This logic was introduced by 5325591 (worktree: copy sparse-checkout
patterns and config on add, 2022-02-07), but some feedback came in that
the add_worktree() method was already too complex. It is better to
extract this logic into a helper method to reduce this complexity.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two messages differ only by the config key name, which should not
be translated. Extract those keys so the messages can be translated from
the same string.
Reported-by: Jean-Noël AVILA <jn.avila@free.fr>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In sparse-checkout add/set under cone mode, the arguments passed are
supposed to be directories rather than gitignore-style patterns.
However, given the amount of effort spent in the manual discussing
patterns, it is easy for users to assume they need to pass patterns such
as
/foo/*
or
!/bar/*/
or perhaps they really do ignore the directory rule and specify a
random gitignore-style pattern like
*.c
To help catch such mistakes, throw an error if any of the positional
arguments:
* starts with any of '/!'
* contains any of '*?[]'
Inform users they can pass --skip-checks if they have a directory that
really does have such special characters in its name. (We exclude '\'
because of sparse-checkout's special handling of backslashes; see
the MINGW test in t1091.46.)
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set and add subcommands accept multiple positional arguments.
The meaning of these arguments differs slightly in the two modes:
Cone mode only accepts directories. If given a file, it would
previously treat it as a directory, causing not just the file itself to
be included but all sibling files as well -- likely against users'
expectations. Throw an error if the specified path is a file in the
index. Provide a --skip-checks argument to allow users to override
(e.g. for the case when the given path IS a directory on another
branch).
Non-cone mode accepts general gitignore patterns. There are many
reasons to avoid this mode, but one possible reason to use it instead of
cone mode: to be able to select individual files within a directory.
However, if a file is passed to set/add in non-cone mode, you won't be
selecting a single file, you'll be selecting a file with the same name
in any directory. Thus users will likely want to prefix any paths they
specify with a leading '/' character; warn users if the patterns they
specify exactly name a file because it means they are likely missing
such a leading slash.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, non-option arguments to set & add are clearly paths, and
as such, we should pay attention to prefix.
In non-cone mode, it is not clear that folks intend to provide paths
since the inputs are gitignore-style patterns. Paying attention to
prefix would prevent folks from doing things like
git sparse-checkout add /.gitattributes
git sparse-checkout add '/toplevel-dir/*'
In fact, the former will result in
fatal: '/.gitattributes' is outside repository...
while the later will result in
fatal: Invalid path '/toplevel-dir': No such file or directory
despite the fact that both are valid gitignore-style patterns that would
select real files if added to the sparse-checkout file. This might lead
people to just use the path without the leading slash, potentially
resulting in them grabbing files with the same name throughout the
directory hierarchy contrary to their expectations. See also [1] and
[2]. Adding prefix seems to just be fraught with error; so for now
simply throw an error in non-cone mode when sparse-checkout set/add are
run from a subdirectory.
[1] https://lore.kernel.org/git/e1934710-e228-adc4-d37c-f706883bd27c@gmail.com/
[2] https://lore.kernel.org/git/CABPp-BHXZ-XLxY0a3wCATfdq=6-EjW62RzbxKAoFPeXfJswD2w@mail.gmail.com/
Helped-by: Junio Hamano <gitster@pobox.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit f2e3a218e8 ("sparse-checkout: enable `set` to initialize
sparse-checkout mode", 2021-12-14) made the `set` command able to
initialize sparse-checkout mode, but it also had to function when
sparse-checkout mode was already setup and the user just wanted to
change the sparsity paths. So, if the user passed --cone or --no-cone,
then we should override the current setting, but if they didn't pass
either, we should use whatever the current cone mode setting is.
Unfortunately, there was a small error in the logic in that it would not
set the in-memory cone mode value (core_sparse_checkout_one) when
--no-cone was specified, but since it did set the config setting on
disk, any subsequent git invocation would correctly get non-cone mode.
As such, the error did not previously matter. However, a subsequent
commit will add some logic that depends on core_sparse_checkout_cone
being set to the correct mode, so make sure it is set consistently with
the config values we will be writing to disk.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4e256731d6 ("sparse-checkout: enable reapply to take
--[no-]{cone,sparse-index}", 2021-12-14) made it so that reapply could
take additional options but added no tests. Tests would have shown that
the feature doesn't work because the initial values are set AFTER
parsing the command line options instead of before. Add a test and set
the initial value at the appropriate time.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
Add a new flag --batch-command that accepts commands and arguments
from stdin, similar to git-update-ref --stdin.
At GitLab, we use a pair of long running cat-file processes when
accessing object content. One for iterating over object metadata with
--batch-check, and the other to grab object contents with --batch.
However, if we had --batch-command, we wouldn't need to keep both
processes around, and instead just have one --batch-command process
where we can flip between getting object info, and getting object
contents. Since we have a pair of cat-file processes per repository,
this means we can get rid of roughly half of long lived git cat-file
processes. Given there are many repositories being accessed at any given
time, this can lead to huge savings.
git cat-file --batch-command
will enter an interactive command mode whereby the user can enter in
commands and their arguments that get queued in memory:
<command1> [arg1] [arg2] LF
<command2> [arg1] [arg2] LF
When --buffer mode is used, commands will be queued in memory until a
flush command is issued that execute them:
flush LF
The reason for a flush command is that when a consumer process (A)
talks to a git cat-file process (B) and interactively writes to and
reads from it in --buffer mode, (A) needs to be able to control when
the buffer is flushed to stdout.
Currently, from (A)'s perspective, the only way is to either
1. kill (B)'s process
2. send an invalid object to stdin.
1. is not ideal from a performance perspective as it will require
spawning a new cat-file process each time, and 2. is hacky and not a
good long term solution.
With this mechanism of queueing up commands and letting (A) issue a
flush command, process (A) can control when the buffer is flushed and
can guarantee it will receive all of the output when in --buffer mode.
--batch-command also will not allow (B) to flush to stdout until a flush
is received.
This patch adds the basic structure for adding command which can be
extended in the future to add more commands. It also adds the following
two commands (on top of the flush command):
contents <object> LF
info <object> LF
The contents command takes an <object> argument and prints out the object
contents.
The info command takes an <object> argument and prints out the object
metadata.
These can be used in the following way with --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
flush LF
info <object> LF
flush LF
When used without --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
info <object> LF
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch introduces a new --batch-command flag. Including --batch
and --batch-check, we will have a total of three batch modes. print_contents
is the only boolean on the batch_options sturct used to distinguish
between the different modes. This makes the code harder to read.
To reduce potential confusion, replace print_contents with an enum to
help readability and clarity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will add an enum on the batch_options struct that
indicates which type of batch operation will be used: --batch,
--batch-check and the soon to be --batch-command that will read
commands from stdin. --batch-command mode might get confused with
the cmdmode flag.
There is value in renaming cmdmode in any case. cmdmode refers to how
the result output of the blob will be transformed, either according to
--filter or --textconv. So transform_mode is a more descriptive name
for the flag.
Rename cmdmode to transform_mode in cat-file.c
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
When fetching with the `--prune` flag we will delete any local
references matching the fetch refspec which have disappeared on the
remote. This step is not currently covered by the `--atomic` flag: we
delete branches even though updating of local references has failed,
which means that the fetch is not an all-or-nothing operation.
Fix this bug by passing in the global transaction into `prune_refs()`:
if one is given, then we'll only queue up deletions and not commit them
right away.
This change also improves performance when pruning many branches in a
repository with a big packed-refs file: every references is pruned in
its own transaction, which means that we potentially have to rewrite
the packed-refs files for every single reference we're about to prune.
The following benchmark demonstrates this: it performs a pruning fetch
from a repository with a single reference into a repository with 100k
references, which causes us to prune all but one reference. This is of
course a very artificial setup, but serves to demonstrate the impact of
only having to write the packed-refs file once:
Benchmark 1: git fetch --prune --atomic +refs/*:refs/* (HEAD~)
Time (mean ± σ): 2.366 s ± 0.021 s [User: 0.858 s, System: 1.508 s]
Range (min … max): 2.328 s … 2.407 s 10 runs
Benchmark 2: git fetch --prune --atomic +refs/*:refs/* (HEAD)
Time (mean ± σ): 1.369 s ± 0.017 s [User: 0.715 s, System: 0.641 s]
Range (min … max): 1.346 s … 1.400 s 10 runs
Summary
'git fetch --prune --atomic +refs/*:refs/* (HEAD)' ran
1.73 ± 0.03 times faster than 'git fetch --prune --atomic +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching references from a remote we by default also fetch all tags
which point into the history we have fetched. This is a separate step
performed after updating local references because it requires us to walk
over the history on the client-side to determine whether the remote has
announced any tags which point to one of the fetched commits.
This backfilling of tags isn't covered by the `--atomic` flag: right
now, it only applies to the step where we update our local references.
This is an oversight at the time the flag was introduced: its purpose is
to either update all references or none, but right now we happily update
local references even in the case where backfilling failed.
Fix this by pulling up creation of the reference transaction such that
we can pass the same transaction to both the code which updates local
references and to the code which backfills tags. This allows us to only
commit the transaction in case both actions succeed.
Note that we also have to start passing the transaction into
`find_non_local_tags()`: this function is responsible for finding all
tags which we need to backfill. Right now, it will happily return tags
which have already been updated with our local references. But when we
use a single transaction for both local references and backfilling then
it may happen that we try to queue the same reference update twice to
the transaction, which consequently triggers a bug. We thus have to skip
over any tags which have already been queued.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the backfilling of tags fails we do not report this error to the
caller, but only report it implicitly at a later point when reporting
updated references. This leaves callers unable to act upon the
information of whether the backfilling succeeded or not.
Refactor the function to return an error code and pass it up the
callstack. This causes us to correctly propagate the error back to the
user of git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different locations where we're appending to FETCH_HEAD:
first when storing updated references, and second when backfilling tags.
Both times we open the file, append to it and then commit it into place,
which is essentially duplicate work.
Improve the lifecycle of updating FETCH_HEAD by opening and committing
it once in `do_fetch()`, where we pass the structure down to the code
which wants to append to it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch code flow is a bit hard to understand right now:
1. We optionally prune all references which have vanished on the
remote side.
2. We fetch and update all other references locally.
3. We update the upstream branch in the gitconfig.
4. We backfill tags pointing into the history we have just fetched.
It is quite confusing that we fetch objects and update references in
both (2) and (4), which is further stressed by the point that we use a
`skip` goto label to jump from (3) to (4) in case we fail to update the
gitconfig as expected.
Reorder the code to first update all local references, and only after we
have done so update the upstream branch information. This improves the
code flow and furthermore makes it easier to refactor the way we update
references together.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dc (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d7 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declaration of the date.c functions from cache.h, and adjust
the relevant users to include the new date.h header.
The show_ident_date() function belonged in pretty.h (it's defined in
pretty.c), its two users outside of pretty.c didn't strictly need to
include pretty.h, as they get it indirectly, but let's add it to them
anyway.
Similarly, the change to "builtin/{fast-import,show-branch,tag}.c"
isn't needed as far as the compiler is concerned, but since they all
use the "DATE_MODE()" macro we now define in date.h, let's have them
include it.
We could simply include this new header in "cache.h", but as this
change shows these functions weren't common enough to warrant
including in it in the first place. By moving them out of cache.h
changes to this API will no longer cause a (mostly) full re-build of
the project when "make" is run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the parsing of "grep.patternType" and
"grep.extendedRegexp". This changes no behavior, but gets rid of
complex parsing logic that isn't needed anymore.
When "grep.patternType" was introduced in 84befcd0a4 (grep: add a
grep.patternType configuration setting, 2012-08-03) we promised that:
1. You can set "grep.patternType", and "[setting it to] 'default'
will return to the default matching behavior".
In that context "the default" meant whatever the configuration
system specified before that change, i.e. via grep.extendedRegexp.
2. We'd support the existing "grep.extendedRegexp" option, but ignore
it when the new "grep.patternType" option is set. We said we'd
only ignore the older "grep.extendedRegexp" option "when the
`grep.patternType` option is set to a value other than
'default'".
In a preceding commit we changed grep_config() to be called after
grep_init(), which means that much of the complexity here can go
away.
As before both "grep.patternType" and "grep.extendedRegexp" are
last-one-wins variable, with "grep.extendedRegexp" yielding to
"grep.patternType", except when "grep.patternType=default".
Note that as the previously added tests indicate this cannot be done
on-the-fly as we see the config variables, without introducing more
state keeping. I.e. if we see:
-c grep.extendedRegexp=false
-c grep.patternType=default
-c extendedRegexp=true
We need to select ERE, since grep.patternType=default unselects that
variable, which normally has higher precedence, but we also need to
select BRE in cases of:
-c grep.extendedRegexp=true \
-c grep.extendedRegexp=false
Which would not be the case for this, which select ERE:
-c grep.patternType=extended \
-c grep.extendedRegexp=false
Therefore we cannot do this on-the-fly in grep_config without also
introducing tracking variables for not only the pattern type, but what
the source of that pattern type was.
So we need to decide on the pattern after our config was fully
parsed. Let's do that by deferring the decision on the pattern type
until it's time to compile it in compile_regexp().
By that time we've not only parsed the config, but also handled the
command-line options. Those will set "opt.pattern_type_option" (*not*
"opt.extended_regexp_option"!).
At that point all we need to do is see if "grep.patternType" was
UNSPECIFIED in the end (including an explicit "=default"), if so we'll
use the "grep.extendedRegexp" configuration, if any.
See my 07a3d41173 (grep: remove regflags from the public grep_opt
API, 2017-06-29) for addition of the two comments being removed here,
i.e. the complexity noted in that commit is now going away.
1. https://lore.kernel.org/git/patch-v8-09.10-c211bb0c69d-20220118T155211Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_init() function used the odd pattern of initializing the
passed-in "struct grep_opt" with a statically defined "grep_defaults"
struct, which would be modified in-place when we invoked
grep_config().
So we effectively (b) initialized config, (a) then defaults, (c)
followed by user options. Usually those are ordered as "a", "b" and
"c" instead.
As the comments being removed here show the previous behavior needed
to be carefully explained as we'd potentially share the populated
configuration among different instances of grep_init(). In practice we
didn't do that, but now that it can't be a concern anymore let's
remove those comments.
This does not change the behavior of any of the configuration
variables or options. That would have been the case if we didn't move
around the grep_config() call in "builtin/log.c". But now that we call
"grep_config" after "git_log_config" and "git_format_config" we'll
need to pass in the already initialized "struct grep_opt *".
See 6ba9bb76e0 (grep: copy struct in one fell swoop, 2020-11-29) and
7687a0541e (grep: move the configuration parsing logic to grep.[ch],
2012-10-09) for the commits that added the comments.
The memcpy() pattern here will be optimized away and follows the
convention of other *_init() functions. See 5726a6b401 (*.c *_init():
define in terms of corresponding *_INIT macro, 2021-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change grep_cmd_config() to stop passing around the always-NULL "cb"
value. When this code was added in 7e8f59d577 (grep: color patterns
in output, 2009-03-07) it was non-NULL, but when that changed in
15fabd1bbd (builtin/grep.c: make configuration callback more
reusable, 2012-10-09) this code was left behind.
In a subsequent change I'll start using the "cb" value, this will make
it clear which functions we call need it, and which don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2 (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fc (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d8 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2 (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d8 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
34ae3b70 (name-rev: deprecate --stdin in favor of --annotate-stdin,
2022-01-05) added --annotate-stdin to replace --stdin as a clearer
flag name. Since --stdin is to be deprecated, we should replace
--stdin in the output from "git name-rev -h".
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
It's useful to be able to countermand a previous --graph option, for
example if `git log --graph` is run via an alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating references via git-fetch(1), then by default we report to
the user which references have been changed. This output is formatted in
a nice table such that the different columns are aligned. Because the
first column contains abbreviated object IDs we thus need to iterate
over all refs which have changed and compute the minimum length for
their respective abbreviated hashes. While this effort makes sense in
most cases, it is wasteful when the user passes the `--quiet` flag: we
don't print the summary, but still compute the length.
Skip computing the summary width when the user asked for us to be quiet.
This gives us a speedup of nearly 10% when doing a mirror-fetch in a
repository with thousands of references being updated:
Benchmark 1: git fetch --quiet +refs/*:refs/* (HEAD~)
Time (mean ± σ): 96.078 s ± 0.508 s [User: 91.378 s, System: 10.870 s]
Range (min … max): 95.449 s … 96.760 s 5 runs
Benchmark 2: git fetch --quiet +refs/*:refs/* (HEAD)
Time (mean ± σ): 88.214 s ± 0.192 s [User: 83.274 s, System: 10.978 s]
Range (min … max): 87.998 s … 88.446 s 5 runs
Summary
'git fetch --quiet +refs/*:refs/* (HEAD)' ran
1.09 ± 0.01 times faster than 'git fetch --quiet +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new worktree, it is reasonable to expect that we want to
use the current set of sparse-checkout settings for that new worktree.
This is particularly important for repositories where the worktree would
become too large to be useful. This is even more important when using
partial clone as well, since we want to avoid downloading the missing
blobs for files that should not be written to the new worktree.
The only way to create such a worktree without this intermediate step of
expanding the full worktree is to copy the sparse-checkout patterns and
config settings during 'git worktree add'. Each worktree has its own
sparse-checkout patterns, and the default behavior when the
sparse-checkout file is missing is to include all paths at HEAD. Thus,
we need to have patterns from somewhere, they might as well be the
current worktree's patterns. These are then modified independently in
the future.
In addition to the sparse-checkout file, copy the worktree config file
if worktree config is enabled and the file exists. This will copy over
any important settings to ensure the new worktree behaves the same as
the current one. The only exception we must continue to make is that
core.bare and core.worktree should become unset in the worktree's config
file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git sparse-checkout set/init` enables worktree-specific
configuration[*] by setting extensions.worktreeConfig=true, but neglects
to perform the additional necessary bookkeeping of relocating
`core.bare=true` and `core.worktree` from $GIT_COMMON_DIR/config to
$GIT_COMMON_DIR/config.worktree, as documented in git-worktree.txt. As a
result of this oversight, these settings, which are nonsensical for
secondary worktrees, can cause Git commands to incorrectly consider a
worktree bare (in the case of `core.bare`) or operate on the wrong
worktree (in the case of `core.worktree`). Fix this problem by taking
advantage of the recently-added init_worktree_config() which enables
`extensions.worktreeConfig` and takes care of necessary bookkeeping.
While at it, for backward-compatibility reasons, also stop upgrading the
repository format to "1" since doing so is (unintentionally) not
required to take advantage of `extensions.worktreeConfig`, as explained
by 11664196ac ("Revert "check_repository_format_gently(): refuse
extensions for old repositories"", 2020-07-15).
[*] The main reason to use worktree-specific config for the
sparse-checkout builtin was to avoid enabling sparse-checkout patterns
in one and causing a loss of files in another. If a worktree does not
have a sparse-checkout patterns file, then the sparse-checkout logic
will not kick in on that worktree.
Reported-by: Sean Allred <allred.sean@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d1 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in
402c47d939 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105f (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that happened when the --path option was
provided. This leak has been with us ever since the option was added
in 3970243150 (add --path option to git hash-object, 2008-08-03).
We can now mark "t1007-hash-object.sh" as passing when git is compiled
with SANITIZE=leak. It'll now run in the the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
* add '<>' around arguments where missing
* convert plurals into '...' forms
This applies the style guide for documentation.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find more incompatible options to factorize.
When more than two options are mutually exclusive, print the ones
which are actually on the command line.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove mistaken right square brackets from "git-diff"
usage string. Make the usage string conform to "git-diff"
documentation (Documentation/git-diff.txt).
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally diffs will contain a hunk header of the format
"@@ -2,2 +2,15 @@ code". However when there is only 1 line of
change, the unified diff format allows for the second comma
separated value to be omitted in either before or after
line counts.
This can produce hunk headers that look like
"@@ -2 +2,18 @@ code" or "@@ -2,2 +2 @@ code".
As a result, scan_hunk_header mistakenly returns the line
number as line count, which then results in unpredictable
parsing errors with the rest of the patch, including giving
multiple lines of output for a single commit.
Fix by explicitly setting line count to 1 when there is
no comma, and add a test.
apply.c contains this same logic except it is correct. A
worthwhile future project might be to unify these two diff
parsers so they both benefit from fixes.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --remerge-diff option will need to create new blobs and trees
representing the "automatic merge" state. If one is traversing a
long project history, one can easily get hundreds of thousands of
loose objects generated during `log --remerge-diff`. However, none of
those loose objects are needed after we have completed our diff
operation; they can be summarily deleted.
Add a new helper function to tmp_objdir to discard all the contained
objects, and call it after each merge is handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is specified, we remerge all (two parent) merge commits
and diff the actual merge commit to the automatically created version,
in order to show how users removed conflict markers, resolved the
different conflict versions, and potentially added new changes outside
of conflict regions in order to resolve semantic merge problems (or,
possibly, just to hide other random changes).
This capability works by creating a temporary object directory and
marking it as the primary object store. This makes it so that any blobs
or trees created during the automatic merge are easily removable
afterwards by just deleting all objects from the temporary object
directory.
There are a few ways that this implementation is suboptimal:
* `log --remerge-diff` becomes slow, because the temporary object
directory can fill with many loose objects while running
* the log output can be muddied with misplaced "warning: cannot merge
binary files" messages, since ll-merge.c unconditionally writes those
messages to stderr while running instead of allowing callers to
manage them.
* important conflict and warning messages are simply dropped; thus for
conflicts like modify/delete or rename/rename or file/directory which
are not representable with content conflict markers, there may be no
way for a user of --remerge-diff to know that there had been a
conflict which was resolved (and which possibly motivated other
changes in the merge commit).
* when fixing the previous issue, note that some unimportant conflict
and warning messages might start being included. We should instead
make sure these remain dropped.
Subsequent commits will address these issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a hidden ref, e.g.:
$ git push origin HEAD:refs/hidden/foo
"receive-pack" will reject our request with an error message like this:
! [remote rejected] HEAD -> refs/hidden/foo (deny updating a hidden ref)
The remote side ("git-receive-pack") will not create the hidden ref as
expected, but the pack file sent by "git-send-pack" is left inside the
remote repository. I.e. the quarantine directory is not purged as it
should be.
Add a checkpoint before calling "tmp_objdir_migrate()" and after calling
the "pre-receive" hook to purge that temporary data in the quarantine
area when there is no command ready to run.
The reason we do not add the checkpoint before the "pre-receive" hook,
but after it, is that the "pre-receive" hook is called with a switch-off
"skip_broken" flag, and all commands, even broken ones, should be fed
by calling "feed_receive_hook()".
Add a new test case in t5516 as well.
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Helped-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Chen Bojun <bojun.cbj@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consolidate the logic for deciding when to create a new branch in
cmd_branch(), and save the result for reuse. Besides making the function
more explicit, this allows us to validate options that can only be used
when creating a branch. Such an option does not exist yet, but one will
be introduced in a subsequent commit.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is preparation for a future commit that will simplify
create_branch() so that it always creates a branch. This will allow
create_branch() to accept a dry_run parameter (which is needed for "git
branch --recurse-submodules").
create_branch() used to always create a branch, but 4fc5006676 (Add
branch --set-upstream, 2010-01-18) changed it to also be able to set
tracking information without creating a branch.
Refactor the code that sets tracking information into its own functions
dwim_branch_start() and dwim_and_setup_tracking(). Also change an
invocation of create_branch() in cmd_branch() in builtin/branch.c to use
dwim_and_setup_tracking(), since that invocation is only for setting
tracking information (in "git branch --set-upstream-to").
As of this commit, create_branch() is no longer invoked in a way that
does not create branches.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning refs fails, we print an error to stderr, but still
exit 0 from 'git fetch'. Since this is a genuine error, fetch
should be exiting with some non-zero exit code. Make it so.
The --prune option was introduced in f360d844de ("builtin-fetch: add
--prune option", 2009-11-10). Unfortunately it's unclear from that
commit whether ignoring the exit code was an oversight or
intentional, but it feels like an oversight.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
The error message when invoking a negotiate-only fetch without providing
any tips incorrectly refers to a --negotiate-tip=* argument. Fix this to
use the actual argument, --negotiation-tip=*.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were introduced in commit 55dfcf9591 ("sparse-checkout: clear
tracked sparse dirs", 2021-09-08) and missed in my review at the time.
Plug the leaks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed support for `stash.useBuiltin`, but left a warning in its
place.
After almost two years, and several major versions, it is time to remove
even that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 90a6bb98d1 (legacy stash -p: respect the add.interactive.usebuiltin
setting, 2019-12-21), we added support to use the built-in `add -p` from
the scripted `stash -p`.
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we retired the scripted `stash` (including the scripted `stash -p`).
Therefore this support is no longer necessary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
At the start of a rebase, ORIG_HEAD is updated to the tip of the
branch being rebased. Unfortunately reset_head() always uses the
current value of HEAD for this which is incorrect if the rebase is
started with "git rebase <upstream> <branch>" as in that case
ORIG_HEAD should be updated to <branch>. This only affects the "apply"
backend as the "merge" backend does not yet use reset_head() for the
initial checkout. Fix this by passing in orig_head when calling
reset_head() and add some regression tests.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
move_to_original_branch() passes the message intended for the branch
reflog as `orig_head_msg`. Fix this by adding a `branch_msg` member to
struct reset_head_opts and add a regression test. Note that these
reflog messages do not respect GIT_REFLOG_ACTION. They are not alone
in that and will be fixed in a future series.
The "merge" backend already has tests that check both the branch and
HEAD reflogs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a confusingly large number of parameters which
makes it difficult to remember which order to pass them in. The
following commits will add a couple more parameters which makes the
problem worse. To address this change the function to take a struct of
options. Using a struct means that it is no longer necessary to
remember which order to pass the parameters in and anyone reading the
code can easily see which value is passed to each parameter.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If ORIG_HEAD is not set by passing RESET_ORIG_HEAD then there is no
need to pass anything for reflog_orig_head. In addition to the callers
fixed in this commit move_to_original_branch() also passes
reflog_orig_head without setting ORIG_HEAD. That caller is mistakenly
passing the message it wants to put in the branch reflog which is not
currently possible so we delay fixing that caller until we can pass
the message as the branch reflog.
A later commit will make it a BUG() to pass reflog_orig_head without
RESET_ORIG_HEAD, that changes cannot be done here as it needs to wait
for move_to_original_branch() to be fixed first.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default_reflog parameter of create_autostash() is passed to
reset_head(). However as creating a stash does not involve updating
any refs the parameter is not used by reset_head(). Removing the
parameter from create_autostash() simplifies the callers.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is only needed when a ref is going to be updated and
the caller does not pass an explicit reflog message. Callers that are
only discarding uncommitted changes in the working tree such as such
as "rebase --skip" or create_autostash() do not update any refs so
should not have to worry about passing this parameter.
This change is not intended to have any user visible changes. The
pointer comparison between `oid` and `&head_oid` checks that the
caller did not pass an oid to be checked out. As no callers pass
RESET_HEAD_RUN_POST_CHECKOUT_HOOK without passing an oid there are
no changes to when the post-checkout hook is run. As update_ref() only
updates the ref if the oid passed to it differs from the current ref
there are no changes to when HEAD is updated.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the action parameter is to setup the error messages
for unpack_trees(). All but two cases pass either "checkout" or
"reset". The case that passes "reset --hard" would be better passing
"reset" so that the error messages match the builtin reset command
like all the other callers that are doing a reset. The case that
passes "Fast-forwarded" is only updating HEAD and so the parameter is
unused in that case as it does not call unpack_trees(). The value to
pass to setup_unpack_trees_porcelain() can be determined by checking
whether flags contains RESET_HEAD_HARD without the caller having to
specify it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and it will be convenient later in the
series to have it in its own function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a branchless and tagless but not refless remote using
protocol v0 or v1, Git calls transport_fetch_refs() with an empty ref
list. This makes the clone fail with the message "remote transport
reported error".
Git should have refrained from calling transport_fetch_refs(), just like
it does in the case that the remote is refless. Therefore, teach Git to
do this.
In protocol v2, this does not happen because the client passes
ref-prefix arguments that filter out non-branches and non-tags in the
ref advertisement, making the remote appear empty.
Note that this bug concerns logic in builtin/clone.c and only affects
cloning, not fetching.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two commit_lists created in cmd_merge() that were only
conditionally free()'d. Add a quick conditional call to
free_commit_list() for each of them at the end of the function.
Testing this commit against t6404 under valgrind shows that this patch
fixes the following two leaks:
16 bytes in 1 blocks are definitely lost in loss record 16 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x47FC93: reduce_parents (merge.c:1114)
by 0x4801EE: collect_parents (merge.c:1214)
by 0x480B56: cmd_merge (merge.c:1465)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
by 0x4E7DFA: main (common-main.c:56)
8 (16 direct, 32 indirect) bytes in 1 blocks are definitely lost in \
loss record 61 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x52A8F2: commit_list_insert_by_date (commit.c:620)
by 0x5270AC: get_merge_bases_many_0 (commit-reach.c:413)
by 0x52716C: repo_get_merge_bases (commit-reach.c:438)
by 0x480E5A: cmd_merge (merge.c:1520)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
There are still 3 leaks in chdir_notify_register() after this, but
chdir_notify_register() has been brought up on the list before and folks
were not a fan of fixing those, so I'm not touching them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating the sparse-checkout file, Git does not create the leading
directory, "$GIT_DIR/info", if it does not exist. This causes problems
if the repository does not have that directory. Therefore, ensure that
the leading directory is created.
This is the only "open" in builtin/sparse-checkout.c that does not have
a leading directory check. (The other one in write_patterns_and_update()
does.)
Note that the test needs to explicitly specify a template when running
"git init" because the default template used in the tests has the
"info/" directory included.
Helped-by: Jose Lopes <jabolopes@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
Follow the example set by 12909b6b (i18n: turn "options are
incompatible" into "cannot be used together", 2022-01-05) and use
the same message string to reduce the need for translation.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a run command cannot be executed or found, shells return exit code
126 or 127, respectively. Valid run commands are allowed to return
these codes as well to indicate bad revisions, though, for historical
reasons. This means typos can cause bogus bisect runs that go over the
full distance and end up reporting invalid results.
The best solution would be to reserve exit codes 126 and 127, like
71b0251cdd (Bisect run: "skip" current commit if script exit code is
125., 2007-10-26) did for 125, and abort bisect run when we get them.
That might be inconvenient for those who relied on the documentation
stating that 126 and 127 can be used for bad revisions, though.
The workaround used by this patch is to run the command on a known-good
revision and abort if we still get the same error code. This adds one
step to runs with scripts that use exit codes 126 and 127, but keeps
them supported, with one exception: It won't work with commands that
cannot recognize the (manually marked) known-good revision as such.
Run commands that use low exit codes are unaffected. Typos are reported
after executing the missing command twice and three checkouts (the first
step, the known good revision and back to the revision of the first
step).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the cleanup code out of the loop and make sure all execution paths
pass through it to avoid leaking memory.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strvec "args" in bisect_run() is initialized and cleared, but never
added to. Nevertheless its first member is printed when reporting a
bisect_state() error. That's not useful, since it's always NULL.
Before d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) the intended new state was reported if it
could not be set. Reinstate that behavior and remove the unused strvec.
Reported-by: Ramkumar Ramachandra <r@artagnon.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_fetch() does the following with the assumption that objects are
fetched:
* Run gc
* Write commit graphs (if enabled by fetch.writeCommitGraph=true)
However, neither of these tasks makes sense if objects are not fetched
e.g. `git fetch --negotiate-only` never fetches objects.
Speed up cmd_fetch() by bailing out early if we know for certain that
objects will not be fetched. cmd_fetch() can bail out early whenever
objects are not fetched, but for now this only considers
--negotiate-only.
The same optimization does not apply to `git fetch --dry-run` because
that actually fetches objects; the dry run refers to not updating refs.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an early return with 'goto cleanup' in cmd_fetch() so that the
string_list is always cleared (the string_list_clear() call is purely
cleanup; the string_list is not reused). This makes cleanup consistent
so that a subsequent commit can use 'goto cleanup' to bail out early.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace unconditional index expansion in 'do_reupdate()' with one scoped to
only where a full index is needed. A full index is only required in
'do_reupdate()' when a sparse directory in the index differs from HEAD; in
that case, the index is expanded and the operation restarted.
Because the index should only be expanded if a sparse directory is modified,
add a test ensuring the index is not expanded when differences only exist
within the sparse cone.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of the sparse index with `update-index`. Most variations of
`update-index` work without explicitly expanding the index or making any
other updates in or outside of `update-index.c`.
The one usage requiring additional changes is `--cacheinfo`; if a file
inside a sparse directory was specified, the index would not be expanded
until after the cache tree is invalidated, leading to a mismatch between the
index and cache tree. This scenario is handled by rearranging
`add_index_entry_with_check`, allowing `index_name_stage_pos` to expand the
index *before* attempting to invalidate the relevant cache tree path,
avoiding cache tree/index corruption.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add repository settings to allow usage of the sparse index.
When using the `--all` option, sparse directories are ignored by default due
to the `skip-worktree` flag, so there is no need to expand the index. If
`--ignore-skip-worktree-bits` is specified, the index is expanded in order
to check out all files.
When checking out individual files, existing behavior in a full index is to
exit with an error if a directory is specified (as the directory name will
not match an index entry). However, it is possible in a sparse index to
match a directory name to a sparse directory index entry, but checking out
that sparse directory still results in an error on checkout. To reduce some
potential confusion for users, `checkout_file(...)` explicitly exits with an
informative error if provided with a sparse directory name. The test
corresponding to this scenario verifies the error message, which now differs
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update `checkout-index` to no longer refresh files that have the
`skip-worktree` bit set, exiting with an error if `skip-worktree` filenames
are directly provided to `checkout-index`. The newly-added
`--ignore-skip-worktree-bits` option provides a mechanism to replicate the
old behavior, checking out *all* files specified (even those with
`skip-worktree` enabled).
The ability to toggle whether files should be checked-out based on
`skip-worktree` already exists in `git checkout` and `git restore` (both of
which have an `--ignore-skip-worktree-bits` option). The change to, by
default, ignore `skip-worktree` files is especially helpful for
sparse-checkout; it prevents inadvertent creation of files outside the
sparse definition on disk and eliminates the need to expand a sparse index
when using the `--all` option.
Internal usage of `checkout-index` in `git stash` and `git filter-branch` do
not make explicit use of files with `skip-worktree` enabled, so
`--ignore-skip-worktree-bits` is not added to them.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove full index requirement for `git clean` and test to ensure the index
is not expanded in `git clean`. Add to existing test for `git clean` to
verify cleanup of untracked files in sparse directories is consistent
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange conditions in method determining whether index expansion is
necessary when a pathspec is specified for `git reset`, placing less
expensive condition first. Additionally, add details & examples to related
code comments to help with readability.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some lockfile code called free() in signal-death code path, which
has been corrected.
* ps/lockfile-cleanup-fix:
fetch: fix deadlock when cleaning up lockfiles in async signals
Fix a typo in my recent 03dc51fe849 (cat-file: fix remaining usage
bugs, 2021-10-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix up whitespace issues around "(... | ...)" in the SYNOPSIS and
usage. These were introduced in ab/cat-file series. See
e145efa6059 (Merge branch 'ab/cat-file' into next, 2022-01-05). In
particular 57d6a1cf96, 5a40417876 and 97fe725075 in that series.
We'll now correctly emit this usage output:
$ git cat-file -h
usage: git cat-file <type> <object>
or: git cat-file (-e | -p) <object>
or: git cat-file (-t | -s) [--allow-unknown-type] <object>
[...]
Before this the last line of that would be inconsistent with the
preceding "(-e | -p)":
or: git cat-file ( -t | -s ) [--allow-unknown-type] <object>
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching out manual arg parsing for the parse-options API for the
expire and delete subcommands.
Move explicit_expiry flag into cmd_reflog_expire_cb struct so callbacks
can set both the value of the timestamp as well as the explicit_expiry
flag.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash apply" forgot to attempt restoring untracked files when
it failed to restore changes to tracked ones.
* en/stash-df-fix:
stash: do not return before restoring untracked files
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
Code clean-up to hide vreportf() from public API.
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Code refactoring in the reflog part of refs API.
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
Use of certain "git rev-list" options with "git fast-export"
created nonsense results (the worst two of which being "--reverse"
and "--invert-grep --grep=<foo>"). The use of "--first-parent" is
made to behave a bit more sensible than before.
* ws/fast-export-with-revision-options:
fast-export: fix surprising behavior with --first-parent
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
Using a buffer limited to 2048 is unnecessarily limiting. Switch to
using a string buffer to read in stdin for annotation.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a --annotate-stdin that is functionally equivalent of --stdin.
--stdin does not behave as --stdin in other subcommands, such as
pack-objects whereby it takes one argument per line. Since --stdin can
be a confusing and misleading name, rename it to --annotate-stdin.
This change adds a warning to --stdin warning that it will be removed in
the future.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the push-to-checkout hook away from run-command.h to and over to
the new hook.h library.
This removes the last direct user of run_hook_le(), so we could remove
that function now, but let's leave that to a follow-up cleanup commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For certain one-shot hooks we'd like to optimistically run them, and
not complain if they don't exist.
This was already supported by the underlying hook.c library, but had
not been exposed via "git hook run". The command version of this will
be used by send-email in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library in builtin/worktree.c. For this special case
we need a change to the hook API to teach it to run the hook from a
given directory.
We cannot skip the "absolute_path" flag and just check if "dir" is
specified as we'd then fail to find our hook in the new dir we'd
chdir() to. We currently don't have a use-case for running a hook not
in our "base" repository at a given absolute path, so let's have "dir"
imply absolute_path(find_hook(hook_name)).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library, except in the case of
builtin/worktree.c. That special-case will be handled in a subsequent
commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach post-merge to use the hook.h library instead of the
run-command.h library to run hooks.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach applypatch-msg to use the hook.h library instead of the
run-command.h library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-rebase hook away from run-command.h to and over to the
new hook.h library.
Since this hook needs arguments introduce a run_hooksl() wrapper, like
run_hooks(), but it takes varargs.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pre-applypatch and post-applypatch to use the hook.h library
instead of the run-command.h library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-auto-gc hook away from run-command.h to and over to the
new hook.h library. This uses the new run_hooks() wrapper.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching packfiles, we write a bunch of lockfiles for the packfiles
we're writing into the repository. In order to not leave behind any
cruft in case we exit or receive a signal, we register both an exit
handler as well as signal handlers for common signals like SIGINT. These
handlers will then unlink the locks and free the data structure tracking
them. We have observed a deadlock in this logic though:
(gdb) bt
#0 __lll_lock_wait_private () at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:95
#1 0x00007f4932bea2cd in _int_free (av=0x7f4932f2eb20 <main_arena>, p=0x3e3e4200, have_lock=0) at malloc.c:3969
#2 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#3 0x0000000000662ab1 in string_list_clear ()
#4 0x000000000044f5bc in unlock_pack_on_signal ()
#5 <signal handler called>
#6 _int_free (av=0x7f4932f2eb20 <main_arena>, p=<optimized out>, have_lock=0) at malloc.c:4024
#7 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#8 0x000000000065afd5 in strbuf_release ()
#9 0x000000000066ddb9 in delete_tempfile ()
#10 0x0000000000610d0b in files_transaction_cleanup.isra ()
#11 0x0000000000611718 in files_transaction_abort ()
#12 0x000000000060d2ef in ref_transaction_abort ()
#13 0x000000000060d441 in ref_transaction_prepare ()
#14 0x000000000060e0b5 in ref_transaction_commit ()
#15 0x00000000004511c2 in fetch_and_consume_refs ()
#16 0x000000000045279a in cmd_fetch ()
#17 0x0000000000407c48 in handle_builtin ()
#18 0x0000000000408df2 in cmd_main ()
#19 0x00000000004078b5 in main ()
The process was killed with a signal, which caused the signal handler to
kick in and try free the data structures after we have unlinked the
locks. It then deadlocks while calling free(3P).
The root cause of this is that it is not allowed to call certain
functions in async-signal handlers, as specified by signal-safety(7).
Next to most I/O functions, this list of disallowed functions also
includes memory-handling functions like malloc(3P) and free(3P) because
they may not be reentrant. As a result, if we execute such functions in
the signal handler, then they may operate on inconistent state and fail
in unexpected ways.
Fix this bug by not calling non-async-signal-safe functions when running
in the signal handler. We're about to re-raise the signal anyway and
will thus exit, so it's not much of a problem to keep the string list of
lockfiles untouched. Note that it's fine though to call unlink(2), so
we'll still clean up the lockfiles correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git update-index --refresh' and '--really-refresh' should force writing
of the index file if racy timestamps have been encountered, as
'git status' already does [1].
Note that calling 'git update-index --refresh' still does not guarantee
that there will be no more racy timestamps afterwards (the same holds
true for 'git status'):
- calling 'git update-index --refresh' immediately after touching and
adding a file may still leave racy timestamps if all three operations
occur within the racy-tolerance (usually 1 second unless USE_NSEC has
been defined)
- calling 'git update-index --refresh' for timestamps which are set into
the future will leave them racy
To guarantee that such racy timestamps will be resolved would require to
wait until the system clock has passed beyond these timestamps and only
then write the index file. Especially for future timestamps, this does
not seem feasible because of possibly long delays/hangs.
[1] https://lore.kernel.org/git/d3dd805c-7c1d-30a9-6574-a7bfcb7fc013@syntevo.com/
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two functions that have very similar logic of finding a header
value. find_commit_header, and find_header. We can conslidate the logic
by introducing a new function find_header_mem, which is equivalent to
find_commit_header except it takes a len parameter that determines how
many bytes will be read. find_commit_header and find_header can then both
call find_header_mem.
This reduces duplicate logic, as the logic for finding header values
can now all live in one place.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use placeholders for constant tokens. The strings are turned into
"cannot be used together"
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit bee8691f19 ("stash: restore untracked files AFTER restoring
tracked files", 2021-09-10), we correctly identified that we should
restore changes to tracked files before attempting to restore untracked
files, and accordingly moved the code for restoring untracked files a
few lines down in do_apply_stash(). Unfortunately, the intervening
lines had some early return statements meaning that we suddenly stopped
restoring untracked files in some cases.
Even before the previous commit, there was another possible issue with
the current code -- a post-stash-apply 'git status' that was intended
to be run after restoring the stash was skipped when we hit a conflict
(or other error condition), which seems slightly inconsistent.
Fix both issues by saving the return status, and letting other
functionality run before returning.
Reported-by: AJ Henderson
Test-case-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
