directory_exists_in_index() takes pathname and its length, but its
helper function directory_exists_in_index_icase() reads one byte
beyond the end of the pathname and expects there to be a '/'.
This needs to be fixed, as that one-byte-beyond-the-end location may
not even be readable, possibly by not registering directories to
name hashes with trailing slashes. In the meantime, update the new
caller added recently to treat_one_path() to make sure that the path
buffer it gives the function is one byte longer than the path it is
asking the function about by appending a slash to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Old Bash (3.0) which is distributed with RHEL 4.X and other ancient
platforms that are still in wide use, does not understand the
array+=() notation. Let's use an explicit assignment to the new array
element which works everywhere, like:
array[${#array[@]}+1]=''
The right-hand side '' is not strictly necessary, but in this case
I think it is more clear.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "merge.log" config is set, "rebase --preserve-merges" will add
the log lines to the message of the rebased merge commit. A rebase
should not modify a commit message automatically.
Teach "git-rebase" to ignore that configuration by passing
"--no-log" to the git-merge call.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a8786
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git fails due to a segmentation fault if a submodule path is empty.
Here is an example .gitmodules that will cause a segmentation fault:
[submodule "foo-module"]
path
url = http://host/repo.git
$ git status
Segmentation fault (core dumped)
This is because the parsing of "submodule.*.path" is not prepared to
see a value-less "true" and assumes that the value is always
non-NULL (parsing of "ignore" has the same problem).
Fix it by checking the NULL-ness of value and complain with
config_error_nonbool().
Signed-off-by: Jharrod LaFon <jlafon@eyesopen.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newlines in the path to a git repository were not an issue for the
git-specific bash prompt before commit efaa0c1532 (bash prompt:
combine 'git rev-parse' executions in the main code path, 2013-06-17),
because the path returned by 'git rev-parse --git-dir' was directly
stored in a variable, and this variable was later always accessed
inside double quotes.
Newlines are not an issue after commit efaa0c1532 either, but it's
more subtle. Since efaa0c1532 we use the following single 'git
rev-parse' execution to query various info about the repository:
git rev-parse --git-dir --is-inside-git-dir \
--is-bare-repository --is-inside-work-tree
The results to these queries are separated by a newline character in
the output, e.g.:
/home/szeder/src/git/.git
false
false
true
A newline in the path to the git repository could potentially break
the parsing of these results and ultimately the bash prompt, unless
the parsing is done right. Commit efaa0c1532 got it right, as I
consciously started parsing 'git rev-parse's output from the end,
where each record is a single line containing either 'true' or 'false'
or, after e3e0b9378b (bash prompt: combine 'git rev-parse' for
detached head, 2013-06-24), the abbreviated commit object name, and
all what remains at the beginning is the path to the git repository,
no matter how many lines it is.
This subtlety really warrants its own test, especially since I didn't
explain it in the log message or in an in-code comment back then, so
add a test to excercise the prompt with newline characters in the path
to the repository. Guard this test with the FUNNYNAMES prerequisite,
because not all filesystems support newlines in filenames. Note that
'git rev-parse --git-dir' prints '.git' or '.' when at the top of the
worktree or the repository, respectively, and only prints the full
path to the repository when in a subdirectory, hence the need for
changing into a subdir in the test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier draft of the previous step used cache_name_exists() to
check the directory we were looking at, which missed the second case
described in its log message. Demonstrate why it is not sufficient.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit cdfd94837b, as it
does not just apply to "@" (and forms with modifiers like @{u}
applied to it), but also affects e.g. "refs/heads/@/foo", which it
shouldn't.
The basic idea of giving a short-hand might be good, and the topic
can be retried later, but let's revert to avoid affecting existing
use cases for now for the upcoming release.
This reverts commit a73653130e, as it
has been reported that "ls-files --killed" is too time-consuming in
a deep directory with too many untracked crufts (e.g. $HOME/.git
tracking only a few files).
We'd need to revisit it later but "ls-files --killed" needs to be
optimized before it happens.
- From the beginning of push.c in 755225d, 2006-04-29, "thin" option
was enabled by default but could be turned off with --no-thin.
- Then Shawn changed the default to 0 in favor of saving server
resources in a4503a1, 2007-09-09. --no-thin worked great.
- One day later, in 9b28851 Daniel extracted some code from push.c to
create transport.c. He (probably accidentally) flipped the default
value from 0 to 1 in transport_get().
From then on --no-thin is effectively no-op because git-push still
expects the default value to be false and only calls
transport_set_option() when "thin" variable in push.c is true (which
is unnecessary). Correct the code to respect --no-thin by calling
transport_set_option() in both cases.
receive-pack learns about --reject-thin-pack-for-testing option,
which only is for testing purposes, hence no document update.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the tests, p4d is started without using "internationalized
mode". Make sure this environment variable is unset, otherwise
a mis-matched user setting would break the tests. The error
message would be "Unicode clients require a unicode enabled server."
[pw: use unset, add commit text]
Signed-off-by: Kazuki Saitoh <ksaitoh560@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t/t7407-submodule-foreach.sh there is a typo in one of the
path names given for a test step. The correct path is
nested1/nested2/.git, but nested1/nested1/nested2/.git is
given instead. The typo is hidden because this line also
accidentally omits the && chain operator. The omitted chain
also means the return values of all the previous commands in
this test are also being ignored.
Fix the path and add the chain operator so the entire test
sequence can be properly validated.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an attempt to reproduce a problem reported for a third-party
custom "connect" remote helper. The conjecture is that sometimes
"git fetch" wants to make two connections (one for the primary
transfer with 'follow-tags' option set, and then after noticing that
some tags are not packed because the primary transfer did not have
to send any commit that is pointed by them, another to explicitly
ask for the missing tags), and their "connect" helper is not called
in the second request, breaking the "fetch" as a whole.
Unfortunately this test script does not trigger the alleged failure
and happily passes when talking to upload-pack from git-core (see
patch 5/5 for details).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of 'echo' (e.g. dash's built-in) interpret
backslash sequences in their arguments.
This triggered at least one bug: the error message of "rebase -i" was
turning \t in commit messages into actual tabulations. There may be
others.
Using "printf '%s\n'" instead avoids this bad behavior, and is the form
used by the "say" function.
Noticed-by: David Kastrup <dak@gnu.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since inception, git-blame -L has been documented as accepting 1-based
line numbers. When handed a line number less than 1, -L's behavior is
undocumented and undefined; it's also nonsensical and should be
diagnosed as an error. Do so.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-blame -L is documented as accepting 1-based line numbers. When
handed a line number less than 1, -L's behavior is undocumented and
undefined; it's also nonsensical and should be rejected but is
nevertheless accepted. Demonstrate this shortcoming.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L:RE option of blame/log searches from the end of the previous -L
range, if any. Add new notation -L^:RE to override this behavior and
search from start of file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency with -L/RE/, teach -L:RE to search relative to the end
of the previous -L range, if any.
The new behavior invalidates one test in t4211 which assumes that -L:RE
begins searching at start of file. This test will be resurrected in a
follow-up patch which teaches -L:RE how to override the default relative
search behavior.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L/RE/ option of blame/log searches from the end of the previous -L
range, if any. Add new notation -L^/RE/ to override this behavior and
search from start of file.
The new ^/RE/ syntax is valid only as the <start> argument of
-L<start>,<end>. The <end> argument, as usual, is relative to <start>.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule removes the submodule's work tree
from that of the superproject and the gitlink from the index. But the
submodule's section in .gitmodules is left untouched, which is a leftover
of the now removed submodule and might irritate users (as opposed to the
setting in .git/config, this must stay as a reminder that the user showed
interest in this submodule so it will be repopulated later when an older
commit is checked out).
Let "git rm" help the user by not only removing the submodule from the
work tree but by also removing the "submodule.<submodule name>" section
from the .gitmodules file and stage both. This doesn't happen when the
"--cached" option is used, as it would modify the work tree. This also
silently does nothing when no .gitmodules file is found and only issues a
warning when it doesn't have a section for this submodule. This is because
the user might just use plain gitlinks without the .gitmodules file or has
already removed the section by hand before issuing the "git rm" command
(in which case the warning reminds him that rm would have done that for
him). Only when .gitmodules is found and contains merge conflicts the rm
command will fail and tell the user to resolve the conflict before trying
again.
Also extend the man page to inform the user about this new feature. While
at it promote the submodule sub-section to a chapter as it made not much
sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM".
In t7610 three uses of "git rm submod" had to be replaced with "git rm
--cached submod" because that test expects .gitmodules and the work tree
to stay untouched. Also in t7400 the tests for the remaining settings in
the .gitmodules file had to be changed to assert that these settings are
missing.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git mv" on a submodule moves the submodule's work tree in
that of the superproject. But the submodule's path setting in .gitmodules
is left untouched, which is now inconsistent with the work tree and makes
git commands that rely on the proper path -> name mapping (like status and
diff) behave strangely.
Let "git mv" help here by not only moving the submodule's work tree but
also updating the "submodule.<submodule name>.path" setting from the
.gitmodules file and stage both. This doesn't happen when no .gitmodules
file is found and only issues a warning when it doesn't have a section for
this submodule. This is because the user might just use plain gitlinks
without the .gitmodules file or has already updated the path setting by
hand before issuing the "git mv" command (in which case the warning
reminds him that mv would have done that for him). Only when .gitmodules
is found and contains merge conflicts the mv command will fail and tell
the user to resolve the conflict before trying again.
Also extend the man page to inform the user about this new feature.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the same urlmatch_config_entry() infrastructure, add a new
mode "--get-urlmatch" to the "git config" command, to learn values
for the "virtual" two-level variables customized for the specific
URL.
git config [--<type>] --get-urlmatch <section>[.<key>] <url>
With <section>.<key> fully specified, the configuration data for
<section>.<urlpattern>.<key> for <urlpattern> that best matches the
given <url> is sought (and if not found, <section>.<key> is used)
and reported. For example, with this configuration:
[http]
sslVerify
[http "https://weak.example.com"]
cookieFile = /tmp/cookie.txt
sslVerify = false
You would get
$ git config --bool --get-urlmatch http.sslVerify https://good.example.com
true
$ git config --bool --get-urlmatch http.sslVerify https://weak.example.com
false
With only <section> specified, you can get a list of all variables
in the section with their values that apply to the given URL. E.g
$ git config --get-urlmatch http https://weak.example.com
http.cookiefile /tmp/cookie.txt
http.sslverify false
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the urlmatch_config_entry() to wrap the underlying
http_options() two-level variable parser in order to set
http.<variable> to the value with the most specific URL in the
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty ranges -L,+0 and -L,-0 are nonsensical in the context of blame yet
they are accepted (in fact, both are interpreted as -L1,Y where Y is
end-of-file). Report them as invalid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty ranges -L,+0 and -L,-0 are nonsensical in the context of blame yet
they are accepted. They should be errors. Demonstrate this shortcoming.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty ranges -LX,+0 and -LX,-0 are nonsensical in the context of blame
yet they are accepted (in fact, both are interpreted as -LX,+2). Report
them as invalid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty ranges -LX,+0 and -LX,-0 are nonsensical in the context of blame
yet they are accepted. They should be errors. Demonstrate this
shortcoming.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 12da1d1f added -L support to git-log, a broken bounds check was
copied from git-blame -L which incorrectly allows -LX to extend one line
past end of file without reporting an error. Instead, it generates an
empty range. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
58960978 and 99780b0a added tests which demonstrated bugs (crashes) in
range-set and line-log when handed empty ranges specified via "log
-LX:file" where X is one greater than the last line of the file. After
these tests were added, it was realized that the ability to specify an
empty range is a loophole due to a bug in -L bounds checking. That bug
is slated to be fixed in a subsequent patch.
Unfortunately, the closure of this loophole makes it impossible to
continue checking range-set and line-log behavior with regard to empty
ranges since there is no other way to specify empty ranges via the
command-line. APIs of both facilities are private (file static) so
there likewise is no way to test their behaviors programmatically.
Consequently, retire these two tests.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bounds checking bug allows the X in -LX to extend one line past the
end of file. For example, given a file with 5 lines, -L6 is accepted as
valid. Demonstrate this problem.
While here, also add tests to check that the remaining cases of X and Y
in -LX,Y are handled correctly at and in the vicinity of end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since inception, -LX,Y has correctly reported an out-of-range error when
Y is beyond end of file, however, X was not checked, and an out-of-range
X would cause a crash. 92f9e273 (blame: prevent a segv when -L given
start > EOF; 2010-02-08) attempted to rectify this shortcoming but has
its own off-by-one error which allows X to extend one line past end of
file. For example, given a file with 5 lines:
git blame -L5 foo # OK, blames line 5
git blame -L6 foo # accepted, no error, no output, huh?
git blame -L7 foo # error "fatal: file foo has only 5 lines"
Fix this bug.
In order to avoid regressing "blame foo" when foo is an empty file, the
fix is slightly more complicated than changing '<' to '<='.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add boundary case tests, with and without -L, for empty file; file with
one partial line; file with one full line.
The empty file test without -L is of particular interest. Historically,
this case has been supported (empty blame output) and this test protects
against regression by a subsequent patch fixing an off-by-one bug which
incorrectly accepts -LX where X is one past end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bounds checking bug allows the X in -LX to extend one line past the
end of file. For example, given a file with 5 lines, -L6 is accepted as
valid. Demonstrate this problem.
While here, also add tests to check that the remaining cases of X and Y
in -LX,Y are handled correctly at and in the vicinity of end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking all bogus -L syntax forms in a single test makes it difficult
to identify the offender when one case fails. Decompose this
conglomerate test in order to check each bad syntax case separately.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL included in the header appears to vary from curl version to
curl version. Since we only care about the final few lines, only test
them. However, make sure the blank line after the header is still
included to make sure there are no extra cookie lines.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sub-test 42 of t8001 and t8002 ("blame -L :literal") fails on NetBSD
with the following verbose output:
git annotate -L:main hello.c
Author F (expected 4, attributed 3) bad
Author G (expected 1, attributed 1) good
This is not caused by different behaviour of git blame or annotate on
that platform, but by different test input, in turn caused by a sed
command that forgets to add a newline on NetBSD. Here's the diff of the
commit that adds "goodbye" to hello.c, for Linux:
@@ -1,4 +1,5 @@
int main(int argc, const char *argv[])
{
puts("hello");
+ puts("goodbye");
}
We see that it adds an extra TAB, but that's not a problem. Here's the
same on NetBSD:
@@ -1,4 +1,4 @@
int main(int argc, const char *argv[])
{
puts("hello");
-}
+ puts("goodbye");}
It also adds an extra TAB, but it is missing the newline character
after the semicolon.
The following patch gets rid of the extra TAB at the beginning, but
more importantly adds the missing newline at the end in a (hopefully)
portable way, mentioned in http://sed.sourceforge.net/sedfaq4.html.
The diff becomes this, on both Linux and NetBSD:
@@ -1,4 +1,5 @@
int main(int argc, const char *argv[])
{
puts("hello");
+ puts("goodbye");
}
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not like that our longer term desire is to someday start
accept log messages with NULs in them, so it is wrong to mark a test
that demonstrates "git commit" that correctly fails given such an
input as "expect-failure". "git commit" should fail today, and it
should fail the same way in the future given a message with NUL in it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test file that the UTF-16 rejection test looks for is missing, but this went
unnoticed because the test is expected to fail anyway; as a consequence, the
test fails because the file containing the commit message is missing, and not
because the test file contains a NUL byte. Fix this by including a sample text
file containing a commit message encoded in UTF-16.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Tested-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c334b87b (cat-file: split --batch input lines on whitespace,
2013-07-11) taught `cat-file --batch-check` to split input lines on
the first whitespace, and stash everything after the first token
into the %(rest) output format element. It claimed:
Object names cannot contain spaces, so any input with
spaces would have resulted in a "missing" line.
But that is not correct. Refs, object sha1s, and various peeling
suffixes cannot contain spaces, but some object names can. In
particular:
1. Tree paths like "[<tree>]:path with whitespace"
2. Reflog specifications like "@{2 days ago}"
3. Commit searches like "rev^{/grep me}" or ":/grep me"
To remain backwards compatible, we cannot split on whitespace by
default, hence we will ship 1.8.4 with the commit reverted.
Resurrect its attempt but in a weaker form; only do the splitting
when "%(rest)" is used in the output format. Since that element did
not exist at all before c334b87, old scripts cannot be affected.
The existence of object names with spaces does mean that you
cannot reliably do:
echo ":path with space and other data" |
git cat-file --batch-check="%(objectname) %(rest)"
as it would split the path and feed only ":path" to get_sha1. But
that command is nonsensical. If you wanted to see "and other data"
in "%(rest)", git cannot possibly know where the filename ends and
the "rest" begins.
It might be more robust to have something like "-z" to separate the
input elements. But this patch is still a reasonable step before
having that. It makes the easy cases easy; people who do not care
about %(rest) do not have to consider it, and the %(rest) code
handles the spaces and newlines of "rev-list --objects" correctly.
Hard cases remain hard but possible (if you might get whitespace in
your input, you do not get to use %(rest) and must split and join
the output yourself using more flexible tools). And most
importantly, it does not preclude us from having different splitting
rules later if a "-z" (or similar) option is added. So we can make
the hard cases easier later, if we choose to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog walking logic (git log -g) replaces the true parent list
with the preceding commit in the reflog. This results in bogus commit
diffs when combined with options such as -p; the diff is against the
reflog predecessor, not the parent of the commit.
Save the true parents on the side, extending the functions from the
previous commit. The diff logic picks them up and uses them to show
the correct diffs.
We do have to be somewhat careful about repeated calling of
save_parents(), since the reflog may list a commit more than once. We
now store (commit_list*)-1 to distinguish the "not saved yet" and
"root commit" cases. This lets us preserve an empty parent list even
if save_parents() is repeatedly called.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been passing enough information to enable the
compare-and-swap logic down to the transport layer, but the
transport helper was not passing it to smart-http transport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
The push() method in remote-curl.c is not told and does not pass the
necessary information to underlying send-pack, so this extension
does not yet work. Leave a note in the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the attempt to use "git mv" on a submodule errors out with:
fatal: source directory is empty, source=<src>, destination=<dest>
The reason is that mv searches for the submodule with a trailing slash in
the index, which it doesn't find (because it is stored without a trailing
slash). As it doesn't find any index entries inside the submodule it
claims the directory would be empty even though it isn't.
Fix that by searching for the name without a trailing slash and continue
if it is a submodule. Then rename() will move the submodule work tree just
like it moves a file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP servers may send Set-Cookie headers in a response and expect them
to be set on subsequent requests. By default, libcurl behavior is to
store such cookies in memory and reuse them across requests within a
single session. However, it may also make sense, depending on the
server and the cookies, to store them across sessions. Provide users
an option to enable this behavior, writing cookies out to the same
file specified in http.cookiefile.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems that understand a CRLF as a line ending, tests in this
script that worked on files with CRLF line endings using "grep" to
extract matching lines may lose the CR at the end of lines that
match, causing the actual output not to match the expected output.
* ml/avoid-using-grep-on-crlf-files:
test-lib.sh - define and use GREP_STRIPS_CR
Fix "log -L" command line parsing bugs.
* tr/line-log:
t4211: fix incorrect rebase at f8395edc (range-set: satisfy non-empty ranges invariant)
line-log: fix "log -LN" crash when N is last line of file
range-set: satisfy non-empty ranges invariant
t4211: demonstrate crash when first -L encountered is empty range
t4211: demonstrate empty -L range crash
range-set: fix sort_and_merge_range_set() corner case bug
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wnen I rewrote "cat b.c | wc -l" into "wc -l <b.c" to squash in a
suggestion on the list to this series, I screwed up subsequent
rebase. Fix it up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-set invariants are: ranges must be (1) non-empty, (2) disjoint,
(3) sorted in ascending order.
line_log_data_insert() breaks the non-empty invariant under the
following conditions: the incoming range is empty and the pathname
attached to the range has not yet been encountered. In this case,
line_log_data_insert() assigns the empty range to a new line_log_data
record without taking any action to ensure that the empty range is
eventually folded out. Subsequent range-set functions crash or throw an
assertion failure upon encountering such an anomaly. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-set invariants are: ranges must be (1) non-empty, (2) disjoint,
(3) sorted in ascending order.
During processing, various range-set utility functions break the
invariants (for instance, by adding empty ranges), with the
expectation that a finalizing sort_and_merge_range_set() will restore
sanity.
sort_and_merge_range_set(), however, neglects to fold out empty
ranges, thus it fails to satisfy the non-empty constraint. Subsequent
range-set functions crash or throw an assertion failure upon
encountering such an anomaly. Rectify the situation by having
sort_and_merge_range_set() fold out empty ranges.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare two repositories, src and dst, the latter of which is a
clone of the former (with tracking branches), and push from the
latter into the former, with various --force-with-lease options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corrects the longstanding sloppiness in the implementation of
name-rev that conflated "we take commit-ish" and "differences
between tags and commits do not matter".
* jc/name-rev-exact-ref:
describe: fix --contains when a tag is given as input
name-rev: differentiate between tags and commits they point at
describe: use argv-array
name-rev: allow converting the exact object name at the tip of a ref
name-ref: factor out name shortening logic from name_ref()
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
Add "interactive" mode to "git clean".
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
The "--head" option to "git show-ref" was only to add "HEAD" to the
list of candidate refs to be filtered by the usual rules
(e.g. "--heads" that only show refs under refs/heads). Change the
meaning of the option to always show "HEAD" regardless of what
filtering will be applied to any other ref (this is a backward
incompatible change, so I may need to add an entry to the Release
Notes).
* db/show-ref-head:
show-ref: make --head always show the HEAD ref
The refactoring made for parsing "-L" option recently to support
"git log -L" seems to have broken "git blame -L X,-5" to show 5
lines leading to X.
* es/blame-L-breakage:
blame-options.txt: explain that -L <start> and <end> are optional
blame-options.txt: place each -L option variation on its own line
t8001/t8002 (blame): add blame -L :funcname tests
t8001/t8002 (blame): add blame -L tests
t8001/t8002 (blame): modernize style
line-range: fix "blame -L X,-N" regression
"git show -s" was less discoverable than it should be.
* mm/diff-no-patch-synonym-to-s:
Documentation/git-log.txt: capitalize section names
Documentation: move description of -s, --no-patch to diff-options.txt
Documentation/git-show.txt: include common diff options, like git-log.txt
diff: allow --patch & cie to override -s/--no-patch
diff: allow --no-patch as synonym for -s
t4000-diff-format.sh: modernize style
The mailmap mechanism unnecessarily downcased the e-mail addresses
in the output, and also ignored the human name when it is a single
character name.
This now has become Eric Sunshine's series, even though it still is
under jc/ hierarchy.
* jc/mailmap-case-insensitivity:
mailmap: style fixes
mailmap: debug: avoid passing NULL to fprintf() '%s' conversion specification
mailmap: debug: eliminate -Wformat field precision type warning
mailmap: debug: fix malformed fprintf() format conversion specification
mailmap: debug: fix out-of-order fprintf() arguments
mailmap: do not downcase mailmap entries
t4203: demonstrate loss of uppercase characters in canonical email
mailmap: do not lose single-letter names
t4203: demonstrate loss of single-character name in mailmap entry
This detected a mismerge of one of "add-2.0" topics to the 'jch'
and 'pu' branches.
* jc/simple-add-must-be-a-no-op:
t2202: make sure "git add" (no args) stays a no-op
The name marc.theaimsgroup.com is no longer active, and has
migrated to marc.info.
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid failing "git diff" when core.safecrlf is set to true, because
the user cannot tell where the breakage is in preparation for fixing
and committing.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
This test confirms that a file can be ignored during git p4 sync if if is
excluded in P4 client specification.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
Allow our tests to run with newer Apache.
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* rs/tar-tests:
t5000: test long filenames
t5000: simplify tar-tree tests
t5000: use check_tar for prefix test
t5000: factor out check_tar
t5000, t5003: create directories for extracted files lazily
t5000: integrate export-subst tests into regular tests
Define a common macro for grep needing -U to allow tests to not need
to inquire of specific platforms needing this option. Change
t3032 and t5560 to use this rather than testing explicitly for mingw.
This fixes these two tests on Cygwin.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without "git fetch --prune", remote-tracking branches for a branch
the other side already has removed will stay forever. Some people
want to always run "git fetch --prune".
To accommodate users who want to either prune always or when fetching
from a particular remote, add two new configuration variables
"fetch.prune" and "remote.<name>.prune":
- "fetch.prune" allows to enable prune for all fetch operations.
- "remote.<name>.prune" allows to change the behaviour per remote.
The latter will naturally override the former, and the --[no-]prune
option from the command line will override the configured default.
Since --prune is a potentially destructive operation (Git doesn't
keep reflogs for deleted references yet), we don't want to prune
without users consent, so this configuration will not be on by
default.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" takes a commit and gives it a name based on tags in
its neighbourhood. The command does take a commit-ish but when
given a tag that points at a commit, it should dereference the tag
before computing the name for the commit.
As the whole processing is internally delegated to name-rev, if we
unwrap tags down to the underlying commit when invoking name-rev, it
will make the name-rev issue an error message based on the unwrapped
object name (i.e. either 40-hex object name, or "$tag^0") that is
different from what the end-user gave to the command when the commit
cannot be described. Introduce an internal option --peel-tag to the
name-rev to tell it to unwrap a tag in its input from the command
line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev --stdin" has been fixed to convert an object name that
points at a tag to a refname of the tag. The codepath to handle its
command line arguments, however, fed the commit that the tag points
at to the underlying naming machinery.
With this fix, you will get this:
$ git name-rev --refs=tags/\* --name-only $(git rev-parse v1.8.3 v1.8.3^0)
v1.8.3
v1.8.3^0
which is the same as what you would get from the fixed "--stdin" variant:
$ git rev-parse v1.8.3 v1.8.3^0 | git name-rev --refs=tags/\* --name-only
v1.8.3
v1.8.3^0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch-check=<format>" is added, primarily to allow
on-disk footprint of objects in packfiles (often they are a lot
smaller than their true size, when expressed as deltas) to be
reported.
* jk/in-pack-size-measurement:
pack-revindex: radix-sort the revindex
pack-revindex: use unsigned to store number of objects
cat-file: split --batch input lines on whitespace
cat-file: add %(objectsize:disk) format atom
cat-file: add --batch-check=<format>
cat-file: refactor --batch option parsing
cat-file: teach --batch to stream blob objects
t1006: modernize output comparisons
teach sha1_object_info_extended a "disk_size" query
zero-initialize object_info structs
Add a command to allow previewing the contents locally before
pushing it out, when working with a MediaWiki remote.
I personally do not think this belongs to Git. If you are working
on a set of AsciiDoc source files, you sure do want to locally
format to preview what you will be pushing out, and if you are
working on a set of C or Java source files, you do want to test it
before pushing it out, too. That kind of thing belongs to your
build script, not to your SCM.
But I'll let it pass, as this is only a contrib/ thing.
* bp/mediawiki-preview:
git-remote-mediawiki: add preview subcommand into git mw
git-remote-mediawiki: add git-mw command
git-remote-mediawiki: factoring code between git-remote-mediawiki and Git::Mediawiki
git-remote-mediawiki: update tests to run with the new bin-wrapper
git-remote-mediawiki: add a git bin-wrapper for developement
wrap-for-bin: make bin-wrappers chainable
git-remote-mediawiki: introduction of Git::Mediawiki.pm
Logic to auto-detect character encodings in the commit log message
did not reject overlong and invalid UTF-8 characters.
* bc/commit-invalid-utf8:
commit: reject non-characters
commit: reject overlong UTF-8 sequences
commit: reject invalid UTF-8 codepoints
* es/overlapping-range-set:
range_set: fix coalescing bug when range is a subset of another
t4211: fix broken test when one -L range is subset of another
"git clone -s/-l" is a filesystem level copy and does not offer any
protection against source repository being corrupt. While the
connectivity validation checks commits and trees being readable, it
made the otherwise instantaneous local modes of clone much more
expensive, without protecting blob data from bitflips.
* jk/maint-clone-shared-no-connectivity-validation:
clone: drop connectivity check for local clones
"git rebase [-i]" used to leave just "rebase" as its reflog message
for some operations. This rewords them to be more informative.
* rr/rebase-reflog-message-reword:
rebase -i: use a better reflog message
rebase: use a better reflog message
git-blame inherited "-L :funcname" support when "-L :funcname:file" was
implemented for git-log. Add tests.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the exception of a couple "corner case" checks in t8003 (and some
indirect tests in t4211 of -L parsing code shared by log -L), there is
no systematic checking of blame -L. Add tests to check blame -L
directly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular,
- indent with tabs
- cuddle test description and opening body quote with test_expect_foo
- normalize test descriptions and case
- remove whitepsace following redirection operator
- use standardized filenames (such as "actual", "expected")
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docs seem to say that doing
git show-ref --head --tags
would show both the HEAD ref and all the tag refs. However, doing
both --head and either of --tags or --heads would filter out the HEAD
ref.
Also update the documentation to describe the new behavior and add
tests for the show-ref command.
[jc: Doug did proofread the tests, but it was done by me and bugs in
it are mine].
Signed-off-by: Doug Bell <madcityzen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All options that trigger a patch output now override --no-patch.
The case of --binary deserves extra attention: the name may suggest that
it turns a normal patch into a binary patch, but it actually already
enables patch output when normally disabled (e.g. "git log --binary"
displays a patch), hence it makes sense for "git show --no-patch
--binary" to display the binary patch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows the usual convention of having a --no-foo option to negate
--foo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails on Cygwin where the default system configuration does not
support case sensitivity (only case retention), so don't run the test on
such systems.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" parsed patches that add new files, generated by programs
other than Git, incorrectly. This is an old breakage in v1.7.11.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
"git pull" into nothing trashed "local changes" that were in the
index.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
Many "git submodule" operations did not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
Logic used by git-send-email to suppress cc mishandled names like "A
U. Thor" <author@example.xz>, where the human readable part needs to
be quoted (the user input may not have the double quotes around the
name, and comparison was done between quoted and unquoted strings).
It also mishandled names that need RFC2047 quoting.
* mt/send-email-cc-match-fix:
send-email: sanitize author when writing From line
send-email: add test for duplicate utf8 name
test-send-email: test for pre-sanitized self name
t/send-email: test suppress-cc=self with non-ascii
t/send-email: add test with quoted sender
send-email: make --suppress-cc=self sanitize input
t/send-email: test suppress-cc=self on cccmd
send-email: fix suppress-cc=self on cccmd
t/send-email.sh: add test for suppress-cc=self
In addition to the choice from "rebase, merge, or checkout-detach",
allow a custom command to be used in "submodule update" to update
the working tree of submodules.
* cp/submodule-custom-update:
submodule update: allow custom command to update submodule working tree
"git format-patch" learned "--from[=whom]" option, which sets the
"From: " header to the specified person (or the person who runs the
command, if "=whom" part is missing) and move the original author
information to an in-body From: header as necessary.
* jk/format-patch-from:
teach format-patch to place other authors into in-body "From"
pretty.c: drop const-ness from pretty_print_context
The configuration variable "merge.ff" was cleary a tri-state to
choose one from "favor fast-forward when possible", "always create
a merge even when the history could fast-forward" and "do not
create any merge, only update when the history fast-forwards", but
the command line parser did not implement the usual convention of
"last one wins, and command line overrides the configuration"
correctly.
* mv/merge-ff-tristate:
merge: handle --ff/--no-ff/--ff-only as a tri-state option
The email addresses in the records read from the .mailmap file are
downcased very early, and then used to match against e-mail
addresses in the input. Because we do use case insensitive version
of string list to manage these entries, there is no need to do this,
and worse yet, downcasing the rewritten/canonical e-mail read from
the .mailmap file loses information.
Stop doing that, and also make the string list used to keep multiple
names for an mailmap entry case insensitive (the code that uses the
list, lookup_prefix(), expects a case insensitive match).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The email addresses read from .mailmap are downcased before being
inserted into the mailmap data structure, which undesirably loses
information. It is impossible, for instance, to map <first.last@host>
to <First.Last@host>. Demonstrate this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In parse_name_and_email() function, there is this line:
*name = (nstart < nend ? nstart : NULL);
When the function is given a buffer "A <A@example.org> <old@x.z>",
nstart scans from the beginning of the buffer, skipping whitespaces
(there isn't any, so nstart points at the buffer), while nend starts
from one byte before the first '<' and skips whitespaces backwards
and stops at the first non-whitespace (i.e. it hits "A" at the
beginning of the buffer). nstart == nend in this case for a
single-letter name, and an off-by-one error makes it fail to pick up
the name, which makes the entry equivalent to
<A@example.org> <old@x.z>
without the name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug in mailmap.c:parse_name_and_email() causes it to overlook the
single-character name in "A <user@host>" and parse it only as
"<user@host>". Demonstrate this problem.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the command-line interface of check-mailmap.
(Actual .mailmap functionality is already covered by existing tests.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To test check-ignore's --stdin feature, we use two fifos to
send and receive data. We carefully keep a descriptor to its
input open so that it does not receive EOF between input
lines. However, we do not do the same for its output. That
means there is a potential race condition in which
check-ignore has opened the output pipe once (when we read
the first line), and then writes the second line before we
have re-opened the pipe.
In that case, check-ignore gets a SIGPIPE and dies. The
outer shell then tries to open the output fifo but blocks
indefinitely, because there is no writer. We can fix it by
keeping a descriptor open through the whole procedure.
This should also help if check-ignore dies for any other
reason (we would already have opened the fifo and would
therefore not block, but just get EOF on read).
However, we are technically still susceptible to
check-ignore dying early, before we have opened the fifo.
This is an unlikely race and shouldn't generally happen in
practice, though, so we can hopefully ignore it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we get an input line to --batch or --batch-check that
looks like "HEAD foo bar", we will currently feed the whole
thing to get_sha1(). This means that to use --batch-check
with `rev-list --objects`, one must pre-process the input,
like:
git rev-list --objects HEAD |
cut -d' ' -f1 |
git cat-file --batch-check
Besides being more typing and slightly less efficient to
invoke `cut`, the result loses information: we no longer
know which path each object was found at.
This patch teaches cat-file to split input lines at the
first whitespace. Everything to the left of the whitespace
is considered an object name, and everything to the right is
made available as the %(reset) atom. So you can now do:
git rev-list --objects HEAD |
git cat-file --batch-check='%(objectsize) %(rest)'
to collect object sizes at particular paths.
Even if %(rest) is not used, we always do the whitespace
split (which means you can simply eliminate the `cut`
command from the first example above).
This whitespace split is backwards compatible for any
reasonable input. Object names cannot contain spaces, so any
input with spaces would have resulted in a "missing" line.
The only input hurt is if somebody really expected input of
the form "HEAD is a fine-looking ref!" to fail; it will now
parse HEAD, and make "is a fine-looking ref!" available as
%(rest).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `cat-file --batch-check` command can be used to quickly
get information about a large number of objects. However, it
provides a fixed set of information.
This patch adds an optional <format> option to --batch-check
to allow a caller to specify which items they are interested
in, and in which order to output them. This is not very
exciting for now, since we provide the same limited set that
you could already get. However, it opens the door to adding
new format items in the future without breaking backwards
compatibility (or forcing callers to pay the cost to
calculate uninteresting items).
Since the --batch option shares code with --batch-check, it
receives the same feature, though it is less likely to be of
interest there.
The format atom names are chosen to match their counterparts
in for-each-ref. Though we do not (yet) share any code with
for-each-ref's formatter, this keeps the interface as
consistent as possible, and may help later on if the
implementations are unified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test that should have failed but didn't revealed a bug that needs
to be corrected.
* jc/t1512-fix:
get_short_sha1(): correctly disambiguate type-limited abbreviation
t1512: correct leftover constants from earlier edition
"git stash save" is not just about "saving" the local changes, but
also is to restore the working tree state to that of HEAD. If you
changed a non-directory into a directory in the local change, you
may have untracked files in that directory, which have to be killed
while doing so, unless you run it with --include-untracked. Teach
the command to detect and error out before spreading the damage.
This needed a small fix to "ls-files --killed".
* pb/stash-refuse-to-kill:
git stash: avoid data loss when "git stash save" kills a directory
treat_directory(): do not declare submodules to be untracked
"git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
In modern tests, we typically put output into a file and
compare it with test_cmp. This is nicer than just comparing
via "test", and much shorter than comparing via "test" and
printing a custom message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When coalescing ranges, sort_and_merge_range_set() unconditionally
assumes that the end of a range being folded into a preceding range
should become the end of the coalesced range. This assumption, however,
is invalid when one range is a subset of another. For example, given
ranges 1-5 and 2-3 added via range_set_append_unsafe(),
sort_and_merge_range_set() incorrectly coalesces them to range 1-3
rather than the correct union range 1-5. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4211 attempts to test multiple git-log -L ranges where one range is a
superset of the other, and falsely succeeds because its "expected"
output is incorrect.
Overlapping -L ranges handed to git-log are coalesced by
line-log.c:sort_and_merge_range_set() into a set of non-overlapping,
disjoint ranges. When one range is a subset of another,
sort_and_merge_range_set() should coalesce both ranges to the superset
range, but instead the coalesced range often is incorrectly truncated to
the end of the subset range. For example, ranges 2-8 and 3-4 are
coalesced incorrectly to 2-4.
One can observe this incorrect behavior with git-log -L using the test
repository created by t4211. The superset/subset ranges t4211 employs
are 4-$ and 8-12 (where $ represents end-of-file). The coalesced range
should be 4-$. Manually invoking git-log with the same ranges the test
employs, we see:
% git log -L 4:a.c simple |
awk '/^commit [0-9a-f]{40}/ { print substr($2,1,7) }'
4659538
100b61a
39b6eb2
a6eb826
f04fb20
de4c48a
% git log -L 8,12:a.c simple | awk ...
f04fb20
de4c48a
% git log -L 4:a.c -L 8,12:a.c simple | awk ...
a6eb826
f04fb20
de4c48a
This last output is incorrect. 8-12 is a subset of 4-$, hence the output
of the coalesced range should be the same as the 4-$ output shown first.
In fact, the above incorrect output is the truncated bogus range 4-12:
% git log -L 4,12:a.c simple | awk ...
a6eb826
f04fb20
de4c48a
Fix the test to correctly fail in the presence of the
sort_and_merge_range_set() coalescing bug. Do so by changing the
"expected" output to the commits mentioned in the 4-$ output above.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode clause D14 defines all characters U+nFFFE and U+nFFFF (where
0 <= n <= 10h) as well as the range U+FDD0..U+FDEF as non-characters,
reserved for internal use only. Disallow these characters in commit
messages as they are normally not recommended for interchange.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells do not understand the one-line construct, and instead need
FOO=bar &&
export FOO
Detect this in the test-lint target.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The == operator as an alias to = is not POSIX. This doesn't actually
matter for the execution of the script, because it only runs when the
shell is bash. However, it trips up test-lint, so it's nicer to use
the standard form.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, bin-wrappers overwrites GITPERLLIB. If we want to chain to
those scripts and define GITPERLLIB before, our changes will be
discarded.
This patch makes the bin-wrappers prepend their modifications to
GITPERLLIB rather than redefining it. It also unset GITPERLLIB in the
test-suite to prevent broken $GITPERLLIB in the user's configuration
from interfering with the testsuite.
The codes using GIT_TEMPLATE_DIR and GIT_TEXTDOMAINDIR handle only one
path in each of this variable so this new behavior would be useless on
those variables.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0433ad1 (clone: run check_everything_connected,
2013-03-25) added the same connectivity check to clone that
we use for fetching. The intent was to provide enough safety
checks that "git clone git://..." could be counted on to
detect bit errors and other repo corruption, and not
silently propagate them to the clone.
For local clones, this turns out to be a bad idea, for two
reasons:
1. Local clones use hard linking (or even shared object
stores), and so complete far more quickly. The time
spent on the connectivity check is therefore
proportionally much more painful.
2. Local clones do not actually meet our safety guarantee
anyway. The connectivity check makes sure we have all
of the objects we claim to, but it does not check for
bit errors. We will notice bit errors in commits and
trees, but we do not load blob objects at all. Whereas
over the pack transport, we actually recompute the sha1
of each object in the incoming packfile; bit errors
change the sha1 of the object, which is then caught by
the connectivity check.
This patch drops the connectivity check in the local case.
Note that we have to revert the changes from 0433ad1 to
t5710, as we no longer notice the corruption during clone.
We could go a step further and provide a "verify even local
clones" option, but it is probably not worthwhile. You can
already spell that as "cd foo.git && git fsck && git clone ."
or as "git clone --no-local foo.git".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For testing truncated log messages 'commit_msg' function uses `sed` to
cut a message. On various platforms `sed` behaves differently and
results of its work depend on locales installed. So, avoid using `sed`.
Use predefined expected outputs instead of calculated ones.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In de6029a (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26) 'complex-subject' test was changed.
Revert it back, because that change actually removed tests for "%b"
and "%s" with i18n.commitEncoding set. Also, add two more tests for
mentioned above "%b" and "%s" to test encoding conversions with no
i18n.commitEncoding set.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function 'test_format' has become harder to read after its change in
de6029a2 (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26). Simplify it by moving its "should we
expect it to fail?" parameter to the end.
Note, current code does not use this last parameter as far as there
are no tests expected to fail. We can keep that for future use.
Also, reformat comments.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Improved-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previuos commit de6029a (pretty: Add failing tests: --format output
should honor logOutputEncoding, 2013-06-26) single quotes were replaced
with double quotes to make "$(commit_msg)" expression in heredoc to
work. The same effect can be achieved by using "EOF" as a heredoc
delimiter instead of "\EOF".
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
Do not use FIFOs on cygwin, they do not work. Cygwin includes
coreutils, so has mkfifo, and that command does something. However,
the resultant named pipe is known (on the Cygwin mailing list at
least) to not work correctly.
This disables PIPE for Cygwin, allowing t0008.sh to complete (all other
tests in that file work correctly).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both "iso8859-1" and "iso-8859-1" are understood as latin-1 by
modern platforms, but the latter is not understood by older
platforms;update tests to use the former.
This is in line with 3994e8a9 (t4201: use ISO8859-1 rather than
ISO-8859-1, 2009-12-03), which did the same.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code accepts pseudo-UTF-8 sequences that encode a character with more
bytes than necessary. Reject such sequences, since they are not valid UTF-8.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code already contains code for validating UTF-8, but it does not
check for invalid values, such as guaranteed non-characters and surrogates. Fix
this by explicitly checking for and rejecting such characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/empty-archive:
t5004: resurrect original empty tar archive test
t5004: avoid using tar for checking emptiness of archive
Conflicts:
t/t5004-archive-corner-cases.sh
"git log -c --follow $path" segfaulted upon hitting the commit that
renamed the $path being followed.
* cb/log-follow-with-combined:
fix segfault with git log -c --follow
When a reflog notation is used for implicit "current branch", we did
not say which branch, and worse said "branch ''".
* rr/die-on-missing-upstream:
sha1_name: fix error message for @{<N>}, @{<date>}
sha1_name: fix error message for @{u}
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --depth option to the add and update commands of "git submodule",
which is then passed on to the clone command. This is useful when the
submodule(s) are huge and you're not really interested in anything but
the latest commit.
Tests are added and some indention adjustments were made to conform to the
rest of the testfile on "submodule update can handle symbolic links in pwd".
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can set submodule.$name.update to '!command' which will cause
'command' to be run instead of checkout/merge/rebase. This allows
the user finer-grained control over how the update is done.
The primary motivation for this was interoperability with stgit;
however being able to intercept the submodule update process may
prove useful for integrating with or extending other tools.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge strategy and its options can be specified in `git rebase`,
but with `--interactive`, they were completely ignored.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earliest iteration of this test script used a magic string
110282 as the common prefix for ambiguous object names, but the
final edition switched the common prefix to 0000000000 (10 "0"s).
Unfortunately, instances of the original prefix were left in the
comments and a few tests. Replace them with the correct constants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash save" is about saving the local change to the working tree,
but also about restoring the state of the last commit to the working
tree. When a local change is to turn a non-directory to a directory,
in order to restore the non-directory, everything in the directory
needs to be removed.
Which is fine when running "git stash save --include-untracked",
but without that option, untracked, newly created files in the
directory will have to be discarded, if the state you are restoring
to has a non-directory at the same path as the directory.
Introduce a safety valve to fail the operation in such case, using
the "ls-files --killed" which was designed for this exact purpose.
The "stash save" is stopped when untracked files need to be
discarded because their leading path ceased to be a directory, and
the user is required to pass --force to really have the data
removed.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the working tree walker encounters a directory, it asks the
function treat_directory() if it should descend into it, show it as
an untracked directory, or do something else. When the directory is
the top of the submodule working tree, we used to say "That is an
untracked directory", which was bogus.
It is an entity that is tracked in the index of the repository we
are looking at, and that is not to be descended into it. Return
path_none, not path_untracked, to report that.
The existing case that path_untracked is returned for a newly
discovered submodule that is not tracked in the index (this only
happens when DIR_NO_GITLINKS option is not used) is unchanged, but
that is exactly because the submodule is not tracked in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original way to specify remote repository using .git/branches/
used to have a nifty feature. The code to support the feature was
still in a function but the caller was changed not to call it 5
years ago, breaking that feature and leaving the supporting code
unreachable.
* rr/remote-branch-config-refresh:
t/t5505-remote: test multiple push/pull in remotes-file
ls-remote doc: don't encourage use of branches-file
ls-remote doc: rewrite <repository> paragraph
ls-remote doc: fix example invocation on git.git
t/t5505-remote: test url-with-# in branches-file
remote: remove dead code in read_branches_file()
t/t5505-remote: use test_path_is_missing
t/t5505-remote: test push-refspec in branches-file
t/t5505-remote: modernize style
Code clean-up for in-prompt status script (in contrib/).
* ed/color-prompt:
git-prompt.sh: add missing information in comments
git-prompt.sh: do not print duplicate clean color code
t9903: remove redundant tests
git-prompt.sh: refactor colored prompt code
t9903: add tests for git-prompt pcmode
Having multiple "fixup!" on a line in the rebase instruction sheet
did not work very well with "git rebase -i --autosquash".
* ap/rebase-multiple-fixups:
lib-rebase: style: use write_script, <<-\EOF
rebase -i: handle fixup! fixup! in --autosquash
* sg/bash-prompt:
bash prompt: mention that PROMPT_COMMAND mode is faster
bash prompt: avoid command substitution when finalizing gitstring
bash prompt: avoid command substitution when checking for untracked files
bash prompt: use bash builtins to check stash state
bash prompt: use bash builtins to check for unborn branch for dirty state
bash prompt: combine 'git rev-parse' for detached head
bash prompt: combine 'git rev-parse' executions in the main code path
bash prompt: use bash builtins to find out current branch
bash prompt: use bash builtins to find out rebase state
bash prompt: run 'git rev-parse --git-dir' directly instead of __gitdir()
bash prompt: return early from __git_ps1() when not in a git repository
bash prompt: print unique detached HEAD abbreviated object name
bash prompt: add a test for symbolic link symbolic refs
completion, bash prompt: move __gitdir() tests to completion test suite
bash prompt: use 'write_script' helper in interactive rebase test
bash prompt: fix redirection coding style in tests
Update documentation to match more recent realities.
* wk/doc-in-linux-3.x-era:
Documentation: Update 'linux-2.6.git' -> 'linux.git'
Documentation: Update the NFS remote examples to use the staging repo
doc/clone: Pick more compelling paths for the --reference example
doc/clone: Remove the '--bare -l -s' example
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
OS X's sed only accepts basic regular expressions, which does not
allow the + quantifier. However '..*' (anything, followed by zero or
more anything) is the same as '.\+' (one or more anything) and valid
in any regular expression language.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.8.3.3
check-ignore doc: fix broken link to ls-files page
test: spell 'ls-files --delete' option correctly in test descriptions
"git diff" learned a mode that ignores hunks whose change consists
only of additions and removals of blank lines, which is the same as
"diff -B" (ignore blank lines) of GNU diff.
* ap/diff-ignore-blank-lines:
diff: add --ignore-blank-lines option
Allow various subcommands of "git submodule" to be run not from the
top of the working tree of the superproject.
* jk/submodule-subdirectory-ok:
submodule: drop the top-level requirement
rev-parse: add --prefix option
submodule: show full path in error message
t7403: add missing && chaining
t7403: modernize style
t7401: make indentation consistent
ae75342 test-lib: rearrange start/end of test_expect_* and test_skip
changed the way tests are started/stopped, but did not update the perf
tests. They were therefore giving the wrong output, because of the
wrong test count. Fix this by starting and stopping the tests
correctly.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning with "git clone --depth N" while fetch.fsckobjects (or
transfer.fsckobjects) is set to true did not tell the cut-off points
of the shallow history to the process that validates the objects and
the history received, causing the validation to fail.
* 'nd/clone-connectivity-shortcut' (early part):
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
Logic used by git-send-email to suppress cc mishandled names that
need RFC2047 quoting.
* mt/send-email-cc-match-fix:
send-email: sanitize author when writing From line
send-email: add test for duplicate utf8 name
"git pull" into nothing trashed "local changes" that were in the
index, and this avoids it.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
Plug a small leak in checkout.
* bc/checkout-tracking-name-plug-leak:
t/t9802: explicitly name the upstream branch to use as a base
builtin/checkout.c: don't leak memory in check_tracking_name
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first. This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).
In the todo list, the full commit message is preserved, in case it provides
useful cues to the user. A test helper set_cat_todo_editor is introduced to
check this.
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for the codepath to parse patches that add new files, generated
by programs other than Git. THis is an old breakage in v1.7.11 and
will need to be merged down to the maintanance tracks.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
Many "git submodule" operations do not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After refactoring __git_ps1_colorize_gitstring, codepaths for bash and zsh
became mostly common and tests for bash and zsh became redundant.
Remove tests for zsh. Keep one minimal test that stress the difference
in codepaths for bash and zsh.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt.sh lacks tests for PROMPT_COMMAND mode.
Add tests for:
* pcmode prompt without colors
* pcmode prompt with colors for bash
* pcmode prompt with colors for zsh
Having these tests enables an upcoming refactor in
a safe way.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch adds failing tests for the next patch that fixes them.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test cases are skipped on Windows by marking with POSIX prereq.
This is because arguments look like absolute paths (such as /a/b)
for regular Windows programs (*.exe executables, no bash scripts)
are changed to Windows paths (like C:/msysgit/a/b).
There is no cygpath nor equivalent on msysGit, but it is easy to
write one. New subcommand "mingw_path" is added in test-path-utils,
so that we can get the expected absolute paths on Windows. E.g.
COMMAND LINE Linux output Windows output
================================== ============ ===============
test-path-utils mingw_path / / C:/msysgit
test-path-utils mingw_path /a/b/ /a/b/ C:/msysgit/a/b/
With this utility, most skipped test cases in t0060 can be turned on
to be tested correctly on Windows.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Original design of relative_path() is simple, just strip the prefix
(*base) from the absolute path (*abs).
In most cases, we need a real relative path, such as: ../foo,
../../bar. That's why there is another reimplementation
(path_relative()) in quote.c.
Borrow some codes from path_relative() in quote.c to refactor
relative_path() in path.c, so that it could return real relative
path, and user can reuse this function without reimplementing
his/her own. The function path_relative() in quote.c will be
substituted, and I would use the new relative_path() function when
implementing the interactive git-clean later.
Different results for relative_path() before and after this refactor:
abs path base path relative (original) relative (refactor)
======== ========= =================== ===================
/a/b /a/b . ./
/a/b/ /a/b . ./
/a /a/b/ /a ../
/ /a/b/ / ../../
/a/c /a/b/ /a/c ../c
/x/y /a/b/ /x/y ../../x/y
a/b/ a/b/ . ./
a/b/ a/b . ./
a a/b a ../
x/y a/b/ x/y ../../x/y
a/c a/b a/c ../c
(empty) (null) (empty) ./
(empty) (empty) (empty) ./
(empty) /a/b (empty) ./
(null) (null) (null) ./
(null) (empty) (null) ./
(null) /a/b (segfault) ./
You may notice that return value "." has been changed to "./".
It is because:
* Function quote_path_relative() in quote.c will show the relative
path as "./" if abs(in) and base(prefix) are the same.
* Function relative_path() is called only once (in setup.c), and
it will be OK for the return value as "./" instead of ".".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add subcommand "relative_path" in test-path-utils, and add test cases
in t0060.
Johannes tested an earlier version of this patch on Windows, and
found that some relative_path tests should be skipped on
Windows. This is because the bash on Windows rewrites arguments of
regular Windows programs, such as git and the test helpers, if the
arguments look like absolute POSIX paths. As a consequence, the
actual tests performed are not what the tests scripts expect.
The tests that need *not* be skipped are those where the two paths passed
to 'test-path-utils relative_path' have the same prefix and the result is
expected to be a relative path. This is because the rewriting changes
"/a/b" to "D:/Src/MSysGit/a/b", and when both inputs are extended the same
way, this just cancels out in the relative path computation.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user will not be able to start to guess where in the
contents in the working tree the offending unsafe CR lies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "rebase --autostash" update made it impossible to recover
with "git am --abort" from a repository where "git am" without mbox
was run by mistake and then was killed with "^C".
* rr/am-quit-empty-then-abort-fix:
t/am: use test_path_is_missing() where appropriate
am: handle stray $dotest directory
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce test_pushdefault_workflows(), and test that all push.default
modes work with central and triangular workflows as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup creates two bare repositories: repo1 and repo2, but
test_push_commit() hard-codes checking in repo1 for the actual output.
Generalize it and its caller, test_push_success(), to optionally accept
a third argument to specify the name of the repository to check for
actual output. We will use this in the next patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Currently __gitdir() is duplicated in the git completion and prompt
scripts, while its tests are in the prompt test suite. This patch
series is about to change __git_ps1() in a way that it won't need
__gitdir() anymore and __gitdir() will be removed from the prompt
script.
So move all __gitdir() tests from the prompt test suite over to the
completion test suite. Update the setup tests so that they perform
only those steps that are necessary for each test suite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
This reverts commit 1a22bd31f0, reversing
changes made to 3e7a5b489e.
It makes it impossible to "git commit" when status.short is set, and
also "git status --porcelain" output is affected by status.branch.
Now that the "checkout" invoked internally from "rebase -i" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase -i: checkout master
instead of the old
rebase -i
As all the calls git-rebase--interactive make to underlying git
commands that leave reflog messages are preceded by the internal
comment_for_reflog helper function, which uses the original value of
the GIT_REFLOG_ACTION variable it saw when it first started, the new
assignments to GIT_REFLOG_ACTION actively contaminate the value of
the variable, knowing that it will be reset to a sane value before
it is used again. This does not generally hold true but it should
suffice for now.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase-tests:
rebase topology tests: fix commit names on case-insensitive file systems
tests: move test for rebase messages from t3400 to t3406
t3406: modernize style
add tests for rebasing merged history
add tests for rebasing root
add tests for rebasing of empty commits
add tests for rebasing with patch-equivalence present
add simple tests of consistency across rebase types
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* rr/rebase-autostash:
rebase: finish_rebase() in noop rebase
rebase: finish_rebase() in fast-forward rebase
rebase: guard against missing files in read_basic_state()
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Because fast-import.c::tree_content_remove does not check for the empty
path, it is not possible to move the root tree to a subdirectory.
Instead the error "Path not in branch" is produced (note the double
space where the empty path has been inserted).
Fix this by explicitly checking for the empty path and handling it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 178e1de (fast-import: don't allow 'ls' of path with empty
components, 2012-03-09) restricted paths which:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid).
However, the implementation also caught the empty path, which should
represent the root tree. Relax this restriction so that the empty path
is explicitly allowed and refers to the root tree.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given an empty path, fast-import sometimes reports "missing"
instead of using the root tree object. On top of this, for "ls" and
file copy (but not move) it dies with "Empty path component found in
input".
Document this behaviour with failing test cases.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --valgrind-parallel=<n> option, we support running the
tests in a single test script under valgrind in parallel using 'n'
processes.
This really follows the dumbest approach possible, as follows:
* We spawn the test script 'n' times, using a throw-away
TEST_OUTPUT_DIRECTORY. Each of the instances is given options that
ensures that it only runs every n-th test under valgrind, but
together they cover the entire range.
* We add up the numbers from the individual tests, and provide the
usual output.
This is really a gross hack at this point, and should be improved. In
particular we should keep the actual outputs somewhere more easily
discoverable, and summarize them to the user.
Nevertheless, this is already workable and gives a speedup of more
than 2 on a dual-core (hyperthreaded) machine, using n=4. This is
expected since the overhead of valgrind is so big (on the order of 20x
under good conditions, and a large startup overhead at every git
invocation) that redundantly running the non-valgrind tests in between
is not that expensive.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not really meant for external use, and thus not documented. It
allows the next commit to neatly distinguish between sub-tests and the
main run.
The format is intentionally not valid TAP. The use in the next commit
would not result in anything valid either way, and it seems better to
make it obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --valgrind-only=<pattern> option, one can enable
--valgrind at a per-test granularity, exactly analogous to
--verbose-only from the previous commit.
The options are wired such that --valgrind implies --verbose (as
before), but --valgrind-only=<pattern> implies
--verbose-only=<pattern> unless --verbose is also in effect.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --verbose-only=<pattern> option, one can enable --verbose
at a per-test granularity. The pattern is matched against the test
number, e.g.
./t0000-basic.sh --verbose-only='2[0-2]'
to see only the full output of test 20-22, while showing the rest in the
one-liner format.
As suggested by Jeff King, this takes care to wrap the entire
test_expect_* block, but nothing else, in the verbose toggling. We
can use the test_start/end functions from the previous commit for the
purpose.
This is arguably not *too* useful on its own, but makes the next patch
easier to follow.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000 contains some light self-tests of test-lib.sh, but --verbose was
not covered. Add a test.
The only catch is that the presence of a test harness influences the
output (specifically, the presence of some empty lines). So we need
to unset TEST_HARNESS or set it to a known value. Leaving it unset
leads to spurious test failures in the final summary, which come from
the subtest. So we always set it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace instances of ! test -f with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0442743 introduced an <IfVersion> directive near the
top of the apache config file. However, at that point we
have not yet checked for and loaded the mod_version module.
This means that the directive will behave oddly if
mod_version is dynamically loaded, failing to match when it
should.
We can fix this by moving the whole block below the
LoadModule directive for mod_version.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the --topo/date-order test vector a bit and mark the author
dates of two commits (a2 and a3) earlier than their own committer
dates, making them much older than other commits that are made on
parallel branches to simulate the case where a long running topic
was rebased recently.
They will show up as recent in the --date-order output due to their
timestamps, but they appear a lot later in the --author-date-order
output, even though their committer timestamp says otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce on_dates helper that is similar to on_committer_date but
also sets the author date, not just the committer date.
At this step, just set the same timestamp to the author date as the
committer date, as no test looks at author date yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--date-order" output is a slight twist of "--topo-order" in
that commits from parallel histories are shown in their committer
date order without an attempt to clump commits from a single line
of history together like --topo-order does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on_committer_date helper in t/lib-t6000 is used in t6002 and
t6003 with timestamps on a single day within a single minute
(i.e. 1971-08-16 00:00) and the tests repeat this over and over.
The actual value of the timestamp, however, does not matter very
much; only their relative ordering does.
Introduce another helper to expand only the suffix of the timestamp
to a full timestamp to make the lines shorter, and use it in this
helper. Also, because all the commits in the test are made with
specific GIT_COMMITTER_DATE, stop unsetting it at the end of the
helper.
We'll be specifying the author timestamp to these test commits in a
later patch, which will be helped with this change.
Also remove a test that was commented-out from t6003; it used to
test a commit with the same parent listed twice, which was allowed
by mistake but was fixed long time ago.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit 81d340d4, we did not print any error message
if a remote transport helper died unexpectedly. If a helper
did not print any error message (e.g., because it crashed),
the user could be left confused. That commit tried to
rectify the situation by printing a note that the helper
exited unexpectedly.
However, this makes a much more common case worse: when a
helper does die with a useful message, we print the extra
"Reading from 'git-remote-foo failed" message. This can also
end up confusing users, as they may not even know what
remote helpers are (e.g., the fact that http support comes
through git-remote-https is purely an implementation detail
that most users do not know or care about).
Since we do not have a good way of knowing whether the
helper printed a useful error, and since the common failure
mode is for it to do so, let's default to remaining quiet.
Debuggers can dig further by setting GIT_TRANSPORT_HELPER_DEBUG.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2901bbe (apply: free patch->{def,old,new}_name fields, 2012-03-21)
cleaned up the memory management of filenames in the patches, but
forgot that find_name_traditional() can return NULL as a way of saying
"I couldn't find a name".
That NULL unfortunately gets passed into xstrdup() next, resulting in
a segfault. Use null_strdup() so as to safely propagate the null,
which will let us emit the correct error message.
Reported-by: DevHC on #git
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests that check the behaviour of symbolic links stored in the
index or the tree objects do not have to be skipped on a filesystem
that lack symbolic link support.
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
The logic for pulling into an unborn branch was originally
designed to be used on a newly-initialized repository
(d09e79c, git-pull: allow pulling into an empty repository,
2006-11-16). It thus did not initially deal with
uncommitted changes in the unborn branch. The case of an
_unstaged_ untracked file was fixed by 4b3ffe5 (pull: do not
clobber untracked files on initial pull, 2011-03-25).
However, it still clobbered existing staged files, both when
the file exists in the merged commit (it will be
overwritten), and when it does not (it will be deleted).
We fix this by doing a two-way merge, where the "current"
side of the merge is an empty tree, and the "target" side is
HEAD (already updated to FETCH_HEAD at this point). This
amounts to claiming that all work in the index was done vs.
an empty tree, and thus all content of the index is
precious.
Note that this use of read-tree just gives us protection
against overwriting index and working tree changes. It will
not actually result in a 3-way merge conflict in the index.
This is fine, as this is a rare situation, and the conflict
would not be interesting anyway (it must, by definition, be
an add/add conflict with the whole content conflicting). And
it makes it simpler for the user to recover, as they have no
HEAD to "git reset" back to.
Reported-by: Stefan Schüßler <mail@stefanschuessler.de>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodules with names using UTF-8 need core.precomposeunicode true
under Mac OS X, set it in the test case.
Improve the portability:
- Not all shells on all OS may understand literal UTF-8 strings.
- Use a help variable filled by printf, as we do it in e.g. t0050.
"strange names" can be called UTF-8, rephrase the heading.
While at it, unbreak &&-chain in the test, and use test_config.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sender is now sanitized, but we didn't sanitize author when checking
whether From: line is needed in the message body.
As a result git started writing duplicate From: lines when author
matched sender and has utf8 characters.
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that author name is not duplicated if it matches sender, even
if it is in utf8 (the test expects a failure that will be fixed in
the next patch).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line
test_config push.default upstream
appears unnecessarily in two tests, as the final test_push_failure sets
push.default before pushing anyway.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of the patch is to introduce the GNU diff
-B/--ignore-blank-lines as closely as possible. The short option is not
available because it's already used for "break-rewrites".
When this option is used, git-diff will not create hunks that simply
add or remove empty lines, but will still show empty lines
addition/suppression if they are close enough to "valuable" changes.
There are two differences between this option and GNU diff -B option:
- GNU diff doesn't have "--inter-hunk-context", so this must be handled
- The following sequence looks like a bug (context is displayed twice):
$ seq 5 >file1
$ cat <<EOF >file2
change
1
2
3
4
5
change
EOF
$ diff -u -B file1 file2
--- file1 2013-06-08 22:13:04.471517834 +0200
+++ file2 2013-06-08 22:13:23.275517855 +0200
@@ -1,5 +1,7 @@
+change
1
2
+
3
4
5
@@ -3,3 +5,4 @@
3
4
5
+change
So here is a more thorough description of the option:
- real changes are interesting
- blank lines that are close enough (less than context size) to
interesting changes are considered interesting (recursive definition)
- "context" lines are used around each hunk of interesting changes
- If two hunks are separated by less than "inter-hunk-context", they
will be merged into one.
The implementation does the "interesting changes selection" in a single
pass.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves
* the early setup part from test_skip to a new function test_start_
* the final common parts of test_expect_* to a new function
test_finish_
to make the next commit more obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's already used twice, and we will have more of the same kind of
matching in a minute.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit fa83a33b, the 'git checkout' DWIMery would create a
new local branch if the specified branch name did not exist and it
matched exactly one ref in the "remotes" namespace. It searched
the "remotes" namespace for matching refs using a simple comparison
of the trailing portion of the remote ref names. This approach
could sometimes produce false positives or negatives.
Since fa83a33b, the DWIMery more strictly excludes the remote name
from the ref comparison by iterating through the remotes that are
configured in the .gitconfig file. This has the side-effect that
any refs that exist in the "remotes" namespace, but do not match
the destination side of any remote refspec, will not be used by
the DWIMery.
This change in behavior breaks the tests in t9802 which relied on
the old behavior of searching all refs in the remotes namespace,
since the git-p4 script does not configure any remotes in the
.gitconfig. Let's work around this in these tests by explicitly
naming the upstream branch to base the new local branch on when
calling 'git checkout'.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced tests used uppercase letters to denote
cherry-picks of commits having the corresponding lowercase letter names.
The helper functions also set up tags with the names of the commits.
But this constellation fails on case-insensitive file systems because
there cannot be distinct tags with names that differ only in case.
Use a less subtle convention for the names of cherry-picked commits.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new rev-parse --prefix option to process all paths given to the
submodule command, dropping the requirement that it be run from the
top-level of the repository.
Since the interpretation of a relative submodule URL depends on whether
or not "remote.origin.url" is configured, explicitly block relative URLs
in "git submodule add" when not at the top level of the working tree.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes 'git rev-parse' behave as if it were invoked from the
specified subdirectory of a repository, with the difference that any
file paths which it prints are prefixed with the full path from the top
of the working tree.
This is useful for shell scripts where we may want to cd to the top of
the working tree but need to handle relative paths given by the user on
the command line.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the indentation to use tabs consistently and start content on the
line after the paren opening a subshell.
Also don't put a space in ">file" and remove ":" from ": >file" to be
consistent with the majority of tests elsewhere.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1b3185f (MALLOC_CHECK: various clean-ups, 2012-09-14) moved around the
MALLOC_CHECK_ and MALLOC_PERTURB_ assignments, intending to limit
their effect to only the test runs. However, they were actually
enabled only during test cleanup. Call setup/teardown_malloc_check
also around the evaluation of the actual test snippet.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick is in progress, 'git status' gives the advice to
run "git commit" to finish the cherry-pick.
However, this won't continue the sequencer, when picking a range of
commits.
Advise users to run "git cherry-pick --continue/--abort"; they work
when picking a single commit as well.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'make test' from a path such as
.../daily-build/master@bdff0e3a374617dce784f801b97500d9ba2e4705, the
logic in fuzz.sed as generated by t5105-request-pull.sh was backwards,
replacing object names before replacing urls, making the test fail.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
save_stash() contains the logic for doing two potentially independent
operations; the first is preparing the stash merge commit, and the
second is updating the stash ref/ reflog accordingly. While the first
operation is abstracted out into a create_stash() for callers to access
via 'git stash create', the second one is not. Fix this by factoring
out the logic for storing the stash into a store_stash() that callers
can access via 'git stash store'.
Like create, store is not intended for end user interactive use, but for
callers in other scripts. We can simplify the logic in the
rebase.autostash feature using this new subcommand.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_REFLOG_ACTION is an environment variable specifying the reflog
message to write after an action is completed. Several other commands
including merge, reset, and commit respect it.
Fix the failing tests in t/checkout-last by making checkout respect it
too. You can now expect
$ git checkout -
to work as expected after any operation that internally uses "checkout"
as its implementation detail, e.g. "rebase".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b397ea4 (status: show more info than "currently not on any branch",
2013-03-13) attempted to make the output of 'git status' richer in
the case of a detached HEAD. Before this patch, with a detached
HEAD, we saw:
$ git status
# Not currently on any branch.
But after the patch, we see:
$ git checkout v1.8.2
$ git status
# HEAD detached at v1.8.2.
It works by digging the reflog for the most recent message of the
form "checkout: moving from xxxx to yyyy". It then asserts that
HEAD and "yyyy" are the same, and displays this message. When they
aren't equal, it displays:
$ git status
# HEAD detached from fe11db.
so that the user can see where the HEAD was first detached.
In case of a rebase [-i] operation in progress, this message depends
on the implementation of rebase writing "checkout: " messages to the
reflog, but that is an implementation detail of "rebase". To remove
this dependency so that rebase can be updated to write better reflog
messages, replace this "HEAD detached from" message with:
# rebase in progress; onto $ONTO
Changes to the commit object name in the expected output for some of
the tests shows that what the test expected "status" to show during
"rebase -i" was not consistent with the output during a vanilla
"rebase", which showed on top of what commit the series is being
replayed. Now we consistently expect something meaningful to the
end user.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$ git checkout -
does not work as expected after a rebase. This is because the
reflog records "checkout" made by "rebase" as its implementation
detail the same way as end-user initiated "checkout", and makes it
count as the branch that was previously checked out.
Add four failing tests documenting this bug: two for a normal rebase,
and another two for an interactive rebase.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b397ea4863 (status: show more info than "currently not on any
branch", 2013-03-13) wanted to make sure that after a checkout to
detach HEAD, the user can see where the HEAD was originally detached
from. The last test added by that commit to t7512 shows one
example, immediately after HEAD is detached. Enhance that test to
show "detached HEAD from" form that should be shown when the user
further resetted to another commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace instances of ! test -d with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following bug has been observed:
$ git am # no input file
^C
$ git am --abort
Resolve operation not in progress, we are not resuming.
This happens because the following test fails:
test -d "$dotest" && test -f "$dotest/last" && test -f "$dotest/next"
and the codepath for an "am in-progress" is not executed. It falls back
to the codepath that treats this as a "fresh execution". Before
rr/rebase-autostash, this condition was
test -d "$dotest"
It would incorrectly execute the "normal" am --abort codepath:
git read-tree --reset -u HEAD ORIG_HEAD
git reset ORIG_HEAD
by incorrectly assuming that an am is "in progress" (i.e. ORIG_HEAD
etc. was written during the previous execution).
Notice that
$ git am
^C
executes nothing of significance, is equivalent to
$ mkdir .git/rebase-apply
Therefore, the correct solution is to treat .git/rebase-apply as a
"stray directory" and remove it on --abort in the fresh-execution
codepath. Also ensure that we're not called with --rebasing from
git-rebase--am.sh; in that case, it is the responsibility of the caller
to handle and stray directories.
While at it, tell the user to run "git am --abort" to get rid of the
stray $dotest directory, if she attempts anything else.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to load an object from disk and fail, our
general strategy is to see if we can get it from somewhere
else (e.g., a loose object). That lets users fix corruption
problems by copying known-good versions of objects into the
object database.
We already handle the case where we were not able to read
the delta from disk. However, when we find that the delta we
read does not apply, we simply die. This case is harder to
trigger, as corruption in the delta data itself would
trigger a crc error from zlib. However, a corruption that
pointed us at the wrong delta base might cause it.
We can do the same "fail and try to find the object
elsewhere" trick instead of dying. This not only gives us a
chance to recover, but also puts us on code paths that will
alert the user to the problem (with the current message,
they do not even know which sha1 caused the problem).
Note that unlike some other pack corruptions, we do not
recover automatically from this case when doing a repack.
There is nothing apparently wrong with the delta, as it
points to a valid, accessible object, and we realize the
error only when the resulting size does not match up. And in
theory, one could even have a case where the corrupted size
is the same, and the problem would only be noticed by
recomputing the sha1.
We can get around this by recomputing the deltas with
--no-reuse-delta, which our test does (and this is probably
good advice for anyone recovering from pack corruption).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test corrupts pack objects by using "dd" with a seek
command. It passes "count=1 bs=1" to munge just a single
byte. However, the test added in commit b3118bdc wants to
munge two bytes, and the second byte of corruption is
silently ignored.
This turned out not to impact the test, however. The idea
was to reduce the "size of this entry" part of the header so
that zlib runs out of input bytes while inflating the entry.
That header is two bytes long, and the test reduced the
value of both bytes; since we experience the problem if we
are off by even 1 byte, it is sufficient to munge only the
first one.
Even though the test would have worked with only a single
byte munged, and we could simply tweak the test to use a
single byte, it makes sense to lift this 1-byte restriction
from do_corrupt_object. It will allow future tests that do
need to change multiple bytes to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Versions of Apache before 2.4 always had a "MultiProcessing
Module" (MPM) statically built in, which manages the worker
threads/processes. We do not care which one, as it is
largely a performance issue, and we put only a light load on
the server during our testing.
As of Apache 2.4, the MPM module is loadable just like any
other module, but exactly one such module must be loaded. On
a system where the MPMs are compiled dynamically (e.g.,
Debian unstable), this means that our test Apache server
will not start unless we provide the appropriate
configuration.
Unfortunately, we do not actually know which MPM modules are
available or appropriate for the system on which the tests
are running. This patch picks the "prefork" module, as it
is likely to be available on all Unix-like systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In apache 2.4, the "Order" directive has gone away in favor
of a new system in mod_authz_host. However, since we want
our config file to remain compatible across multiple Apache
versions, we can use mod_access_compat to keep using the
older style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In apache 2.4, the "Auth*" and "Require" directives have
moved into the authn_core and authz_core modules,
respectively.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The LockFile directive from earlier versions of apache has
been replaced by the Mutex directive. The latter seems to
give sane defaults and does not need any specific
customization, so we can get away with just adding a version
check to the use of LockFile.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revisions specified on the command-line as <onto> and <upstream>
arguments could be of the form :/quuxery; so, use peel_committish() to
resolve them. The failing tests in t/rebase and t/rebase-interactive
now pass.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following commands fail, even if :/quuxery and :/foomery resolve to
perfectly valid commits:
$ git rebase [-i] --onto :/quuxery :/foomery
This is because rebase [-i] attempts to rev-parse ${REV}^0 to verify
that the given revision resolves to a commit. Add tests to document
these failures.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic git-send-email used to suppress cc mishandled names like "A
U. Thor" <author@example.xz>, where the human readable part needs
to be quoted (the user input may not have the double quotes around
the name, and comparison was done between quoted and unquoted
strings).
* mt/send-email-cc-match-fix:
test-send-email: test for pre-sanitized self name
t/send-email: test suppress-cc=self with non-ascii
t/send-email: add test with quoted sender
send-email: make --suppress-cc=self sanitize input
t/send-email: test suppress-cc=self on cccmd
send-email: fix suppress-cc=self on cccmd
t/send-email.sh: add test for suppress-cc=self
Major update to the revision traversal logic to improve culling of
irrelevant parents while traversing a mergy history.
* kb/full-history-compute-treesame-carefully-2:
revision.c: make default history consider bottom commits
revision.c: don't show all merges for --parents
revision.c: discount side branches when computing TREESAME
revision.c: add BOTTOM flag for commits
simplify-merges: drop merge from irrelevant side branch
simplify-merges: never remove all TREESAME parents
t6012: update test for tweaked full-history traversal
revision.c: Make --full-history consider more merges
Documentation: avoid "uninteresting"
rev-list-options.txt: correct TREESAME for P
t6111: add parents to tests
t6111: allow checking the parents as well
t6111: new TREESAME test set
t6019: test file dropped in -s ours merge
decorate.c: compact table when growing
Many "git submodule" operations do not work on a submodule at a path whose
name is not in ASCII.
This is because "git ls-files" is used to find which paths are bound to
submodules to the current working tree, and the output is C-quoted by default
for non ASCII pathnames.
Tell "git ls-files" to not C-quote its output, which is easier than unwrapping
C-quote ourselves.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the following case
$ git rebase master
Current branch autostash-fix is up to date.
the autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the following case
$ git rebase master
Fast-forwarded autostash-fix to master.
The autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.rmHints to choose whether to display advice or not
when git rm fails. Defaults to true, in order to preserve current behavior.
As an example, the message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would look like, with advice.rmHints=false:
error: 'foo.txt' has changes staged in the index
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git rm' fails, it now displays a single message
with the list of files involved, instead of displaying
a list of messages with one file each.
As an example, the old message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
error: 'bar.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would now be displayed as:
error: the following files have changes staged in the index:
foo.txt
bar.txt
(use --cached to keep the file, or -f to force removal)
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we used a singly linked list of commits to hold a set
of in-flight commits while traversing history. The most typical use
of the list is to add commits that are newly discovered to it, keep
the list sorted by commit timestamp, pick up the newest one from the
list, and keep digging. The cost of keeping the singly linked list
sorted is nontrivial, and this typical use pattern better matches a
priority queue.
Introduce a prio-queue structure, that can be used either as a LIFO
stack, or a priority queue. This will be used in the next patch to
hold in-flight commits during sort-in-topological-order.
Tests and the idea to make it usable for any "void *" pointers to
"things" are by Jeff King. Bugs are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the SANITY prerequisite when testing if a temp file can
be created in a read only directory.
Skip the test under CYGWIN, or skip it under Unix/Linux when
it is run as root.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/rebase-autostash:
rebase: implement --[no-]autostash and rebase.autostash
rebase --merge: return control to caller, for housekeeping
rebase -i: return control to caller, for housekeeping
am: return control to caller, for housekeeping
rebase: prepare to do generic housekeeping
rebase -i: don't error out if $state_dir already exists
am: tighten a conditional that checks for $dotest
"git cmd <name>", when <name> happens to be a 40-hex string,
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
like we warn when more than one refs/ hierachies share the same
name.
* nd/warn-ambiguous-object-name:
get_sha1: warn about full or short object names that look like refs
When a reflog notation is used for implicit "current branch", we
did not say which branch and worse said "branch ''".
* rr/die-on-missing-upstream:
sha1_name: fix error message for @{<N>}, @{<date>}
sha1_name: fix error message for @{u}
Fix recent regression of .gitignore files that list !directory to
mark it not-ignored.
* kb/status-ignored-optim-2:
dir.c: fix ignore processing within not-ignored directories
Add the helper test-read-cache, which can be used to call read_cache and
discard_cache in a loop as well as a performance check based on it.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are quite a lot places where an output file is expected to be
empty, and we fail the test when it is not. The output from running
the test script with -i -v can be helped if we showed the unexpected
contents at that point.
We could of course do
>expected.empty && test_cmp expected.empty actual
but this is commmon enough to be done with a dedicated helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The part of the test that is about symbolic links in the index does not
require that the corresponding file system entry is actually a symbolic
link. Use test_ln_s_add to insert a symbolic link in the index. When
the file system does not support symbolic links, we actually have a
regular file in the worktree, which we can update as if it were a
symbolic link. diff-index picks up the symbolic link property from the
index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All tests in t6035 are protected by SYMLINKS. But that is not necessary,
because a lot of the functionality can be tested provided symbolic link
entries enter the index and object data base. Use test_ln_s_add for this
purpose.
Some test cases do test the presence of symbolic links on the file system.
Move these tests into separate test cases that remain protected by
SYMLINKS.
There is one instance of expect_failure. There is a possibility that this
test case fails differently depending on whether SYMLINKS is present or
not; but this is not the case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t4023 and t4114, we have to remove the entries using 'git rm' because
otherwise the entries that must turn from symbolic links to regular files
would stay symbolic links in the index. For the same reason, we have to
use 'git mv' instead of plain 'mv' in t3509.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This undoes the special casing introduced in this test by 704a3143
(Use prerequisite tags to skip tests that depend on symbolic links,
2009-03-04).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test cases include many corner-cases of merge-recursive's behavior,
some of them involve type changes and symbolic links. All cases, including
those that are protected by SYMLINKS check only whether the result of
merge-recursive is correctly stored in the database and the index; the
file system is not investigated. Use test_ln_s_add to enter a symbolic
link in the index in the test setup and run the tests without the
SYMLINKS prerequisite.
Notice that one test that has the SYMLINKS protection removed is an
expect_failure. There is a possibility that the test fails differently
depending on whether SYMLINKS is present or not; but this is not the case
presently.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000-basic hard-codes many object IDs. To cater to file systems that do
not support symbolic links, different IDs are used depending on the
SYMLINKS prerequisite. But we can observe the symbolic links are only
needed to generate index entries. Use test_ln_s_add to generate the
index entries and get rid of explicit SYMLINKS checks.
This undoes the special casing introduced in this test by 704a3143
(Use prerequisite tags to skip tests that depend on symbolic links,
2009-03-04).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function that creates a symbolic link and adds it to the index
to be used in cases where a symbolic link is not required on the file
system. We will use it to remove many SYMLINKS prerequisites from test
cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular:
- move test preparations inside test_expect_success
- place test description on the test_expect_success line
- indent with a tab
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3406 is supposed to test "messages from rebase operation", so let's
move tests in t3400 that fit that description into 3406. Most of the
functionality they tested, except for the messages, has now been
subsumed by t3420.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the following:
- Quote 'setup'
- Remove blank lines within test case body
- Use test_commit instead of custom quick_one
- Create branch "topic" from tag created by test_commit
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
