"git -c branch.autosetupmerge=simple branch $A $B" will set the $B
as $A's upstream only when $A and $B shares the same name, and "git
-c push.default=simple" on branch $A would push to update the
branch $A at the remote $B came from. Also more places use the
sole remote, if exists, before defaulting to 'origin'.
* tk/simple-autosetupmerge:
push: new config option "push.autoSetupRemote" supports "simple" push
push: default to single remote even when not named origin
branch: new autosetupmerge option 'simple' for matching branches
"git fetch --recurse-submodules" from multiple remotes (either from
a remote group, or "--all") used to make one extra "git fetch" in
the submodules, which has been corrected.
* jc/avoid-redundant-submodule-fetch:
fetch: do not run a redundant fetch from submodule
The way "git fetch" without "--update-head-ok" ensures that HEAD in
no worktree points at any ref being updated was too wasteful, which
has been optimized a bit.
* os/fetch-check-not-current-branch:
fetch: limit shared symref check only for local branches
Documentation update.
* pb/ggg-in-mfc-doc:
MyFirstContribution: drop PR description for GGG single-patch contributions
MyFirstContribution: reference "The cover letter" in GitGitGadget section
MyFirstContribution: reference "The cover letter" in "Preparing Email"
MyFirstContribution: add standalone section on cover letter
MyFirstContribution: add "Anatomy of a Patch Series" section
"git fetch" unnecessarily failed when an unexpected optional
section appeared in the output, which has been corrected.
* jt/fetch-peek-optional-section:
fetch-pack: make unexpected peek result non-fatal
The "--current" option of "git show-branch" should have been made
incompatible with the "--reflog" mode, but this was not enforced,
which has been corrected.
* jc/show-branch-g-current:
show-branch: -g and --current are incompatible
"make coverage-report" without first running "make coverage" did
not produce any meaningful result, which has been corrected.
* ep/coverage-report-wants-test-to-have-run:
Makefile: add a prerequisite to the coverage-report target
"git archive --add-file=<path>" picked up the raw permission bits
from the path and propagated to zip output in some cases, without
normalization, which has been corrected (tar output did not have
this issue).
* jc/archive-add-file-normalize-mode:
archive: do not let on-disk mode leak to zip archives
A bit of test framework fixes with a few fixes to issues found by
valgrind.
* ab/valgrind-fixes:
commit-graph.c: don't assume that stat() succeeds
object-file: fix a unpack_loose_header() regression in 3b6a8db3b0
log test: skip a failing mkstemp() test under valgrind
tests: using custom GIT_EXEC_PATH breaks --valgrind tests
macOS CI jobs have been occasionally flaky due to tentative version
skew between perforce and the homebrew packager. Instead of
failing the whole CI job, just let it skip the p4 tests when this
happens.
* cb/ci-make-p4-optional:
ci: use https, not http to download binaries from perforce.com
ci: reintroduce prevention from perforce being quarantined in macOS
ci: avoid brew for installing perforce
ci: make failure to find perforce more user friendly
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
"git show :<path>" learned to work better with the sparse-index
feature.
* ds/sparse-colon-path:
rev-parse: integrate with sparse index
object-name: diagnose trees in index properly
object-name: reject trees found in the index
show: integrate with the sparse index
t1092: add compatibility tests for 'git show'
Teach "git stash" to work better with sparse index entries.
* vd/sparse-stash:
unpack-trees: preserve index sparsity
stash: apply stash using 'merge_ort_nonrecursive()'
read-cache: set sparsity when index is new
sparse-index: expose 'is_sparse_index_allowed()'
stash: integrate with sparse index
stash: expand sparse-checkout compatibility testing
"git bisect" was too silent before it is ready to start computing
the actual bisection, which has been corrected.
* cd/bisect-messages-from-pre-flight-states:
bisect: output bisect setup status in bisect log
bisect: output state before we are ready to compute bisection
"git pull" without "--recurse-submodules=<arg>" made
submodule.recurse take precedence over fetch.recurseSubmodules by
mistake, which has been corrected.
* gc/pull-recurse-submodules:
pull: do not let submodule.recurse override fetch.recurseSubmodules
Trace2 documentation updates.
* js/trace2-doc-fixes:
trace2 docs: add missing full stop
trace2 docs: clarify what `varargs` is all about
trace2 docs: fix a JSON formatted example
trace2 docs: surround more terms in backticks
trace2 docs: "printf" is not an English word
trace2 docs: a couple of grammar fixes
"git log --since=X" will stop traversal upon seeing a commit that
is older than X, but there may be commits behind it that is younger
than X when the commit was created with a faulty clock. A new
option is added to keep digging without stopping, and instead
filter out commits with timestamp older than X.
* mv/log-since-as-filter:
log: "--since-as-filter" option is a non-terminating "--since" variant
The temporary files fed to external diff command are now generated
inside a new temporary directory under the same basename.
* rs/external-diff-tempfile:
diff: use mks_tempfile_dt()
tempfile: add mks_tempfile_dt()
New tests for the safe.directory mechanism.
* sg/safe-directory-tests-and-docs:
safe.directory: document and check that it's ignored in the environment
t0033-safe-directory: check when 'safe.directory' is ignored
t0033-safe-directory: check the error message without matching the trash dir
In c7c4bdeccf (run-command API: remove "env" member, always use
"env_array", 2021-11-25), there was a push to replace
cld.env = env->v;
with
strvec_pushv(&cld.env_array, env->v);
The conversion in c7c4bdeccf was mostly plug-and-play, with the snag
that some instances of strvec_pushv() became guarded with a NULL check
to ensure that the second argument was non-NULL.
This conversion was slightly over-eager to add a conditional in
builtin/receive-pack.c::unpack(), since we know at the point that we
add the result of `tmp_objdir_env()` into the child process's
environment, that `tmp_objdir` is non-NULL.
This follows from the conditional just before our strvec_pushv() call
(which returns from the function if `tmp_objdir` was NULL), as well as
the call to tmp_objdir_add_as_alternate() just below, which relies on
its argument (`tmp_objdir`) being non-NULL.
In the meantime, this extra conditional isn't hurting anything. But it
is redundant and thus unnecessarily confusing. So let's remove it.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 7dce19d3 (fetch/pull: Add the --recurse-submodules option,
2010-11-12) introduced the "--recurse-submodule" option, the
approach taken was to perform fetches in submodules only once, after
all the main fetching (it may usually be a fetch from a single
remote, but it could be fetching from a group of remotes using
fetch_multiple()) succeeded. Later we added "--all" to fetch from
all defined remotes, which complicated things even more.
If your project has a submodule, and you try to run "git fetch
--recurse-submodule --all", you'd see a fetch for the top-level,
which invokes another fetch for the submodule, followed by another
fetch for the same submodule. All but the last fetch for the
submodule come from a "git fetch --recurse-submodules" subprocess
that is spawned via the fetch_multiple() interface for the remotes,
and the last fetch comes from the code at the end.
Because recursive fetching from submodules is done in each fetch for
the top-level in fetch_multiple(), the last fetch in the submodule
is redundant. It only matters when fetch_one() interacts with a
single remote at the top-level.
While we are at it, there is one optimization that exists in dealing
with a group of remote, but is missing when "--all" is used. In the
former, when the group turns out to be a group of one, instead of
spawning "git fetch" as a subprocess via the fetch_multiple()
interface, we use the normal fetch_one() code path. Do the same
when handing "--all", if it turns out that we have only one remote
defined.
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This check was introduced in 8ee5d73137 (Fix fetch/pull when run without
--update-head-ok, 2008-10-13) in order to protect against replacing the ref
of the active branch by mistake, for example by running git fetch origin
master:master.
It was later extended in 8bc1f39f41 (fetch: protect branches checked out
in all worktrees, 2021-12-01) to scan all worktrees.
This operation is very expensive (takes about 30s in my repository) when
there are many tags or branches, and it is executed on every fetch, even if
no local heads are updated at all.
Limit it to protect only refs/heads/* to improve fetch performance.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a Git server responds to a fetch request, it may send optional
sections before the packfile section. To handle this, the Git client
calls packet_reader_peek() (see process_section_header()) in order to
see what's next without consuming the line.
However, as implemented, Git errors out whenever what's peeked is not an
ordinary line. This is not only unexpected (here, we only need to know
whether the upcoming line is the section header we want) but causes
errors to include the name of a section header that is irrelevant to the
cause of the error. For example, at $DAYJOB, we have seen "fatal: error
reading section header 'shallow-info'" error messages when none of the
repositories involved are shallow.
Therefore, fix this so that the peek returns 1 if the upcoming line is
the wanted section header and nothing else. Because of this change,
reader->line may now be NULL later in the function, so update the error
message printing code accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, GitHub prefills the PR description using the commit message
for single-commit PRs. This results in a duplicate commit message below
the three-dash line if the contributor does not empty out the PR
description before submitting, which adds noise for reviewers.
Add a note to that effect in MyFirstContribution.txt.
This partly addresses:
https://github.com/gitgitgadget/gitgitgadget/issues/340
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Sending Patches via GitGitGadget" section mentions that the PR
title and description will be used as the cover letter, but does not
explain what is a cover letter or what should be included in it.
Refer readers to the new "The cover letter" section added in a previous
commit.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added a standalone section on the purpose of the
cover letter, drawing inspiration from the existing content of the
"Preparing Email" section.
Adjust "Preparing Email" to reference "The cover letter", to avoid
content duplication.
Also, use the imperative mode for the cover letter subject, as is done
in "The cover letter".
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An explanation of the purpose of the cover letter is included in the
"Sending Patches with git send-email" / "Preparing Email" section but is
missing from the "Sending Patches via GitGitGadget" section.
Add a standalone section "The cover letter" under the "Getting Started:
Anatomy of a Patch Series" header to explain what the cover letter is
used for and to draft the cover letter of the 'psuh' topic used in the
tutorial.
For now we mostly copy content from the "Sending Patches with git
send-email" section but do not adjust that section, nor the GGG section,
to reference the new section. This is done in following commits.
Also, adjust the "Preparing Email" Asciidoc anchor to avoid conflicts.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before describing how to send patches to the mailing list either with
GitGitGadget or 'git send-email', the MyFirstContribution tutorial
includes a small "Getting Ready to Share" section where the two
different methods are briefly introduced.
Use this section to also describe what a patch series looks like once
submitted, so that readers get an understanding of the end result before
diving into how to accomplish that end result.
Start by copying the "thread overview" section of a recent contribution
from the public-inbox web UI and explaining how each commit is a
separate mail, and point out the cover letter.
Subsequent commits will move the existing description of the purpose of
the cover letter from the 'git send-email' section to this "anatomy"
section.
Also, change the wording in the introductory paragraph to use
"contributions" instead of "patches", since this makes more sense when
talking about GitHub pull requests.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
