* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
If the commit specified as the bottom of the commit range has a direct
parent that has another child commit that contributed to the resulting
history, "rev-list --ancestry-path" was confused and listed that side
history as well, due to the command line parser subtlety corrected by the
previous commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a complex set of revision specifiers on the command line, it is too
late to look at the flags of the objects in the initial traversal list at
the beginning of limit_list() in order to determine what the objects the
end-user explicitly listed on the command line were. The process to move
objects from the pending array to the traversal list may have marked
objects that are not mentioned as UNINTERESTING, when handle_commit()
marked the parents of UNINTERESTING commits mentioned on the command line
by calling mark_parents_uninteresting().
This made "rev-list --ancestry-path ^A ..." to mistakenly list commits
that are descendants of A's parents but that are not descendants of A
itself, as ^A from the command line causes A and its parents marked as
UNINTERESTING before coming to limit_list(), and we try to enumerate the
commits that are descendants of these commits that are UNINTERESTING
before we start walking the history.
It actually is too late even if we inspected the pending object array
before calling prepare_revision_walk(), as some of the same objects might
have been mentioned twice, once as positive and another time as negative.
The "rev-list --some-option A --not --all" command may want to notice,
even if the resulting set is empty, that the user showed some interest in
"A" and do something special about it.
Prepare a separate array to keep track of what syntactic element was used
to cause each object to appear in the pending array from the command line,
and populate it as setup_revisions() parses the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add log.abbrevCommit config variable as a convenience for users who
often use --abbrev-commit with git log and friends. Allow the option
to be overridden with --no-abbrev-commit. Per 635530a2fc and 4f62c2bc57,
the config variable is ignored when log is given "--pretty=raw".
(Also, a drive-by spelling correction in git log's short help.)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/setup-revisions-glob-and-friends-passthru:
revisions: allow --glob and friends in parse_options-enabled commands
revisions: split out handle_revision_pseudo_opt function
Update the fix for 1.7.5 maintenance track.
* jc/maint-1.7.4-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
If we later add a command in the log family that by default limit
its operation to the current subdirectory, we would need to resurrect
the "a lone ':' on the command line means no pathspec whatsoever".
Now the codepath was cleaned up, we can do so in one place. Leave a
note to mark where it is for later generations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the fix for 1.7.4 maintenance track.
* jc/maint-1.6.6-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
When the command line has "--" disambiguator, we take the remainder of
argv[] as "prune_data", but when --stdin is given at the same time,
we need to append to the existing prune_data and end up attempting to
realloc(3) it. That would not work.
Fix it by consistently using append_prune_data() throughout the input
processing. Also avoid counting the number of existing paths in the
function over and over again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.6.0-rc2~42 (2008-07-31) explains, even pseudo-options like --not
and --glob that need to be parsed in order with revisions should be
marked handled by handle_revision_opt to avoid an error when
parse_revision_opt callers like "git shortlog" encounter them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.6.0-rc2~42 (Allow "non-option" revision options in
parse_option-enabled commands, 2008-07-31) explains, options handled
by setup_revisions fall into two categories:
1. global options like --topo-order handled by parse_revision_opt,
which can take detached arguments and can be parsed in advance;
2. pseudo-options that must be parsed in order with their revision
counterparts, like --not and --all.
The global options are taken care of by handle_revision_opt; the
pseudo-options are currently in a deeply indented portion of
setup_revisions. Give them their own function for easier reading.
The only goal is to make setup_revisions easier to read straight
through. No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With most command line options, later instances of an option
override earlier ones. With cumulative options like
"--notes", however, there is no way to say "forget the
--notes I gave you before".
Let's have --no-notes trigger this forgetting, so that:
git log --notes=foo --no-notes --notes=bar
will show only the "bar" notes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have --show-notes, but it has a few shortcomings:
1. Using --show-notes=<ref> implies that we should also
show the default notes. Which means you also need to
use --no-standard-notes if you want to suppress them.
2. It is negated by --no-notes, which doesn't match.
3. It's too long to type. :)
This patch introduces --notes, which behaves exactly like
--show-notes, except that using "--notes=<ref>" does not
imply showing the default notes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for more notes-related revision
command-line options.
The "suppress_default_notes" option is renamed to
"use_default_notes", and is now a tri-state with values less
than one indicating "not set". If the value is "not set",
then we show default refs if and only if no other refs were
given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to use an extra pointer, which just ends up
leaking memory. The fact that the list is empty tells us the
same thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to do it ourselves when there is a library function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the porcelain level, because by definition there are many more contributors
than integrators, it makes sense to give a handy short-hand for --right-only
used with --cherry-mark and --no-merges. Make it so.
In other words, this provides "git cherry with rev-list interface".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for marking those commits which "--cherry-pick" would drop.
The marker for those commits is '=' because '-' denotes a boundary
commit already, even though 'git cherry' uses it.
Nonequivalent commits are denoted '+' unless '--left-right' is used.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "--cherry-pick" does not work with unsymmetric ranges
(A..B) for obvious reasons.
Introduce "--left-only" and "--right-only" which limit the output to
commits on the respective sides of a symmetric range (i.e. only "<"
resp. ">" commits as per "--left-right").
This is especially useful for things like
git log --cherry-pick --right-only @{u}...
which is much more flexible (and descriptive) than
git cherry @{u} | sed -ne 's/^+ //p'
and potentially more useful than
git log --cherry-pick @{u}...
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
By passing the path to a submodule in opt->submodule, the function can
be used to walk history in the named submodule repository, instead of
the toplevel repository.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --ancestry-path together with history simplification (typically
triggered by path limiting), history simplification would get in the way of
--ancestry-path by prematurely removing the parent links between commits on
which the ancestry path calculations are made.
This patch disables this history simplification when --ancestry-path is
enabled. This is similar to what e.g. --full-history already does.
The patch also includes a simple testcase verifying that --ancestry-path
works together with path limiting.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
