print_commit() to
lift this limit. Instead of the buffer and remaining length, it
now takes a pointer to the pointer that points at the allocated
buffer, and another pointer to the location that stores the
allocated length, and reallocates the buffer as necessary.
To support the user format, the error return of interpolate()
needed to be changed. It used to return a bool telling "Ok the
result fits", or "Sorry, I had to truncate it". Now it returns
0 on success, and returns the size of the buffer it wants in
order to fit the whole result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases changing environment variables (GIT_DIR or
GIT_WORK_TREE) can cause problems:
git has to use GIT_DIR to read the aliases from the config.
After running handle_options for the alias the options of the
alias may have changed environment variables. Depending on
the implementation of setenv the memory location obtained
through getenv earlier may contain the old value or the new
value (or even be used for something else?). To avoid these
problems git errors out if an alias uses any option which
changes environment variables.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for keeping two entry lists in the
dir object.
This patch adds and uses the ALLOC_GROW() macro, which
implements the commonly used idiom of growing a dynamic
array using the alloc_nr function (not just in dir.c, but
everywhere).
We also move creation of a dir_entry to dir_entry_new.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-remote show remote-name' lists the refs that are pushed to the remote
by showing the 'Push' line from the config file. But before showing it,
it shortened 'refs/heads/here:refs/heads/there' to 'here:there'. However,
if the Push line is prefixed with a plus, the ref was not shortened.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
/.git or .git is removed from the project name and the
basename of the remaining path is used as the beginning of
the filename and as the directory in the archive.
The regexp will actually not strip off /.git or .git if there
wouldn't be anything left after removing it.
Currently the full project name is used as directory in the
archive and the basename is used as filename. For example a
repository named foo/bar/.git will have a archive named
.git-<version>.* and extract to foo/bar/.git. With this patch
the file is named bar-<version>.* and extracts to bar.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only a dozen or so uses of strdup in all of git.
Of those, most seem ok, but this one isn't:
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* aw/cvs:
cvsimport: add <remote>/HEAD reference in separate remotes more
cvsimport: update documentation to include separate remotes option
cvsimport: add support for new style remote layout
This changes the way git-submodule uses .gitmodules: Subsections no longer
specify the submodule path, they now specify the submodule name. The
submodule path is found under the new key "submodule.<name>.path", which is
a required key.
With this change a submodule can be moved between different 'checkout paths'
without upsetting git-submodule.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename [module] to [submodule], so that it would be more
forward compatible with the proposed extension by harmonizing
the section names used in .gitmodules and .git/config.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the initial clone of a submodule, no files would be checked out in
the submodule directory if the submodule HEAD was equal to the SHA-1
specified in the index of the containing repository. This fixes the problem
by simply ignoring submodule HEAD for a fresh clone.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for an unmolested file wouldn't fail properly if the file had been
removed or replaced by something other than a regular file. This fixes it.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, a second "-C" on the command line had no effect.
But "--find-copies-harder" is so long to type, let's make doubled -C
enable that option. It is in line with how "git blame" handles such
doubled options to mean "work harder".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other directory location variables do not have the trailing
slash.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent git-gui has the ability to determine the location of its library
files relative to the --exec-dir. Its Makefile enables this capability
depending on the install paths that are specified. However, without this
fix there is an extra slash in a path specification, so that the Makefile
does not recognize the equivalence of two paths that it compares.
A side-effect is that all "standard" builds (which do not set $(sharedir)
explicitly) now exploit above mentioned gut-gui feature.
Another side-effect is that an ugly compiled-in double-slash in
$(template_dir) is avoided.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Save geometry before the window layout is damaged
git-gui: Give amend precedence to HEAD over MERGE_MSG
git-gui: Include 'war on whitespace' fixes from git.git
This makes --suppress-from actually work when you're unfortunate enough
to have non-ASCII in your name. Also, if there's a match use the optionally
RFC2047 quoted version from the email.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Save geometry before the window layout is damaged
git-gui: Give amend precedence to HEAD over MERGE_MSG
git-gui: Include 'war on whitespace' fixes from git.git
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit
b6047c5a81.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently git-commit.sh (the command line commit user interface in
core Git) always gives precedence to the prior commit's message if
`commit --amend` is used and a $GIT_DIR/MERGE_MSG file also exists.
We actually were doing the same here in git-gui, but the amended
message got lost if $GIT_DIR/MERGE_MSG already existed because
we started a rescan immediately after loading the prior commit's
body into the edit buffer. When that happened the rescan found
MERGE_MSG existed and replaced the commit message buffer with the
contents of that file. This meant the user never saw us pick up
the commit message of the prior commit we are about to replace.
Johannes Sixt <J.Sixt@eudaptics.com> found this bug in git-gui by
running `git cherry-pick -n $someid` and then trying to amend the
prior commit in git-gui, thus combining the contents of $someid
with the contents of HEAD, and reusing the commit message of HEAD,
not $someid. With the recent changes to make cherry-pick use the
$GIT_DIR/MERGE_MSG file Johannes saw git-gui pick up the message
of $someid, not HEAD. Now we always use HEAD if we are amending.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier git.git applied a large "war on whitespace" patch that was
created using 'apply --whitespace=strip'. Unfortunately a few of
git-gui's own files got caught in the mix and were also cleaned up.
That was a6080a0a44.
This patch is needed in git-gui.git to reapply those exact same
changes here, otherwise our version generator script is unable to
obtain our version number from git-describe when we are hosted in
the git.git repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When using git-p4 in this manner:
git-p4 clone //depot/path/project myproject
If "myproject" already exists as a dir, but not a valid git repo, it fails
to create the directory.
Signed-off-by: Kevin Green <Kevin.Green@morganstanley.com>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Internalize symbolic-ref HEAD reading logic
git-gui: Expose the merge.diffstat configuration option
git-gui: Allow users to delete remote branches
git-gui: Allow users to rename branches through 'branch -m'
git-gui: Disable tearoff menus on Windows, Mac OS X
git-gui: Provide fatal error if library is unavailable
git-gui: Enable verbose Tcl loading earlier
git-gui: Show the git-gui library path in 'About git-gui'
git-gui: GUI support for running 'git remote prune <name>'
git gui 0.8.0
* maint: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
* 'maint' of git://repo.or.cz/git-gui: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
* maint: (38 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
Allow choosing between '-c' (combined diff) and '--cc' (compact
combined) diff format in 'commitdiff' view for merge (multiparent)
commits. Default is now '--cc'.
In the bottom part of navigation bar there is link allowing to change
diff format: "combined" for '-c' (when using '--cc') and "compact" for
'--cc' (when using '-c'), just on the right of "raw" link to
'commitdiff_plain" view.
About patchset part of diff --cc output: the difftree (whatchanged
table) has "patch" links to anchors to individual patches (on the same
page). The --cc option further compresses the patch output by
omitting some hunks; when this optimization makes all hunks disappear,
the patch is not shown (like in any other "empty diff" case). But the
fact that patch has been simplified out is not reflected in the raw
(difftree) part of diff output; the raw part is the same for '-c' and
'--cc' options. As correcting difftree is rather out of the question,
as it would require scanning patchset part before writing out
difftree, we add "Simple merge" empty diffs as a place to have anchor
to in place of those simplified out and removed patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
