The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jd/subtree:
contrib/subtree: allow adding an annotated tag
contrib/subtree/Makefile: clean up rule for "clean"
contrib/subtree/Makefile: clean up rules to generate documentation
contrib/subtree/Makefile: s/libexecdir/gitexecdir/
contrib/subtree/Makefile: use GIT-VERSION-FILE
contrib/subtree/Makefile: scrap unused $(gitdir)
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
Found by check-non-portable-shell.pl
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of showing a warning and working as before, fail and show
the message and force immediate upgrade from their upstream
repositories when these tools are run, per request from their
primary author.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tools are now maintained out-of-tree, and they have a regression
in v2.0. It's better to start warning the users as soon as possible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all shells subject the prompt string to parameter expansion. Test
whether the shell will expand the value of PS1, and use the result to
control whether raw ref names are included directly in PS1.
This fixes a regression introduced in commit 8976500 ("git-prompt.sh:
don't put unsanitized branch names in $PS1"): zsh does not expand PS1
by default, but that commit assumed it did. The bug resulted in
prompts containing the literal string '${__git_ps1_branch_name}'
instead of the actual branch name.
Reported-by: Caleb Thompson <caleb@calebthompson.io>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_add_commit() is passed FETCH_HEAD by cmd_add_repository, which
is then rev-parsed into an object name. However, if the user is
fetching a tag rather than a branch HEAD, such as by executing:
$ git subtree add -P oldGit https://github.com/git/git.git tags/v1.8.0
the object name refers to a tag and is never peeled, and the git
commit-tree call (line 561) slaps us in the face because it doesn't
peel tags to commits.
Because peeling a committish doesn't do anything if it's already a
commit, fix by peeling the object name before assigning it to $rev
using peel_committish() from git:git-sh-setup.sh, a pre-existing
dependency of git-subtree.
Reported-by: Kevin Cagle <kcagle@micron.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it might collide with a function of the same name in the
user's environment.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a large change, most of this was whitespace changes, though there
were a few places where I removed a comma or added a few characters.
Should pass through pep8 and pass every test.
Signed-off-by: William Giokas <1007380@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality of the "git diffall" script in contrib/ was
incorporated into "git difftool" when the --dir-diff option was added
in v1.7.11 (ca. June, 2012). Once difftool learned those features,
the diffall script became obsolete.
The only difference in behavior is that when comparing to the working
tree, difftool copies any files modified by the user back to the
working tree when the diff tool exits. "git diffall" required the
--copy-back option to do the same. All other diffall options have the
same meaning in difftool.
Make life easier for people choosing a tool to use by removing the old
diffall script. A pointer in the release notes should be enough to
help current users migrate.
Helped-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git support scripts started shipping in upstream vim in version
7.2 (2008-08-09). Clean up contrib/ a little by removing the
instructions for people on older versions of vim.
RHEL 6 already has vim 7.2.something, so anyone on a reasonably modern
operating system should not be affected. Users on RHEL 5 presumably
know that means sometimes missing out on niceties like syntax
highlighting, so this should be safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git:Documentation/Makefile and others establish "RM ?= rm -f" as a
convention for rm calls in clean rules, hence follow this convention
instead of simply forcing clean to use rm.
subproj and mainline no longer need to be removed in clean, as they are
no longer created in git:contrib/subtree by "make test". Hence, remove
the rm call for those folders.
Other makefiles don't remove "*~" files, remove the rm call to prevent
unexpected behaviour in the future. Similarly, clean doesn't remove the
installable file, so rectify this.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git:Documentation/Makefile establishes asciidoc/xmlto calls as being
handled through their appropriate variables, Hence, change to bring into
congruency with.
Similarly, MANPAGE_XSL exists in git:Documentation/Makefile, while
MANPAGE_NORMAL_XSL does not outside contrib/subtree. Hence, replace
MANPAGE_NORMAL_XSL with MANPAGE_XSL.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(libexecdir) isn't used anywhere else in the project, while
$(gitexecdir) is the standard in the other appropriate makefiles. Hence,
replace the former with the latter.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GVF is already being used in most/all other makefiles in the project,
and has been for _quite_ a while. Hence, drop file-unique gitver and
replace with GIT_VERSION.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7ff8463dba, the references to gitdir
were removed but the assignment itself wasn't. Hence, drop the gitdir
assignment.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a media file contains valid UTF-8, git-remote-mediawiki tried to be
too clever about the encoding, and the call to utf8::downgrade() on the
downloaded content was failing with
Wide character in subroutine entry at git-remote-mediawiki line 583.
Instead, use $response->decode() to apply decoding linked to the
Content-Encoding: header, and return the content without attempting any
charset decoding.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the user had to launch a complete re-install after a lighttpd
stop (e.g. a reboot).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both bash and zsh subject the value of PS1 to parameter expansion,
command substitution, and arithmetic expansion. Rather than include
the raw, unescaped branch name in PS1 when running in two- or
three-argument mode, construct PS1 to reference a variable that holds
the branch name. Because the shells do not recursively expand, this
avoids arbitrary code execution by specially-crafted branch names such
as '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)'.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
