The function takes two counted strings (<basename, basenamelen> and
<pattern, patternlen>) as parameters, together with prefix (the
length of the prefix in pattern that is to be matched literally
without globbing against the basename) and EXC_* flags that tells it
how to match the pattern against the basename.
However, it did not pay attention to the length of these counted
strings. Update them to do the following:
* When the entire pattern is to be matched literally, the pattern
matches the basename only when the lengths of them are the same,
and they match up to that length.
* When the pattern is "*" followed by a string to be matched
literally, make sure that the basenamelen is equal or longer than
the "literal" part of the pattern, and the tail of the basename
string matches that literal part.
* Otherwise, use the new fnmatch_icase_mem helper to make
sure we only lookmake sure we use only look at the
counted part of the strings. Because these counted strings are
full strings most of the time, we check for termination
to avoid unnecessary allocation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git status --ignored" did not work well when used with
"--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Output from "git status --ignored" showed an unexpected interaction
with "--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
When enumerating paths that are ignored, paths the index knows
about are not included in the result. The "index knows about"
check is done by consulting the name hash, not the actual
contents of the index:
- When core.ignorecase is false, directory names are not in the
name hash, and ignored ones are shown as ignored (directories
can never be tracked anyway).
- When core.ignorecase is true, however, the name hash keeps
track of the names of directories, in order to detect
additions of the paths under different cases. This causes
ignored directories to be mistakenly excluded when
enumerating ignored paths.
Stop excluding directories that are in the name hash when
looking for ignored files in dir_add_name(); the names that are
actually in the index are excluded much earlier in the callchain
in treat_file(), so this fix will not make them mistakenly
identified as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a grammatical issue in the description of these functions, and
make it more obvious how and why seen[] can be reused across multiple
invocations.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).
For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1. So for example the 2nd pattern provided via
--exclude would be numbered -2. This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
The current behavior of git-status is inconsistent and misleading.
Especially when used with --untracked-files=all option:
- files ignored in untracked directories will be missing from
status output.
- untracked files in committed yet ignored directories are also
missing.
- with --untracked-files=normal, untracked directories that
contains only ignored files are dropped too.
Make the behavior more consistent across all possible use cases:
- "--ignored --untracked-files=normal" doesn't show each specific
files but top directory. It instead shows untracked directories
that only contains ignored files, and ignored tracked directories
with untracked files.
- "--ignored --untracked-files=all" shows all ignored files, either
because it's in an ignored directory (tracked or untracked), or
because the file is explicitly ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, wildmatch() has always honoured directory boundary and there
was no way to turn it off. Make it behave more like fnmatch() by
requiring all callers that want the FNM_PATHNAME behaviour to pass
that in the equivalent flag WM_PATHNAME. Callers that do not specify
WM_PATHNAME will get wildcards like ? and * in their patterns matched
against '/', just like not passing FNM_PATHNAME to fnmatch().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- All exported constants now have a prefix WM_
- Do not rely on FNM_* constants, use the WM_ counterparts
- Remove TRUE and FALSE to follow Git's coding style
- While at it, turn flags type from int to unsigned int
- Add an (unused yet) argument to carry extra information
so that we don't have to change the prototype again later
when we need to pass other stuff to wildmatch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.
http://article.gmane.org/gmane.comp.version-control.git/206128
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching_path() which return the last
exclude_list element which matched, or NULL if no match was found.
is_path_excluded() becomes a wrapper around this, and just returns 0
or 1 depending on whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching() which returns the last exclude_list
element which matched, or NULL if no match was found. is_excluded()
becomes a wrapper around this, and just returns 0 or 1 depending on
whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The excluded function uses a new helper function called
last_exclude_matching_from_list() to perform the inner loop over all of
the exclude patterns. The helper just tells us whether the path is
included, excluded, or undecided.
However, it may be useful to know _which_ pattern was triggered. So
let's pass out the entire exclude match, which contains the status
information we were already passing out.
Further patches can make use of this.
This is a modified forward port of a patch from 2009 by Jeff King:
http://article.gmane.org/gmane.comp.version-control.git/108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue adopting clearer names for exclude functions. This is_*
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Also adjust their callers as necessary.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was agreed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'el' is only *slightly* less cryptic, but is already used as the
variable name for a struct exclude_list pointer in numerous other
places, so this reduces the number of cryptic variable names in use by
one :-)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
traversal API has a few potentially confusing properties. These
comments clarify a few key aspects and will hopefully make it easier
to understand for other newcomers in the future.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a pattern contains only a single asterisk as wildcard,
e.g. "foo*bar", after literally comparing the leading part "foo" with
the string, we can compare the tail of the string and make sure it
matches "bar", instead of running fnmatch() on "*bar" against the
remainder of the string.
-O2 build on linux-2.6, without the patch:
$ time git rev-list --quiet HEAD -- '*.c'
real 0m40.770s
user 0m40.290s
sys 0m0.256s
With the patch
$ time ~/w/git/git rev-list --quiet HEAD -- '*.c'
real 0m34.288s
user 0m33.997s
sys 0m0.205s
The above command is not supposed to be widely popular. It's chosen
because it exercises pathspec matching a lot. The point is it cuts
down matching time for popular patterns like *.c, which could be used
as pathspec in other places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mark pathspec with wildcards with the field use_wildcard. We
could do better by saving the length of the non-wildcard part, which
can be used for optimizations such as f9f6e2c (exclude: do strcmp as
much as possible before fnmatch - 2012-06-07).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start laying the foundation to build the "wildmatch" after we can
agree on its desired semantics.
* nd/attr-match-optim-more:
attr: more matching optimizations from .gitignore
gitignore: make pattern parsing code a separate function
exclude: split pathname matching code into a separate function
exclude: fix a bug in prefix compare optimization
exclude: split basename matching code into a separate function
exclude: stricten a length check in EXC_FLAG_ENDSWITH case
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can later be reused by attr.c. Also turn to_exclude
field into a flag.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.
Don't be too optimistic and let fnmatch() do the job.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This block of code deals with the "basename" part only, which has the
length of "pathlen - (basename - pathname)". Stricten the length check
and remove "pathname" from the main expression to avoid confusion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'f9f6e2c':
exclude: do strcmp as much as possible before fnmatch
dir.c: get rid of the wildcard symbol set in no_wildcard()
Unindent excluded_from_list()
The previous series introduced warnings to multiple places, but it
could become tiring to see the warning on the same path over and
over again during a single run of Git. Making just one function
responsible for issuing this warning, we could later choose to keep
track of which paths we issued a warning (it would involve a hash
table of paths after running them through real_path() or something)
in order to reduce noise.
Right now we do not know if the noise reduction is necessary, but it
still would be a good code reduction/sharing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to access gitignore files, we check for their
existence with a call to "access". We silently ignore
missing files. However, if a file is not readable, this may
be a configuration error; let's warn the user.
For $GIT_DIR/info/excludes or core.excludesfile, we can just
use access_or_warn. However, for per-directory files we
actually try to open them, so we must add a custom warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t -i" did not consider anything under t/ as
excluded, as it did not pay attention to exclusion of leading paths
while walking the index. Other two users of excluded() are also
updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
Attempt to optimize matching with an exclude pattern with a deep
directory hierarchy by taking the part that specifies leading path
without wildcard literally.
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t -i" did not consider anything under t/
as excluded, as it did not pay attention to exclusion of leading
paths while walking the index. Other two users of excluded() are
also updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
this also avoids calling fnmatch() if the non-wildcard prefix is
longer than basename
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elsewhere in this file is_glob_special() is also used to check for
wildcards, which is defined in ctype. Make no_wildcard() also use this
function (indirectly via simple_length())
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was stupid of me to make the API too much cache-entry specific;
the caller may want to check arbitrary pathname without having a
corresponding cache-entry to see if a path is ignored.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we know a caller that does not recurse is calling us in the index
order, we can remember the last directory we found to be excluded
and see if the path we are looking at is still inside it, in which
case we can just answer that it is excluded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t/ -i" does not show paths in directory t/
that have been added to the index, but it should.
The excluded() API was designed for callers who walk the tree from
the top, checking each level of the directory hierarchy as it
descends if it is excluded, and not even bothering to recurse into
an excluded directory. This would allow us optimize for a common
case by not having to check if the exclude pattern "foo/" matches
when looking at "foo/bar", because the caller should have noticed
that "foo" is excluded and did not even bother to read "foo/bar"
out of opendir()/readdir() to call it.
The code for "ls-files -i" however walks the index linearly, feeding
paths without checking if the leading directory is already excluded.
Introduce a helper function path_excluded() to let this caller
properly call excluded() check for higher hierarchies as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return early if el->nr == 0. Unindent one more level for FNM_PATHNAME
code block as this block is getting complex and may need more
indentation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that read_directory_recursive() (reached through read_directory())
respects the string length limit we provide, we don't need to create a
NUL-limited copy of the common prefix anymore.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A directory name is passed to read_directory_recursive() as a
length-limited string, through the parameters base and baselen.
Suprisingly, base must be a NUL-terminated string as well, as it is
passed to opendir(), ignoring baselen.
Fix this by postponing the call to opendir() until the length-limted
string is added to a strbuf, which provides a NUL in the right place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions read_directory_recursive() and treat_leading_path() both
use buffers sized to fit PATH_MAX characters. The latter can be made to
overrun its buffer, e.g. like this:
$ a=0123456789abcdef
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ git add $a/a
Instead of trying to add a check and potentionally forgetting to address
similar cases, convert the involved functions and their helpers to use
struct strbuf. The patch is suprisingly large because the helpers
treat_path() and treat_one_path() modify the buffer as well and thus need
to be converted, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_dir_recursively() has a check to avoid removing the directory it
was asked to remove without recursing into it and report success when the
directory is the top level of a working tree of a nested git repository,
to protect such a repository from "clean -f" (without double -f). If a
working tree of a nested git repository is in a subdirectory of a toplevel
project, however, this protection did not apply by mistake; we forgot to
pass the REMOVE_DIR_KEEP_NESTED_GIT down to the recursive removal
codepath.
This requires us to also teach the higher level not to remove the
directory it is asked to remove, when the recursed invocation did not
remove the directory it was asked to remove due to a nested git
repository, as it is not an error to leave the parent directories of such
a nested repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the REMOVE_DIR_KEEP_TOPLEVEL flag to remove_dir_recursively() for
deleting everything inside the given directory, but _not_ the given
directory itself.
Note that this does not pass the REMOVE_DIR_KEEP_NESTED_GIT flag, if set,
to the recursive invocations of remove_dir_recursively(). It is likely to
be a a bug that has been present since REMOVE_DIR_KEEP_NESTED_GIT was
introduced (a0f4afb), but this commit keeps the same behaviour for now.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation from pathspec_prefix (slightly modified) replaces the
current common_prefix, because it also respects glob characters.
Based on a patch by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a last ditch effort, try rmdir(2) when we cannot read the directory
to be removed. It may be an empty directory that we can remove without
any permission, as long as we can modify its parent directory.
Noticed by Linus.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function dir_inside_of() does something similar (correctly), but looks
easier to understand and does not bundle cwd to its business. Given
get_relative_cwd's only user is is_inside_dir, we can kill it for
good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same old problem reappears after setup code is reworked. We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.
In long term, match_pathspec() and match_one() should be removed in
favor of this function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.
This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to replace pathspec_matches() in builtin/grep.c.
max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].
raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/maint-fix-add-typo-detection:
Revert "excluded_1(): support exclude files in index"
unpack-trees: fix sparse checkout's "unable to match directories"
unpack-trees: move all skip-worktree checks back to unpack_trees()
dir.c: add free_excludes()
cache.h: realign and use (1 << x) form for CE_* constants
* jj/icase-directory:
Support case folding in git fast-import when core.ignorecase=true
Support case folding for git add when core.ignorecase=true
Add case insensitivity support when using git ls-files
Add case insensitivity support for directories when using git status
Case insensitivity support for .gitignore via core.ignorecase
Add string comparison functions that respect the ignore_case variable.
Makefile & configure: add a NO_FNMATCH_CASEFOLD flag
Makefile & configure: add a NO_FNMATCH flag
Conflicts:
Makefile
config.mak.in
configure.ac
fast-import.c
This reverts commit c84de70781.
The commit provided a workaround for matching directories in
index. But it is no longer needed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 490544b (get_cwd_relative(): do not misinterpret suffix as
subdirectory) handles case where:
dir = "/path/work";
cwd = "/path/work-xyz";
When it comes to the end of get_cwd_relative(), dir is at '\0' and cwd
is at '-'. The rest of cwd, "-xyz", clearly cannot be the relative
path from dir to cwd. However there is another case where:
dir = "/"; /* or even "c:/" */
cwd = "/path/to/here";
In this special case, while *cwd == 'p', which is not a path
separator, the rest of cwd, "path/to/here", can be returned as a
relative path from dir to cwd.
Handle this case and make t1509 pass again.
Reported-by: Albert Strasheim <fullung@gmail.com>
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mydir/filea.txt is added, mydir/ is renamed to MyDir/, and
MyDir/fileb.txt is added, running git ls-files mydir only shows
mydir/filea.txt. Running git ls-files MyDir shows MyDir/fileb.txt.
Running git ls-files mYdIR shows nothing.
With this patch running git ls-files for mydir, MyDir, and mYdIR shows
mydir/filea.txt and MyDir/fileb.txt.
Wildcards are not handled case insensitively in this patch. Example:
MyDir/aBc/file.txt is added. git ls-files MyDir/a* works fine, but git
ls-files mydir/a* does not.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a case preserving but case insensitive file system, directory
case can differ but still refer to the same physical directory. git
status reports the directory with the alternate case as an Untracked
file. (That is, when mydir/filea.txt is added to the repository and
then the directory on disk is renamed from mydir/ to MyDir/, git status
shows MyDir/ as being untracked.)
Support has been added in name-hash.c for hashing directories with a
terminating slash into the name hash. When index_name_exists() is called
with a directory (a name with a terminating slash), the name is not
found via the normal cache_name_compare() call, but it is found in the
slow_same_name() function.
Additionally, in dir.c, directory_exists_in_index_icase() allows newly
added directories deeper in the directory chain to be identified.
Ultimately, it would be better if the file list was read in case
insensitive alphabetical order from disk, but this change seems to
suffice for now.
The end result is the directory is looked up in a case insensitive
manner and does not show in the Untracked files list.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is especially beneficial when using Windows and Perforce and the
git-p4 bridge. Internally, Perforce preserves a given file's full path
including its case at the time it was added to the Perforce repository.
When syncing a file down via Perforce, missing directories are created,
if necessary, using the case as stored with the filename. Unfortunately,
two files in the same directory can have differing cases for their
respective paths, such as /diRa/file1.c and /DirA/file2.c. Depending on
sync order, DirA/ may get created instead of diRa/.
It is possible to handle directory names in a case insensitive manner
without this patch, but it is highly inconvenient, requiring each
character to be specified like so: [Bb][Uu][Ii][Ll][Dd]. With this patch, the
gitignore exclusions honor the core.ignorecase=true configuration
setting and make the process less error prone. The above is specified
like so: Build
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple locations within this patch series alter a case sensitive
string comparison call such as strcmp() to be a call to a string
comparison call that selects case comparison based on the global
ignore_case variable. Behaviorally, when core.ignorecase=false, the
*_icase() versions are functionally equivalent to their C runtime
counterparts. When core.ignorecase=true, the *_icase() versions perform
a case insensitive comparison.
Like Linus' earlier ignorecase patch, these may ignore filename
conventions on certain file systems. By isolating filename comparisons
to certain functions, support for those filename conventions may be more
easily met.
Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 4.4.4 on MacOS incorrectly warns about potential use of uninitialized memory.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
common_prefix() scans backwards from the far end of each 'next'
pathspec, starting from 'len', shortening the 'prefix' using 'path' as
a reference.
However, there is a small opportunity for an out-of-bounds access
because len is unconditionally set to prefix-1 after a "direct match"
test failed. This means that if 'next' is shorter than prefix+2, we
read past it.
Instead of a minimal fix, simplify the loop: scan *forward* over the
'next' entry, remembering the last '/' where it matched the prefix
known so far. This is far easier to read and also has the advantage
that we only scan over each entry once.
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-add-ignored-dir:
tests for "git add ignored-dir/file" without -f
dir: fix COLLECT_IGNORED on excluded prefixes
t0050: mark non-working test as such
As we walk the directory tree, if we see an ignored path, we
want to add it to the ignored list only if it matches any
pathspec that we were given. We used to check for the
pathspec to appear explicitly. E.g., if we see "subdir/file"
and it is excluded, we check to see if we have "subdir/file"
in our pathspec.
However, this interacts badly with the optimization to avoid
recursing into ignored subdirectories. If "subdir" as a
whole is ignored, then we never recurse, and consider only
whether "subdir" itself is in our pathspec. It would not
match a pathspec of "subdir/file" explicitly, even though it
is the reason that subdir/file would be excluded.
This manifests itself to the user as "git add subdir/file"
failing to correctly note that the pathspec was ignored.
This patch extends the in_pathspec logic to include prefix
directory case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b5041c5 (Avoid writing to buffer in add_excludes_from_file_1())
tried not to append '\n' at the end because the next commit
may return a buffer that does not have extra space for that.
Unfortunately it left this assignment in the loop:
buf[i - (i && buf[i-1] == '\r')] = 0;
that can corrupt memory if "buf" is not '\n' terminated. But even if
it does not corrupt memory, the last line would not be
NULL-terminated, leading to errors later inside add_exclude().
This patch fixes it by reverting the faulty commit and make
sure "buf" is always \n terminated.
While at it, free unused memory properly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/ls-files-ignored-pathspec:
ls-files: fix overeager pathspec optimization
read_directory(): further split treat_path()
read_directory_recursive(): refactor handling of a single path into a separate function
t3001: test ls-files -o ignored/dir
