When you specify a local repository on the command line of
clone, ls-remote, upload-pack, receive-pack, or upload-archive,
or in a request to git-daemon, we perform a little bit of
lookup magic, doing things like looking in working trees for
.git directories and appending ".git" for bare repos.
For clone, this magic happens in get_repo_path. For
everything else, it happens in enter_repo. In both cases,
there are some ambiguous or confusing cases that aren't
handled well, and there is one case that is not handled the
same by both methods.
This patch tries to provide (and test!) standard, sensible
lookup rules for both code paths. The intended changes are:
1. When looking up "foo", we have always preferred
a working tree "foo" (containing "foo/.git" over the
bare "foo.git". But we did not prefer a bare "foo" over
"foo.git". With this patch, we do so.
2. We would select directories that existed but didn't
actually look like git repositories. With this patch,
we make sure a selected directory looks like a git
repo. Not only is this more sensible in general, but it
will help anybody who is negatively affected by change
(1) negatively (e.g., if they had "foo.git" next to its
separate work tree "foo", and expect to keep finding
"foo.git" when they reference "foo").
3. The enter_repo code path would, given "foo", look for
"foo.git/.git" (i.e., do the ".git" append magic even
for a repo with working tree). The clone code path did
not; with this patch, they now behave the same.
In the unlikely case of a working tree overlaying a bare
repo (i.e., a ".git" directory _inside_ a bare repo), we
continue to treat it as a working tree (prefering the
"inner" .git over the bare repo). This is mainly because the
combination seems nonsensical, and I'd rather stick with
existing behavior on the off chance that somebody is relying
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level grep_source code will automatically load the
userdiff driver to see whether a file is binary. However,
when we are threaded, it will load the drivers in a
non-deterministic order, handling each one as its assigned
thread happens to be scheduled.
Meanwhile, the attribute lookup code (which underlies the
userdiff driver lookup) is optimized to handle paths in
sequential order (because they tend to share the same
gitattributes files). Multi-threading the lookups destroys
the locality and makes this optimization less effective.
We can fix this by pre-loading the userdiff driver in the
main thread, before we hand off the file to a worker thread.
My best-of-five for "git grep foo" on the linux-2.6
repository went from:
real 0m0.391s
user 0m1.708s
sys 0m0.584s
to:
real 0m0.360s
user 0m1.576s
sys 0m0.572s
Not a huge speedup, but it's quite easy to do. The only
trick is that we shouldn't perform this optimization if "-a"
was used, in which case we won't bother checking whether
the files are binary at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_source interface (as opposed to grep_buffer) will
eventually gives us a richer interface for telling the
low-level grep code about our buffers. Eventually this will
lead to things like better binary-file handling. For now, it
lets us drop a lot of now-redundant code.
The conversion is mostly straight-forward. One thing to note
is that the memory ownership rules for "struct grep_source"
are different than the "struct work_item" found here (the
former will copy things like the filename, rather than
taking ownership). Therefore you will also see some slight
tweaking of when filename buffers are released.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-threaded git-grep code needs to serialize access
to the thread-unsafe read_sha1_file call. It does this with
a mutex that is local to builtin/grep.c.
Let's instead push this down into grep.c, where it can be
used by both builtin/grep.c and grep.c. This will let us
safely teach the low-level grep.c code tricks that involve
reading from the object db.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level grep code traditionally didn't care about
threading, as it doesn't do any threading itself and didn't
call out to other non-thread-safe code. That changed with
0579f91 (grep: enable threading with -p and -W using lazy
attribute lookup, 2011-12-12), which pushed the lookup of
funcname attributes (which is not thread-safe) into the
low-level grep code.
As a result, the low-level code learned about a new global
"grep_attr_mutex" to serialize access to the attribute code.
A multi-threaded caller (e.g., builtin/grep.c) is expected
to initialize the mutex and set "use_threads" in the
grep_opt structure. The low-level code only uses the lock if
use_threads is set.
However, putting the use_threads flag into the grep_opt
struct is not the most logical place. Whether threading is
in use is not something that matters for each call to
grep_buffer, but is instead global to the whole program
(i.e., if any thread is doing multi-threaded grep, every
other thread, even if it thinks it is doing its own
single-threaded grep, would need to use the locking). In
practice, this distinction isn't a problem for us, because
the only user of multi-threaded grep is "git-grep", which
does nothing except call grep.
This patch turns the opt->use_threads flag into a global
flag. More important than the nit-picking semantic argument
above is that this means that the locking functions don't
need to actually have access to a grep_opt to know whether
to lock. Which in turn can make adding new locks simpler, as
we don't need to pass around a grep_opt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "merge/cherry-pick" messages in whence_s for translation.
These messages returned from whence_s function are used as argument
to build other messages.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was introduced in b5d97e6 (pack-objects: run rev-list
equivalent internally. - 2006-09-04), stating that
git pack-objects [options] base-name <refs...>
is acceptable and refs should be passed into rev-list. But that's not
true. All arguments after base-name are ignored.
Remove the comment and reject this syntax (i.e. no more arguments after
base name)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
Before f824628 (merge: use editor by default in interactive sessions,
2012-01-10), git-merge only started an editor if the user explicitly
asked for it with --edit. Thus it seemed unlikely that the user would
need extra guidance.
After f824628 the _normal_ thing is to start an editor. Give at least
an indication of why we are doing it.
The sentence about justification is one of the few things about
standard git that are not agnostic to the workflow that the user
chose. However, f824628 was proposed by Linus specifically to
discourage users from merging unrelated upstream progress into topic
branches. So we may as well take another step in the same direction.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/index-pack-no-recurse:
index-pack: eliminate unlimited recursion in get_base_data()
index-pack: eliminate recursion in find_unresolved_deltas
Eliminate recursion in setting/clearing marks in commit list
* mh/ref-clone-without-extra-refs:
write_remote_refs(): create packed (rather than extra) refs
add_packed_ref(): new function in the refs API.
ref_array: keep track of whether references are sorted
pack_refs(): remove redundant check
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
6f48d39 (clone: delay cloning until after remote HEAD checking -
2012-01-16) allows us to perform some checks on remote refs before the
actual cloning happens. But not all transport types support
this. Remote helper with "import" capability will not return complete
ref information until fetch is performed and therefore the clone cannot
be delayed.
foreign_vcs field in struct remote was used to detect this kind of transport
and save the result. This is a mistake because foreign_vcs is designed
to override url-based transport detection. As a result, if the same
"struct transport *" object is used on many different urls and one of
them attached remote transport, the following urls will be mistakenly
attached to the same transport. This fault is worked around by dad0b3d
(push: do not let configured foreign-vcs permanently clobbered -
2012-01-23)
To fix this, detect incomplete refs from transport_get_remote_refs()
by SHA-1. Incomplete ones must have null SHA-1 (*). Then revert
changes related to foreign_cvs field in 6f48d39 and dad0b3d.
A good thing from this change is that cloning smart http transport can
also be delayed. Earlier it falls into the same category "remote
transport, no delay".
(*) Theoretically if one of the remote refs happens to have null SHA-1,
it will trigger false alarm and the clone will not be delayed. But
that chance may be too small for us to pay attention to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, 6f48d39 (clone: delay cloning until after remote HEAD checking,
2012-01-16) tried to record if a remote helper needs to be called after
parsing the remote when transport_get() is called, by overwriting the
field meant to store the configured remote helper name in the remote
structure.
This is OK when a remote represents a single remote repository, but fails
miserably when pushing to locations with multiple URLs, like this:
$ cat .git/config
[remote "origin"]
url = https://code.google.com/p/git-htmldocs/
url = github.com:gitster/git-htmldocs.git
push = refs/heads/master:refs/heads/master
$ git push
The second url that is supposed to use the git-over-ssh transport
mistakenly use https:// and fails with:
error: Couldn't resolve host 'github.com:gitster' while accessing
github.com:gitster/git-htmldocs.git/info/refs
fatal: HTTP request failed
The right solution would probably be to dedicate a separate field to store
the detected external helper to be used, which is valid only during a
single use of transport until it is disconnected, instead of overwriting
foreign_vcs field, but in the meantime, this band-aid should suffice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In threaded mode, git-grep emits file breaks (enabled with context, -W
and --break) into the accumulation buffers even if they are not
required. The output collection thread then uses skip_first_line to
skip the first such line in the output, which would otherwise be at
the very top.
This is wrong when the user also specified -l/-L/-c, in which case
every line is relevant. While arguably giving these options together
doesn't make any sense, git-grep has always quietly accepted it. So
do not skip anything in these cases.
Signed-off-by: Albert Yale <surfingalbert@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_remote_refs() creates new packed refs from references obtained
from the remote repository, which is "out of thin air" as far as the
local repository is concerned. Previously it did this by creating
"extra" refs, then calling pack_refs() to bake them into the
packed-refs file. Instead, create packed refs (in the packed
reference cache) directly, then call pack_refs().
Aside from being more logical, this is another step towards removing
extra refs entirely.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to look outside refs/heads for HEAD's target
(src_ref_prefix can be set to "refs/" if --mirror is used) because ref
code only allows symref in form refs/heads/...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives us an opportunity to abort the command during remote HEAD
check without wasting much bandwidth.
Cloning with remote-helper remains before the check because the remote
helper updates mapped_refs, which is necessary for remote ref checks.
foreign_vcs field is used to indicate the transport is handled by
remote helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, update the comment at "if (remote_head)"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read HEAD from disk instead of relying on local variable
our_head_points_at, so that if earlier code fails to make HEAD
properly, it'll be detected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for the -b mode, where [PATCH] is dropped but [foo] is not,
silently ate all spaces after the ].
Fix this by keeping the next isspace() character, if there is any.
Being more thorough is pointless, as the later cleanup_space() call
will normalize any sequence of whitespace to a single ' '.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revese the order of delta applying so that by the time a delta is
applied, its base is either non-delta or already inflated.
get_base_data() is still recursive, but because base's data is always
ready, the inner get_base_data() call never has any chance to call
itself again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current find_unresolved_deltas() links all bases together in a form of
tree, using struct base_data, with prev_base pointer to point to
parent node. Then it traverses down from parent to children in
recursive manner with all base_data allocated on stack.
To eliminate recursion, we simply need to put all on heap
(parse_pack_objects and fix_unresolved_deltas). After that, it's
simple non-recursive depth-first traversal loop. Each node also
maintains its own state (ofs and ref indices) to iterate over all
children nodes.
So we process one node:
- if it returns a new (child) node (a parent base), we link it to our
tree, then process the new node.
- if it returns nothing, the node is done, free it. We go back to
parent node and resume whatever it's doing.
and do it until we have no nodes to process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.8.4
Update draft release notes to 1.7.7.6
Update draft release notes to 1.7.6.6
thin-pack: try harder to use preferred base objects as base
When creating a pack using objects that reside in existing packs, we try
to avoid recomputing futile delta between an object (trg) and a candidate
for its base object (src) if they are stored in the same packfile, and trg
is not recorded as a delta already. This heuristics makes sense because it
is likely that we tried to express trg as a delta based on src but it did
not produce a good delta when we created the existing pack.
As the pack heuristics prefer producing delta to remove data, and Linus's
law dictates that the size of a file grows over time, we tend to record
the newest version of the file as inflated, and older ones as delta
against it.
When creating a thin-pack to transfer recent history, it is likely that we
will try to send an object that is recorded in full, as it is newer. But
the heuristics to avoid recomputing futile delta effectively forbids us
from attempting to express such an object as a delta based on another
object. Sending an object in full is often more expensive than sending a
suboptimal delta based on other objects, and it is even more so if we
could use an object we know the receiving end already has (i.e. preferred
base object) as the delta base.
Tweak the recomputation avoidance logic, so that we do not punt on
computing delta against a preferred base object.
The effect of this change can be seen on two simulated upload-pack
workloads. The first is based on 44 reflog entries from my git.git
origin/master reflog, and represents the packs that kernel.org sent me git
updates for the past month or two. The second workload represents much
larger fetches, going from git's v1.0.0 tag to v1.1.0, then v1.1.0 to
v1.2.0, and so on.
The table below shows the average generated pack size and the average CPU
time consumed for each dataset, both before and after the patch:
dataset
| reflog | tags
---------------------------------
before | 53358 | 2750977
size after | 32398 | 2668479
change | -39% | -3%
---------------------------------
before | 0.18 | 1.12
CPU after | 0.18 | 1.15
change | +0% | +3%
This patch makes a much bigger difference for packs with a shorter slice
of history (since its effect is seen at the boundaries of the pack) though
it has some benefit even for larger packs.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the cherry-picking machinery through a public
sequencer_pick_revisions() (renamed from pick_revisions() in
builtin/revert.c), so that cherry-picking and reverting are special
cases of a general sequencer operation. The cherry-pick builtin is
now a thin wrapper that does command-line argument parsing before
calling into sequencer_pick_revisions(). In the future, we can write
a new "foo" builtin that calls into the sequencer like:
memset(&opts, 0, sizeof(opts));
opts.action = REPLAY_FOO;
opts.revisions = xmalloc(sizeof(*opts.revs));
parse_args_populate_opts(argc, argv, &opts);
init_revisions(opts.revs);
sequencer_pick_revisions(&opts);
This patch does not intend to make any functional changes. Check
with:
$ git blame -s -C HEAD^..HEAD -- sequencer.c | grep -C3 '^[^^]'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
REVERT and CHERRY_PICK and are unsuitable names for an enumerator in a
public interface, because they are generic enough to be likely to
clash with identifiers with other meanings. Rename to REPLAY_REVERT
and REPLAY_PICK as preparation for exposing them.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason why the trailing slash is needed is obvious. refs/stash and
HEAD are not namespace, but complete refs. Do full string compare on them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/ref-api-less-extra-refs:
write_head_info(): handle "extra refs" locally
show_ref(): remove unused "flag" and "cb_data" arguments
receive-pack: move more work into write_head_info()
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been carefully choosing feature names used in the protocol
extensions so that the vocabulary does not contain a word that is a
substring of another word, so it is not a real problem, but we have
recently added "quiet" feature word, which would mean we cannot later
add some other word with "quiet" (e.g. "quiet-push"), which is awkward.
Let's make sure that we can eventually be able to do so by teaching the
clients and servers that feature words consist of non whitespace
letters. This parser also allows us to later add features with parameters
e.g. "feature=1.5" (parameter values need to be quoted for whitespaces,
but we will worry about the detauls when we do introduce them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
The old code basically did:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
add_extra_ref(".have", sha1)
for each ref (including real refs and extra refs):
show_ref(refname, sha1)
But there is no need to stuff the alternate refs in extra_refs; we can
call show_ref() directly when iterating over the array, then handle
real refs separately. So change the code to:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
show_ref(".have", sha1)
for each ref (this now only includes real refs):
show_ref(refname, sha1)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is not used as a callback, so it doesn't need these
arguments. Also change its return type to void.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move some more code from the calling site into write_head_info(), and
inline add_alternate_refs() there. (Some more simplification is
coming, and it is easier if all this code is in the same place.)
Move some helper functions to avoid the need for forward declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They both use the extended headers in commit objects, and the former has
necessary infrastructure to show them that is useful to view the result of
the latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* ab/sun-studio-portability:
Appease Sun Studio by renaming "tmpfile"
Fix a bitwise negation assignment issue spotted by Sun Studio
Fix an enum assignment issue spotted by Sun Studio
* rs/diff-tree-combined-clean-up:
submodule: use diff_tree_combined_merge() instead of diff_tree_combined()
pass struct commit to diff_tree_combined_merge()
use struct sha1_array in diff_tree_combined()
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Advice messages are by definition meant for human end-users, and prime
candidates for i18n/l10n. They tend to also be more verbose to be helpful,
and need to be longer than just one line.
Although we do not have parameterized multi-line advice messages yet, once
we do, we cannot emit such a message like this:
advise(_("Please rename %s to something else"), gostak);
advise(_("so that we can avoid distimming %s unnecessarily."), doshes);
because some translations may need to have the replacement of 'gostak' on
the second line (or 'doshes' on the first line). Some languages may even
need to use three lines in order to fit the same message within a
reasonable width.
Instead, it has to be a single advise() construct, like this:
advise(_("Please rename %s to something else\n"
"so that we can avoid distimming %s unnecessarily."),
gostak, doshes);
Update the advise() function and its existing callers to
- take a format string that can be multi-line and translatable as a
whole;
- use the string and the parameters to form a localized message; and
- show each line in the result with the localization of the "hint: ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"abbrev" and "commit_format" in struct rev_info get initialized in
init_revisions - no need to reinit in cmd_log_init_defaults.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier ed7a42a (commit: teach --amend to carry forward extra headers,
2011-11-08) broke "git merge/pull; edit to fix conflict; git commit"
workflow by forgetting that commit_tree_extended() takes the whole extra
header list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Measurements by various people have shown that grepping in parallel is
not beneficial when the object store is involved. For example, with a
simple regex:
Threads | --cached case | worktree case
----------------------------------------------------------------
8 (default) | 2.88u 0.21s 0:02.94real | 0.19u 0.32s 0:00.16real
4 | 2.89u 0.29s 0:02.99real | 0.16u 0.34s 0:00.17real
2 | 2.83u 0.36s 0:02.87real | 0.18u 0.32s 0:00.26real
NO_PTHREADS | 2.16u 0.08s 0:02.25real | 0.12u 0.17s 0:00.31real
This happens because all the threads contend on read_sha1_mutex almost
all of the time. A more complex regex allows the threads to do more
work in parallel, but as Jeff King found out, the "super boost" (much
higher clock when only one core is active) feature of recent CPUs
still causes the unthreaded case to win by a large margin.
So until the pack machinery allows unthreaded access, we disable
grep's threading in all but the worktree case.
Helped-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lazily load the userdiff attributes in match_funcname(). Use a
separate mutex around this loading to protect the (not thread-safe)
attributes machinery. This lets us re-enable threading with -p and
-W while reducing the overhead caused by looking up attributes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_todo() calls get_message(), but uses only the subject line of
the commit message. As a minor optimization, save work and
unnecessary memory allocations by using find_commit_subject() instead.
Also, remove the unnecessary check on cur->item->buffer: the
lookup_commit_reference() call in parse_insn_line() has already made
sure of this.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerate extra spaces and tabs as part of the the field separator in
'.git/sequencer/todo', for people with fat fingers.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the instruction sheet format subtly so that the subject of the
commit message that follows the object name is optional. As a result,
an instruction sheet like this is now perfectly valid:
pick 35b0426
pick fbd5bbcbc2e
pick 7362160f
While at it, also fix a bug introduced by 5a5d80f4 (revert: Introduce
--continue to continue the operation, 2011-08-04) that failed to read
lines that are too long to fit on the commit-id-shaped buffer we
currently use; eliminate the need for the buffer altogether. In
addition to literal SHA-1 hexes, you can now safely use expressions
like the following in the instruction sheet:
featurebranch~4
rr/revert-cherry-pick-continue^2~12@{12 days ago}
[jc: simplify parsing]
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory allocated to the fields of msg by get_message() isn't freed.
This is potentially a big leak, because fresh memory is allocated to
store the commit message for each commit. Fix this using
free_message().
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wan't a way for commit_tree() to notice if the message the caller
prepared contained a NUL byte, as it did not take the length of the
message as a parameter. Use a pointer to a strbuf instead, so that we can
either choose to allow low-level plumbing commands to make commits that
contain NUL byte in its message, or forbid NUL everywhere by adding the
check in commit_tree(), in later patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc 4.6.2 (there may be others) does not realize that the variable "mode"
can never be used uninitialized in this function and issues a false warning
under -Wuninitialized option.
Squelch it with an unnecessary initialization; it is not like a single
assignment matters to the performance in this codepath that writes out
to the filesystem with checkout_entry() anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
When showing the raw timestamp, we format the numeric
seconds-since-epoch into a buffer, followed by the timezone
string. This string has come straight from the commit
object. A well-formed object should have a timezone string
of only a few bytes, but we could be operating on data
pushed by a malicious user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.
Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.
This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:
refs/foo/refs/heads/master
refs/heads/master
asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.
As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:
1. Through the transport code (i.e., via git-fetch)
2. On the command-line of git-fetch-pack
In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.
In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).
Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell the user what this command is intended for, and expand the
description of what it does.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asks us to force a mv and overwrite the
destination, we print a warning. However, since a typical
use would be:
$ git mv one two
fatal: destination exists, source=one, destination=two
$ git mv -f one two
warning: overwriting 'two'
this warning is just noise. We already know we're
overwriting; that's why we gave -f!
This patch silences the warning unless "--verbose" is given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to "git mv" over an existing file, the error
message is fairly informative:
$ git mv one two
fatal: destination exists, source=one, destination=two
When the user forces the overwrite, we give a warning:
$ git mv -f one two
warning: destination exists; will overwrite!
This is less informative, but still sufficient in the simple
rename case, as there is only one rename happening.
But when moving files from one directory to another, it
becomes useless:
$ mkdir three
$ touch one two three/one
$ git add .
$ git mv one two three
fatal: destination exists, source=one, destination=three/one
$ git mv -f one two three
warning: destination exists; will overwrite!
The first message is helpful, but the second one gives us no
clue about what was overwritten. Let's mention the name of
the destination file:
$ git mv -f one two three
warning: overwriting 'three/one'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git reset" no longer implicitly removes .git/sequencer that
the operator may or may not have wanted to keep, the logic to write a
backup copy of .git/sequencer and remove it when stale is not needed
any more. Simplify the sequencer API and repository layout by
dropping it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes pick_revisions() a little shorter and easier to read
straight through.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to "git mv" multiple files onto another
non-directory file, you confusingly get the "usage" message:
$ touch one two three
$ git add .
$ git mv one two three
usage: git mv [options] <source>... <destination>
[...]
From the user's perspective, that makes no sense. They just
gave parameters that exactly match that usage!
This behavior dates back to the original C version of "git
mv", which had a usage message like:
usage: git mv (<source> <destination> | <source>... <destination>)
This was slightly less confusing, because it at least
mentions that there are two ways to invoke (but it still
isn't clear why what the user provided doesn't work).
Instead, let's show an error message like:
$ git mv one two three
fatal: destination 'three' is not a directory
We could leave the usage message in place, too, but it
doesn't actually help here. It contains no hints that there
are two forms, nor that multi-file form requires that the
endpoint be a directory. So it just becomes useless noise
that distracts from the real error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a verbose flag has been here since "git mv" was
converted to C many years ago, but actually getting the "-v"
flag from the command line was accidentally lost in the
transition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the follow up of c689332 (Convert many resolve_ref() calls to
read_ref*() and ref_exists() - 2011-11-13). See the said commit for
rationale.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we print a status table like:
From url
* [new branch] foo -> origin/foo
We create this table in a static buffer using sprintf. If
the remote refnames are long, they can overflow this buffer
and smash the stack.
Instead, let's use a strbuf to build the string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Copy resolve_ref() return value for longer use
Convert many resolve_ref() calls to read_ref*() and ref_exists()
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
refs.c
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
Normally git tag strips tag message lines starting with '#', trailing
spaces from every line and empty lines from the beginning and end.
--cleanup allows to select different cleanup modes for tag message.
It provides the same interface as --cleanup option in git-commit.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making fixes to the contents to be committed, it is not unusual to
update the current commit without rewording the message. Idioms to tell
"commit --amend" that we do not need an editor have been:
$ EDITOR=: git commit --amend
$ git commit --amend -C HEAD
but that was only because a more natural "--no-edit" option in
$ git commit --amend --no-edit
was not honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of --mixed and --hard, we throw away the old index and
rebuild everything from the tree argument (or HEAD). So we have an
opportunity here to fill in the cache-tree data, just as read-tree
did.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In prepare_index(), we refresh the index, and then write it to disk if
this changed the index data. After running hooks we re-read the index
and compute the root tree sha1 with the cache-tree machinery.
This gives us a mostly free opportunity to write up-to-date cache-tree
data: we can compute it in prepare_index() immediately before writing
the index to disk.
If we do this, we were going to write the index anyway, and the later
cache-tree update has no further work to do. If we don't do it, we
don't do any extra work, though we still don't have have cache-tree
data after the commit.
The only case that suffers badly is when the pre-commit hook changes
many trees in the index. I'm writing this off as highly unusual.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll need to safely create or update the cache-tree data of the_index
from other places. While at it, give it an argument that lets us
silence the messages produced by unmerged entries (which prevent it
from working).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The content level merge machinery ll_merge() is prepared to merge
correctly in "both sides added differently" case by using an empty blob as
if it were the common ancestor. "checkout -m" could do the same, but didn't
bother supporting it and instead insisted on having all three stages.
Reported-by: Pete Harlan
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
