If the number gets too high for an int, weird things may happen, as
signed overflows are undefined. Add a test to show this; rev-parse
"sucessfully" interprets 100000000000000000000000000000000 to be the
same as 0, at least on x64 with GCC 9.2.1 and Clang 8.0.1, which is
obviously bogus.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse:oid filter has two error modes: we might fail to resolve the
name to an OID, or we might fail to parse the contents of that OID. In
the latter case, let's give a less generic error message, and mention
the OID we did find.
While we're here, let's also mark both messages as translatable.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter code has two steps to its initialization:
1. parse_list_objects_filter() makes sure the spec is a filter we know
about and is syntactically correct. This step is done by "rev-list"
or "upload-pack" that is going to apply a filter, but also by "git
clone" or "git fetch" before they send the spec across the wire.
2. list_objects_filter__init() runs the type-specific initialization
(using function pointers established in step 1). This happens at
the start of traverse_commit_list_filtered(), when we're about to
actually use the filter.
It's a good idea to parse as much as we can in step 1, in order to catch
problems early (e.g., a blob size limit that isn't a number). But one
thing we _shouldn't_ do is resolve any oids at that step (e.g., for
sparse-file contents specified by oid). In the case of a fetch, the oid
has to be resolved on the remote side.
The current code does resolve the oid during the parse phase, but
ignores any error (which we must do, because we might just be sending
the spec across the wire). This leads to two bugs:
- if we're not in a repository (e.g., because it's git-clone parsing
the spec), then we trigger a BUG() trying to resolve the name
- if we did hit the error case, we still have to notice that later and
bail. The code path in rev-list handles this, but the one in
upload-pack does not, leading to a segfault.
We can fix both by moving the oid resolution into the sparse-oid init
function. At that point we know we have a repository (because we're
about to traverse), and handling the error there fixes the segfault.
As a bonus, we can drop the NULL sparse_oid_value check in rev-list,
since this is now handled in the sparse-oid-filter init function.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test in t5317 that "sparse:oid" filters work with rev-list, but
there's no coverage at all confirming that they work with a fetch or
clone (and in fact, there are several bugs). Let's do a basic test that
a clone fetches the correct objects.
[jk: extracted from Jon's earlier fix patches. I also simplified the
setup down to a single sparse file, and I added checks that we got the
right blobs]
Signed-off-by: Jon Simons <jon@jonsimons.org>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client has asked for certain shallow options like
"deepen-since", we do a custom rev-list walk that pretends to be
shallow. Before doing so, we have to disable the commit-graph, since it
is not compatible with the shallow view of the repository. That's
handled by 829a321569 (commit-graph: close_commit_graph before shallow
walk, 2018-08-20). That commit literally closes and frees our
repo->objects->commit_graph struct.
That creates an interesting problem for commits that have _already_ been
parsed using the commit graph. Their commit->object.parsed flag is set,
their commit->graph_pos is set, but their commit->maybe_tree may still
be NULL. When somebody later calls repo_get_commit_tree(), we see that
we haven't loaded the tree oid yet and try to get it from the commit
graph. But since it has been freed, we segfault!
So the root of the issue is a data dependency between the commit's
lazy-load of the tree oid and the fact that the commit graph can go
away mid-process. How can we resolve it?
There are a couple of general approaches:
1. The obvious answer is to avoid loading the tree from the graph when
we see that it's NULL. But then what do we return for the tree oid?
If we return NULL, our caller in do_traverse() will rightly
complain that we have no tree. We'd have to fallback to loading the
actual commit object and re-parsing it. That requires teaching
parse_commit_buffer() to understand re-parsing (i.e., not starting
from a clean slate and not leaking any allocated bits like parent
list pointers).
2. When we close the commit graph, walk through the set of in-memory
objects and clear any graph_pos pointers. But this means we also
have to "unparse" any such commits so that we know they still need
to open the commit object to fill in their trees. So it's no less
complicated than (1), and is more expensive (since we clear objects
we might not later need).
3. Stop freeing the commit-graph struct. Continue to let it be used
for lazy-loads of tree oids, but let upload-pack specify that it
shouldn't be used for further commit parsing.
4. Push the whole shallow rev-list out to its own sub-process, with
the commit-graph disabled from the start, giving it a clean memory
space to work from.
I've chosen (3) here. Options (1) and (2) would work, but are
non-trivial to implement. Option (4) is more expensive, and I'm not sure
how complicated it is (shelling out for the actual rev-list part is
easy, but we do then parse the resulting commits internally, and I'm not
clear which parts need to be handling shallow-ness).
The new test in t5500 triggers this segfault, but see the comments there
for how horribly intimate it has to be with how both upload-pack and
commit graphs work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b841d4ff43 (Add `human` format to test-tool, 2019-01-28) added
a get_time() function which allows $GIT_TEST_DATE_NOW in the
environment to override the current time. So we no longer need to
interpret that variable in cmd__date().
Therefore, we can stop passing the "now" parameter down through the
date functions, since nobody uses them. Note that we do need to make
sure all of the previous callers that took a "now" parameter are
correctly using get_time().
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache-tree datastructure is used to speed up the comparison
between the HEAD and the index, and when the index is updated by
a cherry-pick (for example), a tree object that would represent
the paths in the index in a directory is constructed in-core, to
see if such a tree object exists already in the object store.
When the lazy-fetch mechanism was introduced, we converted this
"does the tree exist?" check into an "if it does not, and if we
lazily cloned, see if the remote has it" call by mistake. Since
the whole point of this check is to repair the cache-tree by
recording an already existing tree object opportunistically, we
shouldn't even try to fetch one from the remote.
Pass the OBJECT_INFO_SKIP_FETCH_OBJECT flag to make sure we only
check for existence in the local object store without triggering the
lazy fetch mechanism.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
[jc: rewritten the proposed log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git am" based backend of "git rebase" ignored the result of
updating ".gitattributes" done in one step when replaying
subsequent steps.
* bc/reread-attributes-during-rebase:
am: reload .gitattributes after patching it
path: add a function to check for path suffix
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
On-demand object fetching in lazy clone incorrectly tried to fetch
commits from submodule projects, while still working in the
superproject, which has been corrected.
* jt/diff-lazy-fetch-submodule-fix:
diff: skip GITLINK when lazy fetching missing objs
"git fetch" learned "--set-upstream" option to help those who first
clone from their private fork they intend to push to, add the true
upstream via "git remote add" and then "git fetch" from it.
* cb/fetch-set-upstream:
pull, fetch: add --set-upstream option
"git archive" recorded incorrect length in extended pax header in
some corner cases, which has been corrected.
* rs/pax-extended-header-length-fix:
archive-tar: turn length miscalculation warning into BUG
archive-tar: use size_t in strbuf_append_ext_header()
archive-tar: fix pax extended header length calculation
archive-tar: report wrong pax extended header length
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The command line parser learned "--end-of-options" notation; the
standard convention for scripters to have hardcoded set of options
first on the command line, and force the command to treat end-user
input as non-options, has been to use "--" as the delimiter, but
that would not work for commands that use "--" as a delimiter
between revs and pathspec.
* jk/eoo:
gitcli: document --end-of-options
parse-options: allow --end-of-options as a synonym for "--"
revision: allow --end-of-options to end option parsing
Further clean-up of the initialization code.
* jk/repo-init-cleanup:
config: stop checking whether the_repository is NULL
common-main: delay trace2 initialization
t1309: use short branch name in includeIf.onbranch test
Load a default set of ref name decorations at the first lookup. This
frees direct and indirect callers from doing so. They can still do it
if they want to use a filter or are interested in full decorations
instead of the default short ones -- the first load_ref_decorations()
call wins.
This means that the load in builtin/log.c::cmd_log_init_finish() is
respected even if --simplify-by-decoration is given, as the previously
dominating earlier load in handle_revision_opt() is gone. So a filter
given with --decorate-refs-exclude is used for simplification in that
case, as expected.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Demonstrate that a decoration filter given with --decorate-refs-exclude
is inadvertently overruled by --simplify-by-decoration.
Reported-by: Étienne SERVAIS <etienne.servais@voucoux.fr>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment as in the previous commit to handle an unchecked
call to 'get_commit_tree_oid()'. Previously, a NULL return value from
this function would be immediately dereferenced with '->hash', and then
cause a segfault.
Before dereferencing to access the 'hash' member, check the return value
of 'get_commit_tree_oid()' to make sure that it is not NULL.
To make this check correct, a related change is also needed in
'commit.c', which is to check the return value of 'get_commit_tree'
before taking its address. If 'get_commit_tree' returns NULL, we
encounter an undefined behavior when taking the address of the return
value of 'get_commit_tree' and then taking '->object.oid'. (On my system,
this is memory address 0x8, which is obviously wrong).
Fix this by making sure that 'get_commit_tree' returns something
non-NULL before digging through a structure that is not there, thus
preventing a segfault down the line in the commit graph code.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To write a commit graph chunk, 'write_graph_chunk_data()' takes a list
of commits to write and parses each one before writing the necessary
data, and continuing on to the next commit in the list.
Since the majority of these commits are not parsed ahead of time (an
exception is made for the *last* commit in the list, which is parsed
early within 'copy_oids_to_commits'), it is possible that calling
'parse_commit_no_graph()' on them may return an error. Failing to catch
these errors before de-referencing later calls can result in a undefined
memory access and a SIGSEGV.
One such example of this is 'get_commit_tree_oid()', which expects a
parsed object as its input (in this case, the commit-graph code passes
'*list'). If '*list' causes a parse error, the subsequent call will
fail.
Prevent such an issue by checking the return value of
'parse_commit_no_graph()' to avoid passing an unparsed object to a
function which expects a parsed object, thus preventing a segfault.
It is worth noting that this fix is really skirting around the issue in
object.c's 'parse_object()', which makes it difficult to tell how
corrupt an object is without digging into it. Presumably one could
change the meaning of 'parse_object' returns, but this would require
adjusting each callsite accordingly. Instead of that, add an additional
check to the object parsed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking 'git commit-graph' in a corrupt repository, one can cause
a segfault when ancestral commits are corrupt in one way or another.
This is due to two function calls in the 'commit-graph.c' code that may
return NULL, but are not checked for NULL-ness before dereferencing.
Before fixing the bug, introduce two failing tests that demonstrate the
problem. The first test corrupts an ancestral commit's parent to point
to a non-existent object. The second test instead corrupts an ancestral
tree by removing the 'tree' information entirely from the commit. Both
of these cases cause segfaults, each at different lines.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing 'git rebase --autostash <upstream> <master>' with a dirty worktree
a 'HEAD is now at ...' message is emitted, which is pointless as it refers to
the old active branch which isn't actually moved.
This commit removes the 'HEAD is now at...' message.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following scenario:
git checkout not-the-master
work work work
git rebase --autostash upstream master
Here 'rebase --autostash <upstream> <branch>' incorrectly moves the
active branch (not-the-master) to master (before the rebase).
The expected behavior: (58794775:/git-rebase.sh:526)
AUTOSTASH=$(git stash create autostash)
git reset --hard
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
The actual behavior: (6defce2b:/builtin/rebase.c:1062)
AUTOSTASH=$(git stash create autostash)
git reset --hard master
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
This commit reinstates the 'legacy script' behavior as introduced with
58794775: rebase: implement --[no-]autostash and rebase.autostash
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many test scripts, there are bespoke definitions of the single quote
that are some variation of this:
SQ="'"
Define a common $SQ variable in test-lib.sh and replace all usages of
these bespoke variables with the common one.
This change was done by running `git grep =\"\'\" t/` and
`git grep =\\\\\'` and manually changing the resulting definitions and
corresponding usages.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early in the function we set "namelen = strlen(name)" if "name" is
non-NULL. Later, we use "namelen" only if "name" is non-NULL. However,
it's hard to immediately see this, and it seems to confuse gcc 9.2.1
(with "-flto" interestingly, though all of the involved logic is in
inline functions; it also triggers when building with ASan).
Let's simplify the code and remove the variable entirely. There's only
one use of namelen anyway, so we can just call strlen() then. It's true
this is in a loop, so we might execute strlen() more often. But:
- this is test code that only ever loops twice in our test suite (we
do loop 1000 times in a t/perf test, but without using this option).
- a decent compiler ought to be able to hoist that out of the loop
anyway (though I wouldn't count on gcc 9.2.1 doing so!)
Reported-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time the GIT_SVN_TEST_HTTPD environment variable needed to
be set to enable SVN HTTP tests [1].
Then 3b072c577b (tests: replace test_tristate with "git env--helper",
2019-06-21) came along, and attempted to turn GIT_SVN_TEST_HTTPD into
a bool, but while doing so it mistyped the variable name, and started
to check GIT_TEST_HTTPD instead. Consequently, if someone explicitly
set GIT_TEST_HTTPD to true and has only the general 'git-svn'
dependencies installed but not the Subversion server modules for
Apache (libapache2-mod-svn), then a couple of 'git-svn' tests fail,
because they can't start httpd due to the missing module.
We could simply fix this by checking the GIT_SVN_TEST_HTTPD
variablewith 'git env--helper', but notice that the name of this
variable doesn't conform to our usual GIT_TEST_* convention.
So let's check the GIT_TEST_SVN_HTTPD instead.
[1] a8a5d25118 (git svn: migrate tests to use lib-httpd, 2016-07-23)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9902 had a list of three random porcelain commands as a sanity check,
one of which was filter-branch. Since we are recommending people not
use filter-branch, let's update this test to use rebase instead of
filter-branch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t6006.71 ("oneline with empty message") was creating two commits
with simple commit messages, and then running filter-branch to rewrite
the commit messages to be "empty". This test was introduced in commit
1fb5fdd25f ("rev-list: fix --pretty=oneline with empty message",
2010-03-21) and written this way because the --allow-empty-message
option to git commit did not exist at the time.
However, the filter-branch invocation used differed slightly from
--allow-empty-message in that it would have a commit message consisting
solely of a single newline, and as such was not testing what the
original commit intended to test. Since both a truly empty commit
message and a commit message with a single linefeed could trigger the
original bug, modify the test slightly to include an example of each.
Despite only being one piece of the 71st test and there being 73 tests
overall, this small change to just this one test speeds up the overall
execution time of t6006 (as measured by the best of 3 runs of `time
./t6006-rev-list-format.sh`) by about 11% on Linux, 13% on Mac, and
about 15% on Windows.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are two ways where the return codes of Git commands are
lost. The first way is when a command is in the upstream of a pipe. In a
pipe, only the return code of the last command is used. Thus, all other
commands will have their return codes masked. Rewrite pipes so that
there are no Git commands upstream.
The other way is when a command is in a non-assignment subshell. The
return code will be lost in favour of the surrounding command's. Rewrite
instances of this such that Git commands output to a file and
surrounding commands only call subshells with non-Git commands.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In check_threading(), there was a Git command in the upstream of a pipe.
In order to not lose its status code, it was saved into a file. However,
this may be confusing so rewrite to redirect IO to file. This allows us
to directly use the conventional &&-chain.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of `cnt=$(... | wc -l) && test $cnt = N` into uses
of `test_line_count()`.
While we're at it, convert one instance of a Git command upstream of a
pipe into two commands. This prevents a failure of a Git command from
being masked since only the return code of the last member of the pipe
is shown.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we were using a redirection operator to feed input into
sed. However, since sed is capable of opening its own files, make sed
open its own files instead of redirecting input into it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since output is silenced when running without `-v` and debugging output
is useful with `-v`, remove redirections to /dev/null as it is not
useful.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention is to use indentable here-docs within test cases so that
the here-docs line up with the rest of the code within the test case.
Change here-docs from `<<\EOF` to `<<-\EOF` so that they can be indented
along with the rest of the test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove these
spaces wherever they appear.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention is for test case names to be written between
single-quotes. Change all double-quoted test case names to single-quotes
except for one test case name that uses a sq for a contraction.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention for test cases is for the closing sq to be on its
own line. Move the sq onto its own line for cases that do not conform to
this style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For test cases, the usual convention is to name expected output files
"expect", not "expected". Replace all instances of "expected" with
"expect", except for one case where the "expected" is used as the name
of a test case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few test scripts assign a single LF to $LF, but that is already
given by test-lib.sh to everybody.
Remove the unnecessary reassignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export and fast-import can easily handle the simple rewrite that
was being done by filter-branch, and should be faster on systems with a
slow fork. Measuring the overall time taken for all of t3427 (not just
the difference between filter-branch and fast-export/fast-import) shows
a speedup of about 5% on Linux and 11% on Mac.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying multiple patches with git am, or when rebasing using the
am backend, it's possible that one of our patches has updated a
gitattributes file. Currently, we cache this information, so if a
file in a subsequent patch has attributes applied, the file will be
written out with the attributes in place as of the time we started the
rebase or am operation, not with the attributes applied by the previous
patch. This problem does not occur when using the -m or -i flags to
rebase.
To ensure we write the correct data into the working tree, expire the
cache after each patch that touches a path ending in ".gitattributes".
Since we load these attributes in multiple separate files, we must
expire them accordingly.
Verify that both the am and rebase code paths work correctly, including
the conflict marker size with am -3.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature is now on by default, and is being
written during 'git gc' by default. Typically, Git only writes
a commit-graph when a 'git gc --auto' command passes the gc.auto
setting to actualy do work. This means that a commit-graph will
typically fall behind the commits that are being used every day.
To stay updated with the latest commits, add a step to 'git
fetch' to write a commit-graph after fetching new objects. The
fetch.writeCommitGraph config setting enables writing a split
commit-graph, so on average the cost of writing this file is
very small. Occasionally, the commit-graph chain will collapse
to a single level, and this could be slow for very large repos.
For additional use, adjust the default to be true when
feature.experimental is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushes with --all, or refspecs are disallowed when --mirror is given
to 'git push', or when 'remote.<name>.mirror' is set in the config of
the repository, because they can have surprising
effects. 800a4ab399 ("push: check for errors earlier", 2018-05-16)
refactored this code to do that check earlier, so we can explicitly
check for the presence of flags, instead of their sideeffects.
However when 'remote.<name>.mirror' is set in the config, the
TRANSPORT_PUSH_MIRROR flag would only be set after we calling
'do_push()', so the checks would miss it entirely.
This leads to surprises for users [*1*].
Fix this by making sure we set the flag (if appropriate) before
checking for compatibility of the various options.
*1*: https://twitter.com/FiloSottile/status/1163918701462249472
Reported-by: Filippo Valsorda <filippo@ml.filippo.io>
Helped-by: Saleem Rashid
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests rebasing a linear branch topology to linear rebase tests
added in 2aad7cace2 ("add simple tests of consistency across rebase
types", 2013-06-06).
These tests are duplicates of two surrounding tests that do the same
with tags pointing to the same objects. Right now there's no change in
behavior being introduced, but as we'll see in a subsequent change
rebase can have different behaviors when working implicitly with
remote tracking branches.
While I'm at it add a --fork-point test, strictly speaking this is
redundant to the existing '' test, as no argument to rebase implies
--fork-point. But now it's easier to grep for tests that explicitly
stress --fork-point.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we rebased with a --fork-point invocation where the
fork-point wasn't empty, we would be setting options.restrict_revision.
The fast-forward logic would automatically declare that the rebase was
not fast-forwardable if it was set. However, this was painting with a
very broad brush.
Refine the logic so that we can fast-forward in the case where the
restricted revision is equal to the merge base, since we stop rebasing
at the merge base anyway.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more stress tests for the can_fast_forward() case in
rebase.c. These tests are getting rather verbose, but now we can see
under --ff and --no-ff whether we skip work, or whether we're forced
to run the rebase.
These tests aren't supposed to endorse the status quo, just test for
what we're currently doing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reverting or cherry-picking, one of the options we can pass the
sequencer is `--skip`. However, unlike rebasing, `--skip` is not
mentioned as a possible option in the status message. Mention it so that
users are more aware of their options.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "same head" introduced in the preceding commit to check whether
the rebase.c code lands in the can_fast_forward() case in, and thus
prints out an "is up to date" and aborts early.
In some of these cases we make it past that and to "rewinding head",
then do a rebase, only to find out there's nothing to change so HEAD
stays at the same OID.
These tests presumed these two cases were the same thing. In terms of
where HEAD ends up they are, but we're not only interested in rebase
semantics, but also whether or not we're needlessly doing work when we
could avoid it entirely.
I'm adding "same" and "diff" here because I'll follow-up and add
--no-ff tests, where some of those will be "diff"-erent, so add the
"diff" code already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase is run on a branch that can be fast-forwarded, this should
automatically be done. Create test to ensure this behavior happens.
There are some cases that currently don't pass. The first case is where
a feature and master have diverged, running
"git rebase master... master" causes a full rebase to happen even though
a fast-forward should happen.
The second case is when we are doing "git rebase --fork-point" and a
fork-point commit is found. Once again, a full rebase happens even
though a fast-forward should happen.
Mark these cases as failure so we can fix it later.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clean -fd' must not delete an untracked directory if it belongs
to a different Git repository or worktree. Unfortunately, if a
'.gitignore' rule in the outer repository happens to match a file in a
nested repository or worktree, then something goes awry and 'git clean
-fd' does delete the content of the nested repository's worktree
except that ignored file, potentially leading to data loss.
Add a test to 't7300-clean.sh' to demonstrate this breakage.
This issue is a regression introduced in 6b1db43109 (clean: teach
clean -d to preserve ignored paths, 2017-05-23).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the parser to accept file://server/share/repo in the way that
Windows users expect it to be parsed who are used to referring to file
shares by UNC paths of the form \\server\share\folder.
[jes: tightened check to avoid handling file://C:/some/path as a UNC
path.]
This closes https://github.com/git-for-windows/git/issues/1264.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding object IDs, compute them and use those in the
comparison. Note that the comparison code ignores the actual object
IDs, but does check that they're the right size, so computing them is
the easiest way to ensure that they are.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the hard-coded object IDs and use test_oid to provide values
for both SHA-1 and SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use $ZERO_OID instead of hard-coding a fixed size all-zeros object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abstract away the SHA-1-specific constants by sanitizing diff output to
remove the index lines, since it's clear from the assertions in question
that we are not interested in the specific object IDs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only transport that does not allow fetch() to be called before
get_refs_list() is the bundle transport. Clean up the code by teaching
the bundle transport the ability to do this, and removing support for
transports that don't support this order of invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e70a3030e7 ("fetch: do not list refs if fetching only hashes",
2018-10-07) and its ancestors taught Git, as an optimization, to skip
the ls-refs step when it is not necessary during a protocol v2 fetch
(for example, when lazy fetching a missing object in a partial clone, or
when running "git fetch --no-tags <remote> <SHA-1>"). But that was only
done for natively supported protocols; in particular, HTTP was not
supported.
Teach Git to skip ls-refs when using remote helpers that support connect
or stateless-connect. To do this, fetch() is made an acceptable entry
point. Because fetch() can now be the first function in the vtable
called, "get_helper(transport);" has to be added to the beginning of
that function to set the transport up (if not yet set up) before
process_connect() is invoked.
When fetch() is called, the transport could be taken over (this happens
if "connect" or "stateless-connect" is successfully run without any
"fallback" response), or not. If the transport is taken over, execution
continues like execution for natively supported protocols
(fetch_refs_via_pack() is executed, which will fetch refs using ls-refs
if needed). If not, the remote helper interface will invoke
get_refs_list() if it hasn't been invoked yet, preserving existing
behavior.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test & perf scripts must use unique numeric prefix, but a pair
shared the same number, which is fixed here.
* jk/perf-no-dups:
t/perf: rename duplicate-numbered test script
The first line of verbose output from each test piece now carries
the test name and number to help scanning with eyeballs.
* sg/show-failed-test-names:
tests: show the test name and number at the start of verbose output
t0000-basic: use realistic test script names in the verbose tests
The code to write commit-graph over given commit object names has
been made a bit more robust.
* sg/commit-graph-validate:
commit-graph: error out on invalid commit oids in 'write --stdin-commits'
commit-graph: turn a group of write-related macro flags into an enum
t5318-commit-graph: use 'test_expect_code'
"git checkout" and "git restore" to re-populate the index from a
tree-ish (typically HEAD) did not work correctly for a path that
was removed and then added again with the intent-to-add bit, when
the corresponding working tree file was empty. This has been
corrected.
* vn/restore-empty-ita-corner-case-fix:
restore: add test for deleted ita files
checkout.c: unstage empty deleted ita files
Test fix.
* sg/do-not-skip-non-httpd-tests:
t: warn against adding non-httpd-specific tests after sourcing 'lib-httpd'
t5703: run all non-httpd-specific tests before sourcing 'lib-httpd.sh'
t5510-fetch: run non-httpd-specific test before sourcing 'lib-httpd.sh'
"git grep --recurse-submodules" that looks at the working tree
files looked at the contents in the index in submodules, instead of
files in the working tree.
* mt/grep-submodules-working-tree:
grep: fix worktree case in submodules
In t0021.15 one of the things we are checking is that the clean filter
is run when checking out empty-branch. The clean filter needs to be
run to make sure there are no modifications on the file system for the
test.r file, and thus it isn't dangerous to overwrite it.
However in the current test setup it is not always necessary to run
the clean filter, and thus the test sometimes fails, as debug.log
isn't written.
This happens when test.r has an older mtime than the index itself.
That mtime is also recorded as stat data for test.r in the index, and
based on the heuristic we're using for index entries, git correctly
assumes this file is up-to-date.
Usually this test succeeds because the mtime of test.r is the same as
the mtime of the index. In this case test.r is racily clean, so git
actually checks the contents, for which the clean filter is run.
Fix the test by updating the mtime of test.r, so git is forced to
check the contents of the file, and the clean filter is run as the
test expects.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formatting $(taggername) on headerless tags such as v0.99 in Git
causes a SIGABRT with error "munmap_chunk(): invalid pointer",
because of an oversight in commit f0062d3b74 (ref-filter: free
item->value and item->value->s, 2018-10-19).
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux kernel receives many patches to the devicetree files each
release. The hunk header for those patches typically show nothing,
making it difficult to figure out what node is being modified without
applying the patch or opening the file and seeking to the context. Let's
add a builtin 'dts' pattern to git so that users can get better diff
output on dts files when they use the diff=dts driver.
The regex has been constructed based on the spec at devicetree.org[1]
and with some help from Johannes Sixt.
[1] https://github.com/devicetree-org/devicetree-specification/releases/latest
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With rename detection enabled the line-level log is able to trace the
evolution of line ranges across whole-file renames [1]. Alas, to
achieve that it uses the diff machinery very inefficiently, making the
operation very slow [2]. And since rename detection is enabled by
default, the line-level log is very slow by default.
When the line-level log processes a commit with rename detection
enabled, it currently does the following (see queue_diffs()):
1. Computes a full tree diff between the commit and (one of) its
parent(s), i.e. invokes diff_tree_oid() with an empty
'diffopt->pathspec'.
2. Checks whether any paths in the line ranges were modified.
3. Checks whether any modified paths in the line ranges are missing
in the parent commit's tree.
4. If there is such a missing path, then calls diffcore_std() to
figure out whether the path was indeed renamed based on the
previously computed full tree diff.
5. Continues doing stuff that are unrelated to the slowness.
So basically the line-level log computes a full tree diff for each
commit-parent pair in step (1) to be used for rename detection in step
(4) in the off chance that an interesting path is missing from the
parent.
Avoid these expensive and mostly unnecessary full tree diffs by
limiting the diffs to paths in the line ranges. This is much cheaper,
and makes step (2) unnecessary. If it turns out that an interesting
path is missing from the parent, then fall back and compute a full
tree diff, so the rename detection will still work.
Care must be taken when to update the pathspec used to limit the diff
in case of renames. A path might be renamed on one branch and
modified on several parallel running branches, and while processing
commits on these branches the line-level log might have to alternate
between looking at a path's new and old name. However, at any one
time there is only a single 'diffopt->pathspec'.
So add a step (0) to the above to ensure that the paths in the
pathspec match the paths in the line ranges associated with the
currently processed commit, and re-parse the pathspec from the paths
in the line ranges if they differ.
The new test cases include a specially crafted piece of history with
two merged branches and two files, where each branch modifies both
files, renames on of them, and then modifies both again. Then two
separate 'git log -L' invocations check the line-level log of each of
those two files, which ensures that at least one of those invocations
have to do that back-and-forth between the file's old and new name (no
matter which branch is traversed first). 't/t4211-line-log.sh'
already contains two tests involving renames, they don't don't trigger
this back-and-forth.
Avoiding these unnecessary full tree diffs can have huge impact on
performance, especially in big repositories with big trees and mergy
history. Tracing the evolution of a function through the whole
history:
# git.git
$ time git --no-pager log -L:read_alternate_refs:sha1-file.c v2.23.0
Before:
real 0m8.874s
user 0m8.816s
sys 0m0.057s
After:
real 0m2.516s
user 0m2.456s
sys 0m0.060s
# linux.git
$ time ~/src/git/git --no-pager log \
-L:build_restore_work_registers:arch/mips/mm/tlbex.c v5.2
Before:
real 3m50.033s
user 3m48.041s
sys 0m0.300s
After:
real 0m2.599s
user 0m2.466s
sys 0m0.157s
That's just over 88x speedup.
[1] Line-level log's rename following is quite similar to 'git log
--follow path', with the notable differences that it does handle
multiple paths at once as well, and that it doesn't show the
commit performing the rename if it's an exact rename.
[2] This slowness might not have been apparent initially, because back
when the line-level log feature was introduced rename detection
was not yet enabled by default; 12da1d1f6f (Implement line-history
search (git log -L), 2013-03-28) and 5404c116aa (diff: activate
diff.renames by default, 2016-02-25).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-08),
diff was taught to batch the fetching of missing objects when operating
on a partial clone, but was not taught to refrain from fetching
GITLINKs. Teach diff to check if an object is a GITLINK before including
it in the set to be fetched.
(As stated in the commit message of that commit, unpack-trees was also
taught a similar thing prior, but unpack-trees correctly checks for
GITLINK before including objects in the set to be fetched.)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace references to several hard-coded object IDs with a variable
referring to the generated commit. Avoid matching on exact character
positions, which will be different depending on the hash in use. In the
test for a valid object ID, use an obviously invalid one from the lookup
table.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding a fixed length invalid object ID in the test,
compute one using the lookup tables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses a hard-coded object ID to ensure that the result of
cherry-pick --ff is correct. Use test_oid to make this work for both
SHA-1 and SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute the object IDs used in the todo list instead of hard-coding
them.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Add a use of $EMPTY_TREE instead of a
hard-coded value. Remove a comment about hard-coded hashes which is no
longer applicable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Convert some single-line heredocs into inline
uses of echo now that they can be expressed succinctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding 40-character shell patterns, use grep to
determine if all of the paths have either zero or one levels of fanout,
as appropriate.
Note that the final test is implicitly dependent on the hash algorithm.
Depending on the algorithm in use, the fanout may or may not completely
compress. In its current state, this is not a problem, but it could be
if the hash algorithm changes again.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Move some invocations of test_commit around so
that we can compute the object IDs for these commits.
Compute several object IDs in the tests instead of using hard-coded
values so that the test works with any hash algorithm. Since the actual
values are sorted by the object ID of the object being annotated, sort
the expected values accordingly as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The various short object IDs in the range-diff output differ between
hash algorithms. Use test_oid_cache to look up values for both SHA-1
and SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --set-upstream option to git pull/fetch
which lets the user set the upstream configuration
(branch.<current-branch-name>.merge and
branch.<current-branch-name>.remote) for the current branch.
A typical use-case is:
git clone http://example.com/my-public-fork
git remote add main http://example.com/project-main-repo
git pull --set-upstream main master
or, instead of the last line:
git fetch --set-upstream main master
git merge # or git rebase
This is mostly equivalent to cloning project-main-repo (which sets
upsteam) and then "git remote add" my-public-fork, but may feel more
natural for people using a hosting system which allows forking from
the web UI.
This functionality is analog to "git push --set-upstream".
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Patch-edited-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we're confident our pax extended header calculation is correct,
turn the criticality of the assertion up to the maximum, from warning
right up to BUG. Simplify the test, as the stderr comparison step would
not be reached in case the BUG message is triggered.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pax extended header record starts with a decimal number. Its value
is the length of the whole record, including its own length.
The calculation of that number in strbuf_append_ext_header() is off by
one in case the length of the rest is close to a higher order of
magnitude. This affects paths and link targets a bit shorter than 1000,
10000, 100000 etc. characters -- paths with a length of up to 100 fit
into the tar header and don't need a pax extended header.
The mistake has been present since the function was added by ae64bbc18c
("tar-tree: Introduce write_entry()", 2006-03-25).
Account for digits added to len during the loop and keep incrementing
until we have enough space for len and the rest. The crucial change is
to check against the current value of len before each iteration, instead
of against its value before the loop.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extended header entries contain a length value that is a bit tricky to
calculate because it includes its own length (number of decimal digits)
as well. We get it wrong in corner cases. Add a check, report wrong
results as a warning and add a test for exercising it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'feature.experimental' setting includes config options that are
not committed to become defaults, but could use additional testing.
Update the following config settings to take new defaults, and to
use the repo_settings struct if not already using them:
* 'pack.useSparse=true'
* 'fetch.negotiationAlgorithm=skipping'
In the case of fetch.negotiationAlgorithm, the existing logic
would load the config option only when about to use the setting,
so had a die() statement on an unknown string value. This is
removed as now the config is parsed under prepare_repo_settings().
In general, this die() is probably misplaced and not valuable.
A test was removed that checked this die() statement executed.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The feature.manyFiles setting is suitable for repos with many
files in the working directory. By setting index.version=4 and
core.untrackedCache=true, commands such as 'git status' should
improve.
While adding this setting, modify the index version precedence
tests to check how this setting overrides the default for
index.version is unset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph feature has seen a lot of activity in the past
year or so since it was introduced. The feature is a critical
performance enhancement for medium- to large-sized repos, and
does not significantly hurt small repos.
Change the defaults for core.commitGraph and gc.writeCommitGraph
to true so users benefit from this feature by default.
There are several places in the test suite where the environment
variable GIT_TEST_COMMIT_GRAPH is disabled to avoid reading a
commit-graph, if it exists. The config option overrides the
environment, so swap these. Some GIT_TEST_COMMIT_GRAPH assignments
remain, and those are to avoid writing a commit-graph when a new
commit is created.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6501-freshen-objects.sh sends the standard error from
'git gc' to a file and verifies that it is empty. This
is intended as a way to ensure no warnings are written
during the operation. However, as the commit-graph is
added as a step to 'git gc', its progress will appear
in the output.
Pass the '-q' argument to avoid a failing test case
when progress is written.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing configuration sections and variable names for the stuck
argument of 'git clone --config=<TAB>' requires a bit of extra care
compared to doing the same for the unstuck argument of 'git clone
--config <TAB>', because we have to deal with that '--config=' being
part of the current word to be completed.
Add an option to the __git_complete_config_variable_name_and_value()
and in turn to the __git_complete_config_variable_name() helper
functions to specify the current section/variable name to be
completed, so they can be used even when completing the stuck argument
of '--config='.
__git_complete_config_variable_value() already has such an option, and
thus no further changes were necessary to complete possible values
after 'git clone --config=section.name=<TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' expects a configuration variable's name and value in
separate options, so we complete values as they stand on their own on
the command line. 'git -c', however, expects them in a single option
joined by a '=' character, so we should be able to complete values
when they are following 'section.name=' in the same word.
Add new options to the __git_complete_config_variable_value() function
to allow callers to specify the current word to be completed and the
configuration variable whose value is to be completed, and use these
to complete possible values after 'git -c 'section.name=<TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' expects a configuration variable's name and value in
separate arguments, so we let the __gitcomp() helper append a space
character to each variable name by default, like we do for most other
things (--options, refs, paths, etc.). 'git -c', however, expects
them in a single option joined by a '=' character, i.e.
'section.name=value', so we should append a '=' character to each
fully completed variable name, but no space, so the user can continue
typing the value right away.
Add an option to the __git_complete_config_variable_name() function to
allow callers to specify an alternate suffix to add, and use it to
append that '=' character to configuration variables. Update the
__gitcomp() helper function to not append a trailing space to any
completion words ending with a '=', not just to those option with a
stuck argument.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of configuration variables listed by the completion script
grew quite when we started to auto-generate it from the documentation
[1], so we now complete them in two steps: first we list only the
section names, then the rest [2]. To get the section names we simply
strip everything following the first dot in each variable name,
resulting in a lot of repeated section names, because most sections
contain more than one configuration variable. This is not a
correctness issue in practice, because Bash's completion facilities
remove all repetitions anyway, but these repetitions make testing a
bit harder.
Replace the small 'sed' script removing subsections and variable names
with an 'awk' script that does the same, and in addition removes any
repeated configuration sections as well (by first creating and filling
an associative array indexed by all encountered configuration
sections, and then iterating over this array and printing the indices,
i.e. the unique section names). This change makes the failing 'git
config - section' test in 't9902-completion.sh' pass.
Note that this changes the order of section names in the output, and
makes it downright undeterministic, but this is not an issue, because
Bash sorts them before presenting them to the user, and our completion
tests sort them as well before comparing with the expected output.
Yeah, it would be simpler and shorter to just append '| sort -u' to
that command, but that would incur the overhead of one more external
process and pipeline stage every time a user completes configuration
sections.
[1] e17ca92637 (completion: drop the hard coded list of config vars,
2018-05-26)
[2] f22f682695 (completion: complete general config vars in two steps,
2018-05-27)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patches will change/refactor the way we complete
configuration variable names and values, so add a few tests to cover
the basics, namely the completion of matching configuration sections,
full variable names, and their values.
Note that the test checking the completion of configuration sections
is currently failing, though it's not a sign of an actual bug. If a
section contains multiple variables, then that section is currently
repeated as many times as the number of variables in there. This is
not a correctness issue in practice, because Bash's completion
facilities remove all repetitions anyway. Consequently, we could list
all those repeated sections in the expected output of this test as
well, but then it would have to be updated whenever a new
configuration variable is added to those sections. Instead, list each
matching configuration section only once, mark the test as failing for
now, and the next patch will update the completion script to avoid
those repetitions.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two perf scripts numbered p5600, but with otherwise different
names ("clone-reference" versus "partial-clone"). We store timing
results in files named after the whole script, so internally we don't
get confused between the two. But "aggregate.perl" just prints the test
number for each result, giving multiple entries for "5600.3". It also
makes it impossible to skip one test but not the other with
GIT_SKIP_TESTS.
Let's renumber the one that appeared later (by date -- the source of the
problem is that the two were developed on independent branches). For the
non-perf test suite, our test-lint rule would have complained about this
when the two were merged, but t/perf never learned that trick.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
