* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
When using multi-pass authentication methods, the curl library may
need to rewind the read buffers (depending on how much already has
been fed to the server) used for providing data to HTTP PUT, POST or
PROPFIND, and in order to allow the library to do so, we need to tell
it how by providing either an ioctl callback or a seek callback.
This patch adds an ioctl callback, which should be usable on older
curl versions (since 7.12.3) than the seek callback (introduced in
curl 7.18.0).
Some HTTP servers (such as Apache) give an 401 error reply immediately
after receiving the headers (so no data has been read from the read
buffers, and thus no rewinding is needed), but other servers (such
as Lighttpd) only replies after the whole request has been sent and
all data has been read from the read buffers, making rewinding necessary.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/http-auth:
http-push.c: use a faux remote to pass to http_init
Do not name "repo" struct "remote" in push_http.c
http.c: CURLOPT_NETRC_OPTIONAL is not available in ancient versions of cURL
http authentication via prompts
http_init(): Fix config file parsing
http.c: style cleanups
Conflicts:
http-push.c
Change three occurences of using inconsistent error/warning reporting by
using the relevant error() / warning() calls to be consitent with the
rest of the code.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows http_push to use http authentication via prompts.
You may notice that there is a remote struct that only contains the
url from the repo struct. This struct is a temporary fix for a larger
issue, but gets http authentication via prompts out the door, and
keeps users from having to store passwords in plain text files.
Signed-off-by: Amos King <amos.l.king@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is a first step in getting http-push to use http authentication
via prompts. The patch renames remote to repo so that it doesn't get
confusing with the same remote that is passed around when using http.
Signed-off-by: Amos King <amos.l.king@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
http-push.c::finish_request():
request is initialized by the for loop
index-pack.c::free_base_data():
b is initialized by the for loop
merge-recursive.c::process_renames():
move compare to narrower scope, and remove unused assignments to it
remove unused variable renames2
xdiff/xdiffi.c::xdl_recs_cmp():
remove unused variable ec
xdiff/xemit.c::xdl_emit_diff():
xche is always overwritten
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref_newer() appears to have been copied from builtin-send-pack.c to
http-push.c via cut and paste. This patch moves the function and its
helper unmark_and_free() to remote.c. There was a slight difference
between the two implementations, one used TMP_MARK for the mark, the
other used 1. Per Jeff King, I went with TMP_MARK as more correct.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_local_heads() appears to have been copied from builtin-send-pack.c
to http-push.c via cut and paste. This patch moves the function and its
helper one_local_ref() to remote.c.
The two copies of one_local_ref() were not identical. I used the more
recent version from builtin-send-pack.c after confirming with Jeff King
that it was an oversight that commit 30affa1e did not update both
copies.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/http-push:
http-push: wrap signature of get_remote_object_url
http-push: add back underscore separator before lock token
http-push.c: get_remote_object_url() is only used under USE_CURL_MULTI
http-push: refactor request url creation
The signature of get_remote_object_url stands at 96 characters (as
pointed out by Dscho); this patch wraps it so that it conforms to the
80 characters guideline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
817d14a (http-push: refactor request url creation, 2009-01-31) removed the
underscore separator between the object path and the appended lock token.
This patch adds it back.
This would be keeping in line with the aforementioned patch's objective
of refactoring, without changing the behaviour and effect, of the code.
This would also be useful for testing if the lock token has been
indeed appended to the object url.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/runtime-prefix:
Windows: Revert to default paths and convert them by RUNTIME_PREFIX
Compute prefix at runtime if RUNTIME_PREFIX is set
Modify setup_path() to only add git_exec_path() to PATH
Add calls to git_extract_argv0_path() in programs that call git_config_*
git_extract_argv0_path(): Move check for valid argv0 from caller to callee
Refactor git_set_argv0_path() to git_extract_argv0_path()
Move computation of absolute paths from Makefile to runtime (in preparation for RUNTIME_PREFIX)
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
Introduce two helper functions append_remote_object_url() and
get_remote_object_url() and use them to remove various places
that allocate and format the URL by hand. These functions generate
a URL that point at the fan-out directory inside the remote object
store (e.g. http://host/path/to/repo/objects/a1/) or at an individual
loose object file.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs that use git_config need to find the global configuration.
When runtime prefix computation is enabled, this requires that
git_extract_argv0_path() is called early in the program's main().
This commit adds the necessary calls.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b1c7d4a (http-push: refactor lock-related headers creation for curl
requests, 2009-01-24) had many style violations that slipped through.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
DAV-related headers (more specifically, headers related to the lock token,
namely, If, Lock-Token, and Timeout) for curl requests are created and
allocated individually, eg a "if_header" variable for the "If: " header, a
"timeout_header" variable for the "Timeout: " header.
This patch provides a new function ("get_dav_token_headers") that creates
these header, saving methods from allocating memory, and from issuing a
"curl_slist_append()" call. The temporary string storage given to
curl_slist_append() is freed much earlier than the previous code with this
patch, but this change is safe, because curl_slist_append() keeps a copy
of the given string.
In part, this patch also addresses the fact that commit 753bc91 (Remove
the requirement opaquelocktoken uri scheme) did not update memory
allocations for DAV-related headers.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code is very inconsistent about which signals
are caught for doing cleanup of temporary files and lock
files. Some callsites checked only SIGINT, while others
checked a variety of death-dealing signals.
This patch factors out those signals to a single function,
and then calls it everywhere. For some sites, that means
this is a simple clean up. For others, it is an improvement
in that they will now properly clean themselves up after a
larger variety of signals.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getting the result of remote_ls(), we were advancing the variable
"path" to the relative path inside the repository.
However, then we went on to malloc a bogus amount of memory: we were
subtracting the prefix length _again_, quite possibly getting something
negative, which xmalloc() interprets as really, really much.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program calls remote_ls() to get list of files from the server over
HTTP; handle_remote_ls_ctx() is used to parse its response to populate
"struct remote_ls_ctx" that is returned from remote_ls().
The handle_remote_ls_ctx() function assumed that the server returns a
local path in href field, but RFC 4918 (14.7) demand of support full URI
(e.g. "http://localhost:8080/repo.git").
This resulted in push failure (e.g. git-http-push issues a PROPFIND
request to "/repo.git/alhost:8080/repo.git/refs/" to the server).
Signed-off-by: Kirill A. Korinskiy <catap@catap.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program flow of pushing over http is:
- call lock_remote() to issue a DAV_LOCK request to the server to lock
info/refs and branch refs being pushed into; handle_new_lock_ctx() is
used to parse its response to populate "struct remote_lock" that is
returned from lock_remote();
- send objects;
- call unlock_remote() to drop the lock.
The handle_new_lock_ctx() function assumed that the server will use a
lock token in opaquelocktoken URI scheme, which may have been an Ok
assumption under RFC 2518, but under RFC 4918 which obsoletes the older
standard it is not necessarily true.
This resulted in push failure (often resulted in "cannot lock existing
info/refs" error message) when talking to a server that does not use
opaquelocktoken URI scheme.
Signed-off-by: Kirill A. Korinskiy <catap@catap.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On ARM I have the following compilation errors:
CC fast-import.o
In file included from cache.h:8,
from builtin.h:6,
from fast-import.c:142:
arm/sha1.h:14: error: conflicting types for 'SHA_CTX'
/usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here
arm/sha1.h:16: error: conflicting types for 'SHA1_Init'
/usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here
arm/sha1.h:17: error: conflicting types for 'SHA1_Update'
/usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here
arm/sha1.h:18: error: conflicting types for 'SHA1_Final'
/usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here
make: *** [fast-import.o] Error 1
This is because openssl header files are always included in
git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not
set, which somehow brings in <openssl/sha1.h> clashing with the custom
ARM version. Compilation of git is probably broken on PPC too for the
same reason.
Turns out that the only file requiring openssl/ssl.h and openssl/err.h
is imap-send.c. But only moving those problematic includes there
doesn't solve the issue as it also includes cache.h which brings in the
conflicting local SHA1 header file.
As suggested by Jeff King, the best solution is to rename our references
to SHA1 functions and structure to something git specific, and define those
according to the implementation used.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is called when verify_pack() has its verbose argument set, and
verbose in this context makes sense only for the actual 'git verify-pack'
command. Therefore let's move show_pack_info() to builtin-verify-pack.c
instead and remove useless verbose argument from verify_pack().
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit aa1dbc9 (Update http-push functionality, 2006-03-07)
borrowed some code from rev-list.c.
This copy and paste made sense back then, because mark_edges_uninteresting(),
and its helper mark_edge_parents_uninteresting(), accessed a file scope
static variable "revs" in rev-list.c, and http-push.c did not have nor care
about such a variable.
But these days they are already properly libified and live in list-objects.c
and they take "revs" as as an argument. Make use of them and lose 20 or
so lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other signals are also common, for example SIGTERM and SIGHUP.
This patch modifies the lock file mechanism to catch more signals.
It also modifies http-push.c which was missing SIGTERM.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If locks are not cleaned up the repository is inaccessible for 10 minutes.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies a few things, makes a few things slightly more
complicated, but, more importantly, allows that, when struct ref can
represent a symref, http_fetch_ref() can return one.
Incidentally makes the string that http_fetch_ref() gets include "refs/"
(if appropriate), because that's how the name field of struct ref works.
As far as I can tell, the usage in walker:interpret_target() wouldn't have
worked previously, if it ever would have been used, which it wouldn't
(since the fetch process uses the hash instead of the name of the ref
there).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In transport.c, proxy setting (the one from the remote conf) was set through
curl_easy_setopt() call, while http.c already does the same with the
http.proxy setting. We now just use this infrastructure instead, and make
http_init() now take the struct remote as argument so that it can take the
http_proxy setting from there, and any other property that would be added
later.
At the same time, we make get_http_walker() take a struct remote argument
too, and pass it to http_init(), which makes remote defined proxy be used
for more than get_refs_via_curl().
We leave out http-fetch and http-push, which don't use remotes for the
moment, purposefully.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A failure in prepare_revision_walk can be caused by
a not parseable object.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a goto, and while it is not half as harmful as some people
believe, it was unnecessary here. So remove it for readability.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering submodules in a tree, http-push should not try sending
the respective object. Instead, it should ignore it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before objects are sent, the respective ref is locked. However,
without this patch, the lock is lifted before the last object for
that ref was sent. As a consequence, the lock data was accessed
after the lock structure was free()d.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL to a repository http-push and http-fetch takes should
have a trailing slash. Instead of failing the request, add it
ourselves before attempting such a request.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing http-push does is a PROPFIND to see if the other
end supports locking. The failure message we give is always
reported as "no DAV locking support at the remote repository",
regardless of the reason why we ended up not finding the locking
support on the other end.
This moves the code to report "no DAV locking support" down the
codepath so that the message is issued only when we successfully
get a response to PROPFIND and the other end say it does not
support locking. Other failures, such as connectivity glitches
and credential mismatches, have their own error message issued
and we will not issue "no DAV locking" error (we do not even
know if the remote end supports it).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failing instead of silently not updating remote refs makes the things
clearer for the user when trying to push on a repository while another
person do (or while a dandling locks are waiting for a 10 minutes
timeout).
When silently not updating remote refs, the user does not even know
that git has pushed the objects but leaved the refs as they were
before (e.g. a new bunch of commits on branch "master" is uploaded,
however the branch by itsel still points on the previous head commit).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Releasing webdav lock even if push fails because of bad (or no)
reference on command line.
To reproduce the issue that this patch fixes, prepare a test repository
availlable over http+webdav, say at http://myhost/myrepo.git/
Then:
$ git clone http://myhost/myrepo.git/
$ cd myrepo
$ git push http
Fetching remote heads...
refs/
refs/heads/
refs/tags/
No refs in common and none specified; doing nothing.
$ git push http
Fetching remote heads...
refs/
refs/heads/
refs/tags/
No refs in common and none specified; doing nothing.
$
Finally, you look at the web server logs, and will find one LOCK query
and no UNLOCK query, of course the second one will be in 423 return
code instead of 200:
1.2.3.4 - gb [19/Jan/2008:14:24:56 +0100] "LOCK /myrepo.git/info/refs HTTP/1.1" 200 465
(...)
1.2.3.4 - gb [19/Jan/2008:14:25:10 +0100] "LOCK /myrepo.git/info/refs HTTP/1.1" 423 363
With this patch, there would have be two UNLOCKs in addition of the LOCKs
From the user's point of view:
- If you realize that you should have typed e.g. "git push http
master" instead of "git push http", you will have to wait for 10
minutes for the lock to expire by its own.
- Furthermore, if somebody else is dumb enough to type "git push http"
while you need to push "master" branch, then you'll need too to wait
for 10 minutes too.
Signed-off-by: Gr.ANigoire Barbier <gb@gbarbier.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make http-push always fail when not compiled with USE_CURL_MULTI, since
otherwise it corrupts the remote repository (and then fails anyway).
Signed-off-by: Grégoire Barbier <gb@gbarbier.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the necessary changes to be ok with their difference, and rename the
function http_fetch_ref.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears that despite being initialized, it was never used.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a downloaded ref doesn't contain a sha1, the error message displays
a random sha1 because of uninitialized memory. This happens when cloning
a repository that is already a clone of another one, in which case
refs/remotes/origin/HEAD is a symref.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
XML_Parser were never freed. While at it, move the parser initialization to
right before it is needed.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to open a temporary file to be renamed to something else,
we reported the final filename, not the temporary file we failed to
open.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing "git push --all" is almost perfect for backing up to
another repository, except that "--all" only means "all
branches" in modern git, and it does not delete old branches and
tags that exist at the back-up repository that you have removed
from your local repository.
This teaches "git-send-pack" a new "--mirror" option. The
difference from the "--all" option are that (1) it sends all
refs, not just branches, and (2) it deletes old refs you no
longer have on the local side from the remote side.
Original patch by Junio C Hamano.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "ancestor" is a bit more intuitive (and more consistent with
the documentation) than the term "strict subset".
Also, remove superfluous "ref", capitalize, and add some carriage
returns, changing:
error: remote 'refs/heads/master' is not a strict subset of local ref 'refs/heads/master'. maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
to:
error: remote 'refs/heads/master' is not an ancestor of
local 'refs/heads/master'.
Maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the end-user requested a dry-run push we need to pass that flag
over to http-push and additionally make sure it does not actually
upload any changes to the remote server.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This eliminates the last function provided by the code using http.h as
a global symbol, so it should be possible to have multiple programs
using http.h in the same executable, and it also adds an argument to
that callback, so that info can be passed into the callback without
being global.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes all of the boilerplate and http-internal stuff from
fill_active_slots() and makes it easy to turn into a callback.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes slightly more lines than it adds, but the real reason for
doing this is that future optimizations will require more setup of the
tree descriptor, and so we want to do it in one place.
Also renamed the "desc.buf" field to "desc.buffer" just to trigger
compiler errors for old-style manual initializations, making sure I
didn't miss anything.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Another memory overrun in http-push.c
fetch.o depends on the headers, too.
Documentation: Correct minor typo in git-add documentation.
Documentation/git-send-email.txt: Fix labeled list formatting
Documentation/git-quiltimport.txt: Fix labeled list formatting
Documentation/build-docdep.perl: Fix dependencies for included asciidoc files
* maint:
Start preparing Release Notes for 1.5.0.3
Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name url
Include config.mak in doc/Makefile
git.el: Set the default commit coding system from the repository config.
git-archimport: support empty summaries, put summary on a single line.
http-push.c::lock_remote(): validate all remote refs.
git-cvsexportcommit: don't cleanup .msg if not yet committed to cvs.
Starting from offset 11 might have been good back when it was
only used for updating "refs/heads/*", but it is used to update
"info/refs" and "refs/tags/*" as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Back when only handful commands that created commit and tag were
the only users of committer identity information, it made sense
to explicitly call setup_ident() to pre-fill the default value
from the gecos information. But it is much simpler for programs
to make the call automatic when get_ident() is called these days,
since many more programs want to use the information when updating
the reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
My sp/mmap changes to pack-check.c modified the function such that
it expects packed_git.pack_size to be populated with the total
bytecount of the packfile by the caller.
But that isn't the case for packs obtained by git-http-fetch as
pack_size was not initialized before being accessed. This caused
verify_pack to think it had 2^32-21 bytes available when the
downloaded pack perhaps was only 305 bytes in length. The use_pack
function then later dies with "offset beyond end of packfile"
when computing the overall file checksum.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-tar-tree.c::git_tar_config() and http-push.c::add_one_object()
are not used outside their own files.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
WebDAV on Debian unstable cannot handle renames on WebDAV from
file.ext to newfile (without ext) when newfile* already
exists. Normally, git creates a file like 'objects/xx/sha1.token',
which is renamed to 'objects/xx/sha1' when transferred completely.
Just use '_' instead of '.' so WebDAV doesn't see it as an extension
change.
Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no)
Acked-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Though very nice and readable, the "case 'a'...'z':" construct is not ANSI C99
compliant. This patch unfolds the range in `quote.c' and substitutes the
switch-statement with an if-statement in `http-fetch.c' and `http-push.c'.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ifdef's out more functions that are not used while !USE_MULTI
in http code. Also the dependency of http related objects on http.h
header file was missing in the Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix broken build when USE_CURL_MULTI is not defined, as noted by Becky Bruce.
During cleanup, free header slist that was created during init, as noted
by Junio.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes things that include revision.h build again.
Blame is also built, but I am not sure how well it works (or how
well it worked to begin with) -- it was relying on tree-diff to
be using whatever pathspec was used the last time, which smells
a bit suspicious.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The parent rewriting feature caused us to create the whole history in one
go, and then simplify it later, because of how rewrite_parents() had been
written. However, with a little tweaking, it's perfectly possible to do
even that one incrementally.
Right now, this doesn't really much matter, because every user of
"--parents" will probably generally _also_ use "--topo-order", which will
cause the old non-incremental behaviour anyway. However, I'm hopeful that
we could make even the topological sort incremental, or at least
_partially_ so (for example, make it incremental up to the first merge).
In the meantime, this at least moves things in the right direction, and
removes a strange special case.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you write code after declarations in a block, gcc scolds you
with "warning: ISO C90 forbids mixed declarations and code".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Declare remote_dir_exists[] as signed char to be sure that values of -1
are valid.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Processes new command-line arguments -d and -D to remove a remote branch
if the following conditions are met:
- one branch name is present on the command line
- the specified branch name matches exactly one remote branch name
- the remote HEAD is a symref
- the specified branch is not the remote HEAD
- the remote HEAD resolves to an object that exists locally (-d only)
- the specified branch resolves to an object that exists locally (-d only)
- the specified branch is an ancestor of the remote HEAD (-d only)
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
More consistent usage string, condense push output, remove extra slashes
in URLs, fix unused variables, include HTTP method name in failure
messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If info/refs exists on the remote, get a lock on info/refs, make sure that
there is a local copy of the object referenced in each remote ref (in case
someone else added a tag we don't have locally), do all the refspec updates,
and generate and send an updated info/refs file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace single-use functions with one that can get a list of remote
collections and pass file/directory information to user-defined functions
for processing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Incorporate into http-push a fix related to accessing slot results after
the slot was reused, and fix a case in run_active_slot where a
finished slot wasn't detected if the slot was reused.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The revision walk was not including tags because setup_revisions zeroes out
the revs flags. Pass --objects so it picks up all the necessary bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This brings http-push functionality more in line with the ssh/git version,
by borrowing bits from send-pack and rev-list to process refspecs and
revision history in more standard ways. Also, the status of remote objects
is determined using PROPFIND requests for the object directory rather than
HEAD requests for each object - while it may be less efficient for small
numbers of objects, this approach is able to get the status of all remote
loose objects in a maximum of 256 requests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The malloc patch from Jan Andres fixed the problem that was causing a
segfault when freeing the lock token, and Johannes Schindelin found
and fixed a problem when no URL is specified on the command line.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are whole-tree operations and there is not much point
making them operable from within a subdirectory, but it is easy
to do so, and using setup_git_directory() upfront helps git://
proxy specification picked up from the correct place.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The decision about whether to build http-push or not belongs in the
Makefile. This follows Junio's suggestion to determine whether curl
is new enough to support http-push.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Improved XML parsing - replace specialized doc parser callbacks with generic
functions that track the parser context and use document-specific callbacks
to process that data.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move shared HTTP request functionality out of http-fetch and http-push,
and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with
one fwrite_buffer function that does dynamic buffering. Use slot
callbacks to process responses to fetch object transfer requests and
push transfer requests, and put all of http-push into an #ifdef check
for curl multi support.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make a bunch of needlessly global functions static, and replace two
K&R-style declarations.
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes three things:
- older libexpat does not know about enum XML_Status
- as in my patch for http-fetch, do not rely on a curl result in
free()d data
- calloc the new_lock structure
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remember object directories known to exist in the remote repo and don't
bother trying to create them.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not search the current directory when including expat.h, since it
is not supplied by git.
Signed-off-by: Paul Collins <paul@briny.ondioline.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Improve lock handling: parse the server response for the timeout, owner,
and lock token
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support remote references with slashes in their names
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Verify that remote packs exist before using the pack index, add requests to
the beginning of the queue to locate pending requests faster.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for pushing to a remote repository using HTTP/DAV
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
