The project menu is just too cluttered without using separator entries
to split out the database operations (such as repack and verify) from
the other options in the same menu.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It would be something of a disservice to our users if we refer to
fsck-objects as "verify". So instead we call it fsck-objects in
the console title, and indicate that's how we are verifying the
object database.
We probably should call our menu option "fsck-objects" or similar
but I really do think that "Verify Database" more accurately describes
the action then "fsck-objects" does, especially to users who aren't
file system developers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we don't automatically restart in amend mode when we quit while
in amend mode the commit message buffer shouldn't be saved to GITGUI_MSG
as it would be misleading when the user restarts the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I recently found a need to run fsck-objects in a number of repositories
that I also use git-gui against. Tossing in a menu option to invoke
fsck-objects and have its output show up in a console window is simple
enough to do.
We probably need to enhance the console window used by fsck-objects,
like to open up the Git fsck-objects manual page and let the user see
what each message means (such as "dangling commit") and to also let the
user invoke prune, to cleanup any such dangling objects. But right now
I'm going to ignore that problem in favor of getting other more important
features implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its useful to be able to amend the last commit even if it was a merge
commit, so we really should support that in the gui. We now do so by
making PARENT a list. We always diff against the first parent but we
create a commit consisting of the parent(s) listed in this list, in
order.
We also should recheck the repository state during an amend. Earlier
I was bitten by this exact bug when I switched branches through a
command prompt and then did not do a rescan in git-gui. When I hit
"Amend Last Commit" I was surprised to see information from the prior
branch appear. This was due to git-gui caching the data from the last
rescan and using that data form the amend data load request, rather than
the data of the current branch.
Improved error text in the dialogs used to tell the user why an amend is
being refused by git-gui. In general this is only during an initial
commit (nothing prior to amend) and during a merge commit (it is simply
too confusing to amend the last commit while also trying to complete a
merge).
Fixed a couple of minor bugs in the pull logic. Since this code isn't
really useful nobody has recently tested it and noticed the breakage.
It really needs to be rewritten anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to allow the user to toggle include/exclude from next commit
for files which were partially included in the last commit we need the
current index mode+sha1 data stored in our file_states array. For
any partially included file we have this information from diff-files,
so we just have to copy it over to the diff-index portion of our state
array.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The tags used for diff formatting (which I inherited from gitool) just
didn't make a whole lot of sense, especially if you wanted to try to
match them to the diff output you were seeing on screen. It did not
help that the diff-index -c output's first two columns are also munged
to make the diff output more user friendly.
So this is a large refactoring of the tags used for diff display. Now
our tag names match what we put in the left column of each line, which
makes it easier to correlate presentation and implementation.
I removed bold font usage from everything except the hunk headers as I
really did not like the way bold font caused column alignments to become
out of whack within the diff viewer. It also drew attention to the parts
of the file which were identically changed in both the index and in the
working directory, yet these are usually the parts I find myself caring
the least about. So its very counter-intuitive.
Lines which are changed differently by both the index and the working
directory are now shown with background colors which span the entire line,
making these lines easier to pick out of the diff. In general these are
the lines that appear to be more interesting to me when looking at the
3-way diff as they are the ones which contain recent and quite different
changes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
New files also lack index data from diff-files therefore we cannot use
their diff-files index data when we update-index. Instead we can use
the fact that Git has them hardcoded as "0 0{40}" and do the same thing
ourselves. This way you can toggle an untracked file into added status
and back out to untracked.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently core-git's diff utilities report a deleted symlink as a
deleted file with a mode of 120000. This is not nearly as user
friendly as one might like, as the user must remember that 120000
is the UNIX mode bits for a symlink. So instead we transform
the not-so-friendly message from core-git into a slightly more
user friendly "deleted symlink" message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Tcl let me assign two different types of values to the variable $n.
Prior to 1461c5f3 $n was the total number of bytes in the string;
but in that commit it also became the current info list for the
current file. This caused $c < $n to fail as $n was now treated
as 0 and we only loaded the first file in each buffer.
So use a different variable, like $i, instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a bug with the way we handled deleted file status. A file
really shouldn't be in D_ state when it has been deleted, instead it
is really DD. Therefore we should have toggled _D to DD, not D_,
thereby letting us toggle back to _D.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user clicks on the icon associated with a file we now flip to the
inverse status. Partially included files first fully include, then fully
uninclude, as we don't keep track of intermediate partial inclusions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes the user may want to keep their working directory file to be
the same content but they don't want it to be part of the current commit
anymore. In this case we need to undo any changes made to the index
for that file (by reloading the info from HEAD or removing the file
from the index) but leave the working directory alone.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Turns out that we really don't need the Contents/PkgInfo file on Mac OS
10.4. The Finder will still launch the application properly without one.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The previous implementation of do_include_selection did not actually
add files in state _O (untracked, not added) into the repository when
they were in the selection and Commit->Include Selected Files was used.
This was due to the file state filtering logic being the same as that
of Commit->Include All Files, which only considers existing files.
Also fixed a minor issue with rejected attempts to amend an initial
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its not an error that a rescan is required before commit; its just
something we do as a safety feature to try and ensure the user knows
what is going into this commit. So the dialog should use the info
icon (if one is used by the host OS) rather than the error icon.
Its also not "highly likely" that another Git program modified the
repository, its completely the case. There is no reason why the
repository would not match our last scanned state unless another
Git program modified the repository (or someone else did so by hand).
So don't be vague about it, own up to the issue and go on with our
business.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-commit also checks that the user has a GIT_COMMITTER_IDENT
value before it lets the user make a commit we should do the same check
here in git-gui. We cache the result and assume that the user won't
do something which would change the status of GIT_COMMITTER_IDENT while
we are running.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I was starting to find it annoying that once you entered the 'Amend Last'
mode there was no way to go back to the 'New Commit' mode without quitting
and restarting git-gui. Its just confusing for the end-user.
Now we can flip back and forth between a new commit and an amend commit
through a pair of radio buttons on the header of the commit buffer area
and through a pair of radio menu buttons in the Commit menu.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we immediately start a rescan operation, but do so slightly
delayed (by 1 ms, to let the UI show before we start forking off
git processes), we can't let the user try to activate any of the
restricted GUI commands before the 1 ms timer expires and we kick
off the rescan.
So now we lock the index before we enter the Tk event loop, ensuring
that it is impossible for the user to inject a conflicting UI event
before our rescan can begin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the user selects a number of files they would typically expect
to be able to act on that selection, such as by including those files
into the next commit.
So we now have a menu option under the Commit menu that lets the user
include only the selection, rather than everything. If there is no
selection but there is a file in the diff viewer than we consider that
to be the selection (a selection of 1). Unfortunately we don't disable
this option yet when there's nothing selected to include, but this is
probably not a big deal as there are very few situations where there
are no selected files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It just felt wrong to me that I was using _ as part of the mode argument
to display_file to mean "don't care/use existing" and * as part of
the mode argument to mean "force to _".
So instead use ? to mean "don't care/use existing" and _ to mean
"force to _". The code is a lot clearer this way and hopefully it
won't drive another developer insane, as it did me.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I noticed that we were reshowing the current diff during a commit;
this occurs because we feed every added and modified file through
update-index just before commit. During the update-index process
we reshow the current diff if the current file in the diff pane
was one of those added or modified files we reprocessed. This
just slows down the UI more than is necessary.
So refactoring update_index so that we don't call reshow_diff
from within that code; instead we do it at a higher level.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently I never really tested the logic for making or amending an
initial commit, so although most of the code was here in git-gui it
didn't quite work as it was intended to.
So this is all just bug fixes to make initial commits correctly
generate the list of files going into the initial commit, or to
show a newly added file's diff, and to amend an initial commit.
Because we really want to diff the index against a tree-ish and
there is no such tree-ish on an initial commit we create an empty
tree through git-mktree and diff against that. This unfortunately
creates a dangling tree, which may confuse a new user who uses
git-gui to make a new commit and then immediately afterwards runs
git fsck-objects to see if their object database is corrupt or not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we can't locate a .git directory for the given directory we need to
show a message to the user to let them know the directory wasn't found.
But since this is before we have shown our main application window we
cannot use that as the parent for the error popup; on Mac OS X this
causes an error and prevents the dialog from showing.
Instead only add -parent . to the popup call if we have mapped (shown)
the main window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a user works with a repository frequently they may want to just
create an icon they can use to launch git-gui against that repository.
Since we already support this concept on Windows we can do the same on
Mac OS X by creating a .app file with a tiny shell script in it that
sets up the necessary environment then invokes our script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Don't offer to fetch from a remote unless we have at least one Pull:
line in its .git/remotes/<name> file or at least one configuration
value for remote.<name>.fetch. Ditto for push.
Users shouldn't be fetching or pushing branch groups unless they
have them configured; anything else is just crazy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we have some serious problems with the GIT_DIR environment variable
on Windows we cannot let the user use a non-standard GIT_DIR with their
working directory.
So require that the GIT_DIR name is actually ".git", that it exists,
and that its parent directory is our working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are running on Windows we now offer a 'Create Desktop Icon' menu
item under the Project menu. This pops up a save dialog box letting
the user create a .bat file on their desktop (or somewhere else). The
.bat script will startup Cygwin with a login shell then launch git-gui
in the current working directory.
This is very useful for Windows users who have little to no desire to
start a command window just to run a git-gui session.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some users may want to start us by running "git --git-dir=... gui"
rather than trying to cd into the directory first. This is especially
true if they want to just make a shortcut to our executable on Windows
and always have that associated with a certain repository.
Since Tcl on Windows throws away our environment and doesn't pass it
down to the child process correctly we cannot call git-rev-parse to
get the GIT_DIR environment variable. So instead we ask for it
specifically ourselves; if its not defined then we ask rev-parse.
This should actually reduce startup by 1 fork/exec if we were started
as "git gui" as GIT_DIR will be set for us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we want to be installed in gitexecdir so that "git gui" works we
can guess where that directory is by asking the git wrapper executable
and locating ourselves at the same location using the same install
rules as core git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is no reason why the user should be able to operate on the diff
buffer if there is no currently selected diff; likewise the "File:"
label text appears rather silly looking all by itself when no diff
is being shown in the diff buffer.
So now we only enable widgets (like menu items) if there is a diff
currently showing, and we disable them when a diff isn't showing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has "Allow Partially Included Files" disabled (and most
probably will as its the default setting) we should run update-index
on every included file before commit to make sure that any changes
made by the user since the last rescan will still be part of this
commit.
If we don't update-index every modified file the user will likely
become confused when part of their changes were committed and other
parts weren't; and those other parts won't show up until a later
rescan occurs. Since we don't rescan immediately after a commit
this may be a while.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like rescan we also have cases where we need to perform a script
after we have finished updating a number of files in the index. By
changing the parameter structure of update_index we can easily pass
through any script we need to run afterwards, such as picking up
in the middle of a commit, or finishing what is left of a rescan.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There are some situations where we need to run rescan and have it do
more than just updating the status in the UI when its complete. To
help with that this changes the rescan procedure to take a script which
it will run at the global level as soon as the rescan is done and the
UI has finished updating with the results. This is useful for example
if we performed a rescan as part of a commit operation; we can go back
to the commit where we left off when the rescan got initiated.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we refer to the act of updating our memory structures with index
and working directory differences as a rescan in the UI its probably
a good idea to make the related procedures have the same name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because I want to let users apply actions to more than one file at
a time we really needed a concept of "the current selection" from
the two file lists.
Since I'm abusing a Tk text widget for the file displays I can't
really use the Tk selection to track which files are picked and
which aren't. So instead we keep this in an array to tell us
which paths are currently selected and we use an inverse fg/bg
for the selected file display. This is common most operating
systems as a selection indicator.
The selection works like most users would expect; single click will
clear the selection and pick only that file, M1-click (aka Ctrl-click
or Cmd-click) will toggle the one file in/out of the selection, and
Shift-click will select the range between the last clicked file and
the currently clicked file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Mac OS X the no differences informational message was linewrapped
at the wrong points due to the limited width of the system dialog,
yet the LFs embedded in the message (where I linewrapped it manually)
were also being honored. This resulted in a very difficult to read
paragraph of text.
So this narrows the text down by another 10 columns or so, making it
more readable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm not a huge fan of putting the left and right mouse actions into
the same procedure. Originally this is how Paul had implemented the
logic in gitool and I had carried some of that over into git-gui, but
now that I'm getting ready to implement right mouse click features to
act on files I really should split this apart.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The concept of the Git index is confusing for many users, especially
those who are newer to Git.
Since git-gui is (at least partially) intended to be used by newer
users who don't need the complexity of the index to be put in front
of them early on, we should hide it by making any partially included
file fully included as soon as we identify it. To do this we just
run a quick update_index pass on any file which differs both in the
index and the working directory, as these files have already been
at least partially included by the user.
A new option has been added in the options dialog (gui.partialinclude)
which lets the user enable accessing the index from git-gui. This
just disables the automatic update_index pass on partially included
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
So although a text field with a flat relief looks like a label on
Windows it doesn't on Mac OS X. The Aqua version of Tk is still
drawing a border around the text field and that makes the diff pane
header look pretty ugly.
Earlier I had made the file name area into a text widget so the user
could highlight parts of it and copy them onto the clipboard; but with
the context menu being present this isn't quite as necessary as the user
can copy the file name to the clipboard using that instead. So although
this is a small loss in functionality for non-Mac OS X systems I think it
is still reasonable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Moved the Close button over to the lower right corner where our
Cancel/Save buttons are in the options dialog. This should fit
better with our own look and feel as well as that of most apps
on Mac OS X and Windows.
Also set the lower status bar in a console window to indicate the
process is working and that the user should wait for it to finish.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because the Tk pack layout manager gives all space to the right/bottom
most widget during expand/contract of the frame we were adding and
removing all space from the status area of the bar and not from the
file name, which is what we actually wanted.
A simple enough fix is to just put the status of the given file on
the left side of the diff viewer header rather than on the right.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When I changed from 'check in' to 'include' I missed the human friendly
status displayed in the right side of the diff viewer heading. It was
still reporting 'Checked in' for a fully included file, which is not
what we wanted it to say.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a lot of reasons why the user might need to obtain the
complete (or just part of) path of a file which they are currently
viewing in the diff viewer pane. So now we allow selection on this
widget by using a text widget instead of a label. We also offer a
context menu which has actions for copying the selection or the entire
value onto the clipboard.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
