This use of strbuf_grow() is a historical artifact that was once used to
ensure that strbuf.buf was allocated and properly nul-terminated. This
was added before the introduction of the slopbuf in b315c5c0, which
guarantees that strbuf.buf always points to a usable nul-terminated string.
So let's remove it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
* jc/diff-index-unpack:
diff-index: pass pathspec down to unpack-trees machinery
unpack-trees: allow pruning with pathspec
traverse_trees(): allow pruning with pathspec
* mm/rebase-i-exec-edit:
rebase -i: notice and warn if "exec $cmd" modifies the index or the working tree
rebase -i: clean error message for --continue after failed exec
For some reason $LOGNAME is not set anymore for me after an upgrade from
Ubuntu 11.04 to 11.10. Use $USER in such a case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous logic in show_config was to print the delimiter when the
value was set, but Boolean variables have an implicit value "true" when
they appear with no value in the config file. As a result, we got:
git_Config --get-regexp '.*\.Boolean' #1. Ok: example.boolean
git_Config --bool --get-regexp '.*\.Boolean' #2. NO: example.booleantrue
Fix this by defering the display of the separator until after the value
to display has been computed.
Reported-by: Brian Foster <brian.foster@maxim-ic.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking expr to compare two numbers, don't quote the
variables which are the output of 'wc -c'. On OS X, this output
includes spaces, which expr balks at:
$ sz0=`wc -c </etc/passwd`
$ sz1=`wc -c </etc/passwd`
$ echo "'$sz0'"
' 3667'
$ expr "$sz0" \< "$sz1" \* 2
expr: non-numeric argument
$ expr $sz0 \< $sz1 \* 2
1
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make ERR as first packet of remote snapshot reply work like it does in
fetch/push. Lets servers decline remote snapshot with message the same
way as declining fetch/push with a message.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The g+s bit on directories to make group ownership inherited is a
SysVism --- BSD and most of its descendants do not need it since they
do the sane thing by default without g+s. In fact, on some
filesystems (but not all --- tmpfs works this way but UFS does not),
the kernel of FreeBSD does not even allow non-root users to set setgid
bit on directories and produces errors when one tries:
$ git init --shared dir
fatal: Could not make /tmp/dir/.git/refs writable by group
Since the setgid bit would only mean "do what you were going to do
already", it's better to avoid setting it. Accordingly, ever since
v1.5.5-rc0~59^2 (Do not use GUID on dir in git init --share=all on
FreeBSD, 2008-03-05), git on true FreeBSD has done exactly that. Set
DIR_HAS_BSD_GROUP_SEMANTICS in the makefile for GNU/kFreeBSD, too, so
machines that use glibc with the kernel of FreeBSD get the same fix.
This fixes t0001-init.sh and t1301-shared-repo.sh on GNU/kFreeBSD
when running tests with --root pointing to a directory that uses
tmpfs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02)
unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff
invocation to help performance on pathological cases, while hinting that a
follow-up patch could reintroduce it with "--minimal" option from the
command line.
Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking paths out of a tree is (currently) defined to do:
- Grab the paths from the named tree that match the given pathspec,
and add them to the index;
- Check out the contents from the index for paths that match the
pathspec to the working tree; and while at it
- If the given pathspec did not match anything, suspect a typo from the
command line and error out without updating the index nor the working
tree.
Suppose that the branch you are working on has dir/myfile, and the "other"
branch has dir/other but not dir/myfile. Further imagine that you have
either modified or removed dir/myfile in your working tree, but you have
not run "git add dir/myfile" or "git rm dir/myfile" to tell Git about your
local change. Running
$ git checkout other dir
would add dir/other to the index with the contents taken out of the
"other" branch, and check out the paths from the index that match the
pathspec "dir", namely, "dir/other" and "dir/myfile", overwriting your
local changes to "dir/myfile", even though "other" branch does not even
know about that file.
Fix it by updating the working tree only with the index entries that
was read from the "other" tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the sample post-commit and post-receive hooks. The sample
post-commit doesn't contain any sample functionality and the comments do
not provide more information than already found in the documentation.
The sample post-receive hooks doesn't provide any sample functionality
either and refers in the comments to a contrib hook that might be
installed in different locations on different systems, which isn't that
helpful.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
27af01d (xdiff/xprepare: improve O(n*m) performance in
xdl_cleanup_records(), 2011-08-17) was supposed to be a performance
boost only. However, it unexpectedly changed the behaviour of diff.
Revert a part of 27af01d that removes logic that mark lines as
"multi-match" (ie. dis[i] == 2). This was preventing the multi-match
discard heuristic (performed in xdl_cleanup_records() and
xdl_clean_mmatch()) from executing.
Reported-by: Alexander Pepper <pepper@inf.fu-berlin.de>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix another instance of a recursive merge incorrectly paying attention to
the working tree file during a virtual ancestor merge, that resulted in
spurious and useless "addinfo_cache failed" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_one_patchid() uses a rather dumb heuristic to determine if the
passed buffer is part of the next commit. Whenever the first 40 bytes
are a valid hexadecimal sha1 representation, get_one_patchid() returns
next_sha1.
Once the current line is longer than the fixed buffer, this will break
(provided the additional bytes make a valid hexadecimal sha1). As a result
patch-id returns incorrect results. Instead, use strbuf and read one line
at a time.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly fixed already by 6b44577 (mergetool: check return value
from read, 2011-07-01). Catch two uses it missed.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The threading tests turn on format.thread, but never clean
up after themselves, meaning that later tests will also have
format.thread set.
This is more annoying than most leftover config, too,
because not only does it impact the results of other tests,
but it does so non-deterministically. Threading requires the
generation of message-ids, which incorporate the current
time, meaning a slow-running test script may generate
different results from run to run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the usual "git" transport, a large-ish transfer with "git fetch" and
"git pull" give progress eye-candy to avoid boring users. However, not
when they are reading from a bundle. I.e.
$ git pull ../git-bundle.bndl master
This teaches bundle.c:unbundle() to give "-v" option to index-pack and
tell it to give progress bar when transport decides it is necessary.
The operation in the other direction, "git bundle create", could also
learn to honor --quiet but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
