Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
In modern tests, we typically put output into a file and
compare it with test_cmp. This is nicer than just comparing
via "test", and much shorter than comparing via "test" and
printing a custom message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When coalescing ranges, sort_and_merge_range_set() unconditionally
assumes that the end of a range being folded into a preceding range
should become the end of the coalesced range. This assumption, however,
is invalid when one range is a subset of another. For example, given
ranges 1-5 and 2-3 added via range_set_append_unsafe(),
sort_and_merge_range_set() incorrectly coalesces them to range 1-3
rather than the correct union range 1-5. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4211 attempts to test multiple git-log -L ranges where one range is a
superset of the other, and falsely succeeds because its "expected"
output is incorrect.
Overlapping -L ranges handed to git-log are coalesced by
line-log.c:sort_and_merge_range_set() into a set of non-overlapping,
disjoint ranges. When one range is a subset of another,
sort_and_merge_range_set() should coalesce both ranges to the superset
range, but instead the coalesced range often is incorrectly truncated to
the end of the subset range. For example, ranges 2-8 and 3-4 are
coalesced incorrectly to 2-4.
One can observe this incorrect behavior with git-log -L using the test
repository created by t4211. The superset/subset ranges t4211 employs
are 4-$ and 8-12 (where $ represents end-of-file). The coalesced range
should be 4-$. Manually invoking git-log with the same ranges the test
employs, we see:
% git log -L 4:a.c simple |
awk '/^commit [0-9a-f]{40}/ { print substr($2,1,7) }'
4659538
100b61a
39b6eb2
a6eb826
f04fb20
de4c48a
% git log -L 8,12:a.c simple | awk ...
f04fb20
de4c48a
% git log -L 4:a.c -L 8,12:a.c simple | awk ...
a6eb826
f04fb20
de4c48a
This last output is incorrect. 8-12 is a subset of 4-$, hence the output
of the coalesced range should be the same as the 4-$ output shown first.
In fact, the above incorrect output is the truncated bogus range 4-12:
% git log -L 4,12:a.c simple | awk ...
a6eb826
f04fb20
de4c48a
Fix the test to correctly fail in the presence of the
sort_and_merge_range_set() coalescing bug. Do so by changing the
"expected" output to the commits mentioned in the 4-$ output above.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode clause D14 defines all characters U+nFFFE and U+nFFFF (where
0 <= n <= 10h) as well as the range U+FDD0..U+FDEF as non-characters,
reserved for internal use only. Disallow these characters in commit
messages as they are normally not recommended for interchange.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells do not understand the one-line construct, and instead need
FOO=bar &&
export FOO
Detect this in the test-lint target.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The == operator as an alias to = is not POSIX. This doesn't actually
matter for the execution of the script, because it only runs when the
shell is bash. However, it trips up test-lint, so it's nicer to use
the standard form.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, bin-wrappers overwrites GITPERLLIB. If we want to chain to
those scripts and define GITPERLLIB before, our changes will be
discarded.
This patch makes the bin-wrappers prepend their modifications to
GITPERLLIB rather than redefining it. It also unset GITPERLLIB in the
test-suite to prevent broken $GITPERLLIB in the user's configuration
from interfering with the testsuite.
The codes using GIT_TEMPLATE_DIR and GIT_TEXTDOMAINDIR handle only one
path in each of this variable so this new behavior would be useless on
those variables.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0433ad1 (clone: run check_everything_connected,
2013-03-25) added the same connectivity check to clone that
we use for fetching. The intent was to provide enough safety
checks that "git clone git://..." could be counted on to
detect bit errors and other repo corruption, and not
silently propagate them to the clone.
For local clones, this turns out to be a bad idea, for two
reasons:
1. Local clones use hard linking (or even shared object
stores), and so complete far more quickly. The time
spent on the connectivity check is therefore
proportionally much more painful.
2. Local clones do not actually meet our safety guarantee
anyway. The connectivity check makes sure we have all
of the objects we claim to, but it does not check for
bit errors. We will notice bit errors in commits and
trees, but we do not load blob objects at all. Whereas
over the pack transport, we actually recompute the sha1
of each object in the incoming packfile; bit errors
change the sha1 of the object, which is then caught by
the connectivity check.
This patch drops the connectivity check in the local case.
Note that we have to revert the changes from 0433ad1 to
t5710, as we no longer notice the corruption during clone.
We could go a step further and provide a "verify even local
clones" option, but it is probably not worthwhile. You can
already spell that as "cd foo.git && git fsck && git clone ."
or as "git clone --no-local foo.git".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For testing truncated log messages 'commit_msg' function uses `sed` to
cut a message. On various platforms `sed` behaves differently and
results of its work depend on locales installed. So, avoid using `sed`.
Use predefined expected outputs instead of calculated ones.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In de6029a (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26) 'complex-subject' test was changed.
Revert it back, because that change actually removed tests for "%b"
and "%s" with i18n.commitEncoding set. Also, add two more tests for
mentioned above "%b" and "%s" to test encoding conversions with no
i18n.commitEncoding set.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function 'test_format' has become harder to read after its change in
de6029a2 (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26). Simplify it by moving its "should we
expect it to fail?" parameter to the end.
Note, current code does not use this last parameter as far as there
are no tests expected to fail. We can keep that for future use.
Also, reformat comments.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Improved-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previuos commit de6029a (pretty: Add failing tests: --format output
should honor logOutputEncoding, 2013-06-26) single quotes were replaced
with double quotes to make "$(commit_msg)" expression in heredoc to
work. The same effect can be achieved by using "EOF" as a heredoc
delimiter instead of "\EOF".
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
Do not use FIFOs on cygwin, they do not work. Cygwin includes
coreutils, so has mkfifo, and that command does something. However,
the resultant named pipe is known (on the Cygwin mailing list at
least) to not work correctly.
This disables PIPE for Cygwin, allowing t0008.sh to complete (all other
tests in that file work correctly).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both "iso8859-1" and "iso-8859-1" are understood as latin-1 by
modern platforms, but the latter is not understood by older
platforms;update tests to use the former.
This is in line with 3994e8a9 (t4201: use ISO8859-1 rather than
ISO-8859-1, 2009-12-03), which did the same.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code accepts pseudo-UTF-8 sequences that encode a character with more
bytes than necessary. Reject such sequences, since they are not valid UTF-8.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit code already contains code for validating UTF-8, but it does not
check for invalid values, such as guaranteed non-characters and surrogates. Fix
this by explicitly checking for and rejecting such characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/empty-archive:
t5004: resurrect original empty tar archive test
t5004: avoid using tar for checking emptiness of archive
Conflicts:
t/t5004-archive-corner-cases.sh
"git log -c --follow $path" segfaulted upon hitting the commit that
renamed the $path being followed.
* cb/log-follow-with-combined:
fix segfault with git log -c --follow
When a reflog notation is used for implicit "current branch", we did
not say which branch, and worse said "branch ''".
* rr/die-on-missing-upstream:
sha1_name: fix error message for @{<N>}, @{<date>}
sha1_name: fix error message for @{u}
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --depth option to the add and update commands of "git submodule",
which is then passed on to the clone command. This is useful when the
submodule(s) are huge and you're not really interested in anything but
the latest commit.
Tests are added and some indention adjustments were made to conform to the
rest of the testfile on "submodule update can handle symbolic links in pwd".
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can set submodule.$name.update to '!command' which will cause
'command' to be run instead of checkout/merge/rebase. This allows
the user finer-grained control over how the update is done.
The primary motivation for this was interoperability with stgit;
however being able to intercept the submodule update process may
prove useful for integrating with or extending other tools.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge strategy and its options can be specified in `git rebase`,
but with `--interactive`, they were completely ignored.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earliest iteration of this test script used a magic string
110282 as the common prefix for ambiguous object names, but the
final edition switched the common prefix to 0000000000 (10 "0"s).
Unfortunately, instances of the original prefix were left in the
comments and a few tests. Replace them with the correct constants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"stash save" is about saving the local change to the working tree,
but also about restoring the state of the last commit to the working
tree. When a local change is to turn a non-directory to a directory,
in order to restore the non-directory, everything in the directory
needs to be removed.
Which is fine when running "git stash save --include-untracked",
but without that option, untracked, newly created files in the
directory will have to be discarded, if the state you are restoring
to has a non-directory at the same path as the directory.
Introduce a safety valve to fail the operation in such case, using
the "ls-files --killed" which was designed for this exact purpose.
The "stash save" is stopped when untracked files need to be
discarded because their leading path ceased to be a directory, and
the user is required to pass --force to really have the data
removed.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the working tree walker encounters a directory, it asks the
function treat_directory() if it should descend into it, show it as
an untracked directory, or do something else. When the directory is
the top of the submodule working tree, we used to say "That is an
untracked directory", which was bogus.
It is an entity that is tracked in the index of the repository we
are looking at, and that is not to be descended into it. Return
path_none, not path_untracked, to report that.
The existing case that path_untracked is returned for a newly
discovered submodule that is not tracked in the index (this only
happens when DIR_NO_GITLINKS option is not used) is unchanged, but
that is exactly because the submodule is not tracked in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original way to specify remote repository using .git/branches/
used to have a nifty feature. The code to support the feature was
still in a function but the caller was changed not to call it 5
years ago, breaking that feature and leaving the supporting code
unreachable.
* rr/remote-branch-config-refresh:
t/t5505-remote: test multiple push/pull in remotes-file
ls-remote doc: don't encourage use of branches-file
ls-remote doc: rewrite <repository> paragraph
ls-remote doc: fix example invocation on git.git
t/t5505-remote: test url-with-# in branches-file
remote: remove dead code in read_branches_file()
t/t5505-remote: use test_path_is_missing
t/t5505-remote: test push-refspec in branches-file
t/t5505-remote: modernize style
Code clean-up for in-prompt status script (in contrib/).
* ed/color-prompt:
git-prompt.sh: add missing information in comments
git-prompt.sh: do not print duplicate clean color code
t9903: remove redundant tests
git-prompt.sh: refactor colored prompt code
t9903: add tests for git-prompt pcmode
Having multiple "fixup!" on a line in the rebase instruction sheet
did not work very well with "git rebase -i --autosquash".
* ap/rebase-multiple-fixups:
lib-rebase: style: use write_script, <<-\EOF
rebase -i: handle fixup! fixup! in --autosquash
* sg/bash-prompt:
bash prompt: mention that PROMPT_COMMAND mode is faster
bash prompt: avoid command substitution when finalizing gitstring
bash prompt: avoid command substitution when checking for untracked files
bash prompt: use bash builtins to check stash state
bash prompt: use bash builtins to check for unborn branch for dirty state
bash prompt: combine 'git rev-parse' for detached head
bash prompt: combine 'git rev-parse' executions in the main code path
bash prompt: use bash builtins to find out current branch
bash prompt: use bash builtins to find out rebase state
bash prompt: run 'git rev-parse --git-dir' directly instead of __gitdir()
bash prompt: return early from __git_ps1() when not in a git repository
bash prompt: print unique detached HEAD abbreviated object name
bash prompt: add a test for symbolic link symbolic refs
completion, bash prompt: move __gitdir() tests to completion test suite
bash prompt: use 'write_script' helper in interactive rebase test
bash prompt: fix redirection coding style in tests
Update documentation to match more recent realities.
* wk/doc-in-linux-3.x-era:
Documentation: Update 'linux-2.6.git' -> 'linux.git'
Documentation: Update the NFS remote examples to use the staging repo
doc/clone: Pick more compelling paths for the --reference example
doc/clone: Remove the '--bare -l -s' example
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
OS X's sed only accepts basic regular expressions, which does not
allow the + quantifier. However '..*' (anything, followed by zero or
more anything) is the same as '.\+' (one or more anything) and valid
in any regular expression language.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.8.3.3
check-ignore doc: fix broken link to ls-files page
test: spell 'ls-files --delete' option correctly in test descriptions
"git diff" learned a mode that ignores hunks whose change consists
only of additions and removals of blank lines, which is the same as
"diff -B" (ignore blank lines) of GNU diff.
* ap/diff-ignore-blank-lines:
diff: add --ignore-blank-lines option
Allow various subcommands of "git submodule" to be run not from the
top of the working tree of the superproject.
* jk/submodule-subdirectory-ok:
submodule: drop the top-level requirement
rev-parse: add --prefix option
submodule: show full path in error message
t7403: add missing && chaining
t7403: modernize style
t7401: make indentation consistent
ae75342 test-lib: rearrange start/end of test_expect_* and test_skip
changed the way tests are started/stopped, but did not update the perf
tests. They were therefore giving the wrong output, because of the
wrong test count. Fix this by starting and stopping the tests
correctly.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning with "git clone --depth N" while fetch.fsckobjects (or
transfer.fsckobjects) is set to true did not tell the cut-off points
of the shallow history to the process that validates the objects and
the history received, causing the validation to fail.
* 'nd/clone-connectivity-shortcut' (early part):
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
* jh/checkout-auto-tracking:
glossary: Update and rephrase the definition of a remote-tracking branch
branch.c: Validate tracking branches with refspecs instead of refs/remotes/*
t9114.2: Don't use --track option against "svn-remote"-tracking branches
t7201.24: Add refspec to keep --track working
t3200.39: tracking setup should fail if there is no matching refspec.
checkout: Use remote refspecs when DWIMming tracking branches
t2024: Show failure to use refspec when DWIMming remote branch names
t2024: Add tests verifying current DWIM behavior of 'git checkout <branch>'
Logic used by git-send-email to suppress cc mishandled names that
need RFC2047 quoting.
* mt/send-email-cc-match-fix:
send-email: sanitize author when writing From line
send-email: add test for duplicate utf8 name
"git pull" into nothing trashed "local changes" that were in the
index, and this avoids it.
* jk/pull-into-dirty-unborn:
pull: merge into unborn by fast-forwarding from empty tree
pull: update unborn branch tip after index
Plug a small leak in checkout.
* bc/checkout-tracking-name-plug-leak:
t/t9802: explicitly name the upstream branch to use as a base
builtin/checkout.c: don't leak memory in check_tracking_name
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first. This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).
In the todo list, the full commit message is preserved, in case it provides
useful cues to the user. A test helper set_cat_todo_editor is introduced to
check this.
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for the codepath to parse patches that add new files, generated
by programs other than Git. THis is an old breakage in v1.7.11 and
will need to be merged down to the maintanance tracks.
* tr/maint-apply-non-git-patch-parsefix:
apply: carefully strdup a possibly-NULL name
Many "git submodule" operations do not work on a submodule at a
path whose name is not in ASCII.
* fg/submodule-non-ascii-path:
t7400: test of UTF-8 submodule names pass under Mac OS
handle multibyte characters in name
Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After refactoring __git_ps1_colorize_gitstring, codepaths for bash and zsh
became mostly common and tests for bash and zsh became redundant.
Remove tests for zsh. Keep one minimal test that stress the difference
in codepaths for bash and zsh.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt.sh lacks tests for PROMPT_COMMAND mode.
Add tests for:
* pcmode prompt without colors
* pcmode prompt with colors for bash
* pcmode prompt with colors for zsh
Having these tests enables an upcoming refactor in
a safe way.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch adds failing tests for the next patch that fixes them.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected SHA-1 digests are always available in variables. Use
them instead of hardcoding.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test cases are skipped on Windows by marking with POSIX prereq.
This is because arguments look like absolute paths (such as /a/b)
for regular Windows programs (*.exe executables, no bash scripts)
are changed to Windows paths (like C:/msysgit/a/b).
There is no cygpath nor equivalent on msysGit, but it is easy to
write one. New subcommand "mingw_path" is added in test-path-utils,
so that we can get the expected absolute paths on Windows. E.g.
COMMAND LINE Linux output Windows output
================================== ============ ===============
test-path-utils mingw_path / / C:/msysgit
test-path-utils mingw_path /a/b/ /a/b/ C:/msysgit/a/b/
With this utility, most skipped test cases in t0060 can be turned on
to be tested correctly on Windows.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Original design of relative_path() is simple, just strip the prefix
(*base) from the absolute path (*abs).
In most cases, we need a real relative path, such as: ../foo,
../../bar. That's why there is another reimplementation
(path_relative()) in quote.c.
Borrow some codes from path_relative() in quote.c to refactor
relative_path() in path.c, so that it could return real relative
path, and user can reuse this function without reimplementing
his/her own. The function path_relative() in quote.c will be
substituted, and I would use the new relative_path() function when
implementing the interactive git-clean later.
Different results for relative_path() before and after this refactor:
abs path base path relative (original) relative (refactor)
======== ========= =================== ===================
/a/b /a/b . ./
/a/b/ /a/b . ./
/a /a/b/ /a ../
/ /a/b/ / ../../
/a/c /a/b/ /a/c ../c
/x/y /a/b/ /x/y ../../x/y
a/b/ a/b/ . ./
a/b/ a/b . ./
a a/b a ../
x/y a/b/ x/y ../../x/y
a/c a/b a/c ../c
(empty) (null) (empty) ./
(empty) (empty) (empty) ./
(empty) /a/b (empty) ./
(null) (null) (null) ./
(null) (empty) (null) ./
(null) /a/b (segfault) ./
You may notice that return value "." has been changed to "./".
It is because:
* Function quote_path_relative() in quote.c will show the relative
path as "./" if abs(in) and base(prefix) are the same.
* Function relative_path() is called only once (in setup.c), and
it will be OK for the return value as "./" instead of ".".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add subcommand "relative_path" in test-path-utils, and add test cases
in t0060.
Johannes tested an earlier version of this patch on Windows, and
found that some relative_path tests should be skipped on
Windows. This is because the bash on Windows rewrites arguments of
regular Windows programs, such as git and the test helpers, if the
arguments look like absolute POSIX paths. As a consequence, the
actual tests performed are not what the tests scripts expect.
The tests that need *not* be skipped are those where the two paths passed
to 'test-path-utils relative_path' have the same prefix and the result is
expected to be a relative path. This is because the rewriting changes
"/a/b" to "D:/Src/MSysGit/a/b", and when both inputs are extended the same
way, this just cancels out in the relative path computation.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user will not be able to start to guess where in the
contents in the working tree the offending unsafe CR lies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "rebase --autostash" update made it impossible to recover
with "git am --abort" from a repository where "git am" without mbox
was run by mistake and then was killed with "^C".
* rr/am-quit-empty-then-abort-fix:
t/am: use test_path_is_missing() where appropriate
am: handle stray $dotest directory
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people often run 'git status -b'.
The config variable status.branch allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always run 'git status -s'.
The configuration variable status.short allows to set it by default.
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce test_pushdefault_workflows(), and test that all push.default
modes work with central and triangular workflows as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup creates two bare repositories: repo1 and repo2, but
test_push_commit() hard-codes checking in repo1 for the actual output.
Generalize it and its caller, test_push_success(), to optionally accept
a third argument to specify the name of the repository to check for
actual output. We will use this in the next patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Currently __gitdir() is duplicated in the git completion and prompt
scripts, while its tests are in the prompt test suite. This patch
series is about to change __git_ps1() in a way that it won't need
__gitdir() anymore and __gitdir() will be removed from the prompt
script.
So move all __gitdir() tests from the prompt test suite over to the
completion test suite. Update the setup tests so that they perform
only those steps that are necessary for each test suite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
This reverts commit 1a22bd31f0, reversing
changes made to 3e7a5b489e.
It makes it impossible to "git commit" when status.short is set, and
also "git status --porcelain" output is affected by status.branch.
Now that the "checkout" invoked internally from "rebase -i" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase -i: checkout master
instead of the old
rebase -i
As all the calls git-rebase--interactive make to underlying git
commands that leave reflog messages are preceded by the internal
comment_for_reflog helper function, which uses the original value of
the GIT_REFLOG_ACTION variable it saw when it first started, the new
assignments to GIT_REFLOG_ACTION actively contaminate the value of
the variable, knowing that it will be reset to a sane value before
it is used again. This does not generally hold true but it should
suffice for now.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mz/rebase-tests:
rebase topology tests: fix commit names on case-insensitive file systems
tests: move test for rebase messages from t3400 to t3406
t3406: modernize style
add tests for rebasing merged history
add tests for rebasing root
add tests for rebasing of empty commits
add tests for rebasing with patch-equivalence present
add simple tests of consistency across rebase types
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* rr/rebase-autostash:
rebase: finish_rebase() in noop rebase
rebase: finish_rebase() in fast-forward rebase
rebase: guard against missing files in read_basic_state()
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
With the new --valgrind-parallel=<n> option, we support running the
tests in a single test script under valgrind in parallel using 'n'
processes.
This really follows the dumbest approach possible, as follows:
* We spawn the test script 'n' times, using a throw-away
TEST_OUTPUT_DIRECTORY. Each of the instances is given options that
ensures that it only runs every n-th test under valgrind, but
together they cover the entire range.
* We add up the numbers from the individual tests, and provide the
usual output.
This is really a gross hack at this point, and should be improved. In
particular we should keep the actual outputs somewhere more easily
discoverable, and summarize them to the user.
Nevertheless, this is already workable and gives a speedup of more
than 2 on a dual-core (hyperthreaded) machine, using n=4. This is
expected since the overhead of valgrind is so big (on the order of 20x
under good conditions, and a large startup overhead at every git
invocation) that redundantly running the non-valgrind tests in between
is not that expensive.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not really meant for external use, and thus not documented. It
allows the next commit to neatly distinguish between sub-tests and the
main run.
The format is intentionally not valid TAP. The use in the next commit
would not result in anything valid either way, and it seems better to
make it obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --valgrind-only=<pattern> option, one can enable
--valgrind at a per-test granularity, exactly analogous to
--verbose-only from the previous commit.
The options are wired such that --valgrind implies --verbose (as
before), but --valgrind-only=<pattern> implies
--verbose-only=<pattern> unless --verbose is also in effect.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --verbose-only=<pattern> option, one can enable --verbose
at a per-test granularity. The pattern is matched against the test
number, e.g.
./t0000-basic.sh --verbose-only='2[0-2]'
to see only the full output of test 20-22, while showing the rest in the
one-liner format.
As suggested by Jeff King, this takes care to wrap the entire
test_expect_* block, but nothing else, in the verbose toggling. We
can use the test_start/end functions from the previous commit for the
purpose.
This is arguably not *too* useful on its own, but makes the next patch
easier to follow.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000 contains some light self-tests of test-lib.sh, but --verbose was
not covered. Add a test.
The only catch is that the presence of a test harness influences the
output (specifically, the presence of some empty lines). So we need
to unset TEST_HARNESS or set it to a known value. Leaving it unset
leads to spurious test failures in the final summary, which come from
the subtest. So we always set it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace instances of ! test -f with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0442743 introduced an <IfVersion> directive near the
top of the apache config file. However, at that point we
have not yet checked for and loaded the mod_version module.
This means that the directive will behave oddly if
mod_version is dynamically loaded, failing to match when it
should.
We can fix this by moving the whole block below the
LoadModule directive for mod_version.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the --topo/date-order test vector a bit and mark the author
dates of two commits (a2 and a3) earlier than their own committer
dates, making them much older than other commits that are made on
parallel branches to simulate the case where a long running topic
was rebased recently.
They will show up as recent in the --date-order output due to their
timestamps, but they appear a lot later in the --author-date-order
output, even though their committer timestamp says otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce on_dates helper that is similar to on_committer_date but
also sets the author date, not just the committer date.
At this step, just set the same timestamp to the author date as the
committer date, as no test looks at author date yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--date-order" output is a slight twist of "--topo-order" in
that commits from parallel histories are shown in their committer
date order without an attempt to clump commits from a single line
of history together like --topo-order does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on_committer_date helper in t/lib-t6000 is used in t6002 and
t6003 with timestamps on a single day within a single minute
(i.e. 1971-08-16 00:00) and the tests repeat this over and over.
The actual value of the timestamp, however, does not matter very
much; only their relative ordering does.
Introduce another helper to expand only the suffix of the timestamp
to a full timestamp to make the lines shorter, and use it in this
helper. Also, because all the commits in the test are made with
specific GIT_COMMITTER_DATE, stop unsetting it at the end of the
helper.
We'll be specifying the author timestamp to these test commits in a
later patch, which will be helped with this change.
Also remove a test that was commented-out from t6003; it used to
test a commit with the same parent listed twice, which was allowed
by mistake but was fixed long time ago.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit 81d340d4, we did not print any error message
if a remote transport helper died unexpectedly. If a helper
did not print any error message (e.g., because it crashed),
the user could be left confused. That commit tried to
rectify the situation by printing a note that the helper
exited unexpectedly.
However, this makes a much more common case worse: when a
helper does die with a useful message, we print the extra
"Reading from 'git-remote-foo failed" message. This can also
end up confusing users, as they may not even know what
remote helpers are (e.g., the fact that http support comes
through git-remote-https is purely an implementation detail
that most users do not know or care about).
Since we do not have a good way of knowing whether the
helper printed a useful error, and since the common failure
mode is for it to do so, let's default to remaining quiet.
Debuggers can dig further by setting GIT_TRANSPORT_HELPER_DEBUG.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2901bbe (apply: free patch->{def,old,new}_name fields, 2012-03-21)
cleaned up the memory management of filenames in the patches, but
forgot that find_name_traditional() can return NULL as a way of saying
"I couldn't find a name".
That NULL unfortunately gets passed into xstrdup() next, resulting in
a segfault. Use null_strdup() so as to safely propagate the null,
which will let us emit the correct error message.
Reported-by: DevHC on #git
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests that check the behaviour of symbolic links stored in the
index or the tree objects do not have to be skipped on a filesystem
that lack symbolic link support.
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
The logic for pulling into an unborn branch was originally
designed to be used on a newly-initialized repository
(d09e79c, git-pull: allow pulling into an empty repository,
2006-11-16). It thus did not initially deal with
uncommitted changes in the unborn branch. The case of an
_unstaged_ untracked file was fixed by 4b3ffe5 (pull: do not
clobber untracked files on initial pull, 2011-03-25).
However, it still clobbered existing staged files, both when
the file exists in the merged commit (it will be
overwritten), and when it does not (it will be deleted).
We fix this by doing a two-way merge, where the "current"
side of the merge is an empty tree, and the "target" side is
HEAD (already updated to FETCH_HEAD at this point). This
amounts to claiming that all work in the index was done vs.
an empty tree, and thus all content of the index is
precious.
Note that this use of read-tree just gives us protection
against overwriting index and working tree changes. It will
not actually result in a 3-way merge conflict in the index.
This is fine, as this is a rare situation, and the conflict
would not be interesting anyway (it must, by definition, be
an add/add conflict with the whole content conflicting). And
it makes it simpler for the user to recover, as they have no
HEAD to "git reset" back to.
Reported-by: Stefan Schüßler <mail@stefanschuessler.de>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodules with names using UTF-8 need core.precomposeunicode true
under Mac OS X, set it in the test case.
Improve the portability:
- Not all shells on all OS may understand literal UTF-8 strings.
- Use a help variable filled by printf, as we do it in e.g. t0050.
"strange names" can be called UTF-8, rephrase the heading.
While at it, unbreak &&-chain in the test, and use test_config.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sender is now sanitized, but we didn't sanitize author when checking
whether From: line is needed in the message body.
As a result git started writing duplicate From: lines when author
matched sender and has utf8 characters.
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that author name is not duplicated if it matches sender, even
if it is in utf8 (the test expects a failure that will be fixed in
the next patch).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line
test_config push.default upstream
appears unnecessarily in two tests, as the final test_push_failure sets
push.default before pushing anyway.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of the patch is to introduce the GNU diff
-B/--ignore-blank-lines as closely as possible. The short option is not
available because it's already used for "break-rewrites".
When this option is used, git-diff will not create hunks that simply
add or remove empty lines, but will still show empty lines
addition/suppression if they are close enough to "valuable" changes.
There are two differences between this option and GNU diff -B option:
- GNU diff doesn't have "--inter-hunk-context", so this must be handled
- The following sequence looks like a bug (context is displayed twice):
$ seq 5 >file1
$ cat <<EOF >file2
change
1
2
3
4
5
change
EOF
$ diff -u -B file1 file2
--- file1 2013-06-08 22:13:04.471517834 +0200
+++ file2 2013-06-08 22:13:23.275517855 +0200
@@ -1,5 +1,7 @@
+change
1
2
+
3
4
5
@@ -3,3 +5,4 @@
3
4
5
+change
So here is a more thorough description of the option:
- real changes are interesting
- blank lines that are close enough (less than context size) to
interesting changes are considered interesting (recursive definition)
- "context" lines are used around each hunk of interesting changes
- If two hunks are separated by less than "inter-hunk-context", they
will be merged into one.
The implementation does the "interesting changes selection" in a single
pass.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves
* the early setup part from test_skip to a new function test_start_
* the final common parts of test_expect_* to a new function
test_finish_
to make the next commit more obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's already used twice, and we will have more of the same kind of
matching in a minute.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit fa83a33b, the 'git checkout' DWIMery would create a
new local branch if the specified branch name did not exist and it
matched exactly one ref in the "remotes" namespace. It searched
the "remotes" namespace for matching refs using a simple comparison
of the trailing portion of the remote ref names. This approach
could sometimes produce false positives or negatives.
Since fa83a33b, the DWIMery more strictly excludes the remote name
from the ref comparison by iterating through the remotes that are
configured in the .gitconfig file. This has the side-effect that
any refs that exist in the "remotes" namespace, but do not match
the destination side of any remote refspec, will not be used by
the DWIMery.
This change in behavior breaks the tests in t9802 which relied on
the old behavior of searching all refs in the remotes namespace,
since the git-p4 script does not configure any remotes in the
.gitconfig. Let's work around this in these tests by explicitly
naming the upstream branch to base the new local branch on when
calling 'git checkout'.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced tests used uppercase letters to denote
cherry-picks of commits having the corresponding lowercase letter names.
The helper functions also set up tags with the names of the commits.
But this constellation fails on case-insensitive file systems because
there cannot be distinct tags with names that differ only in case.
Use a less subtle convention for the names of cherry-picked commits.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new rev-parse --prefix option to process all paths given to the
submodule command, dropping the requirement that it be run from the
top-level of the repository.
Since the interpretation of a relative submodule URL depends on whether
or not "remote.origin.url" is configured, explicitly block relative URLs
in "git submodule add" when not at the top level of the working tree.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes 'git rev-parse' behave as if it were invoked from the
specified subdirectory of a repository, with the difference that any
file paths which it prints are prefixed with the full path from the top
of the working tree.
This is useful for shell scripts where we may want to cd to the top of
the working tree but need to handle relative paths given by the user on
the command line.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the indentation to use tabs consistently and start content on the
line after the paren opening a subshell.
Also don't put a space in ">file" and remove ":" from ": >file" to be
consistent with the majority of tests elsewhere.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1b3185f (MALLOC_CHECK: various clean-ups, 2012-09-14) moved around the
MALLOC_CHECK_ and MALLOC_PERTURB_ assignments, intending to limit
their effect to only the test runs. However, they were actually
enabled only during test cleanup. Call setup/teardown_malloc_check
also around the evaluation of the actual test snippet.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick is in progress, 'git status' gives the advice to
run "git commit" to finish the cherry-pick.
However, this won't continue the sequencer, when picking a range of
commits.
Advise users to run "git cherry-pick --continue/--abort"; they work
when picking a single commit as well.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'make test' from a path such as
.../daily-build/master@bdff0e3a374617dce784f801b97500d9ba2e4705, the
logic in fuzz.sed as generated by t5105-request-pull.sh was backwards,
replacing object names before replacing urls, making the test fail.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
save_stash() contains the logic for doing two potentially independent
operations; the first is preparing the stash merge commit, and the
second is updating the stash ref/ reflog accordingly. While the first
operation is abstracted out into a create_stash() for callers to access
via 'git stash create', the second one is not. Fix this by factoring
out the logic for storing the stash into a store_stash() that callers
can access via 'git stash store'.
Like create, store is not intended for end user interactive use, but for
callers in other scripts. We can simplify the logic in the
rebase.autostash feature using this new subcommand.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_REFLOG_ACTION is an environment variable specifying the reflog
message to write after an action is completed. Several other commands
including merge, reset, and commit respect it.
Fix the failing tests in t/checkout-last by making checkout respect it
too. You can now expect
$ git checkout -
to work as expected after any operation that internally uses "checkout"
as its implementation detail, e.g. "rebase".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
