In 't9811-git-p4-label-import.sh' the test 'tag that cannot be
exported' runs
!(p4 labels | grep GIT_TAG_ON_A_BRANCH)
to check that the given string is not printed by 'p4 labels'. This is
problematic, because according to POSIX [1]:
"If the pipeline begins with the reserved word ! and command1 is a
subshell command, the application shall ensure that the ( operator
at the beginning of command1 is separated from the ! by one or more
<blank> characters. The behavior of the reserved word ! immediately
followed by the ( operator is unspecified."
While most common shells still interpret this '!' as "negate the exit
code of the last command in the pipeline", 'mksh/lksh' don't and
interpret it as a negative file name pattern instead. As a result
they attempt to run a command made up of the pathnames in the current
directory (it contains a single directory called 'main'), which, of
course, fails the test.
We could fix it simply by adding a space between the '!' and '(', but
instead let's fix it by removing the unnecessary subshell.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09_02
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the comments in 't/lib-git-p4.sh', sometimes 'p4d' seems
to hang, and to deal with that 'start_p4d' starts a watchdog process
to kill it after a long-enough timeout ($P4D_TIMEOUT, defaults to
300s). This watchdog process is implemented as a background subshell
loop iterating once every second until the timeout expires, producing
a few lines of trace output on each iteration when the test script is
run with '-x' tracing enabled. The watchdog loop's trace gets
intermixed with the real test output and trace, and makes that harder
to read.
Send the trace output of this loop to /dev/null to avoid polluting the
real test output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'lib-git-p4.sh' uses timeouts in a watchdog process to kill a
potentially stuck 'p4d' process and for certain cleanup operation
between tests. It does so by first computing when the timeout should
expire, and then repeatedly asking for the current time in seconds
until it exceeds the expiration time, and for portability reasons it
uses a one-liner Python script to ask for the current time.
Replace these timeouts with downcounters, which, though not
necessarily shorter, are much simpler, at least in the sense that they
don't execute the Python interpreter every second.
After this change the helper function with that Python one-liner has
no callers left, remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Confusingly, the 'git p4' tests used two cleanup functions:
- 'kill_p4d' was run in the last test before 'test_done', and it not
only killed 'p4d', but it killed the watchdog process, and cleaned
up after 'p4d' as well by removing all directories used by the P4
daemon and client.
This cleanup is not necessary right before 'test_done', because
the whole trash directory is about to get removed anyway, but it
is necessary in 't9801-git-p4-branch.sh', which uses 'kill_p4d' to
stop 'p4d' before re-starting it in the middle of the test script.
- 'cleanup' was run in the trap on EXIT, and it killed 'p4d', but,
it didn't kill the watchdog process, and, contrarily to its name,
didn't perform any cleanup whatsoever.
Make it clearer what's going on by renaming and simplifying the
cleanup functions, so in the end we'll have:
- 'stop_p4d_and_watchdog' replaces 'cleanup' as it will try to live
up to its name and stop both the 'p4d' and the watchdog processes,
and as the sole function registered with 'test_atexit' it will be
responsible for no leaving any stray processes behind after 'git p4'
tests were finished or interrupted.
- 'stop_and_cleanup_p4d' replaces 'kill_p4d' as it will stop 'p4d'
(and the watchdog) and remove all directories used by the P4
daemon and cliean, so it can be used mid-script to stop and then
re-start 'p4d'.
Note that while 'cleanup' sent a single SIGKILL to 'p4d', 'kill_p4d'
was quite brutal, as it first sent SIGTERM to the daemon repeatedly,
either until its pid disappeared or until a given timeout was up, and
then it sent SIGKILL repeatedly, for good measure. This is overkill
(pardon the pun): a single SIGKILL should be able to take down any
process in a sensible state, and if a process were to somehow end up
stuck in the dreaded uninterruptible sleep state then even repeated
SIGKILLs won't bring immediate help. So ditch all the repeated
SIGTERM/SIGKILL parts, and use a single SIGKILL to stop 'p4d', and
make sure that there are no races between asynchron signal delivery
and subsequent restart of 'p4d' by waiting for it to die.
With this change the 'retry_until_fail' helper has no callers left,
remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'test_atexit' to run cleanup commands to stop 'p4d' at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Note that one of the test scripts, 't9801-git-p4-branch.sh', stops and
then re-starts 'p4d' twice in the middle of the script; take care that
the cleanup functions to stop 'p4d' are only registered once.
Note also that 'git p4' tests invoke different functions in the trap
on EXIT ('cleanup') and in the last test before 'test_done'
('kill_p4d'). Register both of these functions with 'test_atexit' for
now, and a a later patch in this series will then clean up the
redundancy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'test_atexit' to run cleanup commands to stop the credentials
helper at the end of the test script or upon interrupt or failure, as
it is shorter, simpler, and more robust than registering such cleanup
commands in the trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'test_atexit' to run cleanup commands to stop 'git-daemon' at the
end of the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Note that in 't5570-git-daemon.sh' the daemon is stopped and then
re-started in the middle of the test script; take care that the
cleanup functions to stop the daemon are only registered once.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running Apache, 'git daemon', or p4d, we want to kill them at the
end of the test script, otherwise a leftover daemon process will keep
its port open indefinitely, and thus will interfere with subsequent
executions of the same test script.
So far, we stop these daemon processes "manually", i.e.:
- by registering functions or commands in the trap on EXIT to stop
the daemon while preserving the last seen exit code before the
trap (to deal with a failure when run with '--immediate' or with
interrupts by ctrl-C),
- and by invoking these functions/commands last thing before
'test_done' (and sometimes restoring the test framework's default
trap on EXIT, to prevent the daemons from being killed twice).
On one hand, we do this inconsistently, e.g. 'git p4' tests invoke
different functions in the trap on EXIT and in the last test before
'test_done', and they neither restore the test framework's default trap
on EXIT nor preserve the last seen exit code. On the other hand, this
is error prone, because, as shown in a previous patch in this series,
any output from the cleanup commands in the trap on EXIT can prevent a
proper cleanup when a test script run with '--verbose-log' and certain
shells, notably 'dash', is interrupted.
Let's introduce 'test_atexit', which is loosely modeled after
'test_when_finished', but has a broader scope: rather than running the
commands after the current test case, run them when the test script
finishes, and also run them when the test is interrupted, or exits
early in case of a failure while the '--immediate' option is in
effect.
When running the cleanup commands at the end of a successful test,
then they will be run in 'test_done' before it removes the trash
directory, i.e. the cleanup commands will still be able to access any
pidfiles or socket files in there. When running the cleanup commands
after an interrupt or failure with '--immediate', then they will be
run in the trap on EXIT. In both cases they will be run in
'test_eval_', i.e. both standard error and output of all cleanup
commands will go where they should according to the '-v' or
'--verbose-log' options, and thus won't cause any troubles when
interrupting a test script run with '--verbose-log'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 'start_git_daemon' starts 'git daemon' (note the space in the
middle) in the background, it saves the background process' PID, so
the daemon can be stopped at the end of the test script. However,
'git-daemon' is not a builtin but a dashed external command, which
means that the dashless 'git daemon' executes the dashed 'git-daemon'
command, and, consequently, the PID recorded is not the PID of the
"real" daemon process, but that of the main 'git' wrapper. Now, if a
test script involving 'git daemon' is interrupted by ctrl-C, then only
the main 'git' process is stopped, but the real daemon process tends
to survive somehow, and keeps on running in the background
indefinitely, keeping the daemon's port to itself, and thus preventing
subsequent runs of the same test script.
Work this around by running 'git daemon' with the '--pidfile=...'
option to save the PID of the real daemon process, and kill that
process in 'stop_git_daemon' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test script run with 'dash' and '--verbose-log -x' is
interrupted by ctrl-C, SIGTERM, or closing the terminal window, then
most of the time the registered EXIT trap actions are not executed.
This is an annoying issue with tests involving daemons, because they
should run cleanup commands to kill those daemon processes in the trap
on EXIT, but since these cleanup commands are not executed, the
daemons are left alive and keep their port open, thus interfering with
subsequent execution of the same test script.
The cause of this issue is the subtle combination of several factors
(bear with me, or skip over the indented part):
- Even when the test script is interrupted, the cleanup commands are
not run in the trap on INT, TERM, or HUP, but in the trap on EXIT
after the trap on the signals invokes 'exit' [1].
- According to POSIX [2]:
"The environment in which the shell executes a trap on EXIT
shall be identical to the environment immediately after the last
command executed before the trap on EXIT was taken."
Pertinent to the issue at hand is that all open file descriptors
and the state of '-x' tracing should be preserved. All shells
I've tried [3] preserve '-x'. Unfortunately, however:
- 'dash' doesn't conform to this when it comes to open file
descriptors: even when standard output and/or error are
redirected somewhere when 'exit' is invoked, anything written
to them in the trap on EXIT goes to the script's original
stdout and stderr [4].
We can't dismiss this with a simple "it doesn't conform to
POSIX, so we don't care", because 'dash' is the default
/bin/sh in some of the more popular Linux distros.
- As far as I can tell, POSIX doesn't explicitly say anything
about the environment of trap actions for various signals.
In practice it seems that most shells behave sensibly and
preserve both open file descriptors and the state of '-x'
tracing for the traps on INT, TERM, and HUP, including even
'dash'. The exceptions are 'mksh' and 'lksh': they do
preserve '-x', but not the open file descriptors.
- When a test script run with '-x' tracing enabled is interrupted,
then it's very likely that the signal arrives mid-test, i.e.:
- while '-x' tracing is enabled, and, consequently, our trap
actions on INT, TERM, HUP, and EXIT will produce trace output
as well.
- while standard output and error are redirected to a log file,
to the test script's original standard output and error, or to
/dev/null, depending on whether the test script was run with
'--verbose-log', '-v', or neither. According to the above, we
can't rely on these redirections still be in effect when
running the traps on INT, TERM, HUP, and/or EXIT.
- When a test script is run with '--verbose-log', then the test
script is re-executed with its standard output and error piped
into 'tee', in order to send the "regular" non-verbose test's
output both to the terminal and to the log file. When the test is
interrupted, then the signal interrupts the downstream 'tee' as
well.
Putting these together, when a test script run with 'dash' and
'--verbose-log -x' is interrupted, then 'dash' tries to write the
trace output from the EXIT trap to the script's original standard
error, but it very likely can't, because the 'tee' downstream of the
pipe is interrupted as well. This causes the shell running the test
script to die because of SIGPIPE, without running any of the commands
in the EXIT trap.
Disable '-x' tracing in the trap on INT, TERM, and HUP to avoid this
issue, as it disables tracing in the chained trap on EXIT as well.
Wrap it in a '{ ... } 2>/dev/null' block, so the trace of the command
disabling the tracing doesn't go to standard error either [5].
Note that it's not only '-x' tracing that can be problematic, but any
shell builtin, e.g. 'echo', that writes to standard output or error in
the trap on EXIT, while a test running with 'dash' and '--verbose-log'
(even without '-x') is interrupted. As far as I can tell, this is not
an issue at the moment:
- The cleanup commands to stop the credential-helper, Apache, or
'p4d' don't use any such shell builtins.
- stop_git_daemon() does use 'say' and 'error', both wrappers around
'echo', but it redirects 'say' to fd 3, i.e. to the log file, and
while 'error' does write to standard output, it comes only after
the daemon was killed.
- The non-builtin commands that actually stop the daemons ('kill',
'apache2 -k stop', 'git credential-cache exit') are silent, so they
won't get SIGPIPE before finishing their job.
[1] The trap on EXIT must run cleanup commands, because we want to
stop any daemons when a test script run with '--immediate' fails
and exits early with error. By chaining up the trap on signals to
the trap on EXIT we can deal with cleanup commands a bit simpler,
because the tests involving daemons only have to set a single
trap.
[2] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#trap
[3] The shells I tried: dash, Bash, ksh, ksh93, mksh, lksh, yash,
BusyBox sh, FreeBSD /bin/sh, NetBSD /bin/sh.
[4] $ cat trap-output.sh
#!/bin/sh
trap "echo output; echo error >&2" EXIT
{ exit; } >OUT 2>ERR
$ dash ./trap-output.sh
output
error
$ wc -c OUT ERR
0 OUT
0 ERR
On a related note, 'ksh', 'ksh93', and BusyBox sh don't conform to
the specs in this respect, either.
[5] This '{ set +x; } 2>/dev/null' trick won't help those shells that
show trace output for any redirections and don't preserve open
file descriptors for the trap on INT, TERM and HUP. The only such
shells I'm aware of are 'mksh' and 'lksh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
The include file compat/bswap.h has been updated so that it is safe
to (accidentally) include it more than once.
* jk/guard-bswap-header:
compat/bswap: add include header guards
Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c3 (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20d2a30f8f (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10), Git stopped using MakeMaker. Therefore, that
definition in the MINGW-specific section became useless.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify RPC code for smart http in protocol v0/v1 and v2, which fixes
a bug in the latter (lack of authentication retry) and generally
improves the code base.
* jt/http-auth-proto-v2-fix:
remote-curl: use post_rpc() for protocol v2 also
remote-curl: refactor reading into rpc_state's buf
remote-curl: reduce scope of rpc_state.result
remote-curl: reduce scope of rpc_state.stdin_preamble
remote-curl: reduce scope of rpc_state.argv
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
Code clean-up.
* jk/unused-params:
ref-filter: drop unused "sz" parameters
ref-filter: drop unused "obj" parameters
ref-filter: drop unused buf/sz pairs
files-backend: drop refs parameter from split_symref_update()
pack-objects: drop unused parameter from oe_map_new_pack()
merge-recursive: drop several unused parameters
diff: drop complete_rewrite parameter from run_external_diff()
diff: drop unused emit data parameter from sane_truncate_line()
diff: drop unused color reset parameters
diff: drop options parameter from diffcore_fix_diff_index()
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
"git prune-packed" did not notice and complain against excess
arguments given from the command line, which now it does.
* rj/prune-packed-excess-args:
prune-packed: check for too many arguments
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
The %(trailers) formatter in "git log --format=..." now allows to
optionally pick trailers selectively by keyword, show only values,
etc.
* aw/pretty-trailers:
pretty: add support for separator option in %(trailers)
strbuf: separate callback for strbuf_expand:ing literals
pretty: add support for "valueonly" option in %(trailers)
pretty: allow showing specific trailers
pretty: single return path in %(trailers) handling
pretty: allow %(trailers) options with explicit value
doc: group pretty-format.txt placeholders descriptions
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
Correct misspelled ".gitattribute" in comments only, so no functional
change.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`UTF-16-LE-BOM` to `UTF-16LE-BOM`.
this closes https://github.com/git-for-windows/git/issues/2095
Signed-off-by: Yash Bhatambare <ybhatambare@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
